Synopsis
/define.gitCommit=768882e3565755e36061ec50f778dc4231e89e61
Running Suite: Podman Machine tests - C:\Users\Administrator\AppData\Local\cirrus-ci-build\repo\pkg\machine\e2e
===============================================================================================================
Random Seed: 1721320115
Will run 58 of 58 specs
[BeforeSuite]
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/machine_test.go:56
→ Enter [
BeforeSuite] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:56 @ 07/18/24 16:29:47.276
Looking up Podman Machine image at quay.io/podman/machine-os:5.2 to create VM
Getting image source signatures
Copying blob sha256:ab2fa485a5dbf32ad0cd6a5994bf9877ebcce035a6620d5c6cfb9520949fb02e
Copying config sha256:44136fa355b3678a1146ad16f7e8649e94fb4fc21fe77e8310c060f61caaff8a
Writing manifest to image destination
ab2fa485a5dbf32ad0cd6a5994bf9877ebcce035a6620d5c6cfb9520949fb02e
← Exit [BeforeSuite] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:56 @ 07/18/24 16:30:11.281 (24.015s)
podman machine proxy settings propagation
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/proxy_test.go:13
ssh to running machine and check proxy settings
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/proxy_test.go:15
→ Enter [
It] ssh to running machine and check proxy settings - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/proxy_test.go:15 @ 07/18/24 16:30:11.407
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 22fe6dde3397
Machine init complete
To start your machine run:
podman machine start 22fe6dde3397
C>
podman.exe machine start 22fe6dde3397
Starting machine "22fe6dde3397"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful 22fe6dde3397
API forwarding listening on: npipe:////./pipe/docker_engine
Docker API clients default to this address. You do not need to set DOCKER_HOST.
Machine "22fe6dde3397" started successfully
C>
podman.exe machine ssh 22fe6dde3397 printenv HTTP_PROXY
http://abcdefghijklmnopqrstuvwxyz-proxy
C>
podman.exe machine ssh 22fe6dde3397 printenv HTTPS_PROXY
http://abcdefghijklmnopqrstuvwxyz-proxy
C>
podman.exe machine ssh 22fe6dde3397 printenv SSL_CERT_DIR SSL_CERT_FILE
/etc/containers/certs.d
/etc/containers/certs.d/cert1
C>
podman.exe machine ssh 22fe6dde3397 cat $SSL_CERT_DIR/cert2 $SSL_CERT_FILE
cert2 content
cert1 content
C>
podman.exe machine stop 22fe6dde3397
Machine "22fe6dde3397" stopped successfully
C>
podman.exe machine start 22fe6dde3397
Starting machine "22fe6dde3397"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful 22fe6dde3397
API forwarding listening on: npipe:////./pipe/docker_engine
Docker API clients default to this address. You do not need to set DOCKER_HOST.
Machine "22fe6dde3397" started successfully
C>
podman.exe machine ssh 22fe6dde3397 printenv HTTP_PROXY HTTPS_PROXY
http:// some special @;" here
https://abc :??$%6 : |""
C>
podman.exe machine ssh 22fe6dde3397 cat $SSL_CERT_DIR/cert2 $SSL_CERT_FILE
cert2 content
cert1 content
← Exit [It] ssh to running machine and check proxy settings - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/proxy_test.go:15 @ 07/18/24 16:31:39.519 (1m28.139s)
podman machine start
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/start_test.go:16
start simple machine
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/start_test.go:18
→ Enter [
It] start simple machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:18 @ 07/18/24 16:31:42.345
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx d7407c9a15ee
Machine init complete
To start your machine run:
podman machine start d7407c9a15ee
C>
podman.exe machine start d7407c9a15ee
Starting machine "d7407c9a15ee"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful d7407c9a15ee
API forwarding listening on: npipe:////./pipe/docker_engine
Docker API clients default to this address. You do not need to set DOCKER_HOST.
Machine "d7407c9a15ee" started successfully
C>
podman.exe machine inspect d7407c9a15ee
[
{
"ConfigDir": {
"Path": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test765949056\\.config\\containers\\podman\\machine\\hyperv"
},
"ConnectionInfo": {
"PodmanSocket": null,
"PodmanPipe": {
"Path": "\\\\.\\pipe\\podman-d7407c9a15ee"
}
},
"Created": "2024-07-18T16:31:42.5010816Z",
"LastUp": "0001-01-01T00:00:00Z",
"Name": "d7407c9a15ee",
"Resources": {
"CPUs": 24,
"DiskSize": 11,
"Memory": 2048,
"USBs": []
},
"SSHConfig": {
"IdentityPath": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test765949056\\.local\\share\\containers\\podman\\machine\\machine",
"Port": 50017,
"RemoteUsername": "core"
},
"State": "running",
"UserModeNetworking": true,
"Rootful": false,
"Rosetta": false
}
]
C>
podman.exe machine stop d7407c9a15ee
Machine "d7407c9a15ee" stopped successfully
C>
podman.exe machine start d7407c9a15ee --no-info
Starting machine "d7407c9a15ee"
Machine "d7407c9a15ee" started successfully
C>
podman.exe machine stop d7407c9a15ee
Machine "d7407c9a15ee" stopped successfully
C>
podman.exe machine start d7407c9a15ee --quiet
Machine "d7407c9a15ee" started successfully
← Exit [It] start simple machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:18 @ 07/18/24 16:33:01.325 (1m18.994s)
podman machine start
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/start_test.go:16
bad start name
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/start_test.go:54
→ Enter [
It] bad start name - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:54 @ 07/18/24 16:33:04.237
C>
podman.exe machine start abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
Error: abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ: VM does not exist
← Exit [It] bad start name - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:54 @ 07/18/24 16:33:04.371 (134ms)
podman machine start
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/start_test.go:16
start machine already started
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/start_test.go:63
→ Enter [
It] start machine already started - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:63 @ 07/18/24 16:33:04.376
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 1a131abf37d6
Machine init complete
To start your machine run:
podman machine start 1a131abf37d6
C>
podman.exe machine start 1a131abf37d6
Starting machine "1a131abf37d6"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful 1a131abf37d6
API forwarding listening on: npipe:////./pipe/docker_engine
Docker API clients default to this address. You do not need to set DOCKER_HOST.
Machine "1a131abf37d6" started successfully
C>
podman.exe machine inspect 1a131abf37d6
[
{
"ConfigDir": {
"Path": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test2087119092\\.config\\containers\\podman\\machine\\hyperv"
},
"ConnectionInfo": {
"PodmanSocket": null,
"PodmanPipe": {
"Path": "\\\\.\\pipe\\podman-1a131abf37d6"
}
},
"Created": "2024-07-18T16:33:04.5280657Z",
"LastUp": "0001-01-01T00:00:00Z",
"Name": "1a131abf37d6",
"Resources": {
"CPUs": 24,
"DiskSize": 11,
"Memory": 2048,
"USBs": []
},
"SSHConfig": {
"IdentityPath": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test2087119092\\.local\\share\\containers\\podman\\machine\\machine",
"Port": 50044,
"RemoteUsername": "core"
},
"State": "running",
"UserModeNetworking": true,
"Rootful": false,
"Rosetta": false
}
]
C>
podman.exe machine start 1a131abf37d6
Starting machine "1a131abf37d6"
Error: unable to start "1a131abf37d6": machine 1a131abf37d6: VM already running or starting
← Exit [It] start machine already started - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:63 @ 07/18/24 16:33:48.097 (43.726s)
podman machine start
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/start_test.go:16
start machine with conflict on SSH port
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/start_test.go:84
→ Enter [
It] start machine with conflict on SSH port - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:84 @ 07/18/24 16:33:51
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 874e29fb55fd
Machine init complete
To start your machine run:
podman machine start 874e29fb55fd
C>
podman.exe machine inspect --format {{.SSHConfig.Port}} 874e29fb55fd
50057
C>
podman.exe system connection list --format {{.URI}}
ssh://core@127.0.0.1:50057/run/user/1000/podman/podman.sock
ssh://root@127.0.0.1:50057/run/podman/podman.sock
C>
podman.exe machine start 874e29fb55fd
Starting machine "874e29fb55fd"
time=
"2024-07-18T16:34:10Z" level=
warning msg=
"detected port conflict on machine ssh port [50057], reassigning"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful 874e29fb55fd
API forwarding listening on: npipe:////./pipe/docker_engine
Docker API clients default to this address. You do not need to set DOCKER_HOST.
Machine "874e29fb55fd" started successfully
C>
podman.exe machine inspect --format {{.SSHConfig.Port}} 874e29fb55fd
50064
C>
podman.exe system connection list --format {{.URI}}
ssh://core@127.0.0.1:50064/run/user/1000/podman/podman.sock
ssh://root@127.0.0.1:50064/run/podman/podman.sock
← Exit [It] start machine with conflict on SSH port - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:84 @ 07/18/24 16:34:34.46 (43.464s)
podman machine start
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/start_test.go:16
start only starts specified machine
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/start_test.go:133
→ Enter [
It] start only starts specified machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:133 @ 07/18/24 16:34:37.362
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 53c338c056c0
Machine init complete
To start your machine run:
podman machine start 53c338c056c0
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 61b00ea898f7
Machine init complete
To start your machine run:
podman machine start 61b00ea898f7
C>
podman.exe machine start 53c338c056c0
Starting machine "53c338c056c0"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful 53c338c056c0
API forwarding listening on: npipe:////./pipe/docker_engine
Docker API clients default to this address. You do not need to set DOCKER_HOST.
Machine "53c338c056c0" started successfully
C>
podman.exe machine inspect --format {{.State}} 53c338c056c0
running
C>
podman.exe machine inspect --format {{.State}} 61b00ea898f7
stopped
← Exit [It] start only starts specified machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:133 @ 07/18/24 16:35:40.925 (1m3.567s)
podman machine start
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/start_test.go:16
start two machines in parallel
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/start_test.go:166
→ Enter [
It] start two machines in parallel - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:166 @ 07/18/24 16:35:45.183
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx m1-326f469e314e
Machine init complete
To start your machine run:
podman machine start m1-326f469e314e
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx m2-67fcbfa7ae04
Machine init complete
To start your machine run:
podman machine start m2-67fcbfa7ae04
C>
podman.exe machine start m1-326f469e314e
C>
podman.exe machine start m2-67fcbfa7ae04
Starting machine "m1-326f469e314e"
Starting machine "m2-67fcbfa7ae04"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful m2-67fcbfa7ae04
API forwarding listening on: npipe:////./pipe/docker_engine
Docker API clients default to this address. You do not need to set DOCKER_HOST.
Machine "m2-67fcbfa7ae04" started successfully
Error: unable to start "m1-326f469e314e": machine m2-67fcbfa7ae04: VM already running or starting
← Exit [It] start two machines in parallel - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:166 @ 07/18/24 16:36:46.323 (1m1.143s)
podman machine reset
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/reset_test.go:9
starting from scratch should not error
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/reset_test.go:11
→ Enter [
It] starting from scratch should not error - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/reset_test.go:11 @ 07/18/24 16:36:50.592
C>
podman.exe machine reset --force
← Exit [It] starting from scratch should not error - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/reset_test.go:11 @ 07/18/24 16:36:50.73 (138ms)
podman machine reset
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/reset_test.go:9
reset machine with one defined machine
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/reset_test.go:18
→ Enter [
It] reset machine with one defined machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/reset_test.go:18 @ 07/18/24 16:36:50.733
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx fb02a1e24d02
Machine init complete
To start your machine run:
podman machine start fb02a1e24d02
C>
podman.exe machine list --noheading
fb02a1e24d02* hyperv 21 seconds ago Never 24 2GiB 11GiB
C>
podman.exe machine reset --force
C>
podman.exe machine list --noheading
← Exit [It] reset machine with one defined machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/reset_test.go:18 @ 07/18/24 16:37:14.235 (23.502s)
podman machine reset
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/reset_test.go:9
reset with running machine and other machines idle
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/reset_test.go:42
→ Enter [
It] reset with running machine and other machines idle - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/reset_test.go:42 @ 07/18/24 16:37:14.354
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx --now 7948264cfd8a
Machine init complete
Starting machine "7948264cfd8a"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful 7948264cfd8a
API forwarding listening on: npipe:////./pipe/docker_engine
Docker API clients default to this address. You do not need to set DOCKER_HOST.
Machine "7948264cfd8a" started successfully
C>
podman.exe machine list --noheading
7948264cfd8a* hyperv 47 seconds ago Currently running 24 2GiB 11GiB
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 4797f8b550d8
Machine init complete
To start your machine run:
podman machine start 4797f8b550d8
C>
podman.exe machine list --noheading
7948264cfd8a* hyperv About a minute ago Currently running 24 2GiB 11GiB
4797f8b550d8 hyperv 20 seconds ago Never 24 2GiB 11GiB
C>
podman.exe machine reset --force
C>
podman.exe machine list --noheading
← Exit [It] reset with running machine and other machines idle - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/reset_test.go:42 @ 07/18/24 16:38:25.962 (1m11.609s)
podman machine set
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/set_test.go:15
set machine cpus, disk, memory
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/set_test.go:17
→ Enter [
It] set machine cpus, disk, memory - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:17 @ 07/18/24 16:38:26.217
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx fb124ac827fb
Machine init complete
To start your machine run:
podman machine start fb124ac827fb
C>
podman.exe machine set --memory 524288 fb124ac827fb
Error: requested amount of memory (524288 MB) greater than total system memory (205773746176 MB)
C>
podman.exe machine set --cpus 2 --disk-size 102 --memory 4096 fb124ac827fb
C>
podman.exe machine set --cpus 2 --disk-size 5 --memory 4096 fb124ac827fb
Error: new disk size must be larger than 102 GB
C>
podman.exe machine start fb124ac827fb
Starting machine "fb124ac827fb"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful fb124ac827fb
API forwarding listening on: npipe:////./pipe/docker_engine
Docker API clients default to this address. You do not need to set DOCKER_HOST.
Machine "fb124ac827fb" started successfully
C>
podman.exe machine ssh fb124ac827fb lscpu | grep "CPU(s):" | head -1
CPU(s): 2
C>
podman.exe machine ssh fb124ac827fb sudo fdisk -l | grep Disk
Disk /dev/sda: 102 GiB, 109521666048 bytes, 213909504 sectors
Disk model: Virtual Disk
Disklabel type: gpt
Disk identifier: 069C1372-5D42-4605-8C0D-8950165595C2
C>
podman.exe machine ssh fb124ac827fb cat /proc/meminfo | grep -i 'memtotal' | grep -o '[[:digit:]]*'
4002240
C>
podman.exe machine set --cpus 4 --disk-size 5 --memory 4096 fb124ac827fb
Error: new disk size must be larger than 102 GB
← Exit [It] set machine cpus, disk, memory - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:17 @ 07/18/24 16:39:30.928 (1m4.712s)
podman machine set
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/set_test.go:15
wsl cannot change disk, memory, processor
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/set_test.go:72
→ Enter [
It] wsl cannot change disk, memory, processor - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:72 @ 07/18/24 16:39:33.703
[SKIPPED] tests are only for WSL provider
In [It] at: C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_test.go:260 @ 07/18/24 16:39:33.703
Full Stack Trace
github.com/containers/podman/v5/pkg/machine/e2e_test.skipIfNotVmtype(0x1, {0x7ff74f3183cb, 0x1f})
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_test.go:260 +0x5b
github.com/containers/podman/v5/pkg/machine/e2e_test.init.func15.2()
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:73 +0x30
← Exit [It] wsl cannot change disk, memory, processor - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:72 @ 07/18/24 16:39:33.703 (0s)
podman machine set
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/set_test.go:15
no settings should change if no flags
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/set_test.go:97
→ Enter [
It] no settings should change if no flags - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:97 @ 07/18/24 16:39:33.703
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 4348c1e0a5bf
Machine init complete
To start your machine run:
podman machine start 4348c1e0a5bf
C>
podman.exe machine set 4348c1e0a5bf
C>
podman.exe machine start 4348c1e0a5bf
Starting machine "4348c1e0a5bf"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful 4348c1e0a5bf
API forwarding listening on: npipe:////./pipe/docker_engine
Docker API clients default to this address. You do not need to set DOCKER_HOST.
Machine "4348c1e0a5bf" started successfully
C>
podman.exe machine ssh 4348c1e0a5bf lscpu | grep "CPU(s):" | head -1
CPU(s): 24
C>
podman.exe machine ssh 4348c1e0a5bf sudo fdisk -l | grep Disk
Disk /dev/sda: 11 GiB, 11811160064 bytes, 23068672 sectors
Disk model: Virtual Disk
Disklabel type: gpt
Disk identifier: F691A2F7-9135-42E4-8870-5A076F91A41A
← Exit [It] no settings should change if no flags - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:97 @ 07/18/24 16:40:22.434 (48.732s)
podman machine set
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/set_test.go:15
set rootful with docker sock change
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/set_test.go:132
→ Enter [
It] set rootful with docker sock change - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:132 @ 07/18/24 16:40:25.188
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 497760bf9fcf
Machine init complete
To start your machine run:
podman machine start 497760bf9fcf
C>
podman.exe machine set --rootful 497760bf9fcf
C>
podman.exe machine start 497760bf9fcf
Starting machine "497760bf9fcf"
API forwarding listening on: npipe:////./pipe/docker_engine
Docker API clients default to this address. You do not need to set DOCKER_HOST.
Machine "497760bf9fcf" started successfully
C>
podman.exe machine inspect --format {{.Rootful}} 497760bf9fcf
true
C>
podman.exe machine ssh 497760bf9fcf readlink /var/run/docker.sock
/run/podman/podman.sock
← Exit [It] set rootful with docker sock change - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:132 @ 07/18/24 16:41:10.447 (45.26s)
podman machine set
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/set_test.go:15
set user mode networking
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/set_test.go:164
→ Enter [
It] set user mode networking - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:164 @ 07/18/24 16:41:13.228
[SKIPPED] Test is only for WSL
In [It] at: C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:166 @ 07/18/24 16:41:13.228
Full Stack Trace
github.com/containers/podman/v5/pkg/machine/e2e_test.init.func15.5()
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:166 +0x4f
← Exit [It] set user mode networking - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:164 @ 07/18/24 16:41:13.228 (0s)
podman machine set
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/set_test.go:15
set while machine already running
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/set_test.go:190
→ Enter [
It] set while machine already running - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:190 @ 07/18/24 16:41:13.228
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx cb53513f9b7e
Machine init complete
To start your machine run:
podman machine start cb53513f9b7e
C>
podman.exe machine start cb53513f9b7e
Starting machine "cb53513f9b7e"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful cb53513f9b7e
API forwarding listening on: npipe:////./pipe/docker_engine
Docker API clients default to this address. You do not need to set DOCKER_HOST.
Machine "cb53513f9b7e" started successfully
C>
podman.exe machine set --rootful cb53513f9b7e
Error: unable to change settings unless vm is stopped
← Exit [It] set while machine already running - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:190 @ 07/18/24 16:41:58.858 (45.627s)
podman machine init
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/init_test.go:22
bad init
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/init_test.go:28
→ Enter [
It] bad init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:28 @ 07/18/24 16:42:01.665
C>
podman.exe machine init --disk-size 11 abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
Error: machine name "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ" must be 30 characters or less
C>
podman.exe machine init --disk-size 11 hyperv
Error: cannot use "hyperv" for a machine name
C>
podman.exe -r system connection add foobar tcp://localhost:8000
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx foobar
Error: system connection "foobar" already exists. consider a different machine name or remove the connection with `podman system connection rm`
C>
podman.exe machine init --disk-size 11 ab/cd
Error: invalid name "ab/cd": names must match [a-zA-Z0-9][a-zA-Z0-9_.-]*: invalid argument
C>
podman.exe machine init --disk-size 11 --username -/a f6bf70d89966
Error: invalid username "-/a": names must match [a-zA-Z0-9][a-zA-Z0-9_.-]*: invalid argument
C>
podman.exe machine init --disk-size 11 --memory 197265 f6bf70d89966
Error: requested amount of memory (197265 MB) greater than total system memory (205773746176 MB)
C>
podman.exe -r system connection rm foobar
← Exit [It] bad init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:28 @ 07/18/24 16:42:02.772 (1.107s)
podman machine init
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/init_test.go:22
simple init
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/init_test.go:82
→ Enter [
It] simple init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:82 @ 07/18/24 16:42:03.585
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx e4c655aed2af
Machine init complete
To start your machine run:
podman machine start e4c655aed2af
C>
podman.exe machine inspect e4c655aed2af
[
{
"ConfigDir": {
"Path": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test3496432203\\.config\\containers\\podman\\machine\\hyperv"
},
"ConnectionInfo": {
"PodmanSocket": null,
"PodmanPipe": {
"Path": "\\\\.\\pipe\\podman-e4c655aed2af"
}
},
"Created": "2024-07-18T16:42:03.7430349Z",
"LastUp": "0001-01-01T00:00:00Z",
"Name": "e4c655aed2af",
"Resources": {
"CPUs": 24,
"DiskSize": 11,
"Memory": 2048,
"USBs": []
},
"SSHConfig": {
"IdentityPath": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test3496432203\\.local\\share\\containers\\podman\\machine\\machine",
"Port": 50251,
"RemoteUsername": "core"
},
"State": "stopped",
"UserModeNetworking": true,
"Rootful": false,
"Rosetta": false
}
]
← Exit [It] simple init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:82 @ 07/18/24 16:42:23.521 (19.93s)
podman machine init
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/init_test.go:22
simple init with start
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/init_test.go:101
→ Enter [
It] simple init with start - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:101 @ 07/18/24 16:42:24.821
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx c88e1f616a0c
Machine init complete
To start your machine run:
podman machine start c88e1f616a0c
C>
podman.exe machine inspect c88e1f616a0c
[
{
"ConfigDir": {
"Path": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test2672903503\\.config\\containers\\podman\\machine\\hyperv"
},
"ConnectionInfo": {
"PodmanSocket": null,
"PodmanPipe": {
"Path": "\\\\.\\pipe\\podman-c88e1f616a0c"
}
},
"Created": "2024-07-18T16:42:24.9829036Z",
"LastUp": "0001-01-01T00:00:00Z",
"Name": "c88e1f616a0c",
"Resources": {
"CPUs": 24,
"DiskSize": 11,
"Memory": 2048,
"USBs": []
},
"SSHConfig": {
"IdentityPath": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test2672903503\\.local\\share\\containers\\podman\\machine\\machine",
"Port": 50257,
"RemoteUsername": "core"
},
"State": "stopped",
"UserModeNetworking": true,
"Rootful": false,
"Rosetta": false
}
]
C>
podman.exe machine start c88e1f616a0c
Starting machine "c88e1f616a0c"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful c88e1f616a0c
API forwarding listening on: npipe:////./pipe/docker_engine
Docker API clients default to this address. You do not need to set DOCKER_HOST.
Machine "c88e1f616a0c" started successfully
C>
podman.exe machine inspect c88e1f616a0c
[
{
"ConfigDir": {
"Path": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test2672903503\\.config\\containers\\podman\\machine\\hyperv"
},
"ConnectionInfo": {
"PodmanSocket": null,
"PodmanPipe": {
"Path": "\\\\.\\pipe\\podman-c88e1f616a0c"
}
},
"Created": "2024-07-18T16:42:24.9829036Z",
"LastUp": "0001-01-01T00:00:00Z",
"Name": "c88e1f616a0c",
"Resources": {
"CPUs": 24,
"DiskSize": 11,
"Memory": 2048,
"USBs": []
},
"SSHConfig": {
"IdentityPath": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test2672903503\\.local\\share\\containers\\podman\\machine\\machine",
"Port": 50257,
"RemoteUsername": "core"
},
"State": "running",
"UserModeNetworking": true,
"Rootful": false,
"Rosetta": false
}
]
C>
podman.exe machine ssh c88e1f616a0c sudo systemctl is-enabled zincati
disabled
← Exit [It] simple init with start - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:101 @ 07/18/24 16:43:10.618 (45.786s)
podman machine init
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/init_test.go:22
simple init with username
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/init_test.go:137
→ Enter [
It] simple init with username - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:137 @ 07/18/24 16:43:13.501
C>
podman.exe machine init --disk-size 11 --username remoteuser --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 25f682ca3517
Machine init complete
To start your machine run:
podman machine start 25f682ca3517
C>
podman.exe machine inspect 25f682ca3517
[
{
"ConfigDir": {
"Path": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test3545853918\\.config\\containers\\podman\\machine\\hyperv"
},
"ConnectionInfo": {
"PodmanSocket": null,
"PodmanPipe": {
"Path": "\\\\.\\pipe\\podman-25f682ca3517"
}
},
"Created": "2024-07-18T16:43:13.6559839Z",
"LastUp": "0001-01-01T00:00:00Z",
"Name": "25f682ca3517",
"Resources": {
"CPUs": 24,
"DiskSize": 11,
"Memory": 2048,
"USBs": []
},
"SSHConfig": {
"IdentityPath": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test3545853918\\.local\\share\\containers\\podman\\machine\\machine",
"Port": 50272,
"RemoteUsername": "remoteuser"
},
"State": "stopped",
"UserModeNetworking": true,
"Rootful": false,
"Rosetta": false
}
]
← Exit [It] simple init with username - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:137 @ 07/18/24 16:43:33.309 (19.805s)
podman machine init
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/init_test.go:22
machine init with cpus, disk size, memory, timezone
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/init_test.go:159
→ Enter [
It] machine init with cpus, disk size, memory, timezone - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:159 @ 07/18/24 16:43:34.657
C>
podman.exe machine init --cpus 2 --disk-size 102 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx --memory 4096 --timezone Pacific/Honolulu 4baef429e889
Machine init complete
To start your machine run:
podman machine start 4baef429e889
C>
podman.exe machine start 4baef429e889
Starting machine "4baef429e889"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful 4baef429e889
Error: ssh: handshake failed: read tcp 127.0.0.1:50293->127.0.0.1:50280: wsarecv: An existing connection was forcibly closed by the remote host.
[FAILED] Expected
<int>: 125
to match exit code:
<int>: 0
In [It] at: C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:170 @ 07/18/24 16:45:36.312
Full Stack Trace
github.com/containers/podman/v5/pkg/machine/e2e_test.init.func9.5()
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:170 +0x3a2
← Exit [It] machine init with cpus, disk size, memory, timezone - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:159 @ 07/18/24 16:45:36.312 (2m1.64s)
podman machine init
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/init_test.go:22
machine init with volume
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/init_test.go:200
→ Enter [
It] machine init with volume - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:200 @ 07/18/24 16:45:39.148
[SKIPPED] volumes are not supported on hyperv yet
In [It] at: C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:202 @ 07/18/24 16:45:39.148
Full Stack Trace
github.com/containers/podman/v5/pkg/machine/e2e_test.init.func9.6()
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:202 +0x65
← Exit [It] machine init with volume - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:200 @ 07/18/24 16:45:39.148 (0s)
podman machine init
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/init_test.go:22
machine init rootless docker.sock check
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/init_test.go:227
→ Enter [
It] machine init rootless docker.sock check - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:227 @ 07/18/24 16:45:39.148
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx d57e6966710d
Machine init complete
To start your machine run:
podman machine start d57e6966710d
C>
podman.exe machine start d57e6966710d
Starting machine "d57e6966710d"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful d57e6966710d
API forwarding listening on: npipe:////./pipe/docker_engine
Docker API clients default to this address. You do not need to set DOCKER_HOST.
Machine "d57e6966710d" started successfully
C>
podman.exe machine ssh d57e6966710d readlink /var/run/docker.sock
/run/user/1000/podman/podman.sock
← Exit [It] machine init rootless docker.sock check - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:227 @ 07/18/24 16:46:28.884 (49.733s)
podman machine init
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/init_test.go:22
machine init rootful with docker.sock check
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/init_test.go:250
→ Enter [
It] machine init rootful with docker.sock check - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:250 @ 07/18/24 16:46:31.81
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx --rootful 1a3b8db4dbe4
Machine init complete
To start your machine run:
podman machine start 1a3b8db4dbe4
C>
podman.exe machine start 1a3b8db4dbe4
Starting machine "1a3b8db4dbe4"
API forwarding listening on: npipe:////./pipe/docker_engine
Docker API clients default to this address. You do not need to set DOCKER_HOST.
Machine "1a3b8db4dbe4" started successfully
C>
podman.exe machine inspect --format {{.Rootful}} 1a3b8db4dbe4
true
C>
podman.exe machine ssh 1a3b8db4dbe4 readlink /var/run/docker.sock
/run/podman/podman.sock
← Exit [It] machine init rootful with docker.sock check - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:250 @ 07/18/24 16:47:19.619 (47.807s)
podman machine init
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/init_test.go:22
init should cleanup on failure
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/init_test.go:277
→ Enter [
It] init should cleanup on failure - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:277 @ 07/18/24 16:47:22.483
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx f8badf632cc0
Machine init complete
To start your machine run:
podman machine start f8badf632cc0
C>
podman.exe machine inspect --format {{.ConfigDir.Path}} f8badf632cc0
C:\Users\ADMINI~1\AppData\Local\Temp\podman_test4068694971\.config\containers\podman\machine\hyperv
C>
podman.exe machine rm --force f8badf632cc0
C>
podman.exe machine inspect f8badf632cc0
[]
Error: f8badf632cc0: VM does not exist
C>
podman.exe machine init --disk-size 11 --ignition-path /bad/path --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx f8badf632cc0
Error: open /bad/path: The system cannot find the path specified.
← Exit [It] init should cleanup on failure - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:277 @ 07/18/24 16:47:46.89 (24.406s)
podman machine init
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/init_test.go:22
verify a podman 4 config does not break podman 5
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/init_test.go:326
→ Enter [
It] verify a podman 4 config does not break podman 5 - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:326 @ 07/18/24 16:47:47.127
C>
podman.exe machine list
time=
"2024-07-18T16:47:47Z" level=
error msg=
"incompatible machine config \"C:\\\\Users\\\\ADMINI~1\\\\AppData\\\\Local\\\\Temp\\\\podman_test2684010606\\\\.config\\\\containers\\\\podman\\\\machine\\\\hyperv\\\\foobar-machine.json\" (podman-machine-default) for this version of Podman"
NAME VM TYPE CREATED LAST UP CPUS MEMORY DISK SIZE
C>
podman.exe machine inspect foobar-machine
[]
Error: incompatible machine config "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test2684010606\\.config\\containers\\podman\\machine\\hyperv\\foobar-machine.json" (foobar-machine) for this version of Podman
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 4d444e785020
time=
"2024-07-18T16:47:47Z" level=
error msg=
"incompatible machine config \"C:\\\\Users\\\\ADMINI~1\\\\AppData\\\\Local\\\\Temp\\\\podman_test2684010606\\\\.config\\\\containers\\\\podman\\\\machine\\\\hyperv\\\\foobar-machine.json\" (podman-machine-default) for this version of Podman"
Machine init complete
To start your machine run:
podman machine start 4d444e785020
C>
podman.exe machine list
time=
"2024-07-18T16:48:08Z" level=
error msg=
"incompatible machine config \"C:\\\\Users\\\\ADMINI~1\\\\AppData\\\\Local\\\\Temp\\\\podman_test2684010606\\\\.config\\\\containers\\\\podman\\\\machine\\\\hyperv\\\\foobar-machine.json\" (podman-machine-default) for this version of Podman"
NAME VM TYPE CREATED LAST UP CPUS MEMORY DISK SIZE
4d444e785020* hyperv 20 seconds ago Never 24 2GiB 11GiB
C>
podman.exe machine inspect 4d444e785020
[
{
"ConfigDir": {
"Path": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test2684010606\\.config\\containers\\podman\\machine\\hyperv"
},
"ConnectionInfo": {
"PodmanSocket": null,
"PodmanPipe": {
"Path": "\\\\.\\pipe\\podman-4d444e785020"
}
},
"Created": "2024-07-18T16:47:47.5386756Z",
"LastUp": "0001-01-01T00:00:00Z",
"Name": "4d444e785020",
"Resources": {
"CPUs": 24,
"DiskSize": 11,
"Memory": 2048,
"USBs": []
},
"SSHConfig": {
"IdentityPath": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test2684010606\\.local\\share\\containers\\podman\\machine\\machine",
"Port": 50332,
"RemoteUsername": "core"
},
"State": "stopped",
"UserModeNetworking": true,
"Rootful": false,
"Rosetta": false
}
]
← Exit [It] verify a podman 4 config does not break podman 5 - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:326 @ 07/18/24 16:48:08.661 (21.534s)
podman machine init
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/init_test.go:22
machine init with rosetta=true
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/init_test.go:374
→ Enter [
It] machine init with rosetta=true - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:374 @ 07/18/24 16:48:10.059
[SKIPPED] Test is only for AppleHv
In [It] at: C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_test.go:254 @ 07/18/24 16:48:10.059
Full Stack Trace
github.com/containers/podman/v5/pkg/machine/e2e_test.skipIfVmtype(0x3, {0x7ff74f30aa0e, 0x18})
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_test.go:254 +0x5b
github.com/containers/podman/v5/pkg/machine/e2e_test.init.func9.11()
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:377 +0x5c
← Exit [It] machine init with rosetta=true - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:374 @ 07/18/24 16:48:10.059 (0s)
podman machine init
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/init_test.go:22
machine init with rosetta=false
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/init_test.go:419
→ Enter [
It] machine init with rosetta=false - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:419 @ 07/18/24 16:48:10.059
[SKIPPED] Test is only for AppleHv
In [It] at: C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_test.go:254 @ 07/18/24 16:48:10.059
Full Stack Trace
github.com/containers/podman/v5/pkg/machine/e2e_test.skipIfVmtype(0x3, {0x7ff74f30aa0e, 0x18})
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_test.go:254 +0x5b
github.com/containers/podman/v5/pkg/machine/e2e_test.init.func9.12()
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:422 +0x5c
← Exit [It] machine init with rosetta=false - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:419 @ 07/18/24 16:48:10.059 (0s)
podman machine ssh
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/ssh_test.go:10
bad machine name
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/ssh_test.go:12
→ Enter [
It] bad machine name - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/ssh_test.go:12 @ 07/18/24 16:48:10.059
C>
podman.exe machine ssh f71088ec0fbd
Error: vm podman-machine-default not found: podman-machine-default: VM does not exist
← Exit [It] bad machine name - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/ssh_test.go:12 @ 07/18/24 16:48:10.195 (136ms)
podman machine ssh
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/ssh_test.go:10
ssh to non-running machine
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/ssh_test.go:21
→ Enter [
It] ssh to non-running machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/ssh_test.go:21 @ 07/18/24 16:48:10.199
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 1f6aefb616c8
Machine init complete
To start your machine run:
podman machine start 1f6aefb616c8
C>
podman.exe machine ssh 1f6aefb616c8
Error: vm "1f6aefb616c8" is not running
← Exit [It] ssh to non-running machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/ssh_test.go:21 @ 07/18/24 16:48:30.853 (20.653s)
podman machine ssh
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/ssh_test.go:10
ssh to running machine and check os-type
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/ssh_test.go:35
→ Enter [
It] ssh to running machine and check os-type - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/ssh_test.go:35 @ 07/18/24 16:48:32.201
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx --now 6b995ddeefe8
Machine init complete
Starting machine "6b995ddeefe8"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful 6b995ddeefe8
API forwarding listening on: npipe:////./pipe/docker_engine
Docker API clients default to this address. You do not need to set DOCKER_HOST.
Machine "6b995ddeefe8" started successfully
C>
podman.exe machine ssh 6b995ddeefe8 cat /etc/os-release
NAME="Fedora Linux"
VERSION="40.20240519.2.0 (CoreOS)"
ID=fedora
VERSION_ID=40
VERSION_CODENAME=""
PLATFORM_ID="platform:f40"
PRETTY_NAME="Fedora CoreOS 40.20240519.2.0"
ANSI_COLOR="0;38;2;60;110;180"
LOGO=fedora-logo-icon
CPE_NAME="cpe:/o:fedoraproject:fedora:40"
HOME_URL="https://getfedora.org/coreos/"
DOCUMENTATION_URL="https://docs.fedoraproject.org/en-US/fedora-coreos/"
SUPPORT_URL="https://github.com/coreos/fedora-coreos-tracker/"
BUG_REPORT_URL="https://github.com/coreos/fedora-coreos-tracker/"
REDHAT_BUGZILLA_PRODUCT="Fedora"
REDHAT_BUGZILLA_PRODUCT_VERSION=40
REDHAT_SUPPORT_PRODUCT="Fedora"
REDHAT_SUPPORT_PRODUCT_VERSION=40
SUPPORT_END=2025-05-13
VARIANT="CoreOS"
VARIANT_ID=coreos
OSTREE_VERSION='40.20240519.2.0'
C>
podman.exe machine ssh 6b995ddeefe8 false
← Exit [It] ssh to running machine and check os-type - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/ssh_test.go:35 @ 07/18/24 16:49:18.19 (45.988s)
podman machine init - windows only
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/init_windows_test.go:17
init with user mode networking
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/init_windows_test.go:19
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/machine_test.go:187 @ 07/18/24 16:49:21.274
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/machine_test.go:187 @ 07/18/24 16:49:21.274 (0s)
S [SKIPPED] [0.000 seconds]
podman machine init - windows only
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/init_windows_test.go:17
[It] init with user mode networking
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/init_windows_test.go:19
podman machine init - windows only
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/init_windows_test.go:17
init should not should not overwrite existing HyperV vms
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/init_windows_test.go:49
→ Enter [
It] init should not should not overwrite existing HyperV vms - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_windows_test.go:49 @ 07/18/24 16:49:21.274
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 3fb03a82ff82
Error: vm "3fb03a82ff82" already exists on hypervisor
← Exit [It] init should not should not overwrite existing HyperV vms - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_windows_test.go:49 @ 07/18/24 16:49:22.682 (1.407s)
podman machine init - windows only
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/init_windows_test.go:17
init should not overwrite existing WSL vms
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/init_windows_test.go:84
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/machine_test.go:187 @ 07/18/24 16:49:22.828
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/machine_test.go:187 @ 07/18/24 16:49:22.829 (1ms)
S [SKIPPED] [0.002 seconds]
podman machine init - windows only
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/init_windows_test.go:17
[It] init should not overwrite existing WSL vms
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/init_windows_test.go:84
podman machine stop
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/stop_test.go:12
stop bad name
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/stop_test.go:14
→ Enter [
It] stop bad name - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/stop_test.go:14 @ 07/18/24 16:49:22.829
C>
podman.exe machine stop abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
Error: abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ: VM does not exist
← Exit [It] stop bad name - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/stop_test.go:14 @ 07/18/24 16:49:22.961 (132ms)
podman machine stop
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/stop_test.go:12
Stop running machine
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/stop_test.go:22
→ Enter [
It] Stop running machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/stop_test.go:22 @ 07/18/24 16:49:22.967
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx --now fbfc0fc41e9d
Machine init complete
Starting machine "fbfc0fc41e9d"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful fbfc0fc41e9d
API forwarding listening on: npipe:////./pipe/docker_engine
Docker API clients default to this address. You do not need to set DOCKER_HOST.
Machine "fbfc0fc41e9d" started successfully
C>
podman.exe machine stop fbfc0fc41e9d
Machine "fbfc0fc41e9d" stopped successfully
C>
podman.exe machine stop fbfc0fc41e9d
Machine "fbfc0fc41e9d" stopped successfully
C>
podman.exe machine inspect --format {{.LastUp.Format "2006-01-02T15:04:05Z07:00"}} fbfc0fc41e9d
2024-07-18T16:50:08Z
← Exit [It] Stop running machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/stop_test.go:22 @ 07/18/24 16:50:08.871 (45.903s)
run basic podman commands
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/basic_test.go:20
Basic ops
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/basic_test.go:22
→ Enter [
It] Basic ops - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/basic_test.go:22 @ 07/18/24 16:50:10.223
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx --now f185dce99d12
Machine init complete
Starting machine "f185dce99d12"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful f185dce99d12
API forwarding listening on: npipe:////./pipe/docker_engine
Docker API clients default to this address. You do not need to set DOCKER_HOST.
Machine "f185dce99d12" started successfully
C>
podman.exe -r images -q
C>
podman.exe -r pull quay.io/libpod/alpine_nginx
Trying to pull quay.io/libpod/alpine_nginx:latest...
Getting image source signatures
Copying blob sha256:df9b9388f04ad6279a7410b85cedfdcb2208c0a003da7ab5613af71079148139
Copying blob sha256:d2c7362ca710ad35a846a34571a7c3450ea3cce04efcbcb4d3af276eda154ade
Copying blob sha256:71895e83ea49901b7b752bbf3ca19a54148a5f4ab5fdff3dca9bcd59d44c59e3
Copying config sha256:ecea49d99daa5bd62ebaef1338f6bc4c948bf2651b139160404f9c1c48fcd85c
Writing manifest to image destination
ecea49d99daa5bd62ebaef1338f6bc4c948bf2651b139160404f9c1c48fcd85c
C>
podman.exe -r run quay.io/libpod/alpine_nginx cat /etc/os-release
NAME="Alpine Linux"
ID=alpine
VERSION_ID=3.15.4
PRETTY_NAME="Alpine Linux v3.15"
HOME_URL="https://alpinelinux.org/"
BUG_REPORT_URL="https://bugs.alpinelinux.org/"
C>
podman.exe -r build C:\Users\ADMINI~1\AppData\Local\Temp\ginkgo3333104759
STEP 1/2: FROM quay.io/libpod/alpine_nginx
STEP 2/2: RUN ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: vsock0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 65520 qdisc fq_codel state UNKNOWN qlen 1000
link/ether c6:9c:a4:ad:d8:da brd ff:ff:ff:ff:ff:ff
inet 192.168.127.2/24 brd 192.168.127.255 scope global noprefixroute vsock0
valid_lft forever preferred_lft forever
inet6 fe80::c49c:a4ff:fead:d8da/64 scope link tentative
valid_lft forever preferred_lft forever
COMMIT
time=
"2024-07-18T16:50:56Z" level=
warning msg=
"HEALTHCHECK is not supported for OCI image format and will be ignored. Must use `docker` format"
--> 812b57f8d2fb
812b57f8d2fb753ffc2f244f7c293c2ea6831c86fda23189568a249a4efeee5b
C>
podman.exe -r rm -a
5d78f525b4fa2602a8e07781cead0f5b380572a550e863bae8c51e6abe4fe6ae
← Exit [It] Basic ops - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/basic_test.go:22 @ 07/18/24 16:50:56.605 (46.382s)
run basic podman commands
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/basic_test.go:20
Volume ops
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/basic_test.go:62
→ Enter [
It] Volume ops - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/basic_test.go:62 @ 07/18/24 16:50:59.41
[SKIPPED] FIXME: #21036 - Hyper-V podman run -v fails due to path translation issues
In [It] at: C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_test.go:254 @ 07/18/24 16:50:59.41
Full Stack Trace
github.com/containers/podman/v5/pkg/machine/e2e_test.skipIfVmtype(0x3, {0x7ff74f34b8e0, 0x4a})
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_test.go:254 +0x5b
github.com/containers/podman/v5/pkg/machine/e2e_test.init.func5.2()
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/basic_test.go:63 +0x30
← Exit [It] Volume ops - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/basic_test.go:62 @ 07/18/24 16:50:59.41 (0s)
run basic podman commands
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/basic_test.go:20
Volume should be virtiofs
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/basic_test.go:93
→ Enter [
It] Volume should be virtiofs - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/basic_test.go:93 @ 07/18/24 16:50:59.41
[SKIPPED] This is just adding coverage for virtiofs on linux
In [It] at: C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_test.go:260 @ 07/18/24 16:50:59.41
Full Stack Trace
github.com/containers/podman/v5/pkg/machine/e2e_test.skipIfNotVmtype(0x0, {0x7ff74f338917, 0x32})
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_test.go:260 +0x5b
github.com/containers/podman/v5/pkg/machine/e2e_test.init.func5.3()
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/basic_test.go:96 +0x2d
← Exit [It] Volume should be virtiofs - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/basic_test.go:93 @ 07/18/24 16:50:59.41 (0s)
run basic podman commands
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/basic_test.go:20
Podman ops with port forwarding and gvproxy
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/basic_test.go:120
→ Enter [
It] Podman ops with port forwarding and gvproxy - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/basic_test.go:120 @ 07/18/24 16:50:59.41
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx --now 09ad6f0c6fff
Machine init complete
Starting machine "09ad6f0c6fff"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful 09ad6f0c6fff
API forwarding listening on: npipe:////./pipe/docker_engine
Docker API clients default to this address. You do not need to set DOCKER_HOST.
Machine "09ad6f0c6fff" started successfully
C>
podman.exe -r run -dt --name test -p 62544:80 quay.io/libpod/alpine_nginx
Trying to pull quay.io/libpod/alpine_nginx:latest...
Getting image source signatures
Copying blob sha256:d2c7362ca710ad35a846a34571a7c3450ea3cce04efcbcb4d3af276eda154ade
Copying blob sha256:df9b9388f04ad6279a7410b85cedfdcb2208c0a003da7ab5613af71079148139
Copying blob sha256:71895e83ea49901b7b752bbf3ca19a54148a5f4ab5fdff3dca9bcd59d44c59e3
Copying config sha256:ecea49d99daa5bd62ebaef1338f6bc4c948bf2651b139160404f9c1c48fcd85c
Writing manifest to image destination
fe4d3a88450d09865471cfcf894fd5f0087cdfb1f7a96cc1efb548004a473da5
C>
podman.exe -r exec test true
C>
podman.exe -r rm -af
fe4d3a88450d09865471cfcf894fd5f0087cdfb1f7a96cc1efb548004a473da5
C>
podman.exe machine stop 09ad6f0c6fff
Machine "09ad6f0c6fff" stopped successfully
← Exit [It] Podman ops with port forwarding and gvproxy - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/basic_test.go:120 @ 07/18/24 16:51:46.433 (47.023s)
run basic podman commands
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/basic_test.go:20
podman volume on non-standard path
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/basic_test.go:158
→ Enter [
It] podman volume on non-standard path - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/basic_test.go:158 @ 07/18/24 16:51:47.734
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx --volume C:\Users\ADMINI~1\AppData\Local\Temp\machine-volume1182527905:/does/not/exist --now c88f2f6760e7
Machine init complete
Starting machine "c88f2f6760e7"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful c88f2f6760e7
API forwarding listening on: npipe:////./pipe/docker_engine
Docker API clients default to this address. You do not need to set DOCKER_HOST.
Machine "c88f2f6760e7" started successfully
C>
podman.exe machine ssh c88f2f6760e7 cat /does/not/exist/testfile
abcdefg1234567 < Exit [It] podman volume on non-standard path - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/basic_test.go:158 @ 07/18/24 16:52:35.31 (47.576s)
> Enter [DeferCleanup (Each)] run basic podman commands - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/18/24 16:52:35.31
C>
podman.exe machine rm --force c88f2f6760e7
< Exit [DeferCleanup (Each)] run basic podman commands - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/18/24 16:52:38.209 (2.899s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/18/24 16:52:38.209
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/18/24 16:52:38.209 (0s)
+ [50.475 seconds]
podman machine rm
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/rm_test.go:14
bad init name
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/rm_test.go:16
→ Enter [
It] bad init name - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/rm_test.go:16 @ 07/18/24 16:52:38.215
C>
podman.exe machine rm abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
Error: abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ: VM does not exist
← Exit [It] bad init name - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/rm_test.go:16 @ 07/18/24 16:52:38.345 (131ms)
podman machine rm
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/rm_test.go:14
Remove machine
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/rm_test.go:24
→ Enter [
It] Remove machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/rm_test.go:24 @ 07/18/24 16:52:38.35
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx b6016fc5dfd6
Machine init complete
To start your machine run:
podman machine start b6016fc5dfd6
C>
podman.exe machine rm --force b6016fc5dfd6
C>
podman.exe machine inspect b6016fc5dfd6
[]
Error: b6016fc5dfd6: VM does not exist
C>
podman.exe machine rm --force b6016fc5dfd6
Error: b6016fc5dfd6: VM does not exist
← Exit [It] Remove machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/rm_test.go:24 @ 07/18/24 16:53:01.341 (22.99s)
podman machine rm
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/rm_test.go:14
Remove running machine
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/rm_test.go:48
→ Enter [
It] Remove running machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/rm_test.go:48 @ 07/18/24 16:53:01.465
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx --now e15d4a8a838d
Machine init complete
Starting machine "e15d4a8a838d"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful e15d4a8a838d
API forwarding listening on: npipe:////./pipe/docker_engine
Docker API clients default to this address. You do not need to set DOCKER_HOST.
Machine "e15d4a8a838d" started successfully
C>
podman.exe machine rm e15d4a8a838d
Error: running vm "e15d4a8a838d" cannot be destroyed
C>
podman.exe machine rm --force e15d4a8a838d
C>
podman.exe machine inspect e15d4a8a838d
[]
Error: e15d4a8a838d: VM does not exist
← Exit [It] Remove running machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/rm_test.go:48 @ 07/18/24 16:53:47.234 (45.769s)
podman machine rm
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/rm_test.go:14
machine rm --save-ignition --save-image
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/rm_test.go:73
→ Enter [
It] machine rm --save-ignition --save-image - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/rm_test.go:73 @ 07/18/24 16:53:47.382
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx a7f347ba0968
Machine init complete
To start your machine run:
podman machine start a7f347ba0968
C>
podman.exe machine inspect --format {{.SSHConfig.IdentityPath}} a7f347ba0968
C:\Users\ADMINI~1\AppData\Local\Temp\podman_test2928088890\.local\share\containers\podman\machine\machine
C>
podman.exe machine rm --force --save-ignition --save-image a7f347ba0968
C>
podman.exe machine inspect a7f347ba0968
Error: a7f347ba0968: VM does not exist
[]
← Exit [It] machine rm --save-ignition --save-image - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/rm_test.go:73 @ 07/18/24 16:54:08.392 (21.01s)
podman machine rm
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/rm_test.go:14
Remove machine sharing ssh key with another machine
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/rm_test.go:112
→ Enter [
It] Remove machine sharing ssh key with another machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/rm_test.go:112 @ 07/18/24 16:54:08.538
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx foo
Machine init complete
To start your machine run:
podman machine start foo
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx --now bar
Machine init complete
Starting machine "bar"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful bar
API forwarding listening on: npipe:////./pipe/docker_engine
Docker API clients default to this address. You do not need to set DOCKER_HOST.
Machine "bar" started successfully
C>
podman.exe machine inspect --format {{.SSHConfig.IdentityPath}} foo
C:\Users\ADMINI~1\AppData\Local\Temp\podman_test1062158814\.local\share\containers\podman\machine\machine
C>
podman.exe machine inspect --format {{.SSHConfig.IdentityPath}} bar
C:\Users\ADMINI~1\AppData\Local\Temp\podman_test1062158814\.local\share\containers\podman\machine\machine
C>
podman.exe machine rm --force foo
C>
podman.exe machine ssh bar echo foo
foo
← Exit [It] Remove machine sharing ssh key with another machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/rm_test.go:112 @ 07/18/24 16:55:13.363 (1m4.825s)
podman machine rm
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/rm_test.go:14
Removing all machines doesn't delete ssh keys
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/rm_test.go:154
→ Enter [
It] Removing all machines doesn't delete ssh keys - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/rm_test.go:154 @ 07/18/24 16:55:16.29
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx foo
Machine init complete
To start your machine run:
podman machine start foo
C>
podman.exe machine inspect --format {{.SSHConfig.IdentityPath}} foo
C:\Users\ADMINI~1\AppData\Local\Temp\podman_test1179095270\.local\share\containers\podman\machine\machine
C>
podman.exe machine rm --force foo
← Exit [It] Removing all machines doesn't delete ssh keys - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/rm_test.go:154 @ 07/18/24 16:55:37.732 (21.442s)
podman inspect stop
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/inspect_test.go:13
inspect bad name
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/inspect_test.go:15
→ Enter [
It] inspect bad name - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/inspect_test.go:15 @ 07/18/24 16:55:37.854
C>
podman.exe machine inspect abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
[]
Error: abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ: VM does not exist
← Exit [It] inspect bad name - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/inspect_test.go:15 @ 07/18/24 16:55:37.976 (123ms)
podman inspect stop
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/inspect_test.go:13
inspect two machines
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/inspect_test.go:23
→ Enter [
It] inspect two machines - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/inspect_test.go:23 @ 07/18/24 16:55:37.981
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx foo1
Machine init complete
To start your machine run:
podman machine start foo1
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx foo2
Machine init complete
To start your machine run:
podman machine start foo2
C>
podman.exe machine inspect --format {{.Name}} foo1
foo1
← Exit [It] inspect two machines - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/inspect_test.go:23 @ 07/18/24 16:56:16.604 (38.623s)
podman inspect stop
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/inspect_test.go:13
inspect with go format
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/inspect_test.go:42
→ Enter [
It] inspect with go format - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/inspect_test.go:42 @ 07/18/24 16:56:19.317
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 3eefbcb42a68
Machine init complete
To start your machine run:
podman machine start 3eefbcb42a68
C>
podman.exe machine inspect 3eefbcb42a68
[
{
"ConfigDir": {
"Path": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test3029989587\\.config\\containers\\podman\\machine\\hyperv"
},
"ConnectionInfo": {
"PodmanSocket": null,
"PodmanPipe": {
"Path": "\\\\.\\pipe\\podman-3eefbcb42a68"
}
},
"Created": "2024-07-18T16:56:19.4741909Z",
"LastUp": "0001-01-01T00:00:00Z",
"Name": "3eefbcb42a68",
"Resources": {
"CPUs": 24,
"DiskSize": 11,
"Memory": 2048,
"USBs": []
},
"SSHConfig": {
"IdentityPath": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test3029989587\\.local\\share\\containers\\podman\\machine\\machine",
"Port": 50507,
"RemoteUsername": "core"
},
"State": "stopped",
"UserModeNetworking": true,
"Rootful": false,
"Rosetta": false
}
]
C>
podman.exe machine inspect --format {{.Name}} 3eefbcb42a68
3eefbcb42a68
C>
podman.exe machine inspect --format {{.Abcde}} 3eefbcb42a68
Error: template: inspect:1:13: executing "inspect" at <.Abcde>: can't evaluate field Abcde in type machine.InspectInfo
← Exit [It] inspect with go format - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/inspect_test.go:42 @ 07/18/24 16:56:40.65 (21.333s)
podman inspect stop
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/inspect_test.go:13
inspect shows a unique socket name per machine
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/inspect_test.go:82
→ Enter [
It] inspect shows a unique socket name per machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/inspect_test.go:82 @ 07/18/24 16:56:42.019
[SKIPPED] test is only relevant for Unix based machines
In [It] at: C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_test.go:254 @ 07/18/24 16:56:42.019
Full Stack Trace
github.com/containers/podman/v5/pkg/machine/e2e_test.skipIfVmtype(0x3, {0x7ff74f331461, 0x2d})
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_test.go:254 +0x5b
github.com/containers/podman/v5/pkg/machine/e2e_test.init.func7.4()
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/inspect_test.go:84 +0x46
← Exit [It] inspect shows a unique socket name per machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/inspect_test.go:82 @ 07/18/24 16:56:42.019 (0s)
podman machine list
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/list_test.go:16
list machine
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/list_test.go:18
→ Enter [
It] list machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/list_test.go:18 @ 07/18/24 16:56:42.019
C>
podman.exe machine list
NAME VM TYPE CREATED LAST UP CPUS MEMORY DISK SIZE
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 43aa9b88163f
Machine init complete
To start your machine run:
podman machine start 43aa9b88163f
C>
podman.exe machine list
NAME VM TYPE CREATED LAST UP CPUS MEMORY DISK SIZE
43aa9b88163f* hyperv 19 seconds ago Never 24 2GiB 11GiB
← Exit [It] list machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/list_test.go:18 @ 07/18/24 16:57:01.905 (19.886s)
podman machine list
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/list_test.go:16
list machines with quiet or noheading
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/list_test.go:36
→ Enter [
It] list machines with quiet or noheading - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/list_test.go:36 @ 07/18/24 16:57:03.276
C>
podman.exe machine list --quiet
C>
podman.exe machine list --noheading --quiet
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 9d719618a548
Machine init complete
To start your machine run:
podman machine start 9d719618a548
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 267fff78b2b0
Machine init complete
To start your machine run:
podman machine start 267fff78b2b0
C>
podman.exe machine list --noheading --quiet
267fff78b2b0
9d719618a548*
← Exit [It] list machines with quiet or noheading - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/list_test.go:36 @ 07/18/24 16:57:44.362 (41.086s)
podman machine list
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/list_test.go:16
list machine: check if running while starting
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/list_test.go:72
→ Enter [
It] list machine: check if running while starting - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/list_test.go:72 @ 07/18/24 16:57:47.244
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx e1d2da9a778c
Machine init complete
To start your machine run:
podman machine start e1d2da9a778c
C>
podman.exe machine list --format {{.LastUp}}
Never
C>
podman.exe machine start e1d2da9a778c
C>
podman.exe machine list --format {{.LastUp}}
Starting machine "e1d2da9a778c"
Never
C>
podman.exe machine list --format {{.LastUp}}
Currently starting
C>
podman.exe machine list --format {{.LastUp}}
Currently starting
C>
podman.exe machine list --format {{.LastUp}}
Currently starting
C>
podman.exe machine list --format {{.LastUp}}
Currently starting
C>
podman.exe machine list --format {{.LastUp}}
Currently starting
C>
podman.exe machine list --format {{.LastUp}}
Currently starting
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful e1d2da9a778c
C>
podman.exe machine list --format {{.LastUp}}
Currently starting
API forwarding listening on: npipe:////./pipe/docker_engine
Docker API clients default to this address. You do not need to set DOCKER_HOST.
Machine "e1d2da9a778c" started successfully
C>
podman.exe machine list --format {{.LastUp}}
Currently running
C>
podman.exe machine list --format {{.LastUp}}
Currently running
← Exit [It] list machine: check if running while starting - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/list_test.go:72 @ 07/18/24 16:58:33.999 (46.755s)
podman machine list
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/list_test.go:16
list with --format
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/list_test.go:111
→ Enter [
It] list with --format - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/list_test.go:111 @ 07/18/24 16:58:36.845
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 27e6369281ec
Machine init complete
To start your machine run:
podman machine start 27e6369281ec
C>
podman.exe machine list --format {{.Name}}
27e6369281ec*
C>
podman.exe machine list --format json
[
{
"Name": "27e6369281ec",
"Default": true,
"Created": "2024-07-18T16:58:37.0065828Z",
"Running": false,
"Starting": false,
"LastUp": "0001-01-01T00:00:00Z",
"Stream": "default",
"VMType": "hyperv",
"CPUs": 24,
"Memory": "2147483648",
"DiskSize": "11811160064",
"Port": 50546,
"RemoteUsername": "core",
"IdentityPath": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test911910220\\.local\\share\\containers\\podman\\machine\\machine",
"UserModeNetworking": true
}
]C:\Users\Administrator\AppData\Local\cirrus-ci-build\repo\bin\windows\podman.exe machine list --format table {{.Name}}
NAME
27e6369281ec*
← Exit [It] list with --format - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/list_test.go:111 @ 07/18/24 16:58:56.843 (19.998s)
podman machine list
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/list_test.go:16
list machine in machine-readable byte format
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/list_test.go:151
→ Enter [
It] list machine in machine-readable byte format - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/list_test.go:151 @ 07/18/24 16:58:58.22
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx ac254a9f30ae
Machine init complete
To start your machine run:
podman machine start ac254a9f30ae
C>
podman.exe machine list --format json
[
{
"Name": "ac254a9f30ae",
"Default": true,
"Created": "2024-07-18T16:58:58.37766Z",
"Running": false,
"Starting": false,
"LastUp": "0001-01-01T00:00:00Z",
"Stream": "default",
"VMType": "hyperv",
"CPUs": 24,
"Memory": "2147483648",
"DiskSize": "11811160064",
"Port": 50552,
"RemoteUsername": "core",
"IdentityPath": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test2755855054\\.local\\share\\containers\\podman\\machine\\machine",
"UserModeNetworking": true
}
] < Exit [It] list machine in machine-readable byte format - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/list_test.go:151 @ 07/18/24 16:59:18.466 (20.246s)
> Enter [DeferCleanup (Each)] podman machine list - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/18/24 16:59:18.466
C>
podman.exe machine rm --force ac254a9f30ae
< Exit [DeferCleanup (Each)] podman machine list - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/18/24 16:59:19.832 (1.365s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/18/24 16:59:19.832
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/18/24 16:59:19.832 (0s)
+ [21.612 seconds]
podman machine list
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/list_test.go:16
list machine in human-readable format
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/list_test.go:173
→ Enter [
It] list machine in human-readable format - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/list_test.go:173 @ 07/18/24 16:59:19.832
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 2a4568087cc4
Machine init complete
To start your machine run:
podman machine start 2a4568087cc4
C>
podman.exe machine list --format {{.Memory}} {{.DiskSize}}
2GiB 11GiB
← Exit [It] list machine in human-readable format - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/list_test.go:173 @ 07/18/24 16:59:40.202 (20.37s)
podman machine info
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/info_test.go:13
machine info
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/info_test.go:15
→ Enter [
It] machine info - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/info_test.go:15 @ 07/18/24 16:59:41.567
C>
podman.exe machine info
host:
arch: amd64
currentmachine: ""
defaultmachine: ""
eventsdir: C:\Users\ADMINI~1\AppData\Local\Temp\podman_test1694446128\.local\share\containers\podman\podman
machineconfigdir: C:\Users\ADMINI~1\AppData\Local\Temp\podman_test1694446128\.config\containers\podman\machine\hyperv
machineimagedir: C:\Users\ADMINI~1\AppData\Local\Temp\podman_test1694446128\.local\share\containers\podman\machine\hyperv
machinestate: ""
numberofmachines: 0
os: windows
vmtype: hyperv
version:
apiversion: 5.2.0-dev
version: 5.2.0-dev
goversion: go1.22.4
gitcommit: 768882e3565755e36061ec50f778dc4231e89e61
builttime: Thu Jul 18 16:23:14 2024
built: 1721319794
osarch: windows/amd64
os: windows
C>
podman.exe machine info --format {{.Host.NumberOfMachines}}
0
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 16d115086414
Machine init complete
To start your machine run:
podman machine start 16d115086414
C>
podman.exe machine info --format {{.Host.NumberOfMachines}}
1
C>
podman.exe machine info --format json
{
"Host": {
"Arch": "amd64",
"CurrentMachine": "16d115086414",
"DefaultMachine": "16d115086414",
"EventsDir": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test1694446128\\.local\\share\\containers\\podman\\podman",
"MachineConfigDir": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test1694446128\\.config\\containers\\podman\\machine\\hyperv",
"MachineImageDir": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test1694446128\\.local\\share\\containers\\podman\\machine\\hyperv",
"MachineState": "Stopped",
"NumberOfMachines": 1,
"OS": "windows",
"VMType": "hyperv"
},
"Version": {
"APIVersion": "5.2.0-dev",
"Version": "5.2.0-dev",
"GoVersion": "go1.22.4",
"GitCommit": "768882e3565755e36061ec50f778dc4231e89e61",
"BuiltTime": "Thu Jul 18 16:23:14 2024",
"Built": 1721319794,
"OsArch": "windows/amd64",
"Os": "windows"
}
}
← Exit [It] machine info - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/info_test.go:15 @ 07/18/24 17:00:02.032 (20.465s)
[SynchronizedAfterSuite]
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/machine_test.go:96
→ Enter [
SynchronizedAfterSuite] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:96 @ 07/18/24 17:00:03.409
podman machine init machine init with volume 0.000000 seconds
podman machine set wsl cannot change disk, memory, processor 0.000000 seconds
podman machine set set user mode networking 0.000000 seconds
podman machine init machine init with rosetta=false 0.000000 seconds
podman machine init machine init with rosetta=true 0.000000 seconds
podman machine init - windows only init with user mode networking 0.000000 seconds
run basic podman commands Volume ops 0.000000 seconds
podman inspect stop inspect shows a unique socket name per machine 0.000000 seconds
run basic podman commands Volume should be virtiofs 0.000000 seconds
podman machine init - windows only init should not overwrite existing WSL vms 0.000543 seconds
podman inspect stop inspect bad name 0.123851 seconds
podman machine stop stop bad name 0.132787 seconds
podman machine start bad start name 0.134087 seconds
podman machine ssh bad machine name 0.135547 seconds
podman machine rm bad init name 0.136438 seconds
podman machine reset starting from scratch should not error 0.138277 seconds
podman machine init bad init 1.107482 seconds
podman machine init - windows only init should not should not overwrite existing HyperV vms 1.410420 seconds
podman machine init simple init with username 19.804692 seconds
podman machine list list machine 19.885815 seconds
podman machine init simple init 19.930549 seconds
podman machine list list with --format 19.997885 seconds
podman machine list list machine in machine-readable byte format 20.246272 seconds
podman machine list list machine in human-readable format 20.370236 seconds
podman machine info machine info 20.471537 seconds
podman machine ssh ssh to non-running machine 20.653802 seconds
podman machine rm machine rm --save-ignition --save-image 21.011011 seconds
podman inspect stop inspect with go format 21.333395 seconds
podman machine rm Removing all machines doesn't delete ssh keys 21.443422 seconds
podman machine init verify a podman 4 config does not break podman 5 21.534211 seconds
podman machine rm Remove machine 22.991309 seconds
podman machine reset reset machine with one defined machine 23.503108 seconds
podman machine init init should cleanup on failure 24.405745 seconds
podman inspect stop inspect two machines 38.623275 seconds
podman machine list list machines with quiet or noheading 41.085868 seconds
podman machine start start machine with conflict on SSH port 43.463601 seconds
podman machine start start machine already started 43.727470 seconds
podman machine set set rootful with docker sock change 45.261003 seconds
podman machine set set while machine already running 45.626919 seconds
podman machine rm Remove running machine 45.769534 seconds
podman machine init simple init with start 45.786006 seconds
podman machine stop Stop running machine 45.904422 seconds
podman machine ssh ssh to running machine and check os-type 45.987886 seconds
run basic podman commands Basic ops 46.381547 seconds
podman machine list list machine: check if running while starting 46.754878 seconds
run basic podman commands Podman ops with port forwarding and gvproxy 47.022505 seconds
run basic podman commands podman volume on non-standard path 47.575968 seconds
podman machine init machine init rootful with docker.sock check 47.807490 seconds
podman machine set no settings should change if no flags 48.731847 seconds
podman machine init machine init rootless docker.sock check 49.732604 seconds
podman machine start start two machines in parallel 61.148311 seconds
podman machine start start only starts specified machine 63.566809 seconds
podman machine set set machine cpus, disk, memory 64.717115 seconds
podman machine rm Remove machine sharing ssh key with another machine 64.825752 seconds
podman machine reset reset with running machine and other machines idle 71.610007 seconds
podman machine start start simple machine 78.994598 seconds
podman machine proxy settings propagation ssh to running machine and check proxy settings 88.258381 seconds
podman machine init machine init with cpus, disk size, memory, timezone 121.640201 seconds
← Exit [SynchronizedAfterSuite] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:96 @ 07/18/24 17:00:03.409 (0s)
Summarizing 1 Failure:
[FAIL] podman machine init [It] machine init with cpus, disk size, memory, timezone
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo/pkg/machine/e2e/init_test.go:170
Ran 48 of 58 Specs in 1816.147 seconds
FAIL! -- 47 Passed | 1 Failed | 0 Pending | 10 Skipped
--- FAIL: TestMachine (1816.15s)
FAIL
Ginkgo ran 1 suite in 31m28.2316648s
Test Suite Failed
Processed Thu Jul 18 17:00:03 2024 by C:\Users\Administrator\AppData\Local\cirrus-ci-build\repo\contrib\cirrus\logformatter v0.3