diff -U3 /tmp/cirrus-ci-build/src/test/regress/expected/plpgsql.out /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/plpgsql.out
--- /tmp/cirrus-ci-build/src/test/regress/expected/plpgsql.out	2024-09-20 04:07:19.054812578 +0000
+++ /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/plpgsql.out	2024-09-20 04:17:08.985564893 +0000
@@ -3979,1876 +3979,10 @@
 end;
 $$ language plpgsql;
 select raise_test();
-ERROR:  1234F
-CONTEXT:  PL/pgSQL function raise_test() line 3 at RAISE
-create or replace function raise_test() returns void as $$
-begin
-  raise division_by_zero using message = 'custom' || ' message';
-end;
-$$ language plpgsql;
-select raise_test();
-ERROR:  custom message
-CONTEXT:  PL/pgSQL function raise_test() line 3 at RAISE
-create or replace function raise_test() returns void as $$
-begin
-  raise using message = 'custom' || ' message', errcode = '22012';
-end;
-$$ language plpgsql;
-select raise_test();
-ERROR:  custom message
-CONTEXT:  PL/pgSQL function raise_test() line 3 at RAISE
--- conflict on message
-create or replace function raise_test() returns void as $$
-begin
-  raise notice 'some message' using message = 'custom' || ' message', errcode = '22012';
-end;
-$$ language plpgsql;
-select raise_test();
-ERROR:  RAISE option already specified: MESSAGE
-CONTEXT:  PL/pgSQL function raise_test() line 3 at RAISE
--- conflict on errcode
-create or replace function raise_test() returns void as $$
-begin
-  raise division_by_zero using message = 'custom' || ' message', errcode = '22012';
-end;
-$$ language plpgsql;
-select raise_test();
-ERROR:  RAISE option already specified: ERRCODE
-CONTEXT:  PL/pgSQL function raise_test() line 3 at RAISE
--- nothing to re-RAISE
-create or replace function raise_test() returns void as $$
-begin
-  raise;
-end;
-$$ language plpgsql;
-select raise_test();
-ERROR:  RAISE without parameters cannot be used outside an exception handler
-CONTEXT:  PL/pgSQL function raise_test() line 3 at RAISE
--- test access to exception data
-create function zero_divide() returns int as $$
-declare v int := 0;
-begin
-  return 10 / v;
-end;
-$$ language plpgsql parallel safe;
-create or replace function raise_test() returns void as $$
-begin
-  raise exception 'custom exception'
-     using detail = 'some detail of custom exception',
-           hint = 'some hint related to custom exception';
-end;
-$$ language plpgsql;
-create function stacked_diagnostics_test() returns void as $$
-declare _sqlstate text;
-        _message text;
-        _context text;
-begin
-  perform zero_divide();
-exception when others then
-  get stacked diagnostics
-        _sqlstate = returned_sqlstate,
-        _message = message_text,
-        _context = pg_exception_context;
-  raise notice 'sqlstate: %, message: %, context: [%]',
-    _sqlstate, _message, replace(_context, E'\n', ' <- ');
-end;
-$$ language plpgsql;
-select stacked_diagnostics_test();
-NOTICE:  sqlstate: 22012, message: division by zero, context: [PL/pgSQL function zero_divide() line 4 at RETURN <- SQL statement "SELECT zero_divide()" <- PL/pgSQL function stacked_diagnostics_test() line 6 at PERFORM]
- stacked_diagnostics_test 
---------------------------
- 
-(1 row)
-
-create or replace function stacked_diagnostics_test() returns void as $$
-declare _detail text;
-        _hint text;
-        _message text;
-begin
-  perform raise_test();
-exception when others then
-  get stacked diagnostics
-        _message = message_text,
-        _detail = pg_exception_detail,
-        _hint = pg_exception_hint;
-  raise notice 'message: %, detail: %, hint: %', _message, _detail, _hint;
-end;
-$$ language plpgsql;
-select stacked_diagnostics_test();
-NOTICE:  message: custom exception, detail: some detail of custom exception, hint: some hint related to custom exception
- stacked_diagnostics_test 
---------------------------
- 
-(1 row)
-
--- fail, cannot use stacked diagnostics statement outside handler
-create or replace function stacked_diagnostics_test() returns void as $$
-declare _detail text;
-        _hint text;
-        _message text;
-begin
-  get stacked diagnostics
-        _message = message_text,
-        _detail = pg_exception_detail,
-        _hint = pg_exception_hint;
-  raise notice 'message: %, detail: %, hint: %', _message, _detail, _hint;
-end;
-$$ language plpgsql;
-select stacked_diagnostics_test();
-ERROR:  GET STACKED DIAGNOSTICS cannot be used outside an exception handler
-CONTEXT:  PL/pgSQL function stacked_diagnostics_test() line 6 at GET STACKED DIAGNOSTICS
-drop function stacked_diagnostics_test();
--- Test that an error recovery subtransaction is parallel safe
-create function error_trap_test() returns text as $$
-begin
-  perform zero_divide();
-  return 'no error detected!';
-exception when division_by_zero then
-  return 'division_by_zero detected';
-end;
-$$ language plpgsql parallel safe;
-set debug_parallel_query to on;
-explain (verbose, costs off) select error_trap_test();
-            QUERY PLAN             
------------------------------------
- Gather
-   Output: (error_trap_test())
-   Workers Planned: 1
-   Single Copy: true
-   ->  Result
-         Output: error_trap_test()
-(6 rows)
-
-select error_trap_test();
-      error_trap_test      
----------------------------
- division_by_zero detected
-(1 row)
-
-reset debug_parallel_query;
-drop function error_trap_test();
-drop function zero_divide();
--- check cases where implicit SQLSTATE variable could be confused with
--- SQLSTATE as a keyword, cf bug #5524
-create or replace function raise_test() returns void as $$
-begin
-  perform 1/0;
-exception
-  when sqlstate '22012' then
-    raise notice using message = sqlstate;
-    raise sqlstate '22012' using message = 'substitute message';
-end;
-$$ language plpgsql;
-select raise_test();
-NOTICE:  22012
-ERROR:  substitute message
-CONTEXT:  PL/pgSQL function raise_test() line 7 at RAISE
-drop function raise_test();
--- test passing column_name, constraint_name, datatype_name, table_name
--- and schema_name error fields
-create or replace function stacked_diagnostics_test() returns void as $$
-declare _column_name text;
-        _constraint_name text;
-        _datatype_name text;
-        _table_name text;
-        _schema_name text;
-begin
-  raise exception using
-    column = '>>some column name<<',
-    constraint = '>>some constraint name<<',
-    datatype = '>>some datatype name<<',
-    table = '>>some table name<<',
-    schema = '>>some schema name<<';
-exception when others then
-  get stacked diagnostics
-        _column_name = column_name,
-        _constraint_name = constraint_name,
-        _datatype_name = pg_datatype_name,
-        _table_name = table_name,
-        _schema_name = schema_name;
-  raise notice 'column %, constraint %, type %, table %, schema %',
-    _column_name, _constraint_name, _datatype_name, _table_name, _schema_name;
-end;
-$$ language plpgsql;
-select stacked_diagnostics_test();
-NOTICE:  column >>some column name<<, constraint >>some constraint name<<, type >>some datatype name<<, table >>some table name<<, schema >>some schema name<<
- stacked_diagnostics_test 
---------------------------
- 
-(1 row)
-
-drop function stacked_diagnostics_test();
--- test variadic functions
-create or replace function vari(variadic int[])
-returns void as $$
-begin
-  for i in array_lower($1,1)..array_upper($1,1) loop
-    raise notice '%', $1[i];
-  end loop; end;
-$$ language plpgsql;
-select vari(1,2,3,4,5);
-NOTICE:  1
-NOTICE:  2
-NOTICE:  3
-NOTICE:  4
-NOTICE:  5
- vari 
-------
- 
-(1 row)
-
-select vari(3,4,5);
-NOTICE:  3
-NOTICE:  4
-NOTICE:  5
- vari 
-------
- 
-(1 row)
-
-select vari(variadic array[5,6,7]);
-NOTICE:  5
-NOTICE:  6
-NOTICE:  7
- vari 
-------
- 
-(1 row)
-
-drop function vari(int[]);
--- coercion test
-create or replace function pleast(variadic numeric[])
-returns numeric as $$
-declare aux numeric = $1[array_lower($1,1)];
-begin
-  for i in array_lower($1,1)+1..array_upper($1,1) loop
-    if $1[i] < aux then aux := $1[i]; end if;
-  end loop;
-  return aux;
-end;
-$$ language plpgsql immutable strict;
-select pleast(10,1,2,3,-16);
- pleast 
---------
-    -16
-(1 row)
-
-select pleast(10.2,2.2,-1.1);
- pleast 
---------
-   -1.1
-(1 row)
-
-select pleast(10.2,10, -20);
- pleast 
---------
-    -20
-(1 row)
-
-select pleast(10,20, -1.0);
- pleast 
---------
-   -1.0
-(1 row)
-
--- in case of conflict, non-variadic version is preferred
-create or replace function pleast(numeric)
-returns numeric as $$
-begin
-  raise notice 'non-variadic function called';
-  return $1;
-end;
-$$ language plpgsql immutable strict;
-select pleast(10);
-NOTICE:  non-variadic function called
- pleast 
---------
-     10
-(1 row)
-
-drop function pleast(numeric[]);
-drop function pleast(numeric);
--- test table functions
-create function tftest(int) returns table(a int, b int) as $$
-begin
-  return query select $1, $1+i from generate_series(1,5) g(i);
-end;
-$$ language plpgsql immutable strict;
-select * from tftest(10);
- a  | b  
-----+----
- 10 | 11
- 10 | 12
- 10 | 13
- 10 | 14
- 10 | 15
-(5 rows)
-
-create or replace function tftest(a1 int) returns table(a int, b int) as $$
-begin
-  a := a1; b := a1 + 1;
-  return next;
-  a := a1 * 10; b := a1 * 10 + 1;
-  return next;
-end;
-$$ language plpgsql immutable strict;
-select * from tftest(10);
-  a  |  b  
------+-----
-  10 |  11
- 100 | 101
-(2 rows)
-
-drop function tftest(int);
-create function rttest()
-returns setof int as $$
-declare rc int;
-begin
-  return query values(10),(20);
-  get diagnostics rc = row_count;
-  raise notice '% %', found, rc;
-  return query select * from (values(10),(20)) f(a) where false;
-  get diagnostics rc = row_count;
-  raise notice '% %', found, rc;
-  return query execute 'values(10),(20)';
-  get diagnostics rc = row_count;
-  raise notice '% %', found, rc;
-  return query execute 'select * from (values(10),(20)) f(a) where false';
-  get diagnostics rc = row_count;
-  raise notice '% %', found, rc;
-end;
-$$ language plpgsql;
-select * from rttest();
-NOTICE:  t 2
-NOTICE:  f 0
-NOTICE:  t 2
-NOTICE:  f 0
- rttest 
---------
-     10
-     20
-     10
-     20
-(4 rows)
-
--- check some error cases, too
-create or replace function rttest()
-returns setof int as $$
-begin
-  return query select 10 into no_such_table;
-end;
-$$ language plpgsql;
-select * from rttest();
-ERROR:  SELECT INTO query does not return tuples
-CONTEXT:  SQL statement "select 10 into no_such_table"
-PL/pgSQL function rttest() line 3 at RETURN QUERY
-create or replace function rttest()
-returns setof int as $$
-begin
-  return query execute 'select 10 into no_such_table';
-end;
-$$ language plpgsql;
-select * from rttest();
-ERROR:  SELECT INTO query does not return tuples
-CONTEXT:  SQL statement "select 10 into no_such_table"
-PL/pgSQL function rttest() line 3 at RETURN QUERY
-select * from no_such_table;
-ERROR:  relation "no_such_table" does not exist
-LINE 1: select * from no_such_table;
-                      ^
-drop function rttest();
--- Test for proper cleanup at subtransaction exit.  This example
--- exposed a bug in PG 8.2.
-CREATE FUNCTION leaker_1(fail BOOL) RETURNS INTEGER AS $$
-DECLARE
-  v_var INTEGER;
-BEGIN
-  BEGIN
-    v_var := (leaker_2(fail)).error_code;
-  EXCEPTION
-    WHEN others THEN RETURN 0;
-  END;
-  RETURN 1;
-END;
-$$ LANGUAGE plpgsql;
-CREATE FUNCTION leaker_2(fail BOOL, OUT error_code INTEGER, OUT new_id INTEGER)
-  RETURNS RECORD AS $$
-BEGIN
-  IF fail THEN
-    RAISE EXCEPTION 'fail ...';
-  END IF;
-  error_code := 1;
-  new_id := 1;
-  RETURN;
-END;
-$$ LANGUAGE plpgsql;
-SELECT * FROM leaker_1(false);
- leaker_1 
-----------
-        1
-(1 row)
-
-SELECT * FROM leaker_1(true);
- leaker_1 
-----------
-        0
-(1 row)
-
-DROP FUNCTION leaker_1(bool);
-DROP FUNCTION leaker_2(bool);
--- Test for appropriate cleanup of non-simple expression evaluations
--- (bug in all versions prior to August 2010)
-CREATE FUNCTION nonsimple_expr_test() RETURNS text[] AS $$
-DECLARE
-  arr text[];
-  lr text;
-  i integer;
-BEGIN
-  arr := array[array['foo','bar'], array['baz', 'quux']];
-  lr := 'fool';
-  i := 1;
-  -- use sub-SELECTs to make expressions non-simple
-  arr[(SELECT i)][(SELECT i+1)] := (SELECT lr);
-  RETURN arr;
-END;
-$$ LANGUAGE plpgsql;
-SELECT nonsimple_expr_test();
-   nonsimple_expr_test   
--------------------------
- {{foo,fool},{baz,quux}}
-(1 row)
-
-DROP FUNCTION nonsimple_expr_test();
-CREATE FUNCTION nonsimple_expr_test() RETURNS integer AS $$
-declare
-   i integer NOT NULL := 0;
-begin
-  begin
-    i := (SELECT NULL::integer);  -- should throw error
-  exception
-    WHEN OTHERS THEN
-      i := (SELECT 1::integer);
-  end;
-  return i;
-end;
-$$ LANGUAGE plpgsql;
-SELECT nonsimple_expr_test();
- nonsimple_expr_test 
----------------------
-                   1
-(1 row)
-
-DROP FUNCTION nonsimple_expr_test();
---
--- Test cases involving recursion and error recovery in simple expressions
--- (bugs in all versions before October 2010).  The problems are most
--- easily exposed by mutual recursion between plpgsql and sql functions.
---
-create function recurse(float8) returns float8 as
-$$
-begin
-  if ($1 > 0) then
-    return sql_recurse($1 - 1);
-  else
-    return $1;
-  end if;
-end;
-$$ language plpgsql;
--- "limit" is to prevent this from being inlined
-create function sql_recurse(float8) returns float8 as
-$$ select recurse($1) limit 1; $$ language sql;
-select recurse(10);
- recurse 
----------
-       0
-(1 row)
-
-create function error1(text) returns text language sql as
-$$ SELECT relname::text FROM pg_class c WHERE c.oid = $1::regclass $$;
-create function error2(p_name_table text) returns text language plpgsql as $$
-begin
-  return error1(p_name_table);
-end$$;
-BEGIN;
-create table public.stuffs (stuff text);
-SAVEPOINT a;
-select error2('nonexistent.stuffs');
-ERROR:  schema "nonexistent" does not exist
-CONTEXT:  SQL function "error1" statement 1
-PL/pgSQL function error2(text) line 3 at RETURN
-ROLLBACK TO a;
-select error2('public.stuffs');
- error2 
---------
- stuffs
-(1 row)
-
-rollback;
-drop function error2(p_name_table text);
-drop function error1(text);
--- Test for proper handling of cast-expression caching
-create function sql_to_date(integer) returns date as $$
-select $1::text::date
-$$ language sql immutable strict;
-create cast (integer as date) with function sql_to_date(integer) as assignment;
-create function cast_invoker(integer) returns date as $$
-begin
-  return $1;
-end$$ language plpgsql;
-select cast_invoker(20150717);
- cast_invoker 
---------------
- 07-17-2015
-(1 row)
-
-select cast_invoker(20150718);  -- second call crashed in pre-release 9.5
- cast_invoker 
---------------
- 07-18-2015
-(1 row)
-
-begin;
-select cast_invoker(20150717);
- cast_invoker 
---------------
- 07-17-2015
-(1 row)
-
-select cast_invoker(20150718);
- cast_invoker 
---------------
- 07-18-2015
-(1 row)
-
-savepoint s1;
-select cast_invoker(20150718);
- cast_invoker 
---------------
- 07-18-2015
-(1 row)
-
-select cast_invoker(-1); -- fails
-ERROR:  invalid input syntax for type date: "-1"
-CONTEXT:  SQL function "sql_to_date" statement 1
-PL/pgSQL function cast_invoker(integer) while casting return value to function's return type
-rollback to savepoint s1;
-select cast_invoker(20150719);
- cast_invoker 
---------------
- 07-19-2015
-(1 row)
-
-select cast_invoker(20150720);
- cast_invoker 
---------------
- 07-20-2015
-(1 row)
-
-commit;
-drop function cast_invoker(integer);
-drop function sql_to_date(integer) cascade;
-NOTICE:  drop cascades to cast from integer to date
--- Test handling of cast cache inside DO blocks
--- (to check the original crash case, this must be a cast not previously
--- used in this session)
-begin;
-do $$ declare x text[]; begin x := '{1.23, 4.56}'::numeric[]; end $$;
-do $$ declare x text[]; begin x := '{1.23, 4.56}'::numeric[]; end $$;
-end;
--- Test for consistent reporting of error context
-create function fail() returns int language plpgsql as $$
-begin
-  return 1/0;
-end
-$$;
-select fail();
-ERROR:  division by zero
-CONTEXT:  PL/pgSQL expression "1/0"
-PL/pgSQL function fail() line 3 at RETURN
-select fail();
-ERROR:  division by zero
-CONTEXT:  PL/pgSQL expression "1/0"
-PL/pgSQL function fail() line 3 at RETURN
-drop function fail();
--- Test handling of string literals.
-set standard_conforming_strings = off;
-create or replace function strtest() returns text as $$
-begin
-  raise notice 'foo\\bar\041baz';
-  return 'foo\\bar\041baz';
-end
-$$ language plpgsql;
-WARNING:  nonstandard use of \\ in a string literal
-LINE 3:   raise notice 'foo\\bar\041baz';
-                       ^
-HINT:  Use the escape string syntax for backslashes, e.g., E'\\'.
-WARNING:  nonstandard use of \\ in a string literal
-LINE 4:   return 'foo\\bar\041baz';
-                 ^
-HINT:  Use the escape string syntax for backslashes, e.g., E'\\'.
-WARNING:  nonstandard use of \\ in a string literal
-LINE 4:   return 'foo\\bar\041baz';
-                 ^
-HINT:  Use the escape string syntax for backslashes, e.g., E'\\'.
-select strtest();
-NOTICE:  foo\bar!baz
-WARNING:  nonstandard use of \\ in a string literal
-LINE 1: 'foo\\bar\041baz'
-        ^
-HINT:  Use the escape string syntax for backslashes, e.g., E'\\'.
-QUERY:  'foo\\bar\041baz'
-   strtest   
--------------
- foo\bar!baz
-(1 row)
-
-create or replace function strtest() returns text as $$
-begin
-  raise notice E'foo\\bar\041baz';
-  return E'foo\\bar\041baz';
-end
-$$ language plpgsql;
-select strtest();
-NOTICE:  foo\bar!baz
-   strtest   
--------------
- foo\bar!baz
-(1 row)
-
-set standard_conforming_strings = on;
-create or replace function strtest() returns text as $$
-begin
-  raise notice 'foo\\bar\041baz\';
-  return 'foo\\bar\041baz\';
-end
-$$ language plpgsql;
-select strtest();
-NOTICE:  foo\\bar\041baz\
-     strtest      
-------------------
- foo\\bar\041baz\
-(1 row)
-
-create or replace function strtest() returns text as $$
-begin
-  raise notice E'foo\\bar\041baz';
-  return E'foo\\bar\041baz';
-end
-$$ language plpgsql;
-select strtest();
-NOTICE:  foo\bar!baz
-   strtest   
--------------
- foo\bar!baz
-(1 row)
-
-drop function strtest();
--- Test anonymous code blocks.
-DO $$
-DECLARE r record;
-BEGIN
-    FOR r IN SELECT rtrim(roomno) AS roomno, comment FROM Room ORDER BY roomno
-    LOOP
-        RAISE NOTICE '%, %', r.roomno, r.comment;
-    END LOOP;
-END$$;
-NOTICE:  001, Entrance
-NOTICE:  002, Office
-NOTICE:  003, Office
-NOTICE:  004, Technical
-NOTICE:  101, Office
-NOTICE:  102, Conference
-NOTICE:  103, Restroom
-NOTICE:  104, Technical
-NOTICE:  105, Office
-NOTICE:  106, Office
--- these are to check syntax error reporting
-DO LANGUAGE plpgsql $$begin return 1; end$$;
-ERROR:  RETURN cannot have a parameter in function returning void
-LINE 1: DO LANGUAGE plpgsql $$begin return 1; end$$;
-                                           ^
-DO $$
-DECLARE r record;
-BEGIN
-    FOR r IN SELECT rtrim(roomno) AS roomno, foo FROM Room ORDER BY roomno
-    LOOP
-        RAISE NOTICE '%, %', r.roomno, r.comment;
-    END LOOP;
-END$$;
-ERROR:  column or variable "foo" does not exist
-LINE 1: SELECT rtrim(roomno) AS roomno, foo FROM Room ORDER BY roomn...
-                                        ^
-QUERY:  SELECT rtrim(roomno) AS roomno, foo FROM Room ORDER BY roomno
-CONTEXT:  PL/pgSQL function inline_code_block line 4 at FOR over SELECT rows
--- Check handling of errors thrown from/into anonymous code blocks.
-do $outer$
-begin
-  for i in 1..10 loop
-   begin
-    execute $ex$
-      do $$
-      declare x int = 0;
-      begin
-        x := 1 / x;
-      end;
-      $$;
-    $ex$;
-  exception when division_by_zero then
-    raise notice 'caught division by zero';
-  end;
-  end loop;
-end;
-$outer$;
-NOTICE:  caught division by zero
-NOTICE:  caught division by zero
-NOTICE:  caught division by zero
-NOTICE:  caught division by zero
-NOTICE:  caught division by zero
-NOTICE:  caught division by zero
-NOTICE:  caught division by zero
-NOTICE:  caught division by zero
-NOTICE:  caught division by zero
-NOTICE:  caught division by zero
--- Check variable scoping -- a var is not available in its own or prior
--- default expressions, but it is available in later ones.
-do $$
-declare x int := x + 1;  -- error
-begin
-  raise notice 'x = %', x;
-end;
-$$;
-ERROR:  column or variable "x" does not exist
-LINE 1: x + 1
-        ^
-QUERY:  x + 1
-CONTEXT:  PL/pgSQL function inline_code_block line 2 during statement block local variable initialization
-do $$
-declare y int := x + 1;  -- error
-        x int := 42;
-begin
-  raise notice 'x = %, y = %', x, y;
-end;
-$$;
-ERROR:  column or variable "x" does not exist
-LINE 1: x + 1
-        ^
-QUERY:  x + 1
-CONTEXT:  PL/pgSQL function inline_code_block line 2 during statement block local variable initialization
-do $$
-declare x int := 42;
-        y int := x + 1;
-begin
-  raise notice 'x = %, y = %', x, y;
-end;
-$$;
-NOTICE:  x = 42, y = 43
-do $$
-declare x int := 42;
-begin
-  declare y int := x + 1;
-          x int := x + 2;
-          z int := x * 10;
-  begin
-    raise notice 'x = %, y = %, z = %', x, y, z;
-  end;
-end;
-$$;
-NOTICE:  x = 44, y = 43, z = 440
--- Check handling of conflicts between plpgsql vars and table columns.
-set plpgsql.variable_conflict = error;
-create function conflict_test() returns setof int8_tbl as $$
-declare r record;
-  q1 bigint := 42;
-begin
-  for r in select q1,q2 from int8_tbl loop
-    return next r;
-  end loop;
-end;
-$$ language plpgsql;
-select * from conflict_test();
-ERROR:  column reference "q1" is ambiguous
-LINE 1: select q1,q2 from int8_tbl
-               ^
-DETAIL:  It could refer to either a PL/pgSQL variable or a table column.
-QUERY:  select q1,q2 from int8_tbl
-CONTEXT:  PL/pgSQL function conflict_test() line 5 at FOR over SELECT rows
-create or replace function conflict_test() returns setof int8_tbl as $$
-#variable_conflict use_variable
-declare r record;
-  q1 bigint := 42;
-begin
-  for r in select q1,q2 from int8_tbl loop
-    return next r;
-  end loop;
-end;
-$$ language plpgsql;
-select * from conflict_test();
- q1 |        q2         
-----+-------------------
- 42 |               456
- 42 |  4567890123456789
- 42 |               123
- 42 |  4567890123456789
- 42 | -4567890123456789
-(5 rows)
-
-create or replace function conflict_test() returns setof int8_tbl as $$
-#variable_conflict use_column
-declare r record;
-  q1 bigint := 42;
-begin
-  for r in select q1,q2 from int8_tbl loop
-    return next r;
-  end loop;
-end;
-$$ language plpgsql;
-select * from conflict_test();
-        q1        |        q2         
-------------------+-------------------
-              123 |               456
-              123 |  4567890123456789
- 4567890123456789 |               123
- 4567890123456789 |  4567890123456789
- 4567890123456789 | -4567890123456789
-(5 rows)
-
-drop function conflict_test();
--- Check that an unreserved keyword can be used as a variable name
-create function unreserved_test() returns int as $$
-declare
-  forward int := 21;
-begin
-  forward := forward * 2;
-  return forward;
-end
-$$ language plpgsql;
-select unreserved_test();
- unreserved_test 
------------------
-              42
-(1 row)
-
-create or replace function unreserved_test() returns int as $$
-declare
-  return int := 42;
-begin
-  return := return + 1;
-  return return;
-end
-$$ language plpgsql;
-select unreserved_test();
- unreserved_test 
------------------
-              43
-(1 row)
-
-create or replace function unreserved_test() returns int as $$
-declare
-  comment int := 21;
-begin
-  comment := comment * 2;
-  comment on function unreserved_test() is 'this is a test';
-  return comment;
-end
-$$ language plpgsql;
-select unreserved_test();
- unreserved_test 
------------------
-              42
-(1 row)
-
-select obj_description('unreserved_test()'::regprocedure, 'pg_proc');
- obj_description 
------------------
- this is a test
-(1 row)
-
-drop function unreserved_test();
---
--- Test FOREACH over arrays
---
-create function foreach_test(anyarray)
-returns void as $$
-declare x int;
-begin
-  foreach x in array $1
-  loop
-    raise notice '%', x;
-  end loop;
-  end;
-$$ language plpgsql;
-select foreach_test(ARRAY[1,2,3,4]);
-NOTICE:  1
-NOTICE:  2
-NOTICE:  3
-NOTICE:  4
- foreach_test 
---------------
- 
-(1 row)
-
-select foreach_test(ARRAY[[1,2],[3,4]]);
-NOTICE:  1
-NOTICE:  2
-NOTICE:  3
-NOTICE:  4
- foreach_test 
---------------
- 
-(1 row)
-
-create or replace function foreach_test(anyarray)
-returns void as $$
-declare x int;
-begin
-  foreach x slice 1 in array $1
-  loop
-    raise notice '%', x;
-  end loop;
-  end;
-$$ language plpgsql;
--- should fail
-select foreach_test(ARRAY[1,2,3,4]);
-ERROR:  FOREACH ... SLICE loop variable must be of an array type
-CONTEXT:  PL/pgSQL function foreach_test(anyarray) line 4 at FOREACH over array
-select foreach_test(ARRAY[[1,2],[3,4]]);
-ERROR:  FOREACH ... SLICE loop variable must be of an array type
-CONTEXT:  PL/pgSQL function foreach_test(anyarray) line 4 at FOREACH over array
-create or replace function foreach_test(anyarray)
-returns void as $$
-declare x int[];
-begin
-  foreach x slice 1 in array $1
-  loop
-    raise notice '%', x;
-  end loop;
-  end;
-$$ language plpgsql;
-select foreach_test(ARRAY[1,2,3,4]);
-NOTICE:  {1,2,3,4}
- foreach_test 
---------------
- 
-(1 row)
-
-select foreach_test(ARRAY[[1,2],[3,4]]);
-NOTICE:  {1,2}
-NOTICE:  {3,4}
- foreach_test 
---------------
- 
-(1 row)
-
--- higher level of slicing
-create or replace function foreach_test(anyarray)
-returns void as $$
-declare x int[];
-begin
-  foreach x slice 2 in array $1
-  loop
-    raise notice '%', x;
-  end loop;
-  end;
-$$ language plpgsql;
--- should fail
-select foreach_test(ARRAY[1,2,3,4]);
-ERROR:  slice dimension (2) is out of the valid range 0..1
-CONTEXT:  PL/pgSQL function foreach_test(anyarray) line 4 at FOREACH over array
--- ok
-select foreach_test(ARRAY[[1,2],[3,4]]);
-NOTICE:  {{1,2},{3,4}}
- foreach_test 
---------------
- 
-(1 row)
-
-select foreach_test(ARRAY[[[1,2]],[[3,4]]]);
-NOTICE:  {{1,2}}
-NOTICE:  {{3,4}}
- foreach_test 
---------------
- 
-(1 row)
-
-create type xy_tuple AS (x int, y int);
--- iteration over array of records
-create or replace function foreach_test(anyarray)
-returns void as $$
-declare r record;
-begin
-  foreach r in array $1
-  loop
-    raise notice '%', r;
-  end loop;
-  end;
-$$ language plpgsql;
-select foreach_test(ARRAY[(10,20),(40,69),(35,78)]::xy_tuple[]);
-NOTICE:  (10,20)
-NOTICE:  (40,69)
-NOTICE:  (35,78)
- foreach_test 
---------------
- 
-(1 row)
-
-select foreach_test(ARRAY[[(10,20),(40,69)],[(35,78),(88,76)]]::xy_tuple[]);
-NOTICE:  (10,20)
-NOTICE:  (40,69)
-NOTICE:  (35,78)
-NOTICE:  (88,76)
- foreach_test 
---------------
- 
-(1 row)
-
-create or replace function foreach_test(anyarray)
-returns void as $$
-declare x int; y int;
-begin
-  foreach x, y in array $1
-  loop
-    raise notice 'x = %, y = %', x, y;
-  end loop;
-  end;
-$$ language plpgsql;
-select foreach_test(ARRAY[(10,20),(40,69),(35,78)]::xy_tuple[]);
-NOTICE:  x = 10, y = 20
-NOTICE:  x = 40, y = 69
-NOTICE:  x = 35, y = 78
- foreach_test 
---------------
- 
-(1 row)
-
-select foreach_test(ARRAY[[(10,20),(40,69)],[(35,78),(88,76)]]::xy_tuple[]);
-NOTICE:  x = 10, y = 20
-NOTICE:  x = 40, y = 69
-NOTICE:  x = 35, y = 78
-NOTICE:  x = 88, y = 76
- foreach_test 
---------------
- 
-(1 row)
-
--- slicing over array of composite types
-create or replace function foreach_test(anyarray)
-returns void as $$
-declare x xy_tuple[];
-begin
-  foreach x slice 1 in array $1
-  loop
-    raise notice '%', x;
-  end loop;
-  end;
-$$ language plpgsql;
-select foreach_test(ARRAY[(10,20),(40,69),(35,78)]::xy_tuple[]);
-NOTICE:  {"(10,20)","(40,69)","(35,78)"}
- foreach_test 
---------------
- 
-(1 row)
-
-select foreach_test(ARRAY[[(10,20),(40,69)],[(35,78),(88,76)]]::xy_tuple[]);
-NOTICE:  {"(10,20)","(40,69)"}
-NOTICE:  {"(35,78)","(88,76)"}
- foreach_test 
---------------
- 
-(1 row)
-
-drop function foreach_test(anyarray);
-drop type xy_tuple;
---
--- Assorted tests for array subscript assignment
---
-create temp table rtype (id int, ar text[]);
-create function arrayassign1() returns text[] language plpgsql as $$
-declare
- r record;
-begin
-  r := row(12, '{foo,bar,baz}')::rtype;
-  r.ar[2] := 'replace';
-  return r.ar;
-end$$;
-select arrayassign1();
-   arrayassign1    
--------------------
- {foo,replace,baz}
-(1 row)
-
-select arrayassign1(); -- try again to exercise internal caching
-   arrayassign1    
--------------------
- {foo,replace,baz}
-(1 row)
-
-create domain orderedarray as int[2]
-  constraint sorted check (value[1] < value[2]);
-select '{1,2}'::orderedarray;
- orderedarray 
---------------
- {1,2}
-(1 row)
-
-select '{2,1}'::orderedarray;  -- fail
-ERROR:  value for domain orderedarray violates check constraint "sorted"
-create function testoa(x1 int, x2 int, x3 int) returns orderedarray
-language plpgsql as $$
-declare res orderedarray;
-begin
-  res := array[x1, x2];
-  res[2] := x3;
-  return res;
-end$$;
-select testoa(1,2,3);
- testoa 
---------
- {1,3}
-(1 row)
-
-select testoa(1,2,3); -- try again to exercise internal caching
- testoa 
---------
- {1,3}
-(1 row)
-
-select testoa(2,1,3); -- fail at initial assign
-ERROR:  value for domain orderedarray violates check constraint "sorted"
-CONTEXT:  PL/pgSQL function testoa(integer,integer,integer) line 4 at assignment
-select testoa(1,2,1); -- fail at update
-ERROR:  value for domain orderedarray violates check constraint "sorted"
-CONTEXT:  PL/pgSQL function testoa(integer,integer,integer) line 5 at assignment
-drop function arrayassign1();
-drop function testoa(x1 int, x2 int, x3 int);
---
--- Test handling of expanded arrays
---
-create function returns_rw_array(int) returns int[]
-language plpgsql as $$
-  declare r int[];
-  begin r := array[$1, $1]; return r; end;
-$$ stable;
-create function consumes_rw_array(int[]) returns int
-language plpgsql as $$
-  begin return $1[1]; end;
-$$ stable;
-select consumes_rw_array(returns_rw_array(42));
- consumes_rw_array 
--------------------
-                42
-(1 row)
-
--- bug #14174
-explain (verbose, costs off)
-select i, a from
-  (select returns_rw_array(1) as a offset 0) ss,
-  lateral consumes_rw_array(a) i;
-                           QUERY PLAN                            
------------------------------------------------------------------
- Nested Loop
-   Output: i.i, (returns_rw_array(1))
-   ->  Result
-         Output: returns_rw_array(1)
-   ->  Function Scan on public.consumes_rw_array i
-         Output: i.i
-         Function Call: consumes_rw_array((returns_rw_array(1)))
-(7 rows)
-
-select i, a from
-  (select returns_rw_array(1) as a offset 0) ss,
-  lateral consumes_rw_array(a) i;
- i |   a   
----+-------
- 1 | {1,1}
-(1 row)
-
-explain (verbose, costs off)
-select consumes_rw_array(a), a from returns_rw_array(1) a;
-                 QUERY PLAN                 
---------------------------------------------
- Function Scan on public.returns_rw_array a
-   Output: consumes_rw_array(a), a
-   Function Call: returns_rw_array(1)
-(3 rows)
-
-select consumes_rw_array(a), a from returns_rw_array(1) a;
- consumes_rw_array |   a   
--------------------+-------
-                 1 | {1,1}
-(1 row)
-
-explain (verbose, costs off)
-select consumes_rw_array(a), a from
-  (values (returns_rw_array(1)), (returns_rw_array(2))) v(a);
-                             QUERY PLAN                              
----------------------------------------------------------------------
- Values Scan on "*VALUES*"
-   Output: consumes_rw_array("*VALUES*".column1), "*VALUES*".column1
-(2 rows)
-
-select consumes_rw_array(a), a from
-  (values (returns_rw_array(1)), (returns_rw_array(2))) v(a);
- consumes_rw_array |   a   
--------------------+-------
-                 1 | {1,1}
-                 2 | {2,2}
-(2 rows)
-
-do $$
-declare a int[] := array[1,2];
-begin
-  a := a || 3;
-  raise notice 'a = %', a;
-end$$;
-NOTICE:  a = {1,2,3}
---
--- Test access to call stack
---
-create function inner_func(int)
-returns int as $$
-declare _context text;
-begin
-  get diagnostics _context = pg_context;
-  raise notice '***%***', _context;
-  -- lets do it again, just for fun..
-  get diagnostics _context = pg_context;
-  raise notice '***%***', _context;
-  raise notice 'lets make sure we didnt break anything';
-  return 2 * $1;
-end;
-$$ language plpgsql;
-create or replace function outer_func(int)
-returns int as $$
-declare
-  myresult int;
-begin
-  raise notice 'calling down into inner_func()';
-  myresult := inner_func($1);
-  raise notice 'inner_func() done';
-  return myresult;
-end;
-$$ language plpgsql;
-create or replace function outer_outer_func(int)
-returns int as $$
-declare
-  myresult int;
-begin
-  raise notice 'calling down into outer_func()';
-  myresult := outer_func($1);
-  raise notice 'outer_func() done';
-  return myresult;
-end;
-$$ language plpgsql;
-select outer_outer_func(10);
-NOTICE:  calling down into outer_func()
-NOTICE:  calling down into inner_func()
-NOTICE:  ***PL/pgSQL function inner_func(integer) line 4 at GET DIAGNOSTICS
-PL/pgSQL function outer_func(integer) line 6 at assignment
-PL/pgSQL function outer_outer_func(integer) line 6 at assignment***
-NOTICE:  ***PL/pgSQL function inner_func(integer) line 7 at GET DIAGNOSTICS
-PL/pgSQL function outer_func(integer) line 6 at assignment
-PL/pgSQL function outer_outer_func(integer) line 6 at assignment***
-NOTICE:  lets make sure we didnt break anything
-NOTICE:  inner_func() done
-NOTICE:  outer_func() done
- outer_outer_func 
-------------------
-               20
-(1 row)
-
--- repeated call should work
-select outer_outer_func(20);
-NOTICE:  calling down into outer_func()
-NOTICE:  calling down into inner_func()
-NOTICE:  ***PL/pgSQL function inner_func(integer) line 4 at GET DIAGNOSTICS
-PL/pgSQL function outer_func(integer) line 6 at assignment
-PL/pgSQL function outer_outer_func(integer) line 6 at assignment***
-NOTICE:  ***PL/pgSQL function inner_func(integer) line 7 at GET DIAGNOSTICS
-PL/pgSQL function outer_func(integer) line 6 at assignment
-PL/pgSQL function outer_outer_func(integer) line 6 at assignment***
-NOTICE:  lets make sure we didnt break anything
-NOTICE:  inner_func() done
-NOTICE:  outer_func() done
- outer_outer_func 
-------------------
-               40
-(1 row)
-
-drop function outer_outer_func(int);
-drop function outer_func(int);
-drop function inner_func(int);
--- access to call stack from exception
-create function inner_func(int)
-returns int as $$
-declare
-  _context text;
-  sx int := 5;
-begin
-  begin
-    perform sx / 0;
-  exception
-    when division_by_zero then
-      get diagnostics _context = pg_context;
-      raise notice '***%***', _context;
-  end;
-
-  -- lets do it again, just for fun..
-  get diagnostics _context = pg_context;
-  raise notice '***%***', _context;
-  raise notice 'lets make sure we didnt break anything';
-  return 2 * $1;
-end;
-$$ language plpgsql;
-create or replace function outer_func(int)
-returns int as $$
-declare
-  myresult int;
-begin
-  raise notice 'calling down into inner_func()';
-  myresult := inner_func($1);
-  raise notice 'inner_func() done';
-  return myresult;
-end;
-$$ language plpgsql;
-create or replace function outer_outer_func(int)
-returns int as $$
-declare
-  myresult int;
-begin
-  raise notice 'calling down into outer_func()';
-  myresult := outer_func($1);
-  raise notice 'outer_func() done';
-  return myresult;
-end;
-$$ language plpgsql;
-select outer_outer_func(10);
-NOTICE:  calling down into outer_func()
-NOTICE:  calling down into inner_func()
-NOTICE:  ***PL/pgSQL function inner_func(integer) line 10 at GET DIAGNOSTICS
-PL/pgSQL function outer_func(integer) line 6 at assignment
-PL/pgSQL function outer_outer_func(integer) line 6 at assignment***
-NOTICE:  ***PL/pgSQL function inner_func(integer) line 15 at GET DIAGNOSTICS
-PL/pgSQL function outer_func(integer) line 6 at assignment
-PL/pgSQL function outer_outer_func(integer) line 6 at assignment***
-NOTICE:  lets make sure we didnt break anything
-NOTICE:  inner_func() done
-NOTICE:  outer_func() done
- outer_outer_func 
-------------------
-               20
-(1 row)
-
--- repeated call should work
-select outer_outer_func(20);
-NOTICE:  calling down into outer_func()
-NOTICE:  calling down into inner_func()
-NOTICE:  ***PL/pgSQL function inner_func(integer) line 10 at GET DIAGNOSTICS
-PL/pgSQL function outer_func(integer) line 6 at assignment
-PL/pgSQL function outer_outer_func(integer) line 6 at assignment***
-NOTICE:  ***PL/pgSQL function inner_func(integer) line 15 at GET DIAGNOSTICS
-PL/pgSQL function outer_func(integer) line 6 at assignment
-PL/pgSQL function outer_outer_func(integer) line 6 at assignment***
-NOTICE:  lets make sure we didnt break anything
-NOTICE:  inner_func() done
-NOTICE:  outer_func() done
- outer_outer_func 
-------------------
-               40
-(1 row)
-
-drop function outer_outer_func(int);
-drop function outer_func(int);
-drop function inner_func(int);
--- Test pg_routine_oid
-create function current_function(text)
-returns regprocedure as $$
-declare
-  fn_oid regprocedure;
-begin
-  get diagnostics fn_oid = pg_routine_oid;
-  return fn_oid;
-end;
-$$ language plpgsql;
-select current_function('foo');
-    current_function    
-------------------------
- current_function(text)
-(1 row)
-
-drop function current_function(text);
--- shouldn't fail in DO, even though there's no useful data
-do $$
-declare
-  fn_oid oid;
-begin
-  get diagnostics fn_oid = pg_routine_oid;
-  raise notice 'pg_routine_oid = %', fn_oid;
-end;
-$$;
-NOTICE:  pg_routine_oid = 0
---
--- Test ASSERT
---
-do $$
-begin
-  assert 1=1;  -- should succeed
-end;
-$$;
-do $$
-begin
-  assert 1=0;  -- should fail
-end;
-$$;
-ERROR:  assertion failed
-CONTEXT:  PL/pgSQL function inline_code_block line 3 at ASSERT
-do $$
-begin
-  assert NULL;  -- should fail
-end;
-$$;
-ERROR:  assertion failed
-CONTEXT:  PL/pgSQL function inline_code_block line 3 at ASSERT
--- check controlling GUC
-set plpgsql.check_asserts = off;
-do $$
-begin
-  assert 1=0;  -- won't be tested
-end;
-$$;
-reset plpgsql.check_asserts;
--- test custom message
-do $$
-declare var text := 'some value';
-begin
-  assert 1=0, format('assertion failed, var = "%s"', var);
-end;
-$$;
-ERROR:  assertion failed, var = "some value"
-CONTEXT:  PL/pgSQL function inline_code_block line 4 at ASSERT
--- ensure assertions are not trapped by 'others'
-do $$
-begin
-  assert 1=0, 'unhandled assertion';
-exception when others then
-  null; -- do nothing
-end;
-$$;
-ERROR:  unhandled assertion
-CONTEXT:  PL/pgSQL function inline_code_block line 3 at ASSERT
--- Test use of plpgsql in a domain check constraint (cf. bug #14414)
-create function plpgsql_domain_check(val int) returns boolean as $$
-begin return val > 0; end
-$$ language plpgsql immutable;
-create domain plpgsql_domain as integer check(plpgsql_domain_check(value));
-do $$
-declare v_test plpgsql_domain;
-begin
-  v_test := 1;
-end;
-$$;
-do $$
-declare v_test plpgsql_domain := 1;
-begin
-  v_test := 0;  -- fail
-end;
-$$;
-ERROR:  value for domain plpgsql_domain violates check constraint "plpgsql_domain_check"
-CONTEXT:  PL/pgSQL function inline_code_block line 4 at assignment
--- Test handling of expanded array passed to a domain constraint (bug #14472)
-create function plpgsql_arr_domain_check(val int[]) returns boolean as $$
-begin return val[1] > 0; end
-$$ language plpgsql immutable;
-create domain plpgsql_arr_domain as int[] check(plpgsql_arr_domain_check(value));
-do $$
-declare v_test plpgsql_arr_domain;
-begin
-  v_test := array[1];
-  v_test := v_test || 2;
-end;
-$$;
-do $$
-declare v_test plpgsql_arr_domain := array[1];
-begin
-  v_test := 0 || v_test;  -- fail
-end;
-$$;
-ERROR:  value for domain plpgsql_arr_domain violates check constraint "plpgsql_arr_domain_check"
-CONTEXT:  PL/pgSQL function inline_code_block line 4 at assignment
---
--- test usage of transition tables in AFTER triggers
---
-CREATE TABLE transition_table_base (id int PRIMARY KEY, val text);
-CREATE FUNCTION transition_table_base_ins_func()
-  RETURNS trigger
-  LANGUAGE plpgsql
-AS $$
-DECLARE
-  t text;
-  l text;
-BEGIN
-  t = '';
-  FOR l IN EXECUTE
-           $q$
-             EXPLAIN (TIMING off, COSTS off, VERBOSE on)
-             SELECT * FROM newtable
-           $q$ LOOP
-    t = t || l || E'\n';
-  END LOOP;
-
-  RAISE INFO '%', t;
-  RETURN new;
-END;
-$$;
-CREATE TRIGGER transition_table_base_ins_trig
-  AFTER INSERT ON transition_table_base
-  REFERENCING OLD TABLE AS oldtable NEW TABLE AS newtable
-  FOR EACH STATEMENT
-  EXECUTE PROCEDURE transition_table_base_ins_func();
-ERROR:  OLD TABLE can only be specified for a DELETE or UPDATE trigger
-CREATE TRIGGER transition_table_base_ins_trig
-  AFTER INSERT ON transition_table_base
-  REFERENCING NEW TABLE AS newtable
-  FOR EACH STATEMENT
-  EXECUTE PROCEDURE transition_table_base_ins_func();
-INSERT INTO transition_table_base VALUES (1, 'One'), (2, 'Two');
-INFO:  Named Tuplestore Scan
-  Output: id, val
-
-INSERT INTO transition_table_base VALUES (3, 'Three'), (4, 'Four');
-INFO:  Named Tuplestore Scan
-  Output: id, val
-
-CREATE OR REPLACE FUNCTION transition_table_base_upd_func()
-  RETURNS trigger
-  LANGUAGE plpgsql
-AS $$
-DECLARE
-  t text;
-  l text;
-BEGIN
-  t = '';
-  FOR l IN EXECUTE
-           $q$
-             EXPLAIN (TIMING off, COSTS off, VERBOSE on)
-             SELECT * FROM oldtable ot FULL JOIN newtable nt USING (id)
-           $q$ LOOP
-    t = t || l || E'\n';
-  END LOOP;
-
-  RAISE INFO '%', t;
-  RETURN new;
-END;
-$$;
-CREATE TRIGGER transition_table_base_upd_trig
-  AFTER UPDATE ON transition_table_base
-  REFERENCING OLD TABLE AS oldtable NEW TABLE AS newtable
-  FOR EACH STATEMENT
-  EXECUTE PROCEDURE transition_table_base_upd_func();
-UPDATE transition_table_base
-  SET val = '*' || val || '*'
-  WHERE id BETWEEN 2 AND 3;
-INFO:  Hash Full Join
-  Output: COALESCE(ot.id, nt.id), ot.val, nt.val
-  Hash Cond: (ot.id = nt.id)
-  ->  Named Tuplestore Scan
-        Output: ot.id, ot.val
-  ->  Hash
-        Output: nt.id, nt.val
-        ->  Named Tuplestore Scan
-              Output: nt.id, nt.val
-
-CREATE TABLE transition_table_level1
-(
-      level1_no serial NOT NULL ,
-      level1_node_name varchar(255),
-       PRIMARY KEY (level1_no)
-) WITHOUT OIDS;
-CREATE TABLE transition_table_level2
-(
-      level2_no serial NOT NULL ,
-      parent_no int NOT NULL,
-      level1_node_name varchar(255),
-       PRIMARY KEY (level2_no)
-) WITHOUT OIDS;
-CREATE TABLE transition_table_status
-(
-      level int NOT NULL,
-      node_no int NOT NULL,
-      status int,
-       PRIMARY KEY (level, node_no)
-) WITHOUT OIDS;
-CREATE FUNCTION transition_table_level1_ri_parent_del_func()
-  RETURNS TRIGGER
-  LANGUAGE plpgsql
-AS $$
-  DECLARE n bigint;
-  BEGIN
-    PERFORM FROM p JOIN transition_table_level2 c ON c.parent_no = p.level1_no;
-    IF FOUND THEN
-      RAISE EXCEPTION 'RI error';
-    END IF;
-    RETURN NULL;
-  END;
-$$;
-CREATE TRIGGER transition_table_level1_ri_parent_del_trigger
-  AFTER DELETE ON transition_table_level1
-  REFERENCING OLD TABLE AS p
-  FOR EACH STATEMENT EXECUTE PROCEDURE
-    transition_table_level1_ri_parent_del_func();
-CREATE FUNCTION transition_table_level1_ri_parent_upd_func()
-  RETURNS TRIGGER
-  LANGUAGE plpgsql
-AS $$
-  DECLARE
-    x int;
-  BEGIN
-    WITH p AS (SELECT level1_no, sum(delta) cnt
-                 FROM (SELECT level1_no, 1 AS delta FROM i
-                       UNION ALL
-                       SELECT level1_no, -1 AS delta FROM d) w
-                 GROUP BY level1_no
-                 HAVING sum(delta) < 0)
-    SELECT level1_no
-      FROM p JOIN transition_table_level2 c ON c.parent_no = p.level1_no
-      INTO x;
-    IF FOUND THEN
-      RAISE EXCEPTION 'RI error';
-    END IF;
-    RETURN NULL;
-  END;
-$$;
-CREATE TRIGGER transition_table_level1_ri_parent_upd_trigger
-  AFTER UPDATE ON transition_table_level1
-  REFERENCING OLD TABLE AS d NEW TABLE AS i
-  FOR EACH STATEMENT EXECUTE PROCEDURE
-    transition_table_level1_ri_parent_upd_func();
-CREATE FUNCTION transition_table_level2_ri_child_insupd_func()
-  RETURNS TRIGGER
-  LANGUAGE plpgsql
-AS $$
-  BEGIN
-    PERFORM FROM i
-      LEFT JOIN transition_table_level1 p
-        ON p.level1_no IS NOT NULL AND p.level1_no = i.parent_no
-      WHERE p.level1_no IS NULL;
-    IF FOUND THEN
-      RAISE EXCEPTION 'RI error';
-    END IF;
-    RETURN NULL;
-  END;
-$$;
-CREATE TRIGGER transition_table_level2_ri_child_ins_trigger
-  AFTER INSERT ON transition_table_level2
-  REFERENCING NEW TABLE AS i
-  FOR EACH STATEMENT EXECUTE PROCEDURE
-    transition_table_level2_ri_child_insupd_func();
-CREATE TRIGGER transition_table_level2_ri_child_upd_trigger
-  AFTER UPDATE ON transition_table_level2
-  REFERENCING NEW TABLE AS i
-  FOR EACH STATEMENT EXECUTE PROCEDURE
-    transition_table_level2_ri_child_insupd_func();
--- create initial test data
-INSERT INTO transition_table_level1 (level1_no)
-  SELECT generate_series(1,200);
-ANALYZE transition_table_level1;
-INSERT INTO transition_table_level2 (level2_no, parent_no)
-  SELECT level2_no, level2_no / 50 + 1 AS parent_no
-    FROM generate_series(1,9999) level2_no;
-ANALYZE transition_table_level2;
-INSERT INTO transition_table_status (level, node_no, status)
-  SELECT 1, level1_no, 0 FROM transition_table_level1;
-INSERT INTO transition_table_status (level, node_no, status)
-  SELECT 2, level2_no, 0 FROM transition_table_level2;
-ANALYZE transition_table_status;
-INSERT INTO transition_table_level1(level1_no)
-  SELECT generate_series(201,1000);
-ANALYZE transition_table_level1;
--- behave reasonably if someone tries to modify a transition table
-CREATE FUNCTION transition_table_level2_bad_usage_func()
-  RETURNS TRIGGER
-  LANGUAGE plpgsql
-AS $$
-  BEGIN
-    INSERT INTO dx VALUES (1000000, 1000000, 'x');
-    RETURN NULL;
-  END;
-$$;
-CREATE TRIGGER transition_table_level2_bad_usage_trigger
-  AFTER DELETE ON transition_table_level2
-  REFERENCING OLD TABLE AS dx
-  FOR EACH STATEMENT EXECUTE PROCEDURE
-    transition_table_level2_bad_usage_func();
-DELETE FROM transition_table_level2
-  WHERE level2_no BETWEEN 301 AND 305;
-ERROR:  relation "dx" cannot be the target of a modifying statement
-CONTEXT:  SQL statement "INSERT INTO dx VALUES (1000000, 1000000, 'x')"
-PL/pgSQL function transition_table_level2_bad_usage_func() line 3 at SQL statement
-DROP TRIGGER transition_table_level2_bad_usage_trigger
-  ON transition_table_level2;
--- attempt modifications which would break RI (should all fail)
-DELETE FROM transition_table_level1
-  WHERE level1_no = 25;
-ERROR:  RI error
-CONTEXT:  PL/pgSQL function transition_table_level1_ri_parent_del_func() line 6 at RAISE
-UPDATE transition_table_level1 SET level1_no = -1
-  WHERE level1_no = 30;
-ERROR:  RI error
-CONTEXT:  PL/pgSQL function transition_table_level1_ri_parent_upd_func() line 15 at RAISE
-INSERT INTO transition_table_level2 (level2_no, parent_no)
-  VALUES (10000, 10000);
-ERROR:  RI error
-CONTEXT:  PL/pgSQL function transition_table_level2_ri_child_insupd_func() line 8 at RAISE
-UPDATE transition_table_level2 SET parent_no = 2000
-  WHERE level2_no = 40;
-ERROR:  RI error
-CONTEXT:  PL/pgSQL function transition_table_level2_ri_child_insupd_func() line 8 at RAISE
--- attempt modifications which would not break RI (should all succeed)
-DELETE FROM transition_table_level1
-  WHERE level1_no BETWEEN 201 AND 1000;
-DELETE FROM transition_table_level1
-  WHERE level1_no BETWEEN 100000000 AND 100000010;
-SELECT count(*) FROM transition_table_level1;
- count 
--------
-   200
-(1 row)
-
-DELETE FROM transition_table_level2
-  WHERE level2_no BETWEEN 211 AND 220;
-SELECT count(*) FROM transition_table_level2;
- count 
--------
-  9989
-(1 row)
-
-CREATE TABLE alter_table_under_transition_tables
-(
-  id int PRIMARY KEY,
-  name text
-);
-CREATE FUNCTION alter_table_under_transition_tables_upd_func()
-  RETURNS TRIGGER
-  LANGUAGE plpgsql
-AS $$
-BEGIN
-  RAISE WARNING 'old table = %, new table = %',
-                  (SELECT string_agg(id || '=' || name, ',') FROM d),
-                  (SELECT string_agg(id || '=' || name, ',') FROM i);
-  RAISE NOTICE 'one = %', (SELECT 1 FROM alter_table_under_transition_tables LIMIT 1);
-  RETURN NULL;
-END;
-$$;
--- should fail, TRUNCATE is not compatible with transition tables
-CREATE TRIGGER alter_table_under_transition_tables_upd_trigger
-  AFTER TRUNCATE OR UPDATE ON alter_table_under_transition_tables
-  REFERENCING OLD TABLE AS d NEW TABLE AS i
-  FOR EACH STATEMENT EXECUTE PROCEDURE
-    alter_table_under_transition_tables_upd_func();
-ERROR:  TRUNCATE triggers with transition tables are not supported
--- should work
-CREATE TRIGGER alter_table_under_transition_tables_upd_trigger
-  AFTER UPDATE ON alter_table_under_transition_tables
-  REFERENCING OLD TABLE AS d NEW TABLE AS i
-  FOR EACH STATEMENT EXECUTE PROCEDURE
-    alter_table_under_transition_tables_upd_func();
-INSERT INTO alter_table_under_transition_tables
-  VALUES (1, '1'), (2, '2'), (3, '3');
-UPDATE alter_table_under_transition_tables
-  SET name = name || name;
-WARNING:  old table = 1=1,2=2,3=3, new table = 1=11,2=22,3=33
-NOTICE:  one = 1
--- now change 'name' to an integer to see what happens...
-ALTER TABLE alter_table_under_transition_tables
-  ALTER COLUMN name TYPE int USING name::integer;
-UPDATE alter_table_under_transition_tables
-  SET name = (name::text || name::text)::integer;
-WARNING:  old table = 1=11,2=22,3=33, new table = 1=1111,2=2222,3=3333
-NOTICE:  one = 1
--- now drop column 'name'
-ALTER TABLE alter_table_under_transition_tables
-  DROP column name;
-UPDATE alter_table_under_transition_tables
-  SET id = id;
-ERROR:  column or variable "name" does not exist
-LINE 1: (SELECT string_agg(id || '=' || name, ',') FROM d)
-                                        ^
-QUERY:  (SELECT string_agg(id || '=' || name, ',') FROM d)
-CONTEXT:  PL/pgSQL function alter_table_under_transition_tables_upd_func() line 3 at RAISE
---
--- Test multiple reference to a transition table
---
-CREATE TABLE multi_test (i int);
-INSERT INTO multi_test VALUES (1);
-CREATE OR REPLACE FUNCTION multi_test_trig() RETURNS trigger
-LANGUAGE plpgsql AS $$
-BEGIN
-    RAISE NOTICE 'count = %', (SELECT COUNT(*) FROM new_test);
-    RAISE NOTICE 'count union = %',
-      (SELECT COUNT(*)
-       FROM (SELECT * FROM new_test UNION ALL SELECT * FROM new_test) ss);
-    RETURN NULL;
-END$$;
-CREATE TRIGGER my_trigger AFTER UPDATE ON multi_test
-  REFERENCING NEW TABLE AS new_test OLD TABLE as old_test
-  FOR EACH STATEMENT EXECUTE PROCEDURE multi_test_trig();
-UPDATE multi_test SET i = i;
-NOTICE:  count = 1
-NOTICE:  count union = 2
-DROP TABLE multi_test;
-DROP FUNCTION multi_test_trig();
---
--- Check type parsing and record fetching from partitioned tables
---
-CREATE TABLE partitioned_table (a int, b text) PARTITION BY LIST (a);
-CREATE TABLE pt_part1 PARTITION OF partitioned_table FOR VALUES IN (1);
-CREATE TABLE pt_part2 PARTITION OF partitioned_table FOR VALUES IN (2);
-INSERT INTO partitioned_table VALUES (1, 'Row 1');
-INSERT INTO partitioned_table VALUES (2, 'Row 2');
-CREATE OR REPLACE FUNCTION get_from_partitioned_table(partitioned_table.a%type)
-RETURNS partitioned_table AS $$
-DECLARE
-    a_val partitioned_table.a%TYPE;
-    result partitioned_table%ROWTYPE;
-BEGIN
-    a_val := $1;
-    SELECT * INTO result FROM partitioned_table WHERE a = a_val;
-    RETURN result;
-END; $$ LANGUAGE plpgsql;
-NOTICE:  type reference partitioned_table.a%TYPE converted to integer
-SELECT * FROM get_from_partitioned_table(1) AS t;
- a |   b   
----+-------
- 1 | Row 1
-(1 row)
-
-CREATE OR REPLACE FUNCTION list_partitioned_table()
-RETURNS SETOF public.partitioned_table.a%TYPE AS $$
-DECLARE
-    row public.partitioned_table%ROWTYPE;
-    a_val public.partitioned_table.a%TYPE;
-BEGIN
-    FOR row IN SELECT * FROM public.partitioned_table ORDER BY a LOOP
-        a_val := row.a;
-        RETURN NEXT a_val;
-    END LOOP;
-    RETURN;
-END; $$ LANGUAGE plpgsql;
-NOTICE:  type reference public.partitioned_table.a%TYPE converted to integer
-SELECT * FROM list_partitioned_table() AS t;
- t 
----
- 1
- 2
-(2 rows)
-
---
--- Check argument name is used instead of $n in error message
---
-CREATE FUNCTION fx(x WSlot) RETURNS void AS $$
-BEGIN
-  GET DIAGNOSTICS x = ROW_COUNT;
-  RETURN;
-END; $$ LANGUAGE plpgsql;
-ERROR:  "x" is not a scalar variable
-LINE 3:   GET DIAGNOSTICS x = ROW_COUNT;
-                          ^
+WARNING:  terminating connection because of crash of another server process
+DETAIL:  The postmaster has commanded this server process to roll back the current transaction and exit, because another server process exited abnormally and possibly corrupted shared memory.
+HINT:  In a moment you should be able to reconnect to the database and repeat your command.
+server closed the connection unexpectedly
+	This probably means the server terminated abnormally
+	before or while processing the request.
+connection to server was lost
diff -U3 /tmp/cirrus-ci-build/src/test/regress/expected/alter_table.out /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/alter_table.out
--- /tmp/cirrus-ci-build/src/test/regress/expected/alter_table.out	2024-09-20 04:07:18.994684689 +0000
+++ /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/alter_table.out	2024-09-20 04:17:09.005564873 +0000
@@ -1687,3020 +1687,10 @@
 alter table renameColumnChild rename column a to d;
 ERROR:  cannot rename inherited column "a"
 alter table only renameColumnChild rename column a to d;
-ERROR:  inherited column "a" must be renamed in child tables too
-alter table only renameColumn rename column a to d;
-ERROR:  inherited column "a" must be renamed in child tables too
--- these should work
-alter table renameColumn rename column a to d;
-alter table renameColumnChild rename column b to a;
--- these should work
-alter table if exists doesnt_exist_tab rename column a to d;
-NOTICE:  relation "doesnt_exist_tab" does not exist, skipping
-alter table if exists doesnt_exist_tab rename column b to a;
-NOTICE:  relation "doesnt_exist_tab" does not exist, skipping
--- this should work
-alter table renameColumn add column w int;
--- this should fail
-alter table only renameColumn add column x int;
-ERROR:  column must be added to child tables too
--- Test corner cases in dropping of inherited columns
-create table p1 (f1 int, f2 int);
-create table c1 (f1 int not null) inherits(p1);
-NOTICE:  merging column "f1" with inherited definition
--- should be rejected since c1.f1 is inherited
-alter table c1 drop column f1;
-ERROR:  cannot drop inherited column "f1"
--- should work
-alter table p1 drop column f1;
--- c1.f1 is still there, but no longer inherited
-select f1 from c1;
- f1 
-----
-(0 rows)
-
-alter table c1 drop column f1;
-select f1 from c1;
-ERROR:  column or variable "f1" does not exist
-LINE 1: select f1 from c1;
-               ^
-HINT:  Perhaps you meant to reference the column "c1.f2".
-drop table p1 cascade;
-NOTICE:  drop cascades to table c1
-create table p1 (f1 int, f2 int);
-create table c1 () inherits(p1);
--- should be rejected since c1.f1 is inherited
-alter table c1 drop column f1;
-ERROR:  cannot drop inherited column "f1"
-alter table p1 drop column f1;
--- c1.f1 is dropped now, since there is no local definition for it
-select f1 from c1;
-ERROR:  column or variable "f1" does not exist
-LINE 1: select f1 from c1;
-               ^
-HINT:  Perhaps you meant to reference the column "c1.f2".
-drop table p1 cascade;
-NOTICE:  drop cascades to table c1
-create table p1 (f1 int, f2 int);
-create table c1 () inherits(p1);
--- should be rejected since c1.f1 is inherited
-alter table c1 drop column f1;
-ERROR:  cannot drop inherited column "f1"
-alter table only p1 drop column f1;
--- c1.f1 is NOT dropped, but must now be considered non-inherited
-alter table c1 drop column f1;
-drop table p1 cascade;
-NOTICE:  drop cascades to table c1
-create table p1 (f1 int, f2 int);
-create table c1 (f1 int not null) inherits(p1);
-NOTICE:  merging column "f1" with inherited definition
--- should be rejected since c1.f1 is inherited
-alter table c1 drop column f1;
-ERROR:  cannot drop inherited column "f1"
-alter table only p1 drop column f1;
--- c1.f1 is still there, but no longer inherited
-alter table c1 drop column f1;
-drop table p1 cascade;
-NOTICE:  drop cascades to table c1
-create table p1(id int, name text);
-create table p2(id2 int, name text, height int);
-create table c1(age int) inherits(p1,p2);
-NOTICE:  merging multiple inherited definitions of column "name"
-create table gc1() inherits (c1);
-select relname, attname, attinhcount, attislocal
-from pg_class join pg_attribute on (pg_class.oid = pg_attribute.attrelid)
-where relname in ('p1','p2','c1','gc1') and attnum > 0 and not attisdropped
-order by relname, attnum;
- relname | attname | attinhcount | attislocal 
----------+---------+-------------+------------
- c1      | id      |           1 | f
- c1      | name    |           2 | f
- c1      | id2     |           1 | f
- c1      | height  |           1 | f
- c1      | age     |           0 | t
- gc1     | id      |           1 | f
- gc1     | name    |           1 | f
- gc1     | id2     |           1 | f
- gc1     | height  |           1 | f
- gc1     | age     |           1 | f
- p1      | id      |           0 | t
- p1      | name    |           0 | t
- p2      | id2     |           0 | t
- p2      | name    |           0 | t
- p2      | height  |           0 | t
-(15 rows)
-
--- should work
-alter table only p1 drop column name;
--- should work. Now c1.name is local and inhcount is 0.
-alter table p2 drop column name;
--- should be rejected since its inherited
-alter table gc1 drop column name;
-ERROR:  cannot drop inherited column "name"
--- should work, and drop gc1.name along
-alter table c1 drop column name;
--- should fail: column does not exist
-alter table gc1 drop column name;
-ERROR:  column "name" of relation "gc1" does not exist
--- should work and drop the attribute in all tables
-alter table p2 drop column height;
--- IF EXISTS test
-create table dropColumnExists ();
-alter table dropColumnExists drop column non_existing; --fail
-ERROR:  column "non_existing" of relation "dropcolumnexists" does not exist
-alter table dropColumnExists drop column if exists non_existing; --succeed
-NOTICE:  column "non_existing" of relation "dropcolumnexists" does not exist, skipping
-select relname, attname, attinhcount, attislocal
-from pg_class join pg_attribute on (pg_class.oid = pg_attribute.attrelid)
-where relname in ('p1','p2','c1','gc1') and attnum > 0 and not attisdropped
-order by relname, attnum;
- relname | attname | attinhcount | attislocal 
----------+---------+-------------+------------
- c1      | id      |           1 | f
- c1      | id2     |           1 | f
- c1      | age     |           0 | t
- gc1     | id      |           1 | f
- gc1     | id2     |           1 | f
- gc1     | age     |           1 | f
- p1      | id      |           0 | t
- p2      | id2     |           0 | t
-(8 rows)
-
-drop table p1, p2 cascade;
-NOTICE:  drop cascades to 2 other objects
-DETAIL:  drop cascades to table c1
-drop cascades to table gc1
--- test attinhcount tracking with merged columns
-create table depth0();
-create table depth1(c text) inherits (depth0);
-create table depth2() inherits (depth1);
-alter table depth0 add c text;
-NOTICE:  merging definition of column "c" for child "depth1"
-select attrelid::regclass, attname, attinhcount, attislocal
-from pg_attribute
-where attnum > 0 and attrelid::regclass in ('depth0', 'depth1', 'depth2')
-order by attrelid::regclass::text, attnum;
- attrelid | attname | attinhcount | attislocal 
-----------+---------+-------------+------------
- depth0   | c       |           0 | t
- depth1   | c       |           1 | t
- depth2   | c       |           1 | f
-(3 rows)
-
--- test renumbering of child-table columns in inherited operations
-create table p1 (f1 int);
-create table c1 (f2 text, f3 int) inherits (p1);
-alter table p1 add column a1 int check (a1 > 0);
-alter table p1 add column f2 text;
-NOTICE:  merging definition of column "f2" for child "c1"
-insert into p1 values (1,2,'abc');
-insert into c1 values(11,'xyz',33,0); -- should fail
-ERROR:  new row for relation "c1" violates check constraint "p1_a1_check"
-DETAIL:  Failing row contains (11, xyz, 33, 0).
-insert into c1 values(11,'xyz',33,22);
-select * from p1;
- f1 | a1 | f2  
-----+----+-----
-  1 |  2 | abc
- 11 | 22 | xyz
-(2 rows)
-
-update p1 set a1 = a1 + 1, f2 = upper(f2);
-select * from p1;
- f1 | a1 | f2  
-----+----+-----
-  1 |  3 | ABC
- 11 | 23 | XYZ
-(2 rows)
-
-drop table p1 cascade;
-NOTICE:  drop cascades to table c1
--- test that operations with a dropped column do not try to reference
--- its datatype
-create domain mytype as text;
-create temp table foo (f1 text, f2 mytype, f3 text);
-insert into foo values('bb','cc','dd');
-select * from foo;
- f1 | f2 | f3 
-----+----+----
- bb | cc | dd
-(1 row)
-
-drop domain mytype cascade;
-NOTICE:  drop cascades to column f2 of table foo
-select * from foo;
- f1 | f3 
-----+----
- bb | dd
-(1 row)
-
-insert into foo values('qq','rr');
-select * from foo;
- f1 | f3 
-----+----
- bb | dd
- qq | rr
-(2 rows)
-
-update foo set f3 = 'zz';
-select * from foo;
- f1 | f3 
-----+----
- bb | zz
- qq | zz
-(2 rows)
-
-select f3,max(f1) from foo group by f3;
- f3 | max 
-----+-----
- zz | qq
-(1 row)
-
--- Simple tests for alter table column type
-alter table foo alter f1 TYPE integer; -- fails
-ERROR:  column "f1" cannot be cast automatically to type integer
-HINT:  You might need to specify "USING f1::integer".
-alter table foo alter f1 TYPE varchar(10);
-create table anothertab (atcol1 serial8, atcol2 boolean,
-	constraint anothertab_chk check (atcol1 <= 3));
-insert into anothertab (atcol1, atcol2) values (default, true);
-insert into anothertab (atcol1, atcol2) values (default, false);
-select * from anothertab;
- atcol1 | atcol2 
---------+--------
-      1 | t
-      2 | f
-(2 rows)
-
-alter table anothertab alter column atcol1 type boolean; -- fails
-ERROR:  column "atcol1" cannot be cast automatically to type boolean
-HINT:  You might need to specify "USING atcol1::boolean".
-alter table anothertab alter column atcol1 type boolean using atcol1::int; -- fails
-ERROR:  result of USING clause for column "atcol1" cannot be cast automatically to type boolean
-HINT:  You might need to add an explicit cast.
-alter table anothertab alter column atcol1 type integer;
-select * from anothertab;
- atcol1 | atcol2 
---------+--------
-      1 | t
-      2 | f
-(2 rows)
-
-insert into anothertab (atcol1, atcol2) values (45, null); -- fails
-ERROR:  new row for relation "anothertab" violates check constraint "anothertab_chk"
-DETAIL:  Failing row contains (45, null).
-insert into anothertab (atcol1, atcol2) values (default, null);
-select * from anothertab;
- atcol1 | atcol2 
---------+--------
-      1 | t
-      2 | f
-      3 | 
-(3 rows)
-
-alter table anothertab alter column atcol2 type text
-      using case when atcol2 is true then 'IT WAS TRUE'
-                 when atcol2 is false then 'IT WAS FALSE'
-                 else 'IT WAS NULL!' end;
-select * from anothertab;
- atcol1 |    atcol2    
---------+--------------
-      1 | IT WAS TRUE
-      2 | IT WAS FALSE
-      3 | IT WAS NULL!
-(3 rows)
-
-alter table anothertab alter column atcol1 type boolean
-        using case when atcol1 % 2 = 0 then true else false end; -- fails
-ERROR:  default for column "atcol1" cannot be cast automatically to type boolean
-alter table anothertab alter column atcol1 drop default;
-alter table anothertab alter column atcol1 type boolean
-        using case when atcol1 % 2 = 0 then true else false end; -- fails
-ERROR:  operator does not exist: boolean <= integer
-HINT:  No operator matches the given name and argument types. You might need to add explicit type casts.
-alter table anothertab drop constraint anothertab_chk;
-alter table anothertab drop constraint anothertab_chk; -- fails
-ERROR:  constraint "anothertab_chk" of relation "anothertab" does not exist
-alter table anothertab drop constraint IF EXISTS anothertab_chk; -- succeeds
-NOTICE:  constraint "anothertab_chk" of relation "anothertab" does not exist, skipping
-alter table anothertab alter column atcol1 type boolean
-        using case when atcol1 % 2 = 0 then true else false end;
-select * from anothertab;
- atcol1 |    atcol2    
---------+--------------
- f      | IT WAS TRUE
- t      | IT WAS FALSE
- f      | IT WAS NULL!
-(3 rows)
-
-drop table anothertab;
--- Test index handling in alter table column type (cf. bugs #15835, #15865)
-create table anothertab(f1 int primary key, f2 int unique,
-                        f3 int, f4 int, f5 int);
-alter table anothertab
-  add exclude using btree (f3 with =);
-alter table anothertab
-  add exclude using btree (f4 with =) where (f4 is not null);
-alter table anothertab
-  add exclude using btree (f4 with =) where (f5 > 0);
-alter table anothertab
-  add unique(f1,f4);
-create index on anothertab(f2,f3);
-create unique index on anothertab(f4);
-\d anothertab
-             Table "public.anothertab"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- f1     | integer |           | not null | 
- f2     | integer |           |          | 
- f3     | integer |           |          | 
- f4     | integer |           |          | 
- f5     | integer |           |          | 
-Indexes:
-    "anothertab_pkey" PRIMARY KEY, btree (f1)
-    "anothertab_f1_f4_key" UNIQUE CONSTRAINT, btree (f1, f4)
-    "anothertab_f2_f3_idx" btree (f2, f3)
-    "anothertab_f2_key" UNIQUE CONSTRAINT, btree (f2)
-    "anothertab_f3_excl" EXCLUDE USING btree (f3 WITH =)
-    "anothertab_f4_excl" EXCLUDE USING btree (f4 WITH =) WHERE (f4 IS NOT NULL)
-    "anothertab_f4_excl1" EXCLUDE USING btree (f4 WITH =) WHERE (f5 > 0)
-    "anothertab_f4_idx" UNIQUE, btree (f4)
-
-alter table anothertab alter column f1 type bigint;
-alter table anothertab
-  alter column f2 type bigint,
-  alter column f3 type bigint,
-  alter column f4 type bigint;
-alter table anothertab alter column f5 type bigint;
-\d anothertab
-            Table "public.anothertab"
- Column |  Type  | Collation | Nullable | Default 
---------+--------+-----------+----------+---------
- f1     | bigint |           | not null | 
- f2     | bigint |           |          | 
- f3     | bigint |           |          | 
- f4     | bigint |           |          | 
- f5     | bigint |           |          | 
-Indexes:
-    "anothertab_pkey" PRIMARY KEY, btree (f1)
-    "anothertab_f1_f4_key" UNIQUE CONSTRAINT, btree (f1, f4)
-    "anothertab_f2_f3_idx" btree (f2, f3)
-    "anothertab_f2_key" UNIQUE CONSTRAINT, btree (f2)
-    "anothertab_f3_excl" EXCLUDE USING btree (f3 WITH =)
-    "anothertab_f4_excl" EXCLUDE USING btree (f4 WITH =) WHERE (f4 IS NOT NULL)
-    "anothertab_f4_excl1" EXCLUDE USING btree (f4 WITH =) WHERE (f5 > 0)
-    "anothertab_f4_idx" UNIQUE, btree (f4)
-
-drop table anothertab;
--- test that USING expressions are parsed before column alter type / drop steps
-create table another (f1 int, f2 text, f3 text);
-insert into another values(1, 'one', 'uno');
-insert into another values(2, 'two', 'due');
-insert into another values(3, 'three', 'tre');
-select * from another;
- f1 |  f2   | f3  
-----+-------+-----
-  1 | one   | uno
-  2 | two   | due
-  3 | three | tre
-(3 rows)
-
-alter table another
-  alter f1 type text using f2 || ' and ' || f3 || ' more',
-  alter f2 type bigint using f1 * 10,
-  drop column f3;
-select * from another;
-         f1         | f2 
---------------------+----
- one and uno more   | 10
- two and due more   | 20
- three and tre more | 30
-(3 rows)
-
-drop table another;
--- Create an index that skips WAL, then perform a SET DATA TYPE that skips
--- rewriting the index.
-begin;
-create table skip_wal_skip_rewrite_index (c varchar(10) primary key);
-alter table skip_wal_skip_rewrite_index alter c type varchar(20);
-commit;
--- We disallow changing table's row type if it's used for storage
-create table at_tab1 (a int, b text);
-create table at_tab2 (x int, y at_tab1);
-alter table at_tab1 alter column b type varchar; -- fails
-ERROR:  cannot alter table "at_tab1" because column "at_tab2.y" uses its row type
-drop table at_tab2;
--- Use of row type in an expression is defended differently
-create table at_tab2 (x int, y text, check((x,y)::at_tab1 = (1,'42')::at_tab1));
-alter table at_tab1 alter column b type varchar; -- allowed, but ...
-insert into at_tab2 values(1,'42'); -- ... this will fail
-ERROR:  ROW() column has type text instead of type character varying
-drop table at_tab1, at_tab2;
--- Check it for a partitioned table, too
-create table at_tab1 (a int, b text) partition by list(a);
-create table at_tab2 (x int, y at_tab1);
-alter table at_tab1 alter column b type varchar; -- fails
-ERROR:  cannot alter table "at_tab1" because column "at_tab2.y" uses its row type
-drop table at_tab1, at_tab2;
--- Alter column type that's part of a partitioned index
-create table at_partitioned (a int, b text) partition by range (a);
-create table at_part_1 partition of at_partitioned for values from (0) to (1000);
-insert into at_partitioned values (512, '0.123');
-create table at_part_2 (b text, a int);
-insert into at_part_2 values ('1.234', 1024);
-create index on at_partitioned (b);
-create index on at_partitioned (a);
-\d at_part_1
-             Table "public.at_part_1"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           |          | 
- b      | text    |           |          | 
-Partition of: at_partitioned FOR VALUES FROM (0) TO (1000)
-Indexes:
-    "at_part_1_a_idx" btree (a)
-    "at_part_1_b_idx" btree (b)
-
-\d at_part_2
-             Table "public.at_part_2"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- b      | text    |           |          | 
- a      | integer |           |          | 
-
-alter table at_partitioned attach partition at_part_2 for values from (1000) to (2000);
-\d at_part_2
-             Table "public.at_part_2"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- b      | text    |           |          | 
- a      | integer |           |          | 
-Partition of: at_partitioned FOR VALUES FROM (1000) TO (2000)
-Indexes:
-    "at_part_2_a_idx" btree (a)
-    "at_part_2_b_idx" btree (b)
-
-alter table at_partitioned alter column b type numeric using b::numeric;
-\d at_part_1
-             Table "public.at_part_1"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           |          | 
- b      | numeric |           |          | 
-Partition of: at_partitioned FOR VALUES FROM (0) TO (1000)
-Indexes:
-    "at_part_1_a_idx" btree (a)
-    "at_part_1_b_idx" btree (b)
-
-\d at_part_2
-             Table "public.at_part_2"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- b      | numeric |           |          | 
- a      | integer |           |          | 
-Partition of: at_partitioned FOR VALUES FROM (1000) TO (2000)
-Indexes:
-    "at_part_2_a_idx" btree (a)
-    "at_part_2_b_idx" btree (b)
-
-drop table at_partitioned;
--- Alter column type when no table rewrite is required
--- Also check that comments are preserved
-create table at_partitioned(id int, name varchar(64), unique (id, name))
-  partition by hash(id);
-comment on constraint at_partitioned_id_name_key on at_partitioned is 'parent constraint';
-comment on index at_partitioned_id_name_key is 'parent index';
-create table at_partitioned_0 partition of at_partitioned
-  for values with (modulus 2, remainder 0);
-comment on constraint at_partitioned_0_id_name_key on at_partitioned_0 is 'child 0 constraint';
-comment on index at_partitioned_0_id_name_key is 'child 0 index';
-create table at_partitioned_1 partition of at_partitioned
-  for values with (modulus 2, remainder 1);
-comment on constraint at_partitioned_1_id_name_key on at_partitioned_1 is 'child 1 constraint';
-comment on index at_partitioned_1_id_name_key is 'child 1 index';
-insert into at_partitioned values(1, 'foo');
-insert into at_partitioned values(3, 'bar');
-create temp table old_oids as
-  select relname, oid as oldoid, relfilenode as oldfilenode
-  from pg_class where relname like 'at_partitioned%';
-select relname,
-  c.oid = oldoid as orig_oid,
-  case relfilenode
-    when 0 then 'none'
-    when c.oid then 'own'
-    when oldfilenode then 'orig'
-    else 'OTHER'
-    end as storage,
-  obj_description(c.oid, 'pg_class') as desc
-  from pg_class c left join old_oids using (relname)
-  where relname like 'at_partitioned%'
-  order by relname;
-           relname            | orig_oid | storage |     desc      
-------------------------------+----------+---------+---------------
- at_partitioned               | t        | none    | 
- at_partitioned_0             | t        | own     | 
- at_partitioned_0_id_name_key | t        | own     | child 0 index
- at_partitioned_1             | t        | own     | 
- at_partitioned_1_id_name_key | t        | own     | child 1 index
- at_partitioned_id_name_key   | t        | none    | parent index
-(6 rows)
-
-select conname, obj_description(oid, 'pg_constraint') as desc
-  from pg_constraint where conname like 'at_partitioned%'
-  order by conname;
-           conname            |        desc        
-------------------------------+--------------------
- at_partitioned_0_id_name_key | child 0 constraint
- at_partitioned_1_id_name_key | child 1 constraint
- at_partitioned_id_name_key   | parent constraint
-(3 rows)
-
-alter table at_partitioned alter column name type varchar(127);
--- Note: these tests currently show the wrong behavior for comments :-(
-select relname,
-  c.oid = oldoid as orig_oid,
-  case relfilenode
-    when 0 then 'none'
-    when c.oid then 'own'
-    when oldfilenode then 'orig'
-    else 'OTHER'
-    end as storage,
-  obj_description(c.oid, 'pg_class') as desc
-  from pg_class c left join old_oids using (relname)
-  where relname like 'at_partitioned%'
-  order by relname;
-           relname            | orig_oid | storage |     desc     
-------------------------------+----------+---------+--------------
- at_partitioned               | t        | none    | 
- at_partitioned_0             | t        | own     | 
- at_partitioned_0_id_name_key | f        | own     | parent index
- at_partitioned_1             | t        | own     | 
- at_partitioned_1_id_name_key | f        | own     | parent index
- at_partitioned_id_name_key   | f        | none    | parent index
-(6 rows)
-
-select conname, obj_description(oid, 'pg_constraint') as desc
-  from pg_constraint where conname like 'at_partitioned%'
-  order by conname;
-           conname            |       desc        
-------------------------------+-------------------
- at_partitioned_0_id_name_key | 
- at_partitioned_1_id_name_key | 
- at_partitioned_id_name_key   | parent constraint
-(3 rows)
-
--- Don't remove this DROP, it exposes bug #15672
-drop table at_partitioned;
--- disallow recursive containment of row types
-create temp table recur1 (f1 int);
-alter table recur1 add column f2 recur1; -- fails
-ERROR:  composite type recur1 cannot be made a member of itself
-alter table recur1 add column f2 recur1[]; -- fails
-ERROR:  composite type recur1 cannot be made a member of itself
-create domain array_of_recur1 as recur1[];
-alter table recur1 add column f2 array_of_recur1; -- fails
-ERROR:  composite type recur1 cannot be made a member of itself
-create temp table recur2 (f1 int, f2 recur1);
-alter table recur1 add column f2 recur2; -- fails
-ERROR:  composite type recur1 cannot be made a member of itself
-alter table recur1 add column f2 int;
-alter table recur1 alter column f2 type recur2; -- fails
-ERROR:  composite type recur1 cannot be made a member of itself
--- SET STORAGE may need to add a TOAST table
-create table test_storage (a text, c text storage plain);
-select reltoastrelid <> 0 as has_toast_table
-  from pg_class where oid = 'test_storage'::regclass;
- has_toast_table 
------------------
- t
-(1 row)
-
-alter table test_storage alter a set storage plain;
--- rewrite table to remove its TOAST table; need a non-constant column default
-alter table test_storage add b int default random()::int;
-select reltoastrelid <> 0 as has_toast_table
-  from pg_class where oid = 'test_storage'::regclass;
- has_toast_table 
------------------
- f
-(1 row)
-
-alter table test_storage alter a set storage default; -- re-add TOAST table
-select reltoastrelid <> 0 as has_toast_table
-  from pg_class where oid = 'test_storage'::regclass;
- has_toast_table 
------------------
- t
-(1 row)
-
--- check STORAGE correctness
-create table test_storage_failed (a text, b int storage extended);
-ERROR:  column data type integer can only have storage PLAIN
--- test that SET STORAGE propagates to index correctly
-create index test_storage_idx on test_storage (b, a);
-alter table test_storage alter column a set storage external;
-\d+ test_storage
-                                     Table "public.test_storage"
- Column |  Type   | Collation | Nullable |      Default      | Storage  | Stats target | Description 
---------+---------+-----------+----------+-------------------+----------+--------------+-------------
- a      | text    |           |          |                   | external |              | 
- c      | text    |           |          |                   | plain    |              | 
- b      | integer |           |          | random()::integer | plain    |              | 
-Indexes:
-    "test_storage_idx" btree (b, a)
-
-\d+ test_storage_idx
-                Index "public.test_storage_idx"
- Column |  Type   | Key? | Definition | Storage  | Stats target 
---------+---------+------+------------+----------+--------------
- b      | integer | yes  | b          | plain    | 
- a      | text    | yes  | a          | external | 
-btree, for table "public.test_storage"
-
--- ALTER COLUMN TYPE with a check constraint and a child table (bug #13779)
-CREATE TABLE test_inh_check (a float check (a > 10.2), b float);
-CREATE TABLE test_inh_check_child() INHERITS(test_inh_check);
-\d test_inh_check
-               Table "public.test_inh_check"
- Column |       Type       | Collation | Nullable | Default 
---------+------------------+-----------+----------+---------
- a      | double precision |           |          | 
- b      | double precision |           |          | 
-Check constraints:
-    "test_inh_check_a_check" CHECK (a > 10.2::double precision)
-Number of child tables: 1 (Use \d+ to list them.)
-
-\d test_inh_check_child
-            Table "public.test_inh_check_child"
- Column |       Type       | Collation | Nullable | Default 
---------+------------------+-----------+----------+---------
- a      | double precision |           |          | 
- b      | double precision |           |          | 
-Check constraints:
-    "test_inh_check_a_check" CHECK (a > 10.2::double precision)
-Inherits: test_inh_check
-
-select relname, conname, coninhcount, conislocal, connoinherit
-  from pg_constraint c, pg_class r
-  where relname like 'test_inh_check%' and c.conrelid = r.oid
-  order by 1, 2;
-       relname        |        conname         | coninhcount | conislocal | connoinherit 
-----------------------+------------------------+-------------+------------+--------------
- test_inh_check       | test_inh_check_a_check |           0 | t          | f
- test_inh_check_child | test_inh_check_a_check |           1 | f          | f
-(2 rows)
-
-ALTER TABLE test_inh_check ALTER COLUMN a TYPE numeric;
-\d test_inh_check
-               Table "public.test_inh_check"
- Column |       Type       | Collation | Nullable | Default 
---------+------------------+-----------+----------+---------
- a      | numeric          |           |          | 
- b      | double precision |           |          | 
-Check constraints:
-    "test_inh_check_a_check" CHECK (a::double precision > 10.2::double precision)
-Number of child tables: 1 (Use \d+ to list them.)
-
-\d test_inh_check_child
-            Table "public.test_inh_check_child"
- Column |       Type       | Collation | Nullable | Default 
---------+------------------+-----------+----------+---------
- a      | numeric          |           |          | 
- b      | double precision |           |          | 
-Check constraints:
-    "test_inh_check_a_check" CHECK (a::double precision > 10.2::double precision)
-Inherits: test_inh_check
-
-select relname, conname, coninhcount, conislocal, connoinherit
-  from pg_constraint c, pg_class r
-  where relname like 'test_inh_check%' and c.conrelid = r.oid
-  order by 1, 2;
-       relname        |        conname         | coninhcount | conislocal | connoinherit 
-----------------------+------------------------+-------------+------------+--------------
- test_inh_check       | test_inh_check_a_check |           0 | t          | f
- test_inh_check_child | test_inh_check_a_check |           1 | f          | f
-(2 rows)
-
--- also try noinherit, local, and local+inherited cases
-ALTER TABLE test_inh_check ADD CONSTRAINT bnoinherit CHECK (b > 100) NO INHERIT;
-ALTER TABLE test_inh_check_child ADD CONSTRAINT blocal CHECK (b < 1000);
-ALTER TABLE test_inh_check_child ADD CONSTRAINT bmerged CHECK (b > 1);
-ALTER TABLE test_inh_check ADD CONSTRAINT bmerged CHECK (b > 1);
-NOTICE:  merging constraint "bmerged" with inherited definition
-\d test_inh_check
-               Table "public.test_inh_check"
- Column |       Type       | Collation | Nullable | Default 
---------+------------------+-----------+----------+---------
- a      | numeric          |           |          | 
- b      | double precision |           |          | 
-Check constraints:
-    "bmerged" CHECK (b > 1::double precision)
-    "bnoinherit" CHECK (b > 100::double precision) NO INHERIT
-    "test_inh_check_a_check" CHECK (a::double precision > 10.2::double precision)
-Number of child tables: 1 (Use \d+ to list them.)
-
-\d test_inh_check_child
-            Table "public.test_inh_check_child"
- Column |       Type       | Collation | Nullable | Default 
---------+------------------+-----------+----------+---------
- a      | numeric          |           |          | 
- b      | double precision |           |          | 
-Check constraints:
-    "blocal" CHECK (b < 1000::double precision)
-    "bmerged" CHECK (b > 1::double precision)
-    "test_inh_check_a_check" CHECK (a::double precision > 10.2::double precision)
-Inherits: test_inh_check
-
-select relname, conname, coninhcount, conislocal, connoinherit
-  from pg_constraint c, pg_class r
-  where relname like 'test_inh_check%' and c.conrelid = r.oid
-  order by 1, 2;
-       relname        |        conname         | coninhcount | conislocal | connoinherit 
-----------------------+------------------------+-------------+------------+--------------
- test_inh_check       | bmerged                |           0 | t          | f
- test_inh_check       | bnoinherit             |           0 | t          | t
- test_inh_check       | test_inh_check_a_check |           0 | t          | f
- test_inh_check_child | blocal                 |           0 | t          | f
- test_inh_check_child | bmerged                |           1 | t          | f
- test_inh_check_child | test_inh_check_a_check |           1 | f          | f
-(6 rows)
-
-ALTER TABLE test_inh_check ALTER COLUMN b TYPE numeric;
-NOTICE:  merging constraint "bmerged" with inherited definition
-\d test_inh_check
-           Table "public.test_inh_check"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | numeric |           |          | 
- b      | numeric |           |          | 
-Check constraints:
-    "bmerged" CHECK (b::double precision > 1::double precision)
-    "bnoinherit" CHECK (b::double precision > 100::double precision) NO INHERIT
-    "test_inh_check_a_check" CHECK (a::double precision > 10.2::double precision)
-Number of child tables: 1 (Use \d+ to list them.)
-
-\d test_inh_check_child
-        Table "public.test_inh_check_child"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | numeric |           |          | 
- b      | numeric |           |          | 
-Check constraints:
-    "blocal" CHECK (b::double precision < 1000::double precision)
-    "bmerged" CHECK (b::double precision > 1::double precision)
-    "test_inh_check_a_check" CHECK (a::double precision > 10.2::double precision)
-Inherits: test_inh_check
-
-select relname, conname, coninhcount, conislocal, connoinherit
-  from pg_constraint c, pg_class r
-  where relname like 'test_inh_check%' and c.conrelid = r.oid
-  order by 1, 2;
-       relname        |        conname         | coninhcount | conislocal | connoinherit 
-----------------------+------------------------+-------------+------------+--------------
- test_inh_check       | bmerged                |           0 | t          | f
- test_inh_check       | bnoinherit             |           0 | t          | t
- test_inh_check       | test_inh_check_a_check |           0 | t          | f
- test_inh_check_child | blocal                 |           0 | t          | f
- test_inh_check_child | bmerged                |           1 | t          | f
- test_inh_check_child | test_inh_check_a_check |           1 | f          | f
-(6 rows)
-
--- ALTER COLUMN TYPE with different schema in children
--- Bug at https://postgr.es/m/20170102225618.GA10071@telsasoft.com
-CREATE TABLE test_type_diff (f1 int);
-CREATE TABLE test_type_diff_c (extra smallint) INHERITS (test_type_diff);
-ALTER TABLE test_type_diff ADD COLUMN f2 int;
-INSERT INTO test_type_diff_c VALUES (1, 2, 3);
-ALTER TABLE test_type_diff ALTER COLUMN f2 TYPE bigint USING f2::bigint;
-CREATE TABLE test_type_diff2 (int_two int2, int_four int4, int_eight int8);
-CREATE TABLE test_type_diff2_c1 (int_four int4, int_eight int8, int_two int2);
-CREATE TABLE test_type_diff2_c2 (int_eight int8, int_two int2, int_four int4);
-CREATE TABLE test_type_diff2_c3 (int_two int2, int_four int4, int_eight int8);
-ALTER TABLE test_type_diff2_c1 INHERIT test_type_diff2;
-ALTER TABLE test_type_diff2_c2 INHERIT test_type_diff2;
-ALTER TABLE test_type_diff2_c3 INHERIT test_type_diff2;
-INSERT INTO test_type_diff2_c1 VALUES (1, 2, 3);
-INSERT INTO test_type_diff2_c2 VALUES (4, 5, 6);
-INSERT INTO test_type_diff2_c3 VALUES (7, 8, 9);
-ALTER TABLE test_type_diff2 ALTER COLUMN int_four TYPE int8 USING int_four::int8;
--- whole-row references are disallowed
-ALTER TABLE test_type_diff2 ALTER COLUMN int_four TYPE int4 USING (pg_column_size(test_type_diff2));
-ERROR:  cannot convert whole-row table reference
-DETAIL:  USING expression contains a whole-row table reference.
--- check for rollback of ANALYZE corrupting table property flags (bug #11638)
-CREATE TABLE check_fk_presence_1 (id int PRIMARY KEY, t text);
-CREATE TABLE check_fk_presence_2 (id int REFERENCES check_fk_presence_1, t text);
-BEGIN;
-ALTER TABLE check_fk_presence_2 DROP CONSTRAINT check_fk_presence_2_id_fkey;
-ANALYZE check_fk_presence_2;
-ROLLBACK;
-\d check_fk_presence_2
-        Table "public.check_fk_presence_2"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- id     | integer |           |          | 
- t      | text    |           |          | 
-Foreign-key constraints:
-    "check_fk_presence_2_id_fkey" FOREIGN KEY (id) REFERENCES check_fk_presence_1(id)
-
-DROP TABLE check_fk_presence_1, check_fk_presence_2;
--- check column addition within a view (bug #14876)
-create table at_base_table(id int, stuff text);
-insert into at_base_table values (23, 'skidoo');
-create view at_view_1 as select * from at_base_table bt;
-create view at_view_2 as select *, to_json(v1) as j from at_view_1 v1;
-\d+ at_view_1
-                          View "public.at_view_1"
- Column |  Type   | Collation | Nullable | Default | Storage  | Description 
---------+---------+-----------+----------+---------+----------+-------------
- id     | integer |           |          |         | plain    | 
- stuff  | text    |           |          |         | extended | 
-View definition:
- SELECT id,
-    stuff
-   FROM at_base_table bt;
-
-\d+ at_view_2
-                          View "public.at_view_2"
- Column |  Type   | Collation | Nullable | Default | Storage  | Description 
---------+---------+-----------+----------+---------+----------+-------------
- id     | integer |           |          |         | plain    | 
- stuff  | text    |           |          |         | extended | 
- j      | json    |           |          |         | extended | 
-View definition:
- SELECT id,
-    stuff,
-    to_json(v1.*) AS j
-   FROM at_view_1 v1;
-
-explain (verbose, costs off) select * from at_view_2;
-                        QUERY PLAN                        
-----------------------------------------------------------
- Seq Scan on public.at_base_table bt
-   Output: bt.id, bt.stuff, to_json(ROW(bt.id, bt.stuff))
-(2 rows)
-
-select * from at_view_2;
- id | stuff  |             j              
-----+--------+----------------------------
- 23 | skidoo | {"id":23,"stuff":"skidoo"}
-(1 row)
-
-create or replace view at_view_1 as select *, 2+2 as more from at_base_table bt;
-\d+ at_view_1
-                          View "public.at_view_1"
- Column |  Type   | Collation | Nullable | Default | Storage  | Description 
---------+---------+-----------+----------+---------+----------+-------------
- id     | integer |           |          |         | plain    | 
- stuff  | text    |           |          |         | extended | 
- more   | integer |           |          |         | plain    | 
-View definition:
- SELECT id,
-    stuff,
-    2 + 2 AS more
-   FROM at_base_table bt;
-
-\d+ at_view_2
-                          View "public.at_view_2"
- Column |  Type   | Collation | Nullable | Default | Storage  | Description 
---------+---------+-----------+----------+---------+----------+-------------
- id     | integer |           |          |         | plain    | 
- stuff  | text    |           |          |         | extended | 
- j      | json    |           |          |         | extended | 
-View definition:
- SELECT id,
-    stuff,
-    to_json(v1.*) AS j
-   FROM at_view_1 v1;
-
-explain (verbose, costs off) select * from at_view_2;
-                         QUERY PLAN                          
--------------------------------------------------------------
- Seq Scan on public.at_base_table bt
-   Output: bt.id, bt.stuff, to_json(ROW(bt.id, bt.stuff, 4))
-(2 rows)
-
-select * from at_view_2;
- id | stuff  |                  j                  
-----+--------+-------------------------------------
- 23 | skidoo | {"id":23,"stuff":"skidoo","more":4}
-(1 row)
-
-drop view at_view_2;
-drop view at_view_1;
-drop table at_base_table;
--- related case (bug #17811)
-begin;
-create temp table t1 as select * from int8_tbl;
-create temp view v1 as select 1::int8 as q1;
-create temp view v2 as select * from v1;
-create or replace temp view v1 with (security_barrier = true)
-  as select * from t1;
-create temp table log (q1 int8, q2 int8);
-create rule v1_upd_rule as on update to v1
-  do also insert into log values (new.*);
-update v2 set q1 = q1 + 1 where q1 = 123;
-select * from t1;
-        q1        |        q2         
-------------------+-------------------
- 4567890123456789 |               123
- 4567890123456789 |  4567890123456789
- 4567890123456789 | -4567890123456789
-              124 |               456
-              124 |  4567890123456789
-(5 rows)
-
-select * from log;
- q1  |        q2        
------+------------------
- 124 |              456
- 124 | 4567890123456789
-(2 rows)
-
-rollback;
--- check adding a column not itself requiring a rewrite, together with
--- a column requiring a default (bug #16038)
--- ensure that rewrites aren't silently optimized away, removing the
--- value of the test
-CREATE FUNCTION check_ddl_rewrite(p_tablename regclass, p_ddl text)
-RETURNS boolean
-LANGUAGE plpgsql AS $$
-DECLARE
-    v_relfilenode oid;
-BEGIN
-    v_relfilenode := relfilenode FROM pg_class WHERE oid = p_tablename;
-
-    EXECUTE p_ddl;
-
-    RETURN v_relfilenode <> (SELECT relfilenode FROM pg_class WHERE oid = p_tablename);
-END;
-$$;
-CREATE TABLE rewrite_test(col text);
-INSERT INTO rewrite_test VALUES ('something');
-INSERT INTO rewrite_test VALUES (NULL);
--- empty[12] don't need rewrite, but notempty[12]_rewrite will force one
-SELECT check_ddl_rewrite('rewrite_test', $$
-  ALTER TABLE rewrite_test
-      ADD COLUMN empty1 text,
-      ADD COLUMN notempty1_rewrite serial;
-$$);
- check_ddl_rewrite 
--------------------
- t
-(1 row)
-
-SELECT check_ddl_rewrite('rewrite_test', $$
-    ALTER TABLE rewrite_test
-        ADD COLUMN notempty2_rewrite serial,
-        ADD COLUMN empty2 text;
-$$);
- check_ddl_rewrite 
--------------------
- t
-(1 row)
-
--- also check that fast defaults cause no problem, first without rewrite
-SELECT check_ddl_rewrite('rewrite_test', $$
-    ALTER TABLE rewrite_test
-        ADD COLUMN empty3 text,
-        ADD COLUMN notempty3_norewrite int default 42;
-$$);
- check_ddl_rewrite 
--------------------
- f
-(1 row)
-
-SELECT check_ddl_rewrite('rewrite_test', $$
-    ALTER TABLE rewrite_test
-        ADD COLUMN notempty4_norewrite int default 42,
-        ADD COLUMN empty4 text;
-$$);
- check_ddl_rewrite 
--------------------
- f
-(1 row)
-
--- then with rewrite
-SELECT check_ddl_rewrite('rewrite_test', $$
-    ALTER TABLE rewrite_test
-        ADD COLUMN empty5 text,
-        ADD COLUMN notempty5_norewrite int default 42,
-        ADD COLUMN notempty5_rewrite serial;
-$$);
- check_ddl_rewrite 
--------------------
- t
-(1 row)
-
-SELECT check_ddl_rewrite('rewrite_test', $$
-    ALTER TABLE rewrite_test
-        ADD COLUMN notempty6_rewrite serial,
-        ADD COLUMN empty6 text,
-        ADD COLUMN notempty6_norewrite int default 42;
-$$);
- check_ddl_rewrite 
--------------------
- t
-(1 row)
-
--- cleanup
-DROP FUNCTION check_ddl_rewrite(regclass, text);
-DROP TABLE rewrite_test;
---
--- lock levels
---
-drop type lockmodes;
-ERROR:  type "lockmodes" does not exist
-create type lockmodes as enum (
- 'SIReadLock'
-,'AccessShareLock'
-,'RowShareLock'
-,'RowExclusiveLock'
-,'ShareUpdateExclusiveLock'
-,'ShareLock'
-,'ShareRowExclusiveLock'
-,'ExclusiveLock'
-,'AccessExclusiveLock'
-);
-drop view my_locks;
-ERROR:  view "my_locks" does not exist
-create or replace view my_locks as
-select case when c.relname like 'pg_toast%' then 'pg_toast' else c.relname end, max(mode::lockmodes) as max_lockmode
-from pg_locks l join pg_class c on l.relation = c.oid
-where virtualtransaction = (
-        select virtualtransaction
-        from pg_locks
-        where transactionid = pg_current_xact_id()::xid)
-and locktype = 'relation'
-and relnamespace != (select oid from pg_namespace where nspname = 'pg_catalog')
-and c.relname != 'my_locks'
-group by c.relname;
-create table alterlock (f1 int primary key, f2 text);
-insert into alterlock values (1, 'foo');
-create table alterlock2 (f3 int primary key, f1 int);
-insert into alterlock2 values (1, 1);
-begin; alter table alterlock alter column f2 set statistics 150;
-select * from my_locks order by 1;
-  relname  |       max_lockmode       
------------+--------------------------
- alterlock | ShareUpdateExclusiveLock
-(1 row)
-
-rollback;
-begin; alter table alterlock cluster on alterlock_pkey;
-select * from my_locks order by 1;
-    relname     |       max_lockmode       
-----------------+--------------------------
- alterlock      | ShareUpdateExclusiveLock
- alterlock_pkey | ShareUpdateExclusiveLock
-(2 rows)
-
-commit;
-begin; alter table alterlock set without cluster;
-select * from my_locks order by 1;
-  relname  |       max_lockmode       
------------+--------------------------
- alterlock | ShareUpdateExclusiveLock
-(1 row)
-
-commit;
-begin; alter table alterlock set (fillfactor = 100);
-select * from my_locks order by 1;
-  relname  |       max_lockmode       
------------+--------------------------
- alterlock | ShareUpdateExclusiveLock
- pg_toast  | ShareUpdateExclusiveLock
-(2 rows)
-
-commit;
-begin; alter table alterlock reset (fillfactor);
-select * from my_locks order by 1;
-  relname  |       max_lockmode       
------------+--------------------------
- alterlock | ShareUpdateExclusiveLock
- pg_toast  | ShareUpdateExclusiveLock
-(2 rows)
-
-commit;
-begin; alter table alterlock set (toast.autovacuum_enabled = off);
-select * from my_locks order by 1;
-  relname  |       max_lockmode       
------------+--------------------------
- alterlock | ShareUpdateExclusiveLock
- pg_toast  | ShareUpdateExclusiveLock
-(2 rows)
-
-commit;
-begin; alter table alterlock set (autovacuum_enabled = off);
-select * from my_locks order by 1;
-  relname  |       max_lockmode       
------------+--------------------------
- alterlock | ShareUpdateExclusiveLock
- pg_toast  | ShareUpdateExclusiveLock
-(2 rows)
-
-commit;
-begin; alter table alterlock alter column f2 set (n_distinct = 1);
-select * from my_locks order by 1;
-  relname  |       max_lockmode       
------------+--------------------------
- alterlock | ShareUpdateExclusiveLock
-(1 row)
-
-rollback;
--- test that mixing options with different lock levels works as expected
-begin; alter table alterlock set (autovacuum_enabled = off, fillfactor = 80);
-select * from my_locks order by 1;
-  relname  |       max_lockmode       
------------+--------------------------
- alterlock | ShareUpdateExclusiveLock
- pg_toast  | ShareUpdateExclusiveLock
-(2 rows)
-
-commit;
-begin; alter table alterlock alter column f2 set storage extended;
-select * from my_locks order by 1;
-  relname  |    max_lockmode     
------------+---------------------
- alterlock | AccessExclusiveLock
-(1 row)
-
-rollback;
-begin; alter table alterlock alter column f2 set default 'x';
-select * from my_locks order by 1;
-  relname  |    max_lockmode     
------------+---------------------
- alterlock | AccessExclusiveLock
-(1 row)
-
-rollback;
-begin;
-create trigger ttdummy
-	before delete or update on alterlock
-	for each row
-	execute procedure
-	ttdummy (1, 1);
-select * from my_locks order by 1;
-  relname  |     max_lockmode      
------------+-----------------------
- alterlock | ShareRowExclusiveLock
-(1 row)
-
-rollback;
-begin;
-select * from my_locks order by 1;
- relname | max_lockmode 
----------+--------------
-(0 rows)
-
-alter table alterlock2 add foreign key (f1) references alterlock (f1);
-select * from my_locks order by 1;
-     relname     |     max_lockmode      
------------------+-----------------------
- alterlock       | ShareRowExclusiveLock
- alterlock2      | ShareRowExclusiveLock
- alterlock2_pkey | AccessShareLock
- alterlock_pkey  | AccessShareLock
-(4 rows)
-
-rollback;
-begin;
-alter table alterlock2
-add constraint alterlock2nv foreign key (f1) references alterlock (f1) NOT VALID;
-select * from my_locks order by 1;
-  relname   |     max_lockmode      
-------------+-----------------------
- alterlock  | ShareRowExclusiveLock
- alterlock2 | ShareRowExclusiveLock
-(2 rows)
-
-commit;
-begin;
-alter table alterlock2 validate constraint alterlock2nv;
-select * from my_locks order by 1;
-     relname     |       max_lockmode       
------------------+--------------------------
- alterlock       | RowShareLock
- alterlock2      | ShareUpdateExclusiveLock
- alterlock2_pkey | AccessShareLock
- alterlock_pkey  | AccessShareLock
-(4 rows)
-
-rollback;
-create or replace view my_locks as
-select case when c.relname like 'pg_toast%' then 'pg_toast' else c.relname end, max(mode::lockmodes) as max_lockmode
-from pg_locks l join pg_class c on l.relation = c.oid
-where virtualtransaction = (
-        select virtualtransaction
-        from pg_locks
-        where transactionid = pg_current_xact_id()::xid)
-and locktype = 'relation'
-and relnamespace != (select oid from pg_namespace where nspname = 'pg_catalog')
-and c.relname = 'my_locks'
-group by c.relname;
--- raise exception
-alter table my_locks set (autovacuum_enabled = false);
-ERROR:  unrecognized parameter "autovacuum_enabled"
-alter view my_locks set (autovacuum_enabled = false);
-ERROR:  unrecognized parameter "autovacuum_enabled"
-alter table my_locks reset (autovacuum_enabled);
-alter view my_locks reset (autovacuum_enabled);
-begin;
-alter view my_locks set (security_barrier=off);
-select * from my_locks order by 1;
- relname  |    max_lockmode     
-----------+---------------------
- my_locks | AccessExclusiveLock
-(1 row)
-
-alter view my_locks reset (security_barrier);
-rollback;
--- this test intentionally applies the ALTER TABLE command against a view, but
--- uses a view option so we expect this to succeed. This form of SQL is
--- accepted for historical reasons, as shown in the docs for ALTER VIEW
-begin;
-alter table my_locks set (security_barrier=off);
-select * from my_locks order by 1;
- relname  |    max_lockmode     
-----------+---------------------
- my_locks | AccessExclusiveLock
-(1 row)
-
-alter table my_locks reset (security_barrier);
-rollback;
--- cleanup
-drop table alterlock2;
-drop table alterlock;
-drop view my_locks;
-drop type lockmodes;
---
--- alter function
---
-create function test_strict(text) returns text as
-    'select coalesce($1, ''got passed a null'');'
-    language sql returns null on null input;
-select test_strict(NULL);
- test_strict 
--------------
- 
-(1 row)
-
-alter function test_strict(text) called on null input;
-select test_strict(NULL);
-    test_strict    
--------------------
- got passed a null
-(1 row)
-
-create function non_strict(text) returns text as
-    'select coalesce($1, ''got passed a null'');'
-    language sql called on null input;
-select non_strict(NULL);
-    non_strict     
--------------------
- got passed a null
-(1 row)
-
-alter function non_strict(text) returns null on null input;
-select non_strict(NULL);
- non_strict 
-------------
- 
-(1 row)
-
---
--- alter object set schema
---
-create schema alter1;
-create schema alter2;
-create table alter1.t1(f1 serial primary key, f2 int check (f2 > 0));
-create view alter1.v1 as select * from alter1.t1;
-create function alter1.plus1(int) returns int as 'select $1+1' language sql;
-create domain alter1.posint integer check (value > 0);
-create type alter1.ctype as (f1 int, f2 text);
-create function alter1.same(alter1.ctype, alter1.ctype) returns boolean language sql
-as 'select $1.f1 is not distinct from $2.f1 and $1.f2 is not distinct from $2.f2';
-create operator alter1.=(procedure = alter1.same, leftarg  = alter1.ctype, rightarg = alter1.ctype);
-create operator class alter1.ctype_hash_ops default for type alter1.ctype using hash as
-  operator 1 alter1.=(alter1.ctype, alter1.ctype);
-create conversion alter1.latin1_to_utf8 for 'latin1' to 'utf8' from iso8859_1_to_utf8;
-create text search parser alter1.prs(start = prsd_start, gettoken = prsd_nexttoken, end = prsd_end, lextypes = prsd_lextype);
-create text search configuration alter1.cfg(parser = alter1.prs);
-create text search template alter1.tmpl(init = dsimple_init, lexize = dsimple_lexize);
-create text search dictionary alter1.dict(template = alter1.tmpl);
-insert into alter1.t1(f2) values(11);
-insert into alter1.t1(f2) values(12);
-alter table alter1.t1 set schema alter1; -- no-op, same schema
-alter table alter1.t1 set schema alter2;
-alter table alter1.v1 set schema alter2;
-alter function alter1.plus1(int) set schema alter2;
-alter domain alter1.posint set schema alter2;
-alter operator class alter1.ctype_hash_ops using hash set schema alter2;
-alter operator family alter1.ctype_hash_ops using hash set schema alter2;
-alter operator alter1.=(alter1.ctype, alter1.ctype) set schema alter2;
-alter function alter1.same(alter1.ctype, alter1.ctype) set schema alter2;
-alter type alter1.ctype set schema alter1; -- no-op, same schema
-alter type alter1.ctype set schema alter2;
-alter conversion alter1.latin1_to_utf8 set schema alter2;
-alter text search parser alter1.prs set schema alter2;
-alter text search configuration alter1.cfg set schema alter2;
-alter text search template alter1.tmpl set schema alter2;
-alter text search dictionary alter1.dict set schema alter2;
--- this should succeed because nothing is left in alter1
-drop schema alter1;
-insert into alter2.t1(f2) values(13);
-insert into alter2.t1(f2) values(14);
-select * from alter2.t1;
- f1 | f2 
-----+----
-  1 | 11
-  2 | 12
-  3 | 13
-  4 | 14
-(4 rows)
-
-select * from alter2.v1;
- f1 | f2 
-----+----
-  1 | 11
-  2 | 12
-  3 | 13
-  4 | 14
-(4 rows)
-
-select alter2.plus1(41);
- plus1 
--------
-    42
-(1 row)
-
--- clean up
-drop schema alter2 cascade;
-NOTICE:  drop cascades to 13 other objects
-DETAIL:  drop cascades to table alter2.t1
-drop cascades to view alter2.v1
-drop cascades to function alter2.plus1(integer)
-drop cascades to type alter2.posint
-drop cascades to type alter2.ctype
-drop cascades to function alter2.same(alter2.ctype,alter2.ctype)
-drop cascades to operator alter2.=(alter2.ctype,alter2.ctype)
-drop cascades to operator family alter2.ctype_hash_ops for access method hash
-drop cascades to conversion alter2.latin1_to_utf8
-drop cascades to text search parser alter2.prs
-drop cascades to text search configuration alter2.cfg
-drop cascades to text search template alter2.tmpl
-drop cascades to text search dictionary alter2.dict
---
--- composite types
---
-CREATE TYPE test_type AS (a int);
-\d test_type
-         Composite type "public.test_type"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           |          | 
-
-ALTER TYPE nosuchtype ADD ATTRIBUTE b text; -- fails
-ERROR:  relation "nosuchtype" does not exist
-ALTER TYPE test_type ADD ATTRIBUTE b text;
-\d test_type
-         Composite type "public.test_type"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           |          | 
- b      | text    |           |          | 
-
-ALTER TYPE test_type ADD ATTRIBUTE b text; -- fails
-ERROR:  column "b" of relation "test_type" already exists
-ALTER TYPE test_type ALTER ATTRIBUTE b SET DATA TYPE varchar;
-\d test_type
-              Composite type "public.test_type"
- Column |       Type        | Collation | Nullable | Default 
---------+-------------------+-----------+----------+---------
- a      | integer           |           |          | 
- b      | character varying |           |          | 
-
-ALTER TYPE test_type ALTER ATTRIBUTE b SET DATA TYPE integer;
-\d test_type
-         Composite type "public.test_type"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           |          | 
- b      | integer |           |          | 
-
-ALTER TYPE test_type DROP ATTRIBUTE b;
-\d test_type
-         Composite type "public.test_type"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           |          | 
-
-ALTER TYPE test_type DROP ATTRIBUTE c; -- fails
-ERROR:  column "c" of relation "test_type" does not exist
-ALTER TYPE test_type DROP ATTRIBUTE IF EXISTS c;
-NOTICE:  column "c" of relation "test_type" does not exist, skipping
-ALTER TYPE test_type DROP ATTRIBUTE a, ADD ATTRIBUTE d boolean;
-\d test_type
-         Composite type "public.test_type"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- d      | boolean |           |          | 
-
-ALTER TYPE test_type RENAME ATTRIBUTE a TO aa;
-ERROR:  column "a" does not exist
-ALTER TYPE test_type RENAME ATTRIBUTE d TO dd;
-\d test_type
-         Composite type "public.test_type"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- dd     | boolean |           |          | 
-
-DROP TYPE test_type;
-CREATE TYPE test_type1 AS (a int, b text);
-CREATE TABLE test_tbl1 (x int, y test_type1);
-ALTER TYPE test_type1 ALTER ATTRIBUTE b TYPE varchar; -- fails
-ERROR:  cannot alter type "test_type1" because column "test_tbl1.y" uses it
-DROP TABLE test_tbl1;
-CREATE TABLE test_tbl1 (x int, y text);
-CREATE INDEX test_tbl1_idx ON test_tbl1((row(x,y)::test_type1));
-ALTER TYPE test_type1 ALTER ATTRIBUTE b TYPE varchar; -- fails
-ERROR:  cannot alter type "test_type1" because column "test_tbl1_idx.row" uses it
-DROP TABLE test_tbl1;
-DROP TYPE test_type1;
-CREATE TYPE test_type2 AS (a int, b text);
-CREATE TABLE test_tbl2 OF test_type2;
-CREATE TABLE test_tbl2_subclass () INHERITS (test_tbl2);
-\d test_type2
-        Composite type "public.test_type2"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           |          | 
- b      | text    |           |          | 
-
-\d test_tbl2
-             Table "public.test_tbl2"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           |          | 
- b      | text    |           |          | 
-Number of child tables: 1 (Use \d+ to list them.)
-Typed table of type: test_type2
-
-ALTER TYPE test_type2 ADD ATTRIBUTE c text; -- fails
-ERROR:  cannot alter type "test_type2" because it is the type of a typed table
-HINT:  Use ALTER ... CASCADE to alter the typed tables too.
-ALTER TYPE test_type2 ADD ATTRIBUTE c text CASCADE;
-\d test_type2
-        Composite type "public.test_type2"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           |          | 
- b      | text    |           |          | 
- c      | text    |           |          | 
-
-\d test_tbl2
-             Table "public.test_tbl2"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           |          | 
- b      | text    |           |          | 
- c      | text    |           |          | 
-Number of child tables: 1 (Use \d+ to list them.)
-Typed table of type: test_type2
-
-ALTER TYPE test_type2 ALTER ATTRIBUTE b TYPE varchar; -- fails
-ERROR:  cannot alter type "test_type2" because it is the type of a typed table
-HINT:  Use ALTER ... CASCADE to alter the typed tables too.
-ALTER TYPE test_type2 ALTER ATTRIBUTE b TYPE varchar CASCADE;
-\d test_type2
-             Composite type "public.test_type2"
- Column |       Type        | Collation | Nullable | Default 
---------+-------------------+-----------+----------+---------
- a      | integer           |           |          | 
- b      | character varying |           |          | 
- c      | text              |           |          | 
-
-\d test_tbl2
-                  Table "public.test_tbl2"
- Column |       Type        | Collation | Nullable | Default 
---------+-------------------+-----------+----------+---------
- a      | integer           |           |          | 
- b      | character varying |           |          | 
- c      | text              |           |          | 
-Number of child tables: 1 (Use \d+ to list them.)
-Typed table of type: test_type2
-
-ALTER TYPE test_type2 DROP ATTRIBUTE b; -- fails
-ERROR:  cannot alter type "test_type2" because it is the type of a typed table
-HINT:  Use ALTER ... CASCADE to alter the typed tables too.
-ALTER TYPE test_type2 DROP ATTRIBUTE b CASCADE;
-\d test_type2
-        Composite type "public.test_type2"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           |          | 
- c      | text    |           |          | 
-
-\d test_tbl2
-             Table "public.test_tbl2"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           |          | 
- c      | text    |           |          | 
-Number of child tables: 1 (Use \d+ to list them.)
-Typed table of type: test_type2
-
-ALTER TYPE test_type2 RENAME ATTRIBUTE a TO aa; -- fails
-ERROR:  cannot alter type "test_type2" because it is the type of a typed table
-HINT:  Use ALTER ... CASCADE to alter the typed tables too.
-ALTER TYPE test_type2 RENAME ATTRIBUTE a TO aa CASCADE;
-\d test_type2
-        Composite type "public.test_type2"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- aa     | integer |           |          | 
- c      | text    |           |          | 
-
-\d test_tbl2
-             Table "public.test_tbl2"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- aa     | integer |           |          | 
- c      | text    |           |          | 
-Number of child tables: 1 (Use \d+ to list them.)
-Typed table of type: test_type2
-
-\d test_tbl2_subclass
-         Table "public.test_tbl2_subclass"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- aa     | integer |           |          | 
- c      | text    |           |          | 
-Inherits: test_tbl2
-
-DROP TABLE test_tbl2_subclass, test_tbl2;
-DROP TYPE test_type2;
-CREATE TYPE test_typex AS (a int, b text);
-CREATE TABLE test_tblx (x int, y test_typex check ((y).a > 0));
-ALTER TYPE test_typex DROP ATTRIBUTE a; -- fails
-ERROR:  cannot drop column a of composite type test_typex because other objects depend on it
-DETAIL:  constraint test_tblx_y_check on table test_tblx depends on column a of composite type test_typex
-HINT:  Use DROP ... CASCADE to drop the dependent objects too.
-ALTER TYPE test_typex DROP ATTRIBUTE a CASCADE;
-NOTICE:  drop cascades to constraint test_tblx_y_check on table test_tblx
-\d test_tblx
-               Table "public.test_tblx"
- Column |    Type    | Collation | Nullable | Default 
---------+------------+-----------+----------+---------
- x      | integer    |           |          | 
- y      | test_typex |           |          | 
-
-DROP TABLE test_tblx;
-DROP TYPE test_typex;
--- This test isn't that interesting on its own, but the purpose is to leave
--- behind a table to test pg_upgrade with. The table has a composite type
--- column in it, and the composite type has a dropped attribute.
-CREATE TYPE test_type3 AS (a int);
-CREATE TABLE test_tbl3 (c) AS SELECT '(1)'::test_type3;
-ALTER TYPE test_type3 DROP ATTRIBUTE a, ADD ATTRIBUTE b int;
-CREATE TYPE test_type_empty AS ();
-DROP TYPE test_type_empty;
---
--- typed tables: OF / NOT OF
---
-CREATE TYPE tt_t0 AS (z inet, x int, y numeric(8,2));
-ALTER TYPE tt_t0 DROP ATTRIBUTE z;
-CREATE TABLE tt0 (x int NOT NULL, y numeric(8,2));	-- OK
-CREATE TABLE tt1 (x int, y bigint);					-- wrong base type
-CREATE TABLE tt2 (x int, y numeric(9,2));			-- wrong typmod
-CREATE TABLE tt3 (y numeric(8,2), x int);			-- wrong column order
-CREATE TABLE tt4 (x int);							-- too few columns
-CREATE TABLE tt5 (x int, y numeric(8,2), z int);	-- too few columns
-CREATE TABLE tt6 () INHERITS (tt0);					-- can't have a parent
-CREATE TABLE tt7 (x int, q text, y numeric(8,2));
-ALTER TABLE tt7 DROP q;								-- OK
-ALTER TABLE tt0 OF tt_t0;
-ALTER TABLE tt1 OF tt_t0;
-ERROR:  table "tt1" has different type for column "y"
-ALTER TABLE tt2 OF tt_t0;
-ERROR:  table "tt2" has different type for column "y"
-ALTER TABLE tt3 OF tt_t0;
-ERROR:  table has column "y" where type requires "x"
-ALTER TABLE tt4 OF tt_t0;
-ERROR:  table is missing column "y"
-ALTER TABLE tt5 OF tt_t0;
-ERROR:  table has extra column "z"
-ALTER TABLE tt6 OF tt_t0;
-ERROR:  typed tables cannot inherit
-ALTER TABLE tt7 OF tt_t0;
-CREATE TYPE tt_t1 AS (x int, y numeric(8,2));
-ALTER TABLE tt7 OF tt_t1;			-- reassign an already-typed table
-ALTER TABLE tt7 NOT OF;
-\d tt7
-                   Table "public.tt7"
- Column |     Type     | Collation | Nullable | Default 
---------+--------------+-----------+----------+---------
- x      | integer      |           |          | 
- y      | numeric(8,2) |           |          | 
-
--- make sure we can drop a constraint on the parent but it remains on the child
-CREATE TABLE test_drop_constr_parent (c text CHECK (c IS NOT NULL));
-CREATE TABLE test_drop_constr_child () INHERITS (test_drop_constr_parent);
-ALTER TABLE ONLY test_drop_constr_parent DROP CONSTRAINT "test_drop_constr_parent_c_check";
--- should fail
-INSERT INTO test_drop_constr_child (c) VALUES (NULL);
-ERROR:  new row for relation "test_drop_constr_child" violates check constraint "test_drop_constr_parent_c_check"
-DETAIL:  Failing row contains (null).
-DROP TABLE test_drop_constr_parent CASCADE;
-NOTICE:  drop cascades to table test_drop_constr_child
---
--- IF EXISTS test
---
-ALTER TABLE IF EXISTS tt8 ADD COLUMN f int;
-NOTICE:  relation "tt8" does not exist, skipping
-ALTER TABLE IF EXISTS tt8 ADD CONSTRAINT xxx PRIMARY KEY(f);
-NOTICE:  relation "tt8" does not exist, skipping
-ALTER TABLE IF EXISTS tt8 ADD CHECK (f BETWEEN 0 AND 10);
-NOTICE:  relation "tt8" does not exist, skipping
-ALTER TABLE IF EXISTS tt8 ALTER COLUMN f SET DEFAULT 0;
-NOTICE:  relation "tt8" does not exist, skipping
-ALTER TABLE IF EXISTS tt8 RENAME COLUMN f TO f1;
-NOTICE:  relation "tt8" does not exist, skipping
-ALTER TABLE IF EXISTS tt8 SET SCHEMA alter2;
-NOTICE:  relation "tt8" does not exist, skipping
-CREATE TABLE tt8(a int);
-CREATE SCHEMA alter2;
-ALTER TABLE IF EXISTS tt8 ADD COLUMN f int;
-ALTER TABLE IF EXISTS tt8 ADD CONSTRAINT xxx PRIMARY KEY(f);
-ALTER TABLE IF EXISTS tt8 ADD CHECK (f BETWEEN 0 AND 10);
-ALTER TABLE IF EXISTS tt8 ALTER COLUMN f SET DEFAULT 0;
-ALTER TABLE IF EXISTS tt8 RENAME COLUMN f TO f1;
-ALTER TABLE IF EXISTS tt8 SET SCHEMA alter2;
-\d alter2.tt8
-                Table "alter2.tt8"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           |          | 
- f1     | integer |           | not null | 0
-Indexes:
-    "xxx" PRIMARY KEY, btree (f1)
-Check constraints:
-    "tt8_f_check" CHECK (f1 >= 0 AND f1 <= 10)
-
-DROP TABLE alter2.tt8;
-DROP SCHEMA alter2;
---
--- Check conflicts between index and CHECK constraint names
---
-CREATE TABLE tt9(c integer);
-ALTER TABLE tt9 ADD CHECK(c > 1);
-ALTER TABLE tt9 ADD CHECK(c > 2);  -- picks nonconflicting name
-ALTER TABLE tt9 ADD CONSTRAINT foo CHECK(c > 3);
-ALTER TABLE tt9 ADD CONSTRAINT foo CHECK(c > 4);  -- fail, dup name
-ERROR:  constraint "foo" for relation "tt9" already exists
-ALTER TABLE tt9 ADD UNIQUE(c);
-ALTER TABLE tt9 ADD UNIQUE(c);  -- picks nonconflicting name
-ALTER TABLE tt9 ADD CONSTRAINT tt9_c_key UNIQUE(c);  -- fail, dup name
-ERROR:  relation "tt9_c_key" already exists
-ALTER TABLE tt9 ADD CONSTRAINT foo UNIQUE(c);  -- fail, dup name
-ERROR:  constraint "foo" for relation "tt9" already exists
-ALTER TABLE tt9 ADD CONSTRAINT tt9_c_key CHECK(c > 5);  -- fail, dup name
-ERROR:  constraint "tt9_c_key" for relation "tt9" already exists
-ALTER TABLE tt9 ADD CONSTRAINT tt9_c_key2 CHECK(c > 6);
-ALTER TABLE tt9 ADD UNIQUE(c);  -- picks nonconflicting name
-\d tt9
-                Table "public.tt9"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- c      | integer |           |          | 
-Indexes:
-    "tt9_c_key" UNIQUE CONSTRAINT, btree (c)
-    "tt9_c_key1" UNIQUE CONSTRAINT, btree (c)
-    "tt9_c_key3" UNIQUE CONSTRAINT, btree (c)
-Check constraints:
-    "foo" CHECK (c > 3)
-    "tt9_c_check" CHECK (c > 1)
-    "tt9_c_check1" CHECK (c > 2)
-    "tt9_c_key2" CHECK (c > 6)
-
-DROP TABLE tt9;
--- Check that comments on constraints and indexes are not lost at ALTER TABLE.
-CREATE TABLE comment_test (
-  id int,
-  positive_col int CHECK (positive_col > 0),
-  indexed_col int,
-  CONSTRAINT comment_test_pk PRIMARY KEY (id));
-CREATE INDEX comment_test_index ON comment_test(indexed_col);
-COMMENT ON COLUMN comment_test.id IS 'Column ''id'' on comment_test';
-COMMENT ON INDEX comment_test_index IS 'Simple index on comment_test';
-COMMENT ON CONSTRAINT comment_test_positive_col_check ON comment_test IS 'CHECK constraint on comment_test.positive_col';
-COMMENT ON CONSTRAINT comment_test_pk ON comment_test IS 'PRIMARY KEY constraint of comment_test';
-COMMENT ON INDEX comment_test_pk IS 'Index backing the PRIMARY KEY of comment_test';
-SELECT col_description('comment_test'::regclass, 1) as comment;
-           comment           
------------------------------
- Column 'id' on comment_test
-(1 row)
-
-SELECT indexrelid::regclass::text as index, obj_description(indexrelid, 'pg_class') as comment FROM pg_index where indrelid = 'comment_test'::regclass ORDER BY 1, 2;
-       index        |                    comment                    
---------------------+-----------------------------------------------
- comment_test_index | Simple index on comment_test
- comment_test_pk    | Index backing the PRIMARY KEY of comment_test
-(2 rows)
-
-SELECT conname as constraint, obj_description(oid, 'pg_constraint') as comment FROM pg_constraint where conrelid = 'comment_test'::regclass ORDER BY 1, 2;
-           constraint            |                    comment                    
----------------------------------+-----------------------------------------------
- comment_test_pk                 | PRIMARY KEY constraint of comment_test
- comment_test_positive_col_check | CHECK constraint on comment_test.positive_col
-(2 rows)
-
--- Change the datatype of all the columns. ALTER TABLE is optimized to not
--- rebuild an index if the new data type is binary compatible with the old
--- one. Check do a dummy ALTER TABLE that doesn't change the datatype
--- first, to test that no-op codepath, and another one that does.
-ALTER TABLE comment_test ALTER COLUMN indexed_col SET DATA TYPE int;
-ALTER TABLE comment_test ALTER COLUMN indexed_col SET DATA TYPE text;
-ALTER TABLE comment_test ALTER COLUMN id SET DATA TYPE int;
-ALTER TABLE comment_test ALTER COLUMN id SET DATA TYPE text;
-ALTER TABLE comment_test ALTER COLUMN positive_col SET DATA TYPE int;
-ALTER TABLE comment_test ALTER COLUMN positive_col SET DATA TYPE bigint;
--- Check that the comments are intact.
-SELECT col_description('comment_test'::regclass, 1) as comment;
-           comment           
------------------------------
- Column 'id' on comment_test
-(1 row)
-
-SELECT indexrelid::regclass::text as index, obj_description(indexrelid, 'pg_class') as comment FROM pg_index where indrelid = 'comment_test'::regclass ORDER BY 1, 2;
-       index        |                    comment                    
---------------------+-----------------------------------------------
- comment_test_index | Simple index on comment_test
- comment_test_pk    | Index backing the PRIMARY KEY of comment_test
-(2 rows)
-
-SELECT conname as constraint, obj_description(oid, 'pg_constraint') as comment FROM pg_constraint where conrelid = 'comment_test'::regclass ORDER BY 1, 2;
-           constraint            |                    comment                    
----------------------------------+-----------------------------------------------
- comment_test_pk                 | PRIMARY KEY constraint of comment_test
- comment_test_positive_col_check | CHECK constraint on comment_test.positive_col
-(2 rows)
-
--- Check compatibility for foreign keys and comments. This is done
--- separately as rebuilding the column type of the parent leads
--- to an error and would reduce the test scope.
-CREATE TABLE comment_test_child (
-  id text CONSTRAINT comment_test_child_fk REFERENCES comment_test);
-CREATE INDEX comment_test_child_fk ON comment_test_child(id);
-COMMENT ON COLUMN comment_test_child.id IS 'Column ''id'' on comment_test_child';
-COMMENT ON INDEX comment_test_child_fk IS 'Index backing the FOREIGN KEY of comment_test_child';
-COMMENT ON CONSTRAINT comment_test_child_fk ON comment_test_child IS 'FOREIGN KEY constraint of comment_test_child';
--- Change column type of parent
-ALTER TABLE comment_test ALTER COLUMN id SET DATA TYPE text;
-ALTER TABLE comment_test ALTER COLUMN id SET DATA TYPE int USING id::integer;
-ERROR:  foreign key constraint "comment_test_child_fk" cannot be implemented
-DETAIL:  Key columns "id" and "id" are of incompatible types: text and integer.
--- Comments should be intact
-SELECT col_description('comment_test_child'::regclass, 1) as comment;
-              comment              
------------------------------------
- Column 'id' on comment_test_child
-(1 row)
-
-SELECT indexrelid::regclass::text as index, obj_description(indexrelid, 'pg_class') as comment FROM pg_index where indrelid = 'comment_test_child'::regclass ORDER BY 1, 2;
-         index         |                       comment                       
------------------------+-----------------------------------------------------
- comment_test_child_fk | Index backing the FOREIGN KEY of comment_test_child
-(1 row)
-
-SELECT conname as constraint, obj_description(oid, 'pg_constraint') as comment FROM pg_constraint where conrelid = 'comment_test_child'::regclass ORDER BY 1, 2;
-      constraint       |                   comment                    
------------------------+----------------------------------------------
- comment_test_child_fk | FOREIGN KEY constraint of comment_test_child
-(1 row)
-
--- Check that we map relation oids to filenodes and back correctly.  Only
--- display bad mappings so the test output doesn't change all the time.  A
--- filenode function call can return NULL for a relation dropped concurrently
--- with the call's surrounding query, so ignore a NULL mapped_oid for
--- relations that no longer exist after all calls finish.
-CREATE TEMP TABLE filenode_mapping AS
-SELECT
-    oid, mapped_oid, reltablespace, relfilenode, relname
-FROM pg_class,
-    pg_filenode_relation(reltablespace, pg_relation_filenode(oid)) AS mapped_oid
-WHERE relkind IN ('r', 'i', 'S', 't', 'm') AND mapped_oid IS DISTINCT FROM oid;
-SELECT m.* FROM filenode_mapping m LEFT JOIN pg_class c ON c.oid = m.oid
-WHERE c.oid IS NOT NULL OR m.mapped_oid IS NOT NULL;
- oid | mapped_oid | reltablespace | relfilenode | relname 
------+------------+---------------+-------------+---------
-(0 rows)
-
--- Checks on creating and manipulation of user defined relations in
--- pg_catalog.
-SHOW allow_system_table_mods;
- allow_system_table_mods 
--------------------------
- off
-(1 row)
-
--- disallowed because of search_path issues with pg_dump
-CREATE TABLE pg_catalog.new_system_table();
-ERROR:  permission denied to create "pg_catalog.new_system_table"
-DETAIL:  System catalog modifications are currently disallowed.
--- instead create in public first, move to catalog
-CREATE TABLE new_system_table(id serial primary key, othercol text);
-ALTER TABLE new_system_table SET SCHEMA pg_catalog;
-ALTER TABLE new_system_table SET SCHEMA public;
-ALTER TABLE new_system_table SET SCHEMA pg_catalog;
--- will be ignored -- already there:
-ALTER TABLE new_system_table SET SCHEMA pg_catalog;
-ALTER TABLE new_system_table RENAME TO old_system_table;
-CREATE INDEX old_system_table__othercol ON old_system_table (othercol);
-INSERT INTO old_system_table(othercol) VALUES ('somedata'), ('otherdata');
-UPDATE old_system_table SET id = -id;
-DELETE FROM old_system_table WHERE othercol = 'somedata';
-TRUNCATE old_system_table;
-ALTER TABLE old_system_table DROP CONSTRAINT new_system_table_pkey;
-ALTER TABLE old_system_table DROP COLUMN othercol;
-DROP TABLE old_system_table;
--- set logged
-CREATE UNLOGGED TABLE unlogged1(f1 SERIAL PRIMARY KEY, f2 TEXT); -- has sequence, toast
--- check relpersistence of an unlogged table
-SELECT relname, relkind, relpersistence FROM pg_class WHERE relname ~ '^unlogged1'
-UNION ALL
-SELECT r.relname || ' toast table', t.relkind, t.relpersistence FROM pg_class r JOIN pg_class t ON t.oid = r.reltoastrelid WHERE r.relname ~ '^unlogged1'
-UNION ALL
-SELECT r.relname || ' toast index', ri.relkind, ri.relpersistence FROM pg_class r join pg_class t ON t.oid = r.reltoastrelid JOIN pg_index i ON i.indrelid = t.oid JOIN pg_class ri ON ri.oid = i.indexrelid WHERE r.relname ~ '^unlogged1'
-ORDER BY relname;
-        relname        | relkind | relpersistence 
------------------------+---------+----------------
- unlogged1             | r       | u
- unlogged1 toast index | i       | u
- unlogged1 toast table | t       | u
- unlogged1_f1_seq      | S       | u
- unlogged1_pkey        | i       | u
-(5 rows)
-
-CREATE UNLOGGED TABLE unlogged2(f1 SERIAL PRIMARY KEY, f2 INTEGER REFERENCES unlogged1); -- foreign key
-CREATE UNLOGGED TABLE unlogged3(f1 SERIAL PRIMARY KEY, f2 INTEGER REFERENCES unlogged3); -- self-referencing foreign key
-ALTER TABLE unlogged3 SET LOGGED; -- skip self-referencing foreign key
-ALTER TABLE unlogged2 SET LOGGED; -- fails because a foreign key to an unlogged table exists
-ERROR:  could not change table "unlogged2" to logged because it references unlogged table "unlogged1"
-ALTER TABLE unlogged1 SET LOGGED;
--- check relpersistence of an unlogged table after changing to permanent
-SELECT relname, relkind, relpersistence FROM pg_class WHERE relname ~ '^unlogged1'
-UNION ALL
-SELECT r.relname || ' toast table', t.relkind, t.relpersistence FROM pg_class r JOIN pg_class t ON t.oid = r.reltoastrelid WHERE r.relname ~ '^unlogged1'
-UNION ALL
-SELECT r.relname || ' toast index', ri.relkind, ri.relpersistence FROM pg_class r join pg_class t ON t.oid = r.reltoastrelid JOIN pg_index i ON i.indrelid = t.oid JOIN pg_class ri ON ri.oid = i.indexrelid WHERE r.relname ~ '^unlogged1'
-ORDER BY relname;
-        relname        | relkind | relpersistence 
------------------------+---------+----------------
- unlogged1             | r       | p
- unlogged1 toast index | i       | p
- unlogged1 toast table | t       | p
- unlogged1_f1_seq      | S       | p
- unlogged1_pkey        | i       | p
-(5 rows)
-
-ALTER TABLE unlogged1 SET LOGGED; -- silently do nothing
-DROP TABLE unlogged3;
-DROP TABLE unlogged2;
-DROP TABLE unlogged1;
--- set unlogged
-CREATE TABLE logged1(f1 SERIAL PRIMARY KEY, f2 TEXT); -- has sequence, toast
--- check relpersistence of a permanent table
-SELECT relname, relkind, relpersistence FROM pg_class WHERE relname ~ '^logged1'
-UNION ALL
-SELECT r.relname || ' toast table', t.relkind, t.relpersistence FROM pg_class r JOIN pg_class t ON t.oid = r.reltoastrelid WHERE r.relname ~ '^logged1'
-UNION ALL
-SELECT r.relname ||' toast index', ri.relkind, ri.relpersistence FROM pg_class r join pg_class t ON t.oid = r.reltoastrelid JOIN pg_index i ON i.indrelid = t.oid JOIN pg_class ri ON ri.oid = i.indexrelid WHERE r.relname ~ '^logged1'
-ORDER BY relname;
-       relname       | relkind | relpersistence 
----------------------+---------+----------------
- logged1             | r       | p
- logged1 toast index | i       | p
- logged1 toast table | t       | p
- logged1_f1_seq      | S       | p
- logged1_pkey        | i       | p
-(5 rows)
-
-CREATE TABLE logged2(f1 SERIAL PRIMARY KEY, f2 INTEGER REFERENCES logged1); -- foreign key
-CREATE TABLE logged3(f1 SERIAL PRIMARY KEY, f2 INTEGER REFERENCES logged3); -- self-referencing foreign key
-ALTER TABLE logged1 SET UNLOGGED; -- fails because a foreign key from a permanent table exists
-ERROR:  could not change table "logged1" to unlogged because it references logged table "logged2"
-ALTER TABLE logged3 SET UNLOGGED; -- skip self-referencing foreign key
-ALTER TABLE logged2 SET UNLOGGED;
-ALTER TABLE logged1 SET UNLOGGED;
--- check relpersistence of a permanent table after changing to unlogged
-SELECT relname, relkind, relpersistence FROM pg_class WHERE relname ~ '^logged1'
-UNION ALL
-SELECT r.relname || ' toast table', t.relkind, t.relpersistence FROM pg_class r JOIN pg_class t ON t.oid = r.reltoastrelid WHERE r.relname ~ '^logged1'
-UNION ALL
-SELECT r.relname || ' toast index', ri.relkind, ri.relpersistence FROM pg_class r join pg_class t ON t.oid = r.reltoastrelid JOIN pg_index i ON i.indrelid = t.oid JOIN pg_class ri ON ri.oid = i.indexrelid WHERE r.relname ~ '^logged1'
-ORDER BY relname;
-       relname       | relkind | relpersistence 
----------------------+---------+----------------
- logged1             | r       | u
- logged1 toast index | i       | u
- logged1 toast table | t       | u
- logged1_f1_seq      | S       | u
- logged1_pkey        | i       | u
-(5 rows)
-
-ALTER TABLE logged1 SET UNLOGGED; -- silently do nothing
-DROP TABLE logged3;
-DROP TABLE logged2;
-DROP TABLE logged1;
--- test ADD COLUMN IF NOT EXISTS
-CREATE TABLE test_add_column(c1 integer);
-\d test_add_column
-          Table "public.test_add_column"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- c1     | integer |           |          | 
-
-ALTER TABLE test_add_column
-	ADD COLUMN c2 integer;
-\d test_add_column
-          Table "public.test_add_column"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- c1     | integer |           |          | 
- c2     | integer |           |          | 
-
-ALTER TABLE test_add_column
-	ADD COLUMN c2 integer; -- fail because c2 already exists
-ERROR:  column "c2" of relation "test_add_column" already exists
-ALTER TABLE ONLY test_add_column
-	ADD COLUMN c2 integer; -- fail because c2 already exists
-ERROR:  column "c2" of relation "test_add_column" already exists
-\d test_add_column
-          Table "public.test_add_column"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- c1     | integer |           |          | 
- c2     | integer |           |          | 
-
-ALTER TABLE test_add_column
-	ADD COLUMN IF NOT EXISTS c2 integer; -- skipping because c2 already exists
-NOTICE:  column "c2" of relation "test_add_column" already exists, skipping
-ALTER TABLE ONLY test_add_column
-	ADD COLUMN IF NOT EXISTS c2 integer; -- skipping because c2 already exists
-NOTICE:  column "c2" of relation "test_add_column" already exists, skipping
-\d test_add_column
-          Table "public.test_add_column"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- c1     | integer |           |          | 
- c2     | integer |           |          | 
-
-ALTER TABLE test_add_column
-	ADD COLUMN c2 integer, -- fail because c2 already exists
-	ADD COLUMN c3 integer primary key;
-ERROR:  column "c2" of relation "test_add_column" already exists
-\d test_add_column
-          Table "public.test_add_column"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- c1     | integer |           |          | 
- c2     | integer |           |          | 
-
-ALTER TABLE test_add_column
-	ADD COLUMN IF NOT EXISTS c2 integer, -- skipping because c2 already exists
-	ADD COLUMN c3 integer primary key;
-NOTICE:  column "c2" of relation "test_add_column" already exists, skipping
-\d test_add_column
-          Table "public.test_add_column"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- c1     | integer |           |          | 
- c2     | integer |           |          | 
- c3     | integer |           | not null | 
-Indexes:
-    "test_add_column_pkey" PRIMARY KEY, btree (c3)
-
-ALTER TABLE test_add_column
-	ADD COLUMN IF NOT EXISTS c2 integer, -- skipping because c2 already exists
-	ADD COLUMN IF NOT EXISTS c3 integer primary key; -- skipping because c3 already exists
-NOTICE:  column "c2" of relation "test_add_column" already exists, skipping
-NOTICE:  column "c3" of relation "test_add_column" already exists, skipping
-\d test_add_column
-          Table "public.test_add_column"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- c1     | integer |           |          | 
- c2     | integer |           |          | 
- c3     | integer |           | not null | 
-Indexes:
-    "test_add_column_pkey" PRIMARY KEY, btree (c3)
-
-ALTER TABLE test_add_column
-	ADD COLUMN IF NOT EXISTS c2 integer, -- skipping because c2 already exists
-	ADD COLUMN IF NOT EXISTS c3 integer, -- skipping because c3 already exists
-	ADD COLUMN c4 integer REFERENCES test_add_column;
-NOTICE:  column "c2" of relation "test_add_column" already exists, skipping
-NOTICE:  column "c3" of relation "test_add_column" already exists, skipping
-\d test_add_column
-          Table "public.test_add_column"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- c1     | integer |           |          | 
- c2     | integer |           |          | 
- c3     | integer |           | not null | 
- c4     | integer |           |          | 
-Indexes:
-    "test_add_column_pkey" PRIMARY KEY, btree (c3)
-Foreign-key constraints:
-    "test_add_column_c4_fkey" FOREIGN KEY (c4) REFERENCES test_add_column(c3)
-Referenced by:
-    TABLE "test_add_column" CONSTRAINT "test_add_column_c4_fkey" FOREIGN KEY (c4) REFERENCES test_add_column(c3)
-
-ALTER TABLE test_add_column
-	ADD COLUMN IF NOT EXISTS c4 integer REFERENCES test_add_column;
-NOTICE:  column "c4" of relation "test_add_column" already exists, skipping
-\d test_add_column
-          Table "public.test_add_column"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- c1     | integer |           |          | 
- c2     | integer |           |          | 
- c3     | integer |           | not null | 
- c4     | integer |           |          | 
-Indexes:
-    "test_add_column_pkey" PRIMARY KEY, btree (c3)
-Foreign-key constraints:
-    "test_add_column_c4_fkey" FOREIGN KEY (c4) REFERENCES test_add_column(c3)
-Referenced by:
-    TABLE "test_add_column" CONSTRAINT "test_add_column_c4_fkey" FOREIGN KEY (c4) REFERENCES test_add_column(c3)
-
-ALTER TABLE test_add_column
-	ADD COLUMN IF NOT EXISTS c5 SERIAL CHECK (c5 > 8);
-\d test_add_column
-                            Table "public.test_add_column"
- Column |  Type   | Collation | Nullable |                   Default                   
---------+---------+-----------+----------+---------------------------------------------
- c1     | integer |           |          | 
- c2     | integer |           |          | 
- c3     | integer |           | not null | 
- c4     | integer |           |          | 
- c5     | integer |           | not null | nextval('test_add_column_c5_seq'::regclass)
-Indexes:
-    "test_add_column_pkey" PRIMARY KEY, btree (c3)
-Check constraints:
-    "test_add_column_c5_check" CHECK (c5 > 8)
-Foreign-key constraints:
-    "test_add_column_c4_fkey" FOREIGN KEY (c4) REFERENCES test_add_column(c3)
-Referenced by:
-    TABLE "test_add_column" CONSTRAINT "test_add_column_c4_fkey" FOREIGN KEY (c4) REFERENCES test_add_column(c3)
-
-ALTER TABLE test_add_column
-	ADD COLUMN IF NOT EXISTS c5 SERIAL CHECK (c5 > 10);
-NOTICE:  column "c5" of relation "test_add_column" already exists, skipping
-\d test_add_column*
-                            Table "public.test_add_column"
- Column |  Type   | Collation | Nullable |                   Default                   
---------+---------+-----------+----------+---------------------------------------------
- c1     | integer |           |          | 
- c2     | integer |           |          | 
- c3     | integer |           | not null | 
- c4     | integer |           |          | 
- c5     | integer |           | not null | nextval('test_add_column_c5_seq'::regclass)
-Indexes:
-    "test_add_column_pkey" PRIMARY KEY, btree (c3)
-Check constraints:
-    "test_add_column_c5_check" CHECK (c5 > 8)
-Foreign-key constraints:
-    "test_add_column_c4_fkey" FOREIGN KEY (c4) REFERENCES test_add_column(c3)
-Referenced by:
-    TABLE "test_add_column" CONSTRAINT "test_add_column_c4_fkey" FOREIGN KEY (c4) REFERENCES test_add_column(c3)
-
-               Sequence "public.test_add_column_c5_seq"
-  Type   | Start | Minimum |  Maximum   | Increment | Cycles? | Cache 
----------+-------+---------+------------+-----------+---------+-------
- integer |     1 |       1 | 2147483647 |         1 | no      |     1
-Owned by: public.test_add_column.c5
-
- Index "public.test_add_column_pkey"
- Column |  Type   | Key? | Definition 
---------+---------+------+------------
- c3     | integer | yes  | c3
-primary key, btree, for table "public.test_add_column"
-
-DROP TABLE test_add_column;
-\d test_add_column*
--- assorted cases with multiple ALTER TABLE steps
-CREATE TABLE ataddindex(f1 INT);
-INSERT INTO ataddindex VALUES (42), (43);
-CREATE UNIQUE INDEX ataddindexi0 ON ataddindex(f1);
-ALTER TABLE ataddindex
-  ADD PRIMARY KEY USING INDEX ataddindexi0,
-  ALTER f1 TYPE BIGINT;
-\d ataddindex
-            Table "public.ataddindex"
- Column |  Type  | Collation | Nullable | Default 
---------+--------+-----------+----------+---------
- f1     | bigint |           | not null | 
-Indexes:
-    "ataddindexi0" PRIMARY KEY, btree (f1)
-
-DROP TABLE ataddindex;
-CREATE TABLE ataddindex(f1 VARCHAR(10));
-INSERT INTO ataddindex(f1) VALUES ('foo'), ('a');
-ALTER TABLE ataddindex
-  ALTER f1 SET DATA TYPE TEXT,
-  ADD EXCLUDE ((f1 LIKE 'a') WITH =);
-\d ataddindex
-           Table "public.ataddindex"
- Column | Type | Collation | Nullable | Default 
---------+------+-----------+----------+---------
- f1     | text |           |          | 
-Indexes:
-    "ataddindex_expr_excl" EXCLUDE USING btree ((f1 ~~ 'a'::text) WITH =)
-
-DROP TABLE ataddindex;
-CREATE TABLE ataddindex(id int, ref_id int);
-ALTER TABLE ataddindex
-  ADD PRIMARY KEY (id),
-  ADD FOREIGN KEY (ref_id) REFERENCES ataddindex;
-\d ataddindex
-             Table "public.ataddindex"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- id     | integer |           | not null | 
- ref_id | integer |           |          | 
-Indexes:
-    "ataddindex_pkey" PRIMARY KEY, btree (id)
-Foreign-key constraints:
-    "ataddindex_ref_id_fkey" FOREIGN KEY (ref_id) REFERENCES ataddindex(id)
-Referenced by:
-    TABLE "ataddindex" CONSTRAINT "ataddindex_ref_id_fkey" FOREIGN KEY (ref_id) REFERENCES ataddindex(id)
-
-DROP TABLE ataddindex;
-CREATE TABLE ataddindex(id int, ref_id int);
-ALTER TABLE ataddindex
-  ADD UNIQUE (id),
-  ADD FOREIGN KEY (ref_id) REFERENCES ataddindex (id);
-\d ataddindex
-             Table "public.ataddindex"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- id     | integer |           |          | 
- ref_id | integer |           |          | 
-Indexes:
-    "ataddindex_id_key" UNIQUE CONSTRAINT, btree (id)
-Foreign-key constraints:
-    "ataddindex_ref_id_fkey" FOREIGN KEY (ref_id) REFERENCES ataddindex(id)
-Referenced by:
-    TABLE "ataddindex" CONSTRAINT "ataddindex_ref_id_fkey" FOREIGN KEY (ref_id) REFERENCES ataddindex(id)
-
-DROP TABLE ataddindex;
-CREATE TABLE atnotnull1 ();
-ALTER TABLE atnotnull1
-  ADD COLUMN a INT,
-  ALTER a SET NOT NULL;
-ALTER TABLE atnotnull1
-  ADD COLUMN c INT,
-  ADD PRIMARY KEY (c);
-\d+ atnotnull1
-                                Table "public.atnotnull1"
- Column |  Type   | Collation | Nullable | Default | Storage | Stats target | Description 
---------+---------+-----------+----------+---------+---------+--------------+-------------
- a      | integer |           | not null |         | plain   |              | 
- c      | integer |           | not null |         | plain   |              | 
-Indexes:
-    "atnotnull1_pkey" PRIMARY KEY, btree (c)
-
--- cannot drop column that is part of the partition key
-CREATE TABLE partitioned (
-	a int,
-	b int
-) PARTITION BY RANGE (a, (a+b+1));
-ALTER TABLE partitioned DROP COLUMN a;
-ERROR:  cannot drop column "a" because it is part of the partition key of relation "partitioned"
-ALTER TABLE partitioned ALTER COLUMN a TYPE char(5);
-ERROR:  cannot alter column "a" because it is part of the partition key of relation "partitioned"
-ALTER TABLE partitioned DROP COLUMN b;
-ERROR:  cannot drop column "b" because it is part of the partition key of relation "partitioned"
-ALTER TABLE partitioned ALTER COLUMN b TYPE char(5);
-ERROR:  cannot alter column "b" because it is part of the partition key of relation "partitioned"
--- specifying storage parameters for partitioned tables is not supported
-ALTER TABLE partitioned SET (fillfactor=100);
-ERROR:  cannot specify storage parameters for a partitioned table
-HINT:  Specify storage parameters for its leaf partitions instead.
--- partitioned table cannot participate in regular inheritance
-CREATE TABLE nonpartitioned (
-	a int,
-	b int
-);
-ALTER TABLE partitioned INHERIT nonpartitioned;
-ERROR:  cannot change inheritance of partitioned table
-ALTER TABLE nonpartitioned INHERIT partitioned;
-ERROR:  cannot inherit from partitioned table "partitioned"
--- cannot add NO INHERIT constraint to partitioned tables
-ALTER TABLE partitioned ADD CONSTRAINT chk_a CHECK (a > 0) NO INHERIT;
-ERROR:  cannot add NO INHERIT constraint to partitioned table "partitioned"
-DROP TABLE partitioned, nonpartitioned;
---
--- ATTACH PARTITION
---
--- check that target table is partitioned
-CREATE TABLE unparted (
-	a int
-);
-CREATE TABLE fail_part (like unparted);
-ALTER TABLE unparted ATTACH PARTITION fail_part FOR VALUES IN ('a');
-ERROR:  table "unparted" is not partitioned
-DROP TABLE unparted, fail_part;
--- check that partition bound is compatible
-CREATE TABLE list_parted (
-	a int NOT NULL,
-	b char(2) COLLATE "C",
-	CONSTRAINT check_a CHECK (a > 0)
-) PARTITION BY LIST (a);
-CREATE TABLE fail_part (LIKE list_parted);
-ALTER TABLE list_parted ATTACH PARTITION fail_part FOR VALUES FROM (1) TO (10);
-ERROR:  invalid bound specification for a list partition
-LINE 1: ...list_parted ATTACH PARTITION fail_part FOR VALUES FROM (1) T...
-                                                             ^
-DROP TABLE fail_part;
--- check that the table being attached exists
-ALTER TABLE list_parted ATTACH PARTITION nonexistent FOR VALUES IN (1);
-ERROR:  relation "nonexistent" does not exist
--- check ownership of the source table
-CREATE ROLE regress_test_me;
-CREATE ROLE regress_test_not_me;
-CREATE TABLE not_owned_by_me (LIKE list_parted);
-ALTER TABLE not_owned_by_me OWNER TO regress_test_not_me;
-SET SESSION AUTHORIZATION regress_test_me;
-CREATE TABLE owned_by_me (
-	a int
-) PARTITION BY LIST (a);
-ALTER TABLE owned_by_me ATTACH PARTITION not_owned_by_me FOR VALUES IN (1);
-ERROR:  must be owner of table not_owned_by_me
-RESET SESSION AUTHORIZATION;
-DROP TABLE owned_by_me, not_owned_by_me;
-DROP ROLE regress_test_not_me;
-DROP ROLE regress_test_me;
--- check that the table being attached is not part of regular inheritance
-CREATE TABLE parent (LIKE list_parted);
-CREATE TABLE child () INHERITS (parent);
-ALTER TABLE list_parted ATTACH PARTITION child FOR VALUES IN (1);
-ERROR:  cannot attach inheritance child as partition
-ALTER TABLE list_parted ATTACH PARTITION parent FOR VALUES IN (1);
-ERROR:  cannot attach inheritance parent as partition
-DROP TABLE child;
--- now it should work, with a little tweak
-ALTER TABLE parent ADD CONSTRAINT check_a CHECK (a > 0);
-ALTER TABLE list_parted ATTACH PARTITION parent FOR VALUES IN (1);
--- test insert/update, per bug #18550
-INSERT INTO parent VALUES (1);
-UPDATE parent SET a = 2 WHERE a = 1;
-ERROR:  new row for relation "parent" violates partition constraint
-DETAIL:  Failing row contains (2, null).
-DROP TABLE parent CASCADE;
--- check any TEMP-ness
-CREATE TEMP TABLE temp_parted (a int) PARTITION BY LIST (a);
-CREATE TABLE perm_part (a int);
-ALTER TABLE temp_parted ATTACH PARTITION perm_part FOR VALUES IN (1);
-ERROR:  cannot attach a permanent relation as partition of temporary relation "temp_parted"
-DROP TABLE temp_parted, perm_part;
--- check that the table being attached is not a typed table
-CREATE TYPE mytype AS (a int);
-CREATE TABLE fail_part OF mytype;
-ALTER TABLE list_parted ATTACH PARTITION fail_part FOR VALUES IN (1);
-ERROR:  cannot attach a typed table as partition
-DROP TYPE mytype CASCADE;
-NOTICE:  drop cascades to table fail_part
--- check that the table being attached has only columns present in the parent
-CREATE TABLE fail_part (like list_parted, c int);
-ALTER TABLE list_parted ATTACH PARTITION fail_part FOR VALUES IN (1);
-ERROR:  table "fail_part" contains column "c" not found in parent "list_parted"
-DETAIL:  The new partition may contain only the columns present in parent.
-DROP TABLE fail_part;
--- check that the table being attached has every column of the parent
-CREATE TABLE fail_part (a int NOT NULL);
-ALTER TABLE list_parted ATTACH PARTITION fail_part FOR VALUES IN (1);
-ERROR:  child table is missing column "b"
-DROP TABLE fail_part;
--- check that columns match in type, collation and NOT NULL status
-CREATE TABLE fail_part (
-	b char(3),
-	a int NOT NULL
-);
-ALTER TABLE list_parted ATTACH PARTITION fail_part FOR VALUES IN (1);
-ERROR:  child table "fail_part" has different type for column "b"
-ALTER TABLE fail_part ALTER b TYPE char (2) COLLATE "POSIX";
-ALTER TABLE list_parted ATTACH PARTITION fail_part FOR VALUES IN (1);
-ERROR:  child table "fail_part" has different collation for column "b"
-DROP TABLE fail_part;
--- check that the table being attached has all constraints of the parent
-CREATE TABLE fail_part (
-	b char(2) COLLATE "C",
-	a int NOT NULL
-);
-ALTER TABLE list_parted ATTACH PARTITION fail_part FOR VALUES IN (1);
-ERROR:  child table is missing constraint "check_a"
--- check that the constraint matches in definition with parent's constraint
-ALTER TABLE fail_part ADD CONSTRAINT check_a CHECK (a >= 0);
-ALTER TABLE list_parted ATTACH PARTITION fail_part FOR VALUES IN (1);
-ERROR:  child table "fail_part" has different definition for check constraint "check_a"
-DROP TABLE fail_part;
--- check the attributes and constraints after partition is attached
-CREATE TABLE part_1 (
-	a int NOT NULL,
-	b char(2) COLLATE "C",
-	CONSTRAINT check_a CHECK (a > 0)
-);
-ALTER TABLE list_parted ATTACH PARTITION part_1 FOR VALUES IN (1);
--- attislocal and conislocal are always false for merged attributes and constraints respectively.
-SELECT attislocal, attinhcount FROM pg_attribute WHERE attrelid = 'part_1'::regclass AND attnum > 0;
- attislocal | attinhcount 
-------------+-------------
- f          |           1
- f          |           1
-(2 rows)
-
-SELECT conislocal, coninhcount FROM pg_constraint WHERE conrelid = 'part_1'::regclass AND conname = 'check_a';
- conislocal | coninhcount 
-------------+-------------
- f          |           1
-(1 row)
-
--- check that the new partition won't overlap with an existing partition
-CREATE TABLE fail_part (LIKE part_1 INCLUDING CONSTRAINTS);
-ALTER TABLE list_parted ATTACH PARTITION fail_part FOR VALUES IN (1);
-ERROR:  partition "fail_part" would overlap partition "part_1"
-LINE 1: ...LE list_parted ATTACH PARTITION fail_part FOR VALUES IN (1);
-                                                                    ^
-DROP TABLE fail_part;
--- check that an existing table can be attached as a default partition
-CREATE TABLE def_part (LIKE list_parted INCLUDING CONSTRAINTS);
-ALTER TABLE list_parted ATTACH PARTITION def_part DEFAULT;
--- check attaching default partition fails if a default partition already
--- exists
-CREATE TABLE fail_def_part (LIKE part_1 INCLUDING CONSTRAINTS);
-ALTER TABLE list_parted ATTACH PARTITION fail_def_part DEFAULT;
-ERROR:  partition "fail_def_part" conflicts with existing default partition "def_part"
-LINE 1: ...ER TABLE list_parted ATTACH PARTITION fail_def_part DEFAULT;
-                                                               ^
--- check validation when attaching list partitions
-CREATE TABLE list_parted2 (
-	a int,
-	b char
-) PARTITION BY LIST (a);
--- check that violating rows are correctly reported
-CREATE TABLE part_2 (LIKE list_parted2);
-INSERT INTO part_2 VALUES (3, 'a');
-ALTER TABLE list_parted2 ATTACH PARTITION part_2 FOR VALUES IN (2);
-ERROR:  partition constraint of relation "part_2" is violated by some row
--- should be ok after deleting the bad row
-DELETE FROM part_2;
-ALTER TABLE list_parted2 ATTACH PARTITION part_2 FOR VALUES IN (2);
--- check partition cannot be attached if default has some row for its values
-CREATE TABLE list_parted2_def PARTITION OF list_parted2 DEFAULT;
-INSERT INTO list_parted2_def VALUES (11, 'z');
-CREATE TABLE part_3 (LIKE list_parted2);
-ALTER TABLE list_parted2 ATTACH PARTITION part_3 FOR VALUES IN (11);
-ERROR:  updated partition constraint for default partition "list_parted2_def" would be violated by some row
--- should be ok after deleting the bad row
-DELETE FROM list_parted2_def WHERE a = 11;
-ALTER TABLE list_parted2 ATTACH PARTITION part_3 FOR VALUES IN (11);
--- adding constraints that describe the desired partition constraint
--- (or more restrictive) will help skip the validation scan
-CREATE TABLE part_3_4 (
-	LIKE list_parted2,
-	CONSTRAINT check_a CHECK (a IN (3))
-);
--- however, if a list partition does not accept nulls, there should be
--- an explicit NOT NULL constraint on the partition key column for the
--- validation scan to be skipped;
-ALTER TABLE list_parted2 ATTACH PARTITION part_3_4 FOR VALUES IN (3, 4);
--- adding a NOT NULL constraint will cause the scan to be skipped
-ALTER TABLE list_parted2 DETACH PARTITION part_3_4;
-ALTER TABLE part_3_4 ALTER a SET NOT NULL;
-ALTER TABLE list_parted2 ATTACH PARTITION part_3_4 FOR VALUES IN (3, 4);
--- check if default partition scan skipped
-ALTER TABLE list_parted2_def ADD CONSTRAINT check_a CHECK (a IN (5, 6));
-CREATE TABLE part_55_66 PARTITION OF list_parted2 FOR VALUES IN (55, 66);
--- check validation when attaching range partitions
-CREATE TABLE range_parted (
-	a int,
-	b int
-) PARTITION BY RANGE (a, b);
--- check that violating rows are correctly reported
-CREATE TABLE part1 (
-	a int NOT NULL CHECK (a = 1),
-	b int NOT NULL CHECK (b >= 1 AND b <= 10)
-);
-INSERT INTO part1 VALUES (1, 10);
--- Remember the TO bound is exclusive
-ALTER TABLE range_parted ATTACH PARTITION part1 FOR VALUES FROM (1, 1) TO (1, 10);
-ERROR:  partition constraint of relation "part1" is violated by some row
--- should be ok after deleting the bad row
-DELETE FROM part1;
-ALTER TABLE range_parted ATTACH PARTITION part1 FOR VALUES FROM (1, 1) TO (1, 10);
--- adding constraints that describe the desired partition constraint
--- (or more restrictive) will help skip the validation scan
-CREATE TABLE part2 (
-	a int NOT NULL CHECK (a = 1),
-	b int NOT NULL CHECK (b >= 10 AND b < 18)
-);
-ALTER TABLE range_parted ATTACH PARTITION part2 FOR VALUES FROM (1, 10) TO (1, 20);
--- Create default partition
-CREATE TABLE partr_def1 PARTITION OF range_parted DEFAULT;
--- Only one default partition is allowed, hence, following should give error
-CREATE TABLE partr_def2 (LIKE part1 INCLUDING CONSTRAINTS);
-ALTER TABLE range_parted ATTACH PARTITION partr_def2 DEFAULT;
-ERROR:  partition "partr_def2" conflicts with existing default partition "partr_def1"
-LINE 1: ...LTER TABLE range_parted ATTACH PARTITION partr_def2 DEFAULT;
-                                                               ^
--- Overlapping partitions cannot be attached, hence, following should give error
-INSERT INTO partr_def1 VALUES (2, 10);
-CREATE TABLE part3 (LIKE range_parted);
-ALTER TABLE range_parted ATTACH partition part3 FOR VALUES FROM (2, 10) TO (2, 20);
-ERROR:  updated partition constraint for default partition "partr_def1" would be violated by some row
--- Attaching partitions should be successful when there are no overlapping rows
-ALTER TABLE range_parted ATTACH partition part3 FOR VALUES FROM (3, 10) TO (3, 20);
--- check that leaf partitions are scanned when attaching a partitioned
--- table
-CREATE TABLE part_5 (
-	LIKE list_parted2
-) PARTITION BY LIST (b);
--- check that violating rows are correctly reported
-CREATE TABLE part_5_a PARTITION OF part_5 FOR VALUES IN ('a');
-INSERT INTO part_5_a (a, b) VALUES (6, 'a');
-ALTER TABLE list_parted2 ATTACH PARTITION part_5 FOR VALUES IN (5);
-ERROR:  partition constraint of relation "part_5_a" is violated by some row
--- delete the faulting row and also add a constraint to skip the scan
-DELETE FROM part_5_a WHERE a NOT IN (3);
-ALTER TABLE part_5 ADD CONSTRAINT check_a CHECK (a IS NOT NULL AND a = 5);
-ALTER TABLE list_parted2 ATTACH PARTITION part_5 FOR VALUES IN (5);
-ALTER TABLE list_parted2 DETACH PARTITION part_5;
-ALTER TABLE part_5 DROP CONSTRAINT check_a;
--- scan should again be skipped, even though NOT NULL is now a column property
-ALTER TABLE part_5 ADD CONSTRAINT check_a CHECK (a IN (5)), ALTER a SET NOT NULL;
-ALTER TABLE list_parted2 ATTACH PARTITION part_5 FOR VALUES IN (5);
--- Check the case where attnos of the partitioning columns in the table being
--- attached differs from the parent.  It should not affect the constraint-
--- checking logic that allows to skip the scan.
-CREATE TABLE part_6 (
-	c int,
-	LIKE list_parted2,
-	CONSTRAINT check_a CHECK (a IS NOT NULL AND a = 6)
-);
-ALTER TABLE part_6 DROP c;
-ALTER TABLE list_parted2 ATTACH PARTITION part_6 FOR VALUES IN (6);
--- Similar to above, but the table being attached is a partitioned table
--- whose partition has still different attnos for the root partitioning
--- columns.
-CREATE TABLE part_7 (
-	LIKE list_parted2,
-	CONSTRAINT check_a CHECK (a IS NOT NULL AND a = 7)
-) PARTITION BY LIST (b);
-CREATE TABLE part_7_a_null (
-	c int,
-	d int,
-	e int,
-	LIKE list_parted2,  -- 'a' will have attnum = 4
-	CONSTRAINT check_b CHECK (b IS NULL OR b = 'a'),
-	CONSTRAINT check_a CHECK (a IS NOT NULL AND a = 7)
-);
-ALTER TABLE part_7_a_null DROP c, DROP d, DROP e;
-ALTER TABLE part_7 ATTACH PARTITION part_7_a_null FOR VALUES IN ('a', null);
-ALTER TABLE list_parted2 ATTACH PARTITION part_7 FOR VALUES IN (7);
--- Same example, but check this time that the constraint correctly detects
--- violating rows
-ALTER TABLE list_parted2 DETACH PARTITION part_7;
-ALTER TABLE part_7 DROP CONSTRAINT check_a; -- thusly, scan won't be skipped
-INSERT INTO part_7 (a, b) VALUES (8, null), (9, 'a');
-SELECT tableoid::regclass, a, b FROM part_7 order by a;
-   tableoid    | a | b 
----------------+---+---
- part_7_a_null | 8 | 
- part_7_a_null | 9 | a
-(2 rows)
-
-ALTER TABLE list_parted2 ATTACH PARTITION part_7 FOR VALUES IN (7);
-ERROR:  partition constraint of relation "part_7_a_null" is violated by some row
--- check that leaf partitions of default partition are scanned when
--- attaching a partitioned table.
-ALTER TABLE part_5 DROP CONSTRAINT check_a;
-CREATE TABLE part5_def PARTITION OF part_5 DEFAULT PARTITION BY LIST(a);
-CREATE TABLE part5_def_p1 PARTITION OF part5_def FOR VALUES IN (5);
-INSERT INTO part5_def_p1 VALUES (5, 'y');
-CREATE TABLE part5_p1 (LIKE part_5);
-ALTER TABLE part_5 ATTACH PARTITION part5_p1 FOR VALUES IN ('y');
-ERROR:  updated partition constraint for default partition "part5_def_p1" would be violated by some row
--- should be ok after deleting the bad row
-DELETE FROM part5_def_p1 WHERE b = 'y';
-ALTER TABLE part_5 ATTACH PARTITION part5_p1 FOR VALUES IN ('y');
--- check that the table being attached is not already a partition
-ALTER TABLE list_parted2 ATTACH PARTITION part_2 FOR VALUES IN (2);
-ERROR:  "part_2" is already a partition
--- check that circular inheritance is not allowed
-ALTER TABLE part_5 ATTACH PARTITION list_parted2 FOR VALUES IN ('b');
-ERROR:  circular inheritance not allowed
-DETAIL:  "part_5" is already a child of "list_parted2".
-ALTER TABLE list_parted2 ATTACH PARTITION list_parted2 FOR VALUES IN (0);
-ERROR:  circular inheritance not allowed
-DETAIL:  "list_parted2" is already a child of "list_parted2".
--- If a partitioned table being created or an existing table being attached
--- as a partition does not have a constraint that would allow validation scan
--- to be skipped, but an individual partition does, then the partition's
--- validation scan is skipped.
-CREATE TABLE quuux (a int, b text) PARTITION BY LIST (a);
-CREATE TABLE quuux_default PARTITION OF quuux DEFAULT PARTITION BY LIST (b);
-CREATE TABLE quuux_default1 PARTITION OF quuux_default (
-	CONSTRAINT check_1 CHECK (a IS NOT NULL AND a = 1)
-) FOR VALUES IN ('b');
-CREATE TABLE quuux1 (a int, b text);
-ALTER TABLE quuux ATTACH PARTITION quuux1 FOR VALUES IN (1); -- validate!
-CREATE TABLE quuux2 (a int, b text);
-ALTER TABLE quuux ATTACH PARTITION quuux2 FOR VALUES IN (2); -- skip validation
-DROP TABLE quuux1, quuux2;
--- should validate for quuux1, but not for quuux2
-CREATE TABLE quuux1 PARTITION OF quuux FOR VALUES IN (1);
-CREATE TABLE quuux2 PARTITION OF quuux FOR VALUES IN (2);
-DROP TABLE quuux;
--- check validation when attaching hash partitions
--- Use hand-rolled hash functions and operator class to get predictable result
--- on different machines. part_test_int4_ops is defined in test_setup.sql.
--- check that the new partition won't overlap with an existing partition
-CREATE TABLE hash_parted (
-	a int,
-	b int
-) PARTITION BY HASH (a part_test_int4_ops);
-CREATE TABLE hpart_1 PARTITION OF hash_parted FOR VALUES WITH (MODULUS 4, REMAINDER 0);
-CREATE TABLE fail_part (LIKE hpart_1);
-ALTER TABLE hash_parted ATTACH PARTITION fail_part FOR VALUES WITH (MODULUS 8, REMAINDER 4);
-ERROR:  partition "fail_part" would overlap partition "hpart_1"
-LINE 1: ...hash_parted ATTACH PARTITION fail_part FOR VALUES WITH (MODU...
-                                                             ^
-ALTER TABLE hash_parted ATTACH PARTITION fail_part FOR VALUES WITH (MODULUS 8, REMAINDER 0);
-ERROR:  partition "fail_part" would overlap partition "hpart_1"
-LINE 1: ...hash_parted ATTACH PARTITION fail_part FOR VALUES WITH (MODU...
-                                                             ^
-DROP TABLE fail_part;
--- check validation when attaching hash partitions
--- check that violating rows are correctly reported
-CREATE TABLE hpart_2 (LIKE hash_parted);
-INSERT INTO hpart_2 VALUES (3, 0);
-ALTER TABLE hash_parted ATTACH PARTITION hpart_2 FOR VALUES WITH (MODULUS 4, REMAINDER 1);
-ERROR:  partition constraint of relation "hpart_2" is violated by some row
--- should be ok after deleting the bad row
-DELETE FROM hpart_2;
-ALTER TABLE hash_parted ATTACH PARTITION hpart_2 FOR VALUES WITH (MODULUS 4, REMAINDER 1);
--- check that leaf partitions are scanned when attaching a partitioned
--- table
-CREATE TABLE hpart_5 (
-	LIKE hash_parted
-) PARTITION BY LIST (b);
--- check that violating rows are correctly reported
-CREATE TABLE hpart_5_a PARTITION OF hpart_5 FOR VALUES IN ('1', '2', '3');
-INSERT INTO hpart_5_a (a, b) VALUES (7, 1);
-ALTER TABLE hash_parted ATTACH PARTITION hpart_5 FOR VALUES WITH (MODULUS 4, REMAINDER 2);
-ERROR:  partition constraint of relation "hpart_5_a" is violated by some row
--- should be ok after deleting the bad row
-DELETE FROM hpart_5_a;
-ALTER TABLE hash_parted ATTACH PARTITION hpart_5 FOR VALUES WITH (MODULUS 4, REMAINDER 2);
--- check that the table being attach is with valid modulus and remainder value
-CREATE TABLE fail_part(LIKE hash_parted);
-ALTER TABLE hash_parted ATTACH PARTITION fail_part FOR VALUES WITH (MODULUS 0, REMAINDER 1);
-ERROR:  modulus for hash partition must be an integer value greater than zero
-ALTER TABLE hash_parted ATTACH PARTITION fail_part FOR VALUES WITH (MODULUS 8, REMAINDER 8);
-ERROR:  remainder for hash partition must be less than modulus
-ALTER TABLE hash_parted ATTACH PARTITION fail_part FOR VALUES WITH (MODULUS 3, REMAINDER 2);
-ERROR:  every hash partition modulus must be a factor of the next larger modulus
-DETAIL:  The new modulus 3 is not a factor of 4, the modulus of existing partition "hpart_1".
-DROP TABLE fail_part;
---
--- DETACH PARTITION
---
--- check that the table is partitioned at all
-CREATE TABLE regular_table (a int);
-ALTER TABLE regular_table DETACH PARTITION any_name;
-ERROR:  table "regular_table" is not partitioned
-DROP TABLE regular_table;
--- check that the partition being detached exists at all
-ALTER TABLE list_parted2 DETACH PARTITION part_4;
-ERROR:  relation "part_4" does not exist
-ALTER TABLE hash_parted DETACH PARTITION hpart_4;
-ERROR:  relation "hpart_4" does not exist
--- check that the partition being detached is actually a partition of the parent
-CREATE TABLE not_a_part (a int);
-ALTER TABLE list_parted2 DETACH PARTITION not_a_part;
-ERROR:  relation "not_a_part" is not a partition of relation "list_parted2"
-ALTER TABLE list_parted2 DETACH PARTITION part_1;
-ERROR:  relation "part_1" is not a partition of relation "list_parted2"
-ALTER TABLE hash_parted DETACH PARTITION not_a_part;
-ERROR:  relation "not_a_part" is not a partition of relation "hash_parted"
-DROP TABLE not_a_part;
--- check that, after being detached, attinhcount/coninhcount is dropped to 0 and
--- attislocal/conislocal is set to true
-ALTER TABLE list_parted2 DETACH PARTITION part_3_4;
-SELECT attinhcount, attislocal FROM pg_attribute WHERE attrelid = 'part_3_4'::regclass AND attnum > 0;
- attinhcount | attislocal 
--------------+------------
-           0 | t
-           0 | t
-(2 rows)
-
-SELECT coninhcount, conislocal FROM pg_constraint WHERE conrelid = 'part_3_4'::regclass AND conname = 'check_a';
- coninhcount | conislocal 
--------------+------------
-           0 | t
-(1 row)
-
-DROP TABLE part_3_4;
--- check that a detached partition is not dropped on dropping a partitioned table
-CREATE TABLE range_parted2 (
-    a int
-) PARTITION BY RANGE(a);
-CREATE TABLE part_rp PARTITION OF range_parted2 FOR VALUES FROM (0) to (100);
-ALTER TABLE range_parted2 DETACH PARTITION part_rp;
-DROP TABLE range_parted2;
-SELECT * from part_rp;
- a 
----
-(0 rows)
-
-DROP TABLE part_rp;
--- concurrent detach
-CREATE TABLE range_parted2 (
-	a int
-) PARTITION BY RANGE(a);
-CREATE TABLE part_rp PARTITION OF range_parted2 FOR VALUES FROM (0) to (100);
-BEGIN;
--- doesn't work in a partition block
-ALTER TABLE range_parted2 DETACH PARTITION part_rp CONCURRENTLY;
-ERROR:  ALTER TABLE ... DETACH CONCURRENTLY cannot run inside a transaction block
-COMMIT;
-CREATE TABLE part_rpd PARTITION OF range_parted2 DEFAULT;
--- doesn't work if there's a default partition
-ALTER TABLE range_parted2 DETACH PARTITION part_rp CONCURRENTLY;
-ERROR:  cannot detach partitions concurrently when a default partition exists
--- doesn't work for the default partition
-ALTER TABLE range_parted2 DETACH PARTITION part_rpd CONCURRENTLY;
-ERROR:  cannot detach partitions concurrently when a default partition exists
-DROP TABLE part_rpd;
--- works fine
-ALTER TABLE range_parted2 DETACH PARTITION part_rp CONCURRENTLY;
-\d+ range_parted2
-                         Partitioned table "public.range_parted2"
- Column |  Type   | Collation | Nullable | Default | Storage | Stats target | Description 
---------+---------+-----------+----------+---------+---------+--------------+-------------
- a      | integer |           |          |         | plain   |              | 
-Partition key: RANGE (a)
-Number of partitions: 0
-
--- constraint should be created
-\d part_rp
-              Table "public.part_rp"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           |          | 
-Check constraints:
-    "part_rp_a_check" CHECK (a IS NOT NULL AND a >= 0 AND a < 100)
-
-CREATE TABLE part_rp100 PARTITION OF range_parted2 (CHECK (a>=123 AND a<133 AND a IS NOT NULL)) FOR VALUES FROM (100) to (200);
-ALTER TABLE range_parted2 DETACH PARTITION part_rp100 CONCURRENTLY;
--- redundant constraint should not be created
-\d part_rp100
-             Table "public.part_rp100"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           |          | 
-Check constraints:
-    "part_rp100_a_check" CHECK (a >= 123 AND a < 133 AND a IS NOT NULL)
-
-DROP TABLE range_parted2;
--- Check ALTER TABLE commands for partitioned tables and partitions
--- cannot add/drop column to/from *only* the parent
-ALTER TABLE ONLY list_parted2 ADD COLUMN c int;
-ERROR:  column must be added to child tables too
-ALTER TABLE ONLY list_parted2 DROP COLUMN b;
-ERROR:  cannot drop column from only the partitioned table when partitions exist
-HINT:  Do not specify the ONLY keyword.
--- cannot add a column to partition or drop an inherited one
-ALTER TABLE part_2 ADD COLUMN c text;
-ERROR:  cannot add column to a partition
-ALTER TABLE part_2 DROP COLUMN b;
-ERROR:  cannot drop inherited column "b"
--- Nor rename, alter type
-ALTER TABLE part_2 RENAME COLUMN b to c;
-ERROR:  cannot rename inherited column "b"
-ALTER TABLE part_2 ALTER COLUMN b TYPE text;
-ERROR:  cannot alter inherited column "b"
--- cannot add/drop NOT NULL or check constraints to *only* the parent, when
--- partitions exist
-ALTER TABLE ONLY list_parted2 ALTER b SET NOT NULL;
-ERROR:  constraint must be added to child tables too
-DETAIL:  Column "b" of relation "part_2" is not already NOT NULL.
-HINT:  Do not specify the ONLY keyword.
-ALTER TABLE ONLY list_parted2 ADD CONSTRAINT check_b CHECK (b <> 'zz');
-ERROR:  constraint must be added to child tables too
-ALTER TABLE list_parted2 ALTER b SET NOT NULL;
-ALTER TABLE ONLY list_parted2 ALTER b DROP NOT NULL;
-ERROR:  cannot remove constraint from only the partitioned table when partitions exist
-HINT:  Do not specify the ONLY keyword.
-ALTER TABLE list_parted2 ADD CONSTRAINT check_b CHECK (b <> 'zz');
-ALTER TABLE ONLY list_parted2 DROP CONSTRAINT check_b;
-ERROR:  cannot remove constraint from only the partitioned table when partitions exist
-HINT:  Do not specify the ONLY keyword.
--- It's alright though, if no partitions are yet created
-CREATE TABLE parted_no_parts (a int) PARTITION BY LIST (a);
-ALTER TABLE ONLY parted_no_parts ALTER a SET NOT NULL;
-ALTER TABLE ONLY parted_no_parts ADD CONSTRAINT check_a CHECK (a > 0);
-ALTER TABLE ONLY parted_no_parts ALTER a DROP NOT NULL;
-ALTER TABLE ONLY parted_no_parts DROP CONSTRAINT check_a;
-DROP TABLE parted_no_parts;
--- cannot drop inherited NOT NULL or check constraints from partition
-ALTER TABLE list_parted2 ALTER b SET NOT NULL, ADD CONSTRAINT check_a2 CHECK (a > 0);
-ALTER TABLE part_2 ALTER b DROP NOT NULL;
-ERROR:  column "b" is marked NOT NULL in parent table
-ALTER TABLE part_2 DROP CONSTRAINT check_a2;
-ERROR:  cannot drop inherited constraint "check_a2" of relation "part_2"
--- Doesn't make sense to add NO INHERIT constraints on partitioned tables
-ALTER TABLE list_parted2 add constraint check_b2 check (b <> 'zz') NO INHERIT;
-ERROR:  cannot add NO INHERIT constraint to partitioned table "list_parted2"
--- check that a partition cannot participate in regular inheritance
-CREATE TABLE inh_test () INHERITS (part_2);
-ERROR:  cannot inherit from partition "part_2"
-CREATE TABLE inh_test (LIKE part_2);
-ALTER TABLE inh_test INHERIT part_2;
-ERROR:  cannot inherit from a partition
-ALTER TABLE part_2 INHERIT inh_test;
-ERROR:  cannot change inheritance of a partition
--- cannot drop or alter type of partition key columns of lower level
--- partitioned tables; for example, part_5, which is list_parted2's
--- partition, is partitioned on b;
-ALTER TABLE list_parted2 DROP COLUMN b;
-ERROR:  cannot drop column "b" because it is part of the partition key of relation "part_5"
-ALTER TABLE list_parted2 ALTER COLUMN b TYPE text;
-ERROR:  cannot alter column "b" because it is part of the partition key of relation "part_5"
--- dropping non-partition key columns should be allowed on the parent table.
-ALTER TABLE list_parted DROP COLUMN b;
-SELECT * FROM list_parted;
- a 
----
-(0 rows)
-
--- cleanup
-DROP TABLE list_parted, list_parted2, range_parted;
-DROP TABLE fail_def_part;
-DROP TABLE hash_parted;
--- more tests for certain multi-level partitioning scenarios
-create table p (a int, b int) partition by range (a, b);
-create table p1 (b int, a int not null) partition by range (b);
-create table p11 (like p1);
-alter table p11 drop a;
-alter table p11 add a int;
-alter table p11 drop a;
-alter table p11 add a int not null;
--- attnum for key attribute 'a' is different in p, p1, and p11
-select attrelid::regclass, attname, attnum
-from pg_attribute
-where attname = 'a'
- and (attrelid = 'p'::regclass
-   or attrelid = 'p1'::regclass
-   or attrelid = 'p11'::regclass)
-order by attrelid::regclass::text;
- attrelid | attname | attnum 
-----------+---------+--------
- p        | a       |      1
- p1       | a       |      2
- p11      | a       |      4
-(3 rows)
-
-alter table p1 attach partition p11 for values from (2) to (5);
-insert into p1 (a, b) values (2, 3);
--- check that partition validation scan correctly detects violating rows
-alter table p attach partition p1 for values from (1, 2) to (1, 10);
-ERROR:  partition constraint of relation "p11" is violated by some row
--- cleanup
-drop table p;
-drop table p1;
--- validate constraint on partitioned tables should only scan leaf partitions
-create table parted_validate_test (a int) partition by list (a);
-create table parted_validate_test_1 partition of parted_validate_test for values in (0, 1);
-alter table parted_validate_test add constraint parted_validate_test_chka check (a > 0) not valid;
-alter table parted_validate_test validate constraint parted_validate_test_chka;
-drop table parted_validate_test;
--- test alter column options
-CREATE TABLE attmp(i integer);
-INSERT INTO attmp VALUES (1);
-ALTER TABLE attmp ALTER COLUMN i SET (n_distinct = 1, n_distinct_inherited = 2);
-ALTER TABLE attmp ALTER COLUMN i RESET (n_distinct_inherited);
-ANALYZE attmp;
-DROP TABLE attmp;
-DROP USER regress_alter_table_user1;
--- check that violating rows are correctly reported when attaching as the
--- default partition
-create table defpart_attach_test (a int) partition by list (a);
-create table defpart_attach_test1 partition of defpart_attach_test for values in (1);
-create table defpart_attach_test_d (b int, a int);
-alter table defpart_attach_test_d drop b;
-insert into defpart_attach_test_d values (1), (2);
--- error because its constraint as the default partition would be violated
--- by the row containing 1
-alter table defpart_attach_test attach partition defpart_attach_test_d default;
-ERROR:  partition constraint of relation "defpart_attach_test_d" is violated by some row
-delete from defpart_attach_test_d where a = 1;
-alter table defpart_attach_test_d add check (a > 1);
--- should be attached successfully and without needing to be scanned
-alter table defpart_attach_test attach partition defpart_attach_test_d default;
--- check that attaching a partition correctly reports any rows in the default
--- partition that should not be there for the new partition to be attached
--- successfully
-create table defpart_attach_test_2 (like defpart_attach_test_d);
-alter table defpart_attach_test attach partition defpart_attach_test_2 for values in (2);
-ERROR:  updated partition constraint for default partition "defpart_attach_test_d" would be violated by some row
-drop table defpart_attach_test;
--- check combinations of temporary and permanent relations when attaching
--- partitions.
-create table perm_part_parent (a int) partition by list (a);
-create temp table temp_part_parent (a int) partition by list (a);
-create table perm_part_child (a int);
-create temp table temp_part_child (a int);
-alter table temp_part_parent attach partition perm_part_child default; -- error
-ERROR:  cannot attach a permanent relation as partition of temporary relation "temp_part_parent"
-alter table perm_part_parent attach partition temp_part_child default; -- error
-ERROR:  cannot attach a temporary relation as partition of permanent relation "perm_part_parent"
-alter table temp_part_parent attach partition temp_part_child default; -- ok
-drop table perm_part_parent cascade;
-drop table temp_part_parent cascade;
--- check that attaching partitions to a table while it is being used is
--- prevented
-create table tab_part_attach (a int) partition by list (a);
-create or replace function func_part_attach() returns trigger
-  language plpgsql as $$
-  begin
-    execute 'create table tab_part_attach_1 (a int)';
-    execute 'alter table tab_part_attach attach partition tab_part_attach_1 for values in (1)';
-    return null;
-  end $$;
-create trigger trig_part_attach before insert on tab_part_attach
-  for each statement execute procedure func_part_attach();
-insert into tab_part_attach values (1);
-ERROR:  cannot ALTER TABLE "tab_part_attach" because it is being used by active queries in this session
-CONTEXT:  SQL statement "alter table tab_part_attach attach partition tab_part_attach_1 for values in (1)"
-PL/pgSQL function func_part_attach() line 4 at EXECUTE
-drop table tab_part_attach;
-drop function func_part_attach();
--- test case where the partitioning operator is a SQL function whose
--- evaluation results in the table's relcache being rebuilt partway through
--- the execution of an ATTACH PARTITION command
-create function at_test_sql_partop (int4, int4) returns int language sql
-as $$ select case when $1 = $2 then 0 when $1 > $2 then 1 else -1 end; $$;
-create operator class at_test_sql_partop for type int4 using btree as
-    operator 1 < (int4, int4), operator 2 <= (int4, int4),
-    operator 3 = (int4, int4), operator 4 >= (int4, int4),
-    operator 5 > (int4, int4), function 1 at_test_sql_partop(int4, int4);
-create table at_test_sql_partop (a int) partition by range (a at_test_sql_partop);
-create table at_test_sql_partop_1 (a int);
-alter table at_test_sql_partop attach partition at_test_sql_partop_1 for values from (0) to (10);
-drop table at_test_sql_partop;
-drop operator class at_test_sql_partop using btree;
-drop function at_test_sql_partop;
-/* Test case for bug #16242 */
--- We create a parent and child where the child has missing
--- non-null attribute values, and arrange to pass them through
--- tuple conversion from the child to the parent tupdesc
-create table bar1 (a integer, b integer not null default 1)
-  partition by range (a);
-create table bar2 (a integer);
-insert into bar2 values (1);
-alter table bar2 add column b integer not null default 1;
--- (at this point bar2 contains tuple with natts=1)
-alter table bar1 attach partition bar2 default;
--- this works:
-select * from bar1;
- a | b 
----+---
- 1 | 1
-(1 row)
-
--- this exercises tuple conversion:
-create function xtrig()
-  returns trigger language plpgsql
-as $$
-  declare
-    r record;
-  begin
-    for r in select * from old loop
-      raise info 'a=%, b=%', r.a, r.b;
-    end loop;
-    return NULL;
-  end;
-$$;
-create trigger xtrig
-  after update on bar1
-  referencing old table as old
-  for each statement execute procedure xtrig();
-update bar1 set a = a + 1;
-INFO:  a=1, b=1
-/* End test case for bug #16242 */
-/* Test case for bug #17409 */
-create table attbl (p1 int constraint pk_attbl primary key);
-create table atref (c1 int references attbl(p1));
-cluster attbl using pk_attbl;
-alter table attbl alter column p1 set data type bigint;
-alter table atref alter column c1 set data type bigint;
-drop table attbl, atref;
-create table attbl (p1 int constraint pk_attbl primary key);
-alter table attbl replica identity using index pk_attbl;
-create table atref (c1 int references attbl(p1));
-alter table attbl alter column p1 set data type bigint;
-alter table atref alter column c1 set data type bigint;
-drop table attbl, atref;
-/* End test case for bug #17409 */
--- Test that ALTER TABLE rewrite preserves a clustered index
--- for normal indexes and indexes on constraints.
-create table alttype_cluster (a int);
-alter table alttype_cluster add primary key (a);
-create index alttype_cluster_ind on alttype_cluster (a);
-alter table alttype_cluster cluster on alttype_cluster_ind;
--- Normal index remains clustered.
-select indexrelid::regclass, indisclustered from pg_index
-  where indrelid = 'alttype_cluster'::regclass
-  order by indexrelid::regclass::text;
-      indexrelid      | indisclustered 
-----------------------+----------------
- alttype_cluster_ind  | t
- alttype_cluster_pkey | f
-(2 rows)
-
-alter table alttype_cluster alter a type bigint;
-select indexrelid::regclass, indisclustered from pg_index
-  where indrelid = 'alttype_cluster'::regclass
-  order by indexrelid::regclass::text;
-      indexrelid      | indisclustered 
-----------------------+----------------
- alttype_cluster_ind  | t
- alttype_cluster_pkey | f
-(2 rows)
-
--- Constraint index remains clustered.
-alter table alttype_cluster cluster on alttype_cluster_pkey;
-select indexrelid::regclass, indisclustered from pg_index
-  where indrelid = 'alttype_cluster'::regclass
-  order by indexrelid::regclass::text;
-      indexrelid      | indisclustered 
-----------------------+----------------
- alttype_cluster_ind  | f
- alttype_cluster_pkey | t
-(2 rows)
-
-alter table alttype_cluster alter a type int;
-select indexrelid::regclass, indisclustered from pg_index
-  where indrelid = 'alttype_cluster'::regclass
-  order by indexrelid::regclass::text;
-      indexrelid      | indisclustered 
-----------------------+----------------
- alttype_cluster_ind  | f
- alttype_cluster_pkey | t
-(2 rows)
-
-drop table alttype_cluster;
---
--- Check that attaching or detaching a partitioned partition correctly leads
--- to its partitions' constraint being updated to reflect the parent's
--- newly added/removed constraint
-create table target_parted (a int, b int) partition by list (a);
-create table attach_parted (a int, b int) partition by list (b);
-create table attach_parted_part1 partition of attach_parted for values in (1);
--- insert a row directly into the leaf partition so that its partition
--- constraint is built and stored in the relcache
-insert into attach_parted_part1 values (1, 1);
--- the following better invalidate the partition constraint of the leaf
--- partition too...
-alter table target_parted attach partition attach_parted for values in (1);
--- ...such that the following insert fails
-insert into attach_parted_part1 values (2, 1);
-ERROR:  new row for relation "attach_parted_part1" violates partition constraint
-DETAIL:  Failing row contains (2, 1).
--- ...and doesn't when the partition is detached along with its own partition
-alter table target_parted detach partition attach_parted;
-insert into attach_parted_part1 values (2, 1);
--- Test altering table having publication
-create schema alter1;
-create schema alter2;
-create table alter1.t1 (a int);
-set client_min_messages = 'ERROR';
-create publication pub1 for table alter1.t1, tables in schema alter2;
-reset client_min_messages;
-alter table alter1.t1 set schema alter2;
-\d+ alter2.t1
-                                    Table "alter2.t1"
- Column |  Type   | Collation | Nullable | Default | Storage | Stats target | Description 
---------+---------+-----------+----------+---------+---------+--------------+-------------
- a      | integer |           |          |         | plain   |              | 
-Publications:
-    "pub1"
-
-drop publication pub1;
-drop schema alter1 cascade;
-drop schema alter2 cascade;
-NOTICE:  drop cascades to table alter2.t1
+WARNING:  terminating connection because of crash of another server process
+DETAIL:  The postmaster has commanded this server process to roll back the current transaction and exit, because another server process exited abnormally and possibly corrupted shared memory.
+HINT:  In a moment you should be able to reconnect to the database and repeat your command.
+server closed the connection unexpectedly
+	This probably means the server terminated abnormally
+	before or while processing the request.
+connection to server was lost
diff -U3 /tmp/cirrus-ci-build/src/test/regress/expected/xml.out /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/xml.out
--- /tmp/cirrus-ci-build/src/test/regress/expected/xml.out	2024-09-20 04:07:19.098903800 +0000
+++ /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/xml.out	2024-09-20 04:17:09.041564838 +0000
@@ -1773,96 +1773,10 @@
                                          proargtypes text))
    SELECT * FROM z
    EXCEPT SELECT * FROM x;
- proname | proowner | procost | pronargs | proargnames | proargtypes 
----------+----------+---------+----------+-------------+-------------
-(0 rows)
-
-CREATE TABLE xmltest2(x xml, _path text);
-INSERT INTO xmltest2 VALUES('<d><r><ac>1</ac></r></d>', 'A');
-INSERT INTO xmltest2 VALUES('<d><r><bc>2</bc></r></d>', 'B');
-INSERT INTO xmltest2 VALUES('<d><r><cc>3</cc></r></d>', 'C');
-INSERT INTO xmltest2 VALUES('<d><r><dc>2</dc></r></d>', 'D');
-SELECT xmltable.* FROM xmltest2, LATERAL xmltable('/d/r' PASSING x COLUMNS a int PATH '' || lower(_path) || 'c');
- a 
----
- 1
- 2
- 3
- 2
-(4 rows)
-
-SELECT xmltable.* FROM xmltest2, LATERAL xmltable(('/d/r/' || lower(_path) || 'c') PASSING x COLUMNS a int PATH '.');
- a 
----
- 1
- 2
- 3
- 2
-(4 rows)
-
-SELECT xmltable.* FROM xmltest2, LATERAL xmltable(('/d/r/' || lower(_path) || 'c') PASSING x COLUMNS a int PATH 'x' DEFAULT ascii(_path) - 54);
- a  
-----
- 11
- 12
- 13
- 14
-(4 rows)
-
--- XPath result can be boolean or number too
-SELECT * FROM XMLTABLE('*' PASSING '<a>a</a>' COLUMNS a xml PATH '.', b text PATH '.', c text PATH '"hi"', d boolean PATH '. = "a"', e integer PATH 'string-length(.)');
-    a     | b | c  | d | e 
-----------+---+----+---+---
- <a>a</a> | a | hi | t | 1
-(1 row)
-
-\x
-SELECT * FROM XMLTABLE('*' PASSING '<e>pre<!--c1--><?pi arg?><![CDATA[&ent1]]><n2>&amp;deep</n2>post</e>' COLUMNS x xml PATH '/e/n2', y xml PATH '/');
--[ RECORD 1 ]-----------------------------------------------------------
-x | <n2>&amp;deep</n2>
-y | <e>pre<!--c1--><?pi arg?><![CDATA[&ent1]]><n2>&amp;deep</n2>post</e>+
-  | 
-
-\x
-SELECT * FROM XMLTABLE('.' PASSING XMLELEMENT(NAME a) columns a varchar(20) PATH '"<foo/>"', b xml PATH '"<foo/>"');
-   a    |      b       
---------+--------------
- <foo/> | &lt;foo/&gt;
-(1 row)
-
-SELECT xmltext(NULL);
- xmltext 
----------
- 
-(1 row)
-
-SELECT xmltext('');
- xmltext 
----------
- 
-(1 row)
-
-SELECT xmltext('  ');
- xmltext 
----------
-   
-(1 row)
-
-SELECT xmltext('foo `$_-+?=*^%!|/\()[]{}');
-         xmltext          
---------------------------
- foo `$_-+?=*^%!|/\()[]{}
-(1 row)
-
-SELECT xmltext('foo & <"bar">');
-              xmltext              
------------------------------------
- foo &amp; &lt;&quot;bar&quot;&gt;
-(1 row)
-
-SELECT xmltext('x'|| '<P>73</P>'::xml || .42 || true || 'j'::char);
-             xmltext             
----------------------------------
- x&lt;P&gt;73&lt;/P&gt;0.42truej
-(1 row)
-
+WARNING:  terminating connection because of crash of another server process
+DETAIL:  The postmaster has commanded this server process to roll back the current transaction and exit, because another server process exited abnormally and possibly corrupted shared memory.
+HINT:  In a moment you should be able to reconnect to the database and repeat your command.
+server closed the connection unexpectedly
+	This probably means the server terminated abnormally
+	before or while processing the request.
+connection to server was lost
diff -U3 /tmp/cirrus-ci-build/src/test/regress/expected/session_variables.out /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/session_variables.out
--- /tmp/cirrus-ci-build/src/test/regress/expected/session_variables.out	2024-09-20 04:07:19.074854042 +0000
+++ /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/session_variables.out	2024-09-20 04:17:08.581565316 +0000
@@ -1365,498 +1365,7 @@
 PREPARE p1(numeric) AS LET var1 = $1;
 PREPARE p2 AS SELECT var1;
 EXECUTE p1(pi() + 100);
-EXECUTE p2;
-      var1       
------------------
- 103.14159265359
-(1 row)
-
--- prepared plan cache invalidation test
-DROP VARIABLE var1;
-CREATE VARIABLE var1 numeric;
--- should be NULL
-EXECUTE p2;
- var1 
-------
-     
-(1 row)
-
-DEALLOCATE p1;
-DEALLOCATE p2;
-DROP VARIABLE var1;
-SET plan_cache_mode TO force_generic_plan;
-CREATE VARIABLE var1 numeric[];
-PREPARE p1(int, numeric) AS LET var1[$1] = $2;
-LET var1 = '{}'::numeric[];
-EXECUTE p1(1, 10.2);
-EXECUTE p1(2, 10.3);
-SELECT var1;
-    var1     
--------------
- {10.2,10.3}
-(1 row)
-
-DEALLOCATE p1;
-DROP VARIABLE var1;
--- temporary variables
-CREATE TEMP VARIABLE var1 AS int;
--- this view should be temporary
-CREATE VIEW var_test_view AS SELECT var1;
-NOTICE:  view "var_test_view" will be a temporary view
-DROP VARIABLE var1 CASCADE;
-NOTICE:  drop cascades to view var_test_view
-BEGIN;
-  CREATE TEMP VARIABLE var1 AS int ON COMMIT DROP;
-  LET var1 = 100;
-  SELECT var1;
- var1 
-------
-  100
-(1 row)
-
-COMMIT;
--- should be zero
-SELECT count(*) FROM pg_variable WHERE varname = 'var1';
- count 
--------
-     0
-(1 row)
-
--- should be zero
-SELECT count(*) FROM pg_session_variables();
- count 
--------
-     0
-(1 row)
-
-BEGIN;
-  CREATE TEMP VARIABLE var1 AS int ON COMMIT DROP;
-  LET var1 = 100;
-  SELECT var1;
- var1 
-------
-  100
-(1 row)
-
-ROLLBACK;
--- should be zero
-SELECT count(*) FROM pg_variable WHERE varname = 'var1';
- count 
--------
-     0
-(1 row)
-
--- should be zero
-SELECT count(*) FROM pg_session_variables();
- count 
--------
-     0
-(1 row)
-
-BEGIN;
-  CREATE TEMP VARIABLE var1 AS int ON COMMIT DROP;
-  LET var1 = 100;
-  DROP VARIABLE var1;
-COMMIT;
--- should be zero
-SELECT count(*) FROM pg_variable WHERE varname = 'var1';
- count 
--------
-     0
-(1 row)
-
--- should be zero
-SELECT count(*) FROM pg_session_variables();
- count 
--------
-     0
-(1 row)
-
-BEGIN;
-  CREATE TEMP VARIABLE var1 AS int ON COMMIT DROP;
-  LET var1 = 100;
-  DROP VARIABLE var1;
-ROLLBACK;
--- should be zero
-SELECT count(*) FROM pg_variable WHERE varname = 'var1';
- count 
--------
-     0
-(1 row)
-
--- should be zero
-SELECT count(*) FROM pg_session_variables();
- count 
--------
-     0
-(1 row)
-
-BEGIN;
-  CREATE TEMP VARIABLE var1 AS int ON COMMIT DROP;
-  LET var1 = 100;
-  SAVEPOINT s1;
-  DROP VARIABLE var1;
-  ROLLBACK TO s1;
-  SELECT var1;
- var1 
-------
-  100
-(1 row)
-
-COMMIT;
--- should be zero
-SELECT count(*) FROM pg_variable WHERE varname = 'var1';
- count 
--------
-     0
-(1 row)
-
--- should be zero
-SELECT count(*) FROM pg_session_variables();
- count 
--------
-     0
-(1 row)
-
-CREATE VARIABLE var1 AS int ON TRANSACTION END RESET;
-BEGIN;
-  LET var1 = 100;
-  SELECT var1;
- var1 
-------
-  100
-(1 row)
-
-COMMIT;
--- should be NULL;
-SELECT var1 IS NULL;
- ?column? 
-----------
- t
-(1 row)
-
-BEGIN;
-  LET var1 = 100;
-  SELECT var1;
- var1 
-------
-  100
-(1 row)
-
-ROLLBACK;
--- should be NULL
-SELECT var1 IS NULL;
- ?column? 
-----------
- t
-(1 row)
-
-DROP VARIABLE var1;
-CREATE OR REPLACE FUNCTION vartest_fx()
-RETURNS int AS $$
-BEGIN
-  RAISE NOTICE 'vartest_fx executed';
-  RETURN 0;
-END;
-$$ LANGUAGE plpgsql;
-CREATE VARIABLE var1 AS int DEFAULT vartest_fx();
--- vartest_fx should be protected by dep, should fail
-DROP FUNCTION vartest_fx();
-ERROR:  cannot drop function vartest_fx() because other objects depend on it
-DETAIL:  session variable var1 depends on function vartest_fx()
-HINT:  Use DROP ... CASCADE to drop the dependent objects too.
--- should be ok
-SELECT var1;
-NOTICE:  vartest_fx executed
- var1 
-------
-    0
-(1 row)
-
--- the defexpr should be evaluated only once
-SELECT var1;
- var1 
-------
-    0
-(1 row)
-
-DISCARD VARIABLES;
--- in this case, the defexpr should not be evaluated
-LET var1 = 100;
-SELECT var1;
- var1 
-------
-  100
-(1 row)
-
-DISCARD VARIABLES;
-CREATE OR REPLACE FUNCTION vartest_fx()
-RETURNS int AS $$
-BEGIN
-  RAISE EXCEPTION 'vartest_fx is executing';
-  RETURN 0;
-END;
-$$ LANGUAGE plpgsql;
--- should to fail, but not to crash
-SELECT var1;
-ERROR:  vartest_fx is executing
-CONTEXT:  PL/pgSQL function vartest_fx() line 3 at RAISE
--- again
-SELECT var1;
-ERROR:  vartest_fx is executing
-CONTEXT:  PL/pgSQL function vartest_fx() line 3 at RAISE
--- but we can write
-LET var1 = 100;
-SELECT var1;
- var1 
-------
-  100
-(1 row)
-
-DROP VARIABLE var1;
-DROP FUNCTION vartest_fx();
--- test NOT NULL
--- should be ok
-CREATE VARIABLE var1 AS int NOT NULL;
--- should to fail
-SELECT var1;
-ERROR:  null value is not allowed for NOT NULL session variable "public.var1"
-DETAIL:  The session variable was not initialized yet.
---should be ok
-LET var1 = 10;
-SELECT var1;
- var1 
-------
-   10
-(1 row)
-
-DROP VARIABLE var1;
--- should be ok
-CREATE VARIABLE var1 AS int NOT NULL DEFAULT 0;
---should be ok
-SELECT var1;
- var1 
-------
-    0
-(1 row)
-
--- should be ok
-LET var1 = 10;
-SELECT var1;
- var1 
-------
-   10
-(1 row)
-
-DISCARD VARIABLES;
--- should to fail
-LET var1 = NULL;
-ERROR:  null value is not allowed for NOT NULL session variable "public.var1"
-DROP VARIABLE var1;
--- test NOT NULL
-CREATE OR REPLACE FUNCTION vartest_fx()
-RETURNS int AS $$
-BEGIN
-  RETURN NULL;
-END;
-$$ LANGUAGE plpgsql;
-CREATE VARIABLE var1 AS int NOT NULL DEFAULT vartest_fx();
--- should to fail
-SELECT var1;
-ERROR:  null value is not allowed for NOT NULL session variable "public.var1"
-DETAIL:  The result of DEFAULT expression is NULL.
-DISCARD VARIABLES;
--- should be ok
-LET var1 = 10;
-SELECT var1;
- var1 
-------
-   10
-(1 row)
-
-CREATE OR REPLACE FUNCTION vartest_fx()
-RETURNS int AS $$
-BEGIN
-  RETURN 0;
-END;
-$$ LANGUAGE plpgsql;
-DISCARD VARIABLES;
--- should be ok
-SELECT var1;
- var1 
-------
-    0
-(1 row)
-
-DROP VARIABLE var1;
-DROP FUNCTION vartest_fx();
--- test IMMUTBLE
-CREATE IMMUTABLE VARIABLE var1 AS int;
--- should be ok
-SELECT var1;
- var1 
-------
-     
-(1 row)
-
--- first write should ok
--- should be ok
-LET var1 = 10;
--- should fail
-LET var1 = 20;
-ERROR:  session variable "public.var1" is declared IMMUTABLE
-DISCARD VARIABLES;
--- should be ok
-LET var1 = 10;
--- should fail
-LET var1 = 20;
-ERROR:  session variable "public.var1" is declared IMMUTABLE
-DISCARD VARIABLES;
--- should be ok
-SELECT var1;
- var1 
-------
-     
-(1 row)
-
--- should be ok
-LET var1 = NULL;
--- should fail
-LET var1 = 20;
-ERROR:  session variable "public.var1" is declared IMMUTABLE
-DROP VARIABLE var1;
-CREATE IMMUTABLE VARIABLE var1 AS int DEFAULT 10;
--- don't allow change when variable has DEFAULT value
--- should to fail
-LET var1 = 20;
-ERROR:  session variable "public.var1" is declared IMMUTABLE
-DISCARD VARIABLES;
--- should be ok
-SELECT var1;
- var1 
-------
-   10
-(1 row)
-
--- should fail
-LET var1 = 20;
-ERROR:  session variable "public.var1" is declared IMMUTABLE
-DROP VARIABLE var1;
--- should be ok
-CREATE IMMUTABLE VARIABLE var1 AS INT NOT NULL DEFAULT 10;
--- should to fail
-LET var1 = 10;
-ERROR:  session variable "public.var1" is declared IMMUTABLE
-LET var1 = 20;
-ERROR:  session variable "public.var1" is declared IMMUTABLE
--- should be ok
-SELECT var1;
- var1 
-------
-   10
-(1 row)
-
--- should to fail
-LET var1 = 30;
-ERROR:  session variable "public.var1" is declared IMMUTABLE
-DROP VARIABLE var1;
--- test transactional variables
-CREATE TRANSACTION VARIABLE tv AS int DEFAULT 0;
-BEGIN;
-  LET tv = 100;
-  SELECT tv;
- tv  
------
- 100
-(1 row)
-
-ROLLBACK;
-SELECT tv;
- tv 
-----
-  0
-(1 row)
-
-LET tv = 100;
-BEGIN;
-  LET tv = 1000;
-COMMIT;
-SELECT tv;
-  tv  
-------
- 1000
-(1 row)
-
-BEGIN;
-  LET tv = 0;
-  SELECT tv;
- tv 
-----
-  0
-(1 row)
-
-ROLLBACK;
-SELECT tv;
-  tv  
-------
- 1000
-(1 row)
-
--- test subtransactions
-BEGIN;
-  LET tv = 1;
-SAVEPOINT x1;
-  LET tv = 2;
-SAVEPOINT x2;
-  LET tv = 3;
-ROLLBACK TO x2;
-  SELECT tv;
- tv 
-----
-  2
-(1 row)
-
-  LET tv = 10;
-ROLLBACK TO x1;
-  SELECT tv;
- tv 
-----
-  1
-(1 row)
-
-ROLLBACK;
-SELECT tv;
-  tv  
-------
- 1000
-(1 row)
-
-BEGIN;
-  LET tv = 1;
-SAVEPOINT x1;
-  LET tv = 2;
-SAVEPOINT x2;
-  LET tv = 3;
-ROLLBACK TO x2;
-  SELECT tv;
- tv 
-----
-  2
-(1 row)
-
-  LET tv = 10;
-ROLLBACK TO x1;
-  SELECT tv;
- tv 
-----
-  1
-(1 row)
-
-COMMIT;
-SELECT tv;
- tv 
-----
-  1
-(1 row)
-
-DROP VARIABLE tv;
+server closed the connection unexpectedly
+	This probably means the server terminated abnormally
+	before or while processing the request.
+connection to server was lost
diff -U3 /tmp/cirrus-ci-build/src/test/regress/expected/partition_join.out /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/partition_join.out
--- /tmp/cirrus-ci-build/src/test/regress/expected/partition_join.out	2024-09-20 04:07:19.050804285 +0000
+++ /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/partition_join.out	2024-09-20 04:17:09.121564759 +0000
@@ -1,5231 +1,2 @@
---
--- PARTITION_JOIN
--- Test partitionwise join between partitioned tables
---
--- Enable partitionwise join, which by default is disabled.
-SET enable_partitionwise_join to true;
---
--- partitioned by a single column
---
-CREATE TABLE prt1 (a int, b int, c varchar) PARTITION BY RANGE(a);
-CREATE TABLE prt1_p1 PARTITION OF prt1 FOR VALUES FROM (0) TO (250);
-CREATE TABLE prt1_p3 PARTITION OF prt1 FOR VALUES FROM (500) TO (600);
-CREATE TABLE prt1_p2 PARTITION OF prt1 FOR VALUES FROM (250) TO (500);
-INSERT INTO prt1 SELECT i, i % 25, to_char(i, 'FM0000') FROM generate_series(0, 599) i WHERE i % 2 = 0;
-CREATE INDEX iprt1_p1_a on prt1_p1(a);
-CREATE INDEX iprt1_p2_a on prt1_p2(a);
-CREATE INDEX iprt1_p3_a on prt1_p3(a);
-ANALYZE prt1;
-CREATE TABLE prt2 (a int, b int, c varchar) PARTITION BY RANGE(b);
-CREATE TABLE prt2_p1 PARTITION OF prt2 FOR VALUES FROM (0) TO (250);
-CREATE TABLE prt2_p2 PARTITION OF prt2 FOR VALUES FROM (250) TO (500);
-CREATE TABLE prt2_p3 PARTITION OF prt2 FOR VALUES FROM (500) TO (600);
-INSERT INTO prt2 SELECT i % 25, i, to_char(i, 'FM0000') FROM generate_series(0, 599) i WHERE i % 3 = 0;
-CREATE INDEX iprt2_p1_b on prt2_p1(b);
-CREATE INDEX iprt2_p2_b on prt2_p2(b);
-CREATE INDEX iprt2_p3_b on prt2_p3(b);
-ANALYZE prt2;
--- inner join
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1 t1, prt2 t2 WHERE t1.a = t2.b AND t1.b = 0 ORDER BY t1.a, t2.b;
-                    QUERY PLAN                    
---------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Hash Join
-               Hash Cond: (t2_1.b = t1_1.a)
-               ->  Seq Scan on prt2_p1 t2_1
-               ->  Hash
-                     ->  Seq Scan on prt1_p1 t1_1
-                           Filter: (b = 0)
-         ->  Hash Join
-               Hash Cond: (t2_2.b = t1_2.a)
-               ->  Seq Scan on prt2_p2 t2_2
-               ->  Hash
-                     ->  Seq Scan on prt1_p2 t1_2
-                           Filter: (b = 0)
-         ->  Hash Join
-               Hash Cond: (t2_3.b = t1_3.a)
-               ->  Seq Scan on prt2_p3 t2_3
-               ->  Hash
-                     ->  Seq Scan on prt1_p3 t1_3
-                           Filter: (b = 0)
-(21 rows)
-
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1 t1, prt2 t2 WHERE t1.a = t2.b AND t1.b = 0 ORDER BY t1.a, t2.b;
-  a  |  c   |  b  |  c   
------+------+-----+------
-   0 | 0000 |   0 | 0000
- 150 | 0150 | 150 | 0150
- 300 | 0300 | 300 | 0300
- 450 | 0450 | 450 | 0450
-(4 rows)
-
--- inner join with partially-redundant join clauses
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1 t1, prt2 t2 WHERE t1.a = t2.a AND t1.a = t2.b ORDER BY t1.a, t2.b;
-                          QUERY PLAN                           
----------------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Merge Join
-               Merge Cond: (t1_1.a = t2_1.a)
-               ->  Index Scan using iprt1_p1_a on prt1_p1 t1_1
-               ->  Sort
-                     Sort Key: t2_1.b
-                     ->  Seq Scan on prt2_p1 t2_1
-                           Filter: (a = b)
-         ->  Hash Join
-               Hash Cond: (t1_2.a = t2_2.a)
-               ->  Seq Scan on prt1_p2 t1_2
-               ->  Hash
-                     ->  Seq Scan on prt2_p2 t2_2
-                           Filter: (a = b)
-         ->  Hash Join
-               Hash Cond: (t1_3.a = t2_3.a)
-               ->  Seq Scan on prt1_p3 t1_3
-               ->  Hash
-                     ->  Seq Scan on prt2_p3 t2_3
-                           Filter: (a = b)
-(22 rows)
-
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1 t1, prt2 t2 WHERE t1.a = t2.a AND t1.a = t2.b ORDER BY t1.a, t2.b;
- a  |  c   | b  |  c   
-----+------+----+------
-  0 | 0000 |  0 | 0000
-  6 | 0006 |  6 | 0006
- 12 | 0012 | 12 | 0012
- 18 | 0018 | 18 | 0018
- 24 | 0024 | 24 | 0024
-(5 rows)
-
--- left outer join, 3-way
-EXPLAIN (COSTS OFF)
-SELECT COUNT(*) FROM prt1 t1
-  LEFT JOIN prt1 t2 ON t1.a = t2.a
-  LEFT JOIN prt1 t3 ON t2.a = t3.a;
-                       QUERY PLAN                       
---------------------------------------------------------
- Aggregate
-   ->  Append
-         ->  Hash Left Join
-               Hash Cond: (t2_1.a = t3_1.a)
-               ->  Hash Left Join
-                     Hash Cond: (t1_1.a = t2_1.a)
-                     ->  Seq Scan on prt1_p1 t1_1
-                     ->  Hash
-                           ->  Seq Scan on prt1_p1 t2_1
-               ->  Hash
-                     ->  Seq Scan on prt1_p1 t3_1
-         ->  Hash Left Join
-               Hash Cond: (t2_2.a = t3_2.a)
-               ->  Hash Left Join
-                     Hash Cond: (t1_2.a = t2_2.a)
-                     ->  Seq Scan on prt1_p2 t1_2
-                     ->  Hash
-                           ->  Seq Scan on prt1_p2 t2_2
-               ->  Hash
-                     ->  Seq Scan on prt1_p2 t3_2
-         ->  Hash Left Join
-               Hash Cond: (t2_3.a = t3_3.a)
-               ->  Hash Left Join
-                     Hash Cond: (t1_3.a = t2_3.a)
-                     ->  Seq Scan on prt1_p3 t1_3
-                     ->  Hash
-                           ->  Seq Scan on prt1_p3 t2_3
-               ->  Hash
-                     ->  Seq Scan on prt1_p3 t3_3
-(29 rows)
-
-SELECT COUNT(*) FROM prt1 t1
-  LEFT JOIN prt1 t2 ON t1.a = t2.a
-  LEFT JOIN prt1 t3 ON t2.a = t3.a;
- count 
--------
-   300
-(1 row)
-
--- left outer join, with whole-row reference; partitionwise join does not apply
-EXPLAIN (COSTS OFF)
-SELECT t1, t2 FROM prt1 t1 LEFT JOIN prt2 t2 ON t1.a = t2.b WHERE t1.b = 0 ORDER BY t1.a, t2.b;
-                    QUERY PLAN                    
---------------------------------------------------
- Sort
-   Sort Key: t1.a, t2.b
-   ->  Hash Right Join
-         Hash Cond: (t2.b = t1.a)
-         ->  Append
-               ->  Seq Scan on prt2_p1 t2_1
-               ->  Seq Scan on prt2_p2 t2_2
-               ->  Seq Scan on prt2_p3 t2_3
-         ->  Hash
-               ->  Append
-                     ->  Seq Scan on prt1_p1 t1_1
-                           Filter: (b = 0)
-                     ->  Seq Scan on prt1_p2 t1_2
-                           Filter: (b = 0)
-                     ->  Seq Scan on prt1_p3 t1_3
-                           Filter: (b = 0)
-(16 rows)
-
-SELECT t1, t2 FROM prt1 t1 LEFT JOIN prt2 t2 ON t1.a = t2.b WHERE t1.b = 0 ORDER BY t1.a, t2.b;
-      t1      |      t2      
---------------+--------------
- (0,0,0000)   | (0,0,0000)
- (50,0,0050)  | 
- (100,0,0100) | 
- (150,0,0150) | (0,150,0150)
- (200,0,0200) | 
- (250,0,0250) | 
- (300,0,0300) | (0,300,0300)
- (350,0,0350) | 
- (400,0,0400) | 
- (450,0,0450) | (0,450,0450)
- (500,0,0500) | 
- (550,0,0550) | 
-(12 rows)
-
--- right outer join
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1 t1 RIGHT JOIN prt2 t2 ON t1.a = t2.b WHERE t2.a = 0 ORDER BY t1.a, t2.b;
-                          QUERY PLAN                           
----------------------------------------------------------------
- Sort
-   Sort Key: t1.a, t2.b
-   ->  Append
-         ->  Hash Right Join
-               Hash Cond: (t1_1.a = t2_1.b)
-               ->  Seq Scan on prt1_p1 t1_1
-               ->  Hash
-                     ->  Seq Scan on prt2_p1 t2_1
-                           Filter: (a = 0)
-         ->  Hash Right Join
-               Hash Cond: (t1_2.a = t2_2.b)
-               ->  Seq Scan on prt1_p2 t1_2
-               ->  Hash
-                     ->  Seq Scan on prt2_p2 t2_2
-                           Filter: (a = 0)
-         ->  Nested Loop Left Join
-               ->  Seq Scan on prt2_p3 t2_3
-                     Filter: (a = 0)
-               ->  Index Scan using iprt1_p3_a on prt1_p3 t1_3
-                     Index Cond: (a = t2_3.b)
-(20 rows)
-
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1 t1 RIGHT JOIN prt2 t2 ON t1.a = t2.b WHERE t2.a = 0 ORDER BY t1.a, t2.b;
-  a  |  c   |  b  |  c   
------+------+-----+------
-   0 | 0000 |   0 | 0000
- 150 | 0150 | 150 | 0150
- 300 | 0300 | 300 | 0300
- 450 | 0450 | 450 | 0450
-     |      |  75 | 0075
-     |      | 225 | 0225
-     |      | 375 | 0375
-     |      | 525 | 0525
-(8 rows)
-
--- full outer join, with placeholder vars
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM (SELECT 50 phv, * FROM prt1 WHERE prt1.b = 0) t1 FULL JOIN (SELECT 75 phv, * FROM prt2 WHERE prt2.a = 0) t2 ON (t1.a = t2.b) WHERE t1.phv = t1.a OR t2.phv = t2.b ORDER BY t1.a, t2.b;
-                           QUERY PLAN                           
-----------------------------------------------------------------
- Sort
-   Sort Key: prt1.a, prt2.b
-   ->  Append
-         ->  Hash Full Join
-               Hash Cond: (prt1_1.a = prt2_1.b)
-               Filter: (((50) = prt1_1.a) OR ((75) = prt2_1.b))
-               ->  Seq Scan on prt1_p1 prt1_1
-                     Filter: (b = 0)
-               ->  Hash
-                     ->  Seq Scan on prt2_p1 prt2_1
-                           Filter: (a = 0)
-         ->  Hash Full Join
-               Hash Cond: (prt1_2.a = prt2_2.b)
-               Filter: (((50) = prt1_2.a) OR ((75) = prt2_2.b))
-               ->  Seq Scan on prt1_p2 prt1_2
-                     Filter: (b = 0)
-               ->  Hash
-                     ->  Seq Scan on prt2_p2 prt2_2
-                           Filter: (a = 0)
-         ->  Hash Full Join
-               Hash Cond: (prt1_3.a = prt2_3.b)
-               Filter: (((50) = prt1_3.a) OR ((75) = prt2_3.b))
-               ->  Seq Scan on prt1_p3 prt1_3
-                     Filter: (b = 0)
-               ->  Hash
-                     ->  Seq Scan on prt2_p3 prt2_3
-                           Filter: (a = 0)
-(27 rows)
-
-SELECT t1.a, t1.c, t2.b, t2.c FROM (SELECT 50 phv, * FROM prt1 WHERE prt1.b = 0) t1 FULL JOIN (SELECT 75 phv, * FROM prt2 WHERE prt2.a = 0) t2 ON (t1.a = t2.b) WHERE t1.phv = t1.a OR t2.phv = t2.b ORDER BY t1.a, t2.b;
- a  |  c   | b  |  c   
-----+------+----+------
- 50 | 0050 |    | 
-    |      | 75 | 0075
-(2 rows)
-
--- Join with pruned partitions from joining relations
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1 t1, prt2 t2 WHERE t1.a = t2.b AND t1.a < 450 AND t2.b > 250 AND t1.b = 0 ORDER BY t1.a, t2.b;
-                     QUERY PLAN                      
------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Hash Join
-         Hash Cond: (t2.b = t1.a)
-         ->  Seq Scan on prt2_p2 t2
-               Filter: (b > 250)
-         ->  Hash
-               ->  Seq Scan on prt1_p2 t1
-                     Filter: ((a < 450) AND (b = 0))
-(9 rows)
-
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1 t1, prt2 t2 WHERE t1.a = t2.b AND t1.a < 450 AND t2.b > 250 AND t1.b = 0 ORDER BY t1.a, t2.b;
-  a  |  c   |  b  |  c   
------+------+-----+------
- 300 | 0300 | 300 | 0300
-(1 row)
-
--- Currently we can't do partitioned join if nullable-side partitions are pruned
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM (SELECT * FROM prt1 WHERE a < 450) t1 LEFT JOIN (SELECT * FROM prt2 WHERE b > 250) t2 ON t1.a = t2.b WHERE t1.b = 0 ORDER BY t1.a, t2.b;
-                        QUERY PLAN                         
------------------------------------------------------------
- Sort
-   Sort Key: prt1.a, prt2.b
-   ->  Hash Right Join
-         Hash Cond: (prt2.b = prt1.a)
-         ->  Append
-               ->  Seq Scan on prt2_p2 prt2_1
-                     Filter: (b > 250)
-               ->  Seq Scan on prt2_p3 prt2_2
-                     Filter: (b > 250)
-         ->  Hash
-               ->  Append
-                     ->  Seq Scan on prt1_p1 prt1_1
-                           Filter: ((a < 450) AND (b = 0))
-                     ->  Seq Scan on prt1_p2 prt1_2
-                           Filter: ((a < 450) AND (b = 0))
-(15 rows)
-
-SELECT t1.a, t1.c, t2.b, t2.c FROM (SELECT * FROM prt1 WHERE a < 450) t1 LEFT JOIN (SELECT * FROM prt2 WHERE b > 250) t2 ON t1.a = t2.b WHERE t1.b = 0 ORDER BY t1.a, t2.b;
-  a  |  c   |  b  |  c   
------+------+-----+------
-   0 | 0000 |     | 
-  50 | 0050 |     | 
- 100 | 0100 |     | 
- 150 | 0150 |     | 
- 200 | 0200 |     | 
- 250 | 0250 |     | 
- 300 | 0300 | 300 | 0300
- 350 | 0350 |     | 
- 400 | 0400 |     | 
-(9 rows)
-
--- Currently we can't do partitioned join if nullable-side partitions are pruned
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM (SELECT * FROM prt1 WHERE a < 450) t1 FULL JOIN (SELECT * FROM prt2 WHERE b > 250) t2 ON t1.a = t2.b WHERE t1.b = 0 OR t2.a = 0 ORDER BY t1.a, t2.b;
-                     QUERY PLAN                     
-----------------------------------------------------
- Sort
-   Sort Key: prt1.a, prt2.b
-   ->  Hash Full Join
-         Hash Cond: (prt1.a = prt2.b)
-         Filter: ((prt1.b = 0) OR (prt2.a = 0))
-         ->  Append
-               ->  Seq Scan on prt1_p1 prt1_1
-                     Filter: (a < 450)
-               ->  Seq Scan on prt1_p2 prt1_2
-                     Filter: (a < 450)
-         ->  Hash
-               ->  Append
-                     ->  Seq Scan on prt2_p2 prt2_1
-                           Filter: (b > 250)
-                     ->  Seq Scan on prt2_p3 prt2_2
-                           Filter: (b > 250)
-(16 rows)
-
-SELECT t1.a, t1.c, t2.b, t2.c FROM (SELECT * FROM prt1 WHERE a < 450) t1 FULL JOIN (SELECT * FROM prt2 WHERE b > 250) t2 ON t1.a = t2.b WHERE t1.b = 0 OR t2.a = 0 ORDER BY t1.a, t2.b;
-  a  |  c   |  b  |  c   
------+------+-----+------
-   0 | 0000 |     | 
-  50 | 0050 |     | 
- 100 | 0100 |     | 
- 150 | 0150 |     | 
- 200 | 0200 |     | 
- 250 | 0250 |     | 
- 300 | 0300 | 300 | 0300
- 350 | 0350 |     | 
- 400 | 0400 |     | 
-     |      | 375 | 0375
-     |      | 450 | 0450
-     |      | 525 | 0525
-(12 rows)
-
--- Semi-join
-EXPLAIN (COSTS OFF)
-SELECT t1.* FROM prt1 t1 WHERE t1.a IN (SELECT t2.b FROM prt2 t2 WHERE t2.a = 0) AND t1.b = 0 ORDER BY t1.a;
-                    QUERY PLAN                    
---------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Hash Semi Join
-               Hash Cond: (t1_1.a = t2_1.b)
-               ->  Seq Scan on prt1_p1 t1_1
-                     Filter: (b = 0)
-               ->  Hash
-                     ->  Seq Scan on prt2_p1 t2_1
-                           Filter: (a = 0)
-         ->  Hash Semi Join
-               Hash Cond: (t1_2.a = t2_2.b)
-               ->  Seq Scan on prt1_p2 t1_2
-                     Filter: (b = 0)
-               ->  Hash
-                     ->  Seq Scan on prt2_p2 t2_2
-                           Filter: (a = 0)
-         ->  Nested Loop Semi Join
-               Join Filter: (t1_3.a = t2_3.b)
-               ->  Seq Scan on prt1_p3 t1_3
-                     Filter: (b = 0)
-               ->  Materialize
-                     ->  Seq Scan on prt2_p3 t2_3
-                           Filter: (a = 0)
-(24 rows)
-
-SELECT t1.* FROM prt1 t1 WHERE t1.a IN (SELECT t2.b FROM prt2 t2 WHERE t2.a = 0) AND t1.b = 0 ORDER BY t1.a;
-  a  | b |  c   
------+---+------
-   0 | 0 | 0000
- 150 | 0 | 0150
- 300 | 0 | 0300
- 450 | 0 | 0450
-(4 rows)
-
--- Anti-join with aggregates
-EXPLAIN (COSTS OFF)
-SELECT sum(t1.a), avg(t1.a), sum(t1.b), avg(t1.b) FROM prt1 t1 WHERE NOT EXISTS (SELECT 1 FROM prt2 t2 WHERE t1.a = t2.b);
-                    QUERY PLAN                    
---------------------------------------------------
- Aggregate
-   ->  Append
-         ->  Hash Anti Join
-               Hash Cond: (t1_1.a = t2_1.b)
-               ->  Seq Scan on prt1_p1 t1_1
-               ->  Hash
-                     ->  Seq Scan on prt2_p1 t2_1
-         ->  Hash Anti Join
-               Hash Cond: (t1_2.a = t2_2.b)
-               ->  Seq Scan on prt1_p2 t1_2
-               ->  Hash
-                     ->  Seq Scan on prt2_p2 t2_2
-         ->  Hash Anti Join
-               Hash Cond: (t1_3.a = t2_3.b)
-               ->  Seq Scan on prt1_p3 t1_3
-               ->  Hash
-                     ->  Seq Scan on prt2_p3 t2_3
-(17 rows)
-
-SELECT sum(t1.a), avg(t1.a), sum(t1.b), avg(t1.b) FROM prt1 t1 WHERE NOT EXISTS (SELECT 1 FROM prt2 t2 WHERE t1.a = t2.b);
-  sum  |         avg          | sum  |         avg         
--------+----------------------+------+---------------------
- 60000 | 300.0000000000000000 | 2400 | 12.0000000000000000
-(1 row)
-
--- lateral reference
-EXPLAIN (COSTS OFF)
-SELECT * FROM prt1 t1 LEFT JOIN LATERAL
-			  (SELECT t2.a AS t2a, t3.a AS t3a, least(t1.a,t2.a,t3.b) FROM prt1 t2 JOIN prt2 t3 ON (t2.a = t3.b)) ss
-			  ON t1.a = ss.t2a WHERE t1.b = 0 ORDER BY t1.a;
-                                QUERY PLAN                                
---------------------------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Nested Loop Left Join
-               ->  Seq Scan on prt1_p1 t1_1
-                     Filter: (b = 0)
-               ->  Nested Loop
-                     ->  Index Only Scan using iprt1_p1_a on prt1_p1 t2_1
-                           Index Cond: (a = t1_1.a)
-                     ->  Index Scan using iprt2_p1_b on prt2_p1 t3_1
-                           Index Cond: (b = t2_1.a)
-         ->  Nested Loop Left Join
-               ->  Seq Scan on prt1_p2 t1_2
-                     Filter: (b = 0)
-               ->  Nested Loop
-                     ->  Index Only Scan using iprt1_p2_a on prt1_p2 t2_2
-                           Index Cond: (a = t1_2.a)
-                     ->  Index Scan using iprt2_p2_b on prt2_p2 t3_2
-                           Index Cond: (b = t2_2.a)
-         ->  Nested Loop Left Join
-               ->  Seq Scan on prt1_p3 t1_3
-                     Filter: (b = 0)
-               ->  Nested Loop
-                     ->  Index Only Scan using iprt1_p3_a on prt1_p3 t2_3
-                           Index Cond: (a = t1_3.a)
-                     ->  Index Scan using iprt2_p3_b on prt2_p3 t3_3
-                           Index Cond: (b = t2_3.a)
-(27 rows)
-
-SELECT * FROM prt1 t1 LEFT JOIN LATERAL
-			  (SELECT t2.a AS t2a, t3.a AS t3a, least(t1.a,t2.a,t3.b) FROM prt1 t2 JOIN prt2 t3 ON (t2.a = t3.b)) ss
-			  ON t1.a = ss.t2a WHERE t1.b = 0 ORDER BY t1.a;
-  a  | b |  c   | t2a | t3a | least 
------+---+------+-----+-----+-------
-   0 | 0 | 0000 |   0 |   0 |     0
-  50 | 0 | 0050 |     |     |      
- 100 | 0 | 0100 |     |     |      
- 150 | 0 | 0150 | 150 |   0 |   150
- 200 | 0 | 0200 |     |     |      
- 250 | 0 | 0250 |     |     |      
- 300 | 0 | 0300 | 300 |   0 |   300
- 350 | 0 | 0350 |     |     |      
- 400 | 0 | 0400 |     |     |      
- 450 | 0 | 0450 | 450 |   0 |   450
- 500 | 0 | 0500 |     |     |      
- 550 | 0 | 0550 |     |     |      
-(12 rows)
-
-EXPLAIN (COSTS OFF)
-SELECT t1.a, ss.t2a, ss.t2c FROM prt1 t1 LEFT JOIN LATERAL
-			  (SELECT t2.a AS t2a, t3.a AS t3a, t2.b t2b, t2.c t2c, least(t1.a,t2.a,t3.b) FROM prt1 t2 JOIN prt2 t3 ON (t2.a = t3.b)) ss
-			  ON t1.c = ss.t2c WHERE (t1.b + coalesce(ss.t2b, 0)) = 0 ORDER BY t1.a;
-                          QUERY PLAN                          
---------------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Hash Left Join
-         Hash Cond: ((t1.c)::text = (t2.c)::text)
-         Filter: ((t1.b + COALESCE(t2.b, 0)) = 0)
-         ->  Append
-               ->  Seq Scan on prt1_p1 t1_1
-               ->  Seq Scan on prt1_p2 t1_2
-               ->  Seq Scan on prt1_p3 t1_3
-         ->  Hash
-               ->  Append
-                     ->  Hash Join
-                           Hash Cond: (t2_1.a = t3_1.b)
-                           ->  Seq Scan on prt1_p1 t2_1
-                           ->  Hash
-                                 ->  Seq Scan on prt2_p1 t3_1
-                     ->  Hash Join
-                           Hash Cond: (t2_2.a = t3_2.b)
-                           ->  Seq Scan on prt1_p2 t2_2
-                           ->  Hash
-                                 ->  Seq Scan on prt2_p2 t3_2
-                     ->  Hash Join
-                           Hash Cond: (t2_3.a = t3_3.b)
-                           ->  Seq Scan on prt1_p3 t2_3
-                           ->  Hash
-                                 ->  Seq Scan on prt2_p3 t3_3
-(26 rows)
-
-SELECT t1.a, ss.t2a, ss.t2c FROM prt1 t1 LEFT JOIN LATERAL
-			  (SELECT t2.a AS t2a, t3.a AS t3a, t2.b t2b, t2.c t2c, least(t1.a,t2.a,t3.a) FROM prt1 t2 JOIN prt2 t3 ON (t2.a = t3.b)) ss
-			  ON t1.c = ss.t2c WHERE (t1.b + coalesce(ss.t2b, 0)) = 0 ORDER BY t1.a;
-  a  | t2a | t2c  
------+-----+------
-   0 |   0 | 0000
-  50 |     | 
- 100 |     | 
- 150 | 150 | 0150
- 200 |     | 
- 250 |     | 
- 300 | 300 | 0300
- 350 |     | 
- 400 |     | 
- 450 | 450 | 0450
- 500 |     | 
- 550 |     | 
-(12 rows)
-
--- lateral reference in sample scan
-EXPLAIN (COSTS OFF)
-SELECT * FROM prt1 t1 JOIN LATERAL
-			  (SELECT * FROM prt1 t2 TABLESAMPLE SYSTEM (t1.a) REPEATABLE(t1.b)) s
-			  ON t1.a = s.a;
-                         QUERY PLAN                          
--------------------------------------------------------------
- Append
-   ->  Nested Loop
-         ->  Seq Scan on prt1_p1 t1_1
-         ->  Sample Scan on prt1_p1 t2_1
-               Sampling: system (t1_1.a) REPEATABLE (t1_1.b)
-               Filter: (t1_1.a = a)
-   ->  Nested Loop
-         ->  Seq Scan on prt1_p2 t1_2
-         ->  Sample Scan on prt1_p2 t2_2
-               Sampling: system (t1_2.a) REPEATABLE (t1_2.b)
-               Filter: (t1_2.a = a)
-   ->  Nested Loop
-         ->  Seq Scan on prt1_p3 t1_3
-         ->  Sample Scan on prt1_p3 t2_3
-               Sampling: system (t1_3.a) REPEATABLE (t1_3.b)
-               Filter: (t1_3.a = a)
-(16 rows)
-
--- lateral reference in scan's restriction clauses
-EXPLAIN (COSTS OFF)
-SELECT count(*) FROM prt1 t1 LEFT JOIN LATERAL
-			  (SELECT t1.b AS t1b, t2.* FROM prt2 t2) s
-			  ON t1.a = s.b WHERE s.t1b = s.a;
-                          QUERY PLAN                           
----------------------------------------------------------------
- Aggregate
-   ->  Append
-         ->  Nested Loop
-               ->  Seq Scan on prt1_p1 t1_1
-               ->  Index Scan using iprt2_p1_b on prt2_p1 t2_1
-                     Index Cond: (b = t1_1.a)
-                     Filter: (t1_1.b = a)
-         ->  Nested Loop
-               ->  Seq Scan on prt1_p2 t1_2
-               ->  Index Scan using iprt2_p2_b on prt2_p2 t2_2
-                     Index Cond: (b = t1_2.a)
-                     Filter: (t1_2.b = a)
-         ->  Nested Loop
-               ->  Seq Scan on prt1_p3 t1_3
-               ->  Index Scan using iprt2_p3_b on prt2_p3 t2_3
-                     Index Cond: (b = t1_3.a)
-                     Filter: (t1_3.b = a)
-(17 rows)
-
-SELECT count(*) FROM prt1 t1 LEFT JOIN LATERAL
-			  (SELECT t1.b AS t1b, t2.* FROM prt2 t2) s
-			  ON t1.a = s.b WHERE s.t1b = s.a;
- count 
--------
-   100
-(1 row)
-
-EXPLAIN (COSTS OFF)
-SELECT count(*) FROM prt1 t1 LEFT JOIN LATERAL
-			  (SELECT t1.b AS t1b, t2.* FROM prt2 t2) s
-			  ON t1.a = s.b WHERE s.t1b = s.b;
-                             QUERY PLAN                             
---------------------------------------------------------------------
- Aggregate
-   ->  Append
-         ->  Nested Loop
-               ->  Seq Scan on prt1_p1 t1_1
-               ->  Index Only Scan using iprt2_p1_b on prt2_p1 t2_1
-                     Index Cond: (b = t1_1.a)
-                     Filter: (b = t1_1.b)
-         ->  Nested Loop
-               ->  Seq Scan on prt1_p2 t1_2
-               ->  Index Only Scan using iprt2_p2_b on prt2_p2 t2_2
-                     Index Cond: (b = t1_2.a)
-                     Filter: (b = t1_2.b)
-         ->  Nested Loop
-               ->  Seq Scan on prt1_p3 t1_3
-               ->  Index Only Scan using iprt2_p3_b on prt2_p3 t2_3
-                     Index Cond: (b = t1_3.a)
-                     Filter: (b = t1_3.b)
-(17 rows)
-
-SELECT count(*) FROM prt1 t1 LEFT JOIN LATERAL
-			  (SELECT t1.b AS t1b, t2.* FROM prt2 t2) s
-			  ON t1.a = s.b WHERE s.t1b = s.b;
- count 
--------
-     5
-(1 row)
-
--- bug with inadequate sort key representation
-SET enable_partitionwise_aggregate TO true;
-SET enable_hashjoin TO false;
-EXPLAIN (COSTS OFF)
-SELECT a, b FROM prt1 FULL JOIN prt2 p2(b,a,c) USING(a,b)
-  WHERE a BETWEEN 490 AND 510
-  GROUP BY 1, 2 ORDER BY 1, 2;
-                                                   QUERY PLAN                                                    
------------------------------------------------------------------------------------------------------------------
- Group
-   Group Key: (COALESCE(prt1.a, p2.a)), (COALESCE(prt1.b, p2.b))
-   ->  Merge Append
-         Sort Key: (COALESCE(prt1.a, p2.a)), (COALESCE(prt1.b, p2.b))
-         ->  Group
-               Group Key: (COALESCE(prt1.a, p2.a)), (COALESCE(prt1.b, p2.b))
-               ->  Sort
-                     Sort Key: (COALESCE(prt1.a, p2.a)), (COALESCE(prt1.b, p2.b))
-                     ->  Merge Full Join
-                           Merge Cond: ((prt1.a = p2.a) AND (prt1.b = p2.b))
-                           Filter: ((COALESCE(prt1.a, p2.a) >= 490) AND (COALESCE(prt1.a, p2.a) <= 510))
-                           ->  Sort
-                                 Sort Key: prt1.a, prt1.b
-                                 ->  Seq Scan on prt1_p1 prt1
-                           ->  Sort
-                                 Sort Key: p2.a, p2.b
-                                 ->  Seq Scan on prt2_p1 p2
-         ->  Group
-               Group Key: (COALESCE(prt1_1.a, p2_1.a)), (COALESCE(prt1_1.b, p2_1.b))
-               ->  Sort
-                     Sort Key: (COALESCE(prt1_1.a, p2_1.a)), (COALESCE(prt1_1.b, p2_1.b))
-                     ->  Merge Full Join
-                           Merge Cond: ((prt1_1.a = p2_1.a) AND (prt1_1.b = p2_1.b))
-                           Filter: ((COALESCE(prt1_1.a, p2_1.a) >= 490) AND (COALESCE(prt1_1.a, p2_1.a) <= 510))
-                           ->  Sort
-                                 Sort Key: prt1_1.a, prt1_1.b
-                                 ->  Seq Scan on prt1_p2 prt1_1
-                           ->  Sort
-                                 Sort Key: p2_1.a, p2_1.b
-                                 ->  Seq Scan on prt2_p2 p2_1
-         ->  Group
-               Group Key: (COALESCE(prt1_2.a, p2_2.a)), (COALESCE(prt1_2.b, p2_2.b))
-               ->  Sort
-                     Sort Key: (COALESCE(prt1_2.a, p2_2.a)), (COALESCE(prt1_2.b, p2_2.b))
-                     ->  Merge Full Join
-                           Merge Cond: ((prt1_2.a = p2_2.a) AND (prt1_2.b = p2_2.b))
-                           Filter: ((COALESCE(prt1_2.a, p2_2.a) >= 490) AND (COALESCE(prt1_2.a, p2_2.a) <= 510))
-                           ->  Sort
-                                 Sort Key: prt1_2.a, prt1_2.b
-                                 ->  Seq Scan on prt1_p3 prt1_2
-                           ->  Sort
-                                 Sort Key: p2_2.a, p2_2.b
-                                 ->  Seq Scan on prt2_p3 p2_2
-(43 rows)
-
-SELECT a, b FROM prt1 FULL JOIN prt2 p2(b,a,c) USING(a,b)
-  WHERE a BETWEEN 490 AND 510
-  GROUP BY 1, 2 ORDER BY 1, 2;
-  a  | b  
------+----
- 490 | 15
- 492 | 17
- 494 | 19
- 495 | 20
- 496 | 21
- 498 | 23
- 500 |  0
- 501 |  1
- 502 |  2
- 504 |  4
- 506 |  6
- 507 |  7
- 508 |  8
- 510 | 10
-(14 rows)
-
-RESET enable_partitionwise_aggregate;
-RESET enable_hashjoin;
---
--- partitioned by expression
---
-CREATE TABLE prt1_e (a int, b int, c int) PARTITION BY RANGE(((a + b)/2));
-CREATE TABLE prt1_e_p1 PARTITION OF prt1_e FOR VALUES FROM (0) TO (250);
-CREATE TABLE prt1_e_p2 PARTITION OF prt1_e FOR VALUES FROM (250) TO (500);
-CREATE TABLE prt1_e_p3 PARTITION OF prt1_e FOR VALUES FROM (500) TO (600);
-INSERT INTO prt1_e SELECT i, i, i % 25 FROM generate_series(0, 599, 2) i;
-CREATE INDEX iprt1_e_p1_ab2 on prt1_e_p1(((a+b)/2));
-CREATE INDEX iprt1_e_p2_ab2 on prt1_e_p2(((a+b)/2));
-CREATE INDEX iprt1_e_p3_ab2 on prt1_e_p3(((a+b)/2));
-ANALYZE prt1_e;
-CREATE TABLE prt2_e (a int, b int, c int) PARTITION BY RANGE(((b + a)/2));
-CREATE TABLE prt2_e_p1 PARTITION OF prt2_e FOR VALUES FROM (0) TO (250);
-CREATE TABLE prt2_e_p2 PARTITION OF prt2_e FOR VALUES FROM (250) TO (500);
-CREATE TABLE prt2_e_p3 PARTITION OF prt2_e FOR VALUES FROM (500) TO (600);
-INSERT INTO prt2_e SELECT i, i, i % 25 FROM generate_series(0, 599, 3) i;
-ANALYZE prt2_e;
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1_e t1, prt2_e t2 WHERE (t1.a + t1.b)/2 = (t2.b + t2.a)/2 AND t1.c = 0 ORDER BY t1.a, t2.b;
-                                  QUERY PLAN                                  
-------------------------------------------------------------------------------
- Sort
-   Sort Key: t1.a, t2.b
-   ->  Append
-         ->  Hash Join
-               Hash Cond: (((t2_1.b + t2_1.a) / 2) = ((t1_1.a + t1_1.b) / 2))
-               ->  Seq Scan on prt2_e_p1 t2_1
-               ->  Hash
-                     ->  Seq Scan on prt1_e_p1 t1_1
-                           Filter: (c = 0)
-         ->  Hash Join
-               Hash Cond: (((t2_2.b + t2_2.a) / 2) = ((t1_2.a + t1_2.b) / 2))
-               ->  Seq Scan on prt2_e_p2 t2_2
-               ->  Hash
-                     ->  Seq Scan on prt1_e_p2 t1_2
-                           Filter: (c = 0)
-         ->  Hash Join
-               Hash Cond: (((t2_3.b + t2_3.a) / 2) = ((t1_3.a + t1_3.b) / 2))
-               ->  Seq Scan on prt2_e_p3 t2_3
-               ->  Hash
-                     ->  Seq Scan on prt1_e_p3 t1_3
-                           Filter: (c = 0)
-(21 rows)
-
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1_e t1, prt2_e t2 WHERE (t1.a + t1.b)/2 = (t2.b + t2.a)/2 AND t1.c = 0 ORDER BY t1.a, t2.b;
-  a  | c |  b  | c 
------+---+-----+---
-   0 | 0 |   0 | 0
- 150 | 0 | 150 | 0
- 300 | 0 | 300 | 0
- 450 | 0 | 450 | 0
-(4 rows)
-
---
--- N-way join
---
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c, t3.a + t3.b, t3.c FROM prt1 t1, prt2 t2, prt1_e t3 WHERE t1.a = t2.b AND t1.a = (t3.a + t3.b)/2 AND t1.b = 0 ORDER BY t1.a, t2.b;
-                             QUERY PLAN                              
----------------------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Nested Loop
-               Join Filter: (t1_1.a = ((t3_1.a + t3_1.b) / 2))
-               ->  Hash Join
-                     Hash Cond: (t2_1.b = t1_1.a)
-                     ->  Seq Scan on prt2_p1 t2_1
-                     ->  Hash
-                           ->  Seq Scan on prt1_p1 t1_1
-                                 Filter: (b = 0)
-               ->  Index Scan using iprt1_e_p1_ab2 on prt1_e_p1 t3_1
-                     Index Cond: (((a + b) / 2) = t2_1.b)
-         ->  Nested Loop
-               Join Filter: (t1_2.a = ((t3_2.a + t3_2.b) / 2))
-               ->  Hash Join
-                     Hash Cond: (t2_2.b = t1_2.a)
-                     ->  Seq Scan on prt2_p2 t2_2
-                     ->  Hash
-                           ->  Seq Scan on prt1_p2 t1_2
-                                 Filter: (b = 0)
-               ->  Index Scan using iprt1_e_p2_ab2 on prt1_e_p2 t3_2
-                     Index Cond: (((a + b) / 2) = t2_2.b)
-         ->  Nested Loop
-               Join Filter: (t1_3.a = ((t3_3.a + t3_3.b) / 2))
-               ->  Hash Join
-                     Hash Cond: (t2_3.b = t1_3.a)
-                     ->  Seq Scan on prt2_p3 t2_3
-                     ->  Hash
-                           ->  Seq Scan on prt1_p3 t1_3
-                                 Filter: (b = 0)
-               ->  Index Scan using iprt1_e_p3_ab2 on prt1_e_p3 t3_3
-                     Index Cond: (((a + b) / 2) = t2_3.b)
-(33 rows)
-
-SELECT t1.a, t1.c, t2.b, t2.c, t3.a + t3.b, t3.c FROM prt1 t1, prt2 t2, prt1_e t3 WHERE t1.a = t2.b AND t1.a = (t3.a + t3.b)/2 AND t1.b = 0 ORDER BY t1.a, t2.b;
-  a  |  c   |  b  |  c   | ?column? | c 
------+------+-----+------+----------+---
-   0 | 0000 |   0 | 0000 |        0 | 0
- 150 | 0150 | 150 | 0150 |      300 | 0
- 300 | 0300 | 300 | 0300 |      600 | 0
- 450 | 0450 | 450 | 0450 |      900 | 0
-(4 rows)
-
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c, t3.a + t3.b, t3.c FROM (prt1 t1 LEFT JOIN prt2 t2 ON t1.a = t2.b) LEFT JOIN prt1_e t3 ON (t1.a = (t3.a + t3.b)/2) WHERE t1.b = 0 ORDER BY t1.a, t2.b, t3.a + t3.b;
-                          QUERY PLAN                          
---------------------------------------------------------------
- Sort
-   Sort Key: t1.a, t2.b, ((t3.a + t3.b))
-   ->  Append
-         ->  Hash Right Join
-               Hash Cond: (((t3_1.a + t3_1.b) / 2) = t1_1.a)
-               ->  Seq Scan on prt1_e_p1 t3_1
-               ->  Hash
-                     ->  Hash Right Join
-                           Hash Cond: (t2_1.b = t1_1.a)
-                           ->  Seq Scan on prt2_p1 t2_1
-                           ->  Hash
-                                 ->  Seq Scan on prt1_p1 t1_1
-                                       Filter: (b = 0)
-         ->  Hash Right Join
-               Hash Cond: (((t3_2.a + t3_2.b) / 2) = t1_2.a)
-               ->  Seq Scan on prt1_e_p2 t3_2
-               ->  Hash
-                     ->  Hash Right Join
-                           Hash Cond: (t2_2.b = t1_2.a)
-                           ->  Seq Scan on prt2_p2 t2_2
-                           ->  Hash
-                                 ->  Seq Scan on prt1_p2 t1_2
-                                       Filter: (b = 0)
-         ->  Hash Right Join
-               Hash Cond: (((t3_3.a + t3_3.b) / 2) = t1_3.a)
-               ->  Seq Scan on prt1_e_p3 t3_3
-               ->  Hash
-                     ->  Hash Right Join
-                           Hash Cond: (t2_3.b = t1_3.a)
-                           ->  Seq Scan on prt2_p3 t2_3
-                           ->  Hash
-                                 ->  Seq Scan on prt1_p3 t1_3
-                                       Filter: (b = 0)
-(33 rows)
-
-SELECT t1.a, t1.c, t2.b, t2.c, t3.a + t3.b, t3.c FROM (prt1 t1 LEFT JOIN prt2 t2 ON t1.a = t2.b) LEFT JOIN prt1_e t3 ON (t1.a = (t3.a + t3.b)/2) WHERE t1.b = 0 ORDER BY t1.a, t2.b, t3.a + t3.b;
-  a  |  c   |  b  |  c   | ?column? | c 
------+------+-----+------+----------+---
-   0 | 0000 |   0 | 0000 |        0 | 0
-  50 | 0050 |     |      |      100 | 0
- 100 | 0100 |     |      |      200 | 0
- 150 | 0150 | 150 | 0150 |      300 | 0
- 200 | 0200 |     |      |      400 | 0
- 250 | 0250 |     |      |      500 | 0
- 300 | 0300 | 300 | 0300 |      600 | 0
- 350 | 0350 |     |      |      700 | 0
- 400 | 0400 |     |      |      800 | 0
- 450 | 0450 | 450 | 0450 |      900 | 0
- 500 | 0500 |     |      |     1000 | 0
- 550 | 0550 |     |      |     1100 | 0
-(12 rows)
-
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c, t3.a + t3.b, t3.c FROM (prt1 t1 LEFT JOIN prt2 t2 ON t1.a = t2.b) RIGHT JOIN prt1_e t3 ON (t1.a = (t3.a + t3.b)/2) WHERE t3.c = 0 ORDER BY t1.a, t2.b, t3.a + t3.b;
-                            QUERY PLAN                             
--------------------------------------------------------------------
- Sort
-   Sort Key: t1.a, t2.b, ((t3.a + t3.b))
-   ->  Append
-         ->  Nested Loop Left Join
-               ->  Hash Right Join
-                     Hash Cond: (t1_1.a = ((t3_1.a + t3_1.b) / 2))
-                     ->  Seq Scan on prt1_p1 t1_1
-                     ->  Hash
-                           ->  Seq Scan on prt1_e_p1 t3_1
-                                 Filter: (c = 0)
-               ->  Index Scan using iprt2_p1_b on prt2_p1 t2_1
-                     Index Cond: (b = t1_1.a)
-         ->  Nested Loop Left Join
-               ->  Hash Right Join
-                     Hash Cond: (t1_2.a = ((t3_2.a + t3_2.b) / 2))
-                     ->  Seq Scan on prt1_p2 t1_2
-                     ->  Hash
-                           ->  Seq Scan on prt1_e_p2 t3_2
-                                 Filter: (c = 0)
-               ->  Index Scan using iprt2_p2_b on prt2_p2 t2_2
-                     Index Cond: (b = t1_2.a)
-         ->  Nested Loop Left Join
-               ->  Hash Right Join
-                     Hash Cond: (t1_3.a = ((t3_3.a + t3_3.b) / 2))
-                     ->  Seq Scan on prt1_p3 t1_3
-                     ->  Hash
-                           ->  Seq Scan on prt1_e_p3 t3_3
-                                 Filter: (c = 0)
-               ->  Index Scan using iprt2_p3_b on prt2_p3 t2_3
-                     Index Cond: (b = t1_3.a)
-(30 rows)
-
-SELECT t1.a, t1.c, t2.b, t2.c, t3.a + t3.b, t3.c FROM (prt1 t1 LEFT JOIN prt2 t2 ON t1.a = t2.b) RIGHT JOIN prt1_e t3 ON (t1.a = (t3.a + t3.b)/2) WHERE t3.c = 0 ORDER BY t1.a, t2.b, t3.a + t3.b;
-  a  |  c   |  b  |  c   | ?column? | c 
------+------+-----+------+----------+---
-   0 | 0000 |   0 | 0000 |        0 | 0
-  50 | 0050 |     |      |      100 | 0
- 100 | 0100 |     |      |      200 | 0
- 150 | 0150 | 150 | 0150 |      300 | 0
- 200 | 0200 |     |      |      400 | 0
- 250 | 0250 |     |      |      500 | 0
- 300 | 0300 | 300 | 0300 |      600 | 0
- 350 | 0350 |     |      |      700 | 0
- 400 | 0400 |     |      |      800 | 0
- 450 | 0450 | 450 | 0450 |      900 | 0
- 500 | 0500 |     |      |     1000 | 0
- 550 | 0550 |     |      |     1100 | 0
-(12 rows)
-
---
--- 3-way full join
---
-EXPLAIN (COSTS OFF)
-SELECT COUNT(*) FROM prt1 FULL JOIN prt2 p2(b,a,c) USING(a,b) FULL JOIN prt2 p3(b,a,c) USING (a, b)
-  WHERE a BETWEEN 490 AND 510;
-                                                               QUERY PLAN                                                                
------------------------------------------------------------------------------------------------------------------------------------------
- Aggregate
-   ->  Append
-         ->  Hash Full Join
-               Hash Cond: ((COALESCE(prt1_1.a, p2_1.a) = p3_1.a) AND (COALESCE(prt1_1.b, p2_1.b) = p3_1.b))
-               Filter: ((COALESCE(COALESCE(prt1_1.a, p2_1.a), p3_1.a) >= 490) AND (COALESCE(COALESCE(prt1_1.a, p2_1.a), p3_1.a) <= 510))
-               ->  Hash Full Join
-                     Hash Cond: ((prt1_1.a = p2_1.a) AND (prt1_1.b = p2_1.b))
-                     ->  Seq Scan on prt1_p1 prt1_1
-                     ->  Hash
-                           ->  Seq Scan on prt2_p1 p2_1
-               ->  Hash
-                     ->  Seq Scan on prt2_p1 p3_1
-         ->  Hash Full Join
-               Hash Cond: ((COALESCE(prt1_2.a, p2_2.a) = p3_2.a) AND (COALESCE(prt1_2.b, p2_2.b) = p3_2.b))
-               Filter: ((COALESCE(COALESCE(prt1_2.a, p2_2.a), p3_2.a) >= 490) AND (COALESCE(COALESCE(prt1_2.a, p2_2.a), p3_2.a) <= 510))
-               ->  Hash Full Join
-                     Hash Cond: ((prt1_2.a = p2_2.a) AND (prt1_2.b = p2_2.b))
-                     ->  Seq Scan on prt1_p2 prt1_2
-                     ->  Hash
-                           ->  Seq Scan on prt2_p2 p2_2
-               ->  Hash
-                     ->  Seq Scan on prt2_p2 p3_2
-         ->  Hash Full Join
-               Hash Cond: ((COALESCE(prt1_3.a, p2_3.a) = p3_3.a) AND (COALESCE(prt1_3.b, p2_3.b) = p3_3.b))
-               Filter: ((COALESCE(COALESCE(prt1_3.a, p2_3.a), p3_3.a) >= 490) AND (COALESCE(COALESCE(prt1_3.a, p2_3.a), p3_3.a) <= 510))
-               ->  Hash Full Join
-                     Hash Cond: ((prt1_3.a = p2_3.a) AND (prt1_3.b = p2_3.b))
-                     ->  Seq Scan on prt1_p3 prt1_3
-                     ->  Hash
-                           ->  Seq Scan on prt2_p3 p2_3
-               ->  Hash
-                     ->  Seq Scan on prt2_p3 p3_3
-(32 rows)
-
-SELECT COUNT(*) FROM prt1 FULL JOIN prt2 p2(b,a,c) USING(a,b) FULL JOIN prt2 p3(b,a,c) USING (a, b)
-  WHERE a BETWEEN 490 AND 510;
- count 
--------
-    14
-(1 row)
-
---
--- 4-way full join
---
-EXPLAIN (COSTS OFF)
-SELECT COUNT(*) FROM prt1 FULL JOIN prt2 p2(b,a,c) USING(a,b) FULL JOIN prt2 p3(b,a,c) USING (a, b) FULL JOIN prt1 p4 (a,b,c) USING (a, b)
-  WHERE a BETWEEN 490 AND 510;
-                                                                                 QUERY PLAN                                                                                  
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
- Aggregate
-   ->  Append
-         ->  Hash Full Join
-               Hash Cond: ((COALESCE(COALESCE(prt1_1.a, p2_1.a), p3_1.a) = p4_1.a) AND (COALESCE(COALESCE(prt1_1.b, p2_1.b), p3_1.b) = p4_1.b))
-               Filter: ((COALESCE(COALESCE(COALESCE(prt1_1.a, p2_1.a), p3_1.a), p4_1.a) >= 490) AND (COALESCE(COALESCE(COALESCE(prt1_1.a, p2_1.a), p3_1.a), p4_1.a) <= 510))
-               ->  Hash Full Join
-                     Hash Cond: ((COALESCE(prt1_1.a, p2_1.a) = p3_1.a) AND (COALESCE(prt1_1.b, p2_1.b) = p3_1.b))
-                     ->  Hash Full Join
-                           Hash Cond: ((prt1_1.a = p2_1.a) AND (prt1_1.b = p2_1.b))
-                           ->  Seq Scan on prt1_p1 prt1_1
-                           ->  Hash
-                                 ->  Seq Scan on prt2_p1 p2_1
-                     ->  Hash
-                           ->  Seq Scan on prt2_p1 p3_1
-               ->  Hash
-                     ->  Seq Scan on prt1_p1 p4_1
-         ->  Hash Full Join
-               Hash Cond: ((COALESCE(COALESCE(prt1_2.a, p2_2.a), p3_2.a) = p4_2.a) AND (COALESCE(COALESCE(prt1_2.b, p2_2.b), p3_2.b) = p4_2.b))
-               Filter: ((COALESCE(COALESCE(COALESCE(prt1_2.a, p2_2.a), p3_2.a), p4_2.a) >= 490) AND (COALESCE(COALESCE(COALESCE(prt1_2.a, p2_2.a), p3_2.a), p4_2.a) <= 510))
-               ->  Hash Full Join
-                     Hash Cond: ((COALESCE(prt1_2.a, p2_2.a) = p3_2.a) AND (COALESCE(prt1_2.b, p2_2.b) = p3_2.b))
-                     ->  Hash Full Join
-                           Hash Cond: ((prt1_2.a = p2_2.a) AND (prt1_2.b = p2_2.b))
-                           ->  Seq Scan on prt1_p2 prt1_2
-                           ->  Hash
-                                 ->  Seq Scan on prt2_p2 p2_2
-                     ->  Hash
-                           ->  Seq Scan on prt2_p2 p3_2
-               ->  Hash
-                     ->  Seq Scan on prt1_p2 p4_2
-         ->  Hash Full Join
-               Hash Cond: ((COALESCE(COALESCE(prt1_3.a, p2_3.a), p3_3.a) = p4_3.a) AND (COALESCE(COALESCE(prt1_3.b, p2_3.b), p3_3.b) = p4_3.b))
-               Filter: ((COALESCE(COALESCE(COALESCE(prt1_3.a, p2_3.a), p3_3.a), p4_3.a) >= 490) AND (COALESCE(COALESCE(COALESCE(prt1_3.a, p2_3.a), p3_3.a), p4_3.a) <= 510))
-               ->  Hash Full Join
-                     Hash Cond: ((COALESCE(prt1_3.a, p2_3.a) = p3_3.a) AND (COALESCE(prt1_3.b, p2_3.b) = p3_3.b))
-                     ->  Hash Full Join
-                           Hash Cond: ((prt1_3.a = p2_3.a) AND (prt1_3.b = p2_3.b))
-                           ->  Seq Scan on prt1_p3 prt1_3
-                           ->  Hash
-                                 ->  Seq Scan on prt2_p3 p2_3
-                     ->  Hash
-                           ->  Seq Scan on prt2_p3 p3_3
-               ->  Hash
-                     ->  Seq Scan on prt1_p3 p4_3
-(44 rows)
-
-SELECT COUNT(*) FROM prt1 FULL JOIN prt2 p2(b,a,c) USING(a,b) FULL JOIN prt2 p3(b,a,c) USING (a, b) FULL JOIN prt1 p4 (a,b,c) USING (a, b)
-  WHERE a BETWEEN 490 AND 510;
- count 
--------
-    14
-(1 row)
-
--- Cases with non-nullable expressions in subquery results;
--- make sure these go to null as expected
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.phv, t2.b, t2.phv, t3.a + t3.b, t3.phv FROM ((SELECT 50 phv, * FROM prt1 WHERE prt1.b = 0) t1 FULL JOIN (SELECT 75 phv, * FROM prt2 WHERE prt2.a = 0) t2 ON (t1.a = t2.b)) FULL JOIN (SELECT 50 phv, * FROM prt1_e WHERE prt1_e.c = 0) t3 ON (t1.a = (t3.a + t3.b)/2) WHERE t1.a = t1.phv OR t2.b = t2.phv OR (t3.a + t3.b)/2 = t3.phv ORDER BY t1.a, t2.b, t3.a + t3.b;
-                                                 QUERY PLAN                                                 
-------------------------------------------------------------------------------------------------------------
- Sort
-   Sort Key: prt1.a, prt2.b, ((prt1_e.a + prt1_e.b))
-   ->  Append
-         ->  Hash Full Join
-               Hash Cond: (prt1_1.a = ((prt1_e_1.a + prt1_e_1.b) / 2))
-               Filter: ((prt1_1.a = (50)) OR (prt2_1.b = (75)) OR (((prt1_e_1.a + prt1_e_1.b) / 2) = (50)))
-               ->  Hash Full Join
-                     Hash Cond: (prt1_1.a = prt2_1.b)
-                     ->  Seq Scan on prt1_p1 prt1_1
-                           Filter: (b = 0)
-                     ->  Hash
-                           ->  Seq Scan on prt2_p1 prt2_1
-                                 Filter: (a = 0)
-               ->  Hash
-                     ->  Seq Scan on prt1_e_p1 prt1_e_1
-                           Filter: (c = 0)
-         ->  Hash Full Join
-               Hash Cond: (prt1_2.a = ((prt1_e_2.a + prt1_e_2.b) / 2))
-               Filter: ((prt1_2.a = (50)) OR (prt2_2.b = (75)) OR (((prt1_e_2.a + prt1_e_2.b) / 2) = (50)))
-               ->  Hash Full Join
-                     Hash Cond: (prt1_2.a = prt2_2.b)
-                     ->  Seq Scan on prt1_p2 prt1_2
-                           Filter: (b = 0)
-                     ->  Hash
-                           ->  Seq Scan on prt2_p2 prt2_2
-                                 Filter: (a = 0)
-               ->  Hash
-                     ->  Seq Scan on prt1_e_p2 prt1_e_2
-                           Filter: (c = 0)
-         ->  Hash Full Join
-               Hash Cond: (prt1_3.a = ((prt1_e_3.a + prt1_e_3.b) / 2))
-               Filter: ((prt1_3.a = (50)) OR (prt2_3.b = (75)) OR (((prt1_e_3.a + prt1_e_3.b) / 2) = (50)))
-               ->  Hash Full Join
-                     Hash Cond: (prt1_3.a = prt2_3.b)
-                     ->  Seq Scan on prt1_p3 prt1_3
-                           Filter: (b = 0)
-                     ->  Hash
-                           ->  Seq Scan on prt2_p3 prt2_3
-                                 Filter: (a = 0)
-               ->  Hash
-                     ->  Seq Scan on prt1_e_p3 prt1_e_3
-                           Filter: (c = 0)
-(42 rows)
-
-SELECT t1.a, t1.phv, t2.b, t2.phv, t3.a + t3.b, t3.phv FROM ((SELECT 50 phv, * FROM prt1 WHERE prt1.b = 0) t1 FULL JOIN (SELECT 75 phv, * FROM prt2 WHERE prt2.a = 0) t2 ON (t1.a = t2.b)) FULL JOIN (SELECT 50 phv, * FROM prt1_e WHERE prt1_e.c = 0) t3 ON (t1.a = (t3.a + t3.b)/2) WHERE t1.a = t1.phv OR t2.b = t2.phv OR (t3.a + t3.b)/2 = t3.phv ORDER BY t1.a, t2.b, t3.a + t3.b;
- a  | phv | b  | phv | ?column? | phv 
-----+-----+----+-----+----------+-----
- 50 |  50 |    |     |      100 |  50
-    |     | 75 |  75 |          |    
-(2 rows)
-
--- Semi-join
-EXPLAIN (COSTS OFF)
-SELECT t1.* FROM prt1 t1 WHERE t1.a IN (SELECT t1.b FROM prt2 t1, prt1_e t2 WHERE t1.a = 0 AND t1.b = (t2.a + t2.b)/2) AND t1.b = 0 ORDER BY t1.a;
-                                   QUERY PLAN                                    
----------------------------------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Nested Loop
-               Join Filter: (t1_2.a = t1_5.b)
-               ->  HashAggregate
-                     Group Key: t1_5.b
-                     ->  Hash Join
-                           Hash Cond: (((t2_1.a + t2_1.b) / 2) = t1_5.b)
-                           ->  Seq Scan on prt1_e_p1 t2_1
-                           ->  Hash
-                                 ->  Seq Scan on prt2_p1 t1_5
-                                       Filter: (a = 0)
-               ->  Index Scan using iprt1_p1_a on prt1_p1 t1_2
-                     Index Cond: (a = ((t2_1.a + t2_1.b) / 2))
-                     Filter: (b = 0)
-         ->  Nested Loop
-               Join Filter: (t1_3.a = t1_6.b)
-               ->  HashAggregate
-                     Group Key: t1_6.b
-                     ->  Hash Join
-                           Hash Cond: (((t2_2.a + t2_2.b) / 2) = t1_6.b)
-                           ->  Seq Scan on prt1_e_p2 t2_2
-                           ->  Hash
-                                 ->  Seq Scan on prt2_p2 t1_6
-                                       Filter: (a = 0)
-               ->  Index Scan using iprt1_p2_a on prt1_p2 t1_3
-                     Index Cond: (a = ((t2_2.a + t2_2.b) / 2))
-                     Filter: (b = 0)
-         ->  Nested Loop
-               Join Filter: (t1_4.a = t1_7.b)
-               ->  HashAggregate
-                     Group Key: t1_7.b
-                     ->  Nested Loop
-                           ->  Seq Scan on prt2_p3 t1_7
-                                 Filter: (a = 0)
-                           ->  Index Scan using iprt1_e_p3_ab2 on prt1_e_p3 t2_3
-                                 Index Cond: (((a + b) / 2) = t1_7.b)
-               ->  Index Scan using iprt1_p3_a on prt1_p3 t1_4
-                     Index Cond: (a = ((t2_3.a + t2_3.b) / 2))
-                     Filter: (b = 0)
-(41 rows)
-
-SELECT t1.* FROM prt1 t1 WHERE t1.a IN (SELECT t1.b FROM prt2 t1, prt1_e t2 WHERE t1.a = 0 AND t1.b = (t2.a + t2.b)/2) AND t1.b = 0 ORDER BY t1.a;
-  a  | b |  c   
------+---+------
-   0 | 0 | 0000
- 150 | 0 | 0150
- 300 | 0 | 0300
- 450 | 0 | 0450
-(4 rows)
-
-EXPLAIN (COSTS OFF)
-SELECT t1.* FROM prt1 t1 WHERE t1.a IN (SELECT t1.b FROM prt2 t1 WHERE t1.b IN (SELECT (t1.a + t1.b)/2 FROM prt1_e t1 WHERE t1.c = 0)) AND t1.b = 0 ORDER BY t1.a;
-                                QUERY PLAN                                 
----------------------------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Nested Loop
-               ->  HashAggregate
-                     Group Key: t1_6.b
-                     ->  Hash Semi Join
-                           Hash Cond: (t1_6.b = ((t1_9.a + t1_9.b) / 2))
-                           ->  Seq Scan on prt2_p1 t1_6
-                           ->  Hash
-                                 ->  Seq Scan on prt1_e_p1 t1_9
-                                       Filter: (c = 0)
-               ->  Index Scan using iprt1_p1_a on prt1_p1 t1_3
-                     Index Cond: (a = t1_6.b)
-                     Filter: (b = 0)
-         ->  Nested Loop
-               ->  HashAggregate
-                     Group Key: t1_7.b
-                     ->  Hash Semi Join
-                           Hash Cond: (t1_7.b = ((t1_10.a + t1_10.b) / 2))
-                           ->  Seq Scan on prt2_p2 t1_7
-                           ->  Hash
-                                 ->  Seq Scan on prt1_e_p2 t1_10
-                                       Filter: (c = 0)
-               ->  Index Scan using iprt1_p2_a on prt1_p2 t1_4
-                     Index Cond: (a = t1_7.b)
-                     Filter: (b = 0)
-         ->  Nested Loop
-               ->  HashAggregate
-                     Group Key: t1_8.b
-                     ->  Hash Semi Join
-                           Hash Cond: (t1_8.b = ((t1_11.a + t1_11.b) / 2))
-                           ->  Seq Scan on prt2_p3 t1_8
-                           ->  Hash
-                                 ->  Seq Scan on prt1_e_p3 t1_11
-                                       Filter: (c = 0)
-               ->  Index Scan using iprt1_p3_a on prt1_p3 t1_5
-                     Index Cond: (a = t1_8.b)
-                     Filter: (b = 0)
-(39 rows)
-
-SELECT t1.* FROM prt1 t1 WHERE t1.a IN (SELECT t1.b FROM prt2 t1 WHERE t1.b IN (SELECT (t1.a + t1.b)/2 FROM prt1_e t1 WHERE t1.c = 0)) AND t1.b = 0 ORDER BY t1.a;
-  a  | b |  c   
------+---+------
-   0 | 0 | 0000
- 150 | 0 | 0150
- 300 | 0 | 0300
- 450 | 0 | 0450
-(4 rows)
-
--- test merge joins
-SET enable_hashjoin TO off;
-SET enable_nestloop TO off;
-EXPLAIN (COSTS OFF)
-SELECT t1.* FROM prt1 t1 WHERE t1.a IN (SELECT t1.b FROM prt2 t1 WHERE t1.b IN (SELECT (t1.a + t1.b)/2 FROM prt1_e t1 WHERE t1.c = 0)) AND t1.b = 0 ORDER BY t1.a;
-                            QUERY PLAN                            
-------------------------------------------------------------------
- Merge Append
-   Sort Key: t1.a
-   ->  Merge Semi Join
-         Merge Cond: (t1_3.a = t1_6.b)
-         ->  Sort
-               Sort Key: t1_3.a
-               ->  Seq Scan on prt1_p1 t1_3
-                     Filter: (b = 0)
-         ->  Merge Semi Join
-               Merge Cond: (t1_6.b = (((t1_9.a + t1_9.b) / 2)))
-               ->  Sort
-                     Sort Key: t1_6.b
-                     ->  Seq Scan on prt2_p1 t1_6
-               ->  Sort
-                     Sort Key: (((t1_9.a + t1_9.b) / 2))
-                     ->  Seq Scan on prt1_e_p1 t1_9
-                           Filter: (c = 0)
-   ->  Merge Semi Join
-         Merge Cond: (t1_4.a = t1_7.b)
-         ->  Sort
-               Sort Key: t1_4.a
-               ->  Seq Scan on prt1_p2 t1_4
-                     Filter: (b = 0)
-         ->  Merge Semi Join
-               Merge Cond: (t1_7.b = (((t1_10.a + t1_10.b) / 2)))
-               ->  Sort
-                     Sort Key: t1_7.b
-                     ->  Seq Scan on prt2_p2 t1_7
-               ->  Sort
-                     Sort Key: (((t1_10.a + t1_10.b) / 2))
-                     ->  Seq Scan on prt1_e_p2 t1_10
-                           Filter: (c = 0)
-   ->  Merge Semi Join
-         Merge Cond: (t1_5.a = t1_8.b)
-         ->  Sort
-               Sort Key: t1_5.a
-               ->  Seq Scan on prt1_p3 t1_5
-                     Filter: (b = 0)
-         ->  Merge Semi Join
-               Merge Cond: (t1_8.b = (((t1_11.a + t1_11.b) / 2)))
-               ->  Sort
-                     Sort Key: t1_8.b
-                     ->  Seq Scan on prt2_p3 t1_8
-               ->  Sort
-                     Sort Key: (((t1_11.a + t1_11.b) / 2))
-                     ->  Seq Scan on prt1_e_p3 t1_11
-                           Filter: (c = 0)
-(47 rows)
-
-SELECT t1.* FROM prt1 t1 WHERE t1.a IN (SELECT t1.b FROM prt2 t1 WHERE t1.b IN (SELECT (t1.a + t1.b)/2 FROM prt1_e t1 WHERE t1.c = 0)) AND t1.b = 0 ORDER BY t1.a;
-  a  | b |  c   
------+---+------
-   0 | 0 | 0000
- 150 | 0 | 0150
- 300 | 0 | 0300
- 450 | 0 | 0450
-(4 rows)
-
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c, t3.a + t3.b, t3.c FROM (prt1 t1 LEFT JOIN prt2 t2 ON t1.a = t2.b) RIGHT JOIN prt1_e t3 ON (t1.a = (t3.a + t3.b)/2) WHERE t3.c = 0 ORDER BY t1.a, t2.b, t3.a + t3.b;
-                                 QUERY PLAN                                 
-----------------------------------------------------------------------------
- Sort
-   Sort Key: t1.a, t2.b, ((t3.a + t3.b))
-   ->  Append
-         ->  Merge Left Join
-               Merge Cond: (t1_1.a = t2_1.b)
-               ->  Sort
-                     Sort Key: t1_1.a
-                     ->  Merge Left Join
-                           Merge Cond: ((((t3_1.a + t3_1.b) / 2)) = t1_1.a)
-                           ->  Sort
-                                 Sort Key: (((t3_1.a + t3_1.b) / 2))
-                                 ->  Seq Scan on prt1_e_p1 t3_1
-                                       Filter: (c = 0)
-                           ->  Sort
-                                 Sort Key: t1_1.a
-                                 ->  Seq Scan on prt1_p1 t1_1
-               ->  Sort
-                     Sort Key: t2_1.b
-                     ->  Seq Scan on prt2_p1 t2_1
-         ->  Merge Left Join
-               Merge Cond: (t1_2.a = t2_2.b)
-               ->  Sort
-                     Sort Key: t1_2.a
-                     ->  Merge Left Join
-                           Merge Cond: ((((t3_2.a + t3_2.b) / 2)) = t1_2.a)
-                           ->  Sort
-                                 Sort Key: (((t3_2.a + t3_2.b) / 2))
-                                 ->  Seq Scan on prt1_e_p2 t3_2
-                                       Filter: (c = 0)
-                           ->  Sort
-                                 Sort Key: t1_2.a
-                                 ->  Seq Scan on prt1_p2 t1_2
-               ->  Sort
-                     Sort Key: t2_2.b
-                     ->  Seq Scan on prt2_p2 t2_2
-         ->  Merge Left Join
-               Merge Cond: (t1_3.a = t2_3.b)
-               ->  Sort
-                     Sort Key: t1_3.a
-                     ->  Merge Left Join
-                           Merge Cond: ((((t3_3.a + t3_3.b) / 2)) = t1_3.a)
-                           ->  Sort
-                                 Sort Key: (((t3_3.a + t3_3.b) / 2))
-                                 ->  Seq Scan on prt1_e_p3 t3_3
-                                       Filter: (c = 0)
-                           ->  Sort
-                                 Sort Key: t1_3.a
-                                 ->  Seq Scan on prt1_p3 t1_3
-               ->  Sort
-                     Sort Key: t2_3.b
-                     ->  Seq Scan on prt2_p3 t2_3
-(51 rows)
-
-SELECT t1.a, t1.c, t2.b, t2.c, t3.a + t3.b, t3.c FROM (prt1 t1 LEFT JOIN prt2 t2 ON t1.a = t2.b) RIGHT JOIN prt1_e t3 ON (t1.a = (t3.a + t3.b)/2) WHERE t3.c = 0 ORDER BY t1.a, t2.b, t3.a + t3.b;
-  a  |  c   |  b  |  c   | ?column? | c 
------+------+-----+------+----------+---
-   0 | 0000 |   0 | 0000 |        0 | 0
-  50 | 0050 |     |      |      100 | 0
- 100 | 0100 |     |      |      200 | 0
- 150 | 0150 | 150 | 0150 |      300 | 0
- 200 | 0200 |     |      |      400 | 0
- 250 | 0250 |     |      |      500 | 0
- 300 | 0300 | 300 | 0300 |      600 | 0
- 350 | 0350 |     |      |      700 | 0
- 400 | 0400 |     |      |      800 | 0
- 450 | 0450 | 450 | 0450 |      900 | 0
- 500 | 0500 |     |      |     1000 | 0
- 550 | 0550 |     |      |     1100 | 0
-(12 rows)
-
--- MergeAppend on nullable column
--- This should generate a partitionwise join, but currently fails to
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t2.b FROM (SELECT * FROM prt1 WHERE a < 450) t1 LEFT JOIN (SELECT * FROM prt2 WHERE b > 250) t2 ON t1.a = t2.b WHERE t1.b = 0 ORDER BY t1.a, t2.b;
-                        QUERY PLAN                         
------------------------------------------------------------
- Incremental Sort
-   Sort Key: prt1.a, prt2.b
-   Presorted Key: prt1.a
-   ->  Merge Left Join
-         Merge Cond: (prt1.a = prt2.b)
-         ->  Sort
-               Sort Key: prt1.a
-               ->  Append
-                     ->  Seq Scan on prt1_p1 prt1_1
-                           Filter: ((a < 450) AND (b = 0))
-                     ->  Seq Scan on prt1_p2 prt1_2
-                           Filter: ((a < 450) AND (b = 0))
-         ->  Sort
-               Sort Key: prt2.b
-               ->  Append
-                     ->  Seq Scan on prt2_p2 prt2_1
-                           Filter: (b > 250)
-                     ->  Seq Scan on prt2_p3 prt2_2
-                           Filter: (b > 250)
-(19 rows)
-
-SELECT t1.a, t2.b FROM (SELECT * FROM prt1 WHERE a < 450) t1 LEFT JOIN (SELECT * FROM prt2 WHERE b > 250) t2 ON t1.a = t2.b WHERE t1.b = 0 ORDER BY t1.a, t2.b;
-  a  |  b  
------+-----
-   0 |    
-  50 |    
- 100 |    
- 150 |    
- 200 |    
- 250 |    
- 300 | 300
- 350 |    
- 400 |    
-(9 rows)
-
--- merge join when expression with whole-row reference needs to be sorted;
--- partitionwise join does not apply
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t2.b FROM prt1 t1, prt2 t2 WHERE t1::text = t2::text AND t1.a = t2.b ORDER BY t1.a;
-                                       QUERY PLAN                                        
------------------------------------------------------------------------------------------
- Merge Join
-   Merge Cond: ((t1.a = t2.b) AND (((((t1.*)::prt1))::text) = ((((t2.*)::prt2))::text)))
-   ->  Sort
-         Sort Key: t1.a, ((((t1.*)::prt1))::text)
-         ->  Result
-               ->  Append
-                     ->  Seq Scan on prt1_p1 t1_1
-                     ->  Seq Scan on prt1_p2 t1_2
-                     ->  Seq Scan on prt1_p3 t1_3
-   ->  Sort
-         Sort Key: t2.b, ((((t2.*)::prt2))::text)
-         ->  Result
-               ->  Append
-                     ->  Seq Scan on prt2_p1 t2_1
-                     ->  Seq Scan on prt2_p2 t2_2
-                     ->  Seq Scan on prt2_p3 t2_3
-(16 rows)
-
-SELECT t1.a, t2.b FROM prt1 t1, prt2 t2 WHERE t1::text = t2::text AND t1.a = t2.b ORDER BY t1.a;
- a  | b  
-----+----
-  0 |  0
-  6 |  6
- 12 | 12
- 18 | 18
- 24 | 24
-(5 rows)
-
-RESET enable_hashjoin;
-RESET enable_nestloop;
---
--- partitioned by multiple columns
---
-CREATE TABLE prt1_m (a int, b int, c int) PARTITION BY RANGE(a, ((a + b)/2));
-CREATE TABLE prt1_m_p1 PARTITION OF prt1_m FOR VALUES FROM (0, 0) TO (250, 250);
-CREATE TABLE prt1_m_p2 PARTITION OF prt1_m FOR VALUES FROM (250, 250) TO (500, 500);
-CREATE TABLE prt1_m_p3 PARTITION OF prt1_m FOR VALUES FROM (500, 500) TO (600, 600);
-INSERT INTO prt1_m SELECT i, i, i % 25 FROM generate_series(0, 599, 2) i;
-ANALYZE prt1_m;
-CREATE TABLE prt2_m (a int, b int, c int) PARTITION BY RANGE(((b + a)/2), b);
-CREATE TABLE prt2_m_p1 PARTITION OF prt2_m FOR VALUES FROM (0, 0) TO (250, 250);
-CREATE TABLE prt2_m_p2 PARTITION OF prt2_m FOR VALUES FROM (250, 250) TO (500, 500);
-CREATE TABLE prt2_m_p3 PARTITION OF prt2_m FOR VALUES FROM (500, 500) TO (600, 600);
-INSERT INTO prt2_m SELECT i, i, i % 25 FROM generate_series(0, 599, 3) i;
-ANALYZE prt2_m;
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM (SELECT * FROM prt1_m WHERE prt1_m.c = 0) t1 FULL JOIN (SELECT * FROM prt2_m WHERE prt2_m.c = 0) t2 ON (t1.a = (t2.b + t2.a)/2 AND t2.b = (t1.a + t1.b)/2) ORDER BY t1.a, t2.b;
-                                                          QUERY PLAN                                                          
-------------------------------------------------------------------------------------------------------------------------------
- Sort
-   Sort Key: prt1_m.a, prt2_m.b
-   ->  Append
-         ->  Hash Full Join
-               Hash Cond: ((prt1_m_1.a = ((prt2_m_1.b + prt2_m_1.a) / 2)) AND (((prt1_m_1.a + prt1_m_1.b) / 2) = prt2_m_1.b))
-               ->  Seq Scan on prt1_m_p1 prt1_m_1
-                     Filter: (c = 0)
-               ->  Hash
-                     ->  Seq Scan on prt2_m_p1 prt2_m_1
-                           Filter: (c = 0)
-         ->  Hash Full Join
-               Hash Cond: ((prt1_m_2.a = ((prt2_m_2.b + prt2_m_2.a) / 2)) AND (((prt1_m_2.a + prt1_m_2.b) / 2) = prt2_m_2.b))
-               ->  Seq Scan on prt1_m_p2 prt1_m_2
-                     Filter: (c = 0)
-               ->  Hash
-                     ->  Seq Scan on prt2_m_p2 prt2_m_2
-                           Filter: (c = 0)
-         ->  Hash Full Join
-               Hash Cond: ((prt1_m_3.a = ((prt2_m_3.b + prt2_m_3.a) / 2)) AND (((prt1_m_3.a + prt1_m_3.b) / 2) = prt2_m_3.b))
-               ->  Seq Scan on prt1_m_p3 prt1_m_3
-                     Filter: (c = 0)
-               ->  Hash
-                     ->  Seq Scan on prt2_m_p3 prt2_m_3
-                           Filter: (c = 0)
-(24 rows)
-
-SELECT t1.a, t1.c, t2.b, t2.c FROM (SELECT * FROM prt1_m WHERE prt1_m.c = 0) t1 FULL JOIN (SELECT * FROM prt2_m WHERE prt2_m.c = 0) t2 ON (t1.a = (t2.b + t2.a)/2 AND t2.b = (t1.a + t1.b)/2) ORDER BY t1.a, t2.b;
-  a  | c |  b  | c 
------+---+-----+---
-   0 | 0 |   0 | 0
-  50 | 0 |     |  
- 100 | 0 |     |  
- 150 | 0 | 150 | 0
- 200 | 0 |     |  
- 250 | 0 |     |  
- 300 | 0 | 300 | 0
- 350 | 0 |     |  
- 400 | 0 |     |  
- 450 | 0 | 450 | 0
- 500 | 0 |     |  
- 550 | 0 |     |  
-     |   |  75 | 0
-     |   | 225 | 0
-     |   | 375 | 0
-     |   | 525 | 0
-(16 rows)
-
---
--- tests for list partitioned tables.
---
-CREATE TABLE plt1 (a int, b int, c text) PARTITION BY LIST(c);
-CREATE TABLE plt1_p1 PARTITION OF plt1 FOR VALUES IN ('0000', '0003', '0004', '0010');
-CREATE TABLE plt1_p2 PARTITION OF plt1 FOR VALUES IN ('0001', '0005', '0002', '0009');
-CREATE TABLE plt1_p3 PARTITION OF plt1 FOR VALUES IN ('0006', '0007', '0008', '0011');
-INSERT INTO plt1 SELECT i, i, to_char(i/50, 'FM0000') FROM generate_series(0, 599, 2) i;
-ANALYZE plt1;
-CREATE TABLE plt2 (a int, b int, c text) PARTITION BY LIST(c);
-CREATE TABLE plt2_p1 PARTITION OF plt2 FOR VALUES IN ('0000', '0003', '0004', '0010');
-CREATE TABLE plt2_p2 PARTITION OF plt2 FOR VALUES IN ('0001', '0005', '0002', '0009');
-CREATE TABLE plt2_p3 PARTITION OF plt2 FOR VALUES IN ('0006', '0007', '0008', '0011');
-INSERT INTO plt2 SELECT i, i, to_char(i/50, 'FM0000') FROM generate_series(0, 599, 3) i;
-ANALYZE plt2;
---
--- list partitioned by expression
---
-CREATE TABLE plt1_e (a int, b int, c text) PARTITION BY LIST(ltrim(c, 'A'));
-CREATE TABLE plt1_e_p1 PARTITION OF plt1_e FOR VALUES IN ('0000', '0003', '0004', '0010');
-CREATE TABLE plt1_e_p2 PARTITION OF plt1_e FOR VALUES IN ('0001', '0005', '0002', '0009');
-CREATE TABLE plt1_e_p3 PARTITION OF plt1_e FOR VALUES IN ('0006', '0007', '0008', '0011');
-INSERT INTO plt1_e SELECT i, i, 'A' || to_char(i/50, 'FM0000') FROM generate_series(0, 599, 2) i;
-ANALYZE plt1_e;
--- test partition matching with N-way join
-EXPLAIN (COSTS OFF)
-SELECT avg(t1.a), avg(t2.b), avg(t3.a + t3.b), t1.c, t2.c, t3.c FROM plt1 t1, plt2 t2, plt1_e t3 WHERE t1.b = t2.b AND t1.c = t2.c AND ltrim(t3.c, 'A') = t1.c GROUP BY t1.c, t2.c, t3.c ORDER BY t1.c, t2.c, t3.c;
-                                   QUERY PLAN                                   
---------------------------------------------------------------------------------
- GroupAggregate
-   Group Key: t1.c, t3.c
-   ->  Sort
-         Sort Key: t1.c, t3.c
-         ->  Append
-               ->  Hash Join
-                     Hash Cond: (t1_1.c = ltrim(t3_1.c, 'A'::text))
-                     ->  Hash Join
-                           Hash Cond: ((t1_1.b = t2_1.b) AND (t1_1.c = t2_1.c))
-                           ->  Seq Scan on plt1_p1 t1_1
-                           ->  Hash
-                                 ->  Seq Scan on plt2_p1 t2_1
-                     ->  Hash
-                           ->  Seq Scan on plt1_e_p1 t3_1
-               ->  Hash Join
-                     Hash Cond: (t1_2.c = ltrim(t3_2.c, 'A'::text))
-                     ->  Hash Join
-                           Hash Cond: ((t1_2.b = t2_2.b) AND (t1_2.c = t2_2.c))
-                           ->  Seq Scan on plt1_p2 t1_2
-                           ->  Hash
-                                 ->  Seq Scan on plt2_p2 t2_2
-                     ->  Hash
-                           ->  Seq Scan on plt1_e_p2 t3_2
-               ->  Hash Join
-                     Hash Cond: (t1_3.c = ltrim(t3_3.c, 'A'::text))
-                     ->  Hash Join
-                           Hash Cond: ((t1_3.b = t2_3.b) AND (t1_3.c = t2_3.c))
-                           ->  Seq Scan on plt1_p3 t1_3
-                           ->  Hash
-                                 ->  Seq Scan on plt2_p3 t2_3
-                     ->  Hash
-                           ->  Seq Scan on plt1_e_p3 t3_3
-(32 rows)
-
-SELECT avg(t1.a), avg(t2.b), avg(t3.a + t3.b), t1.c, t2.c, t3.c FROM plt1 t1, plt2 t2, plt1_e t3 WHERE t1.b = t2.b AND t1.c = t2.c AND ltrim(t3.c, 'A') = t1.c GROUP BY t1.c, t2.c, t3.c ORDER BY t1.c, t2.c, t3.c;
-         avg          |         avg          |          avg          |  c   |  c   |   c   
-----------------------+----------------------+-----------------------+------+------+-------
-  24.0000000000000000 |  24.0000000000000000 |   48.0000000000000000 | 0000 | 0000 | A0000
-  75.0000000000000000 |  75.0000000000000000 |  148.0000000000000000 | 0001 | 0001 | A0001
- 123.0000000000000000 | 123.0000000000000000 |  248.0000000000000000 | 0002 | 0002 | A0002
- 174.0000000000000000 | 174.0000000000000000 |  348.0000000000000000 | 0003 | 0003 | A0003
- 225.0000000000000000 | 225.0000000000000000 |  448.0000000000000000 | 0004 | 0004 | A0004
- 273.0000000000000000 | 273.0000000000000000 |  548.0000000000000000 | 0005 | 0005 | A0005
- 324.0000000000000000 | 324.0000000000000000 |  648.0000000000000000 | 0006 | 0006 | A0006
- 375.0000000000000000 | 375.0000000000000000 |  748.0000000000000000 | 0007 | 0007 | A0007
- 423.0000000000000000 | 423.0000000000000000 |  848.0000000000000000 | 0008 | 0008 | A0008
- 474.0000000000000000 | 474.0000000000000000 |  948.0000000000000000 | 0009 | 0009 | A0009
- 525.0000000000000000 | 525.0000000000000000 | 1048.0000000000000000 | 0010 | 0010 | A0010
- 573.0000000000000000 | 573.0000000000000000 | 1148.0000000000000000 | 0011 | 0011 | A0011
-(12 rows)
-
--- joins where one of the relations is proven empty
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1 t1, prt2 t2 WHERE t1.a = t2.b AND t1.a = 1 AND t1.a = 2;
-        QUERY PLAN        
---------------------------
- Result
-   One-Time Filter: false
-(2 rows)
-
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM (SELECT * FROM prt1 WHERE a = 1 AND a = 2) t1 LEFT JOIN prt2 t2 ON t1.a = t2.b;
-        QUERY PLAN        
---------------------------
- Result
-   One-Time Filter: false
-(2 rows)
-
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM (SELECT * FROM prt1 WHERE a = 1 AND a = 2) t1 RIGHT JOIN prt2 t2 ON t1.a = t2.b, prt1 t3 WHERE t2.b = t3.a;
-                    QUERY PLAN                    
---------------------------------------------------
- Hash Left Join
-   Hash Cond: (t2.b = a)
-   ->  Append
-         ->  Hash Join
-               Hash Cond: (t3_1.a = t2_1.b)
-               ->  Seq Scan on prt1_p1 t3_1
-               ->  Hash
-                     ->  Seq Scan on prt2_p1 t2_1
-         ->  Hash Join
-               Hash Cond: (t3_2.a = t2_2.b)
-               ->  Seq Scan on prt1_p2 t3_2
-               ->  Hash
-                     ->  Seq Scan on prt2_p2 t2_2
-         ->  Hash Join
-               Hash Cond: (t3_3.a = t2_3.b)
-               ->  Seq Scan on prt1_p3 t3_3
-               ->  Hash
-                     ->  Seq Scan on prt2_p3 t2_3
-   ->  Hash
-         ->  Result
-               One-Time Filter: false
-(21 rows)
-
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM (SELECT * FROM prt1 WHERE a = 1 AND a = 2) t1 FULL JOIN prt2 t2 ON t1.a = t2.b WHERE t2.a = 0 ORDER BY t1.a, t2.b;
-                 QUERY PLAN                 
---------------------------------------------
- Sort
-   Sort Key: a, t2.b
-   ->  Hash Left Join
-         Hash Cond: (t2.b = a)
-         ->  Append
-               ->  Seq Scan on prt2_p1 t2_1
-                     Filter: (a = 0)
-               ->  Seq Scan on prt2_p2 t2_2
-                     Filter: (a = 0)
-               ->  Seq Scan on prt2_p3 t2_3
-                     Filter: (a = 0)
-         ->  Hash
-               ->  Result
-                     One-Time Filter: false
-(14 rows)
-
---
--- tests for hash partitioned tables.
---
-CREATE TABLE pht1 (a int, b int, c text) PARTITION BY HASH(c);
-CREATE TABLE pht1_p1 PARTITION OF pht1 FOR VALUES WITH (MODULUS 3, REMAINDER 0);
-CREATE TABLE pht1_p2 PARTITION OF pht1 FOR VALUES WITH (MODULUS 3, REMAINDER 1);
-CREATE TABLE pht1_p3 PARTITION OF pht1 FOR VALUES WITH (MODULUS 3, REMAINDER 2);
-INSERT INTO pht1 SELECT i, i, to_char(i/50, 'FM0000') FROM generate_series(0, 599, 2) i;
-ANALYZE pht1;
-CREATE TABLE pht2 (a int, b int, c text) PARTITION BY HASH(c);
-CREATE TABLE pht2_p1 PARTITION OF pht2 FOR VALUES WITH (MODULUS 3, REMAINDER 0);
-CREATE TABLE pht2_p2 PARTITION OF pht2 FOR VALUES WITH (MODULUS 3, REMAINDER 1);
-CREATE TABLE pht2_p3 PARTITION OF pht2 FOR VALUES WITH (MODULUS 3, REMAINDER 2);
-INSERT INTO pht2 SELECT i, i, to_char(i/50, 'FM0000') FROM generate_series(0, 599, 3) i;
-ANALYZE pht2;
---
--- hash partitioned by expression
---
-CREATE TABLE pht1_e (a int, b int, c text) PARTITION BY HASH(ltrim(c, 'A'));
-CREATE TABLE pht1_e_p1 PARTITION OF pht1_e FOR VALUES WITH (MODULUS 3, REMAINDER 0);
-CREATE TABLE pht1_e_p2 PARTITION OF pht1_e FOR VALUES WITH (MODULUS 3, REMAINDER 1);
-CREATE TABLE pht1_e_p3 PARTITION OF pht1_e FOR VALUES WITH (MODULUS 3, REMAINDER 2);
-INSERT INTO pht1_e SELECT i, i, 'A' || to_char(i/50, 'FM0000') FROM generate_series(0, 299, 2) i;
-ANALYZE pht1_e;
--- test partition matching with N-way join
-EXPLAIN (COSTS OFF)
-SELECT avg(t1.a), avg(t2.b), avg(t3.a + t3.b), t1.c, t2.c, t3.c FROM pht1 t1, pht2 t2, pht1_e t3 WHERE t1.b = t2.b AND t1.c = t2.c AND ltrim(t3.c, 'A') = t1.c GROUP BY t1.c, t2.c, t3.c ORDER BY t1.c, t2.c, t3.c;
-                                   QUERY PLAN                                   
---------------------------------------------------------------------------------
- GroupAggregate
-   Group Key: t1.c, t3.c
-   ->  Sort
-         Sort Key: t1.c, t3.c
-         ->  Append
-               ->  Hash Join
-                     Hash Cond: (t1_1.c = ltrim(t3_1.c, 'A'::text))
-                     ->  Hash Join
-                           Hash Cond: ((t1_1.b = t2_1.b) AND (t1_1.c = t2_1.c))
-                           ->  Seq Scan on pht1_p1 t1_1
-                           ->  Hash
-                                 ->  Seq Scan on pht2_p1 t2_1
-                     ->  Hash
-                           ->  Seq Scan on pht1_e_p1 t3_1
-               ->  Hash Join
-                     Hash Cond: (t1_2.c = ltrim(t3_2.c, 'A'::text))
-                     ->  Hash Join
-                           Hash Cond: ((t1_2.b = t2_2.b) AND (t1_2.c = t2_2.c))
-                           ->  Seq Scan on pht1_p2 t1_2
-                           ->  Hash
-                                 ->  Seq Scan on pht2_p2 t2_2
-                     ->  Hash
-                           ->  Seq Scan on pht1_e_p2 t3_2
-               ->  Hash Join
-                     Hash Cond: (t1_3.c = ltrim(t3_3.c, 'A'::text))
-                     ->  Hash Join
-                           Hash Cond: ((t1_3.b = t2_3.b) AND (t1_3.c = t2_3.c))
-                           ->  Seq Scan on pht1_p3 t1_3
-                           ->  Hash
-                                 ->  Seq Scan on pht2_p3 t2_3
-                     ->  Hash
-                           ->  Seq Scan on pht1_e_p3 t3_3
-(32 rows)
-
-SELECT avg(t1.a), avg(t2.b), avg(t3.a + t3.b), t1.c, t2.c, t3.c FROM pht1 t1, pht2 t2, pht1_e t3 WHERE t1.b = t2.b AND t1.c = t2.c AND ltrim(t3.c, 'A') = t1.c GROUP BY t1.c, t2.c, t3.c ORDER BY t1.c, t2.c, t3.c;
-         avg          |         avg          |         avg          |  c   |  c   |   c   
-----------------------+----------------------+----------------------+------+------+-------
-  24.0000000000000000 |  24.0000000000000000 |  48.0000000000000000 | 0000 | 0000 | A0000
-  75.0000000000000000 |  75.0000000000000000 | 148.0000000000000000 | 0001 | 0001 | A0001
- 123.0000000000000000 | 123.0000000000000000 | 248.0000000000000000 | 0002 | 0002 | A0002
- 174.0000000000000000 | 174.0000000000000000 | 348.0000000000000000 | 0003 | 0003 | A0003
- 225.0000000000000000 | 225.0000000000000000 | 448.0000000000000000 | 0004 | 0004 | A0004
- 273.0000000000000000 | 273.0000000000000000 | 548.0000000000000000 | 0005 | 0005 | A0005
-(6 rows)
-
--- test default partition behavior for range
-ALTER TABLE prt1 DETACH PARTITION prt1_p3;
-ALTER TABLE prt1 ATTACH PARTITION prt1_p3 DEFAULT;
-ANALYZE prt1;
-ALTER TABLE prt2 DETACH PARTITION prt2_p3;
-ALTER TABLE prt2 ATTACH PARTITION prt2_p3 DEFAULT;
-ANALYZE prt2;
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1 t1, prt2 t2 WHERE t1.a = t2.b AND t1.b = 0 ORDER BY t1.a, t2.b;
-                    QUERY PLAN                    
---------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Hash Join
-               Hash Cond: (t2_1.b = t1_1.a)
-               ->  Seq Scan on prt2_p1 t2_1
-               ->  Hash
-                     ->  Seq Scan on prt1_p1 t1_1
-                           Filter: (b = 0)
-         ->  Hash Join
-               Hash Cond: (t2_2.b = t1_2.a)
-               ->  Seq Scan on prt2_p2 t2_2
-               ->  Hash
-                     ->  Seq Scan on prt1_p2 t1_2
-                           Filter: (b = 0)
-         ->  Hash Join
-               Hash Cond: (t2_3.b = t1_3.a)
-               ->  Seq Scan on prt2_p3 t2_3
-               ->  Hash
-                     ->  Seq Scan on prt1_p3 t1_3
-                           Filter: (b = 0)
-(21 rows)
-
--- test default partition behavior for list
-ALTER TABLE plt1 DETACH PARTITION plt1_p3;
-ALTER TABLE plt1 ATTACH PARTITION plt1_p3 DEFAULT;
-ANALYZE plt1;
-ALTER TABLE plt2 DETACH PARTITION plt2_p3;
-ALTER TABLE plt2 ATTACH PARTITION plt2_p3 DEFAULT;
-ANALYZE plt2;
-EXPLAIN (COSTS OFF)
-SELECT avg(t1.a), avg(t2.b), t1.c, t2.c FROM plt1 t1 RIGHT JOIN plt2 t2 ON t1.c = t2.c WHERE t1.a % 25 = 0 GROUP BY t1.c, t2.c ORDER BY t1.c, t2.c;
-                       QUERY PLAN                       
---------------------------------------------------------
- Sort
-   Sort Key: t1.c
-   ->  HashAggregate
-         Group Key: t1.c
-         ->  Append
-               ->  Hash Join
-                     Hash Cond: (t2_1.c = t1_1.c)
-                     ->  Seq Scan on plt2_p1 t2_1
-                     ->  Hash
-                           ->  Seq Scan on plt1_p1 t1_1
-                                 Filter: ((a % 25) = 0)
-               ->  Hash Join
-                     Hash Cond: (t2_2.c = t1_2.c)
-                     ->  Seq Scan on plt2_p2 t2_2
-                     ->  Hash
-                           ->  Seq Scan on plt1_p2 t1_2
-                                 Filter: ((a % 25) = 0)
-               ->  Hash Join
-                     Hash Cond: (t2_3.c = t1_3.c)
-                     ->  Seq Scan on plt2_p3 t2_3
-                     ->  Hash
-                           ->  Seq Scan on plt1_p3 t1_3
-                                 Filter: ((a % 25) = 0)
-(23 rows)
-
---
--- multiple levels of partitioning
---
-CREATE TABLE prt1_l (a int, b int, c varchar) PARTITION BY RANGE(a);
-CREATE TABLE prt1_l_p1 PARTITION OF prt1_l FOR VALUES FROM (0) TO (250);
-CREATE TABLE prt1_l_p2 PARTITION OF prt1_l FOR VALUES FROM (250) TO (500) PARTITION BY LIST (c);
-CREATE TABLE prt1_l_p2_p1 PARTITION OF prt1_l_p2 FOR VALUES IN ('0000', '0001');
-CREATE TABLE prt1_l_p2_p2 PARTITION OF prt1_l_p2 FOR VALUES IN ('0002', '0003');
-CREATE TABLE prt1_l_p3 PARTITION OF prt1_l FOR VALUES FROM (500) TO (600) PARTITION BY RANGE (b);
-CREATE TABLE prt1_l_p3_p1 PARTITION OF prt1_l_p3 FOR VALUES FROM (0) TO (13);
-CREATE TABLE prt1_l_p3_p2 PARTITION OF prt1_l_p3 FOR VALUES FROM (13) TO (25);
-INSERT INTO prt1_l SELECT i, i % 25, to_char(i % 4, 'FM0000') FROM generate_series(0, 599, 2) i;
-ANALYZE prt1_l;
-CREATE TABLE prt2_l (a int, b int, c varchar) PARTITION BY RANGE(b);
-CREATE TABLE prt2_l_p1 PARTITION OF prt2_l FOR VALUES FROM (0) TO (250);
-CREATE TABLE prt2_l_p2 PARTITION OF prt2_l FOR VALUES FROM (250) TO (500) PARTITION BY LIST (c);
-CREATE TABLE prt2_l_p2_p1 PARTITION OF prt2_l_p2 FOR VALUES IN ('0000', '0001');
-CREATE TABLE prt2_l_p2_p2 PARTITION OF prt2_l_p2 FOR VALUES IN ('0002', '0003');
-CREATE TABLE prt2_l_p3 PARTITION OF prt2_l FOR VALUES FROM (500) TO (600) PARTITION BY RANGE (a);
-CREATE TABLE prt2_l_p3_p1 PARTITION OF prt2_l_p3 FOR VALUES FROM (0) TO (13);
-CREATE TABLE prt2_l_p3_p2 PARTITION OF prt2_l_p3 FOR VALUES FROM (13) TO (25);
-INSERT INTO prt2_l SELECT i % 25, i, to_char(i % 4, 'FM0000') FROM generate_series(0, 599, 3) i;
-ANALYZE prt2_l;
--- inner join, qual covering only top-level partitions
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1_l t1, prt2_l t2 WHERE t1.a = t2.b AND t1.b = 0 ORDER BY t1.a, t2.b;
-                         QUERY PLAN                          
--------------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Hash Join
-               Hash Cond: (t2_1.b = t1_1.a)
-               ->  Seq Scan on prt2_l_p1 t2_1
-               ->  Hash
-                     ->  Seq Scan on prt1_l_p1 t1_1
-                           Filter: (b = 0)
-         ->  Hash Join
-               Hash Cond: (t2_3.b = t1_3.a)
-               ->  Append
-                     ->  Seq Scan on prt2_l_p2_p1 t2_3
-                     ->  Seq Scan on prt2_l_p2_p2 t2_4
-               ->  Hash
-                     ->  Append
-                           ->  Seq Scan on prt1_l_p2_p1 t1_3
-                                 Filter: (b = 0)
-                           ->  Seq Scan on prt1_l_p2_p2 t1_4
-                                 Filter: (b = 0)
-         ->  Hash Join
-               Hash Cond: (t2_6.b = t1_5.a)
-               ->  Append
-                     ->  Seq Scan on prt2_l_p3_p1 t2_6
-                     ->  Seq Scan on prt2_l_p3_p2 t2_7
-               ->  Hash
-                     ->  Seq Scan on prt1_l_p3_p1 t1_5
-                           Filter: (b = 0)
-(28 rows)
-
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1_l t1, prt2_l t2 WHERE t1.a = t2.b AND t1.b = 0 ORDER BY t1.a, t2.b;
-  a  |  c   |  b  |  c   
------+------+-----+------
-   0 | 0000 |   0 | 0000
- 150 | 0002 | 150 | 0002
- 300 | 0000 | 300 | 0000
- 450 | 0002 | 450 | 0002
-(4 rows)
-
--- inner join with partially-redundant join clauses
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1_l t1, prt2_l t2 WHERE t1.a = t2.a AND t1.a = t2.b AND t1.c = t2.c ORDER BY t1.a, t2.b;
-                                     QUERY PLAN                                     
-------------------------------------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Hash Join
-               Hash Cond: ((t1_1.a = t2_1.a) AND ((t1_1.c)::text = (t2_1.c)::text))
-               ->  Seq Scan on prt1_l_p1 t1_1
-               ->  Hash
-                     ->  Seq Scan on prt2_l_p1 t2_1
-                           Filter: (a = b)
-         ->  Hash Join
-               Hash Cond: ((t1_2.a = t2_2.a) AND ((t1_2.c)::text = (t2_2.c)::text))
-               ->  Seq Scan on prt1_l_p2_p1 t1_2
-               ->  Hash
-                     ->  Seq Scan on prt2_l_p2_p1 t2_2
-                           Filter: (a = b)
-         ->  Hash Join
-               Hash Cond: ((t1_3.a = t2_3.a) AND ((t1_3.c)::text = (t2_3.c)::text))
-               ->  Seq Scan on prt1_l_p2_p2 t1_3
-               ->  Hash
-                     ->  Seq Scan on prt2_l_p2_p2 t2_3
-                           Filter: (a = b)
-         ->  Hash Join
-               Hash Cond: ((t1_5.a = t2_5.a) AND ((t1_5.c)::text = (t2_5.c)::text))
-               ->  Append
-                     ->  Seq Scan on prt1_l_p3_p1 t1_5
-                     ->  Seq Scan on prt1_l_p3_p2 t1_6
-               ->  Hash
-                     ->  Append
-                           ->  Seq Scan on prt2_l_p3_p1 t2_5
-                                 Filter: (a = b)
-                           ->  Seq Scan on prt2_l_p3_p2 t2_6
-                                 Filter: (a = b)
-(32 rows)
-
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1_l t1, prt2_l t2 WHERE t1.a = t2.a AND t1.a = t2.b AND t1.c = t2.c ORDER BY t1.a, t2.b;
- a  |  c   | b  |  c   
-----+------+----+------
-  0 | 0000 |  0 | 0000
-  6 | 0002 |  6 | 0002
- 12 | 0000 | 12 | 0000
- 18 | 0002 | 18 | 0002
- 24 | 0000 | 24 | 0000
-(5 rows)
-
--- left join
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1_l t1 LEFT JOIN prt2_l t2 ON t1.a = t2.b AND t1.c = t2.c WHERE t1.b = 0 ORDER BY t1.a, t2.b;
-                                     QUERY PLAN                                     
-------------------------------------------------------------------------------------
- Sort
-   Sort Key: t1.a, t2.b
-   ->  Append
-         ->  Hash Right Join
-               Hash Cond: ((t2_1.b = t1_1.a) AND ((t2_1.c)::text = (t1_1.c)::text))
-               ->  Seq Scan on prt2_l_p1 t2_1
-               ->  Hash
-                     ->  Seq Scan on prt1_l_p1 t1_1
-                           Filter: (b = 0)
-         ->  Hash Right Join
-               Hash Cond: ((t2_2.b = t1_2.a) AND ((t2_2.c)::text = (t1_2.c)::text))
-               ->  Seq Scan on prt2_l_p2_p1 t2_2
-               ->  Hash
-                     ->  Seq Scan on prt1_l_p2_p1 t1_2
-                           Filter: (b = 0)
-         ->  Hash Right Join
-               Hash Cond: ((t2_3.b = t1_3.a) AND ((t2_3.c)::text = (t1_3.c)::text))
-               ->  Seq Scan on prt2_l_p2_p2 t2_3
-               ->  Hash
-                     ->  Seq Scan on prt1_l_p2_p2 t1_3
-                           Filter: (b = 0)
-         ->  Hash Right Join
-               Hash Cond: ((t2_5.b = t1_4.a) AND ((t2_5.c)::text = (t1_4.c)::text))
-               ->  Append
-                     ->  Seq Scan on prt2_l_p3_p1 t2_5
-                     ->  Seq Scan on prt2_l_p3_p2 t2_6
-               ->  Hash
-                     ->  Seq Scan on prt1_l_p3_p1 t1_4
-                           Filter: (b = 0)
-(29 rows)
-
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1_l t1 LEFT JOIN prt2_l t2 ON t1.a = t2.b AND t1.c = t2.c WHERE t1.b = 0 ORDER BY t1.a, t2.b;
-  a  |  c   |  b  |  c   
------+------+-----+------
-   0 | 0000 |   0 | 0000
-  50 | 0002 |     | 
- 100 | 0000 |     | 
- 150 | 0002 | 150 | 0002
- 200 | 0000 |     | 
- 250 | 0002 |     | 
- 300 | 0000 | 300 | 0000
- 350 | 0002 |     | 
- 400 | 0000 |     | 
- 450 | 0002 | 450 | 0002
- 500 | 0000 |     | 
- 550 | 0002 |     | 
-(12 rows)
-
--- right join
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1_l t1 RIGHT JOIN prt2_l t2 ON t1.a = t2.b AND t1.c = t2.c WHERE t2.a = 0 ORDER BY t1.a, t2.b;
-                                     QUERY PLAN                                     
-------------------------------------------------------------------------------------
- Sort
-   Sort Key: t1.a, t2.b
-   ->  Append
-         ->  Hash Right Join
-               Hash Cond: ((t1_1.a = t2_1.b) AND ((t1_1.c)::text = (t2_1.c)::text))
-               ->  Seq Scan on prt1_l_p1 t1_1
-               ->  Hash
-                     ->  Seq Scan on prt2_l_p1 t2_1
-                           Filter: (a = 0)
-         ->  Hash Right Join
-               Hash Cond: ((t1_2.a = t2_2.b) AND ((t1_2.c)::text = (t2_2.c)::text))
-               ->  Seq Scan on prt1_l_p2_p1 t1_2
-               ->  Hash
-                     ->  Seq Scan on prt2_l_p2_p1 t2_2
-                           Filter: (a = 0)
-         ->  Hash Right Join
-               Hash Cond: ((t1_3.a = t2_3.b) AND ((t1_3.c)::text = (t2_3.c)::text))
-               ->  Seq Scan on prt1_l_p2_p2 t1_3
-               ->  Hash
-                     ->  Seq Scan on prt2_l_p2_p2 t2_3
-                           Filter: (a = 0)
-         ->  Hash Right Join
-               Hash Cond: ((t1_5.a = t2_4.b) AND ((t1_5.c)::text = (t2_4.c)::text))
-               ->  Append
-                     ->  Seq Scan on prt1_l_p3_p1 t1_5
-                     ->  Seq Scan on prt1_l_p3_p2 t1_6
-               ->  Hash
-                     ->  Seq Scan on prt2_l_p3_p1 t2_4
-                           Filter: (a = 0)
-(29 rows)
-
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1_l t1 RIGHT JOIN prt2_l t2 ON t1.a = t2.b AND t1.c = t2.c WHERE t2.a = 0 ORDER BY t1.a, t2.b;
-  a  |  c   |  b  |  c   
------+------+-----+------
-   0 | 0000 |   0 | 0000
- 150 | 0002 | 150 | 0002
- 300 | 0000 | 300 | 0000
- 450 | 0002 | 450 | 0002
-     |      |  75 | 0003
-     |      | 225 | 0001
-     |      | 375 | 0003
-     |      | 525 | 0001
-(8 rows)
-
--- full join
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM (SELECT * FROM prt1_l WHERE prt1_l.b = 0) t1 FULL JOIN (SELECT * FROM prt2_l WHERE prt2_l.a = 0) t2 ON (t1.a = t2.b AND t1.c = t2.c) ORDER BY t1.a, t2.b;
-                                             QUERY PLAN                                             
-----------------------------------------------------------------------------------------------------
- Sort
-   Sort Key: prt1_l.a, prt2_l.b
-   ->  Append
-         ->  Hash Full Join
-               Hash Cond: ((prt1_l_1.a = prt2_l_1.b) AND ((prt1_l_1.c)::text = (prt2_l_1.c)::text))
-               ->  Seq Scan on prt1_l_p1 prt1_l_1
-                     Filter: (b = 0)
-               ->  Hash
-                     ->  Seq Scan on prt2_l_p1 prt2_l_1
-                           Filter: (a = 0)
-         ->  Hash Full Join
-               Hash Cond: ((prt1_l_2.a = prt2_l_2.b) AND ((prt1_l_2.c)::text = (prt2_l_2.c)::text))
-               ->  Seq Scan on prt1_l_p2_p1 prt1_l_2
-                     Filter: (b = 0)
-               ->  Hash
-                     ->  Seq Scan on prt2_l_p2_p1 prt2_l_2
-                           Filter: (a = 0)
-         ->  Hash Full Join
-               Hash Cond: ((prt1_l_3.a = prt2_l_3.b) AND ((prt1_l_3.c)::text = (prt2_l_3.c)::text))
-               ->  Seq Scan on prt1_l_p2_p2 prt1_l_3
-                     Filter: (b = 0)
-               ->  Hash
-                     ->  Seq Scan on prt2_l_p2_p2 prt2_l_3
-                           Filter: (a = 0)
-         ->  Hash Full Join
-               Hash Cond: ((prt1_l_4.a = prt2_l_4.b) AND ((prt1_l_4.c)::text = (prt2_l_4.c)::text))
-               ->  Seq Scan on prt1_l_p3_p1 prt1_l_4
-                     Filter: (b = 0)
-               ->  Hash
-                     ->  Seq Scan on prt2_l_p3_p1 prt2_l_4
-                           Filter: (a = 0)
-(31 rows)
-
-SELECT t1.a, t1.c, t2.b, t2.c FROM (SELECT * FROM prt1_l WHERE prt1_l.b = 0) t1 FULL JOIN (SELECT * FROM prt2_l WHERE prt2_l.a = 0) t2 ON (t1.a = t2.b AND t1.c = t2.c) ORDER BY t1.a, t2.b;
-  a  |  c   |  b  |  c   
------+------+-----+------
-   0 | 0000 |   0 | 0000
-  50 | 0002 |     | 
- 100 | 0000 |     | 
- 150 | 0002 | 150 | 0002
- 200 | 0000 |     | 
- 250 | 0002 |     | 
- 300 | 0000 | 300 | 0000
- 350 | 0002 |     | 
- 400 | 0000 |     | 
- 450 | 0002 | 450 | 0002
- 500 | 0000 |     | 
- 550 | 0002 |     | 
-     |      |  75 | 0003
-     |      | 225 | 0001
-     |      | 375 | 0003
-     |      | 525 | 0001
-(16 rows)
-
--- lateral partitionwise join
-EXPLAIN (COSTS OFF)
-SELECT * FROM prt1_l t1 LEFT JOIN LATERAL
-			  (SELECT t2.a AS t2a, t2.c AS t2c, t2.b AS t2b, t3.b AS t3b, least(t1.a,t2.a,t3.b) FROM prt1_l t2 JOIN prt2_l t3 ON (t2.a = t3.b AND t2.c = t3.c)) ss
-			  ON t1.a = ss.t2a AND t1.c = ss.t2c WHERE t1.b = 0 ORDER BY t1.a;
-                                          QUERY PLAN                                           
------------------------------------------------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Nested Loop Left Join
-               ->  Seq Scan on prt1_l_p1 t1_1
-                     Filter: (b = 0)
-               ->  Hash Join
-                     Hash Cond: ((t3_1.b = t2_1.a) AND ((t3_1.c)::text = (t2_1.c)::text))
-                     ->  Seq Scan on prt2_l_p1 t3_1
-                     ->  Hash
-                           ->  Seq Scan on prt1_l_p1 t2_1
-                                 Filter: ((t1_1.a = a) AND ((t1_1.c)::text = (c)::text))
-         ->  Nested Loop Left Join
-               ->  Seq Scan on prt1_l_p2_p1 t1_2
-                     Filter: (b = 0)
-               ->  Hash Join
-                     Hash Cond: ((t3_2.b = t2_2.a) AND ((t3_2.c)::text = (t2_2.c)::text))
-                     ->  Seq Scan on prt2_l_p2_p1 t3_2
-                     ->  Hash
-                           ->  Seq Scan on prt1_l_p2_p1 t2_2
-                                 Filter: ((t1_2.a = a) AND ((t1_2.c)::text = (c)::text))
-         ->  Nested Loop Left Join
-               ->  Seq Scan on prt1_l_p2_p2 t1_3
-                     Filter: (b = 0)
-               ->  Hash Join
-                     Hash Cond: ((t3_3.b = t2_3.a) AND ((t3_3.c)::text = (t2_3.c)::text))
-                     ->  Seq Scan on prt2_l_p2_p2 t3_3
-                     ->  Hash
-                           ->  Seq Scan on prt1_l_p2_p2 t2_3
-                                 Filter: ((t1_3.a = a) AND ((t1_3.c)::text = (c)::text))
-         ->  Nested Loop Left Join
-               ->  Seq Scan on prt1_l_p3_p1 t1_4
-                     Filter: (b = 0)
-               ->  Hash Join
-                     Hash Cond: ((t3_5.b = t2_5.a) AND ((t3_5.c)::text = (t2_5.c)::text))
-                     ->  Append
-                           ->  Seq Scan on prt2_l_p3_p1 t3_5
-                           ->  Seq Scan on prt2_l_p3_p2 t3_6
-                     ->  Hash
-                           ->  Append
-                                 ->  Seq Scan on prt1_l_p3_p1 t2_5
-                                       Filter: ((t1_4.a = a) AND ((t1_4.c)::text = (c)::text))
-                                 ->  Seq Scan on prt1_l_p3_p2 t2_6
-                                       Filter: ((t1_4.a = a) AND ((t1_4.c)::text = (c)::text))
-(44 rows)
-
-SELECT * FROM prt1_l t1 LEFT JOIN LATERAL
-			  (SELECT t2.a AS t2a, t2.c AS t2c, t2.b AS t2b, t3.b AS t3b, least(t1.a,t2.a,t3.b) FROM prt1_l t2 JOIN prt2_l t3 ON (t2.a = t3.b AND t2.c = t3.c)) ss
-			  ON t1.a = ss.t2a AND t1.c = ss.t2c WHERE t1.b = 0 ORDER BY t1.a;
-  a  | b |  c   | t2a | t2c  | t2b | t3b | least 
------+---+------+-----+------+-----+-----+-------
-   0 | 0 | 0000 |   0 | 0000 |   0 |   0 |     0
-  50 | 0 | 0002 |     |      |     |     |      
- 100 | 0 | 0000 |     |      |     |     |      
- 150 | 0 | 0002 | 150 | 0002 |   0 | 150 |   150
- 200 | 0 | 0000 |     |      |     |     |      
- 250 | 0 | 0002 |     |      |     |     |      
- 300 | 0 | 0000 | 300 | 0000 |   0 | 300 |   300
- 350 | 0 | 0002 |     |      |     |     |      
- 400 | 0 | 0000 |     |      |     |     |      
- 450 | 0 | 0002 | 450 | 0002 |   0 | 450 |   450
- 500 | 0 | 0000 |     |      |     |     |      
- 550 | 0 | 0002 |     |      |     |     |      
-(12 rows)
-
--- partitionwise join with lateral reference in sample scan
-EXPLAIN (COSTS OFF)
-SELECT * FROM prt1_l t1 JOIN LATERAL
-			  (SELECT * FROM prt1_l t2 TABLESAMPLE SYSTEM (t1.a) REPEATABLE(t1.b)) s
-			  ON t1.a = s.a AND t1.b = s.b AND t1.c = s.c;
-                                       QUERY PLAN                                       
-----------------------------------------------------------------------------------------
- Append
-   ->  Nested Loop
-         ->  Seq Scan on prt1_l_p1 t1_1
-         ->  Sample Scan on prt1_l_p1 t2_1
-               Sampling: system (t1_1.a) REPEATABLE (t1_1.b)
-               Filter: ((t1_1.a = a) AND (t1_1.b = b) AND ((t1_1.c)::text = (c)::text))
-   ->  Nested Loop
-         ->  Seq Scan on prt1_l_p2_p1 t1_2
-         ->  Sample Scan on prt1_l_p2_p1 t2_2
-               Sampling: system (t1_2.a) REPEATABLE (t1_2.b)
-               Filter: ((t1_2.a = a) AND (t1_2.b = b) AND ((t1_2.c)::text = (c)::text))
-   ->  Nested Loop
-         ->  Seq Scan on prt1_l_p2_p2 t1_3
-         ->  Sample Scan on prt1_l_p2_p2 t2_3
-               Sampling: system (t1_3.a) REPEATABLE (t1_3.b)
-               Filter: ((t1_3.a = a) AND (t1_3.b = b) AND ((t1_3.c)::text = (c)::text))
-   ->  Nested Loop
-         ->  Seq Scan on prt1_l_p3_p1 t1_4
-         ->  Sample Scan on prt1_l_p3_p1 t2_4
-               Sampling: system (t1_4.a) REPEATABLE (t1_4.b)
-               Filter: ((t1_4.a = a) AND (t1_4.b = b) AND ((t1_4.c)::text = (c)::text))
-   ->  Nested Loop
-         ->  Seq Scan on prt1_l_p3_p2 t1_5
-         ->  Sample Scan on prt1_l_p3_p2 t2_5
-               Sampling: system (t1_5.a) REPEATABLE (t1_5.b)
-               Filter: ((t1_5.a = a) AND (t1_5.b = b) AND ((t1_5.c)::text = (c)::text))
-(26 rows)
-
--- partitionwise join with lateral reference in scan's restriction clauses
-EXPLAIN (COSTS OFF)
-SELECT COUNT(*) FROM prt1_l t1 LEFT JOIN LATERAL
-			  (SELECT t1.b AS t1b, t2.* FROM prt2_l t2) s
-			  ON t1.a = s.b AND t1.b = s.a AND t1.c = s.c
-			  WHERE s.t1b = s.a;
-                                                  QUERY PLAN                                                   
----------------------------------------------------------------------------------------------------------------
- Aggregate
-   ->  Append
-         ->  Nested Loop
-               ->  Seq Scan on prt1_l_p1 t1_1
-               ->  Seq Scan on prt2_l_p1 t2_1
-                     Filter: ((a = t1_1.b) AND (t1_1.a = b) AND (t1_1.b = a) AND ((t1_1.c)::text = (c)::text))
-         ->  Nested Loop
-               ->  Seq Scan on prt1_l_p2_p1 t1_2
-               ->  Seq Scan on prt2_l_p2_p1 t2_2
-                     Filter: ((a = t1_2.b) AND (t1_2.a = b) AND (t1_2.b = a) AND ((t1_2.c)::text = (c)::text))
-         ->  Nested Loop
-               ->  Seq Scan on prt1_l_p2_p2 t1_3
-               ->  Seq Scan on prt2_l_p2_p2 t2_3
-                     Filter: ((a = t1_3.b) AND (t1_3.a = b) AND (t1_3.b = a) AND ((t1_3.c)::text = (c)::text))
-         ->  Nested Loop
-               ->  Seq Scan on prt1_l_p3_p1 t1_4
-               ->  Seq Scan on prt2_l_p3_p1 t2_4
-                     Filter: ((a = t1_4.b) AND (t1_4.a = b) AND (t1_4.b = a) AND ((t1_4.c)::text = (c)::text))
-         ->  Nested Loop
-               ->  Seq Scan on prt1_l_p3_p2 t1_5
-               ->  Seq Scan on prt2_l_p3_p2 t2_5
-                     Filter: ((a = t1_5.b) AND (t1_5.a = b) AND (t1_5.b = a) AND ((t1_5.c)::text = (c)::text))
-(22 rows)
-
-SELECT COUNT(*) FROM prt1_l t1 LEFT JOIN LATERAL
-			  (SELECT t1.b AS t1b, t2.* FROM prt2_l t2) s
-			  ON t1.a = s.b AND t1.b = s.a AND t1.c = s.c
-			  WHERE s.t1b = s.a;
- count 
--------
-   100
-(1 row)
-
--- join with one side empty
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM (SELECT * FROM prt1_l WHERE a = 1 AND a = 2) t1 RIGHT JOIN prt2_l t2 ON t1.a = t2.b AND t1.b = t2.a AND t1.c = t2.c;
-                               QUERY PLAN                                
--------------------------------------------------------------------------
- Hash Left Join
-   Hash Cond: ((t2.b = a) AND (t2.a = b) AND ((t2.c)::text = (c)::text))
-   ->  Append
-         ->  Seq Scan on prt2_l_p1 t2_1
-         ->  Seq Scan on prt2_l_p2_p1 t2_2
-         ->  Seq Scan on prt2_l_p2_p2 t2_3
-         ->  Seq Scan on prt2_l_p3_p1 t2_4
-         ->  Seq Scan on prt2_l_p3_p2 t2_5
-   ->  Hash
-         ->  Result
-               One-Time Filter: false
-(11 rows)
-
--- Test case to verify proper handling of subqueries in a partitioned delete.
--- The weird-looking lateral join is just there to force creation of a
--- nestloop parameter within the subquery, which exposes the problem if the
--- planner fails to make multiple copies of the subquery as appropriate.
-EXPLAIN (COSTS OFF)
-DELETE FROM prt1_l
-WHERE EXISTS (
-  SELECT 1
-    FROM int4_tbl,
-         LATERAL (SELECT int4_tbl.f1 FROM int8_tbl LIMIT 2) ss
-    WHERE prt1_l.c IS NULL);
-                        QUERY PLAN                        
-----------------------------------------------------------
- Delete on prt1_l
-   Delete on prt1_l_p1 prt1_l_1
-   Delete on prt1_l_p3_p1 prt1_l_2
-   Delete on prt1_l_p3_p2 prt1_l_3
-   ->  Nested Loop Semi Join
-         ->  Append
-               ->  Seq Scan on prt1_l_p1 prt1_l_1
-                     Filter: (c IS NULL)
-               ->  Seq Scan on prt1_l_p3_p1 prt1_l_2
-                     Filter: (c IS NULL)
-               ->  Seq Scan on prt1_l_p3_p2 prt1_l_3
-                     Filter: (c IS NULL)
-         ->  Materialize
-               ->  Nested Loop
-                     ->  Seq Scan on int4_tbl
-                     ->  Subquery Scan on ss
-                           ->  Limit
-                                 ->  Seq Scan on int8_tbl
-(18 rows)
-
---
--- negative testcases
---
-CREATE TABLE prt1_n (a int, b int, c varchar) PARTITION BY RANGE(c);
-CREATE TABLE prt1_n_p1 PARTITION OF prt1_n FOR VALUES FROM ('0000') TO ('0250');
-CREATE TABLE prt1_n_p2 PARTITION OF prt1_n FOR VALUES FROM ('0250') TO ('0500');
-INSERT INTO prt1_n SELECT i, i, to_char(i, 'FM0000') FROM generate_series(0, 499, 2) i;
-ANALYZE prt1_n;
-CREATE TABLE prt2_n (a int, b int, c text) PARTITION BY LIST(c);
-CREATE TABLE prt2_n_p1 PARTITION OF prt2_n FOR VALUES IN ('0000', '0003', '0004', '0010', '0006', '0007');
-CREATE TABLE prt2_n_p2 PARTITION OF prt2_n FOR VALUES IN ('0001', '0005', '0002', '0009', '0008', '0011');
-INSERT INTO prt2_n SELECT i, i, to_char(i/50, 'FM0000') FROM generate_series(0, 599, 2) i;
-ANALYZE prt2_n;
-CREATE TABLE prt3_n (a int, b int, c text) PARTITION BY LIST(c);
-CREATE TABLE prt3_n_p1 PARTITION OF prt3_n FOR VALUES IN ('0000', '0004', '0006', '0007');
-CREATE TABLE prt3_n_p2 PARTITION OF prt3_n FOR VALUES IN ('0001', '0002', '0008', '0010');
-CREATE TABLE prt3_n_p3 PARTITION OF prt3_n FOR VALUES IN ('0003', '0005', '0009', '0011');
-INSERT INTO prt2_n SELECT i, i, to_char(i/50, 'FM0000') FROM generate_series(0, 599, 2) i;
-ANALYZE prt3_n;
-CREATE TABLE prt4_n (a int, b int, c text) PARTITION BY RANGE(a);
-CREATE TABLE prt4_n_p1 PARTITION OF prt4_n FOR VALUES FROM (0) TO (300);
-CREATE TABLE prt4_n_p2 PARTITION OF prt4_n FOR VALUES FROM (300) TO (500);
-CREATE TABLE prt4_n_p3 PARTITION OF prt4_n FOR VALUES FROM (500) TO (600);
-INSERT INTO prt4_n SELECT i, i, to_char(i, 'FM0000') FROM generate_series(0, 599, 2) i;
-ANALYZE prt4_n;
--- partitionwise join can not be applied if the partition ranges differ
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1 t1, prt4_n t2 WHERE t1.a = t2.a;
-                  QUERY PLAN                  
-----------------------------------------------
- Hash Join
-   Hash Cond: (t1.a = t2.a)
-   ->  Append
-         ->  Seq Scan on prt1_p1 t1_1
-         ->  Seq Scan on prt1_p2 t1_2
-         ->  Seq Scan on prt1_p3 t1_3
-   ->  Hash
-         ->  Append
-               ->  Seq Scan on prt4_n_p1 t2_1
-               ->  Seq Scan on prt4_n_p2 t2_2
-               ->  Seq Scan on prt4_n_p3 t2_3
-(11 rows)
-
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1 t1, prt4_n t2, prt2 t3 WHERE t1.a = t2.a and t1.a = t3.b;
-                       QUERY PLAN                       
---------------------------------------------------------
- Hash Join
-   Hash Cond: (t2.a = t1.a)
-   ->  Append
-         ->  Seq Scan on prt4_n_p1 t2_1
-         ->  Seq Scan on prt4_n_p2 t2_2
-         ->  Seq Scan on prt4_n_p3 t2_3
-   ->  Hash
-         ->  Append
-               ->  Hash Join
-                     Hash Cond: (t1_1.a = t3_1.b)
-                     ->  Seq Scan on prt1_p1 t1_1
-                     ->  Hash
-                           ->  Seq Scan on prt2_p1 t3_1
-               ->  Hash Join
-                     Hash Cond: (t1_2.a = t3_2.b)
-                     ->  Seq Scan on prt1_p2 t1_2
-                     ->  Hash
-                           ->  Seq Scan on prt2_p2 t3_2
-               ->  Hash Join
-                     Hash Cond: (t1_3.a = t3_3.b)
-                     ->  Seq Scan on prt1_p3 t1_3
-                     ->  Hash
-                           ->  Seq Scan on prt2_p3 t3_3
-(23 rows)
-
--- partitionwise join can not be applied if there are no equi-join conditions
--- between partition keys
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1 t1 LEFT JOIN prt2 t2 ON (t1.a < t2.b);
-                       QUERY PLAN                        
----------------------------------------------------------
- Nested Loop Left Join
-   ->  Append
-         ->  Seq Scan on prt1_p1 t1_1
-         ->  Seq Scan on prt1_p2 t1_2
-         ->  Seq Scan on prt1_p3 t1_3
-   ->  Append
-         ->  Index Scan using iprt2_p1_b on prt2_p1 t2_1
-               Index Cond: (b > t1.a)
-         ->  Index Scan using iprt2_p2_b on prt2_p2 t2_2
-               Index Cond: (b > t1.a)
-         ->  Index Scan using iprt2_p3_b on prt2_p3 t2_3
-               Index Cond: (b > t1.a)
-(12 rows)
-
--- equi-join with join condition on partial keys does not qualify for
--- partitionwise join
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1_m t1, prt2_m t2 WHERE t1.a = (t2.b + t2.a)/2;
-                  QUERY PLAN                  
-----------------------------------------------
- Hash Join
-   Hash Cond: (((t2.b + t2.a) / 2) = t1.a)
-   ->  Append
-         ->  Seq Scan on prt2_m_p1 t2_1
-         ->  Seq Scan on prt2_m_p2 t2_2
-         ->  Seq Scan on prt2_m_p3 t2_3
-   ->  Hash
-         ->  Append
-               ->  Seq Scan on prt1_m_p1 t1_1
-               ->  Seq Scan on prt1_m_p2 t1_2
-               ->  Seq Scan on prt1_m_p3 t1_3
-(11 rows)
-
--- equi-join between out-of-order partition key columns does not qualify for
--- partitionwise join
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1_m t1 LEFT JOIN prt2_m t2 ON t1.a = t2.b;
-                  QUERY PLAN                  
-----------------------------------------------
- Hash Left Join
-   Hash Cond: (t1.a = t2.b)
-   ->  Append
-         ->  Seq Scan on prt1_m_p1 t1_1
-         ->  Seq Scan on prt1_m_p2 t1_2
-         ->  Seq Scan on prt1_m_p3 t1_3
-   ->  Hash
-         ->  Append
-               ->  Seq Scan on prt2_m_p1 t2_1
-               ->  Seq Scan on prt2_m_p2 t2_2
-               ->  Seq Scan on prt2_m_p3 t2_3
-(11 rows)
-
--- equi-join between non-key columns does not qualify for partitionwise join
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1_m t1 LEFT JOIN prt2_m t2 ON t1.c = t2.c;
-                  QUERY PLAN                  
-----------------------------------------------
- Hash Left Join
-   Hash Cond: (t1.c = t2.c)
-   ->  Append
-         ->  Seq Scan on prt1_m_p1 t1_1
-         ->  Seq Scan on prt1_m_p2 t1_2
-         ->  Seq Scan on prt1_m_p3 t1_3
-   ->  Hash
-         ->  Append
-               ->  Seq Scan on prt2_m_p1 t2_1
-               ->  Seq Scan on prt2_m_p2 t2_2
-               ->  Seq Scan on prt2_m_p3 t2_3
-(11 rows)
-
--- partitionwise join can not be applied for a join between list and range
--- partitioned tables
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1_n t1 LEFT JOIN prt2_n t2 ON (t1.c = t2.c);
-                  QUERY PLAN                  
-----------------------------------------------
- Hash Right Join
-   Hash Cond: (t2.c = (t1.c)::text)
-   ->  Append
-         ->  Seq Scan on prt2_n_p1 t2_1
-         ->  Seq Scan on prt2_n_p2 t2_2
-   ->  Hash
-         ->  Append
-               ->  Seq Scan on prt1_n_p1 t1_1
-               ->  Seq Scan on prt1_n_p2 t1_2
-(9 rows)
-
--- partitionwise join can not be applied between tables with different
--- partition lists
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1_n t1 JOIN prt2_n t2 ON (t1.c = t2.c) JOIN plt1 t3 ON (t1.c = t3.c);
-                        QUERY PLAN                        
-----------------------------------------------------------
- Hash Join
-   Hash Cond: (t2.c = (t1.c)::text)
-   ->  Append
-         ->  Seq Scan on prt2_n_p1 t2_1
-         ->  Seq Scan on prt2_n_p2 t2_2
-   ->  Hash
-         ->  Hash Join
-               Hash Cond: (t3.c = (t1.c)::text)
-               ->  Append
-                     ->  Seq Scan on plt1_p1 t3_1
-                     ->  Seq Scan on plt1_p2 t3_2
-                     ->  Seq Scan on plt1_p3 t3_3
-               ->  Hash
-                     ->  Append
-                           ->  Seq Scan on prt1_n_p1 t1_1
-                           ->  Seq Scan on prt1_n_p2 t1_2
-(16 rows)
-
--- partitionwise join can not be applied for a join between key column and
--- non-key column
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1_n t1 FULL JOIN prt1 t2 ON (t1.c = t2.c);
-                  QUERY PLAN                  
-----------------------------------------------
- Hash Full Join
-   Hash Cond: ((t2.c)::text = (t1.c)::text)
-   ->  Append
-         ->  Seq Scan on prt1_p1 t2_1
-         ->  Seq Scan on prt1_p2 t2_2
-         ->  Seq Scan on prt1_p3 t2_3
-   ->  Hash
-         ->  Append
-               ->  Seq Scan on prt1_n_p1 t1_1
-               ->  Seq Scan on prt1_n_p2 t1_2
-(10 rows)
-
---
--- Test some other plan types in a partitionwise join (unfortunately,
--- we need larger tables to get the planner to choose these plan types)
---
-create temp table prtx1 (a integer, b integer, c integer)
-  partition by range (a);
-create temp table prtx1_1 partition of prtx1 for values from (1) to (11);
-create temp table prtx1_2 partition of prtx1 for values from (11) to (21);
-create temp table prtx1_3 partition of prtx1 for values from (21) to (31);
-create temp table prtx2 (a integer, b integer, c integer)
-  partition by range (a);
-create temp table prtx2_1 partition of prtx2 for values from (1) to (11);
-create temp table prtx2_2 partition of prtx2 for values from (11) to (21);
-create temp table prtx2_3 partition of prtx2 for values from (21) to (31);
-insert into prtx1 select 1 + i%30, i, i
-  from generate_series(1,1000) i;
-insert into prtx2 select 1 + i%30, i, i
-  from generate_series(1,500) i, generate_series(1,10) j;
-create index on prtx2 (b);
-create index on prtx2 (c);
-analyze prtx1;
-analyze prtx2;
-explain (costs off)
-select * from prtx1
-where not exists (select 1 from prtx2
-                  where prtx2.a=prtx1.a and prtx2.b=prtx1.b and prtx2.c=123)
-  and a<20 and c=120;
-                         QUERY PLAN                          
--------------------------------------------------------------
- Append
-   ->  Nested Loop Anti Join
-         ->  Seq Scan on prtx1_1
-               Filter: ((a < 20) AND (c = 120))
-         ->  Bitmap Heap Scan on prtx2_1
-               Recheck Cond: ((b = prtx1_1.b) AND (c = 123))
-               Filter: (a = prtx1_1.a)
-               ->  BitmapAnd
-                     ->  Bitmap Index Scan on prtx2_1_b_idx
-                           Index Cond: (b = prtx1_1.b)
-                     ->  Bitmap Index Scan on prtx2_1_c_idx
-                           Index Cond: (c = 123)
-   ->  Nested Loop Anti Join
-         ->  Seq Scan on prtx1_2
-               Filter: ((a < 20) AND (c = 120))
-         ->  Bitmap Heap Scan on prtx2_2
-               Recheck Cond: ((b = prtx1_2.b) AND (c = 123))
-               Filter: (a = prtx1_2.a)
-               ->  BitmapAnd
-                     ->  Bitmap Index Scan on prtx2_2_b_idx
-                           Index Cond: (b = prtx1_2.b)
-                     ->  Bitmap Index Scan on prtx2_2_c_idx
-                           Index Cond: (c = 123)
-(23 rows)
-
-select * from prtx1
-where not exists (select 1 from prtx2
-                  where prtx2.a=prtx1.a and prtx2.b=prtx1.b and prtx2.c=123)
-  and a<20 and c=120;
- a |  b  |  c  
----+-----+-----
- 1 | 120 | 120
-(1 row)
-
-explain (costs off)
-select * from prtx1
-where not exists (select 1 from prtx2
-                  where prtx2.a=prtx1.a and (prtx2.b=prtx1.b+1 or prtx2.c=99))
-  and a<20 and c=91;
-                           QUERY PLAN                            
------------------------------------------------------------------
- Append
-   ->  Nested Loop Anti Join
-         ->  Seq Scan on prtx1_1
-               Filter: ((a < 20) AND (c = 91))
-         ->  Bitmap Heap Scan on prtx2_1
-               Recheck Cond: ((b = (prtx1_1.b + 1)) OR (c = 99))
-               Filter: (a = prtx1_1.a)
-               ->  BitmapOr
-                     ->  Bitmap Index Scan on prtx2_1_b_idx
-                           Index Cond: (b = (prtx1_1.b + 1))
-                     ->  Bitmap Index Scan on prtx2_1_c_idx
-                           Index Cond: (c = 99)
-   ->  Nested Loop Anti Join
-         ->  Seq Scan on prtx1_2
-               Filter: ((a < 20) AND (c = 91))
-         ->  Bitmap Heap Scan on prtx2_2
-               Recheck Cond: ((b = (prtx1_2.b + 1)) OR (c = 99))
-               Filter: (a = prtx1_2.a)
-               ->  BitmapOr
-                     ->  Bitmap Index Scan on prtx2_2_b_idx
-                           Index Cond: (b = (prtx1_2.b + 1))
-                     ->  Bitmap Index Scan on prtx2_2_c_idx
-                           Index Cond: (c = 99)
-(23 rows)
-
-select * from prtx1
-where not exists (select 1 from prtx2
-                  where prtx2.a=prtx1.a and (prtx2.b=prtx1.b+1 or prtx2.c=99))
-  and a<20 and c=91;
- a | b  | c  
----+----+----
- 2 | 91 | 91
-(1 row)
-
---
--- Test advanced partition-matching algorithm for partitioned join
---
--- Tests for range-partitioned tables
-CREATE TABLE prt1_adv (a int, b int, c varchar) PARTITION BY RANGE (a);
-CREATE TABLE prt1_adv_p1 PARTITION OF prt1_adv FOR VALUES FROM (100) TO (200);
-CREATE TABLE prt1_adv_p2 PARTITION OF prt1_adv FOR VALUES FROM (200) TO (300);
-CREATE TABLE prt1_adv_p3 PARTITION OF prt1_adv FOR VALUES FROM (300) TO (400);
-CREATE INDEX prt1_adv_a_idx ON prt1_adv (a);
-INSERT INTO prt1_adv SELECT i, i % 25, to_char(i, 'FM0000') FROM generate_series(100, 399) i;
-ANALYZE prt1_adv;
-CREATE TABLE prt2_adv (a int, b int, c varchar) PARTITION BY RANGE (b);
-CREATE TABLE prt2_adv_p1 PARTITION OF prt2_adv FOR VALUES FROM (100) TO (150);
-CREATE TABLE prt2_adv_p2 PARTITION OF prt2_adv FOR VALUES FROM (200) TO (300);
-CREATE TABLE prt2_adv_p3 PARTITION OF prt2_adv FOR VALUES FROM (350) TO (500);
-CREATE INDEX prt2_adv_b_idx ON prt2_adv (b);
-INSERT INTO prt2_adv_p1 SELECT i % 25, i, to_char(i, 'FM0000') FROM generate_series(100, 149) i;
-INSERT INTO prt2_adv_p2 SELECT i % 25, i, to_char(i, 'FM0000') FROM generate_series(200, 299) i;
-INSERT INTO prt2_adv_p3 SELECT i % 25, i, to_char(i, 'FM0000') FROM generate_series(350, 499) i;
-ANALYZE prt2_adv;
--- inner join
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1_adv t1 INNER JOIN prt2_adv t2 ON (t1.a = t2.b) WHERE t1.b = 0 ORDER BY t1.a, t2.b;
-                      QUERY PLAN                      
-------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Hash Join
-               Hash Cond: (t2_1.b = t1_1.a)
-               ->  Seq Scan on prt2_adv_p1 t2_1
-               ->  Hash
-                     ->  Seq Scan on prt1_adv_p1 t1_1
-                           Filter: (b = 0)
-         ->  Hash Join
-               Hash Cond: (t2_2.b = t1_2.a)
-               ->  Seq Scan on prt2_adv_p2 t2_2
-               ->  Hash
-                     ->  Seq Scan on prt1_adv_p2 t1_2
-                           Filter: (b = 0)
-         ->  Hash Join
-               Hash Cond: (t2_3.b = t1_3.a)
-               ->  Seq Scan on prt2_adv_p3 t2_3
-               ->  Hash
-                     ->  Seq Scan on prt1_adv_p3 t1_3
-                           Filter: (b = 0)
-(21 rows)
-
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1_adv t1 INNER JOIN prt2_adv t2 ON (t1.a = t2.b) WHERE t1.b = 0 ORDER BY t1.a, t2.b;
-  a  |  c   |  b  |  c   
------+------+-----+------
- 100 | 0100 | 100 | 0100
- 125 | 0125 | 125 | 0125
- 200 | 0200 | 200 | 0200
- 225 | 0225 | 225 | 0225
- 250 | 0250 | 250 | 0250
- 275 | 0275 | 275 | 0275
- 350 | 0350 | 350 | 0350
- 375 | 0375 | 375 | 0375
-(8 rows)
-
--- semi join
-EXPLAIN (COSTS OFF)
-SELECT t1.* FROM prt1_adv t1 WHERE EXISTS (SELECT 1 FROM prt2_adv t2 WHERE t1.a = t2.b) AND t1.b = 0 ORDER BY t1.a;
-                      QUERY PLAN                      
-------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Hash Right Semi Join
-               Hash Cond: (t2_1.b = t1_1.a)
-               ->  Seq Scan on prt2_adv_p1 t2_1
-               ->  Hash
-                     ->  Seq Scan on prt1_adv_p1 t1_1
-                           Filter: (b = 0)
-         ->  Hash Right Semi Join
-               Hash Cond: (t2_2.b = t1_2.a)
-               ->  Seq Scan on prt2_adv_p2 t2_2
-               ->  Hash
-                     ->  Seq Scan on prt1_adv_p2 t1_2
-                           Filter: (b = 0)
-         ->  Hash Right Semi Join
-               Hash Cond: (t2_3.b = t1_3.a)
-               ->  Seq Scan on prt2_adv_p3 t2_3
-               ->  Hash
-                     ->  Seq Scan on prt1_adv_p3 t1_3
-                           Filter: (b = 0)
-(21 rows)
-
-SELECT t1.* FROM prt1_adv t1 WHERE EXISTS (SELECT 1 FROM prt2_adv t2 WHERE t1.a = t2.b) AND t1.b = 0 ORDER BY t1.a;
-  a  | b |  c   
------+---+------
- 100 | 0 | 0100
- 125 | 0 | 0125
- 200 | 0 | 0200
- 225 | 0 | 0225
- 250 | 0 | 0250
- 275 | 0 | 0275
- 350 | 0 | 0350
- 375 | 0 | 0375
-(8 rows)
-
--- left join
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1_adv t1 LEFT JOIN prt2_adv t2 ON (t1.a = t2.b) WHERE t1.b = 0 ORDER BY t1.a, t2.b;
-                      QUERY PLAN                      
-------------------------------------------------------
- Sort
-   Sort Key: t1.a, t2.b
-   ->  Append
-         ->  Hash Right Join
-               Hash Cond: (t2_1.b = t1_1.a)
-               ->  Seq Scan on prt2_adv_p1 t2_1
-               ->  Hash
-                     ->  Seq Scan on prt1_adv_p1 t1_1
-                           Filter: (b = 0)
-         ->  Hash Right Join
-               Hash Cond: (t2_2.b = t1_2.a)
-               ->  Seq Scan on prt2_adv_p2 t2_2
-               ->  Hash
-                     ->  Seq Scan on prt1_adv_p2 t1_2
-                           Filter: (b = 0)
-         ->  Hash Right Join
-               Hash Cond: (t2_3.b = t1_3.a)
-               ->  Seq Scan on prt2_adv_p3 t2_3
-               ->  Hash
-                     ->  Seq Scan on prt1_adv_p3 t1_3
-                           Filter: (b = 0)
-(21 rows)
-
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1_adv t1 LEFT JOIN prt2_adv t2 ON (t1.a = t2.b) WHERE t1.b = 0 ORDER BY t1.a, t2.b;
-  a  |  c   |  b  |  c   
------+------+-----+------
- 100 | 0100 | 100 | 0100
- 125 | 0125 | 125 | 0125
- 150 | 0150 |     | 
- 175 | 0175 |     | 
- 200 | 0200 | 200 | 0200
- 225 | 0225 | 225 | 0225
- 250 | 0250 | 250 | 0250
- 275 | 0275 | 275 | 0275
- 300 | 0300 |     | 
- 325 | 0325 |     | 
- 350 | 0350 | 350 | 0350
- 375 | 0375 | 375 | 0375
-(12 rows)
-
--- anti join
-EXPLAIN (COSTS OFF)
-SELECT t1.* FROM prt1_adv t1 WHERE NOT EXISTS (SELECT 1 FROM prt2_adv t2 WHERE t1.a = t2.b) AND t1.b = 0 ORDER BY t1.a;
-                      QUERY PLAN                      
-------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Hash Right Anti Join
-               Hash Cond: (t2_1.b = t1_1.a)
-               ->  Seq Scan on prt2_adv_p1 t2_1
-               ->  Hash
-                     ->  Seq Scan on prt1_adv_p1 t1_1
-                           Filter: (b = 0)
-         ->  Hash Right Anti Join
-               Hash Cond: (t2_2.b = t1_2.a)
-               ->  Seq Scan on prt2_adv_p2 t2_2
-               ->  Hash
-                     ->  Seq Scan on prt1_adv_p2 t1_2
-                           Filter: (b = 0)
-         ->  Hash Right Anti Join
-               Hash Cond: (t2_3.b = t1_3.a)
-               ->  Seq Scan on prt2_adv_p3 t2_3
-               ->  Hash
-                     ->  Seq Scan on prt1_adv_p3 t1_3
-                           Filter: (b = 0)
-(21 rows)
-
-SELECT t1.* FROM prt1_adv t1 WHERE NOT EXISTS (SELECT 1 FROM prt2_adv t2 WHERE t1.a = t2.b) AND t1.b = 0 ORDER BY t1.a;
-  a  | b |  c   
------+---+------
- 150 | 0 | 0150
- 175 | 0 | 0175
- 300 | 0 | 0300
- 325 | 0 | 0325
-(4 rows)
-
--- full join
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM (SELECT 175 phv, * FROM prt1_adv WHERE prt1_adv.b = 0) t1 FULL JOIN (SELECT 425 phv, * FROM prt2_adv WHERE prt2_adv.a = 0) t2 ON (t1.a = t2.b) WHERE t1.phv = t1.a OR t2.phv = t2.b ORDER BY t1.a, t2.b;
-                                QUERY PLAN                                
---------------------------------------------------------------------------
- Sort
-   Sort Key: prt1_adv.a, prt2_adv.b
-   ->  Append
-         ->  Hash Full Join
-               Hash Cond: (prt1_adv_1.a = prt2_adv_1.b)
-               Filter: (((175) = prt1_adv_1.a) OR ((425) = prt2_adv_1.b))
-               ->  Seq Scan on prt1_adv_p1 prt1_adv_1
-                     Filter: (b = 0)
-               ->  Hash
-                     ->  Seq Scan on prt2_adv_p1 prt2_adv_1
-                           Filter: (a = 0)
-         ->  Hash Full Join
-               Hash Cond: (prt1_adv_2.a = prt2_adv_2.b)
-               Filter: (((175) = prt1_adv_2.a) OR ((425) = prt2_adv_2.b))
-               ->  Seq Scan on prt1_adv_p2 prt1_adv_2
-                     Filter: (b = 0)
-               ->  Hash
-                     ->  Seq Scan on prt2_adv_p2 prt2_adv_2
-                           Filter: (a = 0)
-         ->  Hash Full Join
-               Hash Cond: (prt2_adv_3.b = prt1_adv_3.a)
-               Filter: (((175) = prt1_adv_3.a) OR ((425) = prt2_adv_3.b))
-               ->  Seq Scan on prt2_adv_p3 prt2_adv_3
-                     Filter: (a = 0)
-               ->  Hash
-                     ->  Seq Scan on prt1_adv_p3 prt1_adv_3
-                           Filter: (b = 0)
-(27 rows)
-
-SELECT t1.a, t1.c, t2.b, t2.c FROM (SELECT 175 phv, * FROM prt1_adv WHERE prt1_adv.b = 0) t1 FULL JOIN (SELECT 425 phv, * FROM prt2_adv WHERE prt2_adv.a = 0) t2 ON (t1.a = t2.b) WHERE t1.phv = t1.a OR t2.phv = t2.b ORDER BY t1.a, t2.b;
-  a  |  c   |  b  |  c   
------+------+-----+------
- 175 | 0175 |     | 
-     |      | 425 | 0425
-(2 rows)
-
--- Test cases where one side has an extra partition
-CREATE TABLE prt2_adv_extra PARTITION OF prt2_adv FOR VALUES FROM (500) TO (MAXVALUE);
-INSERT INTO prt2_adv SELECT i % 25, i, to_char(i, 'FM0000') FROM generate_series(500, 599) i;
-ANALYZE prt2_adv;
--- inner join
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1_adv t1 INNER JOIN prt2_adv t2 ON (t1.a = t2.b) WHERE t1.b = 0 ORDER BY t1.a, t2.b;
-                      QUERY PLAN                      
-------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Hash Join
-               Hash Cond: (t2_1.b = t1_1.a)
-               ->  Seq Scan on prt2_adv_p1 t2_1
-               ->  Hash
-                     ->  Seq Scan on prt1_adv_p1 t1_1
-                           Filter: (b = 0)
-         ->  Hash Join
-               Hash Cond: (t2_2.b = t1_2.a)
-               ->  Seq Scan on prt2_adv_p2 t2_2
-               ->  Hash
-                     ->  Seq Scan on prt1_adv_p2 t1_2
-                           Filter: (b = 0)
-         ->  Hash Join
-               Hash Cond: (t2_3.b = t1_3.a)
-               ->  Seq Scan on prt2_adv_p3 t2_3
-               ->  Hash
-                     ->  Seq Scan on prt1_adv_p3 t1_3
-                           Filter: (b = 0)
-(21 rows)
-
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1_adv t1 INNER JOIN prt2_adv t2 ON (t1.a = t2.b) WHERE t1.b = 0 ORDER BY t1.a, t2.b;
-  a  |  c   |  b  |  c   
------+------+-----+------
- 100 | 0100 | 100 | 0100
- 125 | 0125 | 125 | 0125
- 200 | 0200 | 200 | 0200
- 225 | 0225 | 225 | 0225
- 250 | 0250 | 250 | 0250
- 275 | 0275 | 275 | 0275
- 350 | 0350 | 350 | 0350
- 375 | 0375 | 375 | 0375
-(8 rows)
-
--- semi join
-EXPLAIN (COSTS OFF)
-SELECT t1.* FROM prt1_adv t1 WHERE EXISTS (SELECT 1 FROM prt2_adv t2 WHERE t1.a = t2.b) AND t1.b = 0 ORDER BY t1.a;
-                      QUERY PLAN                      
-------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Hash Right Semi Join
-               Hash Cond: (t2_1.b = t1_1.a)
-               ->  Seq Scan on prt2_adv_p1 t2_1
-               ->  Hash
-                     ->  Seq Scan on prt1_adv_p1 t1_1
-                           Filter: (b = 0)
-         ->  Hash Right Semi Join
-               Hash Cond: (t2_2.b = t1_2.a)
-               ->  Seq Scan on prt2_adv_p2 t2_2
-               ->  Hash
-                     ->  Seq Scan on prt1_adv_p2 t1_2
-                           Filter: (b = 0)
-         ->  Hash Right Semi Join
-               Hash Cond: (t2_3.b = t1_3.a)
-               ->  Seq Scan on prt2_adv_p3 t2_3
-               ->  Hash
-                     ->  Seq Scan on prt1_adv_p3 t1_3
-                           Filter: (b = 0)
-(21 rows)
-
-SELECT t1.* FROM prt1_adv t1 WHERE EXISTS (SELECT 1 FROM prt2_adv t2 WHERE t1.a = t2.b) AND t1.b = 0 ORDER BY t1.a;
-  a  | b |  c   
------+---+------
- 100 | 0 | 0100
- 125 | 0 | 0125
- 200 | 0 | 0200
- 225 | 0 | 0225
- 250 | 0 | 0250
- 275 | 0 | 0275
- 350 | 0 | 0350
- 375 | 0 | 0375
-(8 rows)
-
--- left join
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1_adv t1 LEFT JOIN prt2_adv t2 ON (t1.a = t2.b) WHERE t1.b = 0 ORDER BY t1.a, t2.b;
-                      QUERY PLAN                      
-------------------------------------------------------
- Sort
-   Sort Key: t1.a, t2.b
-   ->  Append
-         ->  Hash Right Join
-               Hash Cond: (t2_1.b = t1_1.a)
-               ->  Seq Scan on prt2_adv_p1 t2_1
-               ->  Hash
-                     ->  Seq Scan on prt1_adv_p1 t1_1
-                           Filter: (b = 0)
-         ->  Hash Right Join
-               Hash Cond: (t2_2.b = t1_2.a)
-               ->  Seq Scan on prt2_adv_p2 t2_2
-               ->  Hash
-                     ->  Seq Scan on prt1_adv_p2 t1_2
-                           Filter: (b = 0)
-         ->  Hash Right Join
-               Hash Cond: (t2_3.b = t1_3.a)
-               ->  Seq Scan on prt2_adv_p3 t2_3
-               ->  Hash
-                     ->  Seq Scan on prt1_adv_p3 t1_3
-                           Filter: (b = 0)
-(21 rows)
-
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1_adv t1 LEFT JOIN prt2_adv t2 ON (t1.a = t2.b) WHERE t1.b = 0 ORDER BY t1.a, t2.b;
-  a  |  c   |  b  |  c   
------+------+-----+------
- 100 | 0100 | 100 | 0100
- 125 | 0125 | 125 | 0125
- 150 | 0150 |     | 
- 175 | 0175 |     | 
- 200 | 0200 | 200 | 0200
- 225 | 0225 | 225 | 0225
- 250 | 0250 | 250 | 0250
- 275 | 0275 | 275 | 0275
- 300 | 0300 |     | 
- 325 | 0325 |     | 
- 350 | 0350 | 350 | 0350
- 375 | 0375 | 375 | 0375
-(12 rows)
-
--- left join; currently we can't do partitioned join if there are no matched
--- partitions on the nullable side
-EXPLAIN (COSTS OFF)
-SELECT t1.b, t1.c, t2.a, t2.c FROM prt2_adv t1 LEFT JOIN prt1_adv t2 ON (t1.b = t2.a) WHERE t1.a = 0 ORDER BY t1.b, t2.a;
-                       QUERY PLAN                        
----------------------------------------------------------
- Sort
-   Sort Key: t1.b, t2.a
-   ->  Hash Right Join
-         Hash Cond: (t2.a = t1.b)
-         ->  Append
-               ->  Seq Scan on prt1_adv_p1 t2_1
-               ->  Seq Scan on prt1_adv_p2 t2_2
-               ->  Seq Scan on prt1_adv_p3 t2_3
-         ->  Hash
-               ->  Append
-                     ->  Seq Scan on prt2_adv_p1 t1_1
-                           Filter: (a = 0)
-                     ->  Seq Scan on prt2_adv_p2 t1_2
-                           Filter: (a = 0)
-                     ->  Seq Scan on prt2_adv_p3 t1_3
-                           Filter: (a = 0)
-                     ->  Seq Scan on prt2_adv_extra t1_4
-                           Filter: (a = 0)
-(18 rows)
-
--- anti join
-EXPLAIN (COSTS OFF)
-SELECT t1.* FROM prt1_adv t1 WHERE NOT EXISTS (SELECT 1 FROM prt2_adv t2 WHERE t1.a = t2.b) AND t1.b = 0 ORDER BY t1.a;
-                      QUERY PLAN                      
-------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Hash Right Anti Join
-               Hash Cond: (t2_1.b = t1_1.a)
-               ->  Seq Scan on prt2_adv_p1 t2_1
-               ->  Hash
-                     ->  Seq Scan on prt1_adv_p1 t1_1
-                           Filter: (b = 0)
-         ->  Hash Right Anti Join
-               Hash Cond: (t2_2.b = t1_2.a)
-               ->  Seq Scan on prt2_adv_p2 t2_2
-               ->  Hash
-                     ->  Seq Scan on prt1_adv_p2 t1_2
-                           Filter: (b = 0)
-         ->  Hash Right Anti Join
-               Hash Cond: (t2_3.b = t1_3.a)
-               ->  Seq Scan on prt2_adv_p3 t2_3
-               ->  Hash
-                     ->  Seq Scan on prt1_adv_p3 t1_3
-                           Filter: (b = 0)
-(21 rows)
-
-SELECT t1.* FROM prt1_adv t1 WHERE NOT EXISTS (SELECT 1 FROM prt2_adv t2 WHERE t1.a = t2.b) AND t1.b = 0 ORDER BY t1.a;
-  a  | b |  c   
------+---+------
- 150 | 0 | 0150
- 175 | 0 | 0175
- 300 | 0 | 0300
- 325 | 0 | 0325
-(4 rows)
-
--- anti join; currently we can't do partitioned join if there are no matched
--- partitions on the nullable side
-EXPLAIN (COSTS OFF)
-SELECT t1.* FROM prt2_adv t1 WHERE NOT EXISTS (SELECT 1 FROM prt1_adv t2 WHERE t1.b = t2.a) AND t1.a = 0 ORDER BY t1.b;
-                       QUERY PLAN                        
----------------------------------------------------------
- Sort
-   Sort Key: t1.b
-   ->  Hash Right Anti Join
-         Hash Cond: (t2.a = t1.b)
-         ->  Append
-               ->  Seq Scan on prt1_adv_p1 t2_1
-               ->  Seq Scan on prt1_adv_p2 t2_2
-               ->  Seq Scan on prt1_adv_p3 t2_3
-         ->  Hash
-               ->  Append
-                     ->  Seq Scan on prt2_adv_p1 t1_1
-                           Filter: (a = 0)
-                     ->  Seq Scan on prt2_adv_p2 t1_2
-                           Filter: (a = 0)
-                     ->  Seq Scan on prt2_adv_p3 t1_3
-                           Filter: (a = 0)
-                     ->  Seq Scan on prt2_adv_extra t1_4
-                           Filter: (a = 0)
-(18 rows)
-
--- full join; currently we can't do partitioned join if there are no matched
--- partitions on the nullable side
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM (SELECT 175 phv, * FROM prt1_adv WHERE prt1_adv.b = 0) t1 FULL JOIN (SELECT 425 phv, * FROM prt2_adv WHERE prt2_adv.a = 0) t2 ON (t1.a = t2.b) WHERE t1.phv = t1.a OR t2.phv = t2.b ORDER BY t1.a, t2.b;
-                           QUERY PLAN                           
-----------------------------------------------------------------
- Sort
-   Sort Key: prt1_adv.a, prt2_adv.b
-   ->  Hash Full Join
-         Hash Cond: (prt2_adv.b = prt1_adv.a)
-         Filter: (((175) = prt1_adv.a) OR ((425) = prt2_adv.b))
-         ->  Append
-               ->  Seq Scan on prt2_adv_p1 prt2_adv_1
-                     Filter: (a = 0)
-               ->  Seq Scan on prt2_adv_p2 prt2_adv_2
-                     Filter: (a = 0)
-               ->  Seq Scan on prt2_adv_p3 prt2_adv_3
-                     Filter: (a = 0)
-               ->  Seq Scan on prt2_adv_extra prt2_adv_4
-                     Filter: (a = 0)
-         ->  Hash
-               ->  Append
-                     ->  Seq Scan on prt1_adv_p1 prt1_adv_1
-                           Filter: (b = 0)
-                     ->  Seq Scan on prt1_adv_p2 prt1_adv_2
-                           Filter: (b = 0)
-                     ->  Seq Scan on prt1_adv_p3 prt1_adv_3
-                           Filter: (b = 0)
-(22 rows)
-
--- 3-way join where not every pair of relations can do partitioned join
-EXPLAIN (COSTS OFF)
-SELECT t1.b, t1.c, t2.a, t2.c, t3.a, t3.c FROM prt2_adv t1 LEFT JOIN prt1_adv t2 ON (t1.b = t2.a) INNER JOIN prt1_adv t3 ON (t1.b = t3.a) WHERE t1.a = 0 ORDER BY t1.b, t2.a, t3.a;
-                                   QUERY PLAN                                   
---------------------------------------------------------------------------------
- Sort
-   Sort Key: t1.b, t2.a
-   ->  Append
-         ->  Nested Loop Left Join
-               ->  Nested Loop
-                     ->  Seq Scan on prt2_adv_p1 t1_1
-                           Filter: (a = 0)
-                     ->  Index Scan using prt1_adv_p1_a_idx on prt1_adv_p1 t3_1
-                           Index Cond: (a = t1_1.b)
-               ->  Index Scan using prt1_adv_p1_a_idx on prt1_adv_p1 t2_1
-                     Index Cond: (a = t1_1.b)
-         ->  Hash Right Join
-               Hash Cond: (t2_2.a = t1_2.b)
-               ->  Seq Scan on prt1_adv_p2 t2_2
-               ->  Hash
-                     ->  Hash Join
-                           Hash Cond: (t3_2.a = t1_2.b)
-                           ->  Seq Scan on prt1_adv_p2 t3_2
-                           ->  Hash
-                                 ->  Seq Scan on prt2_adv_p2 t1_2
-                                       Filter: (a = 0)
-         ->  Hash Right Join
-               Hash Cond: (t2_3.a = t1_3.b)
-               ->  Seq Scan on prt1_adv_p3 t2_3
-               ->  Hash
-                     ->  Hash Join
-                           Hash Cond: (t3_3.a = t1_3.b)
-                           ->  Seq Scan on prt1_adv_p3 t3_3
-                           ->  Hash
-                                 ->  Seq Scan on prt2_adv_p3 t1_3
-                                       Filter: (a = 0)
-(31 rows)
-
-SELECT t1.b, t1.c, t2.a, t2.c, t3.a, t3.c FROM prt2_adv t1 LEFT JOIN prt1_adv t2 ON (t1.b = t2.a) INNER JOIN prt1_adv t3 ON (t1.b = t3.a) WHERE t1.a = 0 ORDER BY t1.b, t2.a, t3.a;
-  b  |  c   |  a  |  c   |  a  |  c   
------+------+-----+------+-----+------
- 100 | 0100 | 100 | 0100 | 100 | 0100
- 125 | 0125 | 125 | 0125 | 125 | 0125
- 200 | 0200 | 200 | 0200 | 200 | 0200
- 225 | 0225 | 225 | 0225 | 225 | 0225
- 250 | 0250 | 250 | 0250 | 250 | 0250
- 275 | 0275 | 275 | 0275 | 275 | 0275
- 350 | 0350 | 350 | 0350 | 350 | 0350
- 375 | 0375 | 375 | 0375 | 375 | 0375
-(8 rows)
-
-DROP TABLE prt2_adv_extra;
--- Test cases where a partition on one side matches multiple partitions on
--- the other side; we currently can't do partitioned join in such cases
-ALTER TABLE prt2_adv DETACH PARTITION prt2_adv_p3;
--- Split prt2_adv_p3 into two partitions so that prt1_adv_p3 matches both
-CREATE TABLE prt2_adv_p3_1 PARTITION OF prt2_adv FOR VALUES FROM (350) TO (375);
-CREATE TABLE prt2_adv_p3_2 PARTITION OF prt2_adv FOR VALUES FROM (375) TO (500);
-INSERT INTO prt2_adv SELECT i % 25, i, to_char(i, 'FM0000') FROM generate_series(350, 499) i;
-ANALYZE prt2_adv;
--- inner join
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1_adv t1 INNER JOIN prt2_adv t2 ON (t1.a = t2.b) WHERE t1.b = 0 ORDER BY t1.a, t2.b;
-                      QUERY PLAN                      
-------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Hash Join
-         Hash Cond: (t2.b = t1.a)
-         ->  Append
-               ->  Seq Scan on prt2_adv_p1 t2_1
-               ->  Seq Scan on prt2_adv_p2 t2_2
-               ->  Seq Scan on prt2_adv_p3_1 t2_3
-               ->  Seq Scan on prt2_adv_p3_2 t2_4
-         ->  Hash
-               ->  Append
-                     ->  Seq Scan on prt1_adv_p1 t1_1
-                           Filter: (b = 0)
-                     ->  Seq Scan on prt1_adv_p2 t1_2
-                           Filter: (b = 0)
-                     ->  Seq Scan on prt1_adv_p3 t1_3
-                           Filter: (b = 0)
-(17 rows)
-
--- semi join
-EXPLAIN (COSTS OFF)
-SELECT t1.* FROM prt1_adv t1 WHERE EXISTS (SELECT 1 FROM prt2_adv t2 WHERE t1.a = t2.b) AND t1.b = 0 ORDER BY t1.a;
-                      QUERY PLAN                      
-------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Hash Right Semi Join
-         Hash Cond: (t2.b = t1.a)
-         ->  Append
-               ->  Seq Scan on prt2_adv_p1 t2_1
-               ->  Seq Scan on prt2_adv_p2 t2_2
-               ->  Seq Scan on prt2_adv_p3_1 t2_3
-               ->  Seq Scan on prt2_adv_p3_2 t2_4
-         ->  Hash
-               ->  Append
-                     ->  Seq Scan on prt1_adv_p1 t1_1
-                           Filter: (b = 0)
-                     ->  Seq Scan on prt1_adv_p2 t1_2
-                           Filter: (b = 0)
-                     ->  Seq Scan on prt1_adv_p3 t1_3
-                           Filter: (b = 0)
-(17 rows)
-
--- left join
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1_adv t1 LEFT JOIN prt2_adv t2 ON (t1.a = t2.b) WHERE t1.b = 0 ORDER BY t1.a, t2.b;
-                      QUERY PLAN                      
-------------------------------------------------------
- Sort
-   Sort Key: t1.a, t2.b
-   ->  Hash Right Join
-         Hash Cond: (t2.b = t1.a)
-         ->  Append
-               ->  Seq Scan on prt2_adv_p1 t2_1
-               ->  Seq Scan on prt2_adv_p2 t2_2
-               ->  Seq Scan on prt2_adv_p3_1 t2_3
-               ->  Seq Scan on prt2_adv_p3_2 t2_4
-         ->  Hash
-               ->  Append
-                     ->  Seq Scan on prt1_adv_p1 t1_1
-                           Filter: (b = 0)
-                     ->  Seq Scan on prt1_adv_p2 t1_2
-                           Filter: (b = 0)
-                     ->  Seq Scan on prt1_adv_p3 t1_3
-                           Filter: (b = 0)
-(17 rows)
-
--- anti join
-EXPLAIN (COSTS OFF)
-SELECT t1.* FROM prt1_adv t1 WHERE NOT EXISTS (SELECT 1 FROM prt2_adv t2 WHERE t1.a = t2.b) AND t1.b = 0 ORDER BY t1.a;
-                      QUERY PLAN                      
-------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Hash Right Anti Join
-         Hash Cond: (t2.b = t1.a)
-         ->  Append
-               ->  Seq Scan on prt2_adv_p1 t2_1
-               ->  Seq Scan on prt2_adv_p2 t2_2
-               ->  Seq Scan on prt2_adv_p3_1 t2_3
-               ->  Seq Scan on prt2_adv_p3_2 t2_4
-         ->  Hash
-               ->  Append
-                     ->  Seq Scan on prt1_adv_p1 t1_1
-                           Filter: (b = 0)
-                     ->  Seq Scan on prt1_adv_p2 t1_2
-                           Filter: (b = 0)
-                     ->  Seq Scan on prt1_adv_p3 t1_3
-                           Filter: (b = 0)
-(17 rows)
-
--- full join
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM (SELECT 175 phv, * FROM prt1_adv WHERE prt1_adv.b = 0) t1 FULL JOIN (SELECT 425 phv, * FROM prt2_adv WHERE prt2_adv.a = 0) t2 ON (t1.a = t2.b) WHERE t1.phv = t1.a OR t2.phv = t2.b ORDER BY t1.a, t2.b;
-                           QUERY PLAN                           
-----------------------------------------------------------------
- Sort
-   Sort Key: prt1_adv.a, prt2_adv.b
-   ->  Hash Full Join
-         Hash Cond: (prt2_adv.b = prt1_adv.a)
-         Filter: (((175) = prt1_adv.a) OR ((425) = prt2_adv.b))
-         ->  Append
-               ->  Seq Scan on prt2_adv_p1 prt2_adv_1
-                     Filter: (a = 0)
-               ->  Seq Scan on prt2_adv_p2 prt2_adv_2
-                     Filter: (a = 0)
-               ->  Seq Scan on prt2_adv_p3_1 prt2_adv_3
-                     Filter: (a = 0)
-               ->  Seq Scan on prt2_adv_p3_2 prt2_adv_4
-                     Filter: (a = 0)
-         ->  Hash
-               ->  Append
-                     ->  Seq Scan on prt1_adv_p1 prt1_adv_1
-                           Filter: (b = 0)
-                     ->  Seq Scan on prt1_adv_p2 prt1_adv_2
-                           Filter: (b = 0)
-                     ->  Seq Scan on prt1_adv_p3 prt1_adv_3
-                           Filter: (b = 0)
-(22 rows)
-
-DROP TABLE prt2_adv_p3_1;
-DROP TABLE prt2_adv_p3_2;
-ANALYZE prt2_adv;
--- Test default partitions
-ALTER TABLE prt1_adv DETACH PARTITION prt1_adv_p1;
--- Change prt1_adv_p1 to the default partition
-ALTER TABLE prt1_adv ATTACH PARTITION prt1_adv_p1 DEFAULT;
-ALTER TABLE prt1_adv DETACH PARTITION prt1_adv_p3;
-ANALYZE prt1_adv;
--- We can do partitioned join even if only one of relations has the default
--- partition
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1_adv t1 INNER JOIN prt2_adv t2 ON (t1.a = t2.b) WHERE t1.b = 0 ORDER BY t1.a, t2.b;
-                      QUERY PLAN                      
-------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Hash Join
-               Hash Cond: (t2_1.b = t1_2.a)
-               ->  Seq Scan on prt2_adv_p1 t2_1
-               ->  Hash
-                     ->  Seq Scan on prt1_adv_p1 t1_2
-                           Filter: (b = 0)
-         ->  Hash Join
-               Hash Cond: (t2_2.b = t1_1.a)
-               ->  Seq Scan on prt2_adv_p2 t2_2
-               ->  Hash
-                     ->  Seq Scan on prt1_adv_p2 t1_1
-                           Filter: (b = 0)
-(15 rows)
-
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1_adv t1 INNER JOIN prt2_adv t2 ON (t1.a = t2.b) WHERE t1.b = 0 ORDER BY t1.a, t2.b;
-  a  |  c   |  b  |  c   
------+------+-----+------
- 100 | 0100 | 100 | 0100
- 125 | 0125 | 125 | 0125
- 200 | 0200 | 200 | 0200
- 225 | 0225 | 225 | 0225
- 250 | 0250 | 250 | 0250
- 275 | 0275 | 275 | 0275
-(6 rows)
-
--- Restore prt1_adv_p3
-ALTER TABLE prt1_adv ATTACH PARTITION prt1_adv_p3 FOR VALUES FROM (300) TO (400);
-ANALYZE prt1_adv;
--- Restore prt2_adv_p3
-ALTER TABLE prt2_adv ATTACH PARTITION prt2_adv_p3 FOR VALUES FROM (350) TO (500);
-ANALYZE prt2_adv;
--- Partitioned join can't be applied because the default partition of prt1_adv
--- matches prt2_adv_p1 and prt2_adv_p3
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1_adv t1 INNER JOIN prt2_adv t2 ON (t1.a = t2.b) WHERE t1.b = 0 ORDER BY t1.a, t2.b;
-                      QUERY PLAN                      
-------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Hash Join
-         Hash Cond: (t2.b = t1.a)
-         ->  Append
-               ->  Seq Scan on prt2_adv_p1 t2_1
-               ->  Seq Scan on prt2_adv_p2 t2_2
-               ->  Seq Scan on prt2_adv_p3 t2_3
-         ->  Hash
-               ->  Append
-                     ->  Seq Scan on prt1_adv_p2 t1_1
-                           Filter: (b = 0)
-                     ->  Seq Scan on prt1_adv_p3 t1_2
-                           Filter: (b = 0)
-                     ->  Seq Scan on prt1_adv_p1 t1_3
-                           Filter: (b = 0)
-(16 rows)
-
-ALTER TABLE prt2_adv DETACH PARTITION prt2_adv_p3;
--- Change prt2_adv_p3 to the default partition
-ALTER TABLE prt2_adv ATTACH PARTITION prt2_adv_p3 DEFAULT;
-ANALYZE prt2_adv;
--- Partitioned join can't be applied because the default partition of prt1_adv
--- matches prt2_adv_p1 and prt2_adv_p3
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1_adv t1 INNER JOIN prt2_adv t2 ON (t1.a = t2.b) WHERE t1.b = 0 ORDER BY t1.a, t2.b;
-                      QUERY PLAN                      
-------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Hash Join
-         Hash Cond: (t2.b = t1.a)
-         ->  Append
-               ->  Seq Scan on prt2_adv_p1 t2_1
-               ->  Seq Scan on prt2_adv_p2 t2_2
-               ->  Seq Scan on prt2_adv_p3 t2_3
-         ->  Hash
-               ->  Append
-                     ->  Seq Scan on prt1_adv_p2 t1_1
-                           Filter: (b = 0)
-                     ->  Seq Scan on prt1_adv_p3 t1_2
-                           Filter: (b = 0)
-                     ->  Seq Scan on prt1_adv_p1 t1_3
-                           Filter: (b = 0)
-(16 rows)
-
-DROP TABLE prt1_adv_p3;
-ANALYZE prt1_adv;
-DROP TABLE prt2_adv_p3;
-ANALYZE prt2_adv;
-CREATE TABLE prt3_adv (a int, b int, c varchar) PARTITION BY RANGE (a);
-CREATE TABLE prt3_adv_p1 PARTITION OF prt3_adv FOR VALUES FROM (200) TO (300);
-CREATE TABLE prt3_adv_p2 PARTITION OF prt3_adv FOR VALUES FROM (300) TO (400);
-CREATE INDEX prt3_adv_a_idx ON prt3_adv (a);
-INSERT INTO prt3_adv SELECT i, i % 25, to_char(i, 'FM0000') FROM generate_series(200, 399) i;
-ANALYZE prt3_adv;
--- 3-way join to test the default partition of a join relation
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c, t3.a, t3.c FROM prt1_adv t1 LEFT JOIN prt2_adv t2 ON (t1.a = t2.b) LEFT JOIN prt3_adv t3 ON (t1.a = t3.a) WHERE t1.b = 0 ORDER BY t1.a, t2.b, t3.a;
-                            QUERY PLAN                            
-------------------------------------------------------------------
- Sort
-   Sort Key: t1.a, t2.b, t3.a
-   ->  Append
-         ->  Hash Right Join
-               Hash Cond: (t3_1.a = t1_1.a)
-               ->  Seq Scan on prt3_adv_p1 t3_1
-               ->  Hash
-                     ->  Hash Right Join
-                           Hash Cond: (t2_2.b = t1_1.a)
-                           ->  Seq Scan on prt2_adv_p2 t2_2
-                           ->  Hash
-                                 ->  Seq Scan on prt1_adv_p2 t1_1
-                                       Filter: (b = 0)
-         ->  Hash Right Join
-               Hash Cond: (t3_2.a = t1_2.a)
-               ->  Seq Scan on prt3_adv_p2 t3_2
-               ->  Hash
-                     ->  Hash Right Join
-                           Hash Cond: (t2_1.b = t1_2.a)
-                           ->  Seq Scan on prt2_adv_p1 t2_1
-                           ->  Hash
-                                 ->  Seq Scan on prt1_adv_p1 t1_2
-                                       Filter: (b = 0)
-(23 rows)
-
-SELECT t1.a, t1.c, t2.b, t2.c, t3.a, t3.c FROM prt1_adv t1 LEFT JOIN prt2_adv t2 ON (t1.a = t2.b) LEFT JOIN prt3_adv t3 ON (t1.a = t3.a) WHERE t1.b = 0 ORDER BY t1.a, t2.b, t3.a;
-  a  |  c   |  b  |  c   |  a  |  c   
------+------+-----+------+-----+------
- 100 | 0100 | 100 | 0100 |     | 
- 125 | 0125 | 125 | 0125 |     | 
- 150 | 0150 |     |      |     | 
- 175 | 0175 |     |      |     | 
- 200 | 0200 | 200 | 0200 | 200 | 0200
- 225 | 0225 | 225 | 0225 | 225 | 0225
- 250 | 0250 | 250 | 0250 | 250 | 0250
- 275 | 0275 | 275 | 0275 | 275 | 0275
-(8 rows)
-
-DROP TABLE prt1_adv;
-DROP TABLE prt2_adv;
-DROP TABLE prt3_adv;
--- Test interaction of partitioned join with partition pruning
-CREATE TABLE prt1_adv (a int, b int, c varchar) PARTITION BY RANGE (a);
-CREATE TABLE prt1_adv_p1 PARTITION OF prt1_adv FOR VALUES FROM (100) TO (200);
-CREATE TABLE prt1_adv_p2 PARTITION OF prt1_adv FOR VALUES FROM (200) TO (300);
-CREATE TABLE prt1_adv_p3 PARTITION OF prt1_adv FOR VALUES FROM (300) TO (400);
-CREATE INDEX prt1_adv_a_idx ON prt1_adv (a);
-INSERT INTO prt1_adv SELECT i, i % 25, to_char(i, 'FM0000') FROM generate_series(100, 399) i;
-ANALYZE prt1_adv;
-CREATE TABLE prt2_adv (a int, b int, c varchar) PARTITION BY RANGE (b);
-CREATE TABLE prt2_adv_p1 PARTITION OF prt2_adv FOR VALUES FROM (100) TO (200);
-CREATE TABLE prt2_adv_p2 PARTITION OF prt2_adv FOR VALUES FROM (200) TO (400);
-CREATE INDEX prt2_adv_b_idx ON prt2_adv (b);
-INSERT INTO prt2_adv SELECT i % 25, i, to_char(i, 'FM0000') FROM generate_series(100, 399) i;
-ANALYZE prt2_adv;
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1_adv t1 INNER JOIN prt2_adv t2 ON (t1.a = t2.b) WHERE t1.a < 300 AND t1.b = 0 ORDER BY t1.a, t2.b;
-                        QUERY PLAN                         
------------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Hash Join
-               Hash Cond: (t2_1.b = t1_1.a)
-               ->  Seq Scan on prt2_adv_p1 t2_1
-               ->  Hash
-                     ->  Seq Scan on prt1_adv_p1 t1_1
-                           Filter: ((a < 300) AND (b = 0))
-         ->  Hash Join
-               Hash Cond: (t2_2.b = t1_2.a)
-               ->  Seq Scan on prt2_adv_p2 t2_2
-               ->  Hash
-                     ->  Seq Scan on prt1_adv_p2 t1_2
-                           Filter: ((a < 300) AND (b = 0))
-(15 rows)
-
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1_adv t1 INNER JOIN prt2_adv t2 ON (t1.a = t2.b) WHERE t1.a < 300 AND t1.b = 0 ORDER BY t1.a, t2.b;
-  a  |  c   |  b  |  c   
------+------+-----+------
- 100 | 0100 | 100 | 0100
- 125 | 0125 | 125 | 0125
- 150 | 0150 | 150 | 0150
- 175 | 0175 | 175 | 0175
- 200 | 0200 | 200 | 0200
- 225 | 0225 | 225 | 0225
- 250 | 0250 | 250 | 0250
- 275 | 0275 | 275 | 0275
-(8 rows)
-
-DROP TABLE prt1_adv_p3;
-CREATE TABLE prt1_adv_default PARTITION OF prt1_adv DEFAULT;
-ANALYZE prt1_adv;
-CREATE TABLE prt2_adv_default PARTITION OF prt2_adv DEFAULT;
-ANALYZE prt2_adv;
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1_adv t1 INNER JOIN prt2_adv t2 ON (t1.a = t2.b) WHERE t1.a >= 100 AND t1.a < 300 AND t1.b = 0 ORDER BY t1.a, t2.b;
-                                QUERY PLAN                                
---------------------------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Hash Join
-               Hash Cond: (t2_1.b = t1_1.a)
-               ->  Seq Scan on prt2_adv_p1 t2_1
-               ->  Hash
-                     ->  Seq Scan on prt1_adv_p1 t1_1
-                           Filter: ((a >= 100) AND (a < 300) AND (b = 0))
-         ->  Hash Join
-               Hash Cond: (t2_2.b = t1_2.a)
-               ->  Seq Scan on prt2_adv_p2 t2_2
-               ->  Hash
-                     ->  Seq Scan on prt1_adv_p2 t1_2
-                           Filter: ((a >= 100) AND (a < 300) AND (b = 0))
-(15 rows)
-
-SELECT t1.a, t1.c, t2.b, t2.c FROM prt1_adv t1 INNER JOIN prt2_adv t2 ON (t1.a = t2.b) WHERE t1.a >= 100 AND t1.a < 300 AND t1.b = 0 ORDER BY t1.a, t2.b;
-  a  |  c   |  b  |  c   
------+------+-----+------
- 100 | 0100 | 100 | 0100
- 125 | 0125 | 125 | 0125
- 150 | 0150 | 150 | 0150
- 175 | 0175 | 175 | 0175
- 200 | 0200 | 200 | 0200
- 225 | 0225 | 225 | 0225
- 250 | 0250 | 250 | 0250
- 275 | 0275 | 275 | 0275
-(8 rows)
-
-DROP TABLE prt1_adv;
-DROP TABLE prt2_adv;
--- Tests for list-partitioned tables
-CREATE TABLE plt1_adv (a int, b int, c text) PARTITION BY LIST (c);
-CREATE TABLE plt1_adv_p1 PARTITION OF plt1_adv FOR VALUES IN ('0001', '0003');
-CREATE TABLE plt1_adv_p2 PARTITION OF plt1_adv FOR VALUES IN ('0004', '0006');
-CREATE TABLE plt1_adv_p3 PARTITION OF plt1_adv FOR VALUES IN ('0008', '0009');
-INSERT INTO plt1_adv SELECT i, i, to_char(i % 10, 'FM0000') FROM generate_series(1, 299) i WHERE i % 10 IN (1, 3, 4, 6, 8, 9);
-ANALYZE plt1_adv;
-CREATE TABLE plt2_adv (a int, b int, c text) PARTITION BY LIST (c);
-CREATE TABLE plt2_adv_p1 PARTITION OF plt2_adv FOR VALUES IN ('0002', '0003');
-CREATE TABLE plt2_adv_p2 PARTITION OF plt2_adv FOR VALUES IN ('0004', '0006');
-CREATE TABLE plt2_adv_p3 PARTITION OF plt2_adv FOR VALUES IN ('0007', '0009');
-INSERT INTO plt2_adv SELECT i, i, to_char(i % 10, 'FM0000') FROM generate_series(1, 299) i WHERE i % 10 IN (2, 3, 4, 6, 7, 9);
-ANALYZE plt2_adv;
--- inner join
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 INNER JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE t1.b < 10 ORDER BY t1.a;
-                             QUERY PLAN                             
---------------------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Hash Join
-               Hash Cond: ((t2_1.a = t1_1.a) AND (t2_1.c = t1_1.c))
-               ->  Seq Scan on plt2_adv_p1 t2_1
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p1 t1_1
-                           Filter: (b < 10)
-         ->  Hash Join
-               Hash Cond: ((t2_2.a = t1_2.a) AND (t2_2.c = t1_2.c))
-               ->  Seq Scan on plt2_adv_p2 t2_2
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p2 t1_2
-                           Filter: (b < 10)
-         ->  Hash Join
-               Hash Cond: ((t2_3.a = t1_3.a) AND (t2_3.c = t1_3.c))
-               ->  Seq Scan on plt2_adv_p3 t2_3
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p3 t1_3
-                           Filter: (b < 10)
-(21 rows)
-
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 INNER JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE t1.b < 10 ORDER BY t1.a;
- a |  c   | a |  c   
----+------+---+------
- 3 | 0003 | 3 | 0003
- 4 | 0004 | 4 | 0004
- 6 | 0006 | 6 | 0006
- 9 | 0009 | 9 | 0009
-(4 rows)
-
--- semi join
-EXPLAIN (COSTS OFF)
-SELECT t1.* FROM plt1_adv t1 WHERE EXISTS (SELECT 1 FROM plt2_adv t2 WHERE t1.a = t2.a AND t1.c = t2.c) AND t1.b < 10 ORDER BY t1.a;
-                             QUERY PLAN                             
---------------------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Hash Right Semi Join
-               Hash Cond: ((t2_1.a = t1_1.a) AND (t2_1.c = t1_1.c))
-               ->  Seq Scan on plt2_adv_p1 t2_1
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p1 t1_1
-                           Filter: (b < 10)
-         ->  Hash Right Semi Join
-               Hash Cond: ((t2_2.a = t1_2.a) AND (t2_2.c = t1_2.c))
-               ->  Seq Scan on plt2_adv_p2 t2_2
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p2 t1_2
-                           Filter: (b < 10)
-         ->  Hash Right Semi Join
-               Hash Cond: ((t2_3.a = t1_3.a) AND (t2_3.c = t1_3.c))
-               ->  Seq Scan on plt2_adv_p3 t2_3
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p3 t1_3
-                           Filter: (b < 10)
-(21 rows)
-
-SELECT t1.* FROM plt1_adv t1 WHERE EXISTS (SELECT 1 FROM plt2_adv t2 WHERE t1.a = t2.a AND t1.c = t2.c) AND t1.b < 10 ORDER BY t1.a;
- a | b |  c   
----+---+------
- 3 | 3 | 0003
- 4 | 4 | 0004
- 6 | 6 | 0006
- 9 | 9 | 0009
-(4 rows)
-
--- left join
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 LEFT JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE t1.b < 10 ORDER BY t1.a;
-                             QUERY PLAN                             
---------------------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Hash Right Join
-               Hash Cond: ((t2_1.a = t1_1.a) AND (t2_1.c = t1_1.c))
-               ->  Seq Scan on plt2_adv_p1 t2_1
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p1 t1_1
-                           Filter: (b < 10)
-         ->  Hash Right Join
-               Hash Cond: ((t2_2.a = t1_2.a) AND (t2_2.c = t1_2.c))
-               ->  Seq Scan on plt2_adv_p2 t2_2
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p2 t1_2
-                           Filter: (b < 10)
-         ->  Hash Right Join
-               Hash Cond: ((t2_3.a = t1_3.a) AND (t2_3.c = t1_3.c))
-               ->  Seq Scan on plt2_adv_p3 t2_3
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p3 t1_3
-                           Filter: (b < 10)
-(21 rows)
-
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 LEFT JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE t1.b < 10 ORDER BY t1.a;
- a |  c   | a |  c   
----+------+---+------
- 1 | 0001 |   | 
- 3 | 0003 | 3 | 0003
- 4 | 0004 | 4 | 0004
- 6 | 0006 | 6 | 0006
- 8 | 0008 |   | 
- 9 | 0009 | 9 | 0009
-(6 rows)
-
--- anti join
-EXPLAIN (COSTS OFF)
-SELECT t1.* FROM plt1_adv t1 WHERE NOT EXISTS (SELECT 1 FROM plt2_adv t2 WHERE t1.a = t2.a AND t1.c = t2.c) AND t1.b < 10 ORDER BY t1.a;
-                             QUERY PLAN                             
---------------------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Hash Right Anti Join
-               Hash Cond: ((t2_1.a = t1_1.a) AND (t2_1.c = t1_1.c))
-               ->  Seq Scan on plt2_adv_p1 t2_1
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p1 t1_1
-                           Filter: (b < 10)
-         ->  Hash Right Anti Join
-               Hash Cond: ((t2_2.a = t1_2.a) AND (t2_2.c = t1_2.c))
-               ->  Seq Scan on plt2_adv_p2 t2_2
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p2 t1_2
-                           Filter: (b < 10)
-         ->  Hash Right Anti Join
-               Hash Cond: ((t2_3.a = t1_3.a) AND (t2_3.c = t1_3.c))
-               ->  Seq Scan on plt2_adv_p3 t2_3
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p3 t1_3
-                           Filter: (b < 10)
-(21 rows)
-
-SELECT t1.* FROM plt1_adv t1 WHERE NOT EXISTS (SELECT 1 FROM plt2_adv t2 WHERE t1.a = t2.a AND t1.c = t2.c) AND t1.b < 10 ORDER BY t1.a;
- a | b |  c   
----+---+------
- 1 | 1 | 0001
- 8 | 8 | 0008
-(2 rows)
-
--- full join
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 FULL JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE coalesce(t1.b, 0) < 10 AND coalesce(t2.b, 0) < 10 ORDER BY t1.a, t2.a;
-                                    QUERY PLAN                                     
------------------------------------------------------------------------------------
- Sort
-   Sort Key: t1.a, t2.a
-   ->  Append
-         ->  Hash Full Join
-               Hash Cond: ((t1_1.a = t2_1.a) AND (t1_1.c = t2_1.c))
-               Filter: ((COALESCE(t1_1.b, 0) < 10) AND (COALESCE(t2_1.b, 0) < 10))
-               ->  Seq Scan on plt1_adv_p1 t1_1
-               ->  Hash
-                     ->  Seq Scan on plt2_adv_p1 t2_1
-         ->  Hash Full Join
-               Hash Cond: ((t1_2.a = t2_2.a) AND (t1_2.c = t2_2.c))
-               Filter: ((COALESCE(t1_2.b, 0) < 10) AND (COALESCE(t2_2.b, 0) < 10))
-               ->  Seq Scan on plt1_adv_p2 t1_2
-               ->  Hash
-                     ->  Seq Scan on plt2_adv_p2 t2_2
-         ->  Hash Full Join
-               Hash Cond: ((t1_3.a = t2_3.a) AND (t1_3.c = t2_3.c))
-               Filter: ((COALESCE(t1_3.b, 0) < 10) AND (COALESCE(t2_3.b, 0) < 10))
-               ->  Seq Scan on plt1_adv_p3 t1_3
-               ->  Hash
-                     ->  Seq Scan on plt2_adv_p3 t2_3
-(21 rows)
-
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 FULL JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE coalesce(t1.b, 0) < 10 AND coalesce(t2.b, 0) < 10 ORDER BY t1.a, t2.a;
- a |  c   | a |  c   
----+------+---+------
- 1 | 0001 |   | 
- 3 | 0003 | 3 | 0003
- 4 | 0004 | 4 | 0004
- 6 | 0006 | 6 | 0006
- 8 | 0008 |   | 
- 9 | 0009 | 9 | 0009
-   |      | 2 | 0002
-   |      | 7 | 0007
-(8 rows)
-
--- Test cases where one side has an extra partition
-CREATE TABLE plt2_adv_extra PARTITION OF plt2_adv FOR VALUES IN ('0000');
-INSERT INTO plt2_adv_extra VALUES (0, 0, '0000');
-ANALYZE plt2_adv;
--- inner join
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 INNER JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE t1.b < 10 ORDER BY t1.a;
-                             QUERY PLAN                             
---------------------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Hash Join
-               Hash Cond: ((t2_1.a = t1_1.a) AND (t2_1.c = t1_1.c))
-               ->  Seq Scan on plt2_adv_p1 t2_1
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p1 t1_1
-                           Filter: (b < 10)
-         ->  Hash Join
-               Hash Cond: ((t2_2.a = t1_2.a) AND (t2_2.c = t1_2.c))
-               ->  Seq Scan on plt2_adv_p2 t2_2
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p2 t1_2
-                           Filter: (b < 10)
-         ->  Hash Join
-               Hash Cond: ((t2_3.a = t1_3.a) AND (t2_3.c = t1_3.c))
-               ->  Seq Scan on plt2_adv_p3 t2_3
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p3 t1_3
-                           Filter: (b < 10)
-(21 rows)
-
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 INNER JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE t1.b < 10 ORDER BY t1.a;
- a |  c   | a |  c   
----+------+---+------
- 3 | 0003 | 3 | 0003
- 4 | 0004 | 4 | 0004
- 6 | 0006 | 6 | 0006
- 9 | 0009 | 9 | 0009
-(4 rows)
-
--- semi join
-EXPLAIN (COSTS OFF)
-SELECT t1.* FROM plt1_adv t1 WHERE EXISTS (SELECT 1 FROM plt2_adv t2 WHERE t1.a = t2.a AND t1.c = t2.c) AND t1.b < 10 ORDER BY t1.a;
-                             QUERY PLAN                             
---------------------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Hash Right Semi Join
-               Hash Cond: ((t2_1.a = t1_1.a) AND (t2_1.c = t1_1.c))
-               ->  Seq Scan on plt2_adv_p1 t2_1
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p1 t1_1
-                           Filter: (b < 10)
-         ->  Hash Right Semi Join
-               Hash Cond: ((t2_2.a = t1_2.a) AND (t2_2.c = t1_2.c))
-               ->  Seq Scan on plt2_adv_p2 t2_2
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p2 t1_2
-                           Filter: (b < 10)
-         ->  Hash Right Semi Join
-               Hash Cond: ((t2_3.a = t1_3.a) AND (t2_3.c = t1_3.c))
-               ->  Seq Scan on plt2_adv_p3 t2_3
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p3 t1_3
-                           Filter: (b < 10)
-(21 rows)
-
-SELECT t1.* FROM plt1_adv t1 WHERE EXISTS (SELECT 1 FROM plt2_adv t2 WHERE t1.a = t2.a AND t1.c = t2.c) AND t1.b < 10 ORDER BY t1.a;
- a | b |  c   
----+---+------
- 3 | 3 | 0003
- 4 | 4 | 0004
- 6 | 6 | 0006
- 9 | 9 | 0009
-(4 rows)
-
--- left join
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 LEFT JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE t1.b < 10 ORDER BY t1.a;
-                             QUERY PLAN                             
---------------------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Hash Right Join
-               Hash Cond: ((t2_1.a = t1_1.a) AND (t2_1.c = t1_1.c))
-               ->  Seq Scan on plt2_adv_p1 t2_1
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p1 t1_1
-                           Filter: (b < 10)
-         ->  Hash Right Join
-               Hash Cond: ((t2_2.a = t1_2.a) AND (t2_2.c = t1_2.c))
-               ->  Seq Scan on plt2_adv_p2 t2_2
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p2 t1_2
-                           Filter: (b < 10)
-         ->  Hash Right Join
-               Hash Cond: ((t2_3.a = t1_3.a) AND (t2_3.c = t1_3.c))
-               ->  Seq Scan on plt2_adv_p3 t2_3
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p3 t1_3
-                           Filter: (b < 10)
-(21 rows)
-
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 LEFT JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE t1.b < 10 ORDER BY t1.a;
- a |  c   | a |  c   
----+------+---+------
- 1 | 0001 |   | 
- 3 | 0003 | 3 | 0003
- 4 | 0004 | 4 | 0004
- 6 | 0006 | 6 | 0006
- 8 | 0008 |   | 
- 9 | 0009 | 9 | 0009
-(6 rows)
-
--- left join; currently we can't do partitioned join if there are no matched
--- partitions on the nullable side
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt2_adv t1 LEFT JOIN plt1_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE t1.b < 10 ORDER BY t1.a;
-                       QUERY PLAN                        
----------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Hash Right Join
-         Hash Cond: ((t2.a = t1.a) AND (t2.c = t1.c))
-         ->  Append
-               ->  Seq Scan on plt1_adv_p1 t2_1
-               ->  Seq Scan on plt1_adv_p2 t2_2
-               ->  Seq Scan on plt1_adv_p3 t2_3
-         ->  Hash
-               ->  Append
-                     ->  Seq Scan on plt2_adv_extra t1_1
-                           Filter: (b < 10)
-                     ->  Seq Scan on plt2_adv_p1 t1_2
-                           Filter: (b < 10)
-                     ->  Seq Scan on plt2_adv_p2 t1_3
-                           Filter: (b < 10)
-                     ->  Seq Scan on plt2_adv_p3 t1_4
-                           Filter: (b < 10)
-(18 rows)
-
--- anti join
-EXPLAIN (COSTS OFF)
-SELECT t1.* FROM plt1_adv t1 WHERE NOT EXISTS (SELECT 1 FROM plt2_adv t2 WHERE t1.a = t2.a AND t1.c = t2.c) AND t1.b < 10 ORDER BY t1.a;
-                             QUERY PLAN                             
---------------------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Hash Right Anti Join
-               Hash Cond: ((t2_1.a = t1_1.a) AND (t2_1.c = t1_1.c))
-               ->  Seq Scan on plt2_adv_p1 t2_1
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p1 t1_1
-                           Filter: (b < 10)
-         ->  Hash Right Anti Join
-               Hash Cond: ((t2_2.a = t1_2.a) AND (t2_2.c = t1_2.c))
-               ->  Seq Scan on plt2_adv_p2 t2_2
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p2 t1_2
-                           Filter: (b < 10)
-         ->  Hash Right Anti Join
-               Hash Cond: ((t2_3.a = t1_3.a) AND (t2_3.c = t1_3.c))
-               ->  Seq Scan on plt2_adv_p3 t2_3
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p3 t1_3
-                           Filter: (b < 10)
-(21 rows)
-
-SELECT t1.* FROM plt1_adv t1 WHERE NOT EXISTS (SELECT 1 FROM plt2_adv t2 WHERE t1.a = t2.a AND t1.c = t2.c) AND t1.b < 10 ORDER BY t1.a;
- a | b |  c   
----+---+------
- 1 | 1 | 0001
- 8 | 8 | 0008
-(2 rows)
-
--- anti join; currently we can't do partitioned join if there are no matched
--- partitions on the nullable side
-EXPLAIN (COSTS OFF)
-SELECT t1.* FROM plt2_adv t1 WHERE NOT EXISTS (SELECT 1 FROM plt1_adv t2 WHERE t1.a = t2.a AND t1.c = t2.c) AND t1.b < 10 ORDER BY t1.a;
-                       QUERY PLAN                        
----------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Hash Right Anti Join
-         Hash Cond: ((t2.a = t1.a) AND (t2.c = t1.c))
-         ->  Append
-               ->  Seq Scan on plt1_adv_p1 t2_1
-               ->  Seq Scan on plt1_adv_p2 t2_2
-               ->  Seq Scan on plt1_adv_p3 t2_3
-         ->  Hash
-               ->  Append
-                     ->  Seq Scan on plt2_adv_extra t1_1
-                           Filter: (b < 10)
-                     ->  Seq Scan on plt2_adv_p1 t1_2
-                           Filter: (b < 10)
-                     ->  Seq Scan on plt2_adv_p2 t1_3
-                           Filter: (b < 10)
-                     ->  Seq Scan on plt2_adv_p3 t1_4
-                           Filter: (b < 10)
-(18 rows)
-
--- full join; currently we can't do partitioned join if there are no matched
--- partitions on the nullable side
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 FULL JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE coalesce(t1.b, 0) < 10 AND coalesce(t2.b, 0) < 10 ORDER BY t1.a, t2.a;
-                               QUERY PLAN                                
--------------------------------------------------------------------------
- Sort
-   Sort Key: t1.a, t2.a
-   ->  Hash Full Join
-         Hash Cond: ((t2.a = t1.a) AND (t2.c = t1.c))
-         Filter: ((COALESCE(t1.b, 0) < 10) AND (COALESCE(t2.b, 0) < 10))
-         ->  Append
-               ->  Seq Scan on plt2_adv_extra t2_1
-               ->  Seq Scan on plt2_adv_p1 t2_2
-               ->  Seq Scan on plt2_adv_p2 t2_3
-               ->  Seq Scan on plt2_adv_p3 t2_4
-         ->  Hash
-               ->  Append
-                     ->  Seq Scan on plt1_adv_p1 t1_1
-                     ->  Seq Scan on plt1_adv_p2 t1_2
-                     ->  Seq Scan on plt1_adv_p3 t1_3
-(15 rows)
-
-DROP TABLE plt2_adv_extra;
--- Test cases where a partition on one side matches multiple partitions on
--- the other side; we currently can't do partitioned join in such cases
-ALTER TABLE plt2_adv DETACH PARTITION plt2_adv_p2;
--- Split plt2_adv_p2 into two partitions so that plt1_adv_p2 matches both
-CREATE TABLE plt2_adv_p2_1 PARTITION OF plt2_adv FOR VALUES IN ('0004');
-CREATE TABLE plt2_adv_p2_2 PARTITION OF plt2_adv FOR VALUES IN ('0006');
-INSERT INTO plt2_adv SELECT i, i, to_char(i % 10, 'FM0000') FROM generate_series(1, 299) i WHERE i % 10 IN (4, 6);
-ANALYZE plt2_adv;
--- inner join
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 INNER JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE t1.b < 10 ORDER BY t1.a;
-                      QUERY PLAN                      
-------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Hash Join
-         Hash Cond: ((t2.a = t1.a) AND (t2.c = t1.c))
-         ->  Append
-               ->  Seq Scan on plt2_adv_p1 t2_1
-               ->  Seq Scan on plt2_adv_p2_1 t2_2
-               ->  Seq Scan on plt2_adv_p2_2 t2_3
-               ->  Seq Scan on plt2_adv_p3 t2_4
-         ->  Hash
-               ->  Append
-                     ->  Seq Scan on plt1_adv_p1 t1_1
-                           Filter: (b < 10)
-                     ->  Seq Scan on plt1_adv_p2 t1_2
-                           Filter: (b < 10)
-                     ->  Seq Scan on plt1_adv_p3 t1_3
-                           Filter: (b < 10)
-(17 rows)
-
--- semi join
-EXPLAIN (COSTS OFF)
-SELECT t1.* FROM plt1_adv t1 WHERE EXISTS (SELECT 1 FROM plt2_adv t2 WHERE t1.a = t2.a AND t1.c = t2.c) AND t1.b < 10 ORDER BY t1.a;
-                      QUERY PLAN                      
-------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Hash Right Semi Join
-         Hash Cond: ((t2.a = t1.a) AND (t2.c = t1.c))
-         ->  Append
-               ->  Seq Scan on plt2_adv_p1 t2_1
-               ->  Seq Scan on plt2_adv_p2_1 t2_2
-               ->  Seq Scan on plt2_adv_p2_2 t2_3
-               ->  Seq Scan on plt2_adv_p3 t2_4
-         ->  Hash
-               ->  Append
-                     ->  Seq Scan on plt1_adv_p1 t1_1
-                           Filter: (b < 10)
-                     ->  Seq Scan on plt1_adv_p2 t1_2
-                           Filter: (b < 10)
-                     ->  Seq Scan on plt1_adv_p3 t1_3
-                           Filter: (b < 10)
-(17 rows)
-
--- left join
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 LEFT JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE t1.b < 10 ORDER BY t1.a;
-                      QUERY PLAN                      
-------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Hash Right Join
-         Hash Cond: ((t2.a = t1.a) AND (t2.c = t1.c))
-         ->  Append
-               ->  Seq Scan on plt2_adv_p1 t2_1
-               ->  Seq Scan on plt2_adv_p2_1 t2_2
-               ->  Seq Scan on plt2_adv_p2_2 t2_3
-               ->  Seq Scan on plt2_adv_p3 t2_4
-         ->  Hash
-               ->  Append
-                     ->  Seq Scan on plt1_adv_p1 t1_1
-                           Filter: (b < 10)
-                     ->  Seq Scan on plt1_adv_p2 t1_2
-                           Filter: (b < 10)
-                     ->  Seq Scan on plt1_adv_p3 t1_3
-                           Filter: (b < 10)
-(17 rows)
-
--- anti join
-EXPLAIN (COSTS OFF)
-SELECT t1.* FROM plt1_adv t1 WHERE NOT EXISTS (SELECT 1 FROM plt2_adv t2 WHERE t1.a = t2.a AND t1.c = t2.c) AND t1.b < 10 ORDER BY t1.a;
-                      QUERY PLAN                      
-------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Hash Right Anti Join
-         Hash Cond: ((t2.a = t1.a) AND (t2.c = t1.c))
-         ->  Append
-               ->  Seq Scan on plt2_adv_p1 t2_1
-               ->  Seq Scan on plt2_adv_p2_1 t2_2
-               ->  Seq Scan on plt2_adv_p2_2 t2_3
-               ->  Seq Scan on plt2_adv_p3 t2_4
-         ->  Hash
-               ->  Append
-                     ->  Seq Scan on plt1_adv_p1 t1_1
-                           Filter: (b < 10)
-                     ->  Seq Scan on plt1_adv_p2 t1_2
-                           Filter: (b < 10)
-                     ->  Seq Scan on plt1_adv_p3 t1_3
-                           Filter: (b < 10)
-(17 rows)
-
--- full join
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 FULL JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE coalesce(t1.b, 0) < 10 AND coalesce(t2.b, 0) < 10 ORDER BY t1.a, t2.a;
-                               QUERY PLAN                                
--------------------------------------------------------------------------
- Sort
-   Sort Key: t1.a, t2.a
-   ->  Hash Full Join
-         Hash Cond: ((t2.a = t1.a) AND (t2.c = t1.c))
-         Filter: ((COALESCE(t1.b, 0) < 10) AND (COALESCE(t2.b, 0) < 10))
-         ->  Append
-               ->  Seq Scan on plt2_adv_p1 t2_1
-               ->  Seq Scan on plt2_adv_p2_1 t2_2
-               ->  Seq Scan on plt2_adv_p2_2 t2_3
-               ->  Seq Scan on plt2_adv_p3 t2_4
-         ->  Hash
-               ->  Append
-                     ->  Seq Scan on plt1_adv_p1 t1_1
-                     ->  Seq Scan on plt1_adv_p2 t1_2
-                     ->  Seq Scan on plt1_adv_p3 t1_3
-(15 rows)
-
-DROP TABLE plt2_adv_p2_1;
-DROP TABLE plt2_adv_p2_2;
--- Restore plt2_adv_p2
-ALTER TABLE plt2_adv ATTACH PARTITION plt2_adv_p2 FOR VALUES IN ('0004', '0006');
--- Test NULL partitions
-ALTER TABLE plt1_adv DETACH PARTITION plt1_adv_p1;
--- Change plt1_adv_p1 to the NULL partition
-CREATE TABLE plt1_adv_p1_null PARTITION OF plt1_adv FOR VALUES IN (NULL, '0001', '0003');
-INSERT INTO plt1_adv SELECT i, i, to_char(i % 10, 'FM0000') FROM generate_series(1, 299) i WHERE i % 10 IN (1, 3);
-INSERT INTO plt1_adv VALUES (-1, -1, NULL);
-ANALYZE plt1_adv;
-ALTER TABLE plt2_adv DETACH PARTITION plt2_adv_p3;
--- Change plt2_adv_p3 to the NULL partition
-CREATE TABLE plt2_adv_p3_null PARTITION OF plt2_adv FOR VALUES IN (NULL, '0007', '0009');
-INSERT INTO plt2_adv SELECT i, i, to_char(i % 10, 'FM0000') FROM generate_series(1, 299) i WHERE i % 10 IN (7, 9);
-INSERT INTO plt2_adv VALUES (-1, -1, NULL);
-ANALYZE plt2_adv;
--- inner join
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 INNER JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE t1.b < 10 ORDER BY t1.a;
-                             QUERY PLAN                             
---------------------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Hash Join
-               Hash Cond: ((t2_1.a = t1_1.a) AND (t2_1.c = t1_1.c))
-               ->  Seq Scan on plt2_adv_p1 t2_1
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p1_null t1_1
-                           Filter: (b < 10)
-         ->  Hash Join
-               Hash Cond: ((t2_2.a = t1_2.a) AND (t2_2.c = t1_2.c))
-               ->  Seq Scan on plt2_adv_p2 t2_2
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p2 t1_2
-                           Filter: (b < 10)
-         ->  Hash Join
-               Hash Cond: ((t2_3.a = t1_3.a) AND (t2_3.c = t1_3.c))
-               ->  Seq Scan on plt2_adv_p3_null t2_3
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p3 t1_3
-                           Filter: (b < 10)
-(21 rows)
-
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 INNER JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE t1.b < 10 ORDER BY t1.a;
- a |  c   | a |  c   
----+------+---+------
- 3 | 0003 | 3 | 0003
- 4 | 0004 | 4 | 0004
- 6 | 0006 | 6 | 0006
- 9 | 0009 | 9 | 0009
-(4 rows)
-
--- semi join
-EXPLAIN (COSTS OFF)
-SELECT t1.* FROM plt1_adv t1 WHERE EXISTS (SELECT 1 FROM plt2_adv t2 WHERE t1.a = t2.a AND t1.c = t2.c) AND t1.b < 10 ORDER BY t1.a;
-                             QUERY PLAN                             
---------------------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Hash Right Semi Join
-               Hash Cond: ((t2_1.a = t1_1.a) AND (t2_1.c = t1_1.c))
-               ->  Seq Scan on plt2_adv_p1 t2_1
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p1_null t1_1
-                           Filter: (b < 10)
-         ->  Hash Right Semi Join
-               Hash Cond: ((t2_2.a = t1_2.a) AND (t2_2.c = t1_2.c))
-               ->  Seq Scan on plt2_adv_p2 t2_2
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p2 t1_2
-                           Filter: (b < 10)
-         ->  Hash Right Semi Join
-               Hash Cond: ((t2_3.a = t1_3.a) AND (t2_3.c = t1_3.c))
-               ->  Seq Scan on plt2_adv_p3_null t2_3
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p3 t1_3
-                           Filter: (b < 10)
-(21 rows)
-
-SELECT t1.* FROM plt1_adv t1 WHERE EXISTS (SELECT 1 FROM plt2_adv t2 WHERE t1.a = t2.a AND t1.c = t2.c) AND t1.b < 10 ORDER BY t1.a;
- a | b |  c   
----+---+------
- 3 | 3 | 0003
- 4 | 4 | 0004
- 6 | 6 | 0006
- 9 | 9 | 0009
-(4 rows)
-
--- left join
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 LEFT JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE t1.b < 10 ORDER BY t1.a;
-                             QUERY PLAN                             
---------------------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Hash Right Join
-               Hash Cond: ((t2_1.a = t1_1.a) AND (t2_1.c = t1_1.c))
-               ->  Seq Scan on plt2_adv_p1 t2_1
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p1_null t1_1
-                           Filter: (b < 10)
-         ->  Hash Right Join
-               Hash Cond: ((t2_2.a = t1_2.a) AND (t2_2.c = t1_2.c))
-               ->  Seq Scan on plt2_adv_p2 t2_2
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p2 t1_2
-                           Filter: (b < 10)
-         ->  Hash Right Join
-               Hash Cond: ((t2_3.a = t1_3.a) AND (t2_3.c = t1_3.c))
-               ->  Seq Scan on plt2_adv_p3_null t2_3
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p3 t1_3
-                           Filter: (b < 10)
-(21 rows)
-
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 LEFT JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE t1.b < 10 ORDER BY t1.a;
- a  |  c   | a |  c   
-----+------+---+------
- -1 |      |   | 
-  1 | 0001 |   | 
-  3 | 0003 | 3 | 0003
-  4 | 0004 | 4 | 0004
-  6 | 0006 | 6 | 0006
-  8 | 0008 |   | 
-  9 | 0009 | 9 | 0009
-(7 rows)
-
--- anti join
-EXPLAIN (COSTS OFF)
-SELECT t1.* FROM plt1_adv t1 WHERE NOT EXISTS (SELECT 1 FROM plt2_adv t2 WHERE t1.a = t2.a AND t1.c = t2.c) AND t1.b < 10 ORDER BY t1.a;
-                             QUERY PLAN                             
---------------------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Hash Right Anti Join
-               Hash Cond: ((t2_1.a = t1_1.a) AND (t2_1.c = t1_1.c))
-               ->  Seq Scan on plt2_adv_p1 t2_1
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p1_null t1_1
-                           Filter: (b < 10)
-         ->  Hash Right Anti Join
-               Hash Cond: ((t2_2.a = t1_2.a) AND (t2_2.c = t1_2.c))
-               ->  Seq Scan on plt2_adv_p2 t2_2
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p2 t1_2
-                           Filter: (b < 10)
-         ->  Hash Right Anti Join
-               Hash Cond: ((t2_3.a = t1_3.a) AND (t2_3.c = t1_3.c))
-               ->  Seq Scan on plt2_adv_p3_null t2_3
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p3 t1_3
-                           Filter: (b < 10)
-(21 rows)
-
-SELECT t1.* FROM plt1_adv t1 WHERE NOT EXISTS (SELECT 1 FROM plt2_adv t2 WHERE t1.a = t2.a AND t1.c = t2.c) AND t1.b < 10 ORDER BY t1.a;
- a  | b  |  c   
-----+----+------
- -1 | -1 | 
-  1 |  1 | 0001
-  8 |  8 | 0008
-(3 rows)
-
--- full join
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 FULL JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE coalesce(t1.b, 0) < 10 AND coalesce(t2.b, 0) < 10 ORDER BY t1.a, t2.a;
-                                    QUERY PLAN                                     
------------------------------------------------------------------------------------
- Sort
-   Sort Key: t1.a, t2.a
-   ->  Append
-         ->  Hash Full Join
-               Hash Cond: ((t1_1.a = t2_1.a) AND (t1_1.c = t2_1.c))
-               Filter: ((COALESCE(t1_1.b, 0) < 10) AND (COALESCE(t2_1.b, 0) < 10))
-               ->  Seq Scan on plt1_adv_p1_null t1_1
-               ->  Hash
-                     ->  Seq Scan on plt2_adv_p1 t2_1
-         ->  Hash Full Join
-               Hash Cond: ((t1_2.a = t2_2.a) AND (t1_2.c = t2_2.c))
-               Filter: ((COALESCE(t1_2.b, 0) < 10) AND (COALESCE(t2_2.b, 0) < 10))
-               ->  Seq Scan on plt1_adv_p2 t1_2
-               ->  Hash
-                     ->  Seq Scan on plt2_adv_p2 t2_2
-         ->  Hash Full Join
-               Hash Cond: ((t2_3.a = t1_3.a) AND (t2_3.c = t1_3.c))
-               Filter: ((COALESCE(t1_3.b, 0) < 10) AND (COALESCE(t2_3.b, 0) < 10))
-               ->  Seq Scan on plt2_adv_p3_null t2_3
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p3 t1_3
-(21 rows)
-
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 FULL JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE coalesce(t1.b, 0) < 10 AND coalesce(t2.b, 0) < 10 ORDER BY t1.a, t2.a;
- a  |  c   | a  |  c   
-----+------+----+------
- -1 |      |    | 
-  1 | 0001 |    | 
-  3 | 0003 |  3 | 0003
-  4 | 0004 |  4 | 0004
-  6 | 0006 |  6 | 0006
-  8 | 0008 |    | 
-  9 | 0009 |  9 | 0009
-    |      | -1 | 
-    |      |  2 | 0002
-    |      |  7 | 0007
-(10 rows)
-
-DROP TABLE plt1_adv_p1_null;
--- Restore plt1_adv_p1
-ALTER TABLE plt1_adv ATTACH PARTITION plt1_adv_p1 FOR VALUES IN ('0001', '0003');
--- Add to plt1_adv the extra NULL partition containing only NULL values as the
--- key values
-CREATE TABLE plt1_adv_extra PARTITION OF plt1_adv FOR VALUES IN (NULL);
-INSERT INTO plt1_adv VALUES (-1, -1, NULL);
-ANALYZE plt1_adv;
-DROP TABLE plt2_adv_p3_null;
--- Restore plt2_adv_p3
-ALTER TABLE plt2_adv ATTACH PARTITION plt2_adv_p3 FOR VALUES IN ('0007', '0009');
-ANALYZE plt2_adv;
--- inner join
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 INNER JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE t1.b < 10 ORDER BY t1.a;
-                             QUERY PLAN                             
---------------------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Hash Join
-               Hash Cond: ((t2_1.a = t1_1.a) AND (t2_1.c = t1_1.c))
-               ->  Seq Scan on plt2_adv_p1 t2_1
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p1 t1_1
-                           Filter: (b < 10)
-         ->  Hash Join
-               Hash Cond: ((t2_2.a = t1_2.a) AND (t2_2.c = t1_2.c))
-               ->  Seq Scan on plt2_adv_p2 t2_2
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p2 t1_2
-                           Filter: (b < 10)
-         ->  Hash Join
-               Hash Cond: ((t2_3.a = t1_3.a) AND (t2_3.c = t1_3.c))
-               ->  Seq Scan on plt2_adv_p3 t2_3
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p3 t1_3
-                           Filter: (b < 10)
-(21 rows)
-
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 INNER JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE t1.b < 10 ORDER BY t1.a;
- a |  c   | a |  c   
----+------+---+------
- 3 | 0003 | 3 | 0003
- 4 | 0004 | 4 | 0004
- 6 | 0006 | 6 | 0006
- 9 | 0009 | 9 | 0009
-(4 rows)
-
--- left join; currently we can't do partitioned join if there are no matched
--- partitions on the nullable side
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 LEFT JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE t1.b < 10 ORDER BY t1.a;
-                       QUERY PLAN                        
----------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Hash Right Join
-         Hash Cond: ((t2.a = t1.a) AND (t2.c = t1.c))
-         ->  Append
-               ->  Seq Scan on plt2_adv_p1 t2_1
-               ->  Seq Scan on plt2_adv_p2 t2_2
-               ->  Seq Scan on plt2_adv_p3 t2_3
-         ->  Hash
-               ->  Append
-                     ->  Seq Scan on plt1_adv_p1 t1_1
-                           Filter: (b < 10)
-                     ->  Seq Scan on plt1_adv_p2 t1_2
-                           Filter: (b < 10)
-                     ->  Seq Scan on plt1_adv_p3 t1_3
-                           Filter: (b < 10)
-                     ->  Seq Scan on plt1_adv_extra t1_4
-                           Filter: (b < 10)
-(18 rows)
-
--- full join; currently we can't do partitioned join if there are no matched
--- partitions on the nullable side
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 FULL JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE coalesce(t1.b, 0) < 10 AND coalesce(t2.b, 0) < 10 ORDER BY t1.a, t2.a;
-                               QUERY PLAN                                
--------------------------------------------------------------------------
- Sort
-   Sort Key: t1.a, t2.a
-   ->  Hash Full Join
-         Hash Cond: ((t1.a = t2.a) AND (t1.c = t2.c))
-         Filter: ((COALESCE(t1.b, 0) < 10) AND (COALESCE(t2.b, 0) < 10))
-         ->  Append
-               ->  Seq Scan on plt1_adv_p1 t1_1
-               ->  Seq Scan on plt1_adv_p2 t1_2
-               ->  Seq Scan on plt1_adv_p3 t1_3
-               ->  Seq Scan on plt1_adv_extra t1_4
-         ->  Hash
-               ->  Append
-                     ->  Seq Scan on plt2_adv_p1 t2_1
-                     ->  Seq Scan on plt2_adv_p2 t2_2
-                     ->  Seq Scan on plt2_adv_p3 t2_3
-(15 rows)
-
--- Add to plt2_adv the extra NULL partition containing only NULL values as the
--- key values
-CREATE TABLE plt2_adv_extra PARTITION OF plt2_adv FOR VALUES IN (NULL);
-INSERT INTO plt2_adv VALUES (-1, -1, NULL);
-ANALYZE plt2_adv;
--- inner join
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 INNER JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE t1.b < 10 ORDER BY t1.a;
-                             QUERY PLAN                             
---------------------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Hash Join
-               Hash Cond: ((t2_1.a = t1_1.a) AND (t2_1.c = t1_1.c))
-               ->  Seq Scan on plt2_adv_p1 t2_1
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p1 t1_1
-                           Filter: (b < 10)
-         ->  Hash Join
-               Hash Cond: ((t2_2.a = t1_2.a) AND (t2_2.c = t1_2.c))
-               ->  Seq Scan on plt2_adv_p2 t2_2
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p2 t1_2
-                           Filter: (b < 10)
-         ->  Hash Join
-               Hash Cond: ((t2_3.a = t1_3.a) AND (t2_3.c = t1_3.c))
-               ->  Seq Scan on plt2_adv_p3 t2_3
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p3 t1_3
-                           Filter: (b < 10)
-(21 rows)
-
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 INNER JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE t1.b < 10 ORDER BY t1.a;
- a |  c   | a |  c   
----+------+---+------
- 3 | 0003 | 3 | 0003
- 4 | 0004 | 4 | 0004
- 6 | 0006 | 6 | 0006
- 9 | 0009 | 9 | 0009
-(4 rows)
-
--- left join
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 LEFT JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE t1.b < 10 ORDER BY t1.a;
-                              QUERY PLAN                              
-----------------------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Hash Right Join
-               Hash Cond: ((t2_1.a = t1_1.a) AND (t2_1.c = t1_1.c))
-               ->  Seq Scan on plt2_adv_p1 t2_1
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p1 t1_1
-                           Filter: (b < 10)
-         ->  Hash Right Join
-               Hash Cond: ((t2_2.a = t1_2.a) AND (t2_2.c = t1_2.c))
-               ->  Seq Scan on plt2_adv_p2 t2_2
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p2 t1_2
-                           Filter: (b < 10)
-         ->  Hash Right Join
-               Hash Cond: ((t2_3.a = t1_3.a) AND (t2_3.c = t1_3.c))
-               ->  Seq Scan on plt2_adv_p3 t2_3
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p3 t1_3
-                           Filter: (b < 10)
-         ->  Nested Loop Left Join
-               Join Filter: ((t1_4.a = t2_4.a) AND (t1_4.c = t2_4.c))
-               ->  Seq Scan on plt1_adv_extra t1_4
-                     Filter: (b < 10)
-               ->  Seq Scan on plt2_adv_extra t2_4
-(26 rows)
-
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 LEFT JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE t1.b < 10 ORDER BY t1.a;
- a  |  c   | a |  c   
-----+------+---+------
- -1 |      |   | 
-  1 | 0001 |   | 
-  3 | 0003 | 3 | 0003
-  4 | 0004 | 4 | 0004
-  6 | 0006 | 6 | 0006
-  8 | 0008 |   | 
-  9 | 0009 | 9 | 0009
-(7 rows)
-
--- full join
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 FULL JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE coalesce(t1.b, 0) < 10 AND coalesce(t2.b, 0) < 10 ORDER BY t1.a, t2.a;
-                                    QUERY PLAN                                     
------------------------------------------------------------------------------------
- Sort
-   Sort Key: t1.a, t2.a
-   ->  Append
-         ->  Hash Full Join
-               Hash Cond: ((t1_1.a = t2_1.a) AND (t1_1.c = t2_1.c))
-               Filter: ((COALESCE(t1_1.b, 0) < 10) AND (COALESCE(t2_1.b, 0) < 10))
-               ->  Seq Scan on plt1_adv_p1 t1_1
-               ->  Hash
-                     ->  Seq Scan on plt2_adv_p1 t2_1
-         ->  Hash Full Join
-               Hash Cond: ((t1_2.a = t2_2.a) AND (t1_2.c = t2_2.c))
-               Filter: ((COALESCE(t1_2.b, 0) < 10) AND (COALESCE(t2_2.b, 0) < 10))
-               ->  Seq Scan on plt1_adv_p2 t1_2
-               ->  Hash
-                     ->  Seq Scan on plt2_adv_p2 t2_2
-         ->  Hash Full Join
-               Hash Cond: ((t1_3.a = t2_3.a) AND (t1_3.c = t2_3.c))
-               Filter: ((COALESCE(t1_3.b, 0) < 10) AND (COALESCE(t2_3.b, 0) < 10))
-               ->  Seq Scan on plt1_adv_p3 t1_3
-               ->  Hash
-                     ->  Seq Scan on plt2_adv_p3 t2_3
-         ->  Hash Full Join
-               Hash Cond: ((t1_4.a = t2_4.a) AND (t1_4.c = t2_4.c))
-               Filter: ((COALESCE(t1_4.b, 0) < 10) AND (COALESCE(t2_4.b, 0) < 10))
-               ->  Seq Scan on plt1_adv_extra t1_4
-               ->  Hash
-                     ->  Seq Scan on plt2_adv_extra t2_4
-(27 rows)
-
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 FULL JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE coalesce(t1.b, 0) < 10 AND coalesce(t2.b, 0) < 10 ORDER BY t1.a, t2.a;
- a  |  c   | a  |  c   
-----+------+----+------
- -1 |      |    | 
-  1 | 0001 |    | 
-  3 | 0003 |  3 | 0003
-  4 | 0004 |  4 | 0004
-  6 | 0006 |  6 | 0006
-  8 | 0008 |    | 
-  9 | 0009 |  9 | 0009
-    |      | -1 | 
-    |      |  2 | 0002
-    |      |  7 | 0007
-(10 rows)
-
--- 3-way join to test the NULL partition of a join relation
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.a, t2.c, t3.a, t3.c FROM plt1_adv t1 LEFT JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) LEFT JOIN plt1_adv t3 ON (t1.a = t3.a AND t1.c = t3.c) WHERE t1.b < 10 ORDER BY t1.a;
-                                   QUERY PLAN                                   
---------------------------------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Hash Right Join
-               Hash Cond: ((t3_1.a = t1_1.a) AND (t3_1.c = t1_1.c))
-               ->  Seq Scan on plt1_adv_p1 t3_1
-               ->  Hash
-                     ->  Hash Right Join
-                           Hash Cond: ((t2_1.a = t1_1.a) AND (t2_1.c = t1_1.c))
-                           ->  Seq Scan on plt2_adv_p1 t2_1
-                           ->  Hash
-                                 ->  Seq Scan on plt1_adv_p1 t1_1
-                                       Filter: (b < 10)
-         ->  Hash Right Join
-               Hash Cond: ((t3_2.a = t1_2.a) AND (t3_2.c = t1_2.c))
-               ->  Seq Scan on plt1_adv_p2 t3_2
-               ->  Hash
-                     ->  Hash Right Join
-                           Hash Cond: ((t2_2.a = t1_2.a) AND (t2_2.c = t1_2.c))
-                           ->  Seq Scan on plt2_adv_p2 t2_2
-                           ->  Hash
-                                 ->  Seq Scan on plt1_adv_p2 t1_2
-                                       Filter: (b < 10)
-         ->  Hash Right Join
-               Hash Cond: ((t3_3.a = t1_3.a) AND (t3_3.c = t1_3.c))
-               ->  Seq Scan on plt1_adv_p3 t3_3
-               ->  Hash
-                     ->  Hash Right Join
-                           Hash Cond: ((t2_3.a = t1_3.a) AND (t2_3.c = t1_3.c))
-                           ->  Seq Scan on plt2_adv_p3 t2_3
-                           ->  Hash
-                                 ->  Seq Scan on plt1_adv_p3 t1_3
-                                       Filter: (b < 10)
-         ->  Nested Loop Left Join
-               Join Filter: ((t1_4.a = t3_4.a) AND (t1_4.c = t3_4.c))
-               ->  Nested Loop Left Join
-                     Join Filter: ((t1_4.a = t2_4.a) AND (t1_4.c = t2_4.c))
-                     ->  Seq Scan on plt1_adv_extra t1_4
-                           Filter: (b < 10)
-                     ->  Seq Scan on plt2_adv_extra t2_4
-               ->  Seq Scan on plt1_adv_extra t3_4
-(41 rows)
-
-SELECT t1.a, t1.c, t2.a, t2.c, t3.a, t3.c FROM plt1_adv t1 LEFT JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) LEFT JOIN plt1_adv t3 ON (t1.a = t3.a AND t1.c = t3.c) WHERE t1.b < 10 ORDER BY t1.a;
- a  |  c   | a |  c   | a |  c   
-----+------+---+------+---+------
- -1 |      |   |      |   | 
-  1 | 0001 |   |      | 1 | 0001
-  3 | 0003 | 3 | 0003 | 3 | 0003
-  4 | 0004 | 4 | 0004 | 4 | 0004
-  6 | 0006 | 6 | 0006 | 6 | 0006
-  8 | 0008 |   |      | 8 | 0008
-  9 | 0009 | 9 | 0009 | 9 | 0009
-(7 rows)
-
-DROP TABLE plt1_adv_extra;
-DROP TABLE plt2_adv_extra;
--- Test default partitions
-ALTER TABLE plt1_adv DETACH PARTITION plt1_adv_p1;
--- Change plt1_adv_p1 to the default partition
-ALTER TABLE plt1_adv ATTACH PARTITION plt1_adv_p1 DEFAULT;
-DROP TABLE plt1_adv_p3;
-ANALYZE plt1_adv;
-DROP TABLE plt2_adv_p3;
-ANALYZE plt2_adv;
--- We can do partitioned join even if only one of relations has the default
--- partition
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 INNER JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE t1.b < 10 ORDER BY t1.a;
-                             QUERY PLAN                             
---------------------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Hash Join
-               Hash Cond: ((t2_1.a = t1_2.a) AND (t2_1.c = t1_2.c))
-               ->  Seq Scan on plt2_adv_p1 t2_1
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p1 t1_2
-                           Filter: (b < 10)
-         ->  Hash Join
-               Hash Cond: ((t2_2.a = t1_1.a) AND (t2_2.c = t1_1.c))
-               ->  Seq Scan on plt2_adv_p2 t2_2
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p2 t1_1
-                           Filter: (b < 10)
-(15 rows)
-
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 INNER JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE t1.b < 10 ORDER BY t1.a;
- a |  c   | a |  c   
----+------+---+------
- 3 | 0003 | 3 | 0003
- 4 | 0004 | 4 | 0004
- 6 | 0006 | 6 | 0006
-(3 rows)
-
-ALTER TABLE plt2_adv DETACH PARTITION plt2_adv_p2;
--- Change plt2_adv_p2 to contain '0005' in addition to '0004' and '0006' as
--- the key values
-CREATE TABLE plt2_adv_p2_ext PARTITION OF plt2_adv FOR VALUES IN ('0004', '0005', '0006');
-INSERT INTO plt2_adv SELECT i, i, to_char(i % 10, 'FM0000') FROM generate_series(1, 299) i WHERE i % 10 IN (4, 5, 6);
-ANALYZE plt2_adv;
--- Partitioned join can't be applied because the default partition of plt1_adv
--- matches plt2_adv_p1 and plt2_adv_p2_ext
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 INNER JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE t1.b < 10 ORDER BY t1.a;
-                      QUERY PLAN                      
-------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Hash Join
-         Hash Cond: ((t2.a = t1.a) AND (t2.c = t1.c))
-         ->  Append
-               ->  Seq Scan on plt2_adv_p1 t2_1
-               ->  Seq Scan on plt2_adv_p2_ext t2_2
-         ->  Hash
-               ->  Append
-                     ->  Seq Scan on plt1_adv_p2 t1_1
-                           Filter: (b < 10)
-                     ->  Seq Scan on plt1_adv_p1 t1_2
-                           Filter: (b < 10)
-(13 rows)
-
-ALTER TABLE plt2_adv DETACH PARTITION plt2_adv_p2_ext;
--- Change plt2_adv_p2_ext to the default partition
-ALTER TABLE plt2_adv ATTACH PARTITION plt2_adv_p2_ext DEFAULT;
-ANALYZE plt2_adv;
--- Partitioned join can't be applied because the default partition of plt1_adv
--- matches plt2_adv_p1 and plt2_adv_p2_ext
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 INNER JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE t1.b < 10 ORDER BY t1.a;
-                      QUERY PLAN                      
-------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Hash Join
-         Hash Cond: ((t2.a = t1.a) AND (t2.c = t1.c))
-         ->  Append
-               ->  Seq Scan on plt2_adv_p1 t2_1
-               ->  Seq Scan on plt2_adv_p2_ext t2_2
-         ->  Hash
-               ->  Append
-                     ->  Seq Scan on plt1_adv_p2 t1_1
-                           Filter: (b < 10)
-                     ->  Seq Scan on plt1_adv_p1 t1_2
-                           Filter: (b < 10)
-(13 rows)
-
-DROP TABLE plt2_adv_p2_ext;
--- Restore plt2_adv_p2
-ALTER TABLE plt2_adv ATTACH PARTITION plt2_adv_p2 FOR VALUES IN ('0004', '0006');
-ANALYZE plt2_adv;
-CREATE TABLE plt3_adv (a int, b int, c text) PARTITION BY LIST (c);
-CREATE TABLE plt3_adv_p1 PARTITION OF plt3_adv FOR VALUES IN ('0004', '0006');
-CREATE TABLE plt3_adv_p2 PARTITION OF plt3_adv FOR VALUES IN ('0007', '0009');
-INSERT INTO plt3_adv SELECT i, i, to_char(i % 10, 'FM0000') FROM generate_series(1, 299) i WHERE i % 10 IN (4, 6, 7, 9);
-ANALYZE plt3_adv;
--- 3-way join to test the default partition of a join relation
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.a, t2.c, t3.a, t3.c FROM plt1_adv t1 LEFT JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) LEFT JOIN plt3_adv t3 ON (t1.a = t3.a AND t1.c = t3.c) WHERE t1.b < 10 ORDER BY t1.a;
-                                   QUERY PLAN                                   
---------------------------------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Hash Right Join
-               Hash Cond: ((t3_1.a = t1_1.a) AND (t3_1.c = t1_1.c))
-               ->  Seq Scan on plt3_adv_p1 t3_1
-               ->  Hash
-                     ->  Hash Right Join
-                           Hash Cond: ((t2_2.a = t1_1.a) AND (t2_2.c = t1_1.c))
-                           ->  Seq Scan on plt2_adv_p2 t2_2
-                           ->  Hash
-                                 ->  Seq Scan on plt1_adv_p2 t1_1
-                                       Filter: (b < 10)
-         ->  Hash Right Join
-               Hash Cond: ((t3_2.a = t1_2.a) AND (t3_2.c = t1_2.c))
-               ->  Seq Scan on plt3_adv_p2 t3_2
-               ->  Hash
-                     ->  Hash Right Join
-                           Hash Cond: ((t2_1.a = t1_2.a) AND (t2_1.c = t1_2.c))
-                           ->  Seq Scan on plt2_adv_p1 t2_1
-                           ->  Hash
-                                 ->  Seq Scan on plt1_adv_p1 t1_2
-                                       Filter: (b < 10)
-(23 rows)
-
-SELECT t1.a, t1.c, t2.a, t2.c, t3.a, t3.c FROM plt1_adv t1 LEFT JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) LEFT JOIN plt3_adv t3 ON (t1.a = t3.a AND t1.c = t3.c) WHERE t1.b < 10 ORDER BY t1.a;
- a |  c   | a |  c   | a |  c   
----+------+---+------+---+------
- 1 | 0001 |   |      |   | 
- 3 | 0003 | 3 | 0003 |   | 
- 4 | 0004 | 4 | 0004 | 4 | 0004
- 6 | 0006 | 6 | 0006 | 6 | 0006
-(4 rows)
-
--- Test cases where one side has the default partition while the other side
--- has the NULL partition
-DROP TABLE plt2_adv_p1;
--- Add the NULL partition to plt2_adv
-CREATE TABLE plt2_adv_p1_null PARTITION OF plt2_adv FOR VALUES IN (NULL, '0001', '0003');
-INSERT INTO plt2_adv SELECT i, i, to_char(i % 10, 'FM0000') FROM generate_series(1, 299) i WHERE i % 10 IN (1, 3);
-INSERT INTO plt2_adv VALUES (-1, -1, NULL);
-ANALYZE plt2_adv;
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 INNER JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE t1.b < 10 ORDER BY t1.a;
-                             QUERY PLAN                             
---------------------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Hash Join
-               Hash Cond: ((t2_1.a = t1_2.a) AND (t2_1.c = t1_2.c))
-               ->  Seq Scan on plt2_adv_p1_null t2_1
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p1 t1_2
-                           Filter: (b < 10)
-         ->  Hash Join
-               Hash Cond: ((t2_2.a = t1_1.a) AND (t2_2.c = t1_1.c))
-               ->  Seq Scan on plt2_adv_p2 t2_2
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p2 t1_1
-                           Filter: (b < 10)
-(15 rows)
-
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 INNER JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE t1.b < 10 ORDER BY t1.a;
- a |  c   | a |  c   
----+------+---+------
- 1 | 0001 | 1 | 0001
- 3 | 0003 | 3 | 0003
- 4 | 0004 | 4 | 0004
- 6 | 0006 | 6 | 0006
-(4 rows)
-
-DROP TABLE plt2_adv_p1_null;
--- Add the NULL partition that contains only NULL values as the key values
-CREATE TABLE plt2_adv_p1_null PARTITION OF plt2_adv FOR VALUES IN (NULL);
-INSERT INTO plt2_adv VALUES (-1, -1, NULL);
-ANALYZE plt2_adv;
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 INNER JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE t1.b < 10 ORDER BY t1.a;
-                      QUERY PLAN                      
-------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Hash Join
-         Hash Cond: ((t2.a = t1.a) AND (t2.c = t1.c))
-         ->  Seq Scan on plt2_adv_p2 t2
-         ->  Hash
-               ->  Seq Scan on plt1_adv_p2 t1
-                     Filter: (b < 10)
-(8 rows)
-
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 INNER JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE t1.b < 10 ORDER BY t1.a;
- a |  c   | a |  c   
----+------+---+------
- 4 | 0004 | 4 | 0004
- 6 | 0006 | 6 | 0006
-(2 rows)
-
-DROP TABLE plt1_adv;
-DROP TABLE plt2_adv;
-DROP TABLE plt3_adv;
--- Test interaction of partitioned join with partition pruning
-CREATE TABLE plt1_adv (a int, b int, c text) PARTITION BY LIST (c);
-CREATE TABLE plt1_adv_p1 PARTITION OF plt1_adv FOR VALUES IN ('0001');
-CREATE TABLE plt1_adv_p2 PARTITION OF plt1_adv FOR VALUES IN ('0002');
-CREATE TABLE plt1_adv_p3 PARTITION OF plt1_adv FOR VALUES IN ('0003');
-CREATE TABLE plt1_adv_p4 PARTITION OF plt1_adv FOR VALUES IN (NULL, '0004', '0005');
-INSERT INTO plt1_adv SELECT i, i, to_char(i % 10, 'FM0000') FROM generate_series(1, 299) i WHERE i % 10 IN (1, 2, 3, 4, 5);
-INSERT INTO plt1_adv VALUES (-1, -1, NULL);
-ANALYZE plt1_adv;
-CREATE TABLE plt2_adv (a int, b int, c text) PARTITION BY LIST (c);
-CREATE TABLE plt2_adv_p1 PARTITION OF plt2_adv FOR VALUES IN ('0001', '0002');
-CREATE TABLE plt2_adv_p2 PARTITION OF plt2_adv FOR VALUES IN (NULL);
-CREATE TABLE plt2_adv_p3 PARTITION OF plt2_adv FOR VALUES IN ('0003');
-CREATE TABLE plt2_adv_p4 PARTITION OF plt2_adv FOR VALUES IN ('0004', '0005');
-INSERT INTO plt2_adv SELECT i, i, to_char(i % 10, 'FM0000') FROM generate_series(1, 299) i WHERE i % 10 IN (1, 2, 3, 4, 5);
-INSERT INTO plt2_adv VALUES (-1, -1, NULL);
-ANALYZE plt2_adv;
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 INNER JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE t1.c IN ('0003', '0004', '0005') AND t1.b < 10 ORDER BY t1.a;
-                                       QUERY PLAN                                        
------------------------------------------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Hash Join
-               Hash Cond: ((t2_1.a = t1_1.a) AND (t2_1.c = t1_1.c))
-               ->  Seq Scan on plt2_adv_p3 t2_1
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p3 t1_1
-                           Filter: ((b < 10) AND (c = ANY ('{0003,0004,0005}'::text[])))
-         ->  Hash Join
-               Hash Cond: ((t2_2.a = t1_2.a) AND (t2_2.c = t1_2.c))
-               ->  Seq Scan on plt2_adv_p4 t2_2
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p4 t1_2
-                           Filter: ((b < 10) AND (c = ANY ('{0003,0004,0005}'::text[])))
-(15 rows)
-
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 INNER JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE t1.c IN ('0003', '0004', '0005') AND t1.b < 10 ORDER BY t1.a;
- a |  c   | a |  c   
----+------+---+------
- 3 | 0003 | 3 | 0003
- 4 | 0004 | 4 | 0004
- 5 | 0005 | 5 | 0005
-(3 rows)
-
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 LEFT JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE t1.c IS NULL AND t1.b < 10 ORDER BY t1.a;
-                       QUERY PLAN                       
---------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Hash Right Join
-         Hash Cond: ((t2.a = t1.a) AND (t2.c = t1.c))
-         ->  Seq Scan on plt2_adv_p4 t2
-         ->  Hash
-               ->  Seq Scan on plt1_adv_p4 t1
-                     Filter: ((c IS NULL) AND (b < 10))
-(8 rows)
-
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 LEFT JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE t1.c IS NULL AND t1.b < 10 ORDER BY t1.a;
- a  | c | a | c 
-----+---+---+---
- -1 |   |   | 
-(1 row)
-
-CREATE TABLE plt1_adv_default PARTITION OF plt1_adv DEFAULT;
-ANALYZE plt1_adv;
-CREATE TABLE plt2_adv_default PARTITION OF plt2_adv DEFAULT;
-ANALYZE plt2_adv;
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 INNER JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE t1.c IN ('0003', '0004', '0005') AND t1.b < 10 ORDER BY t1.a;
-                                       QUERY PLAN                                        
------------------------------------------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Append
-         ->  Hash Join
-               Hash Cond: ((t2_1.a = t1_1.a) AND (t2_1.c = t1_1.c))
-               ->  Seq Scan on plt2_adv_p3 t2_1
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p3 t1_1
-                           Filter: ((b < 10) AND (c = ANY ('{0003,0004,0005}'::text[])))
-         ->  Hash Join
-               Hash Cond: ((t2_2.a = t1_2.a) AND (t2_2.c = t1_2.c))
-               ->  Seq Scan on plt2_adv_p4 t2_2
-               ->  Hash
-                     ->  Seq Scan on plt1_adv_p4 t1_2
-                           Filter: ((b < 10) AND (c = ANY ('{0003,0004,0005}'::text[])))
-(15 rows)
-
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 INNER JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE t1.c IN ('0003', '0004', '0005') AND t1.b < 10 ORDER BY t1.a;
- a |  c   | a |  c   
----+------+---+------
- 3 | 0003 | 3 | 0003
- 4 | 0004 | 4 | 0004
- 5 | 0005 | 5 | 0005
-(3 rows)
-
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 LEFT JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE t1.c IS NULL AND t1.b < 10 ORDER BY t1.a;
-                       QUERY PLAN                       
---------------------------------------------------------
- Sort
-   Sort Key: t1.a
-   ->  Hash Right Join
-         Hash Cond: ((t2.a = t1.a) AND (t2.c = t1.c))
-         ->  Seq Scan on plt2_adv_p4 t2
-         ->  Hash
-               ->  Seq Scan on plt1_adv_p4 t1
-                     Filter: ((c IS NULL) AND (b < 10))
-(8 rows)
-
-SELECT t1.a, t1.c, t2.a, t2.c FROM plt1_adv t1 LEFT JOIN plt2_adv t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE t1.c IS NULL AND t1.b < 10 ORDER BY t1.a;
- a  | c | a | c 
-----+---+---+---
- -1 |   |   | 
-(1 row)
-
-DROP TABLE plt1_adv;
-DROP TABLE plt2_adv;
--- Test the process_outer_partition() code path
-CREATE TABLE plt1_adv (a int, b int, c text) PARTITION BY LIST (c);
-CREATE TABLE plt1_adv_p1 PARTITION OF plt1_adv FOR VALUES IN ('0000', '0001', '0002');
-CREATE TABLE plt1_adv_p2 PARTITION OF plt1_adv FOR VALUES IN ('0003', '0004');
-INSERT INTO plt1_adv SELECT i, i, to_char(i % 5, 'FM0000') FROM generate_series(0, 24) i;
-ANALYZE plt1_adv;
-CREATE TABLE plt2_adv (a int, b int, c text) PARTITION BY LIST (c);
-CREATE TABLE plt2_adv_p1 PARTITION OF plt2_adv FOR VALUES IN ('0002');
-CREATE TABLE plt2_adv_p2 PARTITION OF plt2_adv FOR VALUES IN ('0003', '0004');
-INSERT INTO plt2_adv SELECT i, i, to_char(i % 5, 'FM0000') FROM generate_series(0, 24) i WHERE i % 5 IN (2, 3, 4);
-ANALYZE plt2_adv;
-CREATE TABLE plt3_adv (a int, b int, c text) PARTITION BY LIST (c);
-CREATE TABLE plt3_adv_p1 PARTITION OF plt3_adv FOR VALUES IN ('0001');
-CREATE TABLE plt3_adv_p2 PARTITION OF plt3_adv FOR VALUES IN ('0003', '0004');
-INSERT INTO plt3_adv SELECT i, i, to_char(i % 5, 'FM0000') FROM generate_series(0, 24) i WHERE i % 5 IN (1, 3, 4);
-ANALYZE plt3_adv;
--- This tests that when merging partitions from plt1_adv and plt2_adv in
--- merge_list_bounds(), process_outer_partition() returns an already-assigned
--- merged partition when re-called with plt1_adv_p1 for the second list value
--- '0001' of that partition
-EXPLAIN (COSTS OFF)
-SELECT t1.a, t1.c, t2.a, t2.c, t3.a, t3.c FROM (plt1_adv t1 LEFT JOIN plt2_adv t2 ON (t1.c = t2.c)) FULL JOIN plt3_adv t3 ON (t1.c = t3.c) WHERE coalesce(t1.a, 0) % 5 != 3 AND coalesce(t1.a, 0) % 5 != 4 ORDER BY t1.c, t1.a, t2.a, t3.a;
-                                          QUERY PLAN                                           
------------------------------------------------------------------------------------------------
- Sort
-   Sort Key: t1.c, t1.a, t2.a, t3.a
-   ->  Append
-         ->  Hash Full Join
-               Hash Cond: (t1_1.c = t3_1.c)
-               Filter: (((COALESCE(t1_1.a, 0) % 5) <> 3) AND ((COALESCE(t1_1.a, 0) % 5) <> 4))
-               ->  Hash Left Join
-                     Hash Cond: (t1_1.c = t2_1.c)
-                     ->  Seq Scan on plt1_adv_p1 t1_1
-                     ->  Hash
-                           ->  Seq Scan on plt2_adv_p1 t2_1
-               ->  Hash
-                     ->  Seq Scan on plt3_adv_p1 t3_1
-         ->  Hash Full Join
-               Hash Cond: (t1_2.c = t3_2.c)
-               Filter: (((COALESCE(t1_2.a, 0) % 5) <> 3) AND ((COALESCE(t1_2.a, 0) % 5) <> 4))
-               ->  Hash Left Join
-                     Hash Cond: (t1_2.c = t2_2.c)
-                     ->  Seq Scan on plt1_adv_p2 t1_2
-                     ->  Hash
-                           ->  Seq Scan on plt2_adv_p2 t2_2
-               ->  Hash
-                     ->  Seq Scan on plt3_adv_p2 t3_2
-(23 rows)
-
-SELECT t1.a, t1.c, t2.a, t2.c, t3.a, t3.c FROM (plt1_adv t1 LEFT JOIN plt2_adv t2 ON (t1.c = t2.c)) FULL JOIN plt3_adv t3 ON (t1.c = t3.c) WHERE coalesce(t1.a, 0) % 5 != 3 AND coalesce(t1.a, 0) % 5 != 4 ORDER BY t1.c, t1.a, t2.a, t3.a;
- a  |  c   | a  |  c   | a  |  c   
-----+------+----+------+----+------
-  0 | 0000 |    |      |    | 
-  5 | 0000 |    |      |    | 
- 10 | 0000 |    |      |    | 
- 15 | 0000 |    |      |    | 
- 20 | 0000 |    |      |    | 
-  1 | 0001 |    |      |  1 | 0001
-  1 | 0001 |    |      |  6 | 0001
-  1 | 0001 |    |      | 11 | 0001
-  1 | 0001 |    |      | 16 | 0001
-  1 | 0001 |    |      | 21 | 0001
-  6 | 0001 |    |      |  1 | 0001
-  6 | 0001 |    |      |  6 | 0001
-  6 | 0001 |    |      | 11 | 0001
-  6 | 0001 |    |      | 16 | 0001
-  6 | 0001 |    |      | 21 | 0001
- 11 | 0001 |    |      |  1 | 0001
- 11 | 0001 |    |      |  6 | 0001
- 11 | 0001 |    |      | 11 | 0001
- 11 | 0001 |    |      | 16 | 0001
- 11 | 0001 |    |      | 21 | 0001
- 16 | 0001 |    |      |  1 | 0001
- 16 | 0001 |    |      |  6 | 0001
- 16 | 0001 |    |      | 11 | 0001
- 16 | 0001 |    |      | 16 | 0001
- 16 | 0001 |    |      | 21 | 0001
- 21 | 0001 |    |      |  1 | 0001
- 21 | 0001 |    |      |  6 | 0001
- 21 | 0001 |    |      | 11 | 0001
- 21 | 0001 |    |      | 16 | 0001
- 21 | 0001 |    |      | 21 | 0001
-  2 | 0002 |  2 | 0002 |    | 
-  2 | 0002 |  7 | 0002 |    | 
-  2 | 0002 | 12 | 0002 |    | 
-  2 | 0002 | 17 | 0002 |    | 
-  2 | 0002 | 22 | 0002 |    | 
-  7 | 0002 |  2 | 0002 |    | 
-  7 | 0002 |  7 | 0002 |    | 
-  7 | 0002 | 12 | 0002 |    | 
-  7 | 0002 | 17 | 0002 |    | 
-  7 | 0002 | 22 | 0002 |    | 
- 12 | 0002 |  2 | 0002 |    | 
- 12 | 0002 |  7 | 0002 |    | 
- 12 | 0002 | 12 | 0002 |    | 
- 12 | 0002 | 17 | 0002 |    | 
- 12 | 0002 | 22 | 0002 |    | 
- 17 | 0002 |  2 | 0002 |    | 
- 17 | 0002 |  7 | 0002 |    | 
- 17 | 0002 | 12 | 0002 |    | 
- 17 | 0002 | 17 | 0002 |    | 
- 17 | 0002 | 22 | 0002 |    | 
- 22 | 0002 |  2 | 0002 |    | 
- 22 | 0002 |  7 | 0002 |    | 
- 22 | 0002 | 12 | 0002 |    | 
- 22 | 0002 | 17 | 0002 |    | 
- 22 | 0002 | 22 | 0002 |    | 
-(55 rows)
-
-DROP TABLE plt1_adv;
-DROP TABLE plt2_adv;
-DROP TABLE plt3_adv;
--- Tests for multi-level partitioned tables
-CREATE TABLE alpha (a double precision, b int, c text) PARTITION BY RANGE (a);
-CREATE TABLE alpha_neg PARTITION OF alpha FOR VALUES FROM ('-Infinity') TO (0) PARTITION BY RANGE (b);
-CREATE TABLE alpha_pos PARTITION OF alpha FOR VALUES FROM (0) TO (10.0) PARTITION BY LIST (c);
-CREATE TABLE alpha_neg_p1 PARTITION OF alpha_neg FOR VALUES FROM (100) TO (200);
-CREATE TABLE alpha_neg_p2 PARTITION OF alpha_neg FOR VALUES FROM (200) TO (300);
-CREATE TABLE alpha_neg_p3 PARTITION OF alpha_neg FOR VALUES FROM (300) TO (400);
-CREATE TABLE alpha_pos_p1 PARTITION OF alpha_pos FOR VALUES IN ('0001', '0003');
-CREATE TABLE alpha_pos_p2 PARTITION OF alpha_pos FOR VALUES IN ('0004', '0006');
-CREATE TABLE alpha_pos_p3 PARTITION OF alpha_pos FOR VALUES IN ('0008', '0009');
-INSERT INTO alpha_neg SELECT -1.0, i, to_char(i % 10, 'FM0000') FROM generate_series(100, 399) i WHERE i % 10 IN (1, 3, 4, 6, 8, 9);
-INSERT INTO alpha_pos SELECT  1.0, i, to_char(i % 10, 'FM0000') FROM generate_series(100, 399) i WHERE i % 10 IN (1, 3, 4, 6, 8, 9);
-ANALYZE alpha;
-CREATE TABLE beta (a double precision, b int, c text) PARTITION BY RANGE (a);
-CREATE TABLE beta_neg PARTITION OF beta FOR VALUES FROM (-10.0) TO (0) PARTITION BY RANGE (b);
-CREATE TABLE beta_pos PARTITION OF beta FOR VALUES FROM (0) TO ('Infinity') PARTITION BY LIST (c);
-CREATE TABLE beta_neg_p1 PARTITION OF beta_neg FOR VALUES FROM (100) TO (150);
-CREATE TABLE beta_neg_p2 PARTITION OF beta_neg FOR VALUES FROM (200) TO (300);
-CREATE TABLE beta_neg_p3 PARTITION OF beta_neg FOR VALUES FROM (350) TO (500);
-CREATE TABLE beta_pos_p1 PARTITION OF beta_pos FOR VALUES IN ('0002', '0003');
-CREATE TABLE beta_pos_p2 PARTITION OF beta_pos FOR VALUES IN ('0004', '0006');
-CREATE TABLE beta_pos_p3 PARTITION OF beta_pos FOR VALUES IN ('0007', '0009');
-INSERT INTO beta_neg SELECT -1.0, i, to_char(i % 10, 'FM0000') FROM generate_series(100, 149) i WHERE i % 10 IN (2, 3, 4, 6, 7, 9);
-INSERT INTO beta_neg SELECT -1.0, i, to_char(i % 10, 'FM0000') FROM generate_series(200, 299) i WHERE i % 10 IN (2, 3, 4, 6, 7, 9);
-INSERT INTO beta_neg SELECT -1.0, i, to_char(i % 10, 'FM0000') FROM generate_series(350, 499) i WHERE i % 10 IN (2, 3, 4, 6, 7, 9);
-INSERT INTO beta_pos SELECT  1.0, i, to_char(i % 10, 'FM0000') FROM generate_series(100, 149) i WHERE i % 10 IN (2, 3, 4, 6, 7, 9);
-INSERT INTO beta_pos SELECT  1.0, i, to_char(i % 10, 'FM0000') FROM generate_series(200, 299) i WHERE i % 10 IN (2, 3, 4, 6, 7, 9);
-INSERT INTO beta_pos SELECT  1.0, i, to_char(i % 10, 'FM0000') FROM generate_series(350, 499) i WHERE i % 10 IN (2, 3, 4, 6, 7, 9);
-ANALYZE beta;
-EXPLAIN (COSTS OFF)
-SELECT t1.*, t2.* FROM alpha t1 INNER JOIN beta t2 ON (t1.a = t2.a AND t1.b = t2.b) WHERE t1.b >= 125 AND t1.b < 225 ORDER BY t1.a, t1.b;
-                             QUERY PLAN                             
---------------------------------------------------------------------
- Sort
-   Sort Key: t1.a, t1.b
-   ->  Append
-         ->  Hash Join
-               Hash Cond: ((t1_1.a = t2_1.a) AND (t1_1.b = t2_1.b))
-               ->  Seq Scan on alpha_neg_p1 t1_1
-                     Filter: ((b >= 125) AND (b < 225))
-               ->  Hash
-                     ->  Seq Scan on beta_neg_p1 t2_1
-         ->  Hash Join
-               Hash Cond: ((t2_2.a = t1_2.a) AND (t2_2.b = t1_2.b))
-               ->  Seq Scan on beta_neg_p2 t2_2
-               ->  Hash
-                     ->  Seq Scan on alpha_neg_p2 t1_2
-                           Filter: ((b >= 125) AND (b < 225))
-         ->  Hash Join
-               Hash Cond: ((t2_4.a = t1_4.a) AND (t2_4.b = t1_4.b))
-               ->  Append
-                     ->  Seq Scan on beta_pos_p1 t2_4
-                     ->  Seq Scan on beta_pos_p2 t2_5
-                     ->  Seq Scan on beta_pos_p3 t2_6
-               ->  Hash
-                     ->  Append
-                           ->  Seq Scan on alpha_pos_p1 t1_4
-                                 Filter: ((b >= 125) AND (b < 225))
-                           ->  Seq Scan on alpha_pos_p2 t1_5
-                                 Filter: ((b >= 125) AND (b < 225))
-                           ->  Seq Scan on alpha_pos_p3 t1_6
-                                 Filter: ((b >= 125) AND (b < 225))
-(29 rows)
-
-SELECT t1.*, t2.* FROM alpha t1 INNER JOIN beta t2 ON (t1.a = t2.a AND t1.b = t2.b) WHERE t1.b >= 125 AND t1.b < 225 ORDER BY t1.a, t1.b;
- a  |  b  |  c   | a  |  b  |  c   
-----+-----+------+----+-----+------
- -1 | 126 | 0006 | -1 | 126 | 0006
- -1 | 129 | 0009 | -1 | 129 | 0009
- -1 | 133 | 0003 | -1 | 133 | 0003
- -1 | 134 | 0004 | -1 | 134 | 0004
- -1 | 136 | 0006 | -1 | 136 | 0006
- -1 | 139 | 0009 | -1 | 139 | 0009
- -1 | 143 | 0003 | -1 | 143 | 0003
- -1 | 144 | 0004 | -1 | 144 | 0004
- -1 | 146 | 0006 | -1 | 146 | 0006
- -1 | 149 | 0009 | -1 | 149 | 0009
- -1 | 203 | 0003 | -1 | 203 | 0003
- -1 | 204 | 0004 | -1 | 204 | 0004
- -1 | 206 | 0006 | -1 | 206 | 0006
- -1 | 209 | 0009 | -1 | 209 | 0009
- -1 | 213 | 0003 | -1 | 213 | 0003
- -1 | 214 | 0004 | -1 | 214 | 0004
- -1 | 216 | 0006 | -1 | 216 | 0006
- -1 | 219 | 0009 | -1 | 219 | 0009
- -1 | 223 | 0003 | -1 | 223 | 0003
- -1 | 224 | 0004 | -1 | 224 | 0004
-  1 | 126 | 0006 |  1 | 126 | 0006
-  1 | 129 | 0009 |  1 | 129 | 0009
-  1 | 133 | 0003 |  1 | 133 | 0003
-  1 | 134 | 0004 |  1 | 134 | 0004
-  1 | 136 | 0006 |  1 | 136 | 0006
-  1 | 139 | 0009 |  1 | 139 | 0009
-  1 | 143 | 0003 |  1 | 143 | 0003
-  1 | 144 | 0004 |  1 | 144 | 0004
-  1 | 146 | 0006 |  1 | 146 | 0006
-  1 | 149 | 0009 |  1 | 149 | 0009
-  1 | 203 | 0003 |  1 | 203 | 0003
-  1 | 204 | 0004 |  1 | 204 | 0004
-  1 | 206 | 0006 |  1 | 206 | 0006
-  1 | 209 | 0009 |  1 | 209 | 0009
-  1 | 213 | 0003 |  1 | 213 | 0003
-  1 | 214 | 0004 |  1 | 214 | 0004
-  1 | 216 | 0006 |  1 | 216 | 0006
-  1 | 219 | 0009 |  1 | 219 | 0009
-  1 | 223 | 0003 |  1 | 223 | 0003
-  1 | 224 | 0004 |  1 | 224 | 0004
-(40 rows)
-
-EXPLAIN (COSTS OFF)
-SELECT t1.*, t2.* FROM alpha t1 INNER JOIN beta t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE ((t1.b >= 100 AND t1.b < 110) OR (t1.b >= 200 AND t1.b < 210)) AND ((t2.b >= 100 AND t2.b < 110) OR (t2.b >= 200 AND t2.b < 210)) AND t1.c IN ('0004', '0009') ORDER BY t1.a, t1.b, t2.b;
-                                                              QUERY PLAN                                                              
---------------------------------------------------------------------------------------------------------------------------------------
- Sort
-   Sort Key: t1.a, t1.b, t2.b
-   ->  Append
-         ->  Hash Join
-               Hash Cond: ((t1_2.a = t2_2.a) AND (t1_2.c = t2_2.c))
-               ->  Append
-                     ->  Seq Scan on alpha_neg_p1 t1_2
-                           Filter: ((c = ANY ('{0004,0009}'::text[])) AND (((b >= 100) AND (b < 110)) OR ((b >= 200) AND (b < 210))))
-                     ->  Seq Scan on alpha_neg_p2 t1_3
-                           Filter: ((c = ANY ('{0004,0009}'::text[])) AND (((b >= 100) AND (b < 110)) OR ((b >= 200) AND (b < 210))))
-               ->  Hash
-                     ->  Append
-                           ->  Seq Scan on beta_neg_p1 t2_2
-                                 Filter: (((b >= 100) AND (b < 110)) OR ((b >= 200) AND (b < 210)))
-                           ->  Seq Scan on beta_neg_p2 t2_3
-                                 Filter: (((b >= 100) AND (b < 110)) OR ((b >= 200) AND (b < 210)))
-         ->  Nested Loop
-               Join Filter: ((t1_4.a = t2_4.a) AND (t1_4.c = t2_4.c))
-               ->  Seq Scan on alpha_pos_p2 t1_4
-                     Filter: ((c = ANY ('{0004,0009}'::text[])) AND (((b >= 100) AND (b < 110)) OR ((b >= 200) AND (b < 210))))
-               ->  Seq Scan on beta_pos_p2 t2_4
-                     Filter: (((b >= 100) AND (b < 110)) OR ((b >= 200) AND (b < 210)))
-         ->  Nested Loop
-               Join Filter: ((t1_5.a = t2_5.a) AND (t1_5.c = t2_5.c))
-               ->  Seq Scan on alpha_pos_p3 t1_5
-                     Filter: ((c = ANY ('{0004,0009}'::text[])) AND (((b >= 100) AND (b < 110)) OR ((b >= 200) AND (b < 210))))
-               ->  Seq Scan on beta_pos_p3 t2_5
-                     Filter: (((b >= 100) AND (b < 110)) OR ((b >= 200) AND (b < 210)))
-(28 rows)
-
-SELECT t1.*, t2.* FROM alpha t1 INNER JOIN beta t2 ON (t1.a = t2.a AND t1.c = t2.c) WHERE ((t1.b >= 100 AND t1.b < 110) OR (t1.b >= 200 AND t1.b < 210)) AND ((t2.b >= 100 AND t2.b < 110) OR (t2.b >= 200 AND t2.b < 210)) AND t1.c IN ('0004', '0009') ORDER BY t1.a, t1.b, t2.b;
- a  |  b  |  c   | a  |  b  |  c   
-----+-----+------+----+-----+------
- -1 | 104 | 0004 | -1 | 104 | 0004
- -1 | 104 | 0004 | -1 | 204 | 0004
- -1 | 109 | 0009 | -1 | 109 | 0009
- -1 | 109 | 0009 | -1 | 209 | 0009
- -1 | 204 | 0004 | -1 | 104 | 0004
- -1 | 204 | 0004 | -1 | 204 | 0004
- -1 | 209 | 0009 | -1 | 109 | 0009
- -1 | 209 | 0009 | -1 | 209 | 0009
-  1 | 104 | 0004 |  1 | 104 | 0004
-  1 | 104 | 0004 |  1 | 204 | 0004
-  1 | 109 | 0009 |  1 | 109 | 0009
-  1 | 109 | 0009 |  1 | 209 | 0009
-  1 | 204 | 0004 |  1 | 104 | 0004
-  1 | 204 | 0004 |  1 | 204 | 0004
-  1 | 209 | 0009 |  1 | 109 | 0009
-  1 | 209 | 0009 |  1 | 209 | 0009
-(16 rows)
-
-EXPLAIN (COSTS OFF)
-SELECT t1.*, t2.* FROM alpha t1 INNER JOIN beta t2 ON (t1.a = t2.a AND t1.b = t2.b AND t1.c = t2.c) WHERE ((t1.b >= 100 AND t1.b < 110) OR (t1.b >= 200 AND t1.b < 210)) AND ((t2.b >= 100 AND t2.b < 110) OR (t2.b >= 200 AND t2.b < 210)) AND t1.c IN ('0004', '0009') ORDER BY t1.a, t1.b;
-                                                           QUERY PLAN                                                           
---------------------------------------------------------------------------------------------------------------------------------
- Sort
-   Sort Key: t1.a, t1.b
-   ->  Append
-         ->  Hash Join
-               Hash Cond: ((t1_1.a = t2_1.a) AND (t1_1.b = t2_1.b) AND (t1_1.c = t2_1.c))
-               ->  Seq Scan on alpha_neg_p1 t1_1
-                     Filter: ((c = ANY ('{0004,0009}'::text[])) AND (((b >= 100) AND (b < 110)) OR ((b >= 200) AND (b < 210))))
-               ->  Hash
-                     ->  Seq Scan on beta_neg_p1 t2_1
-                           Filter: (((b >= 100) AND (b < 110)) OR ((b >= 200) AND (b < 210)))
-         ->  Hash Join
-               Hash Cond: ((t1_2.a = t2_2.a) AND (t1_2.b = t2_2.b) AND (t1_2.c = t2_2.c))
-               ->  Seq Scan on alpha_neg_p2 t1_2
-                     Filter: ((c = ANY ('{0004,0009}'::text[])) AND (((b >= 100) AND (b < 110)) OR ((b >= 200) AND (b < 210))))
-               ->  Hash
-                     ->  Seq Scan on beta_neg_p2 t2_2
-                           Filter: (((b >= 100) AND (b < 110)) OR ((b >= 200) AND (b < 210)))
-         ->  Nested Loop
-               Join Filter: ((t1_3.a = t2_3.a) AND (t1_3.b = t2_3.b) AND (t1_3.c = t2_3.c))
-               ->  Seq Scan on alpha_pos_p2 t1_3
-                     Filter: ((c = ANY ('{0004,0009}'::text[])) AND (((b >= 100) AND (b < 110)) OR ((b >= 200) AND (b < 210))))
-               ->  Seq Scan on beta_pos_p2 t2_3
-                     Filter: (((b >= 100) AND (b < 110)) OR ((b >= 200) AND (b < 210)))
-         ->  Nested Loop
-               Join Filter: ((t1_4.a = t2_4.a) AND (t1_4.b = t2_4.b) AND (t1_4.c = t2_4.c))
-               ->  Seq Scan on alpha_pos_p3 t1_4
-                     Filter: ((c = ANY ('{0004,0009}'::text[])) AND (((b >= 100) AND (b < 110)) OR ((b >= 200) AND (b < 210))))
-               ->  Seq Scan on beta_pos_p3 t2_4
-                     Filter: (((b >= 100) AND (b < 110)) OR ((b >= 200) AND (b < 210)))
-(29 rows)
-
-SELECT t1.*, t2.* FROM alpha t1 INNER JOIN beta t2 ON (t1.a = t2.a AND t1.b = t2.b AND t1.c = t2.c) WHERE ((t1.b >= 100 AND t1.b < 110) OR (t1.b >= 200 AND t1.b < 210)) AND ((t2.b >= 100 AND t2.b < 110) OR (t2.b >= 200 AND t2.b < 210)) AND t1.c IN ('0004', '0009') ORDER BY t1.a, t1.b;
- a  |  b  |  c   | a  |  b  |  c   
-----+-----+------+----+-----+------
- -1 | 104 | 0004 | -1 | 104 | 0004
- -1 | 109 | 0009 | -1 | 109 | 0009
- -1 | 204 | 0004 | -1 | 204 | 0004
- -1 | 209 | 0009 | -1 | 209 | 0009
-  1 | 104 | 0004 |  1 | 104 | 0004
-  1 | 109 | 0009 |  1 | 109 | 0009
-  1 | 204 | 0004 |  1 | 204 | 0004
-  1 | 209 | 0009 |  1 | 209 | 0009
-(8 rows)
-
--- partitionwise join with fractional paths
-CREATE TABLE fract_t (id BIGINT, PRIMARY KEY (id)) PARTITION BY RANGE (id);
-CREATE TABLE fract_t0 PARTITION OF fract_t FOR VALUES FROM ('0') TO ('1000');
-CREATE TABLE fract_t1 PARTITION OF fract_t FOR VALUES FROM ('1000') TO ('2000');
--- insert data
-INSERT INTO fract_t (id) (SELECT generate_series(0, 1999));
-ANALYZE fract_t;
--- verify plan; nested index only scans
-SET max_parallel_workers_per_gather = 0;
-SET enable_partitionwise_join = on;
-EXPLAIN (COSTS OFF)
-SELECT x.id, y.id FROM fract_t x LEFT JOIN fract_t y USING (id) ORDER BY x.id ASC LIMIT 10;
-                              QUERY PLAN                               
------------------------------------------------------------------------
- Limit
-   ->  Merge Append
-         Sort Key: x.id
-         ->  Merge Left Join
-               Merge Cond: (x_1.id = y_1.id)
-               ->  Index Only Scan using fract_t0_pkey on fract_t0 x_1
-               ->  Index Only Scan using fract_t0_pkey on fract_t0 y_1
-         ->  Merge Left Join
-               Merge Cond: (x_2.id = y_2.id)
-               ->  Index Only Scan using fract_t1_pkey on fract_t1 x_2
-               ->  Index Only Scan using fract_t1_pkey on fract_t1 y_2
-(11 rows)
-
-EXPLAIN (COSTS OFF)
-SELECT x.id, y.id FROM fract_t x LEFT JOIN fract_t y USING (id) ORDER BY x.id DESC LIMIT 10;
-                                   QUERY PLAN                                   
---------------------------------------------------------------------------------
- Limit
-   ->  Merge Append
-         Sort Key: x.id DESC
-         ->  Nested Loop Left Join
-               ->  Index Only Scan Backward using fract_t0_pkey on fract_t0 x_1
-               ->  Index Only Scan using fract_t0_pkey on fract_t0 y_1
-                     Index Cond: (id = x_1.id)
-         ->  Nested Loop Left Join
-               ->  Index Only Scan Backward using fract_t1_pkey on fract_t1 x_2
-               ->  Index Only Scan using fract_t1_pkey on fract_t1 y_2
-                     Index Cond: (id = x_2.id)
-(11 rows)
-
--- cleanup
-DROP TABLE fract_t;
-RESET max_parallel_workers_per_gather;
-RESET enable_partitionwise_join;
+psql: error: connection to server on socket "/tmp/f_SDOOqtof/.s.PGSQL.16412" failed: No such file or directory
+	Is the server running locally and accepting connections on that socket?
diff -U3 /tmp/cirrus-ci-build/src/test/regress/expected/partition_prune.out /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/partition_prune.out
--- /tmp/cirrus-ci-build/src/test/regress/expected/partition_prune.out	2024-09-20 04:07:19.054812578 +0000
+++ /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/partition_prune.out	2024-09-20 04:17:09.125564756 +0000
@@ -1,4442 +1,2 @@
---
--- Test partitioning planner code
---
--- Helper function which can be used for masking out portions of EXPLAIN
--- ANALYZE which could contain information that's not consistent on all
--- platforms.
-create function explain_analyze(query text) returns setof text
-language plpgsql as
-$$
-declare
-    ln text;
-begin
-    for ln in
-        execute format('explain (analyze, costs off, summary off, timing off) %s',
-            query)
-    loop
-        ln := regexp_replace(ln, 'Maximum Storage: \d+', 'Maximum Storage: N');
-        return next ln;
-    end loop;
-end;
-$$;
--- Force generic plans to be used for all prepared statements in this file.
-set plan_cache_mode = force_generic_plan;
-create table lp (a char) partition by list (a);
-create table lp_default partition of lp default;
-create table lp_ef partition of lp for values in ('e', 'f');
-create table lp_ad partition of lp for values in ('a', 'd');
-create table lp_bc partition of lp for values in ('b', 'c');
-create table lp_g partition of lp for values in ('g');
-create table lp_null partition of lp for values in (null);
-explain (costs off) select * from lp;
-            QUERY PLAN             
------------------------------------
- Append
-   ->  Seq Scan on lp_ad lp_1
-   ->  Seq Scan on lp_bc lp_2
-   ->  Seq Scan on lp_ef lp_3
-   ->  Seq Scan on lp_g lp_4
-   ->  Seq Scan on lp_null lp_5
-   ->  Seq Scan on lp_default lp_6
-(7 rows)
-
-explain (costs off) select * from lp where a > 'a' and a < 'd';
-                        QUERY PLAN                         
------------------------------------------------------------
- Append
-   ->  Seq Scan on lp_bc lp_1
-         Filter: ((a > 'a'::bpchar) AND (a < 'd'::bpchar))
-   ->  Seq Scan on lp_default lp_2
-         Filter: ((a > 'a'::bpchar) AND (a < 'd'::bpchar))
-(5 rows)
-
-explain (costs off) select * from lp where a > 'a' and a <= 'd';
-                         QUERY PLAN                         
-------------------------------------------------------------
- Append
-   ->  Seq Scan on lp_ad lp_1
-         Filter: ((a > 'a'::bpchar) AND (a <= 'd'::bpchar))
-   ->  Seq Scan on lp_bc lp_2
-         Filter: ((a > 'a'::bpchar) AND (a <= 'd'::bpchar))
-   ->  Seq Scan on lp_default lp_3
-         Filter: ((a > 'a'::bpchar) AND (a <= 'd'::bpchar))
-(7 rows)
-
-explain (costs off) select * from lp where a = 'a';
-         QUERY PLAN          
------------------------------
- Seq Scan on lp_ad lp
-   Filter: (a = 'a'::bpchar)
-(2 rows)
-
-explain (costs off) select * from lp where 'a' = a;	/* commuted */
-         QUERY PLAN          
------------------------------
- Seq Scan on lp_ad lp
-   Filter: ('a'::bpchar = a)
-(2 rows)
-
-explain (costs off) select * from lp where a is not null;
-            QUERY PLAN             
------------------------------------
- Append
-   ->  Seq Scan on lp_ad lp_1
-         Filter: (a IS NOT NULL)
-   ->  Seq Scan on lp_bc lp_2
-         Filter: (a IS NOT NULL)
-   ->  Seq Scan on lp_ef lp_3
-         Filter: (a IS NOT NULL)
-   ->  Seq Scan on lp_g lp_4
-         Filter: (a IS NOT NULL)
-   ->  Seq Scan on lp_default lp_5
-         Filter: (a IS NOT NULL)
-(11 rows)
-
-explain (costs off) select * from lp where a is null;
-       QUERY PLAN       
-------------------------
- Seq Scan on lp_null lp
-   Filter: (a IS NULL)
-(2 rows)
-
-explain (costs off) select * from lp where a = 'a' or a = 'c';
-                        QUERY PLAN                        
-----------------------------------------------------------
- Append
-   ->  Seq Scan on lp_ad lp_1
-         Filter: ((a = 'a'::bpchar) OR (a = 'c'::bpchar))
-   ->  Seq Scan on lp_bc lp_2
-         Filter: ((a = 'a'::bpchar) OR (a = 'c'::bpchar))
-(5 rows)
-
-explain (costs off) select * from lp where a is not null and (a = 'a' or a = 'c');
-                                   QUERY PLAN                                   
---------------------------------------------------------------------------------
- Append
-   ->  Seq Scan on lp_ad lp_1
-         Filter: ((a IS NOT NULL) AND ((a = 'a'::bpchar) OR (a = 'c'::bpchar)))
-   ->  Seq Scan on lp_bc lp_2
-         Filter: ((a IS NOT NULL) AND ((a = 'a'::bpchar) OR (a = 'c'::bpchar)))
-(5 rows)
-
-explain (costs off) select * from lp where a <> 'g';
-             QUERY PLAN             
-------------------------------------
- Append
-   ->  Seq Scan on lp_ad lp_1
-         Filter: (a <> 'g'::bpchar)
-   ->  Seq Scan on lp_bc lp_2
-         Filter: (a <> 'g'::bpchar)
-   ->  Seq Scan on lp_ef lp_3
-         Filter: (a <> 'g'::bpchar)
-   ->  Seq Scan on lp_default lp_4
-         Filter: (a <> 'g'::bpchar)
-(9 rows)
-
-explain (costs off) select * from lp where a <> 'a' and a <> 'd';
-                         QUERY PLAN                          
--------------------------------------------------------------
- Append
-   ->  Seq Scan on lp_bc lp_1
-         Filter: ((a <> 'a'::bpchar) AND (a <> 'd'::bpchar))
-   ->  Seq Scan on lp_ef lp_2
-         Filter: ((a <> 'a'::bpchar) AND (a <> 'd'::bpchar))
-   ->  Seq Scan on lp_g lp_3
-         Filter: ((a <> 'a'::bpchar) AND (a <> 'd'::bpchar))
-   ->  Seq Scan on lp_default lp_4
-         Filter: ((a <> 'a'::bpchar) AND (a <> 'd'::bpchar))
-(9 rows)
-
-explain (costs off) select * from lp where a not in ('a', 'd');
-                   QUERY PLAN                   
-------------------------------------------------
- Append
-   ->  Seq Scan on lp_bc lp_1
-         Filter: (a <> ALL ('{a,d}'::bpchar[]))
-   ->  Seq Scan on lp_ef lp_2
-         Filter: (a <> ALL ('{a,d}'::bpchar[]))
-   ->  Seq Scan on lp_g lp_3
-         Filter: (a <> ALL ('{a,d}'::bpchar[]))
-   ->  Seq Scan on lp_default lp_4
-         Filter: (a <> ALL ('{a,d}'::bpchar[]))
-(9 rows)
-
--- collation matches the partitioning collation, pruning works
-create table coll_pruning (a text collate "C") partition by list (a);
-create table coll_pruning_a partition of coll_pruning for values in ('a');
-create table coll_pruning_b partition of coll_pruning for values in ('b');
-create table coll_pruning_def partition of coll_pruning default;
-explain (costs off) select * from coll_pruning where a collate "C" = 'a' collate "C";
-               QUERY PLAN                
------------------------------------------
- Seq Scan on coll_pruning_a coll_pruning
-   Filter: (a = 'a'::text COLLATE "C")
-(2 rows)
-
--- collation doesn't match the partitioning collation, no pruning occurs
-explain (costs off) select * from coll_pruning where a collate "POSIX" = 'a' collate "POSIX";
-                       QUERY PLAN                        
----------------------------------------------------------
- Append
-   ->  Seq Scan on coll_pruning_a coll_pruning_1
-         Filter: ((a)::text = 'a'::text COLLATE "POSIX")
-   ->  Seq Scan on coll_pruning_b coll_pruning_2
-         Filter: ((a)::text = 'a'::text COLLATE "POSIX")
-   ->  Seq Scan on coll_pruning_def coll_pruning_3
-         Filter: ((a)::text = 'a'::text COLLATE "POSIX")
-(7 rows)
-
-create table rlp (a int, b varchar) partition by range (a);
-create table rlp_default partition of rlp default partition by list (a);
-create table rlp_default_default partition of rlp_default default;
-create table rlp_default_10 partition of rlp_default for values in (10);
-create table rlp_default_30 partition of rlp_default for values in (30);
-create table rlp_default_null partition of rlp_default for values in (null);
-create table rlp1 partition of rlp for values from (minvalue) to (1);
-create table rlp2 partition of rlp for values from (1) to (10);
-create table rlp3 (b varchar, a int) partition by list (b varchar_ops);
-create table rlp3_default partition of rlp3 default;
-create table rlp3abcd partition of rlp3 for values in ('ab', 'cd');
-create table rlp3efgh partition of rlp3 for values in ('ef', 'gh');
-create table rlp3nullxy partition of rlp3 for values in (null, 'xy');
-alter table rlp attach partition rlp3 for values from (15) to (20);
-create table rlp4 partition of rlp for values from (20) to (30) partition by range (a);
-create table rlp4_default partition of rlp4 default;
-create table rlp4_1 partition of rlp4 for values from (20) to (25);
-create table rlp4_2 partition of rlp4 for values from (25) to (29);
-create table rlp5 partition of rlp for values from (31) to (maxvalue) partition by range (a);
-create table rlp5_default partition of rlp5 default;
-create table rlp5_1 partition of rlp5 for values from (31) to (40);
-explain (costs off) select * from rlp where a < 1;
-      QUERY PLAN      
-----------------------
- Seq Scan on rlp1 rlp
-   Filter: (a < 1)
-(2 rows)
-
-explain (costs off) select * from rlp where 1 > a;	/* commuted */
-      QUERY PLAN      
-----------------------
- Seq Scan on rlp1 rlp
-   Filter: (1 > a)
-(2 rows)
-
-explain (costs off) select * from rlp where a <= 1;
-          QUERY PLAN          
-------------------------------
- Append
-   ->  Seq Scan on rlp1 rlp_1
-         Filter: (a <= 1)
-   ->  Seq Scan on rlp2 rlp_2
-         Filter: (a <= 1)
-(5 rows)
-
-explain (costs off) select * from rlp where a = 1;
-      QUERY PLAN      
-----------------------
- Seq Scan on rlp2 rlp
-   Filter: (a = 1)
-(2 rows)
-
-explain (costs off) select * from rlp where a = 1::bigint;		/* same as above */
-         QUERY PLAN          
------------------------------
- Seq Scan on rlp2 rlp
-   Filter: (a = '1'::bigint)
-(2 rows)
-
-explain (costs off) select * from rlp where a = 1::numeric;		/* no pruning */
-                  QUERY PLAN                   
------------------------------------------------
- Append
-   ->  Seq Scan on rlp1 rlp_1
-         Filter: ((a)::numeric = '1'::numeric)
-   ->  Seq Scan on rlp2 rlp_2
-         Filter: ((a)::numeric = '1'::numeric)
-   ->  Seq Scan on rlp3abcd rlp_3
-         Filter: ((a)::numeric = '1'::numeric)
-   ->  Seq Scan on rlp3efgh rlp_4
-         Filter: ((a)::numeric = '1'::numeric)
-   ->  Seq Scan on rlp3nullxy rlp_5
-         Filter: ((a)::numeric = '1'::numeric)
-   ->  Seq Scan on rlp3_default rlp_6
-         Filter: ((a)::numeric = '1'::numeric)
-   ->  Seq Scan on rlp4_1 rlp_7
-         Filter: ((a)::numeric = '1'::numeric)
-   ->  Seq Scan on rlp4_2 rlp_8
-         Filter: ((a)::numeric = '1'::numeric)
-   ->  Seq Scan on rlp4_default rlp_9
-         Filter: ((a)::numeric = '1'::numeric)
-   ->  Seq Scan on rlp5_1 rlp_10
-         Filter: ((a)::numeric = '1'::numeric)
-   ->  Seq Scan on rlp5_default rlp_11
-         Filter: ((a)::numeric = '1'::numeric)
-   ->  Seq Scan on rlp_default_10 rlp_12
-         Filter: ((a)::numeric = '1'::numeric)
-   ->  Seq Scan on rlp_default_30 rlp_13
-         Filter: ((a)::numeric = '1'::numeric)
-   ->  Seq Scan on rlp_default_null rlp_14
-         Filter: ((a)::numeric = '1'::numeric)
-   ->  Seq Scan on rlp_default_default rlp_15
-         Filter: ((a)::numeric = '1'::numeric)
-(31 rows)
-
-explain (costs off) select * from rlp where a <= 10;
-                 QUERY PLAN                  
----------------------------------------------
- Append
-   ->  Seq Scan on rlp1 rlp_1
-         Filter: (a <= 10)
-   ->  Seq Scan on rlp2 rlp_2
-         Filter: (a <= 10)
-   ->  Seq Scan on rlp_default_10 rlp_3
-         Filter: (a <= 10)
-   ->  Seq Scan on rlp_default_default rlp_4
-         Filter: (a <= 10)
-(9 rows)
-
-explain (costs off) select * from rlp where a > 10;
-                  QUERY PLAN                  
-----------------------------------------------
- Append
-   ->  Seq Scan on rlp3abcd rlp_1
-         Filter: (a > 10)
-   ->  Seq Scan on rlp3efgh rlp_2
-         Filter: (a > 10)
-   ->  Seq Scan on rlp3nullxy rlp_3
-         Filter: (a > 10)
-   ->  Seq Scan on rlp3_default rlp_4
-         Filter: (a > 10)
-   ->  Seq Scan on rlp4_1 rlp_5
-         Filter: (a > 10)
-   ->  Seq Scan on rlp4_2 rlp_6
-         Filter: (a > 10)
-   ->  Seq Scan on rlp4_default rlp_7
-         Filter: (a > 10)
-   ->  Seq Scan on rlp5_1 rlp_8
-         Filter: (a > 10)
-   ->  Seq Scan on rlp5_default rlp_9
-         Filter: (a > 10)
-   ->  Seq Scan on rlp_default_30 rlp_10
-         Filter: (a > 10)
-   ->  Seq Scan on rlp_default_default rlp_11
-         Filter: (a > 10)
-(23 rows)
-
-explain (costs off) select * from rlp where a < 15;
-                 QUERY PLAN                  
----------------------------------------------
- Append
-   ->  Seq Scan on rlp1 rlp_1
-         Filter: (a < 15)
-   ->  Seq Scan on rlp2 rlp_2
-         Filter: (a < 15)
-   ->  Seq Scan on rlp_default_10 rlp_3
-         Filter: (a < 15)
-   ->  Seq Scan on rlp_default_default rlp_4
-         Filter: (a < 15)
-(9 rows)
-
-explain (costs off) select * from rlp where a <= 15;
-                 QUERY PLAN                  
----------------------------------------------
- Append
-   ->  Seq Scan on rlp1 rlp_1
-         Filter: (a <= 15)
-   ->  Seq Scan on rlp2 rlp_2
-         Filter: (a <= 15)
-   ->  Seq Scan on rlp3abcd rlp_3
-         Filter: (a <= 15)
-   ->  Seq Scan on rlp3efgh rlp_4
-         Filter: (a <= 15)
-   ->  Seq Scan on rlp3nullxy rlp_5
-         Filter: (a <= 15)
-   ->  Seq Scan on rlp3_default rlp_6
-         Filter: (a <= 15)
-   ->  Seq Scan on rlp_default_10 rlp_7
-         Filter: (a <= 15)
-   ->  Seq Scan on rlp_default_default rlp_8
-         Filter: (a <= 15)
-(17 rows)
-
-explain (costs off) select * from rlp where a > 15 and b = 'ab';
-                       QUERY PLAN                        
----------------------------------------------------------
- Append
-   ->  Seq Scan on rlp3abcd rlp_1
-         Filter: ((a > 15) AND ((b)::text = 'ab'::text))
-   ->  Seq Scan on rlp4_1 rlp_2
-         Filter: ((a > 15) AND ((b)::text = 'ab'::text))
-   ->  Seq Scan on rlp4_2 rlp_3
-         Filter: ((a > 15) AND ((b)::text = 'ab'::text))
-   ->  Seq Scan on rlp4_default rlp_4
-         Filter: ((a > 15) AND ((b)::text = 'ab'::text))
-   ->  Seq Scan on rlp5_1 rlp_5
-         Filter: ((a > 15) AND ((b)::text = 'ab'::text))
-   ->  Seq Scan on rlp5_default rlp_6
-         Filter: ((a > 15) AND ((b)::text = 'ab'::text))
-   ->  Seq Scan on rlp_default_30 rlp_7
-         Filter: ((a > 15) AND ((b)::text = 'ab'::text))
-   ->  Seq Scan on rlp_default_default rlp_8
-         Filter: ((a > 15) AND ((b)::text = 'ab'::text))
-(17 rows)
-
-explain (costs off) select * from rlp where a = 16;
-              QUERY PLAN              
---------------------------------------
- Append
-   ->  Seq Scan on rlp3abcd rlp_1
-         Filter: (a = 16)
-   ->  Seq Scan on rlp3efgh rlp_2
-         Filter: (a = 16)
-   ->  Seq Scan on rlp3nullxy rlp_3
-         Filter: (a = 16)
-   ->  Seq Scan on rlp3_default rlp_4
-         Filter: (a = 16)
-(9 rows)
-
-explain (costs off) select * from rlp where a = 16 and b in ('not', 'in', 'here');
-                              QUERY PLAN                              
-----------------------------------------------------------------------
- Seq Scan on rlp3_default rlp
-   Filter: ((a = 16) AND ((b)::text = ANY ('{not,in,here}'::text[])))
-(2 rows)
-
-explain (costs off) select * from rlp where a = 16 and b < 'ab';
-                    QUERY PLAN                     
----------------------------------------------------
- Seq Scan on rlp3_default rlp
-   Filter: (((b)::text < 'ab'::text) AND (a = 16))
-(2 rows)
-
-explain (costs off) select * from rlp where a = 16 and b <= 'ab';
-                        QUERY PLAN                        
-----------------------------------------------------------
- Append
-   ->  Seq Scan on rlp3abcd rlp_1
-         Filter: (((b)::text <= 'ab'::text) AND (a = 16))
-   ->  Seq Scan on rlp3_default rlp_2
-         Filter: (((b)::text <= 'ab'::text) AND (a = 16))
-(5 rows)
-
-explain (costs off) select * from rlp where a = 16 and b is null;
-              QUERY PLAN              
---------------------------------------
- Seq Scan on rlp3nullxy rlp
-   Filter: ((b IS NULL) AND (a = 16))
-(2 rows)
-
-explain (costs off) select * from rlp where a = 16 and b is not null;
-                   QUERY PLAN                   
-------------------------------------------------
- Append
-   ->  Seq Scan on rlp3abcd rlp_1
-         Filter: ((b IS NOT NULL) AND (a = 16))
-   ->  Seq Scan on rlp3efgh rlp_2
-         Filter: ((b IS NOT NULL) AND (a = 16))
-   ->  Seq Scan on rlp3nullxy rlp_3
-         Filter: ((b IS NOT NULL) AND (a = 16))
-   ->  Seq Scan on rlp3_default rlp_4
-         Filter: ((b IS NOT NULL) AND (a = 16))
-(9 rows)
-
-explain (costs off) select * from rlp where a is null;
-            QUERY PLAN            
-----------------------------------
- Seq Scan on rlp_default_null rlp
-   Filter: (a IS NULL)
-(2 rows)
-
-explain (costs off) select * from rlp where a is not null;
-                  QUERY PLAN                  
-----------------------------------------------
- Append
-   ->  Seq Scan on rlp1 rlp_1
-         Filter: (a IS NOT NULL)
-   ->  Seq Scan on rlp2 rlp_2
-         Filter: (a IS NOT NULL)
-   ->  Seq Scan on rlp3abcd rlp_3
-         Filter: (a IS NOT NULL)
-   ->  Seq Scan on rlp3efgh rlp_4
-         Filter: (a IS NOT NULL)
-   ->  Seq Scan on rlp3nullxy rlp_5
-         Filter: (a IS NOT NULL)
-   ->  Seq Scan on rlp3_default rlp_6
-         Filter: (a IS NOT NULL)
-   ->  Seq Scan on rlp4_1 rlp_7
-         Filter: (a IS NOT NULL)
-   ->  Seq Scan on rlp4_2 rlp_8
-         Filter: (a IS NOT NULL)
-   ->  Seq Scan on rlp4_default rlp_9
-         Filter: (a IS NOT NULL)
-   ->  Seq Scan on rlp5_1 rlp_10
-         Filter: (a IS NOT NULL)
-   ->  Seq Scan on rlp5_default rlp_11
-         Filter: (a IS NOT NULL)
-   ->  Seq Scan on rlp_default_10 rlp_12
-         Filter: (a IS NOT NULL)
-   ->  Seq Scan on rlp_default_30 rlp_13
-         Filter: (a IS NOT NULL)
-   ->  Seq Scan on rlp_default_default rlp_14
-         Filter: (a IS NOT NULL)
-(29 rows)
-
-explain (costs off) select * from rlp where a > 30;
-                 QUERY PLAN                  
----------------------------------------------
- Append
-   ->  Seq Scan on rlp5_1 rlp_1
-         Filter: (a > 30)
-   ->  Seq Scan on rlp5_default rlp_2
-         Filter: (a > 30)
-   ->  Seq Scan on rlp_default_default rlp_3
-         Filter: (a > 30)
-(7 rows)
-
-explain (costs off) select * from rlp where a = 30;	/* only default is scanned */
-           QUERY PLAN           
---------------------------------
- Seq Scan on rlp_default_30 rlp
-   Filter: (a = 30)
-(2 rows)
-
-explain (costs off) select * from rlp where a <= 31;
-                  QUERY PLAN                  
-----------------------------------------------
- Append
-   ->  Seq Scan on rlp1 rlp_1
-         Filter: (a <= 31)
-   ->  Seq Scan on rlp2 rlp_2
-         Filter: (a <= 31)
-   ->  Seq Scan on rlp3abcd rlp_3
-         Filter: (a <= 31)
-   ->  Seq Scan on rlp3efgh rlp_4
-         Filter: (a <= 31)
-   ->  Seq Scan on rlp3nullxy rlp_5
-         Filter: (a <= 31)
-   ->  Seq Scan on rlp3_default rlp_6
-         Filter: (a <= 31)
-   ->  Seq Scan on rlp4_1 rlp_7
-         Filter: (a <= 31)
-   ->  Seq Scan on rlp4_2 rlp_8
-         Filter: (a <= 31)
-   ->  Seq Scan on rlp4_default rlp_9
-         Filter: (a <= 31)
-   ->  Seq Scan on rlp5_1 rlp_10
-         Filter: (a <= 31)
-   ->  Seq Scan on rlp_default_10 rlp_11
-         Filter: (a <= 31)
-   ->  Seq Scan on rlp_default_30 rlp_12
-         Filter: (a <= 31)
-   ->  Seq Scan on rlp_default_default rlp_13
-         Filter: (a <= 31)
-(27 rows)
-
-explain (costs off) select * from rlp where a = 1 or a = 7;
-           QUERY PLAN           
---------------------------------
- Seq Scan on rlp2 rlp
-   Filter: ((a = 1) OR (a = 7))
-(2 rows)
-
-explain (costs off) select * from rlp where a = 1 or b = 'ab';
-                      QUERY PLAN                       
--------------------------------------------------------
- Append
-   ->  Seq Scan on rlp1 rlp_1
-         Filter: ((a = 1) OR ((b)::text = 'ab'::text))
-   ->  Seq Scan on rlp2 rlp_2
-         Filter: ((a = 1) OR ((b)::text = 'ab'::text))
-   ->  Seq Scan on rlp3abcd rlp_3
-         Filter: ((a = 1) OR ((b)::text = 'ab'::text))
-   ->  Seq Scan on rlp4_1 rlp_4
-         Filter: ((a = 1) OR ((b)::text = 'ab'::text))
-   ->  Seq Scan on rlp4_2 rlp_5
-         Filter: ((a = 1) OR ((b)::text = 'ab'::text))
-   ->  Seq Scan on rlp4_default rlp_6
-         Filter: ((a = 1) OR ((b)::text = 'ab'::text))
-   ->  Seq Scan on rlp5_1 rlp_7
-         Filter: ((a = 1) OR ((b)::text = 'ab'::text))
-   ->  Seq Scan on rlp5_default rlp_8
-         Filter: ((a = 1) OR ((b)::text = 'ab'::text))
-   ->  Seq Scan on rlp_default_10 rlp_9
-         Filter: ((a = 1) OR ((b)::text = 'ab'::text))
-   ->  Seq Scan on rlp_default_30 rlp_10
-         Filter: ((a = 1) OR ((b)::text = 'ab'::text))
-   ->  Seq Scan on rlp_default_null rlp_11
-         Filter: ((a = 1) OR ((b)::text = 'ab'::text))
-   ->  Seq Scan on rlp_default_default rlp_12
-         Filter: ((a = 1) OR ((b)::text = 'ab'::text))
-(25 rows)
-
-explain (costs off) select * from rlp where a > 20 and a < 27;
-               QUERY PLAN                
------------------------------------------
- Append
-   ->  Seq Scan on rlp4_1 rlp_1
-         Filter: ((a > 20) AND (a < 27))
-   ->  Seq Scan on rlp4_2 rlp_2
-         Filter: ((a > 20) AND (a < 27))
-(5 rows)
-
-explain (costs off) select * from rlp where a = 29;
-          QUERY PLAN          
-------------------------------
- Seq Scan on rlp4_default rlp
-   Filter: (a = 29)
-(2 rows)
-
-explain (costs off) select * from rlp where a >= 29;
-                 QUERY PLAN                  
----------------------------------------------
- Append
-   ->  Seq Scan on rlp4_default rlp_1
-         Filter: (a >= 29)
-   ->  Seq Scan on rlp5_1 rlp_2
-         Filter: (a >= 29)
-   ->  Seq Scan on rlp5_default rlp_3
-         Filter: (a >= 29)
-   ->  Seq Scan on rlp_default_30 rlp_4
-         Filter: (a >= 29)
-   ->  Seq Scan on rlp_default_default rlp_5
-         Filter: (a >= 29)
-(11 rows)
-
-explain (costs off) select * from rlp where a < 1 or (a > 20 and a < 25);
-                      QUERY PLAN                      
-------------------------------------------------------
- Append
-   ->  Seq Scan on rlp1 rlp_1
-         Filter: ((a < 1) OR ((a > 20) AND (a < 25)))
-   ->  Seq Scan on rlp4_1 rlp_2
-         Filter: ((a < 1) OR ((a > 20) AND (a < 25)))
-(5 rows)
-
--- where clause contradicts sub-partition's constraint
-explain (costs off) select * from rlp where a = 20 or a = 40;
-               QUERY PLAN               
-----------------------------------------
- Append
-   ->  Seq Scan on rlp4_1 rlp_1
-         Filter: ((a = 20) OR (a = 40))
-   ->  Seq Scan on rlp5_default rlp_2
-         Filter: ((a = 20) OR (a = 40))
-(5 rows)
-
-explain (costs off) select * from rlp3 where a = 20;   /* empty */
-        QUERY PLAN        
---------------------------
- Result
-   One-Time Filter: false
-(2 rows)
-
--- redundant clauses are eliminated
-explain (costs off) select * from rlp where a > 1 and a = 10;	/* only default */
-            QUERY PLAN            
-----------------------------------
- Seq Scan on rlp_default_10 rlp
-   Filter: ((a > 1) AND (a = 10))
-(2 rows)
-
-explain (costs off) select * from rlp where a > 1 and a >=15;	/* rlp3 onwards, including default */
-                  QUERY PLAN                  
-----------------------------------------------
- Append
-   ->  Seq Scan on rlp3abcd rlp_1
-         Filter: ((a > 1) AND (a >= 15))
-   ->  Seq Scan on rlp3efgh rlp_2
-         Filter: ((a > 1) AND (a >= 15))
-   ->  Seq Scan on rlp3nullxy rlp_3
-         Filter: ((a > 1) AND (a >= 15))
-   ->  Seq Scan on rlp3_default rlp_4
-         Filter: ((a > 1) AND (a >= 15))
-   ->  Seq Scan on rlp4_1 rlp_5
-         Filter: ((a > 1) AND (a >= 15))
-   ->  Seq Scan on rlp4_2 rlp_6
-         Filter: ((a > 1) AND (a >= 15))
-   ->  Seq Scan on rlp4_default rlp_7
-         Filter: ((a > 1) AND (a >= 15))
-   ->  Seq Scan on rlp5_1 rlp_8
-         Filter: ((a > 1) AND (a >= 15))
-   ->  Seq Scan on rlp5_default rlp_9
-         Filter: ((a > 1) AND (a >= 15))
-   ->  Seq Scan on rlp_default_30 rlp_10
-         Filter: ((a > 1) AND (a >= 15))
-   ->  Seq Scan on rlp_default_default rlp_11
-         Filter: ((a > 1) AND (a >= 15))
-(23 rows)
-
-explain (costs off) select * from rlp where a = 1 and a = 3;	/* empty */
-        QUERY PLAN        
---------------------------
- Result
-   One-Time Filter: false
-(2 rows)
-
-explain (costs off) select * from rlp where (a = 1 and a = 3) or (a > 1 and a = 15);
-                            QUERY PLAN                             
--------------------------------------------------------------------
- Append
-   ->  Seq Scan on rlp2 rlp_1
-         Filter: (((a = 1) AND (a = 3)) OR ((a > 1) AND (a = 15)))
-   ->  Seq Scan on rlp3abcd rlp_2
-         Filter: (((a = 1) AND (a = 3)) OR ((a > 1) AND (a = 15)))
-   ->  Seq Scan on rlp3efgh rlp_3
-         Filter: (((a = 1) AND (a = 3)) OR ((a > 1) AND (a = 15)))
-   ->  Seq Scan on rlp3nullxy rlp_4
-         Filter: (((a = 1) AND (a = 3)) OR ((a > 1) AND (a = 15)))
-   ->  Seq Scan on rlp3_default rlp_5
-         Filter: (((a = 1) AND (a = 3)) OR ((a > 1) AND (a = 15)))
-(11 rows)
-
--- multi-column keys
-create table mc3p (a int, b int, c int) partition by range (a, abs(b), c);
-create table mc3p_default partition of mc3p default;
-create table mc3p0 partition of mc3p for values from (minvalue, minvalue, minvalue) to (1, 1, 1);
-create table mc3p1 partition of mc3p for values from (1, 1, 1) to (10, 5, 10);
-create table mc3p2 partition of mc3p for values from (10, 5, 10) to (10, 10, 10);
-create table mc3p3 partition of mc3p for values from (10, 10, 10) to (10, 10, 20);
-create table mc3p4 partition of mc3p for values from (10, 10, 20) to (10, maxvalue, maxvalue);
-create table mc3p5 partition of mc3p for values from (11, 1, 1) to (20, 10, 10);
-create table mc3p6 partition of mc3p for values from (20, 10, 10) to (20, 20, 20);
-create table mc3p7 partition of mc3p for values from (20, 20, 20) to (maxvalue, maxvalue, maxvalue);
-explain (costs off) select * from mc3p where a = 1;
-              QUERY PLAN               
----------------------------------------
- Append
-   ->  Seq Scan on mc3p0 mc3p_1
-         Filter: (a = 1)
-   ->  Seq Scan on mc3p1 mc3p_2
-         Filter: (a = 1)
-   ->  Seq Scan on mc3p_default mc3p_3
-         Filter: (a = 1)
-(7 rows)
-
-explain (costs off) select * from mc3p where a = 1 and abs(b) < 1;
-                 QUERY PLAN                 
---------------------------------------------
- Append
-   ->  Seq Scan on mc3p0 mc3p_1
-         Filter: ((a = 1) AND (abs(b) < 1))
-   ->  Seq Scan on mc3p_default mc3p_2
-         Filter: ((a = 1) AND (abs(b) < 1))
-(5 rows)
-
-explain (costs off) select * from mc3p where a = 1 and abs(b) = 1;
-                 QUERY PLAN                 
---------------------------------------------
- Append
-   ->  Seq Scan on mc3p0 mc3p_1
-         Filter: ((a = 1) AND (abs(b) = 1))
-   ->  Seq Scan on mc3p1 mc3p_2
-         Filter: ((a = 1) AND (abs(b) = 1))
-   ->  Seq Scan on mc3p_default mc3p_3
-         Filter: ((a = 1) AND (abs(b) = 1))
-(7 rows)
-
-explain (costs off) select * from mc3p where a = 1 and abs(b) = 1 and c < 8;
-                       QUERY PLAN                       
---------------------------------------------------------
- Append
-   ->  Seq Scan on mc3p0 mc3p_1
-         Filter: ((c < 8) AND (a = 1) AND (abs(b) = 1))
-   ->  Seq Scan on mc3p1 mc3p_2
-         Filter: ((c < 8) AND (a = 1) AND (abs(b) = 1))
-(5 rows)
-
-explain (costs off) select * from mc3p where a = 10 and abs(b) between 5 and 35;
-                           QUERY PLAN                            
------------------------------------------------------------------
- Append
-   ->  Seq Scan on mc3p1 mc3p_1
-         Filter: ((a = 10) AND (abs(b) >= 5) AND (abs(b) <= 35))
-   ->  Seq Scan on mc3p2 mc3p_2
-         Filter: ((a = 10) AND (abs(b) >= 5) AND (abs(b) <= 35))
-   ->  Seq Scan on mc3p3 mc3p_3
-         Filter: ((a = 10) AND (abs(b) >= 5) AND (abs(b) <= 35))
-   ->  Seq Scan on mc3p4 mc3p_4
-         Filter: ((a = 10) AND (abs(b) >= 5) AND (abs(b) <= 35))
-   ->  Seq Scan on mc3p_default mc3p_5
-         Filter: ((a = 10) AND (abs(b) >= 5) AND (abs(b) <= 35))
-(11 rows)
-
-explain (costs off) select * from mc3p where a > 10;
-              QUERY PLAN               
----------------------------------------
- Append
-   ->  Seq Scan on mc3p5 mc3p_1
-         Filter: (a > 10)
-   ->  Seq Scan on mc3p6 mc3p_2
-         Filter: (a > 10)
-   ->  Seq Scan on mc3p7 mc3p_3
-         Filter: (a > 10)
-   ->  Seq Scan on mc3p_default mc3p_4
-         Filter: (a > 10)
-(9 rows)
-
-explain (costs off) select * from mc3p where a >= 10;
-              QUERY PLAN               
----------------------------------------
- Append
-   ->  Seq Scan on mc3p1 mc3p_1
-         Filter: (a >= 10)
-   ->  Seq Scan on mc3p2 mc3p_2
-         Filter: (a >= 10)
-   ->  Seq Scan on mc3p3 mc3p_3
-         Filter: (a >= 10)
-   ->  Seq Scan on mc3p4 mc3p_4
-         Filter: (a >= 10)
-   ->  Seq Scan on mc3p5 mc3p_5
-         Filter: (a >= 10)
-   ->  Seq Scan on mc3p6 mc3p_6
-         Filter: (a >= 10)
-   ->  Seq Scan on mc3p7 mc3p_7
-         Filter: (a >= 10)
-   ->  Seq Scan on mc3p_default mc3p_8
-         Filter: (a >= 10)
-(17 rows)
-
-explain (costs off) select * from mc3p where a < 10;
-              QUERY PLAN               
----------------------------------------
- Append
-   ->  Seq Scan on mc3p0 mc3p_1
-         Filter: (a < 10)
-   ->  Seq Scan on mc3p1 mc3p_2
-         Filter: (a < 10)
-   ->  Seq Scan on mc3p_default mc3p_3
-         Filter: (a < 10)
-(7 rows)
-
-explain (costs off) select * from mc3p where a <= 10 and abs(b) < 10;
-                  QUERY PLAN                   
------------------------------------------------
- Append
-   ->  Seq Scan on mc3p0 mc3p_1
-         Filter: ((a <= 10) AND (abs(b) < 10))
-   ->  Seq Scan on mc3p1 mc3p_2
-         Filter: ((a <= 10) AND (abs(b) < 10))
-   ->  Seq Scan on mc3p2 mc3p_3
-         Filter: ((a <= 10) AND (abs(b) < 10))
-   ->  Seq Scan on mc3p_default mc3p_4
-         Filter: ((a <= 10) AND (abs(b) < 10))
-(9 rows)
-
-explain (costs off) select * from mc3p where a = 11 and abs(b) = 0;
-              QUERY PLAN               
----------------------------------------
- Seq Scan on mc3p_default mc3p
-   Filter: ((a = 11) AND (abs(b) = 0))
-(2 rows)
-
-explain (costs off) select * from mc3p where a = 20 and abs(b) = 10 and c = 100;
-                      QUERY PLAN                      
-------------------------------------------------------
- Seq Scan on mc3p6 mc3p
-   Filter: ((a = 20) AND (c = 100) AND (abs(b) = 10))
-(2 rows)
-
-explain (costs off) select * from mc3p where a > 20;
-              QUERY PLAN               
----------------------------------------
- Append
-   ->  Seq Scan on mc3p7 mc3p_1
-         Filter: (a > 20)
-   ->  Seq Scan on mc3p_default mc3p_2
-         Filter: (a > 20)
-(5 rows)
-
-explain (costs off) select * from mc3p where a >= 20;
-              QUERY PLAN               
----------------------------------------
- Append
-   ->  Seq Scan on mc3p5 mc3p_1
-         Filter: (a >= 20)
-   ->  Seq Scan on mc3p6 mc3p_2
-         Filter: (a >= 20)
-   ->  Seq Scan on mc3p7 mc3p_3
-         Filter: (a >= 20)
-   ->  Seq Scan on mc3p_default mc3p_4
-         Filter: (a >= 20)
-(9 rows)
-
-explain (costs off) select * from mc3p where (a = 1 and abs(b) = 1 and c = 1) or (a = 10 and abs(b) = 5 and c = 10) or (a > 11 and a < 20);
-                                                           QUERY PLAN                                                            
----------------------------------------------------------------------------------------------------------------------------------
- Append
-   ->  Seq Scan on mc3p1 mc3p_1
-         Filter: (((a = 1) AND (abs(b) = 1) AND (c = 1)) OR ((a = 10) AND (abs(b) = 5) AND (c = 10)) OR ((a > 11) AND (a < 20)))
-   ->  Seq Scan on mc3p2 mc3p_2
-         Filter: (((a = 1) AND (abs(b) = 1) AND (c = 1)) OR ((a = 10) AND (abs(b) = 5) AND (c = 10)) OR ((a > 11) AND (a < 20)))
-   ->  Seq Scan on mc3p5 mc3p_3
-         Filter: (((a = 1) AND (abs(b) = 1) AND (c = 1)) OR ((a = 10) AND (abs(b) = 5) AND (c = 10)) OR ((a > 11) AND (a < 20)))
-   ->  Seq Scan on mc3p_default mc3p_4
-         Filter: (((a = 1) AND (abs(b) = 1) AND (c = 1)) OR ((a = 10) AND (abs(b) = 5) AND (c = 10)) OR ((a > 11) AND (a < 20)))
-(9 rows)
-
-explain (costs off) select * from mc3p where (a = 1 and abs(b) = 1 and c = 1) or (a = 10 and abs(b) = 5 and c = 10) or (a > 11 and a < 20) or a < 1;
-                                                                 QUERY PLAN                                                                 
---------------------------------------------------------------------------------------------------------------------------------------------
- Append
-   ->  Seq Scan on mc3p0 mc3p_1
-         Filter: (((a = 1) AND (abs(b) = 1) AND (c = 1)) OR ((a = 10) AND (abs(b) = 5) AND (c = 10)) OR ((a > 11) AND (a < 20)) OR (a < 1))
-   ->  Seq Scan on mc3p1 mc3p_2
-         Filter: (((a = 1) AND (abs(b) = 1) AND (c = 1)) OR ((a = 10) AND (abs(b) = 5) AND (c = 10)) OR ((a > 11) AND (a < 20)) OR (a < 1))
-   ->  Seq Scan on mc3p2 mc3p_3
-         Filter: (((a = 1) AND (abs(b) = 1) AND (c = 1)) OR ((a = 10) AND (abs(b) = 5) AND (c = 10)) OR ((a > 11) AND (a < 20)) OR (a < 1))
-   ->  Seq Scan on mc3p5 mc3p_4
-         Filter: (((a = 1) AND (abs(b) = 1) AND (c = 1)) OR ((a = 10) AND (abs(b) = 5) AND (c = 10)) OR ((a > 11) AND (a < 20)) OR (a < 1))
-   ->  Seq Scan on mc3p_default mc3p_5
-         Filter: (((a = 1) AND (abs(b) = 1) AND (c = 1)) OR ((a = 10) AND (abs(b) = 5) AND (c = 10)) OR ((a > 11) AND (a < 20)) OR (a < 1))
-(11 rows)
-
-explain (costs off) select * from mc3p where (a = 1 and abs(b) = 1 and c = 1) or (a = 10 and abs(b) = 5 and c = 10) or (a > 11 and a < 20) or a < 1 or a = 1;
-                                                                      QUERY PLAN                                                                       
--------------------------------------------------------------------------------------------------------------------------------------------------------
- Append
-   ->  Seq Scan on mc3p0 mc3p_1
-         Filter: (((a = 1) AND (abs(b) = 1) AND (c = 1)) OR ((a = 10) AND (abs(b) = 5) AND (c = 10)) OR ((a > 11) AND (a < 20)) OR (a < 1) OR (a = 1))
-   ->  Seq Scan on mc3p1 mc3p_2
-         Filter: (((a = 1) AND (abs(b) = 1) AND (c = 1)) OR ((a = 10) AND (abs(b) = 5) AND (c = 10)) OR ((a > 11) AND (a < 20)) OR (a < 1) OR (a = 1))
-   ->  Seq Scan on mc3p2 mc3p_3
-         Filter: (((a = 1) AND (abs(b) = 1) AND (c = 1)) OR ((a = 10) AND (abs(b) = 5) AND (c = 10)) OR ((a > 11) AND (a < 20)) OR (a < 1) OR (a = 1))
-   ->  Seq Scan on mc3p5 mc3p_4
-         Filter: (((a = 1) AND (abs(b) = 1) AND (c = 1)) OR ((a = 10) AND (abs(b) = 5) AND (c = 10)) OR ((a > 11) AND (a < 20)) OR (a < 1) OR (a = 1))
-   ->  Seq Scan on mc3p_default mc3p_5
-         Filter: (((a = 1) AND (abs(b) = 1) AND (c = 1)) OR ((a = 10) AND (abs(b) = 5) AND (c = 10)) OR ((a > 11) AND (a < 20)) OR (a < 1) OR (a = 1))
-(11 rows)
-
-explain (costs off) select * from mc3p where a = 1 or abs(b) = 1 or c = 1;
-                      QUERY PLAN                      
-------------------------------------------------------
- Append
-   ->  Seq Scan on mc3p0 mc3p_1
-         Filter: ((a = 1) OR (abs(b) = 1) OR (c = 1))
-   ->  Seq Scan on mc3p1 mc3p_2
-         Filter: ((a = 1) OR (abs(b) = 1) OR (c = 1))
-   ->  Seq Scan on mc3p2 mc3p_3
-         Filter: ((a = 1) OR (abs(b) = 1) OR (c = 1))
-   ->  Seq Scan on mc3p3 mc3p_4
-         Filter: ((a = 1) OR (abs(b) = 1) OR (c = 1))
-   ->  Seq Scan on mc3p4 mc3p_5
-         Filter: ((a = 1) OR (abs(b) = 1) OR (c = 1))
-   ->  Seq Scan on mc3p5 mc3p_6
-         Filter: ((a = 1) OR (abs(b) = 1) OR (c = 1))
-   ->  Seq Scan on mc3p6 mc3p_7
-         Filter: ((a = 1) OR (abs(b) = 1) OR (c = 1))
-   ->  Seq Scan on mc3p7 mc3p_8
-         Filter: ((a = 1) OR (abs(b) = 1) OR (c = 1))
-   ->  Seq Scan on mc3p_default mc3p_9
-         Filter: ((a = 1) OR (abs(b) = 1) OR (c = 1))
-(19 rows)
-
-explain (costs off) select * from mc3p where (a = 1 and abs(b) = 1) or (a = 10 and abs(b) = 10);
-                                  QUERY PLAN                                  
-------------------------------------------------------------------------------
- Append
-   ->  Seq Scan on mc3p0 mc3p_1
-         Filter: (((a = 1) AND (abs(b) = 1)) OR ((a = 10) AND (abs(b) = 10)))
-   ->  Seq Scan on mc3p1 mc3p_2
-         Filter: (((a = 1) AND (abs(b) = 1)) OR ((a = 10) AND (abs(b) = 10)))
-   ->  Seq Scan on mc3p2 mc3p_3
-         Filter: (((a = 1) AND (abs(b) = 1)) OR ((a = 10) AND (abs(b) = 10)))
-   ->  Seq Scan on mc3p3 mc3p_4
-         Filter: (((a = 1) AND (abs(b) = 1)) OR ((a = 10) AND (abs(b) = 10)))
-   ->  Seq Scan on mc3p4 mc3p_5
-         Filter: (((a = 1) AND (abs(b) = 1)) OR ((a = 10) AND (abs(b) = 10)))
-   ->  Seq Scan on mc3p_default mc3p_6
-         Filter: (((a = 1) AND (abs(b) = 1)) OR ((a = 10) AND (abs(b) = 10)))
-(13 rows)
-
-explain (costs off) select * from mc3p where (a = 1 and abs(b) = 1) or (a = 10 and abs(b) = 9);
-                                 QUERY PLAN                                  
------------------------------------------------------------------------------
- Append
-   ->  Seq Scan on mc3p0 mc3p_1
-         Filter: (((a = 1) AND (abs(b) = 1)) OR ((a = 10) AND (abs(b) = 9)))
-   ->  Seq Scan on mc3p1 mc3p_2
-         Filter: (((a = 1) AND (abs(b) = 1)) OR ((a = 10) AND (abs(b) = 9)))
-   ->  Seq Scan on mc3p2 mc3p_3
-         Filter: (((a = 1) AND (abs(b) = 1)) OR ((a = 10) AND (abs(b) = 9)))
-   ->  Seq Scan on mc3p_default mc3p_4
-         Filter: (((a = 1) AND (abs(b) = 1)) OR ((a = 10) AND (abs(b) = 9)))
-(9 rows)
-
--- a simpler multi-column keys case
-create table mc2p (a int, b int) partition by range (a, b);
-create table mc2p_default partition of mc2p default;
-create table mc2p0 partition of mc2p for values from (minvalue, minvalue) to (1, minvalue);
-create table mc2p1 partition of mc2p for values from (1, minvalue) to (1, 1);
-create table mc2p2 partition of mc2p for values from (1, 1) to (2, minvalue);
-create table mc2p3 partition of mc2p for values from (2, minvalue) to (2, 1);
-create table mc2p4 partition of mc2p for values from (2, 1) to (2, maxvalue);
-create table mc2p5 partition of mc2p for values from (2, maxvalue) to (maxvalue, maxvalue);
-explain (costs off) select * from mc2p where a < 2;
-              QUERY PLAN               
----------------------------------------
- Append
-   ->  Seq Scan on mc2p0 mc2p_1
-         Filter: (a < 2)
-   ->  Seq Scan on mc2p1 mc2p_2
-         Filter: (a < 2)
-   ->  Seq Scan on mc2p2 mc2p_3
-         Filter: (a < 2)
-   ->  Seq Scan on mc2p_default mc2p_4
-         Filter: (a < 2)
-(9 rows)
-
-explain (costs off) select * from mc2p where a = 2 and b < 1;
-           QUERY PLAN            
----------------------------------
- Seq Scan on mc2p3 mc2p
-   Filter: ((b < 1) AND (a = 2))
-(2 rows)
-
-explain (costs off) select * from mc2p where a > 1;
-              QUERY PLAN               
----------------------------------------
- Append
-   ->  Seq Scan on mc2p2 mc2p_1
-         Filter: (a > 1)
-   ->  Seq Scan on mc2p3 mc2p_2
-         Filter: (a > 1)
-   ->  Seq Scan on mc2p4 mc2p_3
-         Filter: (a > 1)
-   ->  Seq Scan on mc2p5 mc2p_4
-         Filter: (a > 1)
-   ->  Seq Scan on mc2p_default mc2p_5
-         Filter: (a > 1)
-(11 rows)
-
-explain (costs off) select * from mc2p where a = 1 and b > 1;
-           QUERY PLAN            
----------------------------------
- Seq Scan on mc2p2 mc2p
-   Filter: ((b > 1) AND (a = 1))
-(2 rows)
-
--- all partitions but the default one should be pruned
-explain (costs off) select * from mc2p where a = 1 and b is null;
-             QUERY PLAN              
--------------------------------------
- Seq Scan on mc2p_default mc2p
-   Filter: ((b IS NULL) AND (a = 1))
-(2 rows)
-
-explain (costs off) select * from mc2p where a is null and b is null;
-               QUERY PLAN                
------------------------------------------
- Seq Scan on mc2p_default mc2p
-   Filter: ((a IS NULL) AND (b IS NULL))
-(2 rows)
-
-explain (costs off) select * from mc2p where a is null and b = 1;
-             QUERY PLAN              
--------------------------------------
- Seq Scan on mc2p_default mc2p
-   Filter: ((a IS NULL) AND (b = 1))
-(2 rows)
-
-explain (costs off) select * from mc2p where a is null;
-          QUERY PLAN           
--------------------------------
- Seq Scan on mc2p_default mc2p
-   Filter: (a IS NULL)
-(2 rows)
-
-explain (costs off) select * from mc2p where b is null;
-          QUERY PLAN           
--------------------------------
- Seq Scan on mc2p_default mc2p
-   Filter: (b IS NULL)
-(2 rows)
-
--- boolean partitioning
-create table boolpart (a bool) partition by list (a);
-create table boolpart_default partition of boolpart default;
-create table boolpart_t partition of boolpart for values in ('true');
-create table boolpart_f partition of boolpart for values in ('false');
-insert into boolpart values (true), (false), (null);
-explain (costs off) select * from boolpart where a in (true, false);
-                   QUERY PLAN                   
-------------------------------------------------
- Append
-   ->  Seq Scan on boolpart_f boolpart_1
-         Filter: (a = ANY ('{t,f}'::boolean[]))
-   ->  Seq Scan on boolpart_t boolpart_2
-         Filter: (a = ANY ('{t,f}'::boolean[]))
-(5 rows)
-
-explain (costs off) select * from boolpart where a = false;
-           QUERY PLAN            
----------------------------------
- Seq Scan on boolpart_f boolpart
-   Filter: (NOT a)
-(2 rows)
-
-explain (costs off) select * from boolpart where not a = false;
-           QUERY PLAN            
----------------------------------
- Seq Scan on boolpart_t boolpart
-   Filter: a
-(2 rows)
-
-explain (costs off) select * from boolpart where a is true or a is not true;
-                    QUERY PLAN                    
---------------------------------------------------
- Append
-   ->  Seq Scan on boolpart_f boolpart_1
-         Filter: ((a IS TRUE) OR (a IS NOT TRUE))
-   ->  Seq Scan on boolpart_t boolpart_2
-         Filter: ((a IS TRUE) OR (a IS NOT TRUE))
-   ->  Seq Scan on boolpart_default boolpart_3
-         Filter: ((a IS TRUE) OR (a IS NOT TRUE))
-(7 rows)
-
-explain (costs off) select * from boolpart where a is not true;
-                  QUERY PLAN                   
------------------------------------------------
- Append
-   ->  Seq Scan on boolpart_f boolpart_1
-         Filter: (a IS NOT TRUE)
-   ->  Seq Scan on boolpart_default boolpart_2
-         Filter: (a IS NOT TRUE)
-(5 rows)
-
-explain (costs off) select * from boolpart where a is not true and a is not false;
-                    QUERY PLAN                    
---------------------------------------------------
- Seq Scan on boolpart_default boolpart
-   Filter: ((a IS NOT TRUE) AND (a IS NOT FALSE))
-(2 rows)
-
-explain (costs off) select * from boolpart where a is unknown;
-              QUERY PLAN               
----------------------------------------
- Seq Scan on boolpart_default boolpart
-   Filter: (a IS UNKNOWN)
-(2 rows)
-
-explain (costs off) select * from boolpart where a is not unknown;
-                  QUERY PLAN                   
------------------------------------------------
- Append
-   ->  Seq Scan on boolpart_f boolpart_1
-         Filter: (a IS NOT UNKNOWN)
-   ->  Seq Scan on boolpart_t boolpart_2
-         Filter: (a IS NOT UNKNOWN)
-   ->  Seq Scan on boolpart_default boolpart_3
-         Filter: (a IS NOT UNKNOWN)
-(7 rows)
-
-select * from boolpart where a in (true, false);
- a 
----
- f
- t
-(2 rows)
-
-select * from boolpart where a = false;
- a 
----
- f
-(1 row)
-
-select * from boolpart where not a = false;
- a 
----
- t
-(1 row)
-
-select * from boolpart where a is true or a is not true;
- a 
----
- f
- t
- 
-(3 rows)
-
-select * from boolpart where a is not true;
- a 
----
- f
- 
-(2 rows)
-
-select * from boolpart where a is not true and a is not false;
- a 
----
- 
-(1 row)
-
-select * from boolpart where a is unknown;
- a 
----
- 
-(1 row)
-
-select * from boolpart where a is not unknown;
- a 
----
- f
- t
-(2 rows)
-
--- try some other permutations with a NULL partition instead of a DEFAULT
-delete from boolpart where a is null;
-create table boolpart_null partition of boolpart for values in (null);
-insert into boolpart values(null);
-explain (costs off) select * from boolpart where a is not true;
-                 QUERY PLAN                 
---------------------------------------------
- Append
-   ->  Seq Scan on boolpart_f boolpart_1
-         Filter: (a IS NOT TRUE)
-   ->  Seq Scan on boolpart_null boolpart_2
-         Filter: (a IS NOT TRUE)
-(5 rows)
-
-explain (costs off) select * from boolpart where a is not true and a is not false;
-                    QUERY PLAN                    
---------------------------------------------------
- Seq Scan on boolpart_null boolpart
-   Filter: ((a IS NOT TRUE) AND (a IS NOT FALSE))
-(2 rows)
-
-explain (costs off) select * from boolpart where a is not false;
-                 QUERY PLAN                 
---------------------------------------------
- Append
-   ->  Seq Scan on boolpart_t boolpart_1
-         Filter: (a IS NOT FALSE)
-   ->  Seq Scan on boolpart_null boolpart_2
-         Filter: (a IS NOT FALSE)
-(5 rows)
-
-explain (costs off) select * from boolpart where a is not unknown;
-                  QUERY PLAN                   
------------------------------------------------
- Append
-   ->  Seq Scan on boolpart_f boolpart_1
-         Filter: (a IS NOT UNKNOWN)
-   ->  Seq Scan on boolpart_t boolpart_2
-         Filter: (a IS NOT UNKNOWN)
-   ->  Seq Scan on boolpart_default boolpart_3
-         Filter: (a IS NOT UNKNOWN)
-(7 rows)
-
-select * from boolpart where a is not true;
- a 
----
- f
- 
-(2 rows)
-
-select * from boolpart where a is not true and a is not false;
- a 
----
- 
-(1 row)
-
-select * from boolpart where a is not false;
- a 
----
- t
- 
-(2 rows)
-
-select * from boolpart where a is not unknown;
- a 
----
- f
- t
-(2 rows)
-
--- check that all partitions are pruned when faced with conflicting clauses
-explain (costs off) select * from boolpart where a is not unknown and a is unknown;
-        QUERY PLAN        
---------------------------
- Result
-   One-Time Filter: false
-(2 rows)
-
-explain (costs off) select * from boolpart where a is false and a is unknown;
-        QUERY PLAN        
---------------------------
- Result
-   One-Time Filter: false
-(2 rows)
-
-explain (costs off) select * from boolpart where a is true and a is unknown;
-        QUERY PLAN        
---------------------------
- Result
-   One-Time Filter: false
-(2 rows)
-
--- inverse boolean partitioning - a seemingly unlikely design, but we've got
--- code for it, so we'd better test it.
-create table iboolpart (a bool) partition by list ((not a));
-create table iboolpart_default partition of iboolpart default;
-create table iboolpart_f partition of iboolpart for values in ('true');
-create table iboolpart_t partition of iboolpart for values in ('false');
-insert into iboolpart values (true), (false), (null);
-explain (costs off) select * from iboolpart where a in (true, false);
-                   QUERY PLAN                    
--------------------------------------------------
- Append
-   ->  Seq Scan on iboolpart_t iboolpart_1
-         Filter: (a = ANY ('{t,f}'::boolean[]))
-   ->  Seq Scan on iboolpart_f iboolpart_2
-         Filter: (a = ANY ('{t,f}'::boolean[]))
-   ->  Seq Scan on iboolpart_default iboolpart_3
-         Filter: (a = ANY ('{t,f}'::boolean[]))
-(7 rows)
-
-explain (costs off) select * from iboolpart where a = false;
-            QUERY PLAN             
------------------------------------
- Seq Scan on iboolpart_f iboolpart
-   Filter: (NOT a)
-(2 rows)
-
-explain (costs off) select * from iboolpart where not a = false;
-            QUERY PLAN             
------------------------------------
- Seq Scan on iboolpart_t iboolpart
-   Filter: a
-(2 rows)
-
-explain (costs off) select * from iboolpart where a is true or a is not true;
-                    QUERY PLAN                    
---------------------------------------------------
- Append
-   ->  Seq Scan on iboolpart_t iboolpart_1
-         Filter: ((a IS TRUE) OR (a IS NOT TRUE))
-   ->  Seq Scan on iboolpart_f iboolpart_2
-         Filter: ((a IS TRUE) OR (a IS NOT TRUE))
-   ->  Seq Scan on iboolpart_default iboolpart_3
-         Filter: ((a IS TRUE) OR (a IS NOT TRUE))
-(7 rows)
-
-explain (costs off) select * from iboolpart where a is not true;
-                   QUERY PLAN                    
--------------------------------------------------
- Append
-   ->  Seq Scan on iboolpart_t iboolpart_1
-         Filter: (a IS NOT TRUE)
-   ->  Seq Scan on iboolpart_f iboolpart_2
-         Filter: (a IS NOT TRUE)
-   ->  Seq Scan on iboolpart_default iboolpart_3
-         Filter: (a IS NOT TRUE)
-(7 rows)
-
-explain (costs off) select * from iboolpart where a is not true and a is not false;
-                       QUERY PLAN                       
---------------------------------------------------------
- Append
-   ->  Seq Scan on iboolpart_t iboolpart_1
-         Filter: ((a IS NOT TRUE) AND (a IS NOT FALSE))
-   ->  Seq Scan on iboolpart_f iboolpart_2
-         Filter: ((a IS NOT TRUE) AND (a IS NOT FALSE))
-   ->  Seq Scan on iboolpart_default iboolpart_3
-         Filter: ((a IS NOT TRUE) AND (a IS NOT FALSE))
-(7 rows)
-
-explain (costs off) select * from iboolpart where a is unknown;
-                   QUERY PLAN                    
--------------------------------------------------
- Append
-   ->  Seq Scan on iboolpart_t iboolpart_1
-         Filter: (a IS UNKNOWN)
-   ->  Seq Scan on iboolpart_f iboolpart_2
-         Filter: (a IS UNKNOWN)
-   ->  Seq Scan on iboolpart_default iboolpart_3
-         Filter: (a IS UNKNOWN)
-(7 rows)
-
-explain (costs off) select * from iboolpart where a is not unknown;
-                   QUERY PLAN                    
--------------------------------------------------
- Append
-   ->  Seq Scan on iboolpart_t iboolpart_1
-         Filter: (a IS NOT UNKNOWN)
-   ->  Seq Scan on iboolpart_f iboolpart_2
-         Filter: (a IS NOT UNKNOWN)
-   ->  Seq Scan on iboolpart_default iboolpart_3
-         Filter: (a IS NOT UNKNOWN)
-(7 rows)
-
-select * from iboolpart where a in (true, false);
- a 
----
- t
- f
-(2 rows)
-
-select * from iboolpart where a = false;
- a 
----
- f
-(1 row)
-
-select * from iboolpart where not a = false;
- a 
----
- t
-(1 row)
-
-select * from iboolpart where a is true or a is not true;
- a 
----
- t
- f
- 
-(3 rows)
-
-select * from iboolpart where a is not true;
- a 
----
- f
- 
-(2 rows)
-
-select * from iboolpart where a is not true and a is not false;
- a 
----
- 
-(1 row)
-
-select * from iboolpart where a is unknown;
- a 
----
- 
-(1 row)
-
-select * from iboolpart where a is not unknown;
- a 
----
- t
- f
-(2 rows)
-
--- Try some other permutations with a NULL partition instead of a DEFAULT
-delete from iboolpart where a is null;
-create table iboolpart_null partition of iboolpart for values in (null);
-insert into iboolpart values(null);
--- Pruning shouldn't take place for these.  Just check the result is correct
-select * from iboolpart where a is not true;
- a 
----
- f
- 
-(2 rows)
-
-select * from iboolpart where a is not true and a is not false;
- a 
----
- 
-(1 row)
-
-select * from iboolpart where a is not false;
- a 
----
- t
- 
-(2 rows)
-
-create table boolrangep (a bool, b bool, c int) partition by range (a,b,c);
-create table boolrangep_tf partition of boolrangep for values from ('true', 'false', 0) to ('true', 'false', 100);
-create table boolrangep_ft partition of boolrangep for values from ('false', 'true', 0) to ('false', 'true', 100);
-create table boolrangep_ff1 partition of boolrangep for values from ('false', 'false', 0) to ('false', 'false', 50);
-create table boolrangep_ff2 partition of boolrangep for values from ('false', 'false', 50) to ('false', 'false', 100);
-create table boolrangep_null partition of boolrangep default;
--- try a more complex case that's been known to trip up pruning in the past
-explain (costs off)  select * from boolrangep where not a and not b and c = 25;
-                  QUERY PLAN                  
-----------------------------------------------
- Seq Scan on boolrangep_ff1 boolrangep
-   Filter: ((NOT a) AND (NOT b) AND (c = 25))
-(2 rows)
-
--- ensure we prune boolrangep_tf
-explain (costs off)  select * from boolrangep where a is not true and not b and c = 25;
-                         QUERY PLAN                         
-------------------------------------------------------------
- Append
-   ->  Seq Scan on boolrangep_ff1 boolrangep_1
-         Filter: ((a IS NOT TRUE) AND (NOT b) AND (c = 25))
-   ->  Seq Scan on boolrangep_ff2 boolrangep_2
-         Filter: ((a IS NOT TRUE) AND (NOT b) AND (c = 25))
-   ->  Seq Scan on boolrangep_ft boolrangep_3
-         Filter: ((a IS NOT TRUE) AND (NOT b) AND (c = 25))
-   ->  Seq Scan on boolrangep_null boolrangep_4
-         Filter: ((a IS NOT TRUE) AND (NOT b) AND (c = 25))
-(9 rows)
-
--- ensure we prune everything apart from boolrangep_tf and boolrangep_null
-explain (costs off)  select * from boolrangep where a is not false and not b and c = 25;
-                         QUERY PLAN                          
--------------------------------------------------------------
- Append
-   ->  Seq Scan on boolrangep_tf boolrangep_1
-         Filter: ((a IS NOT FALSE) AND (NOT b) AND (c = 25))
-   ->  Seq Scan on boolrangep_null boolrangep_2
-         Filter: ((a IS NOT FALSE) AND (NOT b) AND (c = 25))
-(5 rows)
-
--- test scalar-to-array operators
-create table coercepart (a varchar) partition by list (a);
-create table coercepart_ab partition of coercepart for values in ('ab');
-create table coercepart_bc partition of coercepart for values in ('bc');
-create table coercepart_cd partition of coercepart for values in ('cd');
-explain (costs off) select * from coercepart where a in ('ab', to_char(125, '999'));
-                                                          QUERY PLAN                                                          
-------------------------------------------------------------------------------------------------------------------------------
- Append
-   ->  Seq Scan on coercepart_ab coercepart_1
-         Filter: ((a)::text = ANY ((ARRAY['ab'::character varying, (to_char(125, '999'::text))::character varying])::text[]))
-   ->  Seq Scan on coercepart_bc coercepart_2
-         Filter: ((a)::text = ANY ((ARRAY['ab'::character varying, (to_char(125, '999'::text))::character varying])::text[]))
-   ->  Seq Scan on coercepart_cd coercepart_3
-         Filter: ((a)::text = ANY ((ARRAY['ab'::character varying, (to_char(125, '999'::text))::character varying])::text[]))
-(7 rows)
-
-explain (costs off) select * from coercepart where a ~ any ('{ab}');
-                     QUERY PLAN                     
-----------------------------------------------------
- Append
-   ->  Seq Scan on coercepart_ab coercepart_1
-         Filter: ((a)::text ~ ANY ('{ab}'::text[]))
-   ->  Seq Scan on coercepart_bc coercepart_2
-         Filter: ((a)::text ~ ANY ('{ab}'::text[]))
-   ->  Seq Scan on coercepart_cd coercepart_3
-         Filter: ((a)::text ~ ANY ('{ab}'::text[]))
-(7 rows)
-
-explain (costs off) select * from coercepart where a !~ all ('{ab}');
-                     QUERY PLAN                      
------------------------------------------------------
- Append
-   ->  Seq Scan on coercepart_ab coercepart_1
-         Filter: ((a)::text !~ ALL ('{ab}'::text[]))
-   ->  Seq Scan on coercepart_bc coercepart_2
-         Filter: ((a)::text !~ ALL ('{ab}'::text[]))
-   ->  Seq Scan on coercepart_cd coercepart_3
-         Filter: ((a)::text !~ ALL ('{ab}'::text[]))
-(7 rows)
-
-explain (costs off) select * from coercepart where a ~ any ('{ab,bc}');
-                      QUERY PLAN                       
--------------------------------------------------------
- Append
-   ->  Seq Scan on coercepart_ab coercepart_1
-         Filter: ((a)::text ~ ANY ('{ab,bc}'::text[]))
-   ->  Seq Scan on coercepart_bc coercepart_2
-         Filter: ((a)::text ~ ANY ('{ab,bc}'::text[]))
-   ->  Seq Scan on coercepart_cd coercepart_3
-         Filter: ((a)::text ~ ANY ('{ab,bc}'::text[]))
-(7 rows)
-
-explain (costs off) select * from coercepart where a !~ all ('{ab,bc}');
-                       QUERY PLAN                       
---------------------------------------------------------
- Append
-   ->  Seq Scan on coercepart_ab coercepart_1
-         Filter: ((a)::text !~ ALL ('{ab,bc}'::text[]))
-   ->  Seq Scan on coercepart_bc coercepart_2
-         Filter: ((a)::text !~ ALL ('{ab,bc}'::text[]))
-   ->  Seq Scan on coercepart_cd coercepart_3
-         Filter: ((a)::text !~ ALL ('{ab,bc}'::text[]))
-(7 rows)
-
-explain (costs off) select * from coercepart where a = any ('{ab,bc}');
-                      QUERY PLAN                       
--------------------------------------------------------
- Append
-   ->  Seq Scan on coercepart_ab coercepart_1
-         Filter: ((a)::text = ANY ('{ab,bc}'::text[]))
-   ->  Seq Scan on coercepart_bc coercepart_2
-         Filter: ((a)::text = ANY ('{ab,bc}'::text[]))
-(5 rows)
-
-explain (costs off) select * from coercepart where a = any ('{ab,null}');
-                    QUERY PLAN                     
----------------------------------------------------
- Seq Scan on coercepart_ab coercepart
-   Filter: ((a)::text = ANY ('{ab,NULL}'::text[]))
-(2 rows)
-
-explain (costs off) select * from coercepart where a = any (null::text[]);
-        QUERY PLAN        
---------------------------
- Result
-   One-Time Filter: false
-(2 rows)
-
-explain (costs off) select * from coercepart where a = all ('{ab}');
-                  QUERY PLAN                  
-----------------------------------------------
- Seq Scan on coercepart_ab coercepart
-   Filter: ((a)::text = ALL ('{ab}'::text[]))
-(2 rows)
-
-explain (costs off) select * from coercepart where a = all ('{ab,bc}');
-        QUERY PLAN        
---------------------------
- Result
-   One-Time Filter: false
-(2 rows)
-
-explain (costs off) select * from coercepart where a = all ('{ab,null}');
-        QUERY PLAN        
---------------------------
- Result
-   One-Time Filter: false
-(2 rows)
-
-explain (costs off) select * from coercepart where a = all (null::text[]);
-        QUERY PLAN        
---------------------------
- Result
-   One-Time Filter: false
-(2 rows)
-
-drop table coercepart;
-CREATE TABLE part (a INT, b INT) PARTITION BY LIST (a);
-CREATE TABLE part_p1 PARTITION OF part FOR VALUES IN (-2,-1,0,1,2);
-CREATE TABLE part_p2 PARTITION OF part DEFAULT PARTITION BY RANGE(a);
-CREATE TABLE part_p2_p1 PARTITION OF part_p2 DEFAULT;
-CREATE TABLE part_rev (b INT, c INT, a INT);
-ALTER TABLE part ATTACH PARTITION part_rev FOR VALUES IN (3);  -- fail
-ERROR:  table "part_rev" contains column "c" not found in parent "part"
-DETAIL:  The new partition may contain only the columns present in parent.
-ALTER TABLE part_rev DROP COLUMN c;
-ALTER TABLE part ATTACH PARTITION part_rev FOR VALUES IN (3);  -- now it's ok
-INSERT INTO part VALUES (-1,-1), (1,1), (2,NULL), (NULL,-2),(NULL,NULL);
-EXPLAIN (COSTS OFF) SELECT tableoid::regclass as part, a, b FROM part WHERE a IS NULL ORDER BY 1, 2, 3;
-                       QUERY PLAN                        
----------------------------------------------------------
- Sort
-   Sort Key: ((part.tableoid)::regclass), part.a, part.b
-   ->  Seq Scan on part_p2_p1 part
-         Filter: (a IS NULL)
-(4 rows)
-
-EXPLAIN (VERBOSE, COSTS OFF) SELECT * FROM part p(x) ORDER BY x;
-                  QUERY PLAN                   
------------------------------------------------
- Sort
-   Output: p.x, p.b
-   Sort Key: p.x
-   ->  Append
-         ->  Seq Scan on public.part_p1 p_1
-               Output: p_1.x, p_1.b
-         ->  Seq Scan on public.part_rev p_2
-               Output: p_2.x, p_2.b
-         ->  Seq Scan on public.part_p2_p1 p_3
-               Output: p_3.x, p_3.b
-(10 rows)
-
---
--- some more cases
---
---
--- pruning for partitioned table appearing inside a sub-query
---
--- pruning won't work for mc3p, because some keys are Params
-explain (costs off) select * from mc2p t1, lateral (select count(*) from mc3p t2 where t2.a = t1.b and abs(t2.b) = 1 and t2.c = 1) s where t1.a = 1;
-                              QUERY PLAN                               
------------------------------------------------------------------------
- Nested Loop
-   ->  Append
-         ->  Seq Scan on mc2p1 t1_1
-               Filter: (a = 1)
-         ->  Seq Scan on mc2p2 t1_2
-               Filter: (a = 1)
-         ->  Seq Scan on mc2p_default t1_3
-               Filter: (a = 1)
-   ->  Aggregate
-         ->  Append
-               ->  Seq Scan on mc3p0 t2_1
-                     Filter: ((a = t1.b) AND (c = 1) AND (abs(b) = 1))
-               ->  Seq Scan on mc3p1 t2_2
-                     Filter: ((a = t1.b) AND (c = 1) AND (abs(b) = 1))
-               ->  Seq Scan on mc3p2 t2_3
-                     Filter: ((a = t1.b) AND (c = 1) AND (abs(b) = 1))
-               ->  Seq Scan on mc3p3 t2_4
-                     Filter: ((a = t1.b) AND (c = 1) AND (abs(b) = 1))
-               ->  Seq Scan on mc3p4 t2_5
-                     Filter: ((a = t1.b) AND (c = 1) AND (abs(b) = 1))
-               ->  Seq Scan on mc3p5 t2_6
-                     Filter: ((a = t1.b) AND (c = 1) AND (abs(b) = 1))
-               ->  Seq Scan on mc3p6 t2_7
-                     Filter: ((a = t1.b) AND (c = 1) AND (abs(b) = 1))
-               ->  Seq Scan on mc3p7 t2_8
-                     Filter: ((a = t1.b) AND (c = 1) AND (abs(b) = 1))
-               ->  Seq Scan on mc3p_default t2_9
-                     Filter: ((a = t1.b) AND (c = 1) AND (abs(b) = 1))
-(28 rows)
-
--- pruning should work fine, because values for a prefix of keys (a, b) are
--- available
-explain (costs off) select * from mc2p t1, lateral (select count(*) from mc3p t2 where t2.c = t1.b and abs(t2.b) = 1 and t2.a = 1) s where t1.a = 1;
-                              QUERY PLAN                               
------------------------------------------------------------------------
- Nested Loop
-   ->  Append
-         ->  Seq Scan on mc2p1 t1_1
-               Filter: (a = 1)
-         ->  Seq Scan on mc2p2 t1_2
-               Filter: (a = 1)
-         ->  Seq Scan on mc2p_default t1_3
-               Filter: (a = 1)
-   ->  Aggregate
-         ->  Append
-               ->  Seq Scan on mc3p0 t2_1
-                     Filter: ((c = t1.b) AND (a = 1) AND (abs(b) = 1))
-               ->  Seq Scan on mc3p1 t2_2
-                     Filter: ((c = t1.b) AND (a = 1) AND (abs(b) = 1))
-               ->  Seq Scan on mc3p_default t2_3
-                     Filter: ((c = t1.b) AND (a = 1) AND (abs(b) = 1))
-(16 rows)
-
--- also here, because values for all keys are provided
-explain (costs off) select * from mc2p t1, lateral (select count(*) from mc3p t2 where t2.a = 1 and abs(t2.b) = 1 and t2.c = 1) s where t1.a = 1;
-                          QUERY PLAN                          
---------------------------------------------------------------
- Nested Loop
-   ->  Aggregate
-         ->  Seq Scan on mc3p1 t2
-               Filter: ((a = 1) AND (c = 1) AND (abs(b) = 1))
-   ->  Append
-         ->  Seq Scan on mc2p1 t1_1
-               Filter: (a = 1)
-         ->  Seq Scan on mc2p2 t1_2
-               Filter: (a = 1)
-         ->  Seq Scan on mc2p_default t1_3
-               Filter: (a = 1)
-(11 rows)
-
---
--- pruning with clauses containing <> operator
---
--- doesn't prune range partitions
-create table rp (a int) partition by range (a);
-create table rp0 partition of rp for values from (minvalue) to (1);
-create table rp1 partition of rp for values from (1) to (2);
-create table rp2 partition of rp for values from (2) to (maxvalue);
-explain (costs off) select * from rp where a <> 1;
-         QUERY PLAN         
-----------------------------
- Append
-   ->  Seq Scan on rp0 rp_1
-         Filter: (a <> 1)
-   ->  Seq Scan on rp1 rp_2
-         Filter: (a <> 1)
-   ->  Seq Scan on rp2 rp_3
-         Filter: (a <> 1)
-(7 rows)
-
-explain (costs off) select * from rp where a <> 1 and a <> 2;
-               QUERY PLAN                
------------------------------------------
- Append
-   ->  Seq Scan on rp0 rp_1
-         Filter: ((a <> 1) AND (a <> 2))
-   ->  Seq Scan on rp1 rp_2
-         Filter: ((a <> 1) AND (a <> 2))
-   ->  Seq Scan on rp2 rp_3
-         Filter: ((a <> 1) AND (a <> 2))
-(7 rows)
-
--- null partition should be eliminated due to strict <> clause.
-explain (costs off) select * from lp where a <> 'a';
-             QUERY PLAN             
-------------------------------------
- Append
-   ->  Seq Scan on lp_ad lp_1
-         Filter: (a <> 'a'::bpchar)
-   ->  Seq Scan on lp_bc lp_2
-         Filter: (a <> 'a'::bpchar)
-   ->  Seq Scan on lp_ef lp_3
-         Filter: (a <> 'a'::bpchar)
-   ->  Seq Scan on lp_g lp_4
-         Filter: (a <> 'a'::bpchar)
-   ->  Seq Scan on lp_default lp_5
-         Filter: (a <> 'a'::bpchar)
-(11 rows)
-
--- ensure we detect contradictions in clauses; a can't be NULL and NOT NULL.
-explain (costs off) select * from lp where a <> 'a' and a is null;
-        QUERY PLAN        
---------------------------
- Result
-   One-Time Filter: false
-(2 rows)
-
-explain (costs off) select * from lp where (a <> 'a' and a <> 'd') or a is null;
-                                  QUERY PLAN                                  
-------------------------------------------------------------------------------
- Append
-   ->  Seq Scan on lp_bc lp_1
-         Filter: (((a <> 'a'::bpchar) AND (a <> 'd'::bpchar)) OR (a IS NULL))
-   ->  Seq Scan on lp_ef lp_2
-         Filter: (((a <> 'a'::bpchar) AND (a <> 'd'::bpchar)) OR (a IS NULL))
-   ->  Seq Scan on lp_g lp_3
-         Filter: (((a <> 'a'::bpchar) AND (a <> 'd'::bpchar)) OR (a IS NULL))
-   ->  Seq Scan on lp_null lp_4
-         Filter: (((a <> 'a'::bpchar) AND (a <> 'd'::bpchar)) OR (a IS NULL))
-   ->  Seq Scan on lp_default lp_5
-         Filter: (((a <> 'a'::bpchar) AND (a <> 'd'::bpchar)) OR (a IS NULL))
-(11 rows)
-
--- check that it also works for a partitioned table that's not root,
--- which in this case are partitions of rlp that are themselves
--- list-partitioned on b
-explain (costs off) select * from rlp where a = 15 and b <> 'ab' and b <> 'cd' and b <> 'xy' and b is not null;
-                                                                QUERY PLAN                                                                
-------------------------------------------------------------------------------------------------------------------------------------------
- Append
-   ->  Seq Scan on rlp3efgh rlp_1
-         Filter: ((b IS NOT NULL) AND ((b)::text <> 'ab'::text) AND ((b)::text <> 'cd'::text) AND ((b)::text <> 'xy'::text) AND (a = 15))
-   ->  Seq Scan on rlp3_default rlp_2
-         Filter: ((b IS NOT NULL) AND ((b)::text <> 'ab'::text) AND ((b)::text <> 'cd'::text) AND ((b)::text <> 'xy'::text) AND (a = 15))
-(5 rows)
-
---
--- different collations for different keys with same expression
---
-create table coll_pruning_multi (a text) partition by range (substr(a, 1) collate "POSIX", substr(a, 1) collate "C");
-create table coll_pruning_multi1 partition of coll_pruning_multi for values from ('a', 'a') to ('a', 'e');
-create table coll_pruning_multi2 partition of coll_pruning_multi for values from ('a', 'e') to ('a', 'z');
-create table coll_pruning_multi3 partition of coll_pruning_multi for values from ('b', 'a') to ('b', 'e');
--- no pruning, because no value for the leading key
-explain (costs off) select * from coll_pruning_multi where substr(a, 1) = 'e' collate "C";
-                         QUERY PLAN                         
-------------------------------------------------------------
- Append
-   ->  Seq Scan on coll_pruning_multi1 coll_pruning_multi_1
-         Filter: (substr(a, 1) = 'e'::text COLLATE "C")
-   ->  Seq Scan on coll_pruning_multi2 coll_pruning_multi_2
-         Filter: (substr(a, 1) = 'e'::text COLLATE "C")
-   ->  Seq Scan on coll_pruning_multi3 coll_pruning_multi_3
-         Filter: (substr(a, 1) = 'e'::text COLLATE "C")
-(7 rows)
-
--- pruning, with a value provided for the leading key
-explain (costs off) select * from coll_pruning_multi where substr(a, 1) = 'a' collate "POSIX";
-                         QUERY PLAN                         
-------------------------------------------------------------
- Append
-   ->  Seq Scan on coll_pruning_multi1 coll_pruning_multi_1
-         Filter: (substr(a, 1) = 'a'::text COLLATE "POSIX")
-   ->  Seq Scan on coll_pruning_multi2 coll_pruning_multi_2
-         Filter: (substr(a, 1) = 'a'::text COLLATE "POSIX")
-(5 rows)
-
--- pruning, with values provided for both keys
-explain (costs off) select * from coll_pruning_multi where substr(a, 1) = 'e' collate "C" and substr(a, 1) = 'a' collate "POSIX";
-                                            QUERY PLAN                                             
----------------------------------------------------------------------------------------------------
- Seq Scan on coll_pruning_multi2 coll_pruning_multi
-   Filter: ((substr(a, 1) = 'e'::text COLLATE "C") AND (substr(a, 1) = 'a'::text COLLATE "POSIX"))
-(2 rows)
-
---
--- LIKE operators don't prune
---
-create table like_op_noprune (a text) partition by list (a);
-create table like_op_noprune1 partition of like_op_noprune for values in ('ABC');
-create table like_op_noprune2 partition of like_op_noprune for values in ('BCD');
-explain (costs off) select * from like_op_noprune where a like '%BC';
-                      QUERY PLAN                      
-------------------------------------------------------
- Append
-   ->  Seq Scan on like_op_noprune1 like_op_noprune_1
-         Filter: (a ~~ '%BC'::text)
-   ->  Seq Scan on like_op_noprune2 like_op_noprune_2
-         Filter: (a ~~ '%BC'::text)
-(5 rows)
-
---
--- tests wherein clause value requires a cross-type comparison function
---
-create table lparted_by_int2 (a smallint) partition by list (a);
-create table lparted_by_int2_1 partition of lparted_by_int2 for values in (1);
-create table lparted_by_int2_16384 partition of lparted_by_int2 for values in (16384);
-explain (costs off) select * from lparted_by_int2 where a = 100_000_000_000_000;
-        QUERY PLAN        
---------------------------
- Result
-   One-Time Filter: false
-(2 rows)
-
-create table rparted_by_int2 (a smallint) partition by range (a);
-create table rparted_by_int2_1 partition of rparted_by_int2 for values from (1) to (10);
-create table rparted_by_int2_16384 partition of rparted_by_int2 for values from (10) to (16384);
--- all partitions pruned
-explain (costs off) select * from rparted_by_int2 where a > 100_000_000_000_000;
-        QUERY PLAN        
---------------------------
- Result
-   One-Time Filter: false
-(2 rows)
-
-create table rparted_by_int2_maxvalue partition of rparted_by_int2 for values from (16384) to (maxvalue);
--- all partitions but rparted_by_int2_maxvalue pruned
-explain (costs off) select * from rparted_by_int2 where a > 100_000_000_000_000;
-                      QUERY PLAN                      
-------------------------------------------------------
- Seq Scan on rparted_by_int2_maxvalue rparted_by_int2
-   Filter: (a > '100000000000000'::bigint)
-(2 rows)
-
-drop table lp, coll_pruning, rlp, mc3p, mc2p, boolpart, iboolpart, boolrangep, rp, coll_pruning_multi, like_op_noprune, lparted_by_int2, rparted_by_int2;
---
--- Test Partition pruning for HASH partitioning
---
--- Use hand-rolled hash functions and operator classes to get predictable
--- result on different machines.  See the definitions of
--- part_test_int4_ops and part_test_text_ops in test_setup.sql.
---
-create table hp (a int, b text, c int)
-  partition by hash (a part_test_int4_ops, b part_test_text_ops);
-create table hp0 partition of hp for values with (modulus 4, remainder 0);
-create table hp3 partition of hp for values with (modulus 4, remainder 3);
-create table hp1 partition of hp for values with (modulus 4, remainder 1);
-create table hp2 partition of hp for values with (modulus 4, remainder 2);
-insert into hp values (null, null, 0);
-insert into hp values (1, null, 1);
-insert into hp values (1, 'xxx', 2);
-insert into hp values (null, 'xxx', 3);
-insert into hp values (2, 'xxx', 4);
-insert into hp values (1, 'abcde', 5);
-select tableoid::regclass, * from hp order by c;
- tableoid | a |   b   | c 
-----------+---+-------+---
- hp0      |   |       | 0
- hp1      | 1 |       | 1
- hp0      | 1 | xxx   | 2
- hp2      |   | xxx   | 3
- hp3      | 2 | xxx   | 4
- hp2      | 1 | abcde | 5
-(6 rows)
-
--- partial keys won't prune, nor would non-equality conditions
-explain (costs off) select * from hp where a = 1;
-         QUERY PLAN         
-----------------------------
- Append
-   ->  Seq Scan on hp0 hp_1
-         Filter: (a = 1)
-   ->  Seq Scan on hp1 hp_2
-         Filter: (a = 1)
-   ->  Seq Scan on hp2 hp_3
-         Filter: (a = 1)
-   ->  Seq Scan on hp3 hp_4
-         Filter: (a = 1)
-(9 rows)
-
-explain (costs off) select * from hp where b = 'xxx';
-            QUERY PLAN             
------------------------------------
- Append
-   ->  Seq Scan on hp0 hp_1
-         Filter: (b = 'xxx'::text)
-   ->  Seq Scan on hp1 hp_2
-         Filter: (b = 'xxx'::text)
-   ->  Seq Scan on hp2 hp_3
-         Filter: (b = 'xxx'::text)
-   ->  Seq Scan on hp3 hp_4
-         Filter: (b = 'xxx'::text)
-(9 rows)
-
-explain (costs off) select * from hp where a is null;
-         QUERY PLAN          
------------------------------
- Append
-   ->  Seq Scan on hp0 hp_1
-         Filter: (a IS NULL)
-   ->  Seq Scan on hp1 hp_2
-         Filter: (a IS NULL)
-   ->  Seq Scan on hp2 hp_3
-         Filter: (a IS NULL)
-   ->  Seq Scan on hp3 hp_4
-         Filter: (a IS NULL)
-(9 rows)
-
-explain (costs off) select * from hp where b is null;
-         QUERY PLAN          
------------------------------
- Append
-   ->  Seq Scan on hp0 hp_1
-         Filter: (b IS NULL)
-   ->  Seq Scan on hp1 hp_2
-         Filter: (b IS NULL)
-   ->  Seq Scan on hp2 hp_3
-         Filter: (b IS NULL)
-   ->  Seq Scan on hp3 hp_4
-         Filter: (b IS NULL)
-(9 rows)
-
-explain (costs off) select * from hp where a < 1 and b = 'xxx';
-                   QUERY PLAN                    
--------------------------------------------------
- Append
-   ->  Seq Scan on hp0 hp_1
-         Filter: ((a < 1) AND (b = 'xxx'::text))
-   ->  Seq Scan on hp1 hp_2
-         Filter: ((a < 1) AND (b = 'xxx'::text))
-   ->  Seq Scan on hp2 hp_3
-         Filter: ((a < 1) AND (b = 'xxx'::text))
-   ->  Seq Scan on hp3 hp_4
-         Filter: ((a < 1) AND (b = 'xxx'::text))
-(9 rows)
-
-explain (costs off) select * from hp where a <> 1 and b = 'yyy';
-                    QUERY PLAN                    
---------------------------------------------------
- Append
-   ->  Seq Scan on hp0 hp_1
-         Filter: ((a <> 1) AND (b = 'yyy'::text))
-   ->  Seq Scan on hp1 hp_2
-         Filter: ((a <> 1) AND (b = 'yyy'::text))
-   ->  Seq Scan on hp2 hp_3
-         Filter: ((a <> 1) AND (b = 'yyy'::text))
-   ->  Seq Scan on hp3 hp_4
-         Filter: ((a <> 1) AND (b = 'yyy'::text))
-(9 rows)
-
-explain (costs off) select * from hp where a <> 1 and b <> 'xxx';
-                    QUERY PLAN                     
----------------------------------------------------
- Append
-   ->  Seq Scan on hp0 hp_1
-         Filter: ((a <> 1) AND (b <> 'xxx'::text))
-   ->  Seq Scan on hp1 hp_2
-         Filter: ((a <> 1) AND (b <> 'xxx'::text))
-   ->  Seq Scan on hp2 hp_3
-         Filter: ((a <> 1) AND (b <> 'xxx'::text))
-   ->  Seq Scan on hp3 hp_4
-         Filter: ((a <> 1) AND (b <> 'xxx'::text))
-(9 rows)
-
--- pruning should work if either a value or a IS NULL clause is provided for
--- each of the keys
-explain (costs off) select * from hp where a is null and b is null;
-               QUERY PLAN                
------------------------------------------
- Seq Scan on hp0 hp
-   Filter: ((a IS NULL) AND (b IS NULL))
-(2 rows)
-
-explain (costs off) select * from hp where a = 1 and b is null;
-             QUERY PLAN              
--------------------------------------
- Seq Scan on hp1 hp
-   Filter: ((b IS NULL) AND (a = 1))
-(2 rows)
-
-explain (costs off) select * from hp where a = 1 and b = 'xxx';
-                QUERY PLAN                 
--------------------------------------------
- Seq Scan on hp0 hp
-   Filter: ((a = 1) AND (b = 'xxx'::text))
-(2 rows)
-
-explain (costs off) select * from hp where a is null and b = 'xxx';
-                  QUERY PLAN                   
------------------------------------------------
- Seq Scan on hp2 hp
-   Filter: ((a IS NULL) AND (b = 'xxx'::text))
-(2 rows)
-
-explain (costs off) select * from hp where a = 2 and b = 'xxx';
-                QUERY PLAN                 
--------------------------------------------
- Seq Scan on hp3 hp
-   Filter: ((a = 2) AND (b = 'xxx'::text))
-(2 rows)
-
-explain (costs off) select * from hp where a = 1 and b = 'abcde';
-                 QUERY PLAN                  
----------------------------------------------
- Seq Scan on hp2 hp
-   Filter: ((a = 1) AND (b = 'abcde'::text))
-(2 rows)
-
-explain (costs off) select * from hp where (a = 1 and b = 'abcde') or (a = 2 and b = 'xxx') or (a is null and b is null);
-                                                       QUERY PLAN                                                        
--------------------------------------------------------------------------------------------------------------------------
- Append
-   ->  Seq Scan on hp0 hp_1
-         Filter: (((a = 1) AND (b = 'abcde'::text)) OR ((a = 2) AND (b = 'xxx'::text)) OR ((a IS NULL) AND (b IS NULL)))
-   ->  Seq Scan on hp2 hp_2
-         Filter: (((a = 1) AND (b = 'abcde'::text)) OR ((a = 2) AND (b = 'xxx'::text)) OR ((a IS NULL) AND (b IS NULL)))
-   ->  Seq Scan on hp3 hp_3
-         Filter: (((a = 1) AND (b = 'abcde'::text)) OR ((a = 2) AND (b = 'xxx'::text)) OR ((a IS NULL) AND (b IS NULL)))
-(7 rows)
-
--- test pruning when not all the partitions exist
-drop table hp1;
-drop table hp3;
-explain (costs off) select * from hp where a = 1 and b = 'abcde';
-                 QUERY PLAN                  
----------------------------------------------
- Seq Scan on hp2 hp
-   Filter: ((a = 1) AND (b = 'abcde'::text))
-(2 rows)
-
-explain (costs off) select * from hp where a = 1 and b = 'abcde' and
-  (c = 2 or c = 3);
-                              QUERY PLAN                              
-----------------------------------------------------------------------
- Seq Scan on hp2 hp
-   Filter: ((a = 1) AND (b = 'abcde'::text) AND ((c = 2) OR (c = 3)))
-(2 rows)
-
-drop table hp2;
-explain (costs off) select * from hp where a = 1 and b = 'abcde' and
-  (c = 2 or c = 3);
-        QUERY PLAN        
---------------------------
- Result
-   One-Time Filter: false
-(2 rows)
-
---
--- Test runtime partition pruning
---
-create table ab (a int not null, b int not null) partition by list (a);
-create table ab_a2 partition of ab for values in(2) partition by list (b);
-create table ab_a2_b1 partition of ab_a2 for values in (1);
-create table ab_a2_b2 partition of ab_a2 for values in (2);
-create table ab_a2_b3 partition of ab_a2 for values in (3);
-create table ab_a1 partition of ab for values in(1) partition by list (b);
-create table ab_a1_b1 partition of ab_a1 for values in (1);
-create table ab_a1_b2 partition of ab_a1 for values in (2);
-create table ab_a1_b3 partition of ab_a1 for values in (3);
-create table ab_a3 partition of ab for values in(3) partition by list (b);
-create table ab_a3_b1 partition of ab_a3 for values in (1);
-create table ab_a3_b2 partition of ab_a3 for values in (2);
-create table ab_a3_b3 partition of ab_a3 for values in (3);
--- Disallow index only scans as concurrent transactions may stop visibility
--- bits being set causing "Heap Fetches" to be unstable in the EXPLAIN ANALYZE
--- output.
-set enable_indexonlyscan = off;
-prepare ab_q1 (int, int, int) as
-select * from ab where a between $1 and $2 and b <= $3;
-explain (analyze, costs off, summary off, timing off) execute ab_q1 (2, 2, 3);
-                       QUERY PLAN                        
----------------------------------------------------------
- Append (actual rows=0 loops=1)
-   Subplans Removed: 6
-   ->  Seq Scan on ab_a2_b1 ab_1 (actual rows=0 loops=1)
-         Filter: ((a >= $1) AND (a <= $2) AND (b <= $3))
-   ->  Seq Scan on ab_a2_b2 ab_2 (actual rows=0 loops=1)
-         Filter: ((a >= $1) AND (a <= $2) AND (b <= $3))
-   ->  Seq Scan on ab_a2_b3 ab_3 (actual rows=0 loops=1)
-         Filter: ((a >= $1) AND (a <= $2) AND (b <= $3))
-(8 rows)
-
-explain (analyze, costs off, summary off, timing off) execute ab_q1 (1, 2, 3);
-                       QUERY PLAN                        
----------------------------------------------------------
- Append (actual rows=0 loops=1)
-   Subplans Removed: 3
-   ->  Seq Scan on ab_a1_b1 ab_1 (actual rows=0 loops=1)
-         Filter: ((a >= $1) AND (a <= $2) AND (b <= $3))
-   ->  Seq Scan on ab_a1_b2 ab_2 (actual rows=0 loops=1)
-         Filter: ((a >= $1) AND (a <= $2) AND (b <= $3))
-   ->  Seq Scan on ab_a1_b3 ab_3 (actual rows=0 loops=1)
-         Filter: ((a >= $1) AND (a <= $2) AND (b <= $3))
-   ->  Seq Scan on ab_a2_b1 ab_4 (actual rows=0 loops=1)
-         Filter: ((a >= $1) AND (a <= $2) AND (b <= $3))
-   ->  Seq Scan on ab_a2_b2 ab_5 (actual rows=0 loops=1)
-         Filter: ((a >= $1) AND (a <= $2) AND (b <= $3))
-   ->  Seq Scan on ab_a2_b3 ab_6 (actual rows=0 loops=1)
-         Filter: ((a >= $1) AND (a <= $2) AND (b <= $3))
-(14 rows)
-
-deallocate ab_q1;
--- Runtime pruning after optimizer pruning
-prepare ab_q1 (int, int) as
-select a from ab where a between $1 and $2 and b < 3;
-explain (analyze, costs off, summary off, timing off) execute ab_q1 (2, 2);
-                       QUERY PLAN                        
----------------------------------------------------------
- Append (actual rows=0 loops=1)
-   Subplans Removed: 4
-   ->  Seq Scan on ab_a2_b1 ab_1 (actual rows=0 loops=1)
-         Filter: ((a >= $1) AND (a <= $2) AND (b < 3))
-   ->  Seq Scan on ab_a2_b2 ab_2 (actual rows=0 loops=1)
-         Filter: ((a >= $1) AND (a <= $2) AND (b < 3))
-(6 rows)
-
-explain (analyze, costs off, summary off, timing off) execute ab_q1 (2, 4);
-                       QUERY PLAN                        
----------------------------------------------------------
- Append (actual rows=0 loops=1)
-   Subplans Removed: 2
-   ->  Seq Scan on ab_a2_b1 ab_1 (actual rows=0 loops=1)
-         Filter: ((a >= $1) AND (a <= $2) AND (b < 3))
-   ->  Seq Scan on ab_a2_b2 ab_2 (actual rows=0 loops=1)
-         Filter: ((a >= $1) AND (a <= $2) AND (b < 3))
-   ->  Seq Scan on ab_a3_b1 ab_3 (actual rows=0 loops=1)
-         Filter: ((a >= $1) AND (a <= $2) AND (b < 3))
-   ->  Seq Scan on ab_a3_b2 ab_4 (actual rows=0 loops=1)
-         Filter: ((a >= $1) AND (a <= $2) AND (b < 3))
-(10 rows)
-
--- Ensure a mix of PARAM_EXTERN and PARAM_EXEC Params work together at
--- different levels of partitioning.
-prepare ab_q2 (int, int) as
-select a from ab where a between $1 and $2 and b < (select 3);
-explain (analyze, costs off, summary off, timing off) execute ab_q2 (2, 2);
-                              QUERY PLAN                               
------------------------------------------------------------------------
- Append (actual rows=0 loops=1)
-   Subplans Removed: 6
-   InitPlan 1
-     ->  Result (actual rows=1 loops=1)
-   ->  Seq Scan on ab_a2_b1 ab_1 (actual rows=0 loops=1)
-         Filter: ((a >= $1) AND (a <= $2) AND (b < (InitPlan 1).col1))
-   ->  Seq Scan on ab_a2_b2 ab_2 (actual rows=0 loops=1)
-         Filter: ((a >= $1) AND (a <= $2) AND (b < (InitPlan 1).col1))
-   ->  Seq Scan on ab_a2_b3 ab_3 (never executed)
-         Filter: ((a >= $1) AND (a <= $2) AND (b < (InitPlan 1).col1))
-(10 rows)
-
--- As above, but swap the PARAM_EXEC Param to the first partition level
-prepare ab_q3 (int, int) as
-select a from ab where b between $1 and $2 and a < (select 3);
-explain (analyze, costs off, summary off, timing off) execute ab_q3 (2, 2);
-                              QUERY PLAN                               
------------------------------------------------------------------------
- Append (actual rows=0 loops=1)
-   Subplans Removed: 6
-   InitPlan 1
-     ->  Result (actual rows=1 loops=1)
-   ->  Seq Scan on ab_a1_b2 ab_1 (actual rows=0 loops=1)
-         Filter: ((b >= $1) AND (b <= $2) AND (a < (InitPlan 1).col1))
-   ->  Seq Scan on ab_a2_b2 ab_2 (actual rows=0 loops=1)
-         Filter: ((b >= $1) AND (b <= $2) AND (a < (InitPlan 1).col1))
-   ->  Seq Scan on ab_a3_b2 ab_3 (never executed)
-         Filter: ((b >= $1) AND (b <= $2) AND (a < (InitPlan 1).col1))
-(10 rows)
-
---
--- Test runtime pruning with hash partitioned tables
---
--- recreate partitions dropped above
-create table hp1 partition of hp for values with (modulus 4, remainder 1);
-create table hp2 partition of hp for values with (modulus 4, remainder 2);
-create table hp3 partition of hp for values with (modulus 4, remainder 3);
--- Ensure we correctly prune unneeded partitions when there is an IS NULL qual
-prepare hp_q1 (text) as
-select * from hp where a is null and b = $1;
-explain (costs off) execute hp_q1('xxx');
-                 QUERY PLAN                 
---------------------------------------------
- Append
-   Subplans Removed: 3
-   ->  Seq Scan on hp2 hp_1
-         Filter: ((a IS NULL) AND (b = $1))
-(4 rows)
-
-deallocate hp_q1;
-drop table hp;
--- Test a backwards Append scan
-create table list_part (a int) partition by list (a);
-create table list_part1 partition of list_part for values in (1);
-create table list_part2 partition of list_part for values in (2);
-create table list_part3 partition of list_part for values in (3);
-create table list_part4 partition of list_part for values in (4);
-insert into list_part select generate_series(1,4);
-begin;
--- Don't select an actual value out of the table as the order of the Append's
--- subnodes may not be stable.
-declare cur SCROLL CURSOR for select 1 from list_part where a > (select 1) and a < (select 4);
--- move beyond the final row
-move 3 from cur;
--- Ensure we get two rows.
-fetch backward all from cur;
- ?column? 
-----------
-        1
-        1
-(2 rows)
-
-commit;
-begin;
--- Test run-time pruning using stable functions
-create function list_part_fn(int) returns int as $$ begin return $1; end;$$ language plpgsql stable;
--- Ensure pruning works using a stable function containing no Vars
-explain (analyze, costs off, summary off, timing off) select * from list_part where a = list_part_fn(1);
-                            QUERY PLAN                            
-------------------------------------------------------------------
- Append (actual rows=1 loops=1)
-   Subplans Removed: 3
-   ->  Seq Scan on list_part1 list_part_1 (actual rows=1 loops=1)
-         Filter: (a = list_part_fn(1))
-(4 rows)
-
--- Ensure pruning does not take place when the function has a Var parameter
-explain (analyze, costs off, summary off, timing off) select * from list_part where a = list_part_fn(a);
-                            QUERY PLAN                            
-------------------------------------------------------------------
- Append (actual rows=4 loops=1)
-   ->  Seq Scan on list_part1 list_part_1 (actual rows=1 loops=1)
-         Filter: (a = list_part_fn(a))
-   ->  Seq Scan on list_part2 list_part_2 (actual rows=1 loops=1)
-         Filter: (a = list_part_fn(a))
-   ->  Seq Scan on list_part3 list_part_3 (actual rows=1 loops=1)
-         Filter: (a = list_part_fn(a))
-   ->  Seq Scan on list_part4 list_part_4 (actual rows=1 loops=1)
-         Filter: (a = list_part_fn(a))
-(9 rows)
-
--- Ensure pruning does not take place when the expression contains a Var.
-explain (analyze, costs off, summary off, timing off) select * from list_part where a = list_part_fn(1) + a;
-                            QUERY PLAN                            
-------------------------------------------------------------------
- Append (actual rows=0 loops=1)
-   ->  Seq Scan on list_part1 list_part_1 (actual rows=0 loops=1)
-         Filter: (a = (list_part_fn(1) + a))
-         Rows Removed by Filter: 1
-   ->  Seq Scan on list_part2 list_part_2 (actual rows=0 loops=1)
-         Filter: (a = (list_part_fn(1) + a))
-         Rows Removed by Filter: 1
-   ->  Seq Scan on list_part3 list_part_3 (actual rows=0 loops=1)
-         Filter: (a = (list_part_fn(1) + a))
-         Rows Removed by Filter: 1
-   ->  Seq Scan on list_part4 list_part_4 (actual rows=0 loops=1)
-         Filter: (a = (list_part_fn(1) + a))
-         Rows Removed by Filter: 1
-(13 rows)
-
-rollback;
-drop table list_part;
--- Parallel append
--- Parallel queries won't necessarily get as many workers as the planner
--- asked for.  This affects not only the "Workers Launched:" field of EXPLAIN
--- results, but also row counts and loop counts for parallel scans, Gathers,
--- and everything in between.  This function filters out the values we can't
--- rely on to be stable.
--- This removes enough info that you might wonder why bother with EXPLAIN
--- ANALYZE at all.  The answer is that we need to see '(never executed)'
--- notations because that's the only way to verify runtime pruning.
-create function explain_parallel_append(text) returns setof text
-language plpgsql as
-$$
-declare
-    ln text;
-begin
-    for ln in
-        execute format('explain (analyze, costs off, summary off, timing off) %s',
-            $1)
-    loop
-        ln := regexp_replace(ln, 'Workers Launched: \d+', 'Workers Launched: N');
-        ln := regexp_replace(ln, 'actual rows=\d+ loops=\d+', 'actual rows=N loops=N');
-        ln := regexp_replace(ln, 'Rows Removed by Filter: \d+', 'Rows Removed by Filter: N');
-        return next ln;
-    end loop;
-end;
-$$;
-prepare ab_q4 (int, int) as
-select avg(a) from ab where a between $1 and $2 and b < 4;
--- Encourage use of parallel plans
-set parallel_setup_cost = 0;
-set parallel_tuple_cost = 0;
-set min_parallel_table_scan_size = 0;
-set max_parallel_workers_per_gather = 2;
-select explain_parallel_append('execute ab_q4 (2, 2)');
-                              explain_parallel_append                               
-------------------------------------------------------------------------------------
- Finalize Aggregate (actual rows=N loops=N)
-   ->  Gather (actual rows=N loops=N)
-         Workers Planned: 2
-         Workers Launched: N
-         ->  Partial Aggregate (actual rows=N loops=N)
-               ->  Parallel Append (actual rows=N loops=N)
-                     Subplans Removed: 6
-                     ->  Parallel Seq Scan on ab_a2_b1 ab_1 (actual rows=N loops=N)
-                           Filter: ((a >= $1) AND (a <= $2) AND (b < 4))
-                     ->  Parallel Seq Scan on ab_a2_b2 ab_2 (actual rows=N loops=N)
-                           Filter: ((a >= $1) AND (a <= $2) AND (b < 4))
-                     ->  Parallel Seq Scan on ab_a2_b3 ab_3 (actual rows=N loops=N)
-                           Filter: ((a >= $1) AND (a <= $2) AND (b < 4))
-(13 rows)
-
--- Test run-time pruning with IN lists.
-prepare ab_q5 (int, int, int) as
-select avg(a) from ab where a in($1,$2,$3) and b < 4;
-select explain_parallel_append('execute ab_q5 (1, 1, 1)');
-                              explain_parallel_append                               
-------------------------------------------------------------------------------------
- Finalize Aggregate (actual rows=N loops=N)
-   ->  Gather (actual rows=N loops=N)
-         Workers Planned: 2
-         Workers Launched: N
-         ->  Partial Aggregate (actual rows=N loops=N)
-               ->  Parallel Append (actual rows=N loops=N)
-                     Subplans Removed: 6
-                     ->  Parallel Seq Scan on ab_a1_b1 ab_1 (actual rows=N loops=N)
-                           Filter: ((b < 4) AND (a = ANY (ARRAY[$1, $2, $3])))
-                     ->  Parallel Seq Scan on ab_a1_b2 ab_2 (actual rows=N loops=N)
-                           Filter: ((b < 4) AND (a = ANY (ARRAY[$1, $2, $3])))
-                     ->  Parallel Seq Scan on ab_a1_b3 ab_3 (actual rows=N loops=N)
-                           Filter: ((b < 4) AND (a = ANY (ARRAY[$1, $2, $3])))
-(13 rows)
-
-select explain_parallel_append('execute ab_q5 (2, 3, 3)');
-                              explain_parallel_append                               
-------------------------------------------------------------------------------------
- Finalize Aggregate (actual rows=N loops=N)
-   ->  Gather (actual rows=N loops=N)
-         Workers Planned: 2
-         Workers Launched: N
-         ->  Partial Aggregate (actual rows=N loops=N)
-               ->  Parallel Append (actual rows=N loops=N)
-                     Subplans Removed: 3
-                     ->  Parallel Seq Scan on ab_a2_b1 ab_1 (actual rows=N loops=N)
-                           Filter: ((b < 4) AND (a = ANY (ARRAY[$1, $2, $3])))
-                     ->  Parallel Seq Scan on ab_a2_b2 ab_2 (actual rows=N loops=N)
-                           Filter: ((b < 4) AND (a = ANY (ARRAY[$1, $2, $3])))
-                     ->  Parallel Seq Scan on ab_a2_b3 ab_3 (actual rows=N loops=N)
-                           Filter: ((b < 4) AND (a = ANY (ARRAY[$1, $2, $3])))
-                     ->  Parallel Seq Scan on ab_a3_b1 ab_4 (actual rows=N loops=N)
-                           Filter: ((b < 4) AND (a = ANY (ARRAY[$1, $2, $3])))
-                     ->  Parallel Seq Scan on ab_a3_b2 ab_5 (actual rows=N loops=N)
-                           Filter: ((b < 4) AND (a = ANY (ARRAY[$1, $2, $3])))
-                     ->  Parallel Seq Scan on ab_a3_b3 ab_6 (actual rows=N loops=N)
-                           Filter: ((b < 4) AND (a = ANY (ARRAY[$1, $2, $3])))
-(19 rows)
-
--- Try some params whose values do not belong to any partition.
-select explain_parallel_append('execute ab_q5 (33, 44, 55)');
-                  explain_parallel_append                  
------------------------------------------------------------
- Finalize Aggregate (actual rows=N loops=N)
-   ->  Gather (actual rows=N loops=N)
-         Workers Planned: 2
-         Workers Launched: N
-         ->  Partial Aggregate (actual rows=N loops=N)
-               ->  Parallel Append (actual rows=N loops=N)
-                     Subplans Removed: 9
-(7 rows)
-
--- Test Parallel Append with PARAM_EXEC Params
-select explain_parallel_append('select count(*) from ab where (a = (select 1) or a = (select 3)) and b = 2');
-                                    explain_parallel_append                                     
-------------------------------------------------------------------------------------------------
- Aggregate (actual rows=N loops=N)
-   InitPlan 1
-     ->  Result (actual rows=N loops=N)
-   InitPlan 2
-     ->  Result (actual rows=N loops=N)
-   ->  Gather (actual rows=N loops=N)
-         Workers Planned: 2
-         Workers Launched: N
-         ->  Parallel Append (actual rows=N loops=N)
-               ->  Parallel Seq Scan on ab_a1_b2 ab_1 (actual rows=N loops=N)
-                     Filter: ((b = 2) AND ((a = (InitPlan 1).col1) OR (a = (InitPlan 2).col1)))
-               ->  Parallel Seq Scan on ab_a2_b2 ab_2 (never executed)
-                     Filter: ((b = 2) AND ((a = (InitPlan 1).col1) OR (a = (InitPlan 2).col1)))
-               ->  Parallel Seq Scan on ab_a3_b2 ab_3 (actual rows=N loops=N)
-                     Filter: ((b = 2) AND ((a = (InitPlan 1).col1) OR (a = (InitPlan 2).col1)))
-(15 rows)
-
--- Test pruning during parallel nested loop query
-create table lprt_a (a int not null);
--- Insert some values we won't find in ab
-insert into lprt_a select 0 from generate_series(1,100);
--- and insert some values that we should find.
-insert into lprt_a values(1),(1);
-analyze lprt_a;
-create index ab_a2_b1_a_idx on ab_a2_b1 (a);
-create index ab_a2_b2_a_idx on ab_a2_b2 (a);
-create index ab_a2_b3_a_idx on ab_a2_b3 (a);
-create index ab_a1_b1_a_idx on ab_a1_b1 (a);
-create index ab_a1_b2_a_idx on ab_a1_b2 (a);
-create index ab_a1_b3_a_idx on ab_a1_b3 (a);
-create index ab_a3_b1_a_idx on ab_a3_b1 (a);
-create index ab_a3_b2_a_idx on ab_a3_b2 (a);
-create index ab_a3_b3_a_idx on ab_a3_b3 (a);
-set enable_hashjoin = 0;
-set enable_mergejoin = 0;
-set enable_memoize = 0;
-select explain_parallel_append('select avg(ab.a) from ab inner join lprt_a a on ab.a = a.a where a.a in(0, 0, 1)');
-                                        explain_parallel_append                                         
---------------------------------------------------------------------------------------------------------
- Finalize Aggregate (actual rows=N loops=N)
-   ->  Gather (actual rows=N loops=N)
-         Workers Planned: 1
-         Workers Launched: N
-         ->  Partial Aggregate (actual rows=N loops=N)
-               ->  Nested Loop (actual rows=N loops=N)
-                     ->  Parallel Seq Scan on lprt_a a (actual rows=N loops=N)
-                           Filter: (a = ANY ('{0,0,1}'::integer[]))
-                     ->  Append (actual rows=N loops=N)
-                           ->  Index Scan using ab_a1_b1_a_idx on ab_a1_b1 ab_1 (actual rows=N loops=N)
-                                 Index Cond: (a = a.a)
-                           ->  Index Scan using ab_a1_b2_a_idx on ab_a1_b2 ab_2 (actual rows=N loops=N)
-                                 Index Cond: (a = a.a)
-                           ->  Index Scan using ab_a1_b3_a_idx on ab_a1_b3 ab_3 (actual rows=N loops=N)
-                                 Index Cond: (a = a.a)
-                           ->  Index Scan using ab_a2_b1_a_idx on ab_a2_b1 ab_4 (never executed)
-                                 Index Cond: (a = a.a)
-                           ->  Index Scan using ab_a2_b2_a_idx on ab_a2_b2 ab_5 (never executed)
-                                 Index Cond: (a = a.a)
-                           ->  Index Scan using ab_a2_b3_a_idx on ab_a2_b3 ab_6 (never executed)
-                                 Index Cond: (a = a.a)
-                           ->  Index Scan using ab_a3_b1_a_idx on ab_a3_b1 ab_7 (never executed)
-                                 Index Cond: (a = a.a)
-                           ->  Index Scan using ab_a3_b2_a_idx on ab_a3_b2 ab_8 (never executed)
-                                 Index Cond: (a = a.a)
-                           ->  Index Scan using ab_a3_b3_a_idx on ab_a3_b3 ab_9 (never executed)
-                                 Index Cond: (a = a.a)
-(27 rows)
-
--- Ensure the same partitions are pruned when we make the nested loop
--- parameter an Expr rather than a plain Param.
-select explain_parallel_append('select avg(ab.a) from ab inner join lprt_a a on ab.a = a.a + 0 where a.a in(0, 0, 1)');
-                                        explain_parallel_append                                         
---------------------------------------------------------------------------------------------------------
- Finalize Aggregate (actual rows=N loops=N)
-   ->  Gather (actual rows=N loops=N)
-         Workers Planned: 1
-         Workers Launched: N
-         ->  Partial Aggregate (actual rows=N loops=N)
-               ->  Nested Loop (actual rows=N loops=N)
-                     ->  Parallel Seq Scan on lprt_a a (actual rows=N loops=N)
-                           Filter: (a = ANY ('{0,0,1}'::integer[]))
-                     ->  Append (actual rows=N loops=N)
-                           ->  Index Scan using ab_a1_b1_a_idx on ab_a1_b1 ab_1 (actual rows=N loops=N)
-                                 Index Cond: (a = (a.a + 0))
-                           ->  Index Scan using ab_a1_b2_a_idx on ab_a1_b2 ab_2 (actual rows=N loops=N)
-                                 Index Cond: (a = (a.a + 0))
-                           ->  Index Scan using ab_a1_b3_a_idx on ab_a1_b3 ab_3 (actual rows=N loops=N)
-                                 Index Cond: (a = (a.a + 0))
-                           ->  Index Scan using ab_a2_b1_a_idx on ab_a2_b1 ab_4 (never executed)
-                                 Index Cond: (a = (a.a + 0))
-                           ->  Index Scan using ab_a2_b2_a_idx on ab_a2_b2 ab_5 (never executed)
-                                 Index Cond: (a = (a.a + 0))
-                           ->  Index Scan using ab_a2_b3_a_idx on ab_a2_b3 ab_6 (never executed)
-                                 Index Cond: (a = (a.a + 0))
-                           ->  Index Scan using ab_a3_b1_a_idx on ab_a3_b1 ab_7 (never executed)
-                                 Index Cond: (a = (a.a + 0))
-                           ->  Index Scan using ab_a3_b2_a_idx on ab_a3_b2 ab_8 (never executed)
-                                 Index Cond: (a = (a.a + 0))
-                           ->  Index Scan using ab_a3_b3_a_idx on ab_a3_b3 ab_9 (never executed)
-                                 Index Cond: (a = (a.a + 0))
-(27 rows)
-
-insert into lprt_a values(3),(3);
-select explain_parallel_append('select avg(ab.a) from ab inner join lprt_a a on ab.a = a.a where a.a in(1, 0, 3)');
-                                        explain_parallel_append                                         
---------------------------------------------------------------------------------------------------------
- Finalize Aggregate (actual rows=N loops=N)
-   ->  Gather (actual rows=N loops=N)
-         Workers Planned: 1
-         Workers Launched: N
-         ->  Partial Aggregate (actual rows=N loops=N)
-               ->  Nested Loop (actual rows=N loops=N)
-                     ->  Parallel Seq Scan on lprt_a a (actual rows=N loops=N)
-                           Filter: (a = ANY ('{1,0,3}'::integer[]))
-                     ->  Append (actual rows=N loops=N)
-                           ->  Index Scan using ab_a1_b1_a_idx on ab_a1_b1 ab_1 (actual rows=N loops=N)
-                                 Index Cond: (a = a.a)
-                           ->  Index Scan using ab_a1_b2_a_idx on ab_a1_b2 ab_2 (actual rows=N loops=N)
-                                 Index Cond: (a = a.a)
-                           ->  Index Scan using ab_a1_b3_a_idx on ab_a1_b3 ab_3 (actual rows=N loops=N)
-                                 Index Cond: (a = a.a)
-                           ->  Index Scan using ab_a2_b1_a_idx on ab_a2_b1 ab_4 (never executed)
-                                 Index Cond: (a = a.a)
-                           ->  Index Scan using ab_a2_b2_a_idx on ab_a2_b2 ab_5 (never executed)
-                                 Index Cond: (a = a.a)
-                           ->  Index Scan using ab_a2_b3_a_idx on ab_a2_b3 ab_6 (never executed)
-                                 Index Cond: (a = a.a)
-                           ->  Index Scan using ab_a3_b1_a_idx on ab_a3_b1 ab_7 (actual rows=N loops=N)
-                                 Index Cond: (a = a.a)
-                           ->  Index Scan using ab_a3_b2_a_idx on ab_a3_b2 ab_8 (actual rows=N loops=N)
-                                 Index Cond: (a = a.a)
-                           ->  Index Scan using ab_a3_b3_a_idx on ab_a3_b3 ab_9 (actual rows=N loops=N)
-                                 Index Cond: (a = a.a)
-(27 rows)
-
-select explain_parallel_append('select avg(ab.a) from ab inner join lprt_a a on ab.a = a.a where a.a in(1, 0, 0)');
-                                        explain_parallel_append                                         
---------------------------------------------------------------------------------------------------------
- Finalize Aggregate (actual rows=N loops=N)
-   ->  Gather (actual rows=N loops=N)
-         Workers Planned: 1
-         Workers Launched: N
-         ->  Partial Aggregate (actual rows=N loops=N)
-               ->  Nested Loop (actual rows=N loops=N)
-                     ->  Parallel Seq Scan on lprt_a a (actual rows=N loops=N)
-                           Filter: (a = ANY ('{1,0,0}'::integer[]))
-                           Rows Removed by Filter: N
-                     ->  Append (actual rows=N loops=N)
-                           ->  Index Scan using ab_a1_b1_a_idx on ab_a1_b1 ab_1 (actual rows=N loops=N)
-                                 Index Cond: (a = a.a)
-                           ->  Index Scan using ab_a1_b2_a_idx on ab_a1_b2 ab_2 (actual rows=N loops=N)
-                                 Index Cond: (a = a.a)
-                           ->  Index Scan using ab_a1_b3_a_idx on ab_a1_b3 ab_3 (actual rows=N loops=N)
-                                 Index Cond: (a = a.a)
-                           ->  Index Scan using ab_a2_b1_a_idx on ab_a2_b1 ab_4 (never executed)
-                                 Index Cond: (a = a.a)
-                           ->  Index Scan using ab_a2_b2_a_idx on ab_a2_b2 ab_5 (never executed)
-                                 Index Cond: (a = a.a)
-                           ->  Index Scan using ab_a2_b3_a_idx on ab_a2_b3 ab_6 (never executed)
-                                 Index Cond: (a = a.a)
-                           ->  Index Scan using ab_a3_b1_a_idx on ab_a3_b1 ab_7 (never executed)
-                                 Index Cond: (a = a.a)
-                           ->  Index Scan using ab_a3_b2_a_idx on ab_a3_b2 ab_8 (never executed)
-                                 Index Cond: (a = a.a)
-                           ->  Index Scan using ab_a3_b3_a_idx on ab_a3_b3 ab_9 (never executed)
-                                 Index Cond: (a = a.a)
-(28 rows)
-
-delete from lprt_a where a = 1;
-select explain_parallel_append('select avg(ab.a) from ab inner join lprt_a a on ab.a = a.a where a.a in(1, 0, 0)');
-                                     explain_parallel_append                                     
--------------------------------------------------------------------------------------------------
- Finalize Aggregate (actual rows=N loops=N)
-   ->  Gather (actual rows=N loops=N)
-         Workers Planned: 1
-         Workers Launched: N
-         ->  Partial Aggregate (actual rows=N loops=N)
-               ->  Nested Loop (actual rows=N loops=N)
-                     ->  Parallel Seq Scan on lprt_a a (actual rows=N loops=N)
-                           Filter: (a = ANY ('{1,0,0}'::integer[]))
-                           Rows Removed by Filter: N
-                     ->  Append (actual rows=N loops=N)
-                           ->  Index Scan using ab_a1_b1_a_idx on ab_a1_b1 ab_1 (never executed)
-                                 Index Cond: (a = a.a)
-                           ->  Index Scan using ab_a1_b2_a_idx on ab_a1_b2 ab_2 (never executed)
-                                 Index Cond: (a = a.a)
-                           ->  Index Scan using ab_a1_b3_a_idx on ab_a1_b3 ab_3 (never executed)
-                                 Index Cond: (a = a.a)
-                           ->  Index Scan using ab_a2_b1_a_idx on ab_a2_b1 ab_4 (never executed)
-                                 Index Cond: (a = a.a)
-                           ->  Index Scan using ab_a2_b2_a_idx on ab_a2_b2 ab_5 (never executed)
-                                 Index Cond: (a = a.a)
-                           ->  Index Scan using ab_a2_b3_a_idx on ab_a2_b3 ab_6 (never executed)
-                                 Index Cond: (a = a.a)
-                           ->  Index Scan using ab_a3_b1_a_idx on ab_a3_b1 ab_7 (never executed)
-                                 Index Cond: (a = a.a)
-                           ->  Index Scan using ab_a3_b2_a_idx on ab_a3_b2 ab_8 (never executed)
-                                 Index Cond: (a = a.a)
-                           ->  Index Scan using ab_a3_b3_a_idx on ab_a3_b3 ab_9 (never executed)
-                                 Index Cond: (a = a.a)
-(28 rows)
-
-reset enable_hashjoin;
-reset enable_mergejoin;
-reset enable_memoize;
-reset parallel_setup_cost;
-reset parallel_tuple_cost;
-reset min_parallel_table_scan_size;
-reset max_parallel_workers_per_gather;
--- Test run-time partition pruning with an initplan
-explain (analyze, costs off, summary off, timing off)
-select * from ab where a = (select max(a) from lprt_a) and b = (select max(a)-1 from lprt_a);
-                               QUERY PLAN                                
--------------------------------------------------------------------------
- Append (actual rows=0 loops=1)
-   InitPlan 1
-     ->  Aggregate (actual rows=1 loops=1)
-           ->  Seq Scan on lprt_a (actual rows=102 loops=1)
-   InitPlan 2
-     ->  Aggregate (actual rows=1 loops=1)
-           ->  Seq Scan on lprt_a lprt_a_1 (actual rows=102 loops=1)
-   ->  Bitmap Heap Scan on ab_a1_b1 ab_1 (never executed)
-         Recheck Cond: (a = (InitPlan 1).col1)
-         Filter: (b = (InitPlan 2).col1)
-         ->  Bitmap Index Scan on ab_a1_b1_a_idx (never executed)
-               Index Cond: (a = (InitPlan 1).col1)
-   ->  Bitmap Heap Scan on ab_a1_b2 ab_2 (never executed)
-         Recheck Cond: (a = (InitPlan 1).col1)
-         Filter: (b = (InitPlan 2).col1)
-         ->  Bitmap Index Scan on ab_a1_b2_a_idx (never executed)
-               Index Cond: (a = (InitPlan 1).col1)
-   ->  Bitmap Heap Scan on ab_a1_b3 ab_3 (never executed)
-         Recheck Cond: (a = (InitPlan 1).col1)
-         Filter: (b = (InitPlan 2).col1)
-         ->  Bitmap Index Scan on ab_a1_b3_a_idx (never executed)
-               Index Cond: (a = (InitPlan 1).col1)
-   ->  Bitmap Heap Scan on ab_a2_b1 ab_4 (never executed)
-         Recheck Cond: (a = (InitPlan 1).col1)
-         Filter: (b = (InitPlan 2).col1)
-         ->  Bitmap Index Scan on ab_a2_b1_a_idx (never executed)
-               Index Cond: (a = (InitPlan 1).col1)
-   ->  Bitmap Heap Scan on ab_a2_b2 ab_5 (never executed)
-         Recheck Cond: (a = (InitPlan 1).col1)
-         Filter: (b = (InitPlan 2).col1)
-         ->  Bitmap Index Scan on ab_a2_b2_a_idx (never executed)
-               Index Cond: (a = (InitPlan 1).col1)
-   ->  Bitmap Heap Scan on ab_a2_b3 ab_6 (never executed)
-         Recheck Cond: (a = (InitPlan 1).col1)
-         Filter: (b = (InitPlan 2).col1)
-         ->  Bitmap Index Scan on ab_a2_b3_a_idx (never executed)
-               Index Cond: (a = (InitPlan 1).col1)
-   ->  Bitmap Heap Scan on ab_a3_b1 ab_7 (never executed)
-         Recheck Cond: (a = (InitPlan 1).col1)
-         Filter: (b = (InitPlan 2).col1)
-         ->  Bitmap Index Scan on ab_a3_b1_a_idx (never executed)
-               Index Cond: (a = (InitPlan 1).col1)
-   ->  Bitmap Heap Scan on ab_a3_b2 ab_8 (actual rows=0 loops=1)
-         Recheck Cond: (a = (InitPlan 1).col1)
-         Filter: (b = (InitPlan 2).col1)
-         ->  Bitmap Index Scan on ab_a3_b2_a_idx (actual rows=0 loops=1)
-               Index Cond: (a = (InitPlan 1).col1)
-   ->  Bitmap Heap Scan on ab_a3_b3 ab_9 (never executed)
-         Recheck Cond: (a = (InitPlan 1).col1)
-         Filter: (b = (InitPlan 2).col1)
-         ->  Bitmap Index Scan on ab_a3_b3_a_idx (never executed)
-               Index Cond: (a = (InitPlan 1).col1)
-(52 rows)
-
--- Test run-time partition pruning with UNION ALL parents
-explain (analyze, costs off, summary off, timing off)
-select * from (select * from ab where a = 1 union all select * from ab) ab where b = (select 1);
-                                  QUERY PLAN                                   
--------------------------------------------------------------------------------
- Append (actual rows=0 loops=1)
-   InitPlan 1
-     ->  Result (actual rows=1 loops=1)
-   ->  Append (actual rows=0 loops=1)
-         ->  Bitmap Heap Scan on ab_a1_b1 ab_11 (actual rows=0 loops=1)
-               Recheck Cond: (a = 1)
-               Filter: (b = (InitPlan 1).col1)
-               ->  Bitmap Index Scan on ab_a1_b1_a_idx (actual rows=0 loops=1)
-                     Index Cond: (a = 1)
-         ->  Bitmap Heap Scan on ab_a1_b2 ab_12 (never executed)
-               Recheck Cond: (a = 1)
-               Filter: (b = (InitPlan 1).col1)
-               ->  Bitmap Index Scan on ab_a1_b2_a_idx (never executed)
-                     Index Cond: (a = 1)
-         ->  Bitmap Heap Scan on ab_a1_b3 ab_13 (never executed)
-               Recheck Cond: (a = 1)
-               Filter: (b = (InitPlan 1).col1)
-               ->  Bitmap Index Scan on ab_a1_b3_a_idx (never executed)
-                     Index Cond: (a = 1)
-   ->  Seq Scan on ab_a1_b1 ab_1 (actual rows=0 loops=1)
-         Filter: (b = (InitPlan 1).col1)
-   ->  Seq Scan on ab_a1_b2 ab_2 (never executed)
-         Filter: (b = (InitPlan 1).col1)
-   ->  Seq Scan on ab_a1_b3 ab_3 (never executed)
-         Filter: (b = (InitPlan 1).col1)
-   ->  Seq Scan on ab_a2_b1 ab_4 (actual rows=0 loops=1)
-         Filter: (b = (InitPlan 1).col1)
-   ->  Seq Scan on ab_a2_b2 ab_5 (never executed)
-         Filter: (b = (InitPlan 1).col1)
-   ->  Seq Scan on ab_a2_b3 ab_6 (never executed)
-         Filter: (b = (InitPlan 1).col1)
-   ->  Seq Scan on ab_a3_b1 ab_7 (actual rows=0 loops=1)
-         Filter: (b = (InitPlan 1).col1)
-   ->  Seq Scan on ab_a3_b2 ab_8 (never executed)
-         Filter: (b = (InitPlan 1).col1)
-   ->  Seq Scan on ab_a3_b3 ab_9 (never executed)
-         Filter: (b = (InitPlan 1).col1)
-(37 rows)
-
--- A case containing a UNION ALL with a non-partitioned child.
-explain (analyze, costs off, summary off, timing off)
-select * from (select * from ab where a = 1 union all (values(10,5)) union all select * from ab) ab where b = (select 1);
-                                  QUERY PLAN                                   
--------------------------------------------------------------------------------
- Append (actual rows=0 loops=1)
-   InitPlan 1
-     ->  Result (actual rows=1 loops=1)
-   ->  Append (actual rows=0 loops=1)
-         ->  Bitmap Heap Scan on ab_a1_b1 ab_11 (actual rows=0 loops=1)
-               Recheck Cond: (a = 1)
-               Filter: (b = (InitPlan 1).col1)
-               ->  Bitmap Index Scan on ab_a1_b1_a_idx (actual rows=0 loops=1)
-                     Index Cond: (a = 1)
-         ->  Bitmap Heap Scan on ab_a1_b2 ab_12 (never executed)
-               Recheck Cond: (a = 1)
-               Filter: (b = (InitPlan 1).col1)
-               ->  Bitmap Index Scan on ab_a1_b2_a_idx (never executed)
-                     Index Cond: (a = 1)
-         ->  Bitmap Heap Scan on ab_a1_b3 ab_13 (never executed)
-               Recheck Cond: (a = 1)
-               Filter: (b = (InitPlan 1).col1)
-               ->  Bitmap Index Scan on ab_a1_b3_a_idx (never executed)
-                     Index Cond: (a = 1)
-   ->  Result (actual rows=0 loops=1)
-         One-Time Filter: (5 = (InitPlan 1).col1)
-   ->  Seq Scan on ab_a1_b1 ab_1 (actual rows=0 loops=1)
-         Filter: (b = (InitPlan 1).col1)
-   ->  Seq Scan on ab_a1_b2 ab_2 (never executed)
-         Filter: (b = (InitPlan 1).col1)
-   ->  Seq Scan on ab_a1_b3 ab_3 (never executed)
-         Filter: (b = (InitPlan 1).col1)
-   ->  Seq Scan on ab_a2_b1 ab_4 (actual rows=0 loops=1)
-         Filter: (b = (InitPlan 1).col1)
-   ->  Seq Scan on ab_a2_b2 ab_5 (never executed)
-         Filter: (b = (InitPlan 1).col1)
-   ->  Seq Scan on ab_a2_b3 ab_6 (never executed)
-         Filter: (b = (InitPlan 1).col1)
-   ->  Seq Scan on ab_a3_b1 ab_7 (actual rows=0 loops=1)
-         Filter: (b = (InitPlan 1).col1)
-   ->  Seq Scan on ab_a3_b2 ab_8 (never executed)
-         Filter: (b = (InitPlan 1).col1)
-   ->  Seq Scan on ab_a3_b3 ab_9 (never executed)
-         Filter: (b = (InitPlan 1).col1)
-(39 rows)
-
--- Another UNION ALL test, but containing a mix of exec init and exec run-time pruning.
-create table xy_1 (x int, y int);
-insert into xy_1 values(100,-10);
-set enable_bitmapscan = 0;
-set enable_indexscan = 0;
-prepare ab_q6 as
-select * from (
-	select tableoid::regclass,a,b from ab
-union all
-	select tableoid::regclass,x,y from xy_1
-union all
-	select tableoid::regclass,a,b from ab
-) ab where a = $1 and b = (select -10);
--- Ensure the xy_1 subplan is not pruned.
-explain (analyze, costs off, summary off, timing off) execute ab_q6(1);
-                       QUERY PLAN                       
---------------------------------------------------------
- Append (actual rows=0 loops=1)
-   Subplans Removed: 12
-   InitPlan 1
-     ->  Result (actual rows=1 loops=1)
-   ->  Seq Scan on ab_a1_b1 ab_1 (never executed)
-         Filter: ((a = $1) AND (b = (InitPlan 1).col1))
-   ->  Seq Scan on ab_a1_b2 ab_2 (never executed)
-         Filter: ((a = $1) AND (b = (InitPlan 1).col1))
-   ->  Seq Scan on ab_a1_b3 ab_3 (never executed)
-         Filter: ((a = $1) AND (b = (InitPlan 1).col1))
-   ->  Seq Scan on xy_1 (actual rows=0 loops=1)
-         Filter: ((x = $1) AND (y = (InitPlan 1).col1))
-         Rows Removed by Filter: 1
-   ->  Seq Scan on ab_a1_b1 ab_4 (never executed)
-         Filter: ((a = $1) AND (b = (InitPlan 1).col1))
-   ->  Seq Scan on ab_a1_b2 ab_5 (never executed)
-         Filter: ((a = $1) AND (b = (InitPlan 1).col1))
-   ->  Seq Scan on ab_a1_b3 ab_6 (never executed)
-         Filter: ((a = $1) AND (b = (InitPlan 1).col1))
-(19 rows)
-
--- Ensure we see just the xy_1 row.
-execute ab_q6(100);
- tableoid |  a  |  b  
-----------+-----+-----
- xy_1     | 100 | -10
-(1 row)
-
-reset enable_bitmapscan;
-reset enable_indexscan;
-deallocate ab_q1;
-deallocate ab_q2;
-deallocate ab_q3;
-deallocate ab_q4;
-deallocate ab_q5;
-deallocate ab_q6;
--- UPDATE on a partition subtree has been seen to have problems.
-insert into ab values (1,2);
-select explain_analyze('
-update ab_a1 set b = 3 from ab where ab.a = 1 and ab.a = ab_a1.a;');
-                                      explain_analyze                                      
--------------------------------------------------------------------------------------------
- Update on ab_a1 (actual rows=0 loops=1)
-   Update on ab_a1_b1 ab_a1_1
-   Update on ab_a1_b2 ab_a1_2
-   Update on ab_a1_b3 ab_a1_3
-   ->  Nested Loop (actual rows=1 loops=1)
-         ->  Append (actual rows=1 loops=1)
-               ->  Bitmap Heap Scan on ab_a1_b1 ab_a1_1 (actual rows=0 loops=1)
-                     Recheck Cond: (a = 1)
-                     ->  Bitmap Index Scan on ab_a1_b1_a_idx (actual rows=0 loops=1)
-                           Index Cond: (a = 1)
-               ->  Bitmap Heap Scan on ab_a1_b2 ab_a1_2 (actual rows=1 loops=1)
-                     Recheck Cond: (a = 1)
-                     Heap Blocks: exact=1
-                     ->  Bitmap Index Scan on ab_a1_b2_a_idx (actual rows=1 loops=1)
-                           Index Cond: (a = 1)
-               ->  Bitmap Heap Scan on ab_a1_b3 ab_a1_3 (actual rows=0 loops=1)
-                     Recheck Cond: (a = 1)
-                     Heap Blocks: exact=1
-                     ->  Bitmap Index Scan on ab_a1_b3_a_idx (actual rows=1 loops=1)
-                           Index Cond: (a = 1)
-         ->  Materialize (actual rows=1 loops=1)
-               Storage: Memory  Maximum Storage: NkB
-               ->  Append (actual rows=1 loops=1)
-                     ->  Bitmap Heap Scan on ab_a1_b1 ab_1 (actual rows=0 loops=1)
-                           Recheck Cond: (a = 1)
-                           ->  Bitmap Index Scan on ab_a1_b1_a_idx (actual rows=0 loops=1)
-                                 Index Cond: (a = 1)
-                     ->  Bitmap Heap Scan on ab_a1_b2 ab_2 (actual rows=1 loops=1)
-                           Recheck Cond: (a = 1)
-                           Heap Blocks: exact=1
-                           ->  Bitmap Index Scan on ab_a1_b2_a_idx (actual rows=1 loops=1)
-                                 Index Cond: (a = 1)
-                     ->  Bitmap Heap Scan on ab_a1_b3 ab_3 (actual rows=0 loops=1)
-                           Recheck Cond: (a = 1)
-                           Heap Blocks: exact=1
-                           ->  Bitmap Index Scan on ab_a1_b3_a_idx (actual rows=1 loops=1)
-                                 Index Cond: (a = 1)
-(37 rows)
-
-table ab;
- a | b 
----+---
- 1 | 3
-(1 row)
-
--- Test UPDATE where source relation has run-time pruning enabled
-truncate ab;
-insert into ab values (1, 1), (1, 2), (1, 3), (2, 1);
-select explain_analyze('
-update ab_a1 set b = 3 from ab_a2 where ab_a2.b = (select 1);');
-                               explain_analyze                                
-------------------------------------------------------------------------------
- Update on ab_a1 (actual rows=0 loops=1)
-   Update on ab_a1_b1 ab_a1_1
-   Update on ab_a1_b2 ab_a1_2
-   Update on ab_a1_b3 ab_a1_3
-   InitPlan 1
-     ->  Result (actual rows=1 loops=1)
-   ->  Nested Loop (actual rows=3 loops=1)
-         ->  Append (actual rows=3 loops=1)
-               ->  Seq Scan on ab_a1_b1 ab_a1_1 (actual rows=1 loops=1)
-               ->  Seq Scan on ab_a1_b2 ab_a1_2 (actual rows=1 loops=1)
-               ->  Seq Scan on ab_a1_b3 ab_a1_3 (actual rows=1 loops=1)
-         ->  Materialize (actual rows=1 loops=3)
-               Storage: Memory  Maximum Storage: NkB
-               ->  Append (actual rows=1 loops=1)
-                     ->  Seq Scan on ab_a2_b1 ab_a2_1 (actual rows=1 loops=1)
-                           Filter: (b = (InitPlan 1).col1)
-                     ->  Seq Scan on ab_a2_b2 ab_a2_2 (never executed)
-                           Filter: (b = (InitPlan 1).col1)
-                     ->  Seq Scan on ab_a2_b3 ab_a2_3 (never executed)
-                           Filter: (b = (InitPlan 1).col1)
-(20 rows)
-
-select tableoid::regclass, * from ab;
- tableoid | a | b 
-----------+---+---
- ab_a1_b3 | 1 | 3
- ab_a1_b3 | 1 | 3
- ab_a1_b3 | 1 | 3
- ab_a2_b1 | 2 | 1
-(4 rows)
-
-drop table ab, lprt_a;
--- Join
-create table tbl1(col1 int);
-insert into tbl1 values (501), (505);
--- Basic table
-create table tprt (col1 int) partition by range (col1);
-create table tprt_1 partition of tprt for values from (1) to (501);
-create table tprt_2 partition of tprt for values from (501) to (1001);
-create table tprt_3 partition of tprt for values from (1001) to (2001);
-create table tprt_4 partition of tprt for values from (2001) to (3001);
-create table tprt_5 partition of tprt for values from (3001) to (4001);
-create table tprt_6 partition of tprt for values from (4001) to (5001);
-create index tprt1_idx on tprt_1 (col1);
-create index tprt2_idx on tprt_2 (col1);
-create index tprt3_idx on tprt_3 (col1);
-create index tprt4_idx on tprt_4 (col1);
-create index tprt5_idx on tprt_5 (col1);
-create index tprt6_idx on tprt_6 (col1);
-insert into tprt values (10), (20), (501), (502), (505), (1001), (4500);
-set enable_hashjoin = off;
-set enable_mergejoin = off;
-explain (analyze, costs off, summary off, timing off)
-select * from tbl1 join tprt on tbl1.col1 > tprt.col1;
-                                QUERY PLAN                                
---------------------------------------------------------------------------
- Nested Loop (actual rows=6 loops=1)
-   ->  Seq Scan on tbl1 (actual rows=2 loops=1)
-   ->  Append (actual rows=3 loops=2)
-         ->  Index Scan using tprt1_idx on tprt_1 (actual rows=2 loops=2)
-               Index Cond: (col1 < tbl1.col1)
-         ->  Index Scan using tprt2_idx on tprt_2 (actual rows=2 loops=1)
-               Index Cond: (col1 < tbl1.col1)
-         ->  Index Scan using tprt3_idx on tprt_3 (never executed)
-               Index Cond: (col1 < tbl1.col1)
-         ->  Index Scan using tprt4_idx on tprt_4 (never executed)
-               Index Cond: (col1 < tbl1.col1)
-         ->  Index Scan using tprt5_idx on tprt_5 (never executed)
-               Index Cond: (col1 < tbl1.col1)
-         ->  Index Scan using tprt6_idx on tprt_6 (never executed)
-               Index Cond: (col1 < tbl1.col1)
-(15 rows)
-
-explain (analyze, costs off, summary off, timing off)
-select * from tbl1 join tprt on tbl1.col1 = tprt.col1;
-                                QUERY PLAN                                
---------------------------------------------------------------------------
- Nested Loop (actual rows=2 loops=1)
-   ->  Seq Scan on tbl1 (actual rows=2 loops=1)
-   ->  Append (actual rows=1 loops=2)
-         ->  Index Scan using tprt1_idx on tprt_1 (never executed)
-               Index Cond: (col1 = tbl1.col1)
-         ->  Index Scan using tprt2_idx on tprt_2 (actual rows=1 loops=2)
-               Index Cond: (col1 = tbl1.col1)
-         ->  Index Scan using tprt3_idx on tprt_3 (never executed)
-               Index Cond: (col1 = tbl1.col1)
-         ->  Index Scan using tprt4_idx on tprt_4 (never executed)
-               Index Cond: (col1 = tbl1.col1)
-         ->  Index Scan using tprt5_idx on tprt_5 (never executed)
-               Index Cond: (col1 = tbl1.col1)
-         ->  Index Scan using tprt6_idx on tprt_6 (never executed)
-               Index Cond: (col1 = tbl1.col1)
-(15 rows)
-
-select tbl1.col1, tprt.col1 from tbl1
-inner join tprt on tbl1.col1 > tprt.col1
-order by tbl1.col1, tprt.col1;
- col1 | col1 
-------+------
-  501 |   10
-  501 |   20
-  505 |   10
-  505 |   20
-  505 |  501
-  505 |  502
-(6 rows)
-
-select tbl1.col1, tprt.col1 from tbl1
-inner join tprt on tbl1.col1 = tprt.col1
-order by tbl1.col1, tprt.col1;
- col1 | col1 
-------+------
-  501 |  501
-  505 |  505
-(2 rows)
-
--- Multiple partitions
-insert into tbl1 values (1001), (1010), (1011);
-explain (analyze, costs off, summary off, timing off)
-select * from tbl1 inner join tprt on tbl1.col1 > tprt.col1;
-                                QUERY PLAN                                
---------------------------------------------------------------------------
- Nested Loop (actual rows=23 loops=1)
-   ->  Seq Scan on tbl1 (actual rows=5 loops=1)
-   ->  Append (actual rows=5 loops=5)
-         ->  Index Scan using tprt1_idx on tprt_1 (actual rows=2 loops=5)
-               Index Cond: (col1 < tbl1.col1)
-         ->  Index Scan using tprt2_idx on tprt_2 (actual rows=3 loops=4)
-               Index Cond: (col1 < tbl1.col1)
-         ->  Index Scan using tprt3_idx on tprt_3 (actual rows=1 loops=2)
-               Index Cond: (col1 < tbl1.col1)
-         ->  Index Scan using tprt4_idx on tprt_4 (never executed)
-               Index Cond: (col1 < tbl1.col1)
-         ->  Index Scan using tprt5_idx on tprt_5 (never executed)
-               Index Cond: (col1 < tbl1.col1)
-         ->  Index Scan using tprt6_idx on tprt_6 (never executed)
-               Index Cond: (col1 < tbl1.col1)
-(15 rows)
-
-explain (analyze, costs off, summary off, timing off)
-select * from tbl1 inner join tprt on tbl1.col1 = tprt.col1;
-                                QUERY PLAN                                
---------------------------------------------------------------------------
- Nested Loop (actual rows=3 loops=1)
-   ->  Seq Scan on tbl1 (actual rows=5 loops=1)
-   ->  Append (actual rows=1 loops=5)
-         ->  Index Scan using tprt1_idx on tprt_1 (never executed)
-               Index Cond: (col1 = tbl1.col1)
-         ->  Index Scan using tprt2_idx on tprt_2 (actual rows=1 loops=2)
-               Index Cond: (col1 = tbl1.col1)
-         ->  Index Scan using tprt3_idx on tprt_3 (actual rows=0 loops=3)
-               Index Cond: (col1 = tbl1.col1)
-         ->  Index Scan using tprt4_idx on tprt_4 (never executed)
-               Index Cond: (col1 = tbl1.col1)
-         ->  Index Scan using tprt5_idx on tprt_5 (never executed)
-               Index Cond: (col1 = tbl1.col1)
-         ->  Index Scan using tprt6_idx on tprt_6 (never executed)
-               Index Cond: (col1 = tbl1.col1)
-(15 rows)
-
-select tbl1.col1, tprt.col1 from tbl1
-inner join tprt on tbl1.col1 > tprt.col1
-order by tbl1.col1, tprt.col1;
- col1 | col1 
-------+------
-  501 |   10
-  501 |   20
-  505 |   10
-  505 |   20
-  505 |  501
-  505 |  502
- 1001 |   10
- 1001 |   20
- 1001 |  501
- 1001 |  502
- 1001 |  505
- 1010 |   10
- 1010 |   20
- 1010 |  501
- 1010 |  502
- 1010 |  505
- 1010 | 1001
- 1011 |   10
- 1011 |   20
- 1011 |  501
- 1011 |  502
- 1011 |  505
- 1011 | 1001
-(23 rows)
-
-select tbl1.col1, tprt.col1 from tbl1
-inner join tprt on tbl1.col1 = tprt.col1
-order by tbl1.col1, tprt.col1;
- col1 | col1 
-------+------
-  501 |  501
-  505 |  505
- 1001 | 1001
-(3 rows)
-
--- Last partition
-delete from tbl1;
-insert into tbl1 values (4400);
-explain (analyze, costs off, summary off, timing off)
-select * from tbl1 join tprt on tbl1.col1 < tprt.col1;
-                                QUERY PLAN                                
---------------------------------------------------------------------------
- Nested Loop (actual rows=1 loops=1)
-   ->  Seq Scan on tbl1 (actual rows=1 loops=1)
-   ->  Append (actual rows=1 loops=1)
-         ->  Index Scan using tprt1_idx on tprt_1 (never executed)
-               Index Cond: (col1 > tbl1.col1)
-         ->  Index Scan using tprt2_idx on tprt_2 (never executed)
-               Index Cond: (col1 > tbl1.col1)
-         ->  Index Scan using tprt3_idx on tprt_3 (never executed)
-               Index Cond: (col1 > tbl1.col1)
-         ->  Index Scan using tprt4_idx on tprt_4 (never executed)
-               Index Cond: (col1 > tbl1.col1)
-         ->  Index Scan using tprt5_idx on tprt_5 (never executed)
-               Index Cond: (col1 > tbl1.col1)
-         ->  Index Scan using tprt6_idx on tprt_6 (actual rows=1 loops=1)
-               Index Cond: (col1 > tbl1.col1)
-(15 rows)
-
-select tbl1.col1, tprt.col1 from tbl1
-inner join tprt on tbl1.col1 < tprt.col1
-order by tbl1.col1, tprt.col1;
- col1 | col1 
-------+------
- 4400 | 4500
-(1 row)
-
--- No matching partition
-delete from tbl1;
-insert into tbl1 values (10000);
-explain (analyze, costs off, summary off, timing off)
-select * from tbl1 join tprt on tbl1.col1 = tprt.col1;
-                            QUERY PLAN                             
--------------------------------------------------------------------
- Nested Loop (actual rows=0 loops=1)
-   ->  Seq Scan on tbl1 (actual rows=1 loops=1)
-   ->  Append (actual rows=0 loops=1)
-         ->  Index Scan using tprt1_idx on tprt_1 (never executed)
-               Index Cond: (col1 = tbl1.col1)
-         ->  Index Scan using tprt2_idx on tprt_2 (never executed)
-               Index Cond: (col1 = tbl1.col1)
-         ->  Index Scan using tprt3_idx on tprt_3 (never executed)
-               Index Cond: (col1 = tbl1.col1)
-         ->  Index Scan using tprt4_idx on tprt_4 (never executed)
-               Index Cond: (col1 = tbl1.col1)
-         ->  Index Scan using tprt5_idx on tprt_5 (never executed)
-               Index Cond: (col1 = tbl1.col1)
-         ->  Index Scan using tprt6_idx on tprt_6 (never executed)
-               Index Cond: (col1 = tbl1.col1)
-(15 rows)
-
-select tbl1.col1, tprt.col1 from tbl1
-inner join tprt on tbl1.col1 = tprt.col1
-order by tbl1.col1, tprt.col1;
- col1 | col1 
-------+------
-(0 rows)
-
-drop table tbl1, tprt;
--- Test with columns defined in varying orders between each level
-create table part_abc (a int not null, b int not null, c int not null) partition by list (a);
-create table part_bac (b int not null, a int not null, c int not null) partition by list (b);
-create table part_cab (c int not null, a int not null, b int not null) partition by list (c);
-create table part_abc_p1 (a int not null, b int not null, c int not null);
-alter table part_abc attach partition part_bac for values in(1);
-alter table part_bac attach partition part_cab for values in(2);
-alter table part_cab attach partition part_abc_p1 for values in(3);
-prepare part_abc_q1 (int, int, int) as
-select * from part_abc where a = $1 and b = $2 and c = $3;
--- Single partition should be scanned.
-explain (analyze, costs off, summary off, timing off) execute part_abc_q1 (1, 2, 3);
-                        QUERY PLAN                        
-----------------------------------------------------------
- Seq Scan on part_abc_p1 part_abc (actual rows=0 loops=1)
-   Filter: ((a = $1) AND (b = $2) AND (c = $3))
-(2 rows)
-
-deallocate part_abc_q1;
-drop table part_abc;
--- Ensure that an Append node properly handles a sub-partitioned table
--- matching without any of its leaf partitions matching the clause.
-create table listp (a int, b int) partition by list (a);
-create table listp_1 partition of listp for values in(1) partition by list (b);
-create table listp_1_1 partition of listp_1 for values in(1);
-create table listp_2 partition of listp for values in(2) partition by list (b);
-create table listp_2_1 partition of listp_2 for values in(2);
-select * from listp where b = 1;
- a | b 
----+---
-(0 rows)
-
--- Ensure that an Append node properly can handle selection of all first level
--- partitions before finally detecting the correct set of 2nd level partitions
--- which match the given parameter.
-prepare q1 (int,int) as select * from listp where b in ($1,$2);
-explain (analyze, costs off, summary off, timing off)  execute q1 (1,1);
-                         QUERY PLAN                          
--------------------------------------------------------------
- Append (actual rows=0 loops=1)
-   Subplans Removed: 1
-   ->  Seq Scan on listp_1_1 listp_1 (actual rows=0 loops=1)
-         Filter: (b = ANY (ARRAY[$1, $2]))
-(4 rows)
-
-explain (analyze, costs off, summary off, timing off)  execute q1 (2,2);
-                         QUERY PLAN                          
--------------------------------------------------------------
- Append (actual rows=0 loops=1)
-   Subplans Removed: 1
-   ->  Seq Scan on listp_2_1 listp_1 (actual rows=0 loops=1)
-         Filter: (b = ANY (ARRAY[$1, $2]))
-(4 rows)
-
--- Try with no matching partitions.
-explain (analyze, costs off, summary off, timing off)  execute q1 (0,0);
-           QUERY PLAN           
---------------------------------
- Append (actual rows=0 loops=1)
-   Subplans Removed: 2
-(2 rows)
-
-deallocate q1;
--- Test more complex cases where a not-equal condition further eliminates partitions.
-prepare q1 (int,int,int,int) as select * from listp where b in($1,$2) and $3 <> b and $4 <> b;
--- Both partitions allowed by IN clause, but one disallowed by <> clause
-explain (analyze, costs off, summary off, timing off)  execute q1 (1,2,2,0);
-                               QUERY PLAN                                
--------------------------------------------------------------------------
- Append (actual rows=0 loops=1)
-   Subplans Removed: 1
-   ->  Seq Scan on listp_1_1 listp_1 (actual rows=0 loops=1)
-         Filter: ((b = ANY (ARRAY[$1, $2])) AND ($3 <> b) AND ($4 <> b))
-(4 rows)
-
--- Both partitions allowed by IN clause, then both excluded again by <> clauses.
-explain (analyze, costs off, summary off, timing off)  execute q1 (1,2,2,1);
-           QUERY PLAN           
---------------------------------
- Append (actual rows=0 loops=1)
-   Subplans Removed: 2
-(2 rows)
-
--- Ensure Params that evaluate to NULL properly prune away all partitions
-explain (analyze, costs off, summary off, timing off)
-select * from listp where a = (select null::int);
-                      QUERY PLAN                      
-------------------------------------------------------
- Append (actual rows=0 loops=1)
-   InitPlan 1
-     ->  Result (actual rows=1 loops=1)
-   ->  Seq Scan on listp_1_1 listp_1 (never executed)
-         Filter: (a = (InitPlan 1).col1)
-   ->  Seq Scan on listp_2_1 listp_2 (never executed)
-         Filter: (a = (InitPlan 1).col1)
-(7 rows)
-
-drop table listp;
---
--- check that stable query clauses are only used in run-time pruning
---
-create table stable_qual_pruning (a timestamp) partition by range (a);
-create table stable_qual_pruning1 partition of stable_qual_pruning
-  for values from ('2000-01-01') to ('2000-02-01');
-create table stable_qual_pruning2 partition of stable_qual_pruning
-  for values from ('2000-02-01') to ('2000-03-01');
-create table stable_qual_pruning3 partition of stable_qual_pruning
-  for values from ('3000-02-01') to ('3000-03-01');
--- comparison against a stable value requires run-time pruning
-explain (analyze, costs off, summary off, timing off)
-select * from stable_qual_pruning where a < localtimestamp;
-                                      QUERY PLAN                                      
---------------------------------------------------------------------------------------
- Append (actual rows=0 loops=1)
-   Subplans Removed: 1
-   ->  Seq Scan on stable_qual_pruning1 stable_qual_pruning_1 (actual rows=0 loops=1)
-         Filter: (a < LOCALTIMESTAMP)
-   ->  Seq Scan on stable_qual_pruning2 stable_qual_pruning_2 (actual rows=0 loops=1)
-         Filter: (a < LOCALTIMESTAMP)
-(6 rows)
-
--- timestamp < timestamptz comparison is only stable, not immutable
-explain (analyze, costs off, summary off, timing off)
-select * from stable_qual_pruning where a < '2000-02-01'::timestamptz;
-                                      QUERY PLAN                                      
---------------------------------------------------------------------------------------
- Append (actual rows=0 loops=1)
-   Subplans Removed: 2
-   ->  Seq Scan on stable_qual_pruning1 stable_qual_pruning_1 (actual rows=0 loops=1)
-         Filter: (a < 'Tue Feb 01 00:00:00 2000 PST'::timestamp with time zone)
-(4 rows)
-
--- check ScalarArrayOp cases
-explain (analyze, costs off, summary off, timing off)
-select * from stable_qual_pruning
-  where a = any(array['2010-02-01', '2020-01-01']::timestamp[]);
-           QUERY PLAN           
---------------------------------
- Result (actual rows=0 loops=1)
-   One-Time Filter: false
-(2 rows)
-
-explain (analyze, costs off, summary off, timing off)
-select * from stable_qual_pruning
-  where a = any(array['2000-02-01', '2010-01-01']::timestamp[]);
-                                                   QUERY PLAN                                                   
-----------------------------------------------------------------------------------------------------------------
- Seq Scan on stable_qual_pruning2 stable_qual_pruning (actual rows=0 loops=1)
-   Filter: (a = ANY ('{"Tue Feb 01 00:00:00 2000","Fri Jan 01 00:00:00 2010"}'::timestamp without time zone[]))
-(2 rows)
-
-explain (analyze, costs off, summary off, timing off)
-select * from stable_qual_pruning
-  where a = any(array['2000-02-01', localtimestamp]::timestamp[]);
-                                                 QUERY PLAN                                                 
-------------------------------------------------------------------------------------------------------------
- Append (actual rows=0 loops=1)
-   Subplans Removed: 2
-   ->  Seq Scan on stable_qual_pruning2 stable_qual_pruning_1 (actual rows=0 loops=1)
-         Filter: (a = ANY (ARRAY['Tue Feb 01 00:00:00 2000'::timestamp without time zone, LOCALTIMESTAMP]))
-(4 rows)
-
-explain (analyze, costs off, summary off, timing off)
-select * from stable_qual_pruning
-  where a = any(array['2010-02-01', '2020-01-01']::timestamptz[]);
-           QUERY PLAN           
---------------------------------
- Append (actual rows=0 loops=1)
-   Subplans Removed: 3
-(2 rows)
-
-explain (analyze, costs off, summary off, timing off)
-select * from stable_qual_pruning
-  where a = any(array['2000-02-01', '2010-01-01']::timestamptz[]);
-                                                        QUERY PLAN                                                         
----------------------------------------------------------------------------------------------------------------------------
- Append (actual rows=0 loops=1)
-   Subplans Removed: 2
-   ->  Seq Scan on stable_qual_pruning2 stable_qual_pruning_1 (actual rows=0 loops=1)
-         Filter: (a = ANY ('{"Tue Feb 01 00:00:00 2000 PST","Fri Jan 01 00:00:00 2010 PST"}'::timestamp with time zone[]))
-(4 rows)
-
-explain (analyze, costs off, summary off, timing off)
-select * from stable_qual_pruning
-  where a = any(null::timestamptz[]);
-                                      QUERY PLAN                                      
---------------------------------------------------------------------------------------
- Append (actual rows=0 loops=1)
-   ->  Seq Scan on stable_qual_pruning1 stable_qual_pruning_1 (actual rows=0 loops=1)
-         Filter: (a = ANY (NULL::timestamp with time zone[]))
-   ->  Seq Scan on stable_qual_pruning2 stable_qual_pruning_2 (actual rows=0 loops=1)
-         Filter: (a = ANY (NULL::timestamp with time zone[]))
-   ->  Seq Scan on stable_qual_pruning3 stable_qual_pruning_3 (actual rows=0 loops=1)
-         Filter: (a = ANY (NULL::timestamp with time zone[]))
-(7 rows)
-
-drop table stable_qual_pruning;
---
--- Check that pruning with composite range partitioning works correctly when
--- it must ignore clauses for trailing keys once it has seen a clause with
--- non-inclusive operator for an earlier key
---
-create table mc3p (a int, b int, c int) partition by range (a, abs(b), c);
-create table mc3p0 partition of mc3p
-  for values from (0, 0, 0) to (0, maxvalue, maxvalue);
-create table mc3p1 partition of mc3p
-  for values from (1, 1, 1) to (2, minvalue, minvalue);
-create table mc3p2 partition of mc3p
-  for values from (2, minvalue, minvalue) to (3, maxvalue, maxvalue);
-insert into mc3p values (0, 1, 1), (1, 1, 1), (2, 1, 1);
-explain (analyze, costs off, summary off, timing off)
-select * from mc3p where a < 3 and abs(b) = 1;
-                       QUERY PLAN                       
---------------------------------------------------------
- Append (actual rows=3 loops=1)
-   ->  Seq Scan on mc3p0 mc3p_1 (actual rows=1 loops=1)
-         Filter: ((a < 3) AND (abs(b) = 1))
-   ->  Seq Scan on mc3p1 mc3p_2 (actual rows=1 loops=1)
-         Filter: ((a < 3) AND (abs(b) = 1))
-   ->  Seq Scan on mc3p2 mc3p_3 (actual rows=1 loops=1)
-         Filter: ((a < 3) AND (abs(b) = 1))
-(7 rows)
-
---
--- Check that pruning with composite range partitioning works correctly when
--- a combination of runtime parameters is specified, not all of whose values
--- are available at the same time
---
-prepare ps1 as
-  select * from mc3p where a = $1 and abs(b) < (select 3);
-explain (analyze, costs off, summary off, timing off)
-execute ps1(1);
-                         QUERY PLAN                          
--------------------------------------------------------------
- Append (actual rows=1 loops=1)
-   Subplans Removed: 2
-   InitPlan 1
-     ->  Result (actual rows=1 loops=1)
-   ->  Seq Scan on mc3p1 mc3p_1 (actual rows=1 loops=1)
-         Filter: ((a = $1) AND (abs(b) < (InitPlan 1).col1))
-(6 rows)
-
-deallocate ps1;
-prepare ps2 as
-  select * from mc3p where a <= $1 and abs(b) < (select 3);
-explain (analyze, costs off, summary off, timing off)
-execute ps2(1);
-                          QUERY PLAN                          
---------------------------------------------------------------
- Append (actual rows=2 loops=1)
-   Subplans Removed: 1
-   InitPlan 1
-     ->  Result (actual rows=1 loops=1)
-   ->  Seq Scan on mc3p0 mc3p_1 (actual rows=1 loops=1)
-         Filter: ((a <= $1) AND (abs(b) < (InitPlan 1).col1))
-   ->  Seq Scan on mc3p1 mc3p_2 (actual rows=1 loops=1)
-         Filter: ((a <= $1) AND (abs(b) < (InitPlan 1).col1))
-(8 rows)
-
-deallocate ps2;
-drop table mc3p;
--- Ensure runtime pruning works with initplans params with boolean types
-create table boolvalues (value bool not null);
-insert into boolvalues values('t'),('f');
-create table boolp (a bool) partition by list (a);
-create table boolp_t partition of boolp for values in('t');
-create table boolp_f partition of boolp for values in('f');
-explain (analyze, costs off, summary off, timing off)
-select * from boolp where a = (select value from boolvalues where value);
-                        QUERY PLAN                         
------------------------------------------------------------
- Append (actual rows=0 loops=1)
-   InitPlan 1
-     ->  Seq Scan on boolvalues (actual rows=1 loops=1)
-           Filter: value
-           Rows Removed by Filter: 1
-   ->  Seq Scan on boolp_f boolp_1 (never executed)
-         Filter: (a = (InitPlan 1).col1)
-   ->  Seq Scan on boolp_t boolp_2 (actual rows=0 loops=1)
-         Filter: (a = (InitPlan 1).col1)
-(9 rows)
-
-explain (analyze, costs off, summary off, timing off)
-select * from boolp where a = (select value from boolvalues where not value);
-                        QUERY PLAN                         
------------------------------------------------------------
- Append (actual rows=0 loops=1)
-   InitPlan 1
-     ->  Seq Scan on boolvalues (actual rows=1 loops=1)
-           Filter: (NOT value)
-           Rows Removed by Filter: 1
-   ->  Seq Scan on boolp_f boolp_1 (actual rows=0 loops=1)
-         Filter: (a = (InitPlan 1).col1)
-   ->  Seq Scan on boolp_t boolp_2 (never executed)
-         Filter: (a = (InitPlan 1).col1)
-(9 rows)
-
-drop table boolp;
---
--- Test run-time pruning of MergeAppend subnodes
---
-set enable_seqscan = off;
-set enable_sort = off;
-create table ma_test (a int, b int) partition by range (a);
-create table ma_test_p1 partition of ma_test for values from (0) to (10);
-create table ma_test_p2 partition of ma_test for values from (10) to (20);
-create table ma_test_p3 partition of ma_test for values from (20) to (30);
-insert into ma_test select x,x from generate_series(0,29) t(x);
-create index on ma_test (b);
-analyze ma_test;
-prepare mt_q1 (int) as select a from ma_test where a >= $1 and a % 10 = 5 order by b;
-explain (analyze, costs off, summary off, timing off) execute mt_q1(15);
-                                       QUERY PLAN                                        
------------------------------------------------------------------------------------------
- Merge Append (actual rows=2 loops=1)
-   Sort Key: ma_test.b
-   Subplans Removed: 1
-   ->  Index Scan using ma_test_p2_b_idx on ma_test_p2 ma_test_1 (actual rows=1 loops=1)
-         Filter: ((a >= $1) AND ((a % 10) = 5))
-         Rows Removed by Filter: 9
-   ->  Index Scan using ma_test_p3_b_idx on ma_test_p3 ma_test_2 (actual rows=1 loops=1)
-         Filter: ((a >= $1) AND ((a % 10) = 5))
-         Rows Removed by Filter: 9
-(9 rows)
-
-execute mt_q1(15);
- a  
-----
- 15
- 25
-(2 rows)
-
-explain (analyze, costs off, summary off, timing off) execute mt_q1(25);
-                                       QUERY PLAN                                        
------------------------------------------------------------------------------------------
- Merge Append (actual rows=1 loops=1)
-   Sort Key: ma_test.b
-   Subplans Removed: 2
-   ->  Index Scan using ma_test_p3_b_idx on ma_test_p3 ma_test_1 (actual rows=1 loops=1)
-         Filter: ((a >= $1) AND ((a % 10) = 5))
-         Rows Removed by Filter: 9
-(6 rows)
-
-execute mt_q1(25);
- a  
-----
- 25
-(1 row)
-
--- Ensure MergeAppend behaves correctly when no subplans match
-explain (analyze, costs off, summary off, timing off) execute mt_q1(35);
-              QUERY PLAN              
---------------------------------------
- Merge Append (actual rows=0 loops=1)
-   Sort Key: ma_test.b
-   Subplans Removed: 3
-(3 rows)
-
-execute mt_q1(35);
- a 
----
-(0 rows)
-
-deallocate mt_q1;
-prepare mt_q2 (int) as select * from ma_test where a >= $1 order by b limit 1;
--- Ensure output list looks sane when the MergeAppend has no subplans.
-explain (analyze, verbose, costs off, summary off, timing off) execute mt_q2 (35);
-                 QUERY PLAN                 
---------------------------------------------
- Limit (actual rows=0 loops=1)
-   Output: ma_test.a, ma_test.b
-   ->  Merge Append (actual rows=0 loops=1)
-         Sort Key: ma_test.b
-         Subplans Removed: 3
-(5 rows)
-
-deallocate mt_q2;
--- ensure initplan params properly prune partitions
-explain (analyze, costs off, summary off, timing off) select * from ma_test where a >= (select min(b) from ma_test_p2) order by b;
-                                          QUERY PLAN                                           
------------------------------------------------------------------------------------------------
- Merge Append (actual rows=20 loops=1)
-   Sort Key: ma_test.b
-   InitPlan 2
-     ->  Result (actual rows=1 loops=1)
-           InitPlan 1
-             ->  Limit (actual rows=1 loops=1)
-                   ->  Index Scan using ma_test_p2_b_idx on ma_test_p2 (actual rows=1 loops=1)
-                         Index Cond: (b IS NOT NULL)
-   ->  Index Scan using ma_test_p1_b_idx on ma_test_p1 ma_test_1 (never executed)
-         Filter: (a >= (InitPlan 2).col1)
-   ->  Index Scan using ma_test_p2_b_idx on ma_test_p2 ma_test_2 (actual rows=10 loops=1)
-         Filter: (a >= (InitPlan 2).col1)
-   ->  Index Scan using ma_test_p3_b_idx on ma_test_p3 ma_test_3 (actual rows=10 loops=1)
-         Filter: (a >= (InitPlan 2).col1)
-(14 rows)
-
-reset enable_seqscan;
-reset enable_sort;
-drop table ma_test;
-reset enable_indexonlyscan;
---
--- check that pruning works properly when the partition key is of a
--- pseudotype
---
--- array type list partition key
-create table pp_arrpart (a int[]) partition by list (a);
-create table pp_arrpart1 partition of pp_arrpart for values in ('{1}');
-create table pp_arrpart2 partition of pp_arrpart for values in ('{2, 3}', '{4, 5}');
-explain (costs off) select * from pp_arrpart where a = '{1}';
-             QUERY PLAN             
-------------------------------------
- Seq Scan on pp_arrpart1 pp_arrpart
-   Filter: (a = '{1}'::integer[])
-(2 rows)
-
-explain (costs off) select * from pp_arrpart where a = '{1, 2}';
-        QUERY PLAN        
---------------------------
- Result
-   One-Time Filter: false
-(2 rows)
-
-explain (costs off) select * from pp_arrpart where a in ('{4, 5}', '{1}');
-                              QUERY PLAN                              
-----------------------------------------------------------------------
- Append
-   ->  Seq Scan on pp_arrpart1 pp_arrpart_1
-         Filter: ((a = '{4,5}'::integer[]) OR (a = '{1}'::integer[]))
-   ->  Seq Scan on pp_arrpart2 pp_arrpart_2
-         Filter: ((a = '{4,5}'::integer[]) OR (a = '{1}'::integer[]))
-(5 rows)
-
-explain (costs off) update pp_arrpart set a = a where a = '{1}';
-                 QUERY PLAN                 
---------------------------------------------
- Update on pp_arrpart
-   Update on pp_arrpart1 pp_arrpart_1
-   ->  Seq Scan on pp_arrpart1 pp_arrpart_1
-         Filter: (a = '{1}'::integer[])
-(4 rows)
-
-explain (costs off) delete from pp_arrpart where a = '{1}';
-                 QUERY PLAN                 
---------------------------------------------
- Delete on pp_arrpart
-   Delete on pp_arrpart1 pp_arrpart_1
-   ->  Seq Scan on pp_arrpart1 pp_arrpart_1
-         Filter: (a = '{1}'::integer[])
-(4 rows)
-
-drop table pp_arrpart;
--- array type hash partition key
-create table pph_arrpart (a int[]) partition by hash (a);
-create table pph_arrpart1 partition of pph_arrpart for values with (modulus 2, remainder 0);
-create table pph_arrpart2 partition of pph_arrpart for values with (modulus 2, remainder 1);
-insert into pph_arrpart values ('{1}'), ('{1, 2}'), ('{4, 5}');
-select tableoid::regclass, * from pph_arrpart order by 1;
-   tableoid   |   a   
---------------+-------
- pph_arrpart1 | {1,2}
- pph_arrpart1 | {4,5}
- pph_arrpart2 | {1}
-(3 rows)
-
-explain (costs off) select * from pph_arrpart where a = '{1}';
-              QUERY PLAN              
---------------------------------------
- Seq Scan on pph_arrpart2 pph_arrpart
-   Filter: (a = '{1}'::integer[])
-(2 rows)
-
-explain (costs off) select * from pph_arrpart where a = '{1, 2}';
-              QUERY PLAN              
---------------------------------------
- Seq Scan on pph_arrpart1 pph_arrpart
-   Filter: (a = '{1,2}'::integer[])
-(2 rows)
-
-explain (costs off) select * from pph_arrpart where a in ('{4, 5}', '{1}');
-                              QUERY PLAN                              
-----------------------------------------------------------------------
- Append
-   ->  Seq Scan on pph_arrpart1 pph_arrpart_1
-         Filter: ((a = '{4,5}'::integer[]) OR (a = '{1}'::integer[]))
-   ->  Seq Scan on pph_arrpart2 pph_arrpart_2
-         Filter: ((a = '{4,5}'::integer[]) OR (a = '{1}'::integer[]))
-(5 rows)
-
-drop table pph_arrpart;
--- enum type list partition key
-create type pp_colors as enum ('green', 'blue', 'black');
-create table pp_enumpart (a pp_colors) partition by list (a);
-create table pp_enumpart_green partition of pp_enumpart for values in ('green');
-create table pp_enumpart_blue partition of pp_enumpart for values in ('blue');
-explain (costs off) select * from pp_enumpart where a = 'blue';
-                QUERY PLAN                
-------------------------------------------
- Seq Scan on pp_enumpart_blue pp_enumpart
-   Filter: (a = 'blue'::pp_colors)
-(2 rows)
-
-explain (costs off) select * from pp_enumpart where a = 'black';
-        QUERY PLAN        
---------------------------
- Result
-   One-Time Filter: false
-(2 rows)
-
-drop table pp_enumpart;
-drop type pp_colors;
--- record type as partition key
-create type pp_rectype as (a int, b int);
-create table pp_recpart (a pp_rectype) partition by list (a);
-create table pp_recpart_11 partition of pp_recpart for values in ('(1,1)');
-create table pp_recpart_23 partition of pp_recpart for values in ('(2,3)');
-explain (costs off) select * from pp_recpart where a = '(1,1)'::pp_rectype;
-              QUERY PLAN              
---------------------------------------
- Seq Scan on pp_recpart_11 pp_recpart
-   Filter: (a = '(1,1)'::pp_rectype)
-(2 rows)
-
-explain (costs off) select * from pp_recpart where a = '(1,2)'::pp_rectype;
-        QUERY PLAN        
---------------------------
- Result
-   One-Time Filter: false
-(2 rows)
-
-drop table pp_recpart;
-drop type pp_rectype;
--- range type partition key
-create table pp_intrangepart (a int4range) partition by list (a);
-create table pp_intrangepart12 partition of pp_intrangepart for values in ('[1,2]');
-create table pp_intrangepart2inf partition of pp_intrangepart for values in ('[2,)');
-explain (costs off) select * from pp_intrangepart where a = '[1,2]'::int4range;
-                  QUERY PLAN                   
------------------------------------------------
- Seq Scan on pp_intrangepart12 pp_intrangepart
-   Filter: (a = '[1,3)'::int4range)
-(2 rows)
-
-explain (costs off) select * from pp_intrangepart where a = '(1,2)'::int4range;
-        QUERY PLAN        
---------------------------
- Result
-   One-Time Filter: false
-(2 rows)
-
-drop table pp_intrangepart;
---
--- Ensure the enable_partition_prune GUC properly disables partition pruning.
---
-create table pp_lp (a int, value int) partition by list (a);
-create table pp_lp1 partition of pp_lp for values in(1);
-create table pp_lp2 partition of pp_lp for values in(2);
-explain (costs off) select * from pp_lp where a = 1;
-        QUERY PLAN        
---------------------------
- Seq Scan on pp_lp1 pp_lp
-   Filter: (a = 1)
-(2 rows)
-
-explain (costs off) update pp_lp set value = 10 where a = 1;
-            QUERY PLAN            
-----------------------------------
- Update on pp_lp
-   Update on pp_lp1 pp_lp_1
-   ->  Seq Scan on pp_lp1 pp_lp_1
-         Filter: (a = 1)
-(4 rows)
-
-explain (costs off) delete from pp_lp where a = 1;
-            QUERY PLAN            
-----------------------------------
- Delete on pp_lp
-   Delete on pp_lp1 pp_lp_1
-   ->  Seq Scan on pp_lp1 pp_lp_1
-         Filter: (a = 1)
-(4 rows)
-
-set enable_partition_pruning = off;
-set constraint_exclusion = 'partition'; -- this should not affect the result.
-explain (costs off) select * from pp_lp where a = 1;
-            QUERY PLAN            
-----------------------------------
- Append
-   ->  Seq Scan on pp_lp1 pp_lp_1
-         Filter: (a = 1)
-   ->  Seq Scan on pp_lp2 pp_lp_2
-         Filter: (a = 1)
-(5 rows)
-
-explain (costs off) update pp_lp set value = 10 where a = 1;
-               QUERY PLAN               
-----------------------------------------
- Update on pp_lp
-   Update on pp_lp1 pp_lp_1
-   Update on pp_lp2 pp_lp_2
-   ->  Append
-         ->  Seq Scan on pp_lp1 pp_lp_1
-               Filter: (a = 1)
-         ->  Seq Scan on pp_lp2 pp_lp_2
-               Filter: (a = 1)
-(8 rows)
-
-explain (costs off) delete from pp_lp where a = 1;
-               QUERY PLAN               
-----------------------------------------
- Delete on pp_lp
-   Delete on pp_lp1 pp_lp_1
-   Delete on pp_lp2 pp_lp_2
-   ->  Append
-         ->  Seq Scan on pp_lp1 pp_lp_1
-               Filter: (a = 1)
-         ->  Seq Scan on pp_lp2 pp_lp_2
-               Filter: (a = 1)
-(8 rows)
-
-set constraint_exclusion = 'off'; -- this should not affect the result.
-explain (costs off) select * from pp_lp where a = 1;
-            QUERY PLAN            
-----------------------------------
- Append
-   ->  Seq Scan on pp_lp1 pp_lp_1
-         Filter: (a = 1)
-   ->  Seq Scan on pp_lp2 pp_lp_2
-         Filter: (a = 1)
-(5 rows)
-
-explain (costs off) update pp_lp set value = 10 where a = 1;
-               QUERY PLAN               
-----------------------------------------
- Update on pp_lp
-   Update on pp_lp1 pp_lp_1
-   Update on pp_lp2 pp_lp_2
-   ->  Append
-         ->  Seq Scan on pp_lp1 pp_lp_1
-               Filter: (a = 1)
-         ->  Seq Scan on pp_lp2 pp_lp_2
-               Filter: (a = 1)
-(8 rows)
-
-explain (costs off) delete from pp_lp where a = 1;
-               QUERY PLAN               
-----------------------------------------
- Delete on pp_lp
-   Delete on pp_lp1 pp_lp_1
-   Delete on pp_lp2 pp_lp_2
-   ->  Append
-         ->  Seq Scan on pp_lp1 pp_lp_1
-               Filter: (a = 1)
-         ->  Seq Scan on pp_lp2 pp_lp_2
-               Filter: (a = 1)
-(8 rows)
-
-drop table pp_lp;
--- Ensure enable_partition_prune does not affect non-partitioned tables.
-create table inh_lp (a int, value int);
-create table inh_lp1 (a int, value int, check(a = 1)) inherits (inh_lp);
-NOTICE:  merging column "a" with inherited definition
-NOTICE:  merging column "value" with inherited definition
-create table inh_lp2 (a int, value int, check(a = 2)) inherits (inh_lp);
-NOTICE:  merging column "a" with inherited definition
-NOTICE:  merging column "value" with inherited definition
-set constraint_exclusion = 'partition';
--- inh_lp2 should be removed in the following 3 cases.
-explain (costs off) select * from inh_lp where a = 1;
-             QUERY PLAN             
-------------------------------------
- Append
-   ->  Seq Scan on inh_lp inh_lp_1
-         Filter: (a = 1)
-   ->  Seq Scan on inh_lp1 inh_lp_2
-         Filter: (a = 1)
-(5 rows)
-
-explain (costs off) update inh_lp set value = 10 where a = 1;
-                   QUERY PLAN                   
-------------------------------------------------
- Update on inh_lp
-   Update on inh_lp inh_lp_1
-   Update on inh_lp1 inh_lp_2
-   ->  Result
-         ->  Append
-               ->  Seq Scan on inh_lp inh_lp_1
-                     Filter: (a = 1)
-               ->  Seq Scan on inh_lp1 inh_lp_2
-                     Filter: (a = 1)
-(9 rows)
-
-explain (costs off) delete from inh_lp where a = 1;
-                QUERY PLAN                
-------------------------------------------
- Delete on inh_lp
-   Delete on inh_lp inh_lp_1
-   Delete on inh_lp1 inh_lp_2
-   ->  Append
-         ->  Seq Scan on inh_lp inh_lp_1
-               Filter: (a = 1)
-         ->  Seq Scan on inh_lp1 inh_lp_2
-               Filter: (a = 1)
-(8 rows)
-
--- Ensure we don't exclude normal relations when we only expect to exclude
--- inheritance children
-explain (costs off) update inh_lp1 set value = 10 where a = 2;
-        QUERY PLAN         
----------------------------
- Update on inh_lp1
-   ->  Seq Scan on inh_lp1
-         Filter: (a = 2)
-(3 rows)
-
-drop table inh_lp cascade;
-NOTICE:  drop cascades to 2 other objects
-DETAIL:  drop cascades to table inh_lp1
-drop cascades to table inh_lp2
-reset enable_partition_pruning;
-reset constraint_exclusion;
--- Check pruning for a partition tree containing only temporary relations
-create temp table pp_temp_parent (a int) partition by list (a);
-create temp table pp_temp_part_1 partition of pp_temp_parent for values in (1);
-create temp table pp_temp_part_def partition of pp_temp_parent default;
-explain (costs off) select * from pp_temp_parent where true;
-                     QUERY PLAN                      
------------------------------------------------------
- Append
-   ->  Seq Scan on pp_temp_part_1 pp_temp_parent_1
-   ->  Seq Scan on pp_temp_part_def pp_temp_parent_2
-(3 rows)
-
-explain (costs off) select * from pp_temp_parent where a = 2;
-                 QUERY PLAN                  
----------------------------------------------
- Seq Scan on pp_temp_part_def pp_temp_parent
-   Filter: (a = 2)
-(2 rows)
-
-drop table pp_temp_parent;
--- Stress run-time partition pruning a bit more, per bug reports
-create temp table p (a int, b int, c int) partition by list (a);
-create temp table p1 partition of p for values in (1);
-create temp table p2 partition of p for values in (2);
-create temp table q (a int, b int, c int) partition by list (a);
-create temp table q1 partition of q for values in (1) partition by list (b);
-create temp table q11 partition of q1 for values in (1) partition by list (c);
-create temp table q111 partition of q11 for values in (1);
-create temp table q2 partition of q for values in (2) partition by list (b);
-create temp table q21 partition of q2 for values in (1);
-create temp table q22 partition of q2 for values in (2);
-insert into q22 values (2, 2, 3);
-explain (costs off)
-select *
-from (
-      select * from p
-      union all
-      select * from q1
-      union all
-      select 1, 1, 1
-     ) s(a, b, c)
-where s.a = 1 and s.b = 1 and s.c = (select 1);
-                            QUERY PLAN                             
--------------------------------------------------------------------
- Append
-   InitPlan 1
-     ->  Result
-   ->  Seq Scan on p1 p
-         Filter: ((a = 1) AND (b = 1) AND (c = (InitPlan 1).col1))
-   ->  Seq Scan on q111 q1
-         Filter: ((a = 1) AND (b = 1) AND (c = (InitPlan 1).col1))
-   ->  Result
-         One-Time Filter: (1 = (InitPlan 1).col1)
-(9 rows)
-
-select *
-from (
-      select * from p
-      union all
-      select * from q1
-      union all
-      select 1, 1, 1
-     ) s(a, b, c)
-where s.a = 1 and s.b = 1 and s.c = (select 1);
- a | b | c 
----+---+---
- 1 | 1 | 1
-(1 row)
-
-prepare q (int, int) as
-select *
-from (
-      select * from p
-      union all
-      select * from q1
-      union all
-      select 1, 1, 1
-     ) s(a, b, c)
-where s.a = $1 and s.b = $2 and s.c = (select 1);
-explain (costs off) execute q (1, 1);
-                                  QUERY PLAN                                  
-------------------------------------------------------------------------------
- Append
-   Subplans Removed: 1
-   InitPlan 1
-     ->  Result
-   ->  Seq Scan on p1 p
-         Filter: ((a = $1) AND (b = $2) AND (c = (InitPlan 1).col1))
-   ->  Seq Scan on q111 q1
-         Filter: ((a = $1) AND (b = $2) AND (c = (InitPlan 1).col1))
-   ->  Result
-         One-Time Filter: ((1 = $1) AND (1 = $2) AND (1 = (InitPlan 1).col1))
-(10 rows)
-
-execute q (1, 1);
- a | b | c 
----+---+---
- 1 | 1 | 1
-(1 row)
-
-drop table p, q;
--- Ensure run-time pruning works correctly when we match a partitioned table
--- on the first level but find no matching partitions on the second level.
-create table listp (a int, b int) partition by list (a);
-create table listp1 partition of listp for values in(1);
-create table listp2 partition of listp for values in(2) partition by list(b);
-create table listp2_10 partition of listp2 for values in (10);
-explain (analyze, costs off, summary off, timing off)
-select * from listp where a = (select 2) and b <> 10;
-                    QUERY PLAN                     
----------------------------------------------------
- Seq Scan on listp1 listp (actual rows=0 loops=1)
-   Filter: ((b <> 10) AND (a = (InitPlan 1).col1))
-   InitPlan 1
-     ->  Result (never executed)
-(4 rows)
-
---
--- check that a partition directly accessed in a query is excluded with
--- constraint_exclusion = on
---
--- turn off partition pruning, so that it doesn't interfere
-set enable_partition_pruning to off;
--- setting constraint_exclusion to 'partition' disables exclusion
-set constraint_exclusion to 'partition';
-explain (costs off) select * from listp1 where a = 2;
-     QUERY PLAN     
---------------------
- Seq Scan on listp1
-   Filter: (a = 2)
-(2 rows)
-
-explain (costs off) update listp1 set a = 1 where a = 2;
-        QUERY PLAN        
---------------------------
- Update on listp1
-   ->  Seq Scan on listp1
-         Filter: (a = 2)
-(3 rows)
-
--- constraint exclusion enabled
-set constraint_exclusion to 'on';
-explain (costs off) select * from listp1 where a = 2;
-        QUERY PLAN        
---------------------------
- Result
-   One-Time Filter: false
-(2 rows)
-
-explain (costs off) update listp1 set a = 1 where a = 2;
-           QUERY PLAN           
---------------------------------
- Update on listp1
-   ->  Result
-         One-Time Filter: false
-(3 rows)
-
-reset constraint_exclusion;
-reset enable_partition_pruning;
-drop table listp;
--- Ensure run-time pruning works correctly for nested Append nodes
-set parallel_setup_cost to 0;
-set parallel_tuple_cost to 0;
-create table listp (a int) partition by list(a);
-create table listp_12 partition of listp for values in(1,2) partition by list(a);
-create table listp_12_1 partition of listp_12 for values in(1);
-create table listp_12_2 partition of listp_12 for values in(2);
--- Force the 2nd subnode of the Append to be non-parallel.  This results in
--- a nested Append node because the mixed parallel / non-parallel paths cannot
--- be pulled into the top-level Append.
-alter table listp_12_1 set (parallel_workers = 0);
--- Ensure that listp_12_2 is not scanned.  (The nested Append is not seen in
--- the plan as it's pulled in setref.c due to having just a single subnode).
-select explain_parallel_append('select * from listp where a = (select 1);');
-                       explain_parallel_append                        
-----------------------------------------------------------------------
- Gather (actual rows=N loops=N)
-   Workers Planned: 2
-   Workers Launched: N
-   InitPlan 1
-     ->  Result (actual rows=N loops=N)
-   ->  Parallel Append (actual rows=N loops=N)
-         ->  Seq Scan on listp_12_1 listp_1 (actual rows=N loops=N)
-               Filter: (a = (InitPlan 1).col1)
-         ->  Parallel Seq Scan on listp_12_2 listp_2 (never executed)
-               Filter: (a = (InitPlan 1).col1)
-(10 rows)
-
--- Like the above but throw some more complexity at the planner by adding
--- a UNION ALL.  We expect both sides of the union not to scan the
--- non-required partitions.
-select explain_parallel_append(
-'select * from listp where a = (select 1)
-  union all
-select * from listp where a = (select 2);');
-                              explain_parallel_append                              
------------------------------------------------------------------------------------
- Gather (actual rows=N loops=N)
-   Workers Planned: 2
-   Workers Launched: N
-   ->  Parallel Append (actual rows=N loops=N)
-         ->  Parallel Append (actual rows=N loops=N)
-               InitPlan 2
-                 ->  Result (actual rows=N loops=N)
-               ->  Seq Scan on listp_12_1 listp_1 (never executed)
-                     Filter: (a = (InitPlan 2).col1)
-               ->  Parallel Seq Scan on listp_12_2 listp_2 (actual rows=N loops=N)
-                     Filter: (a = (InitPlan 2).col1)
-         ->  Parallel Append (actual rows=N loops=N)
-               InitPlan 1
-                 ->  Result (actual rows=N loops=N)
-               ->  Seq Scan on listp_12_1 listp_4 (actual rows=N loops=N)
-                     Filter: (a = (InitPlan 1).col1)
-               ->  Parallel Seq Scan on listp_12_2 listp_5 (never executed)
-                     Filter: (a = (InitPlan 1).col1)
-(18 rows)
-
-drop table listp;
-reset parallel_tuple_cost;
-reset parallel_setup_cost;
--- Test case for run-time pruning with a nested Merge Append
-set enable_sort to 0;
-create table rangep (a int, b int) partition by range (a);
-create table rangep_0_to_100 partition of rangep for values from (0) to (100) partition by list (b);
--- We need 3 sub-partitions. 1 to validate pruning worked and another two
--- because a single remaining partition would be pulled up to the main Append.
-create table rangep_0_to_100_1 partition of rangep_0_to_100 for values in(1);
-create table rangep_0_to_100_2 partition of rangep_0_to_100 for values in(2);
-create table rangep_0_to_100_3 partition of rangep_0_to_100 for values in(3);
-create table rangep_100_to_200 partition of rangep for values from (100) to (200);
-create index on rangep (a);
--- Ensure run-time pruning works on the nested Merge Append
-explain (analyze on, costs off, timing off, summary off)
-select * from rangep where b IN((select 1),(select 2)) order by a;
-                                                 QUERY PLAN                                                 
-------------------------------------------------------------------------------------------------------------
- Append (actual rows=0 loops=1)
-   InitPlan 1
-     ->  Result (actual rows=1 loops=1)
-   InitPlan 2
-     ->  Result (actual rows=1 loops=1)
-   ->  Merge Append (actual rows=0 loops=1)
-         Sort Key: rangep_2.a
-         ->  Index Scan using rangep_0_to_100_1_a_idx on rangep_0_to_100_1 rangep_2 (actual rows=0 loops=1)
-               Filter: (b = ANY (ARRAY[(InitPlan 1).col1, (InitPlan 2).col1]))
-         ->  Index Scan using rangep_0_to_100_2_a_idx on rangep_0_to_100_2 rangep_3 (actual rows=0 loops=1)
-               Filter: (b = ANY (ARRAY[(InitPlan 1).col1, (InitPlan 2).col1]))
-         ->  Index Scan using rangep_0_to_100_3_a_idx on rangep_0_to_100_3 rangep_4 (never executed)
-               Filter: (b = ANY (ARRAY[(InitPlan 1).col1, (InitPlan 2).col1]))
-   ->  Index Scan using rangep_100_to_200_a_idx on rangep_100_to_200 rangep_5 (actual rows=0 loops=1)
-         Filter: (b = ANY (ARRAY[(InitPlan 1).col1, (InitPlan 2).col1]))
-(15 rows)
-
-reset enable_sort;
-drop table rangep;
---
--- Check that gen_prune_steps_from_opexps() works well for various cases of
--- clauses for different partition keys
---
-create table rp_prefix_test1 (a int, b varchar) partition by range(a, b);
-create table rp_prefix_test1_p1 partition of rp_prefix_test1 for values from (1, 'a') to (1, 'b');
-create table rp_prefix_test1_p2 partition of rp_prefix_test1 for values from (2, 'a') to (2, 'b');
--- Don't call get_steps_using_prefix() with the last partition key b plus
--- an empty prefix
-explain (costs off) select * from rp_prefix_test1 where a <= 1 and b = 'a';
-                    QUERY PLAN                    
---------------------------------------------------
- Seq Scan on rp_prefix_test1_p1 rp_prefix_test1
-   Filter: ((a <= 1) AND ((b)::text = 'a'::text))
-(2 rows)
-
-create table rp_prefix_test2 (a int, b int, c int) partition by range(a, b, c);
-create table rp_prefix_test2_p1 partition of rp_prefix_test2 for values from (1, 1, 0) to (1, 1, 10);
-create table rp_prefix_test2_p2 partition of rp_prefix_test2 for values from (2, 2, 0) to (2, 2, 10);
--- Don't call get_steps_using_prefix() with the last partition key c plus
--- an invalid prefix (ie, b = 1)
-explain (costs off) select * from rp_prefix_test2 where a <= 1 and b = 1 and c >= 0;
-                   QUERY PLAN                   
-------------------------------------------------
- Seq Scan on rp_prefix_test2_p1 rp_prefix_test2
-   Filter: ((a <= 1) AND (c >= 0) AND (b = 1))
-(2 rows)
-
-create table rp_prefix_test3 (a int, b int, c int, d int) partition by range(a, b, c, d);
-create table rp_prefix_test3_p1 partition of rp_prefix_test3 for values from (1, 1, 1, 0) to (1, 1, 1, 10);
-create table rp_prefix_test3_p2 partition of rp_prefix_test3 for values from (2, 2, 2, 0) to (2, 2, 2, 10);
--- Test that get_steps_using_prefix() handles a prefix that contains multiple
--- clauses for the partition key b (ie, b >= 1 and b >= 2)
-explain (costs off) select * from rp_prefix_test3 where a >= 1 and b >= 1 and b >= 2 and c >= 2 and d >= 0;
-                                QUERY PLAN                                
---------------------------------------------------------------------------
- Seq Scan on rp_prefix_test3_p2 rp_prefix_test3
-   Filter: ((a >= 1) AND (b >= 1) AND (b >= 2) AND (c >= 2) AND (d >= 0))
-(2 rows)
-
--- Test that get_steps_using_prefix() handles a prefix that contains multiple
--- clauses for the partition key b (ie, b >= 1 and b = 2)  (This also tests
--- that the caller arranges clauses in that prefix in the required order)
-explain (costs off) select * from rp_prefix_test3 where a >= 1 and b >= 1 and b = 2 and c = 2 and d >= 0;
-                               QUERY PLAN                               
-------------------------------------------------------------------------
- Seq Scan on rp_prefix_test3_p2 rp_prefix_test3
-   Filter: ((a >= 1) AND (b >= 1) AND (d >= 0) AND (b = 2) AND (c = 2))
-(2 rows)
-
-drop table rp_prefix_test1;
-drop table rp_prefix_test2;
-drop table rp_prefix_test3;
---
--- Test that get_steps_using_prefix() handles IS NULL clauses correctly
---
-create table hp_prefix_test (a int, b int, c int, d int)
-  partition by hash (a part_test_int4_ops, b part_test_int4_ops, c part_test_int4_ops, d part_test_int4_ops);
--- create 8 partitions
-select 'create table hp_prefix_test_p' || x::text || ' partition of hp_prefix_test for values with (modulus 8, remainder ' || x::text || ');'
-from generate_Series(0,7) x;
-                                               ?column?                                               
-------------------------------------------------------------------------------------------------------
- create table hp_prefix_test_p0 partition of hp_prefix_test for values with (modulus 8, remainder 0);
- create table hp_prefix_test_p1 partition of hp_prefix_test for values with (modulus 8, remainder 1);
- create table hp_prefix_test_p2 partition of hp_prefix_test for values with (modulus 8, remainder 2);
- create table hp_prefix_test_p3 partition of hp_prefix_test for values with (modulus 8, remainder 3);
- create table hp_prefix_test_p4 partition of hp_prefix_test for values with (modulus 8, remainder 4);
- create table hp_prefix_test_p5 partition of hp_prefix_test for values with (modulus 8, remainder 5);
- create table hp_prefix_test_p6 partition of hp_prefix_test for values with (modulus 8, remainder 6);
- create table hp_prefix_test_p7 partition of hp_prefix_test for values with (modulus 8, remainder 7);
-(8 rows)
-
-\gexec
-create table hp_prefix_test_p0 partition of hp_prefix_test for values with (modulus 8, remainder 0);
-create table hp_prefix_test_p1 partition of hp_prefix_test for values with (modulus 8, remainder 1);
-create table hp_prefix_test_p2 partition of hp_prefix_test for values with (modulus 8, remainder 2);
-create table hp_prefix_test_p3 partition of hp_prefix_test for values with (modulus 8, remainder 3);
-create table hp_prefix_test_p4 partition of hp_prefix_test for values with (modulus 8, remainder 4);
-create table hp_prefix_test_p5 partition of hp_prefix_test for values with (modulus 8, remainder 5);
-create table hp_prefix_test_p6 partition of hp_prefix_test for values with (modulus 8, remainder 6);
-create table hp_prefix_test_p7 partition of hp_prefix_test for values with (modulus 8, remainder 7);
--- insert 16 rows, one row for each test to perform.
-insert into hp_prefix_test
-select
-  case a when 0 then null else 1 end,
-  case b when 0 then null else 2 end,
-  case c when 0 then null else 3 end,
-  case d when 0 then null else 4 end
-from
-  generate_series(0,1) a,
-  generate_series(0,1) b,
-  generate_Series(0,1) c,
-  generate_Series(0,1) d;
--- Ensure partition pruning works correctly for each combination of IS NULL
--- and equality quals.  This may seem a little excessive, but there have been
--- a number of bugs in this area over the years.  We make use of row only
--- output to reduce the size of the expected results.
-\t on
-select
-  'explain (costs off) select tableoid::regclass,* from hp_prefix_test where ' ||
-  string_agg(c.colname || case when g.s & (1 << c.colpos) = 0 then ' is null' else ' = ' || (colpos+1)::text end, ' and ' order by c.colpos)
-from (values('a',0),('b',1),('c',2),('d',3)) c(colname, colpos), generate_Series(0,15) g(s)
-group by g.s
-order by g.s;
- explain (costs off) select tableoid::regclass,* from hp_prefix_test where a is null and b is null and c is null and d is null
- explain (costs off) select tableoid::regclass,* from hp_prefix_test where a = 1 and b is null and c is null and d is null
- explain (costs off) select tableoid::regclass,* from hp_prefix_test where a is null and b = 2 and c is null and d is null
- explain (costs off) select tableoid::regclass,* from hp_prefix_test where a = 1 and b = 2 and c is null and d is null
- explain (costs off) select tableoid::regclass,* from hp_prefix_test where a is null and b is null and c = 3 and d is null
- explain (costs off) select tableoid::regclass,* from hp_prefix_test where a = 1 and b is null and c = 3 and d is null
- explain (costs off) select tableoid::regclass,* from hp_prefix_test where a is null and b = 2 and c = 3 and d is null
- explain (costs off) select tableoid::regclass,* from hp_prefix_test where a = 1 and b = 2 and c = 3 and d is null
- explain (costs off) select tableoid::regclass,* from hp_prefix_test where a is null and b is null and c is null and d = 4
- explain (costs off) select tableoid::regclass,* from hp_prefix_test where a = 1 and b is null and c is null and d = 4
- explain (costs off) select tableoid::regclass,* from hp_prefix_test where a is null and b = 2 and c is null and d = 4
- explain (costs off) select tableoid::regclass,* from hp_prefix_test where a = 1 and b = 2 and c is null and d = 4
- explain (costs off) select tableoid::regclass,* from hp_prefix_test where a is null and b is null and c = 3 and d = 4
- explain (costs off) select tableoid::regclass,* from hp_prefix_test where a = 1 and b is null and c = 3 and d = 4
- explain (costs off) select tableoid::regclass,* from hp_prefix_test where a is null and b = 2 and c = 3 and d = 4
- explain (costs off) select tableoid::regclass,* from hp_prefix_test where a = 1 and b = 2 and c = 3 and d = 4
-
-\gexec
-explain (costs off) select tableoid::regclass,* from hp_prefix_test where a is null and b is null and c is null and d is null
- Seq Scan on hp_prefix_test_p0 hp_prefix_test
-   Filter: ((a IS NULL) AND (b IS NULL) AND (c IS NULL) AND (d IS NULL))
-
-explain (costs off) select tableoid::regclass,* from hp_prefix_test where a = 1 and b is null and c is null and d is null
- Seq Scan on hp_prefix_test_p1 hp_prefix_test
-   Filter: ((b IS NULL) AND (c IS NULL) AND (d IS NULL) AND (a = 1))
-
-explain (costs off) select tableoid::regclass,* from hp_prefix_test where a is null and b = 2 and c is null and d is null
- Seq Scan on hp_prefix_test_p2 hp_prefix_test
-   Filter: ((a IS NULL) AND (c IS NULL) AND (d IS NULL) AND (b = 2))
-
-explain (costs off) select tableoid::regclass,* from hp_prefix_test where a = 1 and b = 2 and c is null and d is null
- Seq Scan on hp_prefix_test_p4 hp_prefix_test
-   Filter: ((c IS NULL) AND (d IS NULL) AND (a = 1) AND (b = 2))
-
-explain (costs off) select tableoid::regclass,* from hp_prefix_test where a is null and b is null and c = 3 and d is null
- Seq Scan on hp_prefix_test_p3 hp_prefix_test
-   Filter: ((a IS NULL) AND (b IS NULL) AND (d IS NULL) AND (c = 3))
-
-explain (costs off) select tableoid::regclass,* from hp_prefix_test where a = 1 and b is null and c = 3 and d is null
- Seq Scan on hp_prefix_test_p7 hp_prefix_test
-   Filter: ((b IS NULL) AND (d IS NULL) AND (a = 1) AND (c = 3))
-
-explain (costs off) select tableoid::regclass,* from hp_prefix_test where a is null and b = 2 and c = 3 and d is null
- Seq Scan on hp_prefix_test_p4 hp_prefix_test
-   Filter: ((a IS NULL) AND (d IS NULL) AND (b = 2) AND (c = 3))
-
-explain (costs off) select tableoid::regclass,* from hp_prefix_test where a = 1 and b = 2 and c = 3 and d is null
- Seq Scan on hp_prefix_test_p5 hp_prefix_test
-   Filter: ((d IS NULL) AND (a = 1) AND (b = 2) AND (c = 3))
-
-explain (costs off) select tableoid::regclass,* from hp_prefix_test where a is null and b is null and c is null and d = 4
- Seq Scan on hp_prefix_test_p4 hp_prefix_test
-   Filter: ((a IS NULL) AND (b IS NULL) AND (c IS NULL) AND (d = 4))
-
-explain (costs off) select tableoid::regclass,* from hp_prefix_test where a = 1 and b is null and c is null and d = 4
- Seq Scan on hp_prefix_test_p6 hp_prefix_test
-   Filter: ((b IS NULL) AND (c IS NULL) AND (a = 1) AND (d = 4))
-
-explain (costs off) select tableoid::regclass,* from hp_prefix_test where a is null and b = 2 and c is null and d = 4
- Seq Scan on hp_prefix_test_p5 hp_prefix_test
-   Filter: ((a IS NULL) AND (c IS NULL) AND (b = 2) AND (d = 4))
-
-explain (costs off) select tableoid::regclass,* from hp_prefix_test where a = 1 and b = 2 and c is null and d = 4
- Seq Scan on hp_prefix_test_p6 hp_prefix_test
-   Filter: ((c IS NULL) AND (a = 1) AND (b = 2) AND (d = 4))
-
-explain (costs off) select tableoid::regclass,* from hp_prefix_test where a is null and b is null and c = 3 and d = 4
- Seq Scan on hp_prefix_test_p4 hp_prefix_test
-   Filter: ((a IS NULL) AND (b IS NULL) AND (c = 3) AND (d = 4))
-
-explain (costs off) select tableoid::regclass,* from hp_prefix_test where a = 1 and b is null and c = 3 and d = 4
- Seq Scan on hp_prefix_test_p5 hp_prefix_test
-   Filter: ((b IS NULL) AND (a = 1) AND (c = 3) AND (d = 4))
-
-explain (costs off) select tableoid::regclass,* from hp_prefix_test where a is null and b = 2 and c = 3 and d = 4
- Seq Scan on hp_prefix_test_p6 hp_prefix_test
-   Filter: ((a IS NULL) AND (b = 2) AND (c = 3) AND (d = 4))
-
-explain (costs off) select tableoid::regclass,* from hp_prefix_test where a = 1 and b = 2 and c = 3 and d = 4
- Seq Scan on hp_prefix_test_p4 hp_prefix_test
-   Filter: ((a = 1) AND (b = 2) AND (c = 3) AND (d = 4))
-
--- And ensure we get exactly 1 row from each. Again, all 16 possible combinations.
-select
-  'select tableoid::regclass,* from hp_prefix_test where ' ||
-  string_agg(c.colname || case when g.s & (1 << c.colpos) = 0 then ' is null' else ' = ' || (colpos+1)::text end, ' and ' order by c.colpos)
-from (values('a',0),('b',1),('c',2),('d',3)) c(colname, colpos), generate_Series(0,15) g(s)
-group by g.s
-order by g.s;
- select tableoid::regclass,* from hp_prefix_test where a is null and b is null and c is null and d is null
- select tableoid::regclass,* from hp_prefix_test where a = 1 and b is null and c is null and d is null
- select tableoid::regclass,* from hp_prefix_test where a is null and b = 2 and c is null and d is null
- select tableoid::regclass,* from hp_prefix_test where a = 1 and b = 2 and c is null and d is null
- select tableoid::regclass,* from hp_prefix_test where a is null and b is null and c = 3 and d is null
- select tableoid::regclass,* from hp_prefix_test where a = 1 and b is null and c = 3 and d is null
- select tableoid::regclass,* from hp_prefix_test where a is null and b = 2 and c = 3 and d is null
- select tableoid::regclass,* from hp_prefix_test where a = 1 and b = 2 and c = 3 and d is null
- select tableoid::regclass,* from hp_prefix_test where a is null and b is null and c is null and d = 4
- select tableoid::regclass,* from hp_prefix_test where a = 1 and b is null and c is null and d = 4
- select tableoid::regclass,* from hp_prefix_test where a is null and b = 2 and c is null and d = 4
- select tableoid::regclass,* from hp_prefix_test where a = 1 and b = 2 and c is null and d = 4
- select tableoid::regclass,* from hp_prefix_test where a is null and b is null and c = 3 and d = 4
- select tableoid::regclass,* from hp_prefix_test where a = 1 and b is null and c = 3 and d = 4
- select tableoid::regclass,* from hp_prefix_test where a is null and b = 2 and c = 3 and d = 4
- select tableoid::regclass,* from hp_prefix_test where a = 1 and b = 2 and c = 3 and d = 4
-
-\gexec
-select tableoid::regclass,* from hp_prefix_test where a is null and b is null and c is null and d is null
- hp_prefix_test_p0 |   |   |   |  
-
-select tableoid::regclass,* from hp_prefix_test where a = 1 and b is null and c is null and d is null
- hp_prefix_test_p1 | 1 |   |   |  
-
-select tableoid::regclass,* from hp_prefix_test where a is null and b = 2 and c is null and d is null
- hp_prefix_test_p2 |   | 2 |   |  
-
-select tableoid::regclass,* from hp_prefix_test where a = 1 and b = 2 and c is null and d is null
- hp_prefix_test_p4 | 1 | 2 |   |  
-
-select tableoid::regclass,* from hp_prefix_test where a is null and b is null and c = 3 and d is null
- hp_prefix_test_p3 |   |   | 3 |  
-
-select tableoid::regclass,* from hp_prefix_test where a = 1 and b is null and c = 3 and d is null
- hp_prefix_test_p7 | 1 |   | 3 |  
-
-select tableoid::regclass,* from hp_prefix_test where a is null and b = 2 and c = 3 and d is null
- hp_prefix_test_p4 |   | 2 | 3 |  
-
-select tableoid::regclass,* from hp_prefix_test where a = 1 and b = 2 and c = 3 and d is null
- hp_prefix_test_p5 | 1 | 2 | 3 |  
-
-select tableoid::regclass,* from hp_prefix_test where a is null and b is null and c is null and d = 4
- hp_prefix_test_p4 |   |   |   | 4
-
-select tableoid::regclass,* from hp_prefix_test where a = 1 and b is null and c is null and d = 4
- hp_prefix_test_p6 | 1 |   |   | 4
-
-select tableoid::regclass,* from hp_prefix_test where a is null and b = 2 and c is null and d = 4
- hp_prefix_test_p5 |   | 2 |   | 4
-
-select tableoid::regclass,* from hp_prefix_test where a = 1 and b = 2 and c is null and d = 4
- hp_prefix_test_p6 | 1 | 2 |   | 4
-
-select tableoid::regclass,* from hp_prefix_test where a is null and b is null and c = 3 and d = 4
- hp_prefix_test_p4 |   |   | 3 | 4
-
-select tableoid::regclass,* from hp_prefix_test where a = 1 and b is null and c = 3 and d = 4
- hp_prefix_test_p5 | 1 |   | 3 | 4
-
-select tableoid::regclass,* from hp_prefix_test where a is null and b = 2 and c = 3 and d = 4
- hp_prefix_test_p6 |   | 2 | 3 | 4
-
-select tableoid::regclass,* from hp_prefix_test where a = 1 and b = 2 and c = 3 and d = 4
- hp_prefix_test_p4 | 1 | 2 | 3 | 4
-
-\t off
-drop table hp_prefix_test;
---
--- Check that gen_partprune_steps() detects self-contradiction from clauses
--- regardless of the order of the clauses (Here we use a custom operator to
--- prevent the equivclass.c machinery from reordering the clauses)
---
-create operator === (
-   leftarg = int4,
-   rightarg = int4,
-   procedure = int4eq,
-   commutator = ===,
-   hashes
-);
-create operator class part_test_int4_ops2
-for type int4
-using hash as
-operator 1 ===,
-function 2 part_hashint4_noop(int4, int8);
-create table hp_contradict_test (a int, b int) partition by hash (a part_test_int4_ops2, b part_test_int4_ops2);
-create table hp_contradict_test_p1 partition of hp_contradict_test for values with (modulus 2, remainder 0);
-create table hp_contradict_test_p2 partition of hp_contradict_test for values with (modulus 2, remainder 1);
-explain (costs off) select * from hp_contradict_test where a is null and a === 1 and b === 1;
-        QUERY PLAN        
---------------------------
- Result
-   One-Time Filter: false
-(2 rows)
-
-explain (costs off) select * from hp_contradict_test where a === 1 and b === 1 and a is null;
-        QUERY PLAN        
---------------------------
- Result
-   One-Time Filter: false
-(2 rows)
-
-drop table hp_contradict_test;
-drop operator class part_test_int4_ops2 using hash;
-drop operator ===(int4, int4);
-drop function explain_analyze(text);
+psql: error: connection to server on socket "/tmp/f_SDOOqtof/.s.PGSQL.16412" failed: No such file or directory
+	Is the server running locally and accepting connections on that socket?
diff -U3 /tmp/cirrus-ci-build/src/test/regress/expected/reloptions.out /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/reloptions.out
--- /tmp/cirrus-ci-build/src/test/regress/expected/reloptions.out	2024-09-20 04:07:19.066837457 +0000
+++ /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/reloptions.out	2024-09-20 04:17:09.121564759 +0000
@@ -1,237 +1,2 @@
--- Simple create
-CREATE TABLE reloptions_test(i INT) WITH (FiLLFaCToR=30,
-	autovacuum_enabled = false, autovacuum_analyze_scale_factor = 0.2);
-SELECT reloptions FROM pg_class WHERE oid = 'reloptions_test'::regclass;
-                                  reloptions                                  
-------------------------------------------------------------------------------
- {fillfactor=30,autovacuum_enabled=false,autovacuum_analyze_scale_factor=0.2}
-(1 row)
-
--- Fail min/max values check
-CREATE TABLE reloptions_test2(i INT) WITH (fillfactor=2);
-ERROR:  value 2 out of bounds for option "fillfactor"
-DETAIL:  Valid values are between "10" and "100".
-CREATE TABLE reloptions_test2(i INT) WITH (fillfactor=110);
-ERROR:  value 110 out of bounds for option "fillfactor"
-DETAIL:  Valid values are between "10" and "100".
-CREATE TABLE reloptions_test2(i INT) WITH (autovacuum_analyze_scale_factor = -10.0);
-ERROR:  value -10.0 out of bounds for option "autovacuum_analyze_scale_factor"
-DETAIL:  Valid values are between "0.000000" and "100.000000".
-CREATE TABLE reloptions_test2(i INT) WITH (autovacuum_analyze_scale_factor = 110.0);
-ERROR:  value 110.0 out of bounds for option "autovacuum_analyze_scale_factor"
-DETAIL:  Valid values are between "0.000000" and "100.000000".
--- Fail when option and namespace do not exist
-CREATE TABLE reloptions_test2(i INT) WITH (not_existing_option=2);
-ERROR:  unrecognized parameter "not_existing_option"
-CREATE TABLE reloptions_test2(i INT) WITH (not_existing_namespace.fillfactor=2);
-ERROR:  unrecognized parameter namespace "not_existing_namespace"
--- Fail while setting improper values
-CREATE TABLE reloptions_test2(i INT) WITH (fillfactor=-30.1);
-ERROR:  value -30.1 out of bounds for option "fillfactor"
-DETAIL:  Valid values are between "10" and "100".
-CREATE TABLE reloptions_test2(i INT) WITH (fillfactor='string');
-ERROR:  invalid value for integer option "fillfactor": string
-CREATE TABLE reloptions_test2(i INT) WITH (fillfactor=true);
-ERROR:  invalid value for integer option "fillfactor": true
-CREATE TABLE reloptions_test2(i INT) WITH (autovacuum_enabled=12);
-ERROR:  invalid value for boolean option "autovacuum_enabled": 12
-CREATE TABLE reloptions_test2(i INT) WITH (autovacuum_enabled=30.5);
-ERROR:  invalid value for boolean option "autovacuum_enabled": 30.5
-CREATE TABLE reloptions_test2(i INT) WITH (autovacuum_enabled='string');
-ERROR:  invalid value for boolean option "autovacuum_enabled": string
-CREATE TABLE reloptions_test2(i INT) WITH (autovacuum_analyze_scale_factor='string');
-ERROR:  invalid value for floating point option "autovacuum_analyze_scale_factor": string
-CREATE TABLE reloptions_test2(i INT) WITH (autovacuum_analyze_scale_factor=true);
-ERROR:  invalid value for floating point option "autovacuum_analyze_scale_factor": true
--- Fail if option is specified twice
-CREATE TABLE reloptions_test2(i INT) WITH (fillfactor=30, fillfactor=40);
-ERROR:  parameter "fillfactor" specified more than once
--- Specifying name only for a non-Boolean option should fail
-CREATE TABLE reloptions_test2(i INT) WITH (fillfactor);
-ERROR:  invalid value for integer option "fillfactor": true
--- Simple ALTER TABLE
-ALTER TABLE reloptions_test SET (fillfactor=31,
-	autovacuum_analyze_scale_factor = 0.3);
-SELECT reloptions FROM pg_class WHERE oid = 'reloptions_test'::regclass;
-                                  reloptions                                  
-------------------------------------------------------------------------------
- {autovacuum_enabled=false,fillfactor=31,autovacuum_analyze_scale_factor=0.3}
-(1 row)
-
--- Set boolean option to true without specifying value
-ALTER TABLE reloptions_test SET (autovacuum_enabled, fillfactor=32);
-SELECT reloptions FROM pg_class WHERE oid = 'reloptions_test'::regclass;
-                                 reloptions                                  
------------------------------------------------------------------------------
- {autovacuum_analyze_scale_factor=0.3,autovacuum_enabled=true,fillfactor=32}
-(1 row)
-
--- Check that RESET works well
-ALTER TABLE reloptions_test RESET (fillfactor);
-SELECT reloptions FROM pg_class WHERE oid = 'reloptions_test'::regclass;
-                          reloptions                           
----------------------------------------------------------------
- {autovacuum_analyze_scale_factor=0.3,autovacuum_enabled=true}
-(1 row)
-
--- Resetting all values causes the column to become null
-ALTER TABLE reloptions_test RESET (autovacuum_enabled,
-	autovacuum_analyze_scale_factor);
-SELECT reloptions FROM pg_class WHERE oid = 'reloptions_test'::regclass AND
-       reloptions IS NULL;
- reloptions 
-------------
- 
-(1 row)
-
--- RESET fails if a value is specified
-ALTER TABLE reloptions_test RESET (fillfactor=12);
-ERROR:  RESET must not include values for parameters
--- We can RESET an invalid option which for some reason is already set
-UPDATE pg_class
-	SET reloptions = '{fillfactor=13,autovacuum_enabled=false,illegal_option=4}'
-	WHERE oid = 'reloptions_test'::regclass;
-ALTER TABLE reloptions_test RESET (illegal_option);
-SELECT reloptions FROM pg_class WHERE oid = 'reloptions_test'::regclass;
-                reloptions                
-------------------------------------------
- {fillfactor=13,autovacuum_enabled=false}
-(1 row)
-
--- Test vacuum_truncate option
-DROP TABLE reloptions_test;
-CREATE TEMP TABLE reloptions_test(i INT NOT NULL, j text)
-	WITH (vacuum_truncate=false,
-	toast.vacuum_truncate=false,
-	autovacuum_enabled=false);
-SELECT reloptions FROM pg_class WHERE oid = 'reloptions_test'::regclass;
-                    reloptions                    
---------------------------------------------------
- {vacuum_truncate=false,autovacuum_enabled=false}
-(1 row)
-
-INSERT INTO reloptions_test VALUES (1, NULL), (NULL, NULL);
-ERROR:  null value in column "i" of relation "reloptions_test" violates not-null constraint
-DETAIL:  Failing row contains (null, null).
--- Do an aggressive vacuum to prevent page-skipping.
-VACUUM (FREEZE, DISABLE_PAGE_SKIPPING) reloptions_test;
-SELECT pg_relation_size('reloptions_test') > 0;
- ?column? 
-----------
- t
-(1 row)
-
-SELECT reloptions FROM pg_class WHERE oid =
-	(SELECT reltoastrelid FROM pg_class
-	WHERE oid = 'reloptions_test'::regclass);
-       reloptions        
--------------------------
- {vacuum_truncate=false}
-(1 row)
-
-ALTER TABLE reloptions_test RESET (vacuum_truncate);
-SELECT reloptions FROM pg_class WHERE oid = 'reloptions_test'::regclass;
-         reloptions         
-----------------------------
- {autovacuum_enabled=false}
-(1 row)
-
-INSERT INTO reloptions_test VALUES (1, NULL), (NULL, NULL);
-ERROR:  null value in column "i" of relation "reloptions_test" violates not-null constraint
-DETAIL:  Failing row contains (null, null).
--- Do an aggressive vacuum to prevent page-skipping.
-VACUUM (FREEZE, DISABLE_PAGE_SKIPPING) reloptions_test;
-SELECT pg_relation_size('reloptions_test') = 0;
- ?column? 
-----------
- t
-(1 row)
-
--- Test toast.* options
-DROP TABLE reloptions_test;
-CREATE TABLE reloptions_test (s VARCHAR)
-	WITH (toast.autovacuum_vacuum_cost_delay = 23);
-SELECT reltoastrelid as toast_oid
-	FROM pg_class WHERE oid = 'reloptions_test'::regclass \gset
-SELECT reloptions FROM pg_class WHERE oid = :toast_oid;
-            reloptions             
------------------------------------
- {autovacuum_vacuum_cost_delay=23}
-(1 row)
-
-ALTER TABLE reloptions_test SET (toast.autovacuum_vacuum_cost_delay = 24);
-SELECT reloptions FROM pg_class WHERE oid = :toast_oid;
-            reloptions             
------------------------------------
- {autovacuum_vacuum_cost_delay=24}
-(1 row)
-
-ALTER TABLE reloptions_test RESET (toast.autovacuum_vacuum_cost_delay);
-SELECT reloptions FROM pg_class WHERE oid = :toast_oid;
- reloptions 
-------------
- 
-(1 row)
-
--- Fail on non-existent options in toast namespace
-CREATE TABLE reloptions_test2 (i int) WITH (toast.not_existing_option = 42);
-ERROR:  unrecognized parameter "not_existing_option"
--- Mix TOAST & heap
-DROP TABLE reloptions_test;
-CREATE TABLE reloptions_test (s VARCHAR) WITH
-	(toast.autovacuum_vacuum_cost_delay = 23,
-	autovacuum_vacuum_cost_delay = 24, fillfactor = 40);
-SELECT reloptions FROM pg_class WHERE oid = 'reloptions_test'::regclass;
-                   reloptions                    
--------------------------------------------------
- {autovacuum_vacuum_cost_delay=24,fillfactor=40}
-(1 row)
-
-SELECT reloptions FROM pg_class WHERE oid = (
-	SELECT reltoastrelid FROM pg_class WHERE oid = 'reloptions_test'::regclass);
-            reloptions             
------------------------------------
- {autovacuum_vacuum_cost_delay=23}
-(1 row)
-
---
--- CREATE INDEX, ALTER INDEX for btrees
---
-CREATE INDEX reloptions_test_idx ON reloptions_test (s) WITH (fillfactor=30);
-SELECT reloptions FROM pg_class WHERE oid = 'reloptions_test_idx'::regclass;
-   reloptions    
------------------
- {fillfactor=30}
-(1 row)
-
--- Fail when option and namespace do not exist
-CREATE INDEX reloptions_test_idx ON reloptions_test (s)
-	WITH (not_existing_option=2);
-ERROR:  unrecognized parameter "not_existing_option"
-CREATE INDEX reloptions_test_idx ON reloptions_test (s)
-	WITH (not_existing_ns.fillfactor=2);
-ERROR:  unrecognized parameter namespace "not_existing_ns"
--- Check allowed ranges
-CREATE INDEX reloptions_test_idx2 ON reloptions_test (s) WITH (fillfactor=1);
-ERROR:  value 1 out of bounds for option "fillfactor"
-DETAIL:  Valid values are between "10" and "100".
-CREATE INDEX reloptions_test_idx2 ON reloptions_test (s) WITH (fillfactor=130);
-ERROR:  value 130 out of bounds for option "fillfactor"
-DETAIL:  Valid values are between "10" and "100".
--- Check ALTER
-ALTER INDEX reloptions_test_idx SET (fillfactor=40);
-SELECT reloptions FROM pg_class WHERE oid = 'reloptions_test_idx'::regclass;
-   reloptions    
------------------
- {fillfactor=40}
-(1 row)
-
--- Check ALTER on empty reloption list
-CREATE INDEX reloptions_test_idx3 ON reloptions_test (s);
-ALTER INDEX reloptions_test_idx3 SET (fillfactor=40);
-SELECT reloptions FROM pg_class WHERE oid = 'reloptions_test_idx3'::regclass;
-   reloptions    
------------------
- {fillfactor=40}
-(1 row)
-
+psql: error: connection to server on socket "/tmp/f_SDOOqtof/.s.PGSQL.16412" failed: No such file or directory
+	Is the server running locally and accepting connections on that socket?
diff -U3 /tmp/cirrus-ci-build/src/test/regress/expected/hash_part.out /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/hash_part.out
--- /tmp/cirrus-ci-build/src/test/regress/expected/hash_part.out	2024-09-20 04:07:19.022746235 +0000
+++ /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/hash_part.out	2024-09-20 04:17:09.161564720 +0000
@@ -1,114 +1,2 @@
---
--- Hash partitioning.
---
--- Use hand-rolled hash functions and operator classes to get predictable
--- result on different machines.  See the definitions of
--- part_test_int4_ops and part_test_text_ops in test_setup.sql.
-CREATE TABLE mchash (a int, b text, c jsonb)
-  PARTITION BY HASH (a part_test_int4_ops, b part_test_text_ops);
-CREATE TABLE mchash1
-  PARTITION OF mchash FOR VALUES WITH (MODULUS 4, REMAINDER 0);
--- invalid OID, no such table
-SELECT satisfies_hash_partition(0, 4, 0, NULL);
-ERROR:  could not open relation with OID 0
--- not partitioned
-SELECT satisfies_hash_partition('tenk1'::regclass, 4, 0, NULL);
-ERROR:  "tenk1" is not a hash partitioned table
--- partition rather than the parent
-SELECT satisfies_hash_partition('mchash1'::regclass, 4, 0, NULL);
-ERROR:  "mchash1" is not a hash partitioned table
--- invalid modulus
-SELECT satisfies_hash_partition('mchash'::regclass, 0, 0, NULL);
-ERROR:  modulus for hash partition must be an integer value greater than zero
--- remainder too small
-SELECT satisfies_hash_partition('mchash'::regclass, 1, -1, NULL);
-ERROR:  remainder for hash partition must be an integer value greater than or equal to zero
--- remainder too large
-SELECT satisfies_hash_partition('mchash'::regclass, 1, 1, NULL);
-ERROR:  remainder for hash partition must be less than modulus
--- modulus is null
-SELECT satisfies_hash_partition('mchash'::regclass, NULL, 0, NULL);
- satisfies_hash_partition 
---------------------------
- f
-(1 row)
-
--- remainder is null
-SELECT satisfies_hash_partition('mchash'::regclass, 4, NULL, NULL);
- satisfies_hash_partition 
---------------------------
- f
-(1 row)
-
--- too many arguments
-SELECT satisfies_hash_partition('mchash'::regclass, 4, 0, NULL::int, NULL::text, NULL::json);
-ERROR:  number of partitioning columns (2) does not match number of partition keys provided (3)
--- too few arguments
-SELECT satisfies_hash_partition('mchash'::regclass, 3, 1, NULL::int);
-ERROR:  number of partitioning columns (2) does not match number of partition keys provided (1)
--- wrong argument type
-SELECT satisfies_hash_partition('mchash'::regclass, 2, 1, NULL::int, NULL::int);
-ERROR:  column 2 of the partition key has type text, but supplied value is of type integer
--- ok, should be false
-SELECT satisfies_hash_partition('mchash'::regclass, 4, 0, 0, ''::text);
- satisfies_hash_partition 
---------------------------
- f
-(1 row)
-
--- ok, should be true
-SELECT satisfies_hash_partition('mchash'::regclass, 4, 0, 2, ''::text);
- satisfies_hash_partition 
---------------------------
- t
-(1 row)
-
--- argument via variadic syntax, should fail because not all partitioning
--- columns are of the correct type
-SELECT satisfies_hash_partition('mchash'::regclass, 2, 1,
-								variadic array[1,2]::int[]);
-ERROR:  column 2 of the partition key has type "text", but supplied value is of type "integer"
--- multiple partitioning columns of the same type
-CREATE TABLE mcinthash (a int, b int, c jsonb)
-  PARTITION BY HASH (a part_test_int4_ops, b part_test_int4_ops);
--- now variadic should work, should be false
-SELECT satisfies_hash_partition('mcinthash'::regclass, 4, 0,
-								variadic array[0, 0]);
- satisfies_hash_partition 
---------------------------
- f
-(1 row)
-
--- should be true
-SELECT satisfies_hash_partition('mcinthash'::regclass, 4, 0,
-								variadic array[0, 1]);
- satisfies_hash_partition 
---------------------------
- t
-(1 row)
-
--- wrong length
-SELECT satisfies_hash_partition('mcinthash'::regclass, 4, 0,
-								variadic array[]::int[]);
-ERROR:  number of partitioning columns (2) does not match number of partition keys provided (0)
--- wrong type
-SELECT satisfies_hash_partition('mcinthash'::regclass, 4, 0,
-								variadic array[now(), now()]);
-ERROR:  column 1 of the partition key has type "integer", but supplied value is of type "timestamp with time zone"
--- check satisfies_hash_partition passes correct collation
-create table text_hashp (a text) partition by hash (a);
-create table text_hashp0 partition of text_hashp for values with (modulus 2, remainder 0);
-create table text_hashp1 partition of text_hashp for values with (modulus 2, remainder 1);
--- The result here should always be true, because 'xxx' must belong to
--- one of the two defined partitions
-select satisfies_hash_partition('text_hashp'::regclass, 2, 0, 'xxx'::text) OR
-	   satisfies_hash_partition('text_hashp'::regclass, 2, 1, 'xxx'::text) AS satisfies;
- satisfies 
------------
- t
-(1 row)
-
--- cleanup
-DROP TABLE mchash;
-DROP TABLE mcinthash;
-DROP TABLE text_hashp;
+psql: error: connection to server on socket "/tmp/f_SDOOqtof/.s.PGSQL.16412" failed: No such file or directory
+	Is the server running locally and accepting connections on that socket?
diff -U3 /tmp/cirrus-ci-build/src/test/regress/expected/indexing.out /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/indexing.out
--- /tmp/cirrus-ci-build/src/test/regress/expected/indexing.out	2024-09-20 04:07:19.022746235 +0000
+++ /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/indexing.out	2024-09-20 04:17:09.153564728 +0000
@@ -1,1642 +1,2 @@
--- Creating an index on a partitioned table makes the partitions
--- automatically get the index
-create table idxpart (a int, b int, c text) partition by range (a);
--- relhassubclass of a partitioned index is false before creating any partition.
--- It will be set after the first partition is created.
-create index idxpart_idx on idxpart (a);
-select relhassubclass from pg_class where relname = 'idxpart_idx';
- relhassubclass 
-----------------
- f
-(1 row)
-
--- Check that partitioned indexes are present in pg_indexes.
-select indexdef from pg_indexes where indexname like 'idxpart_idx%';
-                            indexdef                             
------------------------------------------------------------------
- CREATE INDEX idxpart_idx ON ONLY public.idxpart USING btree (a)
-(1 row)
-
-drop index idxpart_idx;
-create table idxpart1 partition of idxpart for values from (0) to (10);
-create table idxpart2 partition of idxpart for values from (10) to (100)
-	partition by range (b);
-create table idxpart21 partition of idxpart2 for values from (0) to (100);
--- Even with partitions, relhassubclass should not be set if a partitioned
--- index is created only on the parent.
-create index idxpart_idx on only idxpart(a);
-select relhassubclass from pg_class where relname = 'idxpart_idx';
- relhassubclass 
-----------------
- f
-(1 row)
-
-drop index idxpart_idx;
-create index on idxpart (a);
-select relname, relkind, relhassubclass, inhparent::regclass
-    from pg_class left join pg_index ix on (indexrelid = oid)
-	left join pg_inherits on (ix.indexrelid = inhrelid)
-	where relname like 'idxpart%' order by relname;
-     relname     | relkind | relhassubclass |   inhparent    
------------------+---------+----------------+----------------
- idxpart         | p       | t              | 
- idxpart1        | r       | f              | 
- idxpart1_a_idx  | i       | f              | idxpart_a_idx
- idxpart2        | p       | t              | 
- idxpart21       | r       | f              | 
- idxpart21_a_idx | i       | f              | idxpart2_a_idx
- idxpart2_a_idx  | I       | t              | idxpart_a_idx
- idxpart_a_idx   | I       | t              | 
-(8 rows)
-
-drop table idxpart;
--- Some unsupported features
-create table idxpart (a int, b int, c text) partition by range (a);
-create table idxpart1 partition of idxpart for values from (0) to (10);
-create index concurrently on idxpart (a);
-ERROR:  cannot create index on partitioned table "idxpart" concurrently
-drop table idxpart;
--- Verify bugfix with query on indexed partitioned table with no partitions
--- https://postgr.es/m/20180124162006.pmapfiznhgngwtjf@alvherre.pgsql
-CREATE TABLE idxpart (col1 INT) PARTITION BY RANGE (col1);
-CREATE INDEX ON idxpart (col1);
-CREATE TABLE idxpart_two (col2 INT);
-SELECT col2 FROM idxpart_two fk LEFT OUTER JOIN idxpart pk ON (col1 = col2);
- col2 
-------
-(0 rows)
-
-DROP table idxpart, idxpart_two;
--- Verify bugfix with index rewrite on ALTER TABLE / SET DATA TYPE
--- https://postgr.es/m/CAKcux6mxNCGsgATwf5CGMF8g4WSupCXicCVMeKUTuWbyxHOMsQ@mail.gmail.com
-CREATE TABLE idxpart (a INT, b TEXT, c INT) PARTITION BY RANGE(a);
-CREATE TABLE idxpart1 PARTITION OF idxpart FOR VALUES FROM (MINVALUE) TO (MAXVALUE);
-CREATE INDEX partidx_abc_idx ON idxpart (a, b, c);
-INSERT INTO idxpart (a, b, c) SELECT i, i, i FROM generate_series(1, 50) i;
-ALTER TABLE idxpart ALTER COLUMN c TYPE numeric;
-DROP TABLE idxpart;
--- If a table without index is attached as partition to a table with
--- an index, the index is automatically created
-create table idxpart (a int, b int, c text) partition by range (a);
-create index idxparti on idxpart (a);
-create index idxparti2 on idxpart (b, c);
-create table idxpart1 (like idxpart);
-\d idxpart1
-              Table "public.idxpart1"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           |          | 
- b      | integer |           |          | 
- c      | text    |           |          | 
-
-alter table idxpart attach partition idxpart1 for values from (0) to (10);
-\d idxpart1
-              Table "public.idxpart1"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           |          | 
- b      | integer |           |          | 
- c      | text    |           |          | 
-Partition of: idxpart FOR VALUES FROM (0) TO (10)
-Indexes:
-    "idxpart1_a_idx" btree (a)
-    "idxpart1_b_c_idx" btree (b, c)
-
-\d+ idxpart1_a_idx
-                 Index "public.idxpart1_a_idx"
- Column |  Type   | Key? | Definition | Storage | Stats target 
---------+---------+------+------------+---------+--------------
- a      | integer | yes  | a          | plain   | 
-Partition of: idxparti 
-No partition constraint
-btree, for table "public.idxpart1"
-
-\d+ idxpart1_b_c_idx
-                Index "public.idxpart1_b_c_idx"
- Column |  Type   | Key? | Definition | Storage  | Stats target 
---------+---------+------+------------+----------+--------------
- b      | integer | yes  | b          | plain    | 
- c      | text    | yes  | c          | extended | 
-Partition of: idxparti2 
-No partition constraint
-btree, for table "public.idxpart1"
-
--- Forbid ALTER TABLE when attaching or detaching an index to a partition.
-create index idxpart_c on only idxpart (c);
-create index idxpart1_c on idxpart1 (c);
-alter table idxpart_c attach partition idxpart1_c for values from (10) to (20);
-ERROR:  "idxpart_c" is not a partitioned table
-alter index idxpart_c attach partition idxpart1_c;
-select relname, relpartbound from pg_class
-  where relname in ('idxpart_c', 'idxpart1_c')
-  order by relname;
-  relname   | relpartbound 
-------------+--------------
- idxpart1_c | 
- idxpart_c  | 
-(2 rows)
-
-alter table idxpart_c detach partition idxpart1_c;
-ERROR:  ALTER action DETACH PARTITION cannot be performed on relation "idxpart_c"
-DETAIL:  This operation is not supported for partitioned indexes.
-drop table idxpart;
--- If a partition already has an index, don't create a duplicative one
-create table idxpart (a int, b int) partition by range (a, b);
-create table idxpart1 partition of idxpart for values from (0, 0) to (10, 10);
-create index on idxpart1 (a, b);
-create index on idxpart (a, b);
-\d idxpart1
-              Table "public.idxpart1"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           |          | 
- b      | integer |           |          | 
-Partition of: idxpart FOR VALUES FROM (0, 0) TO (10, 10)
-Indexes:
-    "idxpart1_a_b_idx" btree (a, b)
-
-select relname, relkind, relhassubclass, inhparent::regclass
-    from pg_class left join pg_index ix on (indexrelid = oid)
-	left join pg_inherits on (ix.indexrelid = inhrelid)
-	where relname like 'idxpart%' order by relname;
-     relname      | relkind | relhassubclass |    inhparent    
-------------------+---------+----------------+-----------------
- idxpart          | p       | t              | 
- idxpart1         | r       | f              | 
- idxpart1_a_b_idx | i       | f              | idxpart_a_b_idx
- idxpart_a_b_idx  | I       | t              | 
-(4 rows)
-
-drop table idxpart;
--- DROP behavior for partitioned indexes
-create table idxpart (a int) partition by range (a);
-create index on idxpart (a);
-create table idxpart1 partition of idxpart for values from (0) to (10);
-drop index idxpart1_a_idx;	-- no way
-ERROR:  cannot drop index idxpart1_a_idx because index idxpart_a_idx requires it
-HINT:  You can drop index idxpart_a_idx instead.
-drop index concurrently idxpart_a_idx;	-- unsupported
-ERROR:  cannot drop partitioned index "idxpart_a_idx" concurrently
-drop index idxpart_a_idx;	-- both indexes go away
-select relname, relkind from pg_class
-  where relname like 'idxpart%' order by relname;
- relname  | relkind 
-----------+---------
- idxpart  | p
- idxpart1 | r
-(2 rows)
-
-create index on idxpart (a);
-drop table idxpart1;		-- the index on partition goes away too
-select relname, relkind from pg_class
-  where relname like 'idxpart%' order by relname;
-    relname    | relkind 
----------------+---------
- idxpart       | p
- idxpart_a_idx | I
-(2 rows)
-
-drop table idxpart;
--- DROP behavior with temporary partitioned indexes
-create temp table idxpart_temp (a int) partition by range (a);
-create index on idxpart_temp(a);
-create temp table idxpart1_temp partition of idxpart_temp
-  for values from (0) to (10);
-drop index idxpart1_temp_a_idx; -- error
-ERROR:  cannot drop index idxpart1_temp_a_idx because index idxpart_temp_a_idx requires it
-HINT:  You can drop index idxpart_temp_a_idx instead.
--- non-concurrent drop is enforced here, so it is a valid case.
-drop index concurrently idxpart_temp_a_idx;
-select relname, relkind from pg_class
-  where relname like 'idxpart_temp%' order by relname;
-   relname    | relkind 
---------------+---------
- idxpart_temp | p
-(1 row)
-
-drop table idxpart_temp;
--- ALTER INDEX .. ATTACH, error cases
-create table idxpart (a int, b int) partition by range (a, b);
-create table idxpart1 partition of idxpart for values from (0, 0) to (10, 10);
-create index idxpart_a_b_idx on only idxpart (a, b);
-create index idxpart1_a_b_idx on idxpart1 (a, b);
-create index idxpart1_tst1 on idxpart1 (b, a);
-create index idxpart1_tst2 on idxpart1 using hash (a);
-create index idxpart1_tst3 on idxpart1 (a, b) where a > 10;
-alter index idxpart attach partition idxpart1;
-ERROR:  "idxpart" is not an index
-alter index idxpart_a_b_idx attach partition idxpart1;
-ERROR:  "idxpart1" is not an index
-alter index idxpart_a_b_idx attach partition idxpart_a_b_idx;
-ERROR:  cannot attach index "idxpart_a_b_idx" as a partition of index "idxpart_a_b_idx"
-DETAIL:  Index "idxpart_a_b_idx" is not an index on any partition of table "idxpart".
-alter index idxpart_a_b_idx attach partition idxpart1_b_idx;
-ERROR:  relation "idxpart1_b_idx" does not exist
-alter index idxpart_a_b_idx attach partition idxpart1_tst1;
-ERROR:  cannot attach index "idxpart1_tst1" as a partition of index "idxpart_a_b_idx"
-DETAIL:  The index definitions do not match.
-alter index idxpart_a_b_idx attach partition idxpart1_tst2;
-ERROR:  cannot attach index "idxpart1_tst2" as a partition of index "idxpart_a_b_idx"
-DETAIL:  The index definitions do not match.
-alter index idxpart_a_b_idx attach partition idxpart1_tst3;
-ERROR:  cannot attach index "idxpart1_tst3" as a partition of index "idxpart_a_b_idx"
-DETAIL:  The index definitions do not match.
--- OK
-alter index idxpart_a_b_idx attach partition idxpart1_a_b_idx;
-alter index idxpart_a_b_idx attach partition idxpart1_a_b_idx; -- quiet
--- reject dupe
-create index idxpart1_2_a_b on idxpart1 (a, b);
-alter index idxpart_a_b_idx attach partition idxpart1_2_a_b;
-ERROR:  cannot attach index "idxpart1_2_a_b" as a partition of index "idxpart_a_b_idx"
-DETAIL:  Another index is already attached for partition "idxpart1".
-drop table idxpart;
--- make sure everything's gone
-select indexrelid::regclass, indrelid::regclass
-  from pg_index where indexrelid::regclass::text like 'idxpart%';
- indexrelid | indrelid 
-------------+----------
-(0 rows)
-
--- Don't auto-attach incompatible indexes
-create table idxpart (a int, b int) partition by range (a);
-create table idxpart1 (a int, b int);
-create index on idxpart1 using hash (a);
-create index on idxpart1 (a) where b > 1;
-create index on idxpart1 ((a + 0));
-create index on idxpart1 (a, a);
-create index on idxpart (a);
-alter table idxpart attach partition idxpart1 for values from (0) to (1000);
-\d idxpart1
-              Table "public.idxpart1"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           |          | 
- b      | integer |           |          | 
-Partition of: idxpart FOR VALUES FROM (0) TO (1000)
-Indexes:
-    "idxpart1_a_a1_idx" btree (a, a)
-    "idxpart1_a_idx" hash (a)
-    "idxpart1_a_idx1" btree (a) WHERE b > 1
-    "idxpart1_a_idx2" btree (a)
-    "idxpart1_expr_idx" btree ((a + 0))
-
-drop table idxpart;
--- If CREATE INDEX ONLY, don't create indexes on partitions; and existing
--- indexes on partitions don't change parent.  ALTER INDEX ATTACH can change
--- the parent after the fact.
-create table idxpart (a int) partition by range (a);
-create table idxpart1 partition of idxpart for values from (0) to (100);
-create table idxpart2 partition of idxpart for values from (100) to (1000)
-  partition by range (a);
-create table idxpart21 partition of idxpart2 for values from (100) to (200);
-create table idxpart22 partition of idxpart2 for values from (200) to (300);
-create index on idxpart22 (a);
-create index on only idxpart2 (a);
-create index on idxpart (a);
--- Here we expect that idxpart1 and idxpart2 have a new index, but idxpart21
--- does not; also, idxpart22 is not attached.
-\d idxpart1
-              Table "public.idxpart1"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           |          | 
-Partition of: idxpart FOR VALUES FROM (0) TO (100)
-Indexes:
-    "idxpart1_a_idx" btree (a)
-
-\d idxpart2
-        Partitioned table "public.idxpart2"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           |          | 
-Partition of: idxpart FOR VALUES FROM (100) TO (1000)
-Partition key: RANGE (a)
-Indexes:
-    "idxpart2_a_idx" btree (a) INVALID
-Number of partitions: 2 (Use \d+ to list them.)
-
-\d idxpart21
-             Table "public.idxpart21"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           |          | 
-Partition of: idxpart2 FOR VALUES FROM (100) TO (200)
-
-select indexrelid::regclass, indrelid::regclass, inhparent::regclass
-  from pg_index idx left join pg_inherits inh on (idx.indexrelid = inh.inhrelid)
-where indexrelid::regclass::text like 'idxpart%'
-  order by indexrelid::regclass::text collate "C";
-   indexrelid    | indrelid  |   inhparent   
------------------+-----------+---------------
- idxpart1_a_idx  | idxpart1  | idxpart_a_idx
- idxpart22_a_idx | idxpart22 | 
- idxpart2_a_idx  | idxpart2  | idxpart_a_idx
- idxpart_a_idx   | idxpart   | 
-(4 rows)
-
-alter index idxpart2_a_idx attach partition idxpart22_a_idx;
-select indexrelid::regclass, indrelid::regclass, inhparent::regclass
-  from pg_index idx left join pg_inherits inh on (idx.indexrelid = inh.inhrelid)
-where indexrelid::regclass::text like 'idxpart%'
-  order by indexrelid::regclass::text collate "C";
-   indexrelid    | indrelid  |   inhparent    
------------------+-----------+----------------
- idxpart1_a_idx  | idxpart1  | idxpart_a_idx
- idxpart22_a_idx | idxpart22 | idxpart2_a_idx
- idxpart2_a_idx  | idxpart2  | idxpart_a_idx
- idxpart_a_idx   | idxpart   | 
-(4 rows)
-
--- attaching idxpart22 is not enough to set idxpart22_a_idx valid ...
-alter index idxpart2_a_idx attach partition idxpart22_a_idx;
-\d idxpart2
-        Partitioned table "public.idxpart2"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           |          | 
-Partition of: idxpart FOR VALUES FROM (100) TO (1000)
-Partition key: RANGE (a)
-Indexes:
-    "idxpart2_a_idx" btree (a) INVALID
-Number of partitions: 2 (Use \d+ to list them.)
-
--- ... but this one is.
-create index on idxpart21 (a);
-alter index idxpart2_a_idx attach partition idxpart21_a_idx;
-\d idxpart2
-        Partitioned table "public.idxpart2"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           |          | 
-Partition of: idxpart FOR VALUES FROM (100) TO (1000)
-Partition key: RANGE (a)
-Indexes:
-    "idxpart2_a_idx" btree (a)
-Number of partitions: 2 (Use \d+ to list them.)
-
-drop table idxpart;
--- When a table is attached a partition and it already has an index, a
--- duplicate index should not get created, but rather the index becomes
--- attached to the parent's index.
-create table idxpart (a int, b int, c text, d bool) partition by range (a);
-create index idxparti on idxpart (a);
-create index idxparti2 on idxpart (b, c);
-create table idxpart1 (like idxpart including indexes);
-\d idxpart1
-              Table "public.idxpart1"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           |          | 
- b      | integer |           |          | 
- c      | text    |           |          | 
- d      | boolean |           |          | 
-Indexes:
-    "idxpart1_a_idx" btree (a)
-    "idxpart1_b_c_idx" btree (b, c)
-
-select relname, relkind, inhparent::regclass
-    from pg_class left join pg_index ix on (indexrelid = oid)
-	left join pg_inherits on (ix.indexrelid = inhrelid)
-	where relname like 'idxpart%' order by relname;
-     relname      | relkind | inhparent 
-------------------+---------+-----------
- idxpart          | p       | 
- idxpart1         | r       | 
- idxpart1_a_idx   | i       | 
- idxpart1_b_c_idx | i       | 
- idxparti         | I       | 
- idxparti2        | I       | 
-(6 rows)
-
-alter table idxpart attach partition idxpart1 for values from (0) to (10);
-\d idxpart1
-              Table "public.idxpart1"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           |          | 
- b      | integer |           |          | 
- c      | text    |           |          | 
- d      | boolean |           |          | 
-Partition of: idxpart FOR VALUES FROM (0) TO (10)
-Indexes:
-    "idxpart1_a_idx" btree (a)
-    "idxpart1_b_c_idx" btree (b, c)
-
-select relname, relkind, inhparent::regclass
-    from pg_class left join pg_index ix on (indexrelid = oid)
-	left join pg_inherits on (ix.indexrelid = inhrelid)
-	where relname like 'idxpart%' order by relname;
-     relname      | relkind | inhparent 
-------------------+---------+-----------
- idxpart          | p       | 
- idxpart1         | r       | 
- idxpart1_a_idx   | i       | idxparti
- idxpart1_b_c_idx | i       | idxparti2
- idxparti         | I       | 
- idxparti2        | I       | 
-(6 rows)
-
--- While here, also check matching when creating an index after the fact.
-create index on idxpart1 ((a+b)) where d = true;
-\d idxpart1
-              Table "public.idxpart1"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           |          | 
- b      | integer |           |          | 
- c      | text    |           |          | 
- d      | boolean |           |          | 
-Partition of: idxpart FOR VALUES FROM (0) TO (10)
-Indexes:
-    "idxpart1_a_idx" btree (a)
-    "idxpart1_b_c_idx" btree (b, c)
-    "idxpart1_expr_idx" btree ((a + b)) WHERE d = true
-
-select relname, relkind, inhparent::regclass
-    from pg_class left join pg_index ix on (indexrelid = oid)
-	left join pg_inherits on (ix.indexrelid = inhrelid)
-	where relname like 'idxpart%' order by relname;
-      relname      | relkind | inhparent 
--------------------+---------+-----------
- idxpart           | p       | 
- idxpart1          | r       | 
- idxpart1_a_idx    | i       | idxparti
- idxpart1_b_c_idx  | i       | idxparti2
- idxpart1_expr_idx | i       | 
- idxparti          | I       | 
- idxparti2         | I       | 
-(7 rows)
-
-create index idxparti3 on idxpart ((a+b)) where d = true;
-\d idxpart1
-              Table "public.idxpart1"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           |          | 
- b      | integer |           |          | 
- c      | text    |           |          | 
- d      | boolean |           |          | 
-Partition of: idxpart FOR VALUES FROM (0) TO (10)
-Indexes:
-    "idxpart1_a_idx" btree (a)
-    "idxpart1_b_c_idx" btree (b, c)
-    "idxpart1_expr_idx" btree ((a + b)) WHERE d = true
-
-select relname, relkind, inhparent::regclass
-    from pg_class left join pg_index ix on (indexrelid = oid)
-	left join pg_inherits on (ix.indexrelid = inhrelid)
-	where relname like 'idxpart%' order by relname;
-      relname      | relkind | inhparent 
--------------------+---------+-----------
- idxpart           | p       | 
- idxpart1          | r       | 
- idxpart1_a_idx    | i       | idxparti
- idxpart1_b_c_idx  | i       | idxparti2
- idxpart1_expr_idx | i       | idxparti3
- idxparti          | I       | 
- idxparti2         | I       | 
- idxparti3         | I       | 
-(8 rows)
-
-drop table idxpart;
--- Verify that attaching an invalid index does not mark the parent index valid.
--- On the other hand, attaching a valid index marks not only its direct
--- ancestor valid, but also any indirect ancestor that was only missing the one
--- that was just made valid
-create table idxpart (a int, b int) partition by range (a);
-create table idxpart1 partition of idxpart for values from (1) to (1000) partition by range (a);
-create table idxpart11 partition of idxpart1 for values from (1) to (100);
-create index on only idxpart1 (a);
-create index on only idxpart (a);
--- this results in two invalid indexes:
-select relname, indisvalid from pg_class join pg_index on indexrelid = oid
-   where relname like 'idxpart%' order by relname;
-    relname     | indisvalid 
-----------------+------------
- idxpart1_a_idx | f
- idxpart_a_idx  | f
-(2 rows)
-
--- idxpart1_a_idx is not valid, so idxpart_a_idx should not become valid:
-alter index idxpart_a_idx attach partition idxpart1_a_idx;
-select relname, indisvalid from pg_class join pg_index on indexrelid = oid
-   where relname like 'idxpart%' order by relname;
-    relname     | indisvalid 
-----------------+------------
- idxpart1_a_idx | f
- idxpart_a_idx  | f
-(2 rows)
-
--- after creating and attaching this, both idxpart1_a_idx and idxpart_a_idx
--- should become valid
-create index on idxpart11 (a);
-alter index idxpart1_a_idx attach partition idxpart11_a_idx;
-select relname, indisvalid from pg_class join pg_index on indexrelid = oid
-   where relname like 'idxpart%' order by relname;
-     relname     | indisvalid 
------------------+------------
- idxpart11_a_idx | t
- idxpart1_a_idx  | t
- idxpart_a_idx   | t
-(3 rows)
-
-drop table idxpart;
--- verify dependency handling during ALTER TABLE DETACH PARTITION
-create table idxpart (a int) partition by range (a);
-create table idxpart1 (like idxpart);
-create index on idxpart1 (a);
-create index on idxpart (a);
-create table idxpart2 (like idxpart);
-alter table idxpart attach partition idxpart1 for values from (0000) to (1000);
-alter table idxpart attach partition idxpart2 for values from (1000) to (2000);
-create table idxpart3 partition of idxpart for values from (2000) to (3000);
-select relname, relkind from pg_class where relname like 'idxpart%' order by relname;
-    relname     | relkind 
-----------------+---------
- idxpart        | p
- idxpart1       | r
- idxpart1_a_idx | i
- idxpart2       | r
- idxpart2_a_idx | i
- idxpart3       | r
- idxpart3_a_idx | i
- idxpart_a_idx  | I
-(8 rows)
-
--- a) after detaching partitions, the indexes can be dropped independently
-alter table idxpart detach partition idxpart1;
-alter table idxpart detach partition idxpart2;
-alter table idxpart detach partition idxpart3;
-drop index idxpart1_a_idx;
-drop index idxpart2_a_idx;
-drop index idxpart3_a_idx;
-select relname, relkind from pg_class where relname like 'idxpart%' order by relname;
-    relname    | relkind 
----------------+---------
- idxpart       | p
- idxpart1      | r
- idxpart2      | r
- idxpart3      | r
- idxpart_a_idx | I
-(5 rows)
-
-drop table idxpart, idxpart1, idxpart2, idxpart3;
-select relname, relkind from pg_class where relname like 'idxpart%' order by relname;
- relname | relkind 
----------+---------
-(0 rows)
-
-create table idxpart (a int) partition by range (a);
-create table idxpart1 (like idxpart);
-create index on idxpart1 (a);
-create index on idxpart (a);
-create table idxpart2 (like idxpart);
-alter table idxpart attach partition idxpart1 for values from (0000) to (1000);
-alter table idxpart attach partition idxpart2 for values from (1000) to (2000);
-create table idxpart3 partition of idxpart for values from (2000) to (3000);
--- b) after detaching, dropping the index on parent does not remove the others
-select relname, relkind from pg_class where relname like 'idxpart%' order by relname;
-    relname     | relkind 
-----------------+---------
- idxpart        | p
- idxpart1       | r
- idxpart1_a_idx | i
- idxpart2       | r
- idxpart2_a_idx | i
- idxpart3       | r
- idxpart3_a_idx | i
- idxpart_a_idx  | I
-(8 rows)
-
-alter table idxpart detach partition idxpart1;
-alter table idxpart detach partition idxpart2;
-alter table idxpart detach partition idxpart3;
-drop index idxpart_a_idx;
-select relname, relkind from pg_class where relname like 'idxpart%' order by relname;
-    relname     | relkind 
-----------------+---------
- idxpart        | p
- idxpart1       | r
- idxpart1_a_idx | i
- idxpart2       | r
- idxpart2_a_idx | i
- idxpart3       | r
- idxpart3_a_idx | i
-(7 rows)
-
-drop table idxpart, idxpart1, idxpart2, idxpart3;
-select relname, relkind from pg_class where relname like 'idxpart%' order by relname;
- relname | relkind 
----------+---------
-(0 rows)
-
-create table idxpart (a int, b int, c int) partition by range(a);
-create index on idxpart(c);
-create table idxpart1 partition of idxpart for values from (0) to (250);
-create table idxpart2 partition of idxpart for values from (250) to (500);
-alter table idxpart detach partition idxpart2;
-\d idxpart2
-              Table "public.idxpart2"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           |          | 
- b      | integer |           |          | 
- c      | integer |           |          | 
-Indexes:
-    "idxpart2_c_idx" btree (c)
-
-alter table idxpart2 drop column c;
-\d idxpart2
-              Table "public.idxpart2"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           |          | 
- b      | integer |           |          | 
-
-drop table idxpart, idxpart2;
--- Verify that expression indexes inherit correctly
-create table idxpart (a int, b int) partition by range (a);
-create table idxpart1 (like idxpart);
-create index on idxpart1 ((a + b));
-create index on idxpart ((a + b));
-create table idxpart2 (like idxpart);
-alter table idxpart attach partition idxpart1 for values from (0000) to (1000);
-alter table idxpart attach partition idxpart2 for values from (1000) to (2000);
-create table idxpart3 partition of idxpart for values from (2000) to (3000);
-select relname as child, inhparent::regclass as parent, pg_get_indexdef as childdef
-  from pg_class join pg_inherits on inhrelid = oid,
-  lateral pg_get_indexdef(pg_class.oid)
-  where relkind in ('i', 'I') and relname like 'idxpart%' order by relname;
-       child       |      parent      |                                 childdef                                  
--------------------+------------------+---------------------------------------------------------------------------
- idxpart1_expr_idx | idxpart_expr_idx | CREATE INDEX idxpart1_expr_idx ON public.idxpart1 USING btree (((a + b)))
- idxpart2_expr_idx | idxpart_expr_idx | CREATE INDEX idxpart2_expr_idx ON public.idxpart2 USING btree (((a + b)))
- idxpart3_expr_idx | idxpart_expr_idx | CREATE INDEX idxpart3_expr_idx ON public.idxpart3 USING btree (((a + b)))
-(3 rows)
-
-drop table idxpart;
--- Verify behavior for collation (mis)matches
-create table idxpart (a text) partition by range (a);
-create table idxpart1 (like idxpart);
-create table idxpart2 (like idxpart);
-create index on idxpart2 (a collate "POSIX");
-create index on idxpart2 (a);
-create index on idxpart2 (a collate "C");
-alter table idxpart attach partition idxpart1 for values from ('aaa') to ('bbb');
-alter table idxpart attach partition idxpart2 for values from ('bbb') to ('ccc');
-create table idxpart3 partition of idxpart for values from ('ccc') to ('ddd');
-create index on idxpart (a collate "C");
-create table idxpart4 partition of idxpart for values from ('ddd') to ('eee');
-select relname as child, inhparent::regclass as parent, pg_get_indexdef as childdef
-  from pg_class left join pg_inherits on inhrelid = oid,
-  lateral pg_get_indexdef(pg_class.oid)
-  where relkind in ('i', 'I') and relname like 'idxpart%' order by relname;
-      child      |    parent     |                                    childdef                                    
------------------+---------------+--------------------------------------------------------------------------------
- idxpart1_a_idx  | idxpart_a_idx | CREATE INDEX idxpart1_a_idx ON public.idxpart1 USING btree (a COLLATE "C")
- idxpart2_a_idx  |               | CREATE INDEX idxpart2_a_idx ON public.idxpart2 USING btree (a COLLATE "POSIX")
- idxpart2_a_idx1 |               | CREATE INDEX idxpart2_a_idx1 ON public.idxpart2 USING btree (a)
- idxpart2_a_idx2 | idxpart_a_idx | CREATE INDEX idxpart2_a_idx2 ON public.idxpart2 USING btree (a COLLATE "C")
- idxpart3_a_idx  | idxpart_a_idx | CREATE INDEX idxpart3_a_idx ON public.idxpart3 USING btree (a COLLATE "C")
- idxpart4_a_idx  | idxpart_a_idx | CREATE INDEX idxpart4_a_idx ON public.idxpart4 USING btree (a COLLATE "C")
- idxpart_a_idx   |               | CREATE INDEX idxpart_a_idx ON ONLY public.idxpart USING btree (a COLLATE "C")
-(7 rows)
-
-drop table idxpart;
--- Verify behavior for opclass (mis)matches
-create table idxpart (a text) partition by range (a);
-create table idxpart1 (like idxpart);
-create table idxpart2 (like idxpart);
-create index on idxpart2 (a);
-alter table idxpart attach partition idxpart1 for values from ('aaa') to ('bbb');
-alter table idxpart attach partition idxpart2 for values from ('bbb') to ('ccc');
-create table idxpart3 partition of idxpart for values from ('ccc') to ('ddd');
-create index on idxpart (a text_pattern_ops);
-create table idxpart4 partition of idxpart for values from ('ddd') to ('eee');
--- must *not* have attached the index we created on idxpart2
-select relname as child, inhparent::regclass as parent, pg_get_indexdef as childdef
-  from pg_class left join pg_inherits on inhrelid = oid,
-  lateral pg_get_indexdef(pg_class.oid)
-  where relkind in ('i', 'I') and relname like 'idxpart%' order by relname;
-      child      |    parent     |                                      childdef                                      
------------------+---------------+------------------------------------------------------------------------------------
- idxpart1_a_idx  | idxpart_a_idx | CREATE INDEX idxpart1_a_idx ON public.idxpart1 USING btree (a text_pattern_ops)
- idxpart2_a_idx  |               | CREATE INDEX idxpart2_a_idx ON public.idxpart2 USING btree (a)
- idxpart2_a_idx1 | idxpart_a_idx | CREATE INDEX idxpart2_a_idx1 ON public.idxpart2 USING btree (a text_pattern_ops)
- idxpart3_a_idx  | idxpart_a_idx | CREATE INDEX idxpart3_a_idx ON public.idxpart3 USING btree (a text_pattern_ops)
- idxpart4_a_idx  | idxpart_a_idx | CREATE INDEX idxpart4_a_idx ON public.idxpart4 USING btree (a text_pattern_ops)
- idxpart_a_idx   |               | CREATE INDEX idxpart_a_idx ON ONLY public.idxpart USING btree (a text_pattern_ops)
-(6 rows)
-
-drop index idxpart_a_idx;
-create index on only idxpart (a text_pattern_ops);
--- must reject
-alter index idxpart_a_idx attach partition idxpart2_a_idx;
-ERROR:  cannot attach index "idxpart2_a_idx" as a partition of index "idxpart_a_idx"
-DETAIL:  The index definitions do not match.
-drop table idxpart;
--- Verify that attaching indexes maps attribute numbers correctly
-create table idxpart (col1 int, a int, col2 int, b int) partition by range (a);
-create table idxpart1 (b int, col1 int, col2 int, col3 int, a int);
-alter table idxpart drop column col1, drop column col2;
-alter table idxpart1 drop column col1, drop column col2, drop column col3;
-alter table idxpart attach partition idxpart1 for values from (0) to (1000);
-create index idxpart_1_idx on only idxpart (b, a);
-create index idxpart1_1_idx on idxpart1 (b, a);
-create index idxpart1_1b_idx on idxpart1 (b);
--- test expressions and partial-index predicate, too
-create index idxpart_2_idx on only idxpart ((b + a)) where a > 1;
-create index idxpart1_2_idx on idxpart1 ((b + a)) where a > 1;
-create index idxpart1_2b_idx on idxpart1 ((a + b)) where a > 1;
-create index idxpart1_2c_idx on idxpart1 ((b + a)) where b > 1;
-alter index idxpart_1_idx attach partition idxpart1_1b_idx;	-- fail
-ERROR:  cannot attach index "idxpart1_1b_idx" as a partition of index "idxpart_1_idx"
-DETAIL:  The index definitions do not match.
-alter index idxpart_1_idx attach partition idxpart1_1_idx;
-alter index idxpart_2_idx attach partition idxpart1_2b_idx;	-- fail
-ERROR:  cannot attach index "idxpart1_2b_idx" as a partition of index "idxpart_2_idx"
-DETAIL:  The index definitions do not match.
-alter index idxpart_2_idx attach partition idxpart1_2c_idx;	-- fail
-ERROR:  cannot attach index "idxpart1_2c_idx" as a partition of index "idxpart_2_idx"
-DETAIL:  The index definitions do not match.
-alter index idxpart_2_idx attach partition idxpart1_2_idx;	-- ok
-select relname as child, inhparent::regclass as parent, pg_get_indexdef as childdef
-  from pg_class left join pg_inherits on inhrelid = oid,
-  lateral pg_get_indexdef(pg_class.oid)
-  where relkind in ('i', 'I') and relname like 'idxpart%' order by relname;
-      child      |    parent     |                                        childdef                                         
------------------+---------------+-----------------------------------------------------------------------------------------
- idxpart1_1_idx  | idxpart_1_idx | CREATE INDEX idxpart1_1_idx ON public.idxpart1 USING btree (b, a)
- idxpart1_1b_idx |               | CREATE INDEX idxpart1_1b_idx ON public.idxpart1 USING btree (b)
- idxpart1_2_idx  | idxpart_2_idx | CREATE INDEX idxpart1_2_idx ON public.idxpart1 USING btree (((b + a))) WHERE (a > 1)
- idxpart1_2b_idx |               | CREATE INDEX idxpart1_2b_idx ON public.idxpart1 USING btree (((a + b))) WHERE (a > 1)
- idxpart1_2c_idx |               | CREATE INDEX idxpart1_2c_idx ON public.idxpart1 USING btree (((b + a))) WHERE (b > 1)
- idxpart_1_idx   |               | CREATE INDEX idxpart_1_idx ON ONLY public.idxpart USING btree (b, a)
- idxpart_2_idx   |               | CREATE INDEX idxpart_2_idx ON ONLY public.idxpart USING btree (((b + a))) WHERE (a > 1)
-(7 rows)
-
-drop table idxpart;
--- Make sure the partition columns are mapped correctly
-create table idxpart (a int, b int, c text) partition by range (a);
-create index idxparti on idxpart (a);
-create index idxparti2 on idxpart (c, b);
-create table idxpart1 (c text, a int, b int);
-alter table idxpart attach partition idxpart1 for values from (0) to (10);
-create table idxpart2 (c text, a int, b int);
-create index on idxpart2 (a);
-create index on idxpart2 (c, b);
-alter table idxpart attach partition idxpart2 for values from (10) to (20);
-select c.relname, pg_get_indexdef(indexrelid)
-  from pg_class c join pg_index i on c.oid = i.indexrelid
-  where indrelid::regclass::text like 'idxpart%'
-  order by indexrelid::regclass::text collate "C";
-     relname      |                           pg_get_indexdef                           
-------------------+---------------------------------------------------------------------
- idxpart1_a_idx   | CREATE INDEX idxpart1_a_idx ON public.idxpart1 USING btree (a)
- idxpart1_c_b_idx | CREATE INDEX idxpart1_c_b_idx ON public.idxpart1 USING btree (c, b)
- idxpart2_a_idx   | CREATE INDEX idxpart2_a_idx ON public.idxpart2 USING btree (a)
- idxpart2_c_b_idx | CREATE INDEX idxpart2_c_b_idx ON public.idxpart2 USING btree (c, b)
- idxparti         | CREATE INDEX idxparti ON ONLY public.idxpart USING btree (a)
- idxparti2        | CREATE INDEX idxparti2 ON ONLY public.idxpart USING btree (c, b)
-(6 rows)
-
-drop table idxpart;
--- Verify that columns are mapped correctly in expression indexes
-create table idxpart (col1 int, col2 int, a int, b int) partition by range (a);
-create table idxpart1 (col2 int, b int, col1 int, a int);
-create table idxpart2 (col1 int, col2 int, b int, a int);
-alter table idxpart drop column col1, drop column col2;
-alter table idxpart1 drop column col1, drop column col2;
-alter table idxpart2 drop column col1, drop column col2;
-create index on idxpart2 (abs(b));
-alter table idxpart attach partition idxpart2 for values from (0) to (1);
-create index on idxpart (abs(b));
-create index on idxpart ((b + 1));
-alter table idxpart attach partition idxpart1 for values from (1) to (2);
-select c.relname, pg_get_indexdef(indexrelid)
-  from pg_class c join pg_index i on c.oid = i.indexrelid
-  where indrelid::regclass::text like 'idxpart%'
-  order by indexrelid::regclass::text collate "C";
-      relname      |                               pg_get_indexdef                                
--------------------+------------------------------------------------------------------------------
- idxpart1_abs_idx  | CREATE INDEX idxpart1_abs_idx ON public.idxpart1 USING btree (abs(b))
- idxpart1_expr_idx | CREATE INDEX idxpart1_expr_idx ON public.idxpart1 USING btree (((b + 1)))
- idxpart2_abs_idx  | CREATE INDEX idxpart2_abs_idx ON public.idxpart2 USING btree (abs(b))
- idxpart2_expr_idx | CREATE INDEX idxpart2_expr_idx ON public.idxpart2 USING btree (((b + 1)))
- idxpart_abs_idx   | CREATE INDEX idxpart_abs_idx ON ONLY public.idxpart USING btree (abs(b))
- idxpart_expr_idx  | CREATE INDEX idxpart_expr_idx ON ONLY public.idxpart USING btree (((b + 1)))
-(6 rows)
-
-drop table idxpart;
--- Verify that columns are mapped correctly for WHERE in a partial index
-create table idxpart (col1 int, a int, col3 int, b int) partition by range (a);
-alter table idxpart drop column col1, drop column col3;
-create table idxpart1 (col1 int, col2 int, col3 int, col4 int, b int, a int);
-alter table idxpart1 drop column col1, drop column col2, drop column col3, drop column col4;
-alter table idxpart attach partition idxpart1 for values from (0) to (1000);
-create table idxpart2 (col1 int, col2 int, b int, a int);
-create index on idxpart2 (a) where b > 1000;
-alter table idxpart2 drop column col1, drop column col2;
-alter table idxpart attach partition idxpart2 for values from (1000) to (2000);
-create index on idxpart (a) where b > 1000;
-select c.relname, pg_get_indexdef(indexrelid)
-  from pg_class c join pg_index i on c.oid = i.indexrelid
-  where indrelid::regclass::text like 'idxpart%'
-  order by indexrelid::regclass::text collate "C";
-    relname     |                                  pg_get_indexdef                                   
-----------------+------------------------------------------------------------------------------------
- idxpart1_a_idx | CREATE INDEX idxpart1_a_idx ON public.idxpart1 USING btree (a) WHERE (b > 1000)
- idxpart2_a_idx | CREATE INDEX idxpart2_a_idx ON public.idxpart2 USING btree (a) WHERE (b > 1000)
- idxpart_a_idx  | CREATE INDEX idxpart_a_idx ON ONLY public.idxpart USING btree (a) WHERE (b > 1000)
-(3 rows)
-
-drop table idxpart;
--- Column number mapping: dropped columns in the partition
-create table idxpart1 (drop_1 int, drop_2 int, col_keep int, drop_3 int);
-alter table idxpart1 drop column drop_1;
-alter table idxpart1 drop column drop_2;
-alter table idxpart1 drop column drop_3;
-create index on idxpart1 (col_keep);
-create table idxpart (col_keep int) partition by range (col_keep);
-create index on idxpart (col_keep);
-alter table idxpart attach partition idxpart1 for values from (0) to (1000);
-\d idxpart
-         Partitioned table "public.idxpart"
-  Column  |  Type   | Collation | Nullable | Default 
-----------+---------+-----------+----------+---------
- col_keep | integer |           |          | 
-Partition key: RANGE (col_keep)
-Indexes:
-    "idxpart_col_keep_idx" btree (col_keep)
-Number of partitions: 1 (Use \d+ to list them.)
-
-\d idxpart1
-               Table "public.idxpart1"
-  Column  |  Type   | Collation | Nullable | Default 
-----------+---------+-----------+----------+---------
- col_keep | integer |           |          | 
-Partition of: idxpart FOR VALUES FROM (0) TO (1000)
-Indexes:
-    "idxpart1_col_keep_idx" btree (col_keep)
-
-select attrelid::regclass, attname, attnum from pg_attribute
-  where attrelid::regclass::text like 'idxpart%' and attnum > 0
-  order by attrelid::regclass, attnum;
-       attrelid        |           attname            | attnum 
------------------------+------------------------------+--------
- idxpart1              | ........pg.dropped.1........ |      1
- idxpart1              | ........pg.dropped.2........ |      2
- idxpart1              | col_keep                     |      3
- idxpart1              | ........pg.dropped.4........ |      4
- idxpart1_col_keep_idx | col_keep                     |      1
- idxpart               | col_keep                     |      1
- idxpart_col_keep_idx  | col_keep                     |      1
-(7 rows)
-
-drop table idxpart;
--- Column number mapping: dropped columns in the parent table
-create table idxpart(drop_1 int, drop_2 int, col_keep int, drop_3 int) partition by range (col_keep);
-alter table idxpart drop column drop_1;
-alter table idxpart drop column drop_2;
-alter table idxpart drop column drop_3;
-create table idxpart1 (col_keep int);
-create index on idxpart1 (col_keep);
-create index on idxpart (col_keep);
-alter table idxpart attach partition idxpart1 for values from (0) to (1000);
-\d idxpart
-         Partitioned table "public.idxpart"
-  Column  |  Type   | Collation | Nullable | Default 
-----------+---------+-----------+----------+---------
- col_keep | integer |           |          | 
-Partition key: RANGE (col_keep)
-Indexes:
-    "idxpart_col_keep_idx" btree (col_keep)
-Number of partitions: 1 (Use \d+ to list them.)
-
-\d idxpart1
-               Table "public.idxpart1"
-  Column  |  Type   | Collation | Nullable | Default 
-----------+---------+-----------+----------+---------
- col_keep | integer |           |          | 
-Partition of: idxpart FOR VALUES FROM (0) TO (1000)
-Indexes:
-    "idxpart1_col_keep_idx" btree (col_keep)
-
-select attrelid::regclass, attname, attnum from pg_attribute
-  where attrelid::regclass::text like 'idxpart%' and attnum > 0
-  order by attrelid::regclass, attnum;
-       attrelid        |           attname            | attnum 
------------------------+------------------------------+--------
- idxpart               | ........pg.dropped.1........ |      1
- idxpart               | ........pg.dropped.2........ |      2
- idxpart               | col_keep                     |      3
- idxpart               | ........pg.dropped.4........ |      4
- idxpart1              | col_keep                     |      1
- idxpart1_col_keep_idx | col_keep                     |      1
- idxpart_col_keep_idx  | col_keep                     |      1
-(7 rows)
-
-drop table idxpart;
---
--- Constraint-related indexes
---
--- Verify that it works to add primary key / unique to partitioned tables
-create table idxpart (a int primary key, b int) partition by range (a);
-\d idxpart
-        Partitioned table "public.idxpart"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           | not null | 
- b      | integer |           |          | 
-Partition key: RANGE (a)
-Indexes:
-    "idxpart_pkey" PRIMARY KEY, btree (a)
-Number of partitions: 0
-
--- multiple primary key on child should fail
-create table failpart partition of idxpart (b primary key) for values from (0) to (100);
-ERROR:  multiple primary keys for table "failpart" are not allowed
-drop table idxpart;
--- primary key on child is okay if there's no PK in the parent, though
-create table idxpart (a int) partition by range (a);
-create table idxpart1pk partition of idxpart (a primary key) for values from (0) to (100);
-\d idxpart1pk
-             Table "public.idxpart1pk"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           | not null | 
-Partition of: idxpart FOR VALUES FROM (0) TO (100)
-Indexes:
-    "idxpart1pk_pkey" PRIMARY KEY, btree (a)
-
-drop table idxpart;
--- Failing to use the full partition key is not allowed
-create table idxpart (a int unique, b int) partition by range (a, b);
-ERROR:  unique constraint on partitioned table must include all partitioning columns
-DETAIL:  UNIQUE constraint on table "idxpart" lacks column "b" which is part of the partition key.
-create table idxpart (a int, b int unique) partition by range (a, b);
-ERROR:  unique constraint on partitioned table must include all partitioning columns
-DETAIL:  UNIQUE constraint on table "idxpart" lacks column "a" which is part of the partition key.
-create table idxpart (a int primary key, b int) partition by range (b, a);
-ERROR:  unique constraint on partitioned table must include all partitioning columns
-DETAIL:  PRIMARY KEY constraint on table "idxpart" lacks column "b" which is part of the partition key.
-create table idxpart (a int, b int primary key) partition by range (b, a);
-ERROR:  unique constraint on partitioned table must include all partitioning columns
-DETAIL:  PRIMARY KEY constraint on table "idxpart" lacks column "a" which is part of the partition key.
--- OK if you use them in some other order
-create table idxpart (a int, b int, c text, primary key  (a, b, c)) partition by range (b, c, a);
-drop table idxpart;
--- OK to add an exclusion constraint if partitioning by its equal column
-create table idxpart (a int4range, exclude USING GIST (a with = )) partition by range (a);
-drop table idxpart;
--- OK more than one equal column
-create table idxpart (a int4range, b int4range, exclude USING GIST (a with =, b with =)) partition by range (a, b);
-drop table idxpart;
--- OK with more than one equal column: constraint is a proper superset of partition key
-create table idxpart (a int4range, b int4range, exclude USING GIST (a with =, b with =)) partition by range (a);
-drop table idxpart;
--- Not OK more than one equal column: partition keys are a proper superset of constraint
-create table idxpart (a int4range, b int4range, exclude USING GIST (a with = )) partition by range (a, b);
-ERROR:  unique constraint on partitioned table must include all partitioning columns
-DETAIL:  EXCLUDE constraint on table "idxpart" lacks column "b" which is part of the partition key.
--- Not OK with just -|-
-create table idxpart (a int4range, exclude USING GIST (a with -|- )) partition by range (a);
-ERROR:  cannot match partition key to index on column "a" using non-equal operator "-|-"
--- OK with equals and &&, and equals is the partition key
-create table idxpart (a int4range, b int4range, exclude USING GIST (a with =, b with &&)) partition by range (a);
-drop table idxpart;
--- Not OK with equals and &&, and equals is not the partition key
-create table idxpart (a int4range, b int4range, c int4range, exclude USING GIST (b with =, c with &&)) partition by range (a);
-ERROR:  unique constraint on partitioned table must include all partitioning columns
-DETAIL:  EXCLUDE constraint on table "idxpart" lacks column "a" which is part of the partition key.
--- OK more than one equal column and a && column
-create table idxpart (a int4range, b int4range, c int4range, exclude USING GIST (a with =, b with =, c with &&)) partition by range (a, b);
-drop table idxpart;
--- no expressions in partition key for PK/UNIQUE
-create table idxpart (a int primary key, b int) partition by range ((b + a));
-ERROR:  unsupported PRIMARY KEY constraint with partition key definition
-DETAIL:  PRIMARY KEY constraints cannot be used when partition keys include expressions.
-create table idxpart (a int unique, b int) partition by range ((b + a));
-ERROR:  unsupported UNIQUE constraint with partition key definition
-DETAIL:  UNIQUE constraints cannot be used when partition keys include expressions.
--- use ALTER TABLE to add a primary key
-create table idxpart (a int, b int, c text) partition by range (a, b);
-alter table idxpart add primary key (a);	-- not an incomplete one though
-ERROR:  unique constraint on partitioned table must include all partitioning columns
-DETAIL:  PRIMARY KEY constraint on table "idxpart" lacks column "b" which is part of the partition key.
-alter table idxpart add primary key (a, b);	-- this works
-\d idxpart
-        Partitioned table "public.idxpart"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           | not null | 
- b      | integer |           | not null | 
- c      | text    |           |          | 
-Partition key: RANGE (a, b)
-Indexes:
-    "idxpart_pkey" PRIMARY KEY, btree (a, b)
-Number of partitions: 0
-
-create table idxpart1 partition of idxpart for values from (0, 0) to (1000, 1000);
-\d idxpart1
-              Table "public.idxpart1"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           | not null | 
- b      | integer |           | not null | 
- c      | text    |           |          | 
-Partition of: idxpart FOR VALUES FROM (0, 0) TO (1000, 1000)
-Indexes:
-    "idxpart1_pkey" PRIMARY KEY, btree (a, b)
-
-drop table idxpart;
--- use ALTER TABLE to add a unique constraint
-create table idxpart (a int, b int) partition by range (a, b);
-alter table idxpart add unique (a);			-- not an incomplete one though
-ERROR:  unique constraint on partitioned table must include all partitioning columns
-DETAIL:  UNIQUE constraint on table "idxpart" lacks column "b" which is part of the partition key.
-alter table idxpart add unique (b, a);		-- this works
-\d idxpart
-        Partitioned table "public.idxpart"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           |          | 
- b      | integer |           |          | 
-Partition key: RANGE (a, b)
-Indexes:
-    "idxpart_b_a_key" UNIQUE CONSTRAINT, btree (b, a)
-Number of partitions: 0
-
-drop table idxpart;
--- Exclusion constraints can be added if partitioning by their equal column
-create table idxpart (a int4range, b int4range) partition by range (a);
-alter table idxpart add exclude USING GIST (a with =);
-drop table idxpart;
--- OK more than one equal column
-create table idxpart (a int4range, b int4range) partition by range (a, b);
-alter table idxpart add exclude USING GIST (a with =, b with =);
-drop table idxpart;
--- OK with more than one equal column: constraint is a proper superset of partition key
-create table idxpart (a int4range, b int4range) partition by range (a);
-alter table idxpart add exclude USING GIST (a with =, b with =);
-drop table idxpart;
--- Not OK more than one equal column: partition keys are a proper superset of constraint
-create table idxpart (a int4range, b int4range) partition by range (a, b);
-alter table idxpart add exclude USING GIST (a with =);
-ERROR:  unique constraint on partitioned table must include all partitioning columns
-DETAIL:  EXCLUDE constraint on table "idxpart" lacks column "b" which is part of the partition key.
-drop table idxpart;
--- Not OK with just -|-
-create table idxpart (a int4range, b int4range) partition by range (a, b);
-alter table idxpart add exclude USING GIST (a with -|-);
-ERROR:  cannot match partition key to index on column "a" using non-equal operator "-|-"
-drop table idxpart;
--- OK with equals and &&, and equals is the partition key
-create table idxpart (a int4range, b int4range) partition by range (a);
-alter table idxpart add exclude USING GIST (a with =, b with &&);
-drop table idxpart;
--- Not OK with equals and &&, and equals is not the partition key
-create table idxpart (a int4range, b int4range, c int4range) partition by range (a);
-alter table idxpart add exclude USING GIST (b with =, c with &&);
-ERROR:  unique constraint on partitioned table must include all partitioning columns
-DETAIL:  EXCLUDE constraint on table "idxpart" lacks column "a" which is part of the partition key.
-drop table idxpart;
--- OK more than one equal column and a && column
-create table idxpart (a int4range, b int4range, c int4range) partition by range (a, b);
-alter table idxpart add exclude USING GIST (a with =, b with =, c with &&);
-drop table idxpart;
--- When (sub)partitions are created, they also contain the constraint
-create table idxpart (a int, b int, primary key (a, b)) partition by range (a, b);
-create table idxpart1 partition of idxpart for values from (1, 1) to (10, 10);
-create table idxpart2 partition of idxpart for values from (10, 10) to (20, 20)
-  partition by range (b);
-create table idxpart21 partition of idxpart2 for values from (10) to (15);
-create table idxpart22 partition of idxpart2 for values from (15) to (20);
-create table idxpart3 (b int not null, a int not null);
-alter table idxpart attach partition idxpart3 for values from (20, 20) to (30, 30);
-select conname, contype, conrelid::regclass, conindid::regclass, conkey
-  from pg_constraint where conrelid::regclass::text like 'idxpart%'
-  order by conrelid::regclass::text, conname;
-    conname     | contype | conrelid  |    conindid    | conkey 
-----------------+---------+-----------+----------------+--------
- idxpart_pkey   | p       | idxpart   | idxpart_pkey   | {1,2}
- idxpart1_pkey  | p       | idxpart1  | idxpart1_pkey  | {1,2}
- idxpart2_pkey  | p       | idxpart2  | idxpart2_pkey  | {1,2}
- idxpart21_pkey | p       | idxpart21 | idxpart21_pkey | {1,2}
- idxpart22_pkey | p       | idxpart22 | idxpart22_pkey | {1,2}
- idxpart3_pkey  | p       | idxpart3  | idxpart3_pkey  | {2,1}
-(6 rows)
-
-drop table idxpart;
--- Verify that multi-layer partitioning honors the requirement that all
--- columns in the partition key must appear in primary/unique key
-create table idxpart (a int, b int, primary key (a)) partition by range (a);
-create table idxpart2 partition of idxpart
-for values from (0) to (1000) partition by range (b); -- fail
-ERROR:  unique constraint on partitioned table must include all partitioning columns
-DETAIL:  PRIMARY KEY constraint on table "idxpart2" lacks column "b" which is part of the partition key.
-drop table idxpart;
--- Ditto for the ATTACH PARTITION case
-create table idxpart (a int unique, b int) partition by range (a);
-create table idxpart1 (a int not null, b int, unique (a, b))
-  partition by range (a, b);
-alter table idxpart attach partition idxpart1 for values from (1) to (1000);
-ERROR:  unique constraint on partitioned table must include all partitioning columns
-DETAIL:  UNIQUE constraint on table "idxpart1" lacks column "b" which is part of the partition key.
-DROP TABLE idxpart, idxpart1;
--- Multi-layer partitioning works correctly in this case:
-create table idxpart (a int, b int, primary key (a, b)) partition by range (a);
-create table idxpart2 partition of idxpart for values from (0) to (1000) partition by range (b);
-create table idxpart21 partition of idxpart2 for values from (0) to (1000);
-select conname, contype, conrelid::regclass, conindid::regclass, conkey
-  from pg_constraint where conrelid::regclass::text like 'idxpart%'
-  order by conname;
-    conname     | contype | conrelid  |    conindid    | conkey 
-----------------+---------+-----------+----------------+--------
- idxpart21_pkey | p       | idxpart21 | idxpart21_pkey | {1,2}
- idxpart2_pkey  | p       | idxpart2  | idxpart2_pkey  | {1,2}
- idxpart_pkey   | p       | idxpart   | idxpart_pkey   | {1,2}
-(3 rows)
-
-drop table idxpart;
--- If a partitioned table has a unique/PK constraint, then it's not possible
--- to drop the corresponding constraint in the children; nor it's possible
--- to drop the indexes individually.  Dropping the constraint in the parent
--- gets rid of the lot.
-create table idxpart (i int) partition by hash (i);
-create table idxpart0 partition of idxpart (i) for values with (modulus 2, remainder 0);
-create table idxpart1 partition of idxpart (i) for values with (modulus 2, remainder 1);
-alter table idxpart0 add primary key(i);
-alter table idxpart add primary key(i);
-select indrelid::regclass, indexrelid::regclass, inhparent::regclass, indisvalid,
-  conname, conislocal, coninhcount, connoinherit, convalidated
-  from pg_index idx left join pg_inherits inh on (idx.indexrelid = inh.inhrelid)
-  left join pg_constraint con on (idx.indexrelid = con.conindid)
-  where indrelid::regclass::text like 'idxpart%'
-  order by indexrelid::regclass::text collate "C";
- indrelid |  indexrelid   |  inhparent   | indisvalid |    conname    | conislocal | coninhcount | connoinherit | convalidated 
-----------+---------------+--------------+------------+---------------+------------+-------------+--------------+--------------
- idxpart0 | idxpart0_pkey | idxpart_pkey | t          | idxpart0_pkey | f          |           1 | t            | t
- idxpart1 | idxpart1_pkey | idxpart_pkey | t          | idxpart1_pkey | f          |           1 | f            | t
- idxpart  | idxpart_pkey  |              | t          | idxpart_pkey  | t          |           0 | t            | t
-(3 rows)
-
-drop index idxpart0_pkey;								-- fail
-ERROR:  cannot drop index idxpart0_pkey because index idxpart_pkey requires it
-HINT:  You can drop index idxpart_pkey instead.
-drop index idxpart1_pkey;								-- fail
-ERROR:  cannot drop index idxpart1_pkey because index idxpart_pkey requires it
-HINT:  You can drop index idxpart_pkey instead.
-alter table idxpart0 drop constraint idxpart0_pkey;		-- fail
-ERROR:  cannot drop inherited constraint "idxpart0_pkey" of relation "idxpart0"
-alter table idxpart1 drop constraint idxpart1_pkey;		-- fail
-ERROR:  cannot drop inherited constraint "idxpart1_pkey" of relation "idxpart1"
-alter table idxpart drop constraint idxpart_pkey;		-- ok
-select indrelid::regclass, indexrelid::regclass, inhparent::regclass, indisvalid,
-  conname, conislocal, coninhcount, connoinherit, convalidated
-  from pg_index idx left join pg_inherits inh on (idx.indexrelid = inh.inhrelid)
-  left join pg_constraint con on (idx.indexrelid = con.conindid)
-  where indrelid::regclass::text like 'idxpart%'
-  order by indexrelid::regclass::text collate "C";
- indrelid | indexrelid | inhparent | indisvalid | conname | conislocal | coninhcount | connoinherit | convalidated 
-----------+------------+-----------+------------+---------+------------+-------------+--------------+--------------
-(0 rows)
-
-drop table idxpart;
--- If the partition to be attached already has a primary key, fail if
--- it doesn't match the parent's PK.
-CREATE TABLE idxpart (c1 INT PRIMARY KEY, c2 INT, c3 VARCHAR(10)) PARTITION BY RANGE(c1);
-CREATE TABLE idxpart1 (LIKE idxpart);
-ALTER TABLE idxpart1 ADD PRIMARY KEY (c1, c2);
-ALTER TABLE idxpart ATTACH PARTITION idxpart1 FOR VALUES FROM (100) TO (200);
-ERROR:  multiple primary keys for table "idxpart1" are not allowed
-DROP TABLE idxpart, idxpart1;
--- Ditto if there is some distance between the PKs (subpartitioning)
-create table idxpart (a int, b int, primary key (a)) partition by range (a);
-create table idxpart1 (a int not null, b int) partition by range (a);
-create table idxpart11 (a int not null, b int primary key);
-alter table idxpart1 attach partition idxpart11 for values from (0) to (1000);
-alter table idxpart attach partition idxpart1 for values from (0) to (10000);
-ERROR:  multiple primary keys for table "idxpart11" are not allowed
-drop table idxpart, idxpart1, idxpart11;
--- If a partitioned table has a constraint whose index is not valid,
--- attaching a missing partition makes it valid.
-create table idxpart (a int) partition by range (a);
-create table idxpart0 (like idxpart);
-alter table idxpart0 add primary key (a);
-alter table idxpart attach partition idxpart0 for values from (0) to (1000);
-alter table only idxpart add primary key (a);
-select indrelid::regclass, indexrelid::regclass, inhparent::regclass, indisvalid,
-  conname, conislocal, coninhcount, connoinherit, convalidated
-  from pg_index idx left join pg_inherits inh on (idx.indexrelid = inh.inhrelid)
-  left join pg_constraint con on (idx.indexrelid = con.conindid)
-  where indrelid::regclass::text like 'idxpart%'
-  order by indexrelid::regclass::text collate "C";
- indrelid |  indexrelid   | inhparent | indisvalid |    conname    | conislocal | coninhcount | connoinherit | convalidated 
-----------+---------------+-----------+------------+---------------+------------+-------------+--------------+--------------
- idxpart0 | idxpart0_pkey |           | t          | idxpart0_pkey | t          |           0 | t            | t
- idxpart  | idxpart_pkey  |           | f          | idxpart_pkey  | t          |           0 | t            | t
-(2 rows)
-
-alter index idxpart_pkey attach partition idxpart0_pkey;
-select indrelid::regclass, indexrelid::regclass, inhparent::regclass, indisvalid,
-  conname, conislocal, coninhcount, connoinherit, convalidated
-  from pg_index idx left join pg_inherits inh on (idx.indexrelid = inh.inhrelid)
-  left join pg_constraint con on (idx.indexrelid = con.conindid)
-  where indrelid::regclass::text like 'idxpart%'
-  order by indexrelid::regclass::text collate "C";
- indrelid |  indexrelid   |  inhparent   | indisvalid |    conname    | conislocal | coninhcount | connoinherit | convalidated 
-----------+---------------+--------------+------------+---------------+------------+-------------+--------------+--------------
- idxpart0 | idxpart0_pkey | idxpart_pkey | t          | idxpart0_pkey | f          |           1 | t            | t
- idxpart  | idxpart_pkey  |              | t          | idxpart_pkey  | t          |           0 | t            | t
-(2 rows)
-
-drop table idxpart;
--- Related to the above scenario: ADD PRIMARY KEY on the parent mustn't
--- automatically propagate NOT NULL to child columns.
-create table idxpart (a int) partition by range (a);
-create table idxpart0 (like idxpart);
-alter table idxpart0 add unique (a);
-alter table idxpart attach partition idxpart0 default;
-alter table only idxpart add primary key (a);  -- fail, no not-null constraint
-ERROR:  constraint must be added to child tables too
-DETAIL:  Column "a" of relation "idxpart0" is not already NOT NULL.
-HINT:  Do not specify the ONLY keyword.
-alter table idxpart0 alter column a set not null;
-alter table only idxpart add primary key (a);  -- now it works
-alter index idxpart_pkey attach partition idxpart0_a_key;
-alter table idxpart0 alter column a drop not null;  -- fail, pkey needs it
-ERROR:  column "a" is marked NOT NULL in parent table
-drop table idxpart;
--- if a partition has a unique index without a constraint, does not attach
--- automatically; creates a new index instead.
-create table idxpart (a int, b int) partition by range (a);
-create table idxpart1 (a int not null, b int);
-create unique index on idxpart1 (a);
-alter table idxpart add primary key (a);
-alter table idxpart attach partition idxpart1 for values from (1) to (1000);
-select indrelid::regclass, indexrelid::regclass, inhparent::regclass, indisvalid,
-  conname, conislocal, coninhcount, connoinherit, convalidated
-  from pg_index idx left join pg_inherits inh on (idx.indexrelid = inh.inhrelid)
-  left join pg_constraint con on (idx.indexrelid = con.conindid)
-  where indrelid::regclass::text like 'idxpart%'
-  order by indexrelid::regclass::text collate "C";
- indrelid |   indexrelid   |  inhparent   | indisvalid |    conname    | conislocal | coninhcount | connoinherit | convalidated 
-----------+----------------+--------------+------------+---------------+------------+-------------+--------------+--------------
- idxpart1 | idxpart1_a_idx |              | t          |               |            |             |              | 
- idxpart1 | idxpart1_pkey  | idxpart_pkey | t          | idxpart1_pkey | f          |           1 | f            | t
- idxpart  | idxpart_pkey   |              | t          | idxpart_pkey  | t          |           0 | t            | t
-(3 rows)
-
-drop table idxpart;
--- Can't attach an index without a corresponding constraint
-create table idxpart (a int, b int) partition by range (a);
-create table idxpart1 (a int not null, b int);
-create unique index on idxpart1 (a);
-alter table idxpart attach partition idxpart1 for values from (1) to (1000);
-alter table only idxpart add primary key (a);
-alter index idxpart_pkey attach partition idxpart1_a_idx;	-- fail
-ERROR:  cannot attach index "idxpart1_a_idx" as a partition of index "idxpart_pkey"
-DETAIL:  The index "idxpart_pkey" belongs to a constraint in table "idxpart" but no constraint exists for index "idxpart1_a_idx".
-drop table idxpart;
--- Test that unique constraints are working
-create table idxpart (a int, b text, primary key (a, b)) partition by range (a);
-create table idxpart1 partition of idxpart for values from (0) to (100000);
-create table idxpart2 (c int, like idxpart);
-insert into idxpart2 (c, a, b) values (42, 572814, 'inserted first');
-alter table idxpart2 drop column c;
-create unique index on idxpart (a);
-alter table idxpart attach partition idxpart2 for values from (100000) to (1000000);
-insert into idxpart values (0, 'zero'), (42, 'life'), (2^16, 'sixteen');
-insert into idxpart select 2^g, format('two to power of %s', g) from generate_series(15, 17) g;
-ERROR:  duplicate key value violates unique constraint "idxpart1_a_idx"
-DETAIL:  Key (a)=(65536) already exists.
-insert into idxpart values (16, 'sixteen');
-insert into idxpart (b, a) values ('one', 142857), ('two', 285714);
-insert into idxpart select a * 2, b || b from idxpart where a between 2^16 and 2^19;
-ERROR:  duplicate key value violates unique constraint "idxpart2_a_idx"
-DETAIL:  Key (a)=(285714) already exists.
-insert into idxpart values (572814, 'five');
-ERROR:  duplicate key value violates unique constraint "idxpart2_a_idx"
-DETAIL:  Key (a)=(572814) already exists.
-insert into idxpart values (857142, 'six');
-select tableoid::regclass, * from idxpart order by a;
- tableoid |   a    |       b        
-----------+--------+----------------
- idxpart1 |      0 | zero
- idxpart1 |     16 | sixteen
- idxpart1 |     42 | life
- idxpart1 |  65536 | sixteen
- idxpart2 | 142857 | one
- idxpart2 | 285714 | two
- idxpart2 | 572814 | inserted first
- idxpart2 | 857142 | six
-(8 rows)
-
-drop table idxpart;
--- Test some other non-btree index types
-create table idxpart (a int, b text, c int[]) partition by range (a);
-create table idxpart1 partition of idxpart for values from (0) to (100000);
-set enable_seqscan to off;
-create index idxpart_brin on idxpart using brin(b);
-explain (costs off) select * from idxpart where b = 'abcd';
-                QUERY PLAN                 
--------------------------------------------
- Bitmap Heap Scan on idxpart1 idxpart
-   Recheck Cond: (b = 'abcd'::text)
-   ->  Bitmap Index Scan on idxpart1_b_idx
-         Index Cond: (b = 'abcd'::text)
-(4 rows)
-
-drop index idxpart_brin;
-create index idxpart_spgist on idxpart using spgist(b);
-explain (costs off) select * from idxpart where b = 'abcd';
-                QUERY PLAN                 
--------------------------------------------
- Bitmap Heap Scan on idxpart1 idxpart
-   Recheck Cond: (b = 'abcd'::text)
-   ->  Bitmap Index Scan on idxpart1_b_idx
-         Index Cond: (b = 'abcd'::text)
-(4 rows)
-
-drop index idxpart_spgist;
-create index idxpart_gin on idxpart using gin(c);
-explain (costs off) select * from idxpart where c @> array[42];
-                  QUERY PLAN                  
-----------------------------------------------
- Bitmap Heap Scan on idxpart1 idxpart
-   Recheck Cond: (c @> '{42}'::integer[])
-   ->  Bitmap Index Scan on idxpart1_c_idx
-         Index Cond: (c @> '{42}'::integer[])
-(4 rows)
-
-drop index idxpart_gin;
-reset enable_seqscan;
-drop table idxpart;
--- intentionally leave some objects around
-create table idxpart (a int) partition by range (a);
-create table idxpart1 partition of idxpart for values from (0) to (100);
-create table idxpart2 partition of idxpart for values from (100) to (1000)
-  partition by range (a);
-create table idxpart21 partition of idxpart2 for values from (100) to (200);
-create table idxpart22 partition of idxpart2 for values from (200) to (300);
-create index on idxpart22 (a);
-create index on only idxpart2 (a);
-alter index idxpart2_a_idx attach partition idxpart22_a_idx;
-create index on idxpart (a);
-create table idxpart_another (a int, b int, primary key (a, b)) partition by range (a);
-create table idxpart_another_1 partition of idxpart_another for values from (0) to (100);
-create table idxpart3 (c int, b int, a int) partition by range (a);
-alter table idxpart3 drop column b, drop column c;
-create table idxpart31 partition of idxpart3 for values from (1000) to (1200);
-create table idxpart32 partition of idxpart3 for values from (1200) to (1400);
-alter table idxpart attach partition idxpart3 for values from (1000) to (2000);
--- More objects intentionally left behind, to verify some pg_dump/pg_upgrade
--- behavior; see https://postgr.es/m/20190321204928.GA17535@alvherre.pgsql
-create schema regress_indexing;
-set search_path to regress_indexing;
-create table pk (a int primary key) partition by range (a);
-create table pk1 partition of pk for values from (0) to (1000);
-create table pk2 (b int, a int);
-alter table pk2 drop column b;
-alter table pk2 alter a set not null;
-alter table pk attach partition pk2 for values from (1000) to (2000);
-create table pk3 partition of pk for values from (2000) to (3000);
-create table pk4 (like pk);
-alter table pk attach partition pk4 for values from (3000) to (4000);
-create table pk5 (like pk) partition by range (a);
-create table pk51 partition of pk5 for values from (4000) to (4500);
-create table pk52 partition of pk5 for values from (4500) to (5000);
-alter table pk attach partition pk5 for values from (4000) to (5000);
-reset search_path;
--- Test that covering partitioned indexes work in various cases
-create table covidxpart (a int, b int) partition by list (a);
-create unique index on covidxpart (a) include (b);
-create table covidxpart1 partition of covidxpart for values in (1);
-create table covidxpart2 partition of covidxpart for values in (2);
-insert into covidxpart values (1, 1);
-insert into covidxpart values (1, 1);
-ERROR:  duplicate key value violates unique constraint "covidxpart1_a_b_idx"
-DETAIL:  Key (a)=(1) already exists.
-create table covidxpart3 (b int, c int, a int);
-alter table covidxpart3 drop c;
-alter table covidxpart attach partition covidxpart3 for values in (3);
-insert into covidxpart values (3, 1);
-insert into covidxpart values (3, 1);
-ERROR:  duplicate key value violates unique constraint "covidxpart3_a_b_idx"
-DETAIL:  Key (a)=(3) already exists.
-create table covidxpart4 (b int, a int);
-create unique index on covidxpart4 (a) include (b);
-create unique index on covidxpart4 (a);
-alter table covidxpart attach partition covidxpart4 for values in (4);
-insert into covidxpart values (4, 1);
-insert into covidxpart values (4, 1);
-ERROR:  duplicate key value violates unique constraint "covidxpart4_a_b_idx"
-DETAIL:  Key (a)=(4) already exists.
-create unique index on covidxpart (b) include (a); -- should fail
-ERROR:  unique constraint on partitioned table must include all partitioning columns
-DETAIL:  UNIQUE constraint on table "covidxpart" lacks column "a" which is part of the partition key.
--- check that detaching a partition also detaches the primary key constraint
-create table parted_pk_detach_test (a int primary key) partition by list (a);
-create table parted_pk_detach_test1 partition of parted_pk_detach_test for values in (1);
-alter table parted_pk_detach_test1 drop constraint parted_pk_detach_test1_pkey;	-- should fail
-ERROR:  cannot drop inherited constraint "parted_pk_detach_test1_pkey" of relation "parted_pk_detach_test1"
-alter table parted_pk_detach_test detach partition parted_pk_detach_test1;
-alter table parted_pk_detach_test1 drop constraint parted_pk_detach_test1_pkey;
-drop table parted_pk_detach_test, parted_pk_detach_test1;
-create table parted_uniq_detach_test (a int unique) partition by list (a);
-create table parted_uniq_detach_test1 partition of parted_uniq_detach_test for values in (1);
-alter table parted_uniq_detach_test1 drop constraint parted_uniq_detach_test1_a_key;	-- should fail
-ERROR:  cannot drop inherited constraint "parted_uniq_detach_test1_a_key" of relation "parted_uniq_detach_test1"
-alter table parted_uniq_detach_test detach partition parted_uniq_detach_test1;
-alter table parted_uniq_detach_test1 drop constraint parted_uniq_detach_test1_a_key;
-drop table parted_uniq_detach_test, parted_uniq_detach_test1;
--- check that dropping a column takes with it any partitioned indexes
--- depending on it.
-create table parted_index_col_drop(a int, b int, c int)
-  partition by list (a);
-create table parted_index_col_drop1 partition of parted_index_col_drop
-  for values in (1) partition by list (a);
--- leave this partition without children.
-create table parted_index_col_drop2 partition of parted_index_col_drop
-  for values in (2) partition by list (a);
-create table parted_index_col_drop11 partition of parted_index_col_drop1
-  for values in (1);
-create index on parted_index_col_drop (b);
-create index on parted_index_col_drop (c);
-create index on parted_index_col_drop (b, c);
-alter table parted_index_col_drop drop column c;
-\d parted_index_col_drop
- Partitioned table "public.parted_index_col_drop"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           |          | 
- b      | integer |           |          | 
-Partition key: LIST (a)
-Indexes:
-    "parted_index_col_drop_b_idx" btree (b)
-Number of partitions: 2 (Use \d+ to list them.)
-
-\d parted_index_col_drop1
- Partitioned table "public.parted_index_col_drop1"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           |          | 
- b      | integer |           |          | 
-Partition of: parted_index_col_drop FOR VALUES IN (1)
-Partition key: LIST (a)
-Indexes:
-    "parted_index_col_drop1_b_idx" btree (b)
-Number of partitions: 1 (Use \d+ to list them.)
-
-\d parted_index_col_drop2
- Partitioned table "public.parted_index_col_drop2"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           |          | 
- b      | integer |           |          | 
-Partition of: parted_index_col_drop FOR VALUES IN (2)
-Partition key: LIST (a)
-Indexes:
-    "parted_index_col_drop2_b_idx" btree (b)
-Number of partitions: 0
-
-\d parted_index_col_drop11
-      Table "public.parted_index_col_drop11"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           |          | 
- b      | integer |           |          | 
-Partition of: parted_index_col_drop1 FOR VALUES IN (1)
-Indexes:
-    "parted_index_col_drop11_b_idx" btree (b)
-
-drop table parted_index_col_drop;
--- Check that invalid indexes are not selected when attaching a partition.
-create table parted_inval_tab (a int) partition by range (a);
-create index parted_inval_idx on parted_inval_tab (a);
-create table parted_inval_tab_1 (a int) partition by range (a);
-create table parted_inval_tab_1_1 partition of parted_inval_tab_1
-  for values from (0) to (10);
-create table parted_inval_tab_1_2 partition of parted_inval_tab_1
-  for values from (10) to (20);
--- this creates an invalid index.
-create index parted_inval_ixd_1 on only parted_inval_tab_1 (a);
--- this creates new indexes for all the partitions of parted_inval_tab_1,
--- discarding the invalid index created previously as what is chosen.
-alter table parted_inval_tab attach partition parted_inval_tab_1
-  for values from (1) to (100);
-select indexrelid::regclass, indisvalid,
-       indrelid::regclass, inhparent::regclass
-  from pg_index idx left join
-       pg_inherits inh on (idx.indexrelid = inh.inhrelid)
-  where indexrelid::regclass::text like 'parted_inval%'
-  order by indexrelid::regclass::text collate "C";
-         indexrelid         | indisvalid |       indrelid       |        inhparent         
-----------------------------+------------+----------------------+--------------------------
- parted_inval_idx           | t          | parted_inval_tab     | 
- parted_inval_ixd_1         | f          | parted_inval_tab_1   | 
- parted_inval_tab_1_1_a_idx | t          | parted_inval_tab_1_1 | parted_inval_tab_1_a_idx
- parted_inval_tab_1_2_a_idx | t          | parted_inval_tab_1_2 | parted_inval_tab_1_a_idx
- parted_inval_tab_1_a_idx   | t          | parted_inval_tab_1   | parted_inval_idx
-(5 rows)
-
-drop table parted_inval_tab;
--- Check setup of indisvalid across a complex partition tree on index
--- creation.  If one index in a partition index is invalid, so should its
--- partitioned index.
-create table parted_isvalid_tab (a int, b int) partition by range (a);
-create table parted_isvalid_tab_1 partition of parted_isvalid_tab
-  for values from (1) to (10) partition by range (a);
-create table parted_isvalid_tab_2 partition of parted_isvalid_tab
-  for values from (10) to (20) partition by range (a);
-create table parted_isvalid_tab_11 partition of parted_isvalid_tab_1
-  for values from (1) to (5);
-create table parted_isvalid_tab_12 partition of parted_isvalid_tab_1
-  for values from (5) to (10);
--- create an invalid index on one of the partitions.
-insert into parted_isvalid_tab_11 values (1, 0);
-create index concurrently parted_isvalid_idx_11 on parted_isvalid_tab_11 ((a/b));
-ERROR:  division by zero
--- The previous invalid index is selected, invalidating all the indexes up to
--- the top-most parent.
-create index parted_isvalid_idx on parted_isvalid_tab ((a/b));
-select indexrelid::regclass, indisvalid,
-       indrelid::regclass, inhparent::regclass
-  from pg_index idx left join
-       pg_inherits inh on (idx.indexrelid = inh.inhrelid)
-  where indexrelid::regclass::text like 'parted_isvalid%'
-  order by indexrelid::regclass::text collate "C";
-           indexrelid           | indisvalid |       indrelid        |           inhparent           
---------------------------------+------------+-----------------------+-------------------------------
- parted_isvalid_idx             | f          | parted_isvalid_tab    | 
- parted_isvalid_idx_11          | f          | parted_isvalid_tab_11 | parted_isvalid_tab_1_expr_idx
- parted_isvalid_tab_12_expr_idx | t          | parted_isvalid_tab_12 | parted_isvalid_tab_1_expr_idx
- parted_isvalid_tab_1_expr_idx  | f          | parted_isvalid_tab_1  | parted_isvalid_idx
- parted_isvalid_tab_2_expr_idx  | t          | parted_isvalid_tab_2  | parted_isvalid_idx
-(5 rows)
-
-drop table parted_isvalid_tab;
--- Check state of replica indexes when attaching a partition.
-begin;
-create table parted_replica_tab (id int not null) partition by range (id);
-create table parted_replica_tab_1 partition of parted_replica_tab
-  for values from (1) to (10) partition by range (id);
-create table parted_replica_tab_11 partition of parted_replica_tab_1
-  for values from (1) to (5);
-create unique index parted_replica_idx
-  on only parted_replica_tab using btree (id);
-create unique index parted_replica_idx_1
-  on only parted_replica_tab_1 using btree (id);
--- This triggers an update of pg_index.indisreplident for parted_replica_idx.
-alter table only parted_replica_tab_1 replica identity
-  using index parted_replica_idx_1;
-create unique index parted_replica_idx_11 on parted_replica_tab_11 USING btree (id);
-select indexrelid::regclass, indisvalid, indisreplident,
-       indrelid::regclass, inhparent::regclass
-  from pg_index idx left join
-       pg_inherits inh on (idx.indexrelid = inh.inhrelid)
-  where indexrelid::regclass::text like 'parted_replica%'
-  order by indexrelid::regclass::text collate "C";
-      indexrelid       | indisvalid | indisreplident |       indrelid        | inhparent 
------------------------+------------+----------------+-----------------------+-----------
- parted_replica_idx    | f          | f              | parted_replica_tab    | 
- parted_replica_idx_1  | f          | t              | parted_replica_tab_1  | 
- parted_replica_idx_11 | t          | f              | parted_replica_tab_11 | 
-(3 rows)
-
--- parted_replica_idx is not valid yet here, because parted_replica_idx_1
--- is not valid.
-alter index parted_replica_idx ATTACH PARTITION parted_replica_idx_1;
-select indexrelid::regclass, indisvalid, indisreplident,
-       indrelid::regclass, inhparent::regclass
-  from pg_index idx left join
-       pg_inherits inh on (idx.indexrelid = inh.inhrelid)
-  where indexrelid::regclass::text like 'parted_replica%'
-  order by indexrelid::regclass::text collate "C";
-      indexrelid       | indisvalid | indisreplident |       indrelid        |     inhparent      
------------------------+------------+----------------+-----------------------+--------------------
- parted_replica_idx    | f          | f              | parted_replica_tab    | 
- parted_replica_idx_1  | f          | t              | parted_replica_tab_1  | parted_replica_idx
- parted_replica_idx_11 | t          | f              | parted_replica_tab_11 | 
-(3 rows)
-
--- parted_replica_idx becomes valid here.
-alter index parted_replica_idx_1 ATTACH PARTITION parted_replica_idx_11;
-alter table only parted_replica_tab_1 replica identity
-  using index parted_replica_idx_1;
-commit;
-select indexrelid::regclass, indisvalid, indisreplident,
-       indrelid::regclass, inhparent::regclass
-  from pg_index idx left join
-       pg_inherits inh on (idx.indexrelid = inh.inhrelid)
-  where indexrelid::regclass::text like 'parted_replica%'
-  order by indexrelid::regclass::text collate "C";
-      indexrelid       | indisvalid | indisreplident |       indrelid        |      inhparent       
------------------------+------------+----------------+-----------------------+----------------------
- parted_replica_idx    | t          | f              | parted_replica_tab    | 
- parted_replica_idx_1  | t          | t              | parted_replica_tab_1  | parted_replica_idx
- parted_replica_idx_11 | t          | f              | parted_replica_tab_11 | parted_replica_idx_1
-(3 rows)
-
-drop table parted_replica_tab;
+psql: error: connection to server on socket "/tmp/f_SDOOqtof/.s.PGSQL.16412" failed: No such file or directory
+	Is the server running locally and accepting connections on that socket?
diff -U3 /tmp/cirrus-ci-build/src/test/regress/expected/partition_aggregate.out /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/partition_aggregate.out
--- /tmp/cirrus-ci-build/src/test/regress/expected/partition_aggregate.out	2024-09-20 04:07:19.050804285 +0000
+++ /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/partition_aggregate.out	2024-09-20 04:17:09.157564724 +0000
@@ -1,1520 +1,2 @@
---
--- PARTITION_AGGREGATE
--- Test partitionwise aggregation on partitioned tables
---
--- Note: to ensure plan stability, it's a good idea to make the partitions of
--- any one partitioned table in this test all have different numbers of rows.
---
--- Enable partitionwise aggregate, which by default is disabled.
-SET enable_partitionwise_aggregate TO true;
--- Enable partitionwise join, which by default is disabled.
-SET enable_partitionwise_join TO true;
--- Disable parallel plans.
-SET max_parallel_workers_per_gather TO 0;
--- Disable incremental sort, which can influence selected plans due to fuzz factor.
-SET enable_incremental_sort TO off;
---
--- Tests for list partitioned tables.
---
-CREATE TABLE pagg_tab (a int, b int, c text, d int) PARTITION BY LIST(c);
-CREATE TABLE pagg_tab_p1 PARTITION OF pagg_tab FOR VALUES IN ('0000', '0001', '0002', '0003', '0004');
-CREATE TABLE pagg_tab_p2 PARTITION OF pagg_tab FOR VALUES IN ('0005', '0006', '0007', '0008');
-CREATE TABLE pagg_tab_p3 PARTITION OF pagg_tab FOR VALUES IN ('0009', '0010', '0011');
-INSERT INTO pagg_tab SELECT i % 20, i % 30, to_char(i % 12, 'FM0000'), i % 30 FROM generate_series(0, 2999) i;
-ANALYZE pagg_tab;
--- When GROUP BY clause matches; full aggregation is performed for each partition.
-EXPLAIN (COSTS OFF)
-SELECT c, sum(a), avg(b), count(*), min(a), max(b) FROM pagg_tab GROUP BY c HAVING avg(d) < 15 ORDER BY 1, 2, 3;
-                          QUERY PLAN                          
---------------------------------------------------------------
- Sort
-   Sort Key: pagg_tab.c, (sum(pagg_tab.a)), (avg(pagg_tab.b))
-   ->  Append
-         ->  HashAggregate
-               Group Key: pagg_tab.c
-               Filter: (avg(pagg_tab.d) < '15'::numeric)
-               ->  Seq Scan on pagg_tab_p1 pagg_tab
-         ->  HashAggregate
-               Group Key: pagg_tab_1.c
-               Filter: (avg(pagg_tab_1.d) < '15'::numeric)
-               ->  Seq Scan on pagg_tab_p2 pagg_tab_1
-         ->  HashAggregate
-               Group Key: pagg_tab_2.c
-               Filter: (avg(pagg_tab_2.d) < '15'::numeric)
-               ->  Seq Scan on pagg_tab_p3 pagg_tab_2
-(15 rows)
-
-SELECT c, sum(a), avg(b), count(*), min(a), max(b) FROM pagg_tab GROUP BY c HAVING avg(d) < 15 ORDER BY 1, 2, 3;
-  c   | sum  |         avg         | count | min | max 
-------+------+---------------------+-------+-----+-----
- 0000 | 2000 | 12.0000000000000000 |   250 |   0 |  24
- 0001 | 2250 | 13.0000000000000000 |   250 |   1 |  25
- 0002 | 2500 | 14.0000000000000000 |   250 |   2 |  26
- 0006 | 2500 | 12.0000000000000000 |   250 |   2 |  24
- 0007 | 2750 | 13.0000000000000000 |   250 |   3 |  25
- 0008 | 2000 | 14.0000000000000000 |   250 |   0 |  26
-(6 rows)
-
--- When GROUP BY clause does not match; partial aggregation is performed for each partition.
-EXPLAIN (COSTS OFF)
-SELECT a, sum(b), avg(b), count(*), min(a), max(b) FROM pagg_tab GROUP BY a HAVING avg(d) < 15 ORDER BY 1, 2, 3;
-                          QUERY PLAN                          
---------------------------------------------------------------
- Sort
-   Sort Key: pagg_tab.a, (sum(pagg_tab.b)), (avg(pagg_tab.b))
-   ->  Finalize HashAggregate
-         Group Key: pagg_tab.a
-         Filter: (avg(pagg_tab.d) < '15'::numeric)
-         ->  Append
-               ->  Partial HashAggregate
-                     Group Key: pagg_tab.a
-                     ->  Seq Scan on pagg_tab_p1 pagg_tab
-               ->  Partial HashAggregate
-                     Group Key: pagg_tab_1.a
-                     ->  Seq Scan on pagg_tab_p2 pagg_tab_1
-               ->  Partial HashAggregate
-                     Group Key: pagg_tab_2.a
-                     ->  Seq Scan on pagg_tab_p3 pagg_tab_2
-(15 rows)
-
-SELECT a, sum(b), avg(b), count(*), min(a), max(b) FROM pagg_tab GROUP BY a HAVING avg(d) < 15 ORDER BY 1, 2, 3;
- a  | sum  |         avg         | count | min | max 
-----+------+---------------------+-------+-----+-----
-  0 | 1500 | 10.0000000000000000 |   150 |   0 |  20
-  1 | 1650 | 11.0000000000000000 |   150 |   1 |  21
-  2 | 1800 | 12.0000000000000000 |   150 |   2 |  22
-  3 | 1950 | 13.0000000000000000 |   150 |   3 |  23
-  4 | 2100 | 14.0000000000000000 |   150 |   4 |  24
- 10 | 1500 | 10.0000000000000000 |   150 |  10 |  20
- 11 | 1650 | 11.0000000000000000 |   150 |  11 |  21
- 12 | 1800 | 12.0000000000000000 |   150 |  12 |  22
- 13 | 1950 | 13.0000000000000000 |   150 |  13 |  23
- 14 | 2100 | 14.0000000000000000 |   150 |  14 |  24
-(10 rows)
-
--- Check with multiple columns in GROUP BY
-EXPLAIN (COSTS OFF)
-SELECT a, c, count(*) FROM pagg_tab GROUP BY a, c;
-                   QUERY PLAN                   
-------------------------------------------------
- Append
-   ->  HashAggregate
-         Group Key: pagg_tab.a, pagg_tab.c
-         ->  Seq Scan on pagg_tab_p1 pagg_tab
-   ->  HashAggregate
-         Group Key: pagg_tab_1.a, pagg_tab_1.c
-         ->  Seq Scan on pagg_tab_p2 pagg_tab_1
-   ->  HashAggregate
-         Group Key: pagg_tab_2.a, pagg_tab_2.c
-         ->  Seq Scan on pagg_tab_p3 pagg_tab_2
-(10 rows)
-
--- Check with multiple columns in GROUP BY, order in GROUP BY is reversed
-EXPLAIN (COSTS OFF)
-SELECT a, c, count(*) FROM pagg_tab GROUP BY c, a;
-                   QUERY PLAN                   
-------------------------------------------------
- Append
-   ->  HashAggregate
-         Group Key: pagg_tab.c, pagg_tab.a
-         ->  Seq Scan on pagg_tab_p1 pagg_tab
-   ->  HashAggregate
-         Group Key: pagg_tab_1.c, pagg_tab_1.a
-         ->  Seq Scan on pagg_tab_p2 pagg_tab_1
-   ->  HashAggregate
-         Group Key: pagg_tab_2.c, pagg_tab_2.a
-         ->  Seq Scan on pagg_tab_p3 pagg_tab_2
-(10 rows)
-
--- Check with multiple columns in GROUP BY, order in target-list is reversed
-EXPLAIN (COSTS OFF)
-SELECT c, a, count(*) FROM pagg_tab GROUP BY a, c;
-                   QUERY PLAN                   
-------------------------------------------------
- Append
-   ->  HashAggregate
-         Group Key: pagg_tab.a, pagg_tab.c
-         ->  Seq Scan on pagg_tab_p1 pagg_tab
-   ->  HashAggregate
-         Group Key: pagg_tab_1.a, pagg_tab_1.c
-         ->  Seq Scan on pagg_tab_p2 pagg_tab_1
-   ->  HashAggregate
-         Group Key: pagg_tab_2.a, pagg_tab_2.c
-         ->  Seq Scan on pagg_tab_p3 pagg_tab_2
-(10 rows)
-
--- Test when input relation for grouping is dummy
-EXPLAIN (COSTS OFF)
-SELECT c, sum(a) FROM pagg_tab WHERE 1 = 2 GROUP BY c;
-           QUERY PLAN           
---------------------------------
- HashAggregate
-   Group Key: c
-   ->  Result
-         One-Time Filter: false
-(4 rows)
-
-SELECT c, sum(a) FROM pagg_tab WHERE 1 = 2 GROUP BY c;
- c | sum 
----+-----
-(0 rows)
-
-EXPLAIN (COSTS OFF)
-SELECT c, sum(a) FROM pagg_tab WHERE c = 'x' GROUP BY c;
-           QUERY PLAN           
---------------------------------
- GroupAggregate
-   ->  Result
-         One-Time Filter: false
-(3 rows)
-
-SELECT c, sum(a) FROM pagg_tab WHERE c = 'x' GROUP BY c;
- c | sum 
----+-----
-(0 rows)
-
--- Test GroupAggregate paths by disabling hash aggregates.
-SET enable_hashagg TO false;
--- When GROUP BY clause matches full aggregation is performed for each partition.
-EXPLAIN (COSTS OFF)
-SELECT c, sum(a), avg(b), count(*) FROM pagg_tab GROUP BY 1 HAVING avg(d) < 15 ORDER BY 1, 2, 3;
-                          QUERY PLAN                          
---------------------------------------------------------------
- Sort
-   Sort Key: pagg_tab.c, (sum(pagg_tab.a)), (avg(pagg_tab.b))
-   ->  Append
-         ->  GroupAggregate
-               Group Key: pagg_tab.c
-               Filter: (avg(pagg_tab.d) < '15'::numeric)
-               ->  Sort
-                     Sort Key: pagg_tab.c
-                     ->  Seq Scan on pagg_tab_p1 pagg_tab
-         ->  GroupAggregate
-               Group Key: pagg_tab_1.c
-               Filter: (avg(pagg_tab_1.d) < '15'::numeric)
-               ->  Sort
-                     Sort Key: pagg_tab_1.c
-                     ->  Seq Scan on pagg_tab_p2 pagg_tab_1
-         ->  GroupAggregate
-               Group Key: pagg_tab_2.c
-               Filter: (avg(pagg_tab_2.d) < '15'::numeric)
-               ->  Sort
-                     Sort Key: pagg_tab_2.c
-                     ->  Seq Scan on pagg_tab_p3 pagg_tab_2
-(21 rows)
-
-SELECT c, sum(a), avg(b), count(*) FROM pagg_tab GROUP BY 1 HAVING avg(d) < 15 ORDER BY 1, 2, 3;
-  c   | sum  |         avg         | count 
-------+------+---------------------+-------
- 0000 | 2000 | 12.0000000000000000 |   250
- 0001 | 2250 | 13.0000000000000000 |   250
- 0002 | 2500 | 14.0000000000000000 |   250
- 0006 | 2500 | 12.0000000000000000 |   250
- 0007 | 2750 | 13.0000000000000000 |   250
- 0008 | 2000 | 14.0000000000000000 |   250
-(6 rows)
-
--- When GROUP BY clause does not match; partial aggregation is performed for each partition.
-EXPLAIN (COSTS OFF)
-SELECT a, sum(b), avg(b), count(*) FROM pagg_tab GROUP BY 1 HAVING avg(d) < 15 ORDER BY 1, 2, 3;
-                            QUERY PLAN                            
-------------------------------------------------------------------
- Sort
-   Sort Key: pagg_tab.a, (sum(pagg_tab.b)), (avg(pagg_tab.b))
-   ->  Finalize GroupAggregate
-         Group Key: pagg_tab.a
-         Filter: (avg(pagg_tab.d) < '15'::numeric)
-         ->  Merge Append
-               Sort Key: pagg_tab.a
-               ->  Partial GroupAggregate
-                     Group Key: pagg_tab.a
-                     ->  Sort
-                           Sort Key: pagg_tab.a
-                           ->  Seq Scan on pagg_tab_p1 pagg_tab
-               ->  Partial GroupAggregate
-                     Group Key: pagg_tab_1.a
-                     ->  Sort
-                           Sort Key: pagg_tab_1.a
-                           ->  Seq Scan on pagg_tab_p2 pagg_tab_1
-               ->  Partial GroupAggregate
-                     Group Key: pagg_tab_2.a
-                     ->  Sort
-                           Sort Key: pagg_tab_2.a
-                           ->  Seq Scan on pagg_tab_p3 pagg_tab_2
-(22 rows)
-
-SELECT a, sum(b), avg(b), count(*) FROM pagg_tab GROUP BY 1 HAVING avg(d) < 15 ORDER BY 1, 2, 3;
- a  | sum  |         avg         | count 
-----+------+---------------------+-------
-  0 | 1500 | 10.0000000000000000 |   150
-  1 | 1650 | 11.0000000000000000 |   150
-  2 | 1800 | 12.0000000000000000 |   150
-  3 | 1950 | 13.0000000000000000 |   150
-  4 | 2100 | 14.0000000000000000 |   150
- 10 | 1500 | 10.0000000000000000 |   150
- 11 | 1650 | 11.0000000000000000 |   150
- 12 | 1800 | 12.0000000000000000 |   150
- 13 | 1950 | 13.0000000000000000 |   150
- 14 | 2100 | 14.0000000000000000 |   150
-(10 rows)
-
--- Test partitionwise grouping without any aggregates
-EXPLAIN (COSTS OFF)
-SELECT c FROM pagg_tab GROUP BY c ORDER BY 1;
-                      QUERY PLAN                      
-------------------------------------------------------
- Merge Append
-   Sort Key: pagg_tab.c
-   ->  Group
-         Group Key: pagg_tab.c
-         ->  Sort
-               Sort Key: pagg_tab.c
-               ->  Seq Scan on pagg_tab_p1 pagg_tab
-   ->  Group
-         Group Key: pagg_tab_1.c
-         ->  Sort
-               Sort Key: pagg_tab_1.c
-               ->  Seq Scan on pagg_tab_p2 pagg_tab_1
-   ->  Group
-         Group Key: pagg_tab_2.c
-         ->  Sort
-               Sort Key: pagg_tab_2.c
-               ->  Seq Scan on pagg_tab_p3 pagg_tab_2
-(17 rows)
-
-SELECT c FROM pagg_tab GROUP BY c ORDER BY 1;
-  c   
-------
- 0000
- 0001
- 0002
- 0003
- 0004
- 0005
- 0006
- 0007
- 0008
- 0009
- 0010
- 0011
-(12 rows)
-
-EXPLAIN (COSTS OFF)
-SELECT a FROM pagg_tab WHERE a < 3 GROUP BY a ORDER BY 1;
-                         QUERY PLAN                         
-------------------------------------------------------------
- Group
-   Group Key: pagg_tab.a
-   ->  Merge Append
-         Sort Key: pagg_tab.a
-         ->  Group
-               Group Key: pagg_tab.a
-               ->  Sort
-                     Sort Key: pagg_tab.a
-                     ->  Seq Scan on pagg_tab_p1 pagg_tab
-                           Filter: (a < 3)
-         ->  Group
-               Group Key: pagg_tab_1.a
-               ->  Sort
-                     Sort Key: pagg_tab_1.a
-                     ->  Seq Scan on pagg_tab_p2 pagg_tab_1
-                           Filter: (a < 3)
-         ->  Group
-               Group Key: pagg_tab_2.a
-               ->  Sort
-                     Sort Key: pagg_tab_2.a
-                     ->  Seq Scan on pagg_tab_p3 pagg_tab_2
-                           Filter: (a < 3)
-(22 rows)
-
-SELECT a FROM pagg_tab WHERE a < 3 GROUP BY a ORDER BY 1;
- a 
----
- 0
- 1
- 2
-(3 rows)
-
-RESET enable_hashagg;
--- ROLLUP, partitionwise aggregation does not apply
-EXPLAIN (COSTS OFF)
-SELECT c, sum(a) FROM pagg_tab GROUP BY rollup(c) ORDER BY 1, 2;
-                      QUERY PLAN                      
-------------------------------------------------------
- Sort
-   Sort Key: pagg_tab.c, (sum(pagg_tab.a))
-   ->  MixedAggregate
-         Hash Key: pagg_tab.c
-         Group Key: ()
-         ->  Append
-               ->  Seq Scan on pagg_tab_p1 pagg_tab_1
-               ->  Seq Scan on pagg_tab_p2 pagg_tab_2
-               ->  Seq Scan on pagg_tab_p3 pagg_tab_3
-(9 rows)
-
--- ORDERED SET within the aggregate.
--- Full aggregation; since all the rows that belong to the same group come
--- from the same partition, having an ORDER BY within the aggregate doesn't
--- make any difference.
-EXPLAIN (COSTS OFF)
-SELECT c, sum(b order by a) FROM pagg_tab GROUP BY c ORDER BY 1, 2;
-                          QUERY PLAN                           
----------------------------------------------------------------
- Sort
-   Sort Key: pagg_tab.c, (sum(pagg_tab.b ORDER BY pagg_tab.a))
-   ->  Append
-         ->  GroupAggregate
-               Group Key: pagg_tab.c
-               ->  Sort
-                     Sort Key: pagg_tab.c, pagg_tab.a
-                     ->  Seq Scan on pagg_tab_p1 pagg_tab
-         ->  GroupAggregate
-               Group Key: pagg_tab_1.c
-               ->  Sort
-                     Sort Key: pagg_tab_1.c, pagg_tab_1.a
-                     ->  Seq Scan on pagg_tab_p2 pagg_tab_1
-         ->  GroupAggregate
-               Group Key: pagg_tab_2.c
-               ->  Sort
-                     Sort Key: pagg_tab_2.c, pagg_tab_2.a
-                     ->  Seq Scan on pagg_tab_p3 pagg_tab_2
-(18 rows)
-
--- Since GROUP BY clause does not match with PARTITION KEY; we need to do
--- partial aggregation. However, ORDERED SET are not partial safe and thus
--- partitionwise aggregation plan is not generated.
-EXPLAIN (COSTS OFF)
-SELECT a, sum(b order by a) FROM pagg_tab GROUP BY a ORDER BY 1, 2;
-                          QUERY PLAN                           
----------------------------------------------------------------
- Sort
-   Sort Key: pagg_tab.a, (sum(pagg_tab.b ORDER BY pagg_tab.a))
-   ->  GroupAggregate
-         Group Key: pagg_tab.a
-         ->  Sort
-               Sort Key: pagg_tab.a
-               ->  Append
-                     ->  Seq Scan on pagg_tab_p1 pagg_tab_1
-                     ->  Seq Scan on pagg_tab_p2 pagg_tab_2
-                     ->  Seq Scan on pagg_tab_p3 pagg_tab_3
-(10 rows)
-
--- JOIN query
-CREATE TABLE pagg_tab1(x int, y int) PARTITION BY RANGE(x);
-CREATE TABLE pagg_tab1_p1 PARTITION OF pagg_tab1 FOR VALUES FROM (0) TO (10);
-CREATE TABLE pagg_tab1_p2 PARTITION OF pagg_tab1 FOR VALUES FROM (10) TO (20);
-CREATE TABLE pagg_tab1_p3 PARTITION OF pagg_tab1 FOR VALUES FROM (20) TO (30);
-CREATE TABLE pagg_tab2(x int, y int) PARTITION BY RANGE(y);
-CREATE TABLE pagg_tab2_p1 PARTITION OF pagg_tab2 FOR VALUES FROM (0) TO (10);
-CREATE TABLE pagg_tab2_p2 PARTITION OF pagg_tab2 FOR VALUES FROM (10) TO (20);
-CREATE TABLE pagg_tab2_p3 PARTITION OF pagg_tab2 FOR VALUES FROM (20) TO (30);
-INSERT INTO pagg_tab1 SELECT i % 30, i % 20 FROM generate_series(0, 299, 2) i;
-INSERT INTO pagg_tab2 SELECT i % 20, i % 30 FROM generate_series(0, 299, 3) i;
-ANALYZE pagg_tab1;
-ANALYZE pagg_tab2;
--- When GROUP BY clause matches; full aggregation is performed for each partition.
-EXPLAIN (COSTS OFF)
-SELECT t1.x, sum(t1.y), count(*) FROM pagg_tab1 t1, pagg_tab2 t2 WHERE t1.x = t2.y GROUP BY t1.x ORDER BY 1, 2, 3;
-                         QUERY PLAN                          
--------------------------------------------------------------
- Sort
-   Sort Key: t1.x, (sum(t1.y)), (count(*))
-   ->  Append
-         ->  HashAggregate
-               Group Key: t1.x
-               ->  Hash Join
-                     Hash Cond: (t1.x = t2.y)
-                     ->  Seq Scan on pagg_tab1_p1 t1
-                     ->  Hash
-                           ->  Seq Scan on pagg_tab2_p1 t2
-         ->  HashAggregate
-               Group Key: t1_1.x
-               ->  Hash Join
-                     Hash Cond: (t1_1.x = t2_1.y)
-                     ->  Seq Scan on pagg_tab1_p2 t1_1
-                     ->  Hash
-                           ->  Seq Scan on pagg_tab2_p2 t2_1
-         ->  HashAggregate
-               Group Key: t1_2.x
-               ->  Hash Join
-                     Hash Cond: (t2_2.y = t1_2.x)
-                     ->  Seq Scan on pagg_tab2_p3 t2_2
-                     ->  Hash
-                           ->  Seq Scan on pagg_tab1_p3 t1_2
-(24 rows)
-
-SELECT t1.x, sum(t1.y), count(*) FROM pagg_tab1 t1, pagg_tab2 t2 WHERE t1.x = t2.y GROUP BY t1.x ORDER BY 1, 2, 3;
- x  | sum  | count 
-----+------+-------
-  0 |  500 |   100
-  6 | 1100 |   100
- 12 |  700 |   100
- 18 | 1300 |   100
- 24 |  900 |   100
-(5 rows)
-
--- Check with whole-row reference; partitionwise aggregation does not apply
-EXPLAIN (COSTS OFF)
-SELECT t1.x, sum(t1.y), count(t1) FROM pagg_tab1 t1, pagg_tab2 t2 WHERE t1.x = t2.y GROUP BY t1.x ORDER BY 1, 2, 3;
-                         QUERY PLAN                          
--------------------------------------------------------------
- Sort
-   Sort Key: t1.x, (sum(t1.y)), (count(((t1.*)::pagg_tab1)))
-   ->  HashAggregate
-         Group Key: t1.x
-         ->  Hash Join
-               Hash Cond: (t1.x = t2.y)
-               ->  Append
-                     ->  Seq Scan on pagg_tab1_p1 t1_1
-                     ->  Seq Scan on pagg_tab1_p2 t1_2
-                     ->  Seq Scan on pagg_tab1_p3 t1_3
-               ->  Hash
-                     ->  Append
-                           ->  Seq Scan on pagg_tab2_p1 t2_1
-                           ->  Seq Scan on pagg_tab2_p2 t2_2
-                           ->  Seq Scan on pagg_tab2_p3 t2_3
-(15 rows)
-
-SELECT t1.x, sum(t1.y), count(t1) FROM pagg_tab1 t1, pagg_tab2 t2 WHERE t1.x = t2.y GROUP BY t1.x ORDER BY 1, 2, 3;
- x  | sum  | count 
-----+------+-------
-  0 |  500 |   100
-  6 | 1100 |   100
- 12 |  700 |   100
- 18 | 1300 |   100
- 24 |  900 |   100
-(5 rows)
-
--- GROUP BY having other matching key
-EXPLAIN (COSTS OFF)
-SELECT t2.y, sum(t1.y), count(*) FROM pagg_tab1 t1, pagg_tab2 t2 WHERE t1.x = t2.y GROUP BY t2.y ORDER BY 1, 2, 3;
-                         QUERY PLAN                          
--------------------------------------------------------------
- Sort
-   Sort Key: t2.y, (sum(t1.y)), (count(*))
-   ->  Append
-         ->  HashAggregate
-               Group Key: t2.y
-               ->  Hash Join
-                     Hash Cond: (t1.x = t2.y)
-                     ->  Seq Scan on pagg_tab1_p1 t1
-                     ->  Hash
-                           ->  Seq Scan on pagg_tab2_p1 t2
-         ->  HashAggregate
-               Group Key: t2_1.y
-               ->  Hash Join
-                     Hash Cond: (t1_1.x = t2_1.y)
-                     ->  Seq Scan on pagg_tab1_p2 t1_1
-                     ->  Hash
-                           ->  Seq Scan on pagg_tab2_p2 t2_1
-         ->  HashAggregate
-               Group Key: t2_2.y
-               ->  Hash Join
-                     Hash Cond: (t2_2.y = t1_2.x)
-                     ->  Seq Scan on pagg_tab2_p3 t2_2
-                     ->  Hash
-                           ->  Seq Scan on pagg_tab1_p3 t1_2
-(24 rows)
-
--- When GROUP BY clause does not match; partial aggregation is performed for each partition.
--- Also test GroupAggregate paths by disabling hash aggregates.
-SET enable_hashagg TO false;
-EXPLAIN (COSTS OFF)
-SELECT t1.y, sum(t1.x), count(*) FROM pagg_tab1 t1, pagg_tab2 t2 WHERE t1.x = t2.y GROUP BY t1.y HAVING avg(t1.x) > 10 ORDER BY 1, 2, 3;
-                               QUERY PLAN                                
--------------------------------------------------------------------------
- Sort
-   Sort Key: t1.y, (sum(t1.x)), (count(*))
-   ->  Finalize GroupAggregate
-         Group Key: t1.y
-         Filter: (avg(t1.x) > '10'::numeric)
-         ->  Merge Append
-               Sort Key: t1.y
-               ->  Partial GroupAggregate
-                     Group Key: t1.y
-                     ->  Sort
-                           Sort Key: t1.y
-                           ->  Hash Join
-                                 Hash Cond: (t1.x = t2.y)
-                                 ->  Seq Scan on pagg_tab1_p1 t1
-                                 ->  Hash
-                                       ->  Seq Scan on pagg_tab2_p1 t2
-               ->  Partial GroupAggregate
-                     Group Key: t1_1.y
-                     ->  Sort
-                           Sort Key: t1_1.y
-                           ->  Hash Join
-                                 Hash Cond: (t1_1.x = t2_1.y)
-                                 ->  Seq Scan on pagg_tab1_p2 t1_1
-                                 ->  Hash
-                                       ->  Seq Scan on pagg_tab2_p2 t2_1
-               ->  Partial GroupAggregate
-                     Group Key: t1_2.y
-                     ->  Sort
-                           Sort Key: t1_2.y
-                           ->  Hash Join
-                                 Hash Cond: (t2_2.y = t1_2.x)
-                                 ->  Seq Scan on pagg_tab2_p3 t2_2
-                                 ->  Hash
-                                       ->  Seq Scan on pagg_tab1_p3 t1_2
-(34 rows)
-
-SELECT t1.y, sum(t1.x), count(*) FROM pagg_tab1 t1, pagg_tab2 t2 WHERE t1.x = t2.y GROUP BY t1.y HAVING avg(t1.x) > 10 ORDER BY 1, 2, 3;
- y  | sum  | count 
-----+------+-------
-  2 |  600 |    50
-  4 | 1200 |    50
-  8 |  900 |    50
- 12 |  600 |    50
- 14 | 1200 |    50
- 18 |  900 |    50
-(6 rows)
-
-RESET enable_hashagg;
--- Check with LEFT/RIGHT/FULL OUTER JOINs which produces NULL values for
--- aggregation
--- LEFT JOIN, should produce partial partitionwise aggregation plan as
--- GROUP BY is on nullable column
-EXPLAIN (COSTS OFF)
-SELECT b.y, sum(a.y) FROM pagg_tab1 a LEFT JOIN pagg_tab2 b ON a.x = b.y GROUP BY b.y ORDER BY 1 NULLS LAST;
-                            QUERY PLAN                            
-------------------------------------------------------------------
- Finalize GroupAggregate
-   Group Key: b.y
-   ->  Sort
-         Sort Key: b.y
-         ->  Append
-               ->  Partial HashAggregate
-                     Group Key: b.y
-                     ->  Hash Left Join
-                           Hash Cond: (a.x = b.y)
-                           ->  Seq Scan on pagg_tab1_p1 a
-                           ->  Hash
-                                 ->  Seq Scan on pagg_tab2_p1 b
-               ->  Partial HashAggregate
-                     Group Key: b_1.y
-                     ->  Hash Left Join
-                           Hash Cond: (a_1.x = b_1.y)
-                           ->  Seq Scan on pagg_tab1_p2 a_1
-                           ->  Hash
-                                 ->  Seq Scan on pagg_tab2_p2 b_1
-               ->  Partial HashAggregate
-                     Group Key: b_2.y
-                     ->  Hash Right Join
-                           Hash Cond: (b_2.y = a_2.x)
-                           ->  Seq Scan on pagg_tab2_p3 b_2
-                           ->  Hash
-                                 ->  Seq Scan on pagg_tab1_p3 a_2
-(26 rows)
-
-SELECT b.y, sum(a.y) FROM pagg_tab1 a LEFT JOIN pagg_tab2 b ON a.x = b.y GROUP BY b.y ORDER BY 1 NULLS LAST;
- y  | sum  
-----+------
-  0 |  500
-  6 | 1100
- 12 |  700
- 18 | 1300
- 24 |  900
-    |  900
-(6 rows)
-
--- RIGHT JOIN, should produce full partitionwise aggregation plan as
--- GROUP BY is on non-nullable column
-EXPLAIN (COSTS OFF)
-SELECT b.y, sum(a.y) FROM pagg_tab1 a RIGHT JOIN pagg_tab2 b ON a.x = b.y GROUP BY b.y ORDER BY 1 NULLS LAST;
-                         QUERY PLAN                         
-------------------------------------------------------------
- Sort
-   Sort Key: b.y
-   ->  Append
-         ->  HashAggregate
-               Group Key: b.y
-               ->  Hash Right Join
-                     Hash Cond: (a.x = b.y)
-                     ->  Seq Scan on pagg_tab1_p1 a
-                     ->  Hash
-                           ->  Seq Scan on pagg_tab2_p1 b
-         ->  HashAggregate
-               Group Key: b_1.y
-               ->  Hash Right Join
-                     Hash Cond: (a_1.x = b_1.y)
-                     ->  Seq Scan on pagg_tab1_p2 a_1
-                     ->  Hash
-                           ->  Seq Scan on pagg_tab2_p2 b_1
-         ->  HashAggregate
-               Group Key: b_2.y
-               ->  Hash Left Join
-                     Hash Cond: (b_2.y = a_2.x)
-                     ->  Seq Scan on pagg_tab2_p3 b_2
-                     ->  Hash
-                           ->  Seq Scan on pagg_tab1_p3 a_2
-(24 rows)
-
-SELECT b.y, sum(a.y) FROM pagg_tab1 a RIGHT JOIN pagg_tab2 b ON a.x = b.y GROUP BY b.y ORDER BY 1 NULLS LAST;
- y  | sum  
-----+------
-  0 |  500
-  3 |     
-  6 | 1100
-  9 |     
- 12 |  700
- 15 |     
- 18 | 1300
- 21 |     
- 24 |  900
- 27 |     
-(10 rows)
-
--- FULL JOIN, should produce partial partitionwise aggregation plan as
--- GROUP BY is on nullable column
-EXPLAIN (COSTS OFF)
-SELECT a.x, sum(b.x) FROM pagg_tab1 a FULL OUTER JOIN pagg_tab2 b ON a.x = b.y GROUP BY a.x ORDER BY 1 NULLS LAST;
-                            QUERY PLAN                            
-------------------------------------------------------------------
- Finalize GroupAggregate
-   Group Key: a.x
-   ->  Sort
-         Sort Key: a.x
-         ->  Append
-               ->  Partial HashAggregate
-                     Group Key: a.x
-                     ->  Hash Full Join
-                           Hash Cond: (a.x = b.y)
-                           ->  Seq Scan on pagg_tab1_p1 a
-                           ->  Hash
-                                 ->  Seq Scan on pagg_tab2_p1 b
-               ->  Partial HashAggregate
-                     Group Key: a_1.x
-                     ->  Hash Full Join
-                           Hash Cond: (a_1.x = b_1.y)
-                           ->  Seq Scan on pagg_tab1_p2 a_1
-                           ->  Hash
-                                 ->  Seq Scan on pagg_tab2_p2 b_1
-               ->  Partial HashAggregate
-                     Group Key: a_2.x
-                     ->  Hash Full Join
-                           Hash Cond: (b_2.y = a_2.x)
-                           ->  Seq Scan on pagg_tab2_p3 b_2
-                           ->  Hash
-                                 ->  Seq Scan on pagg_tab1_p3 a_2
-(26 rows)
-
-SELECT a.x, sum(b.x) FROM pagg_tab1 a FULL OUTER JOIN pagg_tab2 b ON a.x = b.y GROUP BY a.x ORDER BY 1 NULLS LAST;
- x  | sum  
-----+------
-  0 |  500
-  2 |     
-  4 |     
-  6 | 1100
-  8 |     
- 10 |     
- 12 |  700
- 14 |     
- 16 |     
- 18 | 1300
- 20 |     
- 22 |     
- 24 |  900
- 26 |     
- 28 |     
-    |  500
-(16 rows)
-
--- LEFT JOIN, with dummy relation on right side, ideally
--- should produce full partitionwise aggregation plan as GROUP BY is on
--- non-nullable columns.
--- But right now we are unable to do partitionwise join in this case.
-EXPLAIN (COSTS OFF)
-SELECT a.x, b.y, count(*) FROM (SELECT * FROM pagg_tab1 WHERE x < 20) a LEFT JOIN (SELECT * FROM pagg_tab2 WHERE y > 10) b ON a.x = b.y WHERE a.x > 5 or b.y < 20  GROUP BY a.x, b.y ORDER BY 1, 2;
-                             QUERY PLAN                             
---------------------------------------------------------------------
- Sort
-   Sort Key: pagg_tab1.x, pagg_tab2.y
-   ->  HashAggregate
-         Group Key: pagg_tab1.x, pagg_tab2.y
-         ->  Hash Left Join
-               Hash Cond: (pagg_tab1.x = pagg_tab2.y)
-               Filter: ((pagg_tab1.x > 5) OR (pagg_tab2.y < 20))
-               ->  Append
-                     ->  Seq Scan on pagg_tab1_p1 pagg_tab1_1
-                           Filter: (x < 20)
-                     ->  Seq Scan on pagg_tab1_p2 pagg_tab1_2
-                           Filter: (x < 20)
-               ->  Hash
-                     ->  Append
-                           ->  Seq Scan on pagg_tab2_p2 pagg_tab2_1
-                                 Filter: (y > 10)
-                           ->  Seq Scan on pagg_tab2_p3 pagg_tab2_2
-                                 Filter: (y > 10)
-(18 rows)
-
-SELECT a.x, b.y, count(*) FROM (SELECT * FROM pagg_tab1 WHERE x < 20) a LEFT JOIN (SELECT * FROM pagg_tab2 WHERE y > 10) b ON a.x = b.y WHERE a.x > 5 or b.y < 20  GROUP BY a.x, b.y ORDER BY 1, 2;
- x  | y  | count 
-----+----+-------
-  6 |    |    10
-  8 |    |    10
- 10 |    |    10
- 12 | 12 |   100
- 14 |    |    10
- 16 |    |    10
- 18 | 18 |   100
-(7 rows)
-
--- FULL JOIN, with dummy relations on both sides, ideally
--- should produce partial partitionwise aggregation plan as GROUP BY is on
--- nullable columns.
--- But right now we are unable to do partitionwise join in this case.
-EXPLAIN (COSTS OFF)
-SELECT a.x, b.y, count(*) FROM (SELECT * FROM pagg_tab1 WHERE x < 20) a FULL JOIN (SELECT * FROM pagg_tab2 WHERE y > 10) b ON a.x = b.y WHERE a.x > 5 or b.y < 20  GROUP BY a.x, b.y ORDER BY 1, 2;
-                             QUERY PLAN                             
---------------------------------------------------------------------
- Sort
-   Sort Key: pagg_tab1.x, pagg_tab2.y
-   ->  HashAggregate
-         Group Key: pagg_tab1.x, pagg_tab2.y
-         ->  Hash Full Join
-               Hash Cond: (pagg_tab1.x = pagg_tab2.y)
-               Filter: ((pagg_tab1.x > 5) OR (pagg_tab2.y < 20))
-               ->  Append
-                     ->  Seq Scan on pagg_tab1_p1 pagg_tab1_1
-                           Filter: (x < 20)
-                     ->  Seq Scan on pagg_tab1_p2 pagg_tab1_2
-                           Filter: (x < 20)
-               ->  Hash
-                     ->  Append
-                           ->  Seq Scan on pagg_tab2_p2 pagg_tab2_1
-                                 Filter: (y > 10)
-                           ->  Seq Scan on pagg_tab2_p3 pagg_tab2_2
-                                 Filter: (y > 10)
-(18 rows)
-
-SELECT a.x, b.y, count(*) FROM (SELECT * FROM pagg_tab1 WHERE x < 20) a FULL JOIN (SELECT * FROM pagg_tab2 WHERE y > 10) b ON a.x = b.y WHERE a.x > 5 or b.y < 20 GROUP BY a.x, b.y ORDER BY 1, 2;
- x  | y  | count 
-----+----+-------
-  6 |    |    10
-  8 |    |    10
- 10 |    |    10
- 12 | 12 |   100
- 14 |    |    10
- 16 |    |    10
- 18 | 18 |   100
-    | 15 |    10
-(8 rows)
-
--- Empty join relation because of empty outer side, no partitionwise agg plan
-EXPLAIN (COSTS OFF)
-SELECT a.x, a.y, count(*) FROM (SELECT * FROM pagg_tab1 WHERE x = 1 AND x = 2) a LEFT JOIN pagg_tab2 b ON a.x = b.y GROUP BY a.x, a.y ORDER BY 1, 2;
-              QUERY PLAN              
---------------------------------------
- GroupAggregate
-   Group Key: pagg_tab1.y
-   ->  Sort
-         Sort Key: pagg_tab1.y
-         ->  Result
-               One-Time Filter: false
-(6 rows)
-
-SELECT a.x, a.y, count(*) FROM (SELECT * FROM pagg_tab1 WHERE x = 1 AND x = 2) a LEFT JOIN pagg_tab2 b ON a.x = b.y GROUP BY a.x, a.y ORDER BY 1, 2;
- x | y | count 
----+---+-------
-(0 rows)
-
--- Partition by multiple columns
-CREATE TABLE pagg_tab_m (a int, b int, c int) PARTITION BY RANGE(a, ((a+b)/2));
-CREATE TABLE pagg_tab_m_p1 PARTITION OF pagg_tab_m FOR VALUES FROM (0, 0) TO (12, 12);
-CREATE TABLE pagg_tab_m_p2 PARTITION OF pagg_tab_m FOR VALUES FROM (12, 12) TO (22, 22);
-CREATE TABLE pagg_tab_m_p3 PARTITION OF pagg_tab_m FOR VALUES FROM (22, 22) TO (30, 30);
-INSERT INTO pagg_tab_m SELECT i % 30, i % 40, i % 50 FROM generate_series(0, 2999) i;
-ANALYZE pagg_tab_m;
--- Partial aggregation as GROUP BY clause does not match with PARTITION KEY
-EXPLAIN (COSTS OFF)
-SELECT a, sum(b), avg(c), count(*) FROM pagg_tab_m GROUP BY a HAVING avg(c) < 22 ORDER BY 1, 2, 3;
-                             QUERY PLAN                             
---------------------------------------------------------------------
- Sort
-   Sort Key: pagg_tab_m.a, (sum(pagg_tab_m.b)), (avg(pagg_tab_m.c))
-   ->  Finalize HashAggregate
-         Group Key: pagg_tab_m.a
-         Filter: (avg(pagg_tab_m.c) < '22'::numeric)
-         ->  Append
-               ->  Partial HashAggregate
-                     Group Key: pagg_tab_m.a
-                     ->  Seq Scan on pagg_tab_m_p1 pagg_tab_m
-               ->  Partial HashAggregate
-                     Group Key: pagg_tab_m_1.a
-                     ->  Seq Scan on pagg_tab_m_p2 pagg_tab_m_1
-               ->  Partial HashAggregate
-                     Group Key: pagg_tab_m_2.a
-                     ->  Seq Scan on pagg_tab_m_p3 pagg_tab_m_2
-(15 rows)
-
-SELECT a, sum(b), avg(c), count(*) FROM pagg_tab_m GROUP BY a HAVING avg(c) < 22 ORDER BY 1, 2, 3;
- a  | sum  |         avg         | count 
-----+------+---------------------+-------
-  0 | 1500 | 20.0000000000000000 |   100
-  1 | 1600 | 21.0000000000000000 |   100
- 10 | 1500 | 20.0000000000000000 |   100
- 11 | 1600 | 21.0000000000000000 |   100
- 20 | 1500 | 20.0000000000000000 |   100
- 21 | 1600 | 21.0000000000000000 |   100
-(6 rows)
-
--- Full aggregation as GROUP BY clause matches with PARTITION KEY
-EXPLAIN (COSTS OFF)
-SELECT a, sum(b), avg(c), count(*) FROM pagg_tab_m GROUP BY a, (a+b)/2 HAVING sum(b) < 50 ORDER BY 1, 2, 3;
-                                    QUERY PLAN                                    
-----------------------------------------------------------------------------------
- Sort
-   Sort Key: pagg_tab_m.a, (sum(pagg_tab_m.b)), (avg(pagg_tab_m.c))
-   ->  Append
-         ->  HashAggregate
-               Group Key: pagg_tab_m.a, ((pagg_tab_m.a + pagg_tab_m.b) / 2)
-               Filter: (sum(pagg_tab_m.b) < 50)
-               ->  Seq Scan on pagg_tab_m_p1 pagg_tab_m
-         ->  HashAggregate
-               Group Key: pagg_tab_m_1.a, ((pagg_tab_m_1.a + pagg_tab_m_1.b) / 2)
-               Filter: (sum(pagg_tab_m_1.b) < 50)
-               ->  Seq Scan on pagg_tab_m_p2 pagg_tab_m_1
-         ->  HashAggregate
-               Group Key: pagg_tab_m_2.a, ((pagg_tab_m_2.a + pagg_tab_m_2.b) / 2)
-               Filter: (sum(pagg_tab_m_2.b) < 50)
-               ->  Seq Scan on pagg_tab_m_p3 pagg_tab_m_2
-(15 rows)
-
-SELECT a, sum(b), avg(c), count(*) FROM pagg_tab_m GROUP BY a, (a+b)/2 HAVING sum(b) < 50 ORDER BY 1, 2, 3;
- a  | sum |         avg         | count 
-----+-----+---------------------+-------
-  0 |   0 | 20.0000000000000000 |    25
-  1 |  25 | 21.0000000000000000 |    25
- 10 |   0 | 20.0000000000000000 |    25
- 11 |  25 | 21.0000000000000000 |    25
- 20 |   0 | 20.0000000000000000 |    25
- 21 |  25 | 21.0000000000000000 |    25
-(6 rows)
-
--- Full aggregation as PARTITION KEY is part of GROUP BY clause
-EXPLAIN (COSTS OFF)
-SELECT a, c, sum(b), avg(c), count(*) FROM pagg_tab_m GROUP BY (a+b)/2, 2, 1 HAVING sum(b) = 50 AND avg(c) > 25 ORDER BY 1, 2, 3;
-                                            QUERY PLAN                                            
---------------------------------------------------------------------------------------------------
- Sort
-   Sort Key: pagg_tab_m.a, pagg_tab_m.c, (sum(pagg_tab_m.b))
-   ->  Append
-         ->  HashAggregate
-               Group Key: pagg_tab_m.a, pagg_tab_m.c, ((pagg_tab_m.a + pagg_tab_m.b) / 2)
-               Filter: ((sum(pagg_tab_m.b) = 50) AND (avg(pagg_tab_m.c) > '25'::numeric))
-               ->  Seq Scan on pagg_tab_m_p1 pagg_tab_m
-         ->  HashAggregate
-               Group Key: pagg_tab_m_1.a, pagg_tab_m_1.c, ((pagg_tab_m_1.a + pagg_tab_m_1.b) / 2)
-               Filter: ((sum(pagg_tab_m_1.b) = 50) AND (avg(pagg_tab_m_1.c) > '25'::numeric))
-               ->  Seq Scan on pagg_tab_m_p2 pagg_tab_m_1
-         ->  HashAggregate
-               Group Key: pagg_tab_m_2.a, pagg_tab_m_2.c, ((pagg_tab_m_2.a + pagg_tab_m_2.b) / 2)
-               Filter: ((sum(pagg_tab_m_2.b) = 50) AND (avg(pagg_tab_m_2.c) > '25'::numeric))
-               ->  Seq Scan on pagg_tab_m_p3 pagg_tab_m_2
-(15 rows)
-
-SELECT a, c, sum(b), avg(c), count(*) FROM pagg_tab_m GROUP BY (a+b)/2, 2, 1 HAVING sum(b) = 50 AND avg(c) > 25 ORDER BY 1, 2, 3;
- a  | c  | sum |         avg         | count 
-----+----+-----+---------------------+-------
-  0 | 30 |  50 | 30.0000000000000000 |     5
-  0 | 40 |  50 | 40.0000000000000000 |     5
- 10 | 30 |  50 | 30.0000000000000000 |     5
- 10 | 40 |  50 | 40.0000000000000000 |     5
- 20 | 30 |  50 | 30.0000000000000000 |     5
- 20 | 40 |  50 | 40.0000000000000000 |     5
-(6 rows)
-
--- Test with multi-level partitioning scheme
-CREATE TABLE pagg_tab_ml (a int, b int, c text) PARTITION BY RANGE(a);
-CREATE TABLE pagg_tab_ml_p1 PARTITION OF pagg_tab_ml FOR VALUES FROM (0) TO (12);
-CREATE TABLE pagg_tab_ml_p2 PARTITION OF pagg_tab_ml FOR VALUES FROM (12) TO (20) PARTITION BY LIST (c);
-CREATE TABLE pagg_tab_ml_p2_s1 PARTITION OF pagg_tab_ml_p2 FOR VALUES IN ('0000', '0001', '0002');
-CREATE TABLE pagg_tab_ml_p2_s2 PARTITION OF pagg_tab_ml_p2 FOR VALUES IN ('0003');
--- This level of partitioning has different column positions than the parent
-CREATE TABLE pagg_tab_ml_p3(b int, c text, a int) PARTITION BY RANGE (b);
-CREATE TABLE pagg_tab_ml_p3_s1(c text, a int, b int);
-CREATE TABLE pagg_tab_ml_p3_s2 PARTITION OF pagg_tab_ml_p3 FOR VALUES FROM (7) TO (10);
-ALTER TABLE pagg_tab_ml_p3 ATTACH PARTITION pagg_tab_ml_p3_s1 FOR VALUES FROM (0) TO (7);
-ALTER TABLE pagg_tab_ml ATTACH PARTITION pagg_tab_ml_p3 FOR VALUES FROM (20) TO (30);
-INSERT INTO pagg_tab_ml SELECT i % 30, i % 10, to_char(i % 4, 'FM0000') FROM generate_series(0, 29999) i;
-ANALYZE pagg_tab_ml;
--- For Parallel Append
-SET max_parallel_workers_per_gather TO 2;
-SET parallel_setup_cost = 0;
--- Full aggregation at level 1 as GROUP BY clause matches with PARTITION KEY
--- for level 1 only. For subpartitions, GROUP BY clause does not match with
--- PARTITION KEY, but still we do not see a partial aggregation as array_agg()
--- is not partial agg safe.
-EXPLAIN (COSTS OFF)
-SELECT a, sum(b), array_agg(distinct c), count(*) FROM pagg_tab_ml GROUP BY a HAVING avg(b) < 3 ORDER BY 1, 2, 3;
-                                      QUERY PLAN                                      
---------------------------------------------------------------------------------------
- Sort
-   Sort Key: pagg_tab_ml.a, (sum(pagg_tab_ml.b)), (array_agg(DISTINCT pagg_tab_ml.c))
-   ->  Gather
-         Workers Planned: 2
-         ->  Parallel Append
-               ->  GroupAggregate
-                     Group Key: pagg_tab_ml.a
-                     Filter: (avg(pagg_tab_ml.b) < '3'::numeric)
-                     ->  Sort
-                           Sort Key: pagg_tab_ml.a, pagg_tab_ml.c
-                           ->  Seq Scan on pagg_tab_ml_p1 pagg_tab_ml
-               ->  GroupAggregate
-                     Group Key: pagg_tab_ml_5.a
-                     Filter: (avg(pagg_tab_ml_5.b) < '3'::numeric)
-                     ->  Sort
-                           Sort Key: pagg_tab_ml_5.a, pagg_tab_ml_5.c
-                           ->  Append
-                                 ->  Seq Scan on pagg_tab_ml_p3_s1 pagg_tab_ml_5
-                                 ->  Seq Scan on pagg_tab_ml_p3_s2 pagg_tab_ml_6
-               ->  GroupAggregate
-                     Group Key: pagg_tab_ml_2.a
-                     Filter: (avg(pagg_tab_ml_2.b) < '3'::numeric)
-                     ->  Sort
-                           Sort Key: pagg_tab_ml_2.a, pagg_tab_ml_2.c
-                           ->  Append
-                                 ->  Seq Scan on pagg_tab_ml_p2_s1 pagg_tab_ml_2
-                                 ->  Seq Scan on pagg_tab_ml_p2_s2 pagg_tab_ml_3
-(27 rows)
-
-SELECT a, sum(b), array_agg(distinct c), count(*) FROM pagg_tab_ml GROUP BY a HAVING avg(b) < 3 ORDER BY 1, 2, 3;
- a  | sum  |  array_agg  | count 
-----+------+-------------+-------
-  0 |    0 | {0000,0002} |  1000
-  1 | 1000 | {0001,0003} |  1000
-  2 | 2000 | {0000,0002} |  1000
- 10 |    0 | {0000,0002} |  1000
- 11 | 1000 | {0001,0003} |  1000
- 12 | 2000 | {0000,0002} |  1000
- 20 |    0 | {0000,0002} |  1000
- 21 | 1000 | {0001,0003} |  1000
- 22 | 2000 | {0000,0002} |  1000
-(9 rows)
-
--- Without ORDER BY clause, to test Gather at top-most path
-EXPLAIN (COSTS OFF)
-SELECT a, sum(b), array_agg(distinct c), count(*) FROM pagg_tab_ml GROUP BY a HAVING avg(b) < 3;
-                                QUERY PLAN                                 
----------------------------------------------------------------------------
- Gather
-   Workers Planned: 2
-   ->  Parallel Append
-         ->  GroupAggregate
-               Group Key: pagg_tab_ml.a
-               Filter: (avg(pagg_tab_ml.b) < '3'::numeric)
-               ->  Sort
-                     Sort Key: pagg_tab_ml.a, pagg_tab_ml.c
-                     ->  Seq Scan on pagg_tab_ml_p1 pagg_tab_ml
-         ->  GroupAggregate
-               Group Key: pagg_tab_ml_5.a
-               Filter: (avg(pagg_tab_ml_5.b) < '3'::numeric)
-               ->  Sort
-                     Sort Key: pagg_tab_ml_5.a, pagg_tab_ml_5.c
-                     ->  Append
-                           ->  Seq Scan on pagg_tab_ml_p3_s1 pagg_tab_ml_5
-                           ->  Seq Scan on pagg_tab_ml_p3_s2 pagg_tab_ml_6
-         ->  GroupAggregate
-               Group Key: pagg_tab_ml_2.a
-               Filter: (avg(pagg_tab_ml_2.b) < '3'::numeric)
-               ->  Sort
-                     Sort Key: pagg_tab_ml_2.a, pagg_tab_ml_2.c
-                     ->  Append
-                           ->  Seq Scan on pagg_tab_ml_p2_s1 pagg_tab_ml_2
-                           ->  Seq Scan on pagg_tab_ml_p2_s2 pagg_tab_ml_3
-(25 rows)
-
-RESET parallel_setup_cost;
--- Full aggregation at level 1 as GROUP BY clause matches with PARTITION KEY
--- for level 1 only. For subpartitions, GROUP BY clause does not match with
--- PARTITION KEY, thus we will have a partial aggregation for them.
-EXPLAIN (COSTS OFF)
-SELECT a, sum(b), count(*) FROM pagg_tab_ml GROUP BY a HAVING avg(b) < 3 ORDER BY 1, 2, 3;
-                                   QUERY PLAN                                    
----------------------------------------------------------------------------------
- Sort
-   Sort Key: pagg_tab_ml.a, (sum(pagg_tab_ml.b)), (count(*))
-   ->  Append
-         ->  HashAggregate
-               Group Key: pagg_tab_ml.a
-               Filter: (avg(pagg_tab_ml.b) < '3'::numeric)
-               ->  Seq Scan on pagg_tab_ml_p1 pagg_tab_ml
-         ->  Finalize GroupAggregate
-               Group Key: pagg_tab_ml_2.a
-               Filter: (avg(pagg_tab_ml_2.b) < '3'::numeric)
-               ->  Sort
-                     Sort Key: pagg_tab_ml_2.a
-                     ->  Append
-                           ->  Partial HashAggregate
-                                 Group Key: pagg_tab_ml_2.a
-                                 ->  Seq Scan on pagg_tab_ml_p2_s1 pagg_tab_ml_2
-                           ->  Partial HashAggregate
-                                 Group Key: pagg_tab_ml_3.a
-                                 ->  Seq Scan on pagg_tab_ml_p2_s2 pagg_tab_ml_3
-         ->  Finalize GroupAggregate
-               Group Key: pagg_tab_ml_5.a
-               Filter: (avg(pagg_tab_ml_5.b) < '3'::numeric)
-               ->  Sort
-                     Sort Key: pagg_tab_ml_5.a
-                     ->  Append
-                           ->  Partial HashAggregate
-                                 Group Key: pagg_tab_ml_5.a
-                                 ->  Seq Scan on pagg_tab_ml_p3_s1 pagg_tab_ml_5
-                           ->  Partial HashAggregate
-                                 Group Key: pagg_tab_ml_6.a
-                                 ->  Seq Scan on pagg_tab_ml_p3_s2 pagg_tab_ml_6
-(31 rows)
-
-SELECT a, sum(b), count(*) FROM pagg_tab_ml GROUP BY a HAVING avg(b) < 3 ORDER BY 1, 2, 3;
- a  | sum  | count 
-----+------+-------
-  0 |    0 |  1000
-  1 | 1000 |  1000
-  2 | 2000 |  1000
- 10 |    0 |  1000
- 11 | 1000 |  1000
- 12 | 2000 |  1000
- 20 |    0 |  1000
- 21 | 1000 |  1000
- 22 | 2000 |  1000
-(9 rows)
-
--- Partial aggregation at all levels as GROUP BY clause does not match with
--- PARTITION KEY
-EXPLAIN (COSTS OFF)
-SELECT b, sum(a), count(*) FROM pagg_tab_ml GROUP BY b ORDER BY 1, 2, 3;
-                                QUERY PLAN                                 
----------------------------------------------------------------------------
- Sort
-   Sort Key: pagg_tab_ml.b, (sum(pagg_tab_ml.a)), (count(*))
-   ->  Finalize GroupAggregate
-         Group Key: pagg_tab_ml.b
-         ->  Sort
-               Sort Key: pagg_tab_ml.b
-               ->  Append
-                     ->  Partial HashAggregate
-                           Group Key: pagg_tab_ml.b
-                           ->  Seq Scan on pagg_tab_ml_p1 pagg_tab_ml
-                     ->  Partial HashAggregate
-                           Group Key: pagg_tab_ml_1.b
-                           ->  Seq Scan on pagg_tab_ml_p2_s1 pagg_tab_ml_1
-                     ->  Partial HashAggregate
-                           Group Key: pagg_tab_ml_2.b
-                           ->  Seq Scan on pagg_tab_ml_p2_s2 pagg_tab_ml_2
-                     ->  Partial HashAggregate
-                           Group Key: pagg_tab_ml_3.b
-                           ->  Seq Scan on pagg_tab_ml_p3_s1 pagg_tab_ml_3
-                     ->  Partial HashAggregate
-                           Group Key: pagg_tab_ml_4.b
-                           ->  Seq Scan on pagg_tab_ml_p3_s2 pagg_tab_ml_4
-(22 rows)
-
-SELECT b, sum(a), count(*) FROM pagg_tab_ml GROUP BY b HAVING avg(a) < 15 ORDER BY 1, 2, 3;
- b |  sum  | count 
----+-------+-------
- 0 | 30000 |  3000
- 1 | 33000 |  3000
- 2 | 36000 |  3000
- 3 | 39000 |  3000
- 4 | 42000 |  3000
-(5 rows)
-
--- Full aggregation at all levels as GROUP BY clause matches with PARTITION KEY
-EXPLAIN (COSTS OFF)
-SELECT a, sum(b), count(*) FROM pagg_tab_ml GROUP BY a, b, c HAVING avg(b) > 7 ORDER BY 1, 2, 3;
-                                 QUERY PLAN                                 
-----------------------------------------------------------------------------
- Sort
-   Sort Key: pagg_tab_ml.a, (sum(pagg_tab_ml.b)), (count(*))
-   ->  Append
-         ->  HashAggregate
-               Group Key: pagg_tab_ml.a, pagg_tab_ml.b, pagg_tab_ml.c
-               Filter: (avg(pagg_tab_ml.b) > '7'::numeric)
-               ->  Seq Scan on pagg_tab_ml_p1 pagg_tab_ml
-         ->  HashAggregate
-               Group Key: pagg_tab_ml_1.a, pagg_tab_ml_1.b, pagg_tab_ml_1.c
-               Filter: (avg(pagg_tab_ml_1.b) > '7'::numeric)
-               ->  Seq Scan on pagg_tab_ml_p2_s1 pagg_tab_ml_1
-         ->  HashAggregate
-               Group Key: pagg_tab_ml_2.a, pagg_tab_ml_2.b, pagg_tab_ml_2.c
-               Filter: (avg(pagg_tab_ml_2.b) > '7'::numeric)
-               ->  Seq Scan on pagg_tab_ml_p2_s2 pagg_tab_ml_2
-         ->  HashAggregate
-               Group Key: pagg_tab_ml_3.a, pagg_tab_ml_3.b, pagg_tab_ml_3.c
-               Filter: (avg(pagg_tab_ml_3.b) > '7'::numeric)
-               ->  Seq Scan on pagg_tab_ml_p3_s1 pagg_tab_ml_3
-         ->  HashAggregate
-               Group Key: pagg_tab_ml_4.a, pagg_tab_ml_4.b, pagg_tab_ml_4.c
-               Filter: (avg(pagg_tab_ml_4.b) > '7'::numeric)
-               ->  Seq Scan on pagg_tab_ml_p3_s2 pagg_tab_ml_4
-(23 rows)
-
-SELECT a, sum(b), count(*) FROM pagg_tab_ml GROUP BY a, b, c HAVING avg(b) > 7 ORDER BY 1, 2, 3;
- a  | sum  | count 
-----+------+-------
-  8 | 4000 |   500
-  8 | 4000 |   500
-  9 | 4500 |   500
-  9 | 4500 |   500
- 18 | 4000 |   500
- 18 | 4000 |   500
- 19 | 4500 |   500
- 19 | 4500 |   500
- 28 | 4000 |   500
- 28 | 4000 |   500
- 29 | 4500 |   500
- 29 | 4500 |   500
-(12 rows)
-
--- Parallelism within partitionwise aggregates
-SET min_parallel_table_scan_size TO '8kB';
-SET parallel_setup_cost TO 0;
--- Full aggregation at level 1 as GROUP BY clause matches with PARTITION KEY
--- for level 1 only. For subpartitions, GROUP BY clause does not match with
--- PARTITION KEY, thus we will have a partial aggregation for them.
-EXPLAIN (COSTS OFF)
-SELECT a, sum(b), count(*) FROM pagg_tab_ml GROUP BY a HAVING avg(b) < 3 ORDER BY 1, 2, 3;
-                                           QUERY PLAN                                           
-------------------------------------------------------------------------------------------------
- Sort
-   Sort Key: pagg_tab_ml.a, (sum(pagg_tab_ml.b)), (count(*))
-   ->  Append
-         ->  Finalize GroupAggregate
-               Group Key: pagg_tab_ml.a
-               Filter: (avg(pagg_tab_ml.b) < '3'::numeric)
-               ->  Gather Merge
-                     Workers Planned: 2
-                     ->  Sort
-                           Sort Key: pagg_tab_ml.a
-                           ->  Partial HashAggregate
-                                 Group Key: pagg_tab_ml.a
-                                 ->  Parallel Seq Scan on pagg_tab_ml_p1 pagg_tab_ml
-         ->  Finalize GroupAggregate
-               Group Key: pagg_tab_ml_2.a
-               Filter: (avg(pagg_tab_ml_2.b) < '3'::numeric)
-               ->  Gather Merge
-                     Workers Planned: 2
-                     ->  Sort
-                           Sort Key: pagg_tab_ml_2.a
-                           ->  Parallel Append
-                                 ->  Partial HashAggregate
-                                       Group Key: pagg_tab_ml_2.a
-                                       ->  Parallel Seq Scan on pagg_tab_ml_p2_s1 pagg_tab_ml_2
-                                 ->  Partial HashAggregate
-                                       Group Key: pagg_tab_ml_3.a
-                                       ->  Parallel Seq Scan on pagg_tab_ml_p2_s2 pagg_tab_ml_3
-         ->  Finalize GroupAggregate
-               Group Key: pagg_tab_ml_5.a
-               Filter: (avg(pagg_tab_ml_5.b) < '3'::numeric)
-               ->  Gather Merge
-                     Workers Planned: 2
-                     ->  Sort
-                           Sort Key: pagg_tab_ml_5.a
-                           ->  Parallel Append
-                                 ->  Partial HashAggregate
-                                       Group Key: pagg_tab_ml_5.a
-                                       ->  Parallel Seq Scan on pagg_tab_ml_p3_s1 pagg_tab_ml_5
-                                 ->  Partial HashAggregate
-                                       Group Key: pagg_tab_ml_6.a
-                                       ->  Parallel Seq Scan on pagg_tab_ml_p3_s2 pagg_tab_ml_6
-(41 rows)
-
-SELECT a, sum(b), count(*) FROM pagg_tab_ml GROUP BY a HAVING avg(b) < 3 ORDER BY 1, 2, 3;
- a  | sum  | count 
-----+------+-------
-  0 |    0 |  1000
-  1 | 1000 |  1000
-  2 | 2000 |  1000
- 10 |    0 |  1000
- 11 | 1000 |  1000
- 12 | 2000 |  1000
- 20 |    0 |  1000
- 21 | 1000 |  1000
- 22 | 2000 |  1000
-(9 rows)
-
--- Partial aggregation at all levels as GROUP BY clause does not match with
--- PARTITION KEY
-EXPLAIN (COSTS OFF)
-SELECT b, sum(a), count(*) FROM pagg_tab_ml GROUP BY b ORDER BY 1, 2, 3;
-                                        QUERY PLAN                                        
-------------------------------------------------------------------------------------------
- Sort
-   Sort Key: pagg_tab_ml.b, (sum(pagg_tab_ml.a)), (count(*))
-   ->  Finalize GroupAggregate
-         Group Key: pagg_tab_ml.b
-         ->  Gather Merge
-               Workers Planned: 2
-               ->  Sort
-                     Sort Key: pagg_tab_ml.b
-                     ->  Parallel Append
-                           ->  Partial HashAggregate
-                                 Group Key: pagg_tab_ml.b
-                                 ->  Parallel Seq Scan on pagg_tab_ml_p1 pagg_tab_ml
-                           ->  Partial HashAggregate
-                                 Group Key: pagg_tab_ml_3.b
-                                 ->  Parallel Seq Scan on pagg_tab_ml_p3_s1 pagg_tab_ml_3
-                           ->  Partial HashAggregate
-                                 Group Key: pagg_tab_ml_1.b
-                                 ->  Parallel Seq Scan on pagg_tab_ml_p2_s1 pagg_tab_ml_1
-                           ->  Partial HashAggregate
-                                 Group Key: pagg_tab_ml_4.b
-                                 ->  Parallel Seq Scan on pagg_tab_ml_p3_s2 pagg_tab_ml_4
-                           ->  Partial HashAggregate
-                                 Group Key: pagg_tab_ml_2.b
-                                 ->  Parallel Seq Scan on pagg_tab_ml_p2_s2 pagg_tab_ml_2
-(24 rows)
-
-SELECT b, sum(a), count(*) FROM pagg_tab_ml GROUP BY b HAVING avg(a) < 15 ORDER BY 1, 2, 3;
- b |  sum  | count 
----+-------+-------
- 0 | 30000 |  3000
- 1 | 33000 |  3000
- 2 | 36000 |  3000
- 3 | 39000 |  3000
- 4 | 42000 |  3000
-(5 rows)
-
--- Full aggregation at all levels as GROUP BY clause matches with PARTITION KEY
-EXPLAIN (COSTS OFF)
-SELECT a, sum(b), count(*) FROM pagg_tab_ml GROUP BY a, b, c HAVING avg(b) > 7 ORDER BY 1, 2, 3;
-                                    QUERY PLAN                                    
-----------------------------------------------------------------------------------
- Gather Merge
-   Workers Planned: 2
-   ->  Sort
-         Sort Key: pagg_tab_ml.a, (sum(pagg_tab_ml.b)), (count(*))
-         ->  Parallel Append
-               ->  HashAggregate
-                     Group Key: pagg_tab_ml.a, pagg_tab_ml.b, pagg_tab_ml.c
-                     Filter: (avg(pagg_tab_ml.b) > '7'::numeric)
-                     ->  Seq Scan on pagg_tab_ml_p1 pagg_tab_ml
-               ->  HashAggregate
-                     Group Key: pagg_tab_ml_3.a, pagg_tab_ml_3.b, pagg_tab_ml_3.c
-                     Filter: (avg(pagg_tab_ml_3.b) > '7'::numeric)
-                     ->  Seq Scan on pagg_tab_ml_p3_s1 pagg_tab_ml_3
-               ->  HashAggregate
-                     Group Key: pagg_tab_ml_1.a, pagg_tab_ml_1.b, pagg_tab_ml_1.c
-                     Filter: (avg(pagg_tab_ml_1.b) > '7'::numeric)
-                     ->  Seq Scan on pagg_tab_ml_p2_s1 pagg_tab_ml_1
-               ->  HashAggregate
-                     Group Key: pagg_tab_ml_4.a, pagg_tab_ml_4.b, pagg_tab_ml_4.c
-                     Filter: (avg(pagg_tab_ml_4.b) > '7'::numeric)
-                     ->  Seq Scan on pagg_tab_ml_p3_s2 pagg_tab_ml_4
-               ->  HashAggregate
-                     Group Key: pagg_tab_ml_2.a, pagg_tab_ml_2.b, pagg_tab_ml_2.c
-                     Filter: (avg(pagg_tab_ml_2.b) > '7'::numeric)
-                     ->  Seq Scan on pagg_tab_ml_p2_s2 pagg_tab_ml_2
-(25 rows)
-
-SELECT a, sum(b), count(*) FROM pagg_tab_ml GROUP BY a, b, c HAVING avg(b) > 7 ORDER BY 1, 2, 3;
- a  | sum  | count 
-----+------+-------
-  8 | 4000 |   500
-  8 | 4000 |   500
-  9 | 4500 |   500
-  9 | 4500 |   500
- 18 | 4000 |   500
- 18 | 4000 |   500
- 19 | 4500 |   500
- 19 | 4500 |   500
- 28 | 4000 |   500
- 28 | 4000 |   500
- 29 | 4500 |   500
- 29 | 4500 |   500
-(12 rows)
-
--- Parallelism within partitionwise aggregates (single level)
--- Add few parallel setup cost, so that we will see a plan which gathers
--- partially created paths even for full aggregation and sticks a single Gather
--- followed by finalization step.
--- Without this, the cost of doing partial aggregation + Gather + finalization
--- for each partition and then Append over it turns out to be same and this
--- wins as we add it first. This parallel_setup_cost plays a vital role in
--- costing such plans.
-SET parallel_setup_cost TO 10;
-CREATE TABLE pagg_tab_para(x int, y int) PARTITION BY RANGE(x);
-CREATE TABLE pagg_tab_para_p1 PARTITION OF pagg_tab_para FOR VALUES FROM (0) TO (12);
-CREATE TABLE pagg_tab_para_p2 PARTITION OF pagg_tab_para FOR VALUES FROM (12) TO (22);
-CREATE TABLE pagg_tab_para_p3 PARTITION OF pagg_tab_para FOR VALUES FROM (22) TO (30);
-INSERT INTO pagg_tab_para SELECT i % 30, i % 20 FROM generate_series(0, 29999) i;
-ANALYZE pagg_tab_para;
--- When GROUP BY clause matches; full aggregation is performed for each partition.
-EXPLAIN (COSTS OFF)
-SELECT x, sum(y), avg(y), count(*) FROM pagg_tab_para GROUP BY x HAVING avg(y) < 7 ORDER BY 1, 2, 3;
-                                        QUERY PLAN                                         
--------------------------------------------------------------------------------------------
- Sort
-   Sort Key: pagg_tab_para.x, (sum(pagg_tab_para.y)), (avg(pagg_tab_para.y))
-   ->  Finalize GroupAggregate
-         Group Key: pagg_tab_para.x
-         Filter: (avg(pagg_tab_para.y) < '7'::numeric)
-         ->  Gather Merge
-               Workers Planned: 2
-               ->  Sort
-                     Sort Key: pagg_tab_para.x
-                     ->  Parallel Append
-                           ->  Partial HashAggregate
-                                 Group Key: pagg_tab_para.x
-                                 ->  Parallel Seq Scan on pagg_tab_para_p1 pagg_tab_para
-                           ->  Partial HashAggregate
-                                 Group Key: pagg_tab_para_1.x
-                                 ->  Parallel Seq Scan on pagg_tab_para_p2 pagg_tab_para_1
-                           ->  Partial HashAggregate
-                                 Group Key: pagg_tab_para_2.x
-                                 ->  Parallel Seq Scan on pagg_tab_para_p3 pagg_tab_para_2
-(19 rows)
-
-SELECT x, sum(y), avg(y), count(*) FROM pagg_tab_para GROUP BY x HAVING avg(y) < 7 ORDER BY 1, 2, 3;
- x  | sum  |        avg         | count 
-----+------+--------------------+-------
-  0 | 5000 | 5.0000000000000000 |  1000
-  1 | 6000 | 6.0000000000000000 |  1000
- 10 | 5000 | 5.0000000000000000 |  1000
- 11 | 6000 | 6.0000000000000000 |  1000
- 20 | 5000 | 5.0000000000000000 |  1000
- 21 | 6000 | 6.0000000000000000 |  1000
-(6 rows)
-
--- When GROUP BY clause does not match; partial aggregation is performed for each partition.
-EXPLAIN (COSTS OFF)
-SELECT y, sum(x), avg(x), count(*) FROM pagg_tab_para GROUP BY y HAVING avg(x) < 12 ORDER BY 1, 2, 3;
-                                        QUERY PLAN                                         
--------------------------------------------------------------------------------------------
- Sort
-   Sort Key: pagg_tab_para.y, (sum(pagg_tab_para.x)), (avg(pagg_tab_para.x))
-   ->  Finalize GroupAggregate
-         Group Key: pagg_tab_para.y
-         Filter: (avg(pagg_tab_para.x) < '12'::numeric)
-         ->  Gather Merge
-               Workers Planned: 2
-               ->  Sort
-                     Sort Key: pagg_tab_para.y
-                     ->  Parallel Append
-                           ->  Partial HashAggregate
-                                 Group Key: pagg_tab_para.y
-                                 ->  Parallel Seq Scan on pagg_tab_para_p1 pagg_tab_para
-                           ->  Partial HashAggregate
-                                 Group Key: pagg_tab_para_1.y
-                                 ->  Parallel Seq Scan on pagg_tab_para_p2 pagg_tab_para_1
-                           ->  Partial HashAggregate
-                                 Group Key: pagg_tab_para_2.y
-                                 ->  Parallel Seq Scan on pagg_tab_para_p3 pagg_tab_para_2
-(19 rows)
-
-SELECT y, sum(x), avg(x), count(*) FROM pagg_tab_para GROUP BY y HAVING avg(x) < 12 ORDER BY 1, 2, 3;
- y  |  sum  |         avg         | count 
-----+-------+---------------------+-------
-  0 | 15000 | 10.0000000000000000 |  1500
-  1 | 16500 | 11.0000000000000000 |  1500
- 10 | 15000 | 10.0000000000000000 |  1500
- 11 | 16500 | 11.0000000000000000 |  1500
-(4 rows)
-
--- Test when parent can produce parallel paths but not any (or some) of its children
--- (Use one more aggregate to tilt the cost estimates for the plan we want)
-ALTER TABLE pagg_tab_para_p1 SET (parallel_workers = 0);
-ALTER TABLE pagg_tab_para_p3 SET (parallel_workers = 0);
-ANALYZE pagg_tab_para;
-EXPLAIN (COSTS OFF)
-SELECT x, sum(y), avg(y), sum(x+y), count(*) FROM pagg_tab_para GROUP BY x HAVING avg(y) < 7 ORDER BY 1, 2, 3;
-                                        QUERY PLAN                                         
--------------------------------------------------------------------------------------------
- Sort
-   Sort Key: pagg_tab_para.x, (sum(pagg_tab_para.y)), (avg(pagg_tab_para.y))
-   ->  Finalize GroupAggregate
-         Group Key: pagg_tab_para.x
-         Filter: (avg(pagg_tab_para.y) < '7'::numeric)
-         ->  Gather Merge
-               Workers Planned: 2
-               ->  Sort
-                     Sort Key: pagg_tab_para.x
-                     ->  Partial HashAggregate
-                           Group Key: pagg_tab_para.x
-                           ->  Parallel Append
-                                 ->  Seq Scan on pagg_tab_para_p1 pagg_tab_para_1
-                                 ->  Seq Scan on pagg_tab_para_p3 pagg_tab_para_3
-                                 ->  Parallel Seq Scan on pagg_tab_para_p2 pagg_tab_para_2
-(15 rows)
-
-SELECT x, sum(y), avg(y), sum(x+y), count(*) FROM pagg_tab_para GROUP BY x HAVING avg(y) < 7 ORDER BY 1, 2, 3;
- x  | sum  |        avg         |  sum  | count 
-----+------+--------------------+-------+-------
-  0 | 5000 | 5.0000000000000000 |  5000 |  1000
-  1 | 6000 | 6.0000000000000000 |  7000 |  1000
- 10 | 5000 | 5.0000000000000000 | 15000 |  1000
- 11 | 6000 | 6.0000000000000000 | 17000 |  1000
- 20 | 5000 | 5.0000000000000000 | 25000 |  1000
- 21 | 6000 | 6.0000000000000000 | 27000 |  1000
-(6 rows)
-
-ALTER TABLE pagg_tab_para_p2 SET (parallel_workers = 0);
-ANALYZE pagg_tab_para;
-EXPLAIN (COSTS OFF)
-SELECT x, sum(y), avg(y), sum(x+y), count(*) FROM pagg_tab_para GROUP BY x HAVING avg(y) < 7 ORDER BY 1, 2, 3;
-                                    QUERY PLAN                                    
-----------------------------------------------------------------------------------
- Sort
-   Sort Key: pagg_tab_para.x, (sum(pagg_tab_para.y)), (avg(pagg_tab_para.y))
-   ->  Finalize GroupAggregate
-         Group Key: pagg_tab_para.x
-         Filter: (avg(pagg_tab_para.y) < '7'::numeric)
-         ->  Gather Merge
-               Workers Planned: 2
-               ->  Sort
-                     Sort Key: pagg_tab_para.x
-                     ->  Partial HashAggregate
-                           Group Key: pagg_tab_para.x
-                           ->  Parallel Append
-                                 ->  Seq Scan on pagg_tab_para_p1 pagg_tab_para_1
-                                 ->  Seq Scan on pagg_tab_para_p2 pagg_tab_para_2
-                                 ->  Seq Scan on pagg_tab_para_p3 pagg_tab_para_3
-(15 rows)
-
-SELECT x, sum(y), avg(y), sum(x+y), count(*) FROM pagg_tab_para GROUP BY x HAVING avg(y) < 7 ORDER BY 1, 2, 3;
- x  | sum  |        avg         |  sum  | count 
-----+------+--------------------+-------+-------
-  0 | 5000 | 5.0000000000000000 |  5000 |  1000
-  1 | 6000 | 6.0000000000000000 |  7000 |  1000
- 10 | 5000 | 5.0000000000000000 | 15000 |  1000
- 11 | 6000 | 6.0000000000000000 | 17000 |  1000
- 20 | 5000 | 5.0000000000000000 | 25000 |  1000
- 21 | 6000 | 6.0000000000000000 | 27000 |  1000
-(6 rows)
-
--- Reset parallelism parameters to get partitionwise aggregation plan.
-RESET min_parallel_table_scan_size;
-RESET parallel_setup_cost;
-EXPLAIN (COSTS OFF)
-SELECT x, sum(y), avg(y), count(*) FROM pagg_tab_para GROUP BY x HAVING avg(y) < 7 ORDER BY 1, 2, 3;
-                                 QUERY PLAN                                  
------------------------------------------------------------------------------
- Sort
-   Sort Key: pagg_tab_para.x, (sum(pagg_tab_para.y)), (avg(pagg_tab_para.y))
-   ->  Append
-         ->  HashAggregate
-               Group Key: pagg_tab_para.x
-               Filter: (avg(pagg_tab_para.y) < '7'::numeric)
-               ->  Seq Scan on pagg_tab_para_p1 pagg_tab_para
-         ->  HashAggregate
-               Group Key: pagg_tab_para_1.x
-               Filter: (avg(pagg_tab_para_1.y) < '7'::numeric)
-               ->  Seq Scan on pagg_tab_para_p2 pagg_tab_para_1
-         ->  HashAggregate
-               Group Key: pagg_tab_para_2.x
-               Filter: (avg(pagg_tab_para_2.y) < '7'::numeric)
-               ->  Seq Scan on pagg_tab_para_p3 pagg_tab_para_2
-(15 rows)
-
-SELECT x, sum(y), avg(y), count(*) FROM pagg_tab_para GROUP BY x HAVING avg(y) < 7 ORDER BY 1, 2, 3;
- x  | sum  |        avg         | count 
-----+------+--------------------+-------
-  0 | 5000 | 5.0000000000000000 |  1000
-  1 | 6000 | 6.0000000000000000 |  1000
- 10 | 5000 | 5.0000000000000000 |  1000
- 11 | 6000 | 6.0000000000000000 |  1000
- 20 | 5000 | 5.0000000000000000 |  1000
- 21 | 6000 | 6.0000000000000000 |  1000
-(6 rows)
-
+psql: error: connection to server on socket "/tmp/f_SDOOqtof/.s.PGSQL.16412" failed: No such file or directory
+	Is the server running locally and accepting connections on that socket?
diff -U3 /tmp/cirrus-ci-build/src/test/regress/expected/partition_info.out /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/partition_info.out
--- /tmp/cirrus-ci-build/src/test/regress/expected/partition_info.out	2024-09-20 04:07:19.050804285 +0000
+++ /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/partition_info.out	2024-09-20 04:17:09.145564736 +0000
@@ -1,351 +1,2 @@
---
--- Tests for functions providing information about partitions
---
-SELECT * FROM pg_partition_tree(NULL);
- relid | parentrelid | isleaf | level 
--------+-------------+--------+-------
-(0 rows)
-
-SELECT * FROM pg_partition_tree(0);
- relid | parentrelid | isleaf | level 
--------+-------------+--------+-------
-(0 rows)
-
-SELECT * FROM pg_partition_ancestors(NULL);
- relid 
--------
-(0 rows)
-
-SELECT * FROM pg_partition_ancestors(0);
- relid 
--------
-(0 rows)
-
-SELECT pg_partition_root(NULL);
- pg_partition_root 
--------------------
- 
-(1 row)
-
-SELECT pg_partition_root(0);
- pg_partition_root 
--------------------
- 
-(1 row)
-
--- Test table partition trees
-CREATE TABLE ptif_test (a int, b int) PARTITION BY range (a);
-CREATE TABLE ptif_test0 PARTITION OF ptif_test
-  FOR VALUES FROM (minvalue) TO (0) PARTITION BY list (b);
-CREATE TABLE ptif_test01 PARTITION OF ptif_test0 FOR VALUES IN (1);
-CREATE TABLE ptif_test1 PARTITION OF ptif_test
-  FOR VALUES FROM (0) TO (100) PARTITION BY list (b);
-CREATE TABLE ptif_test11 PARTITION OF ptif_test1 FOR VALUES IN (1);
-CREATE TABLE ptif_test2 PARTITION OF ptif_test
-  FOR VALUES FROM (100) TO (200);
--- This partitioned table should remain with no partitions.
-CREATE TABLE ptif_test3 PARTITION OF ptif_test
-  FOR VALUES FROM (200) TO (maxvalue) PARTITION BY list (b);
--- Test pg_partition_root for tables
-SELECT pg_partition_root('ptif_test');
- pg_partition_root 
--------------------
- ptif_test
-(1 row)
-
-SELECT pg_partition_root('ptif_test0');
- pg_partition_root 
--------------------
- ptif_test
-(1 row)
-
-SELECT pg_partition_root('ptif_test01');
- pg_partition_root 
--------------------
- ptif_test
-(1 row)
-
-SELECT pg_partition_root('ptif_test3');
- pg_partition_root 
--------------------
- ptif_test
-(1 row)
-
--- Test index partition tree
-CREATE INDEX ptif_test_index ON ONLY ptif_test (a);
-CREATE INDEX ptif_test0_index ON ONLY ptif_test0 (a);
-ALTER INDEX ptif_test_index ATTACH PARTITION ptif_test0_index;
-CREATE INDEX ptif_test01_index ON ptif_test01 (a);
-ALTER INDEX ptif_test0_index ATTACH PARTITION ptif_test01_index;
-CREATE INDEX ptif_test1_index ON ONLY ptif_test1 (a);
-ALTER INDEX ptif_test_index ATTACH PARTITION ptif_test1_index;
-CREATE INDEX ptif_test11_index ON ptif_test11 (a);
-ALTER INDEX ptif_test1_index ATTACH PARTITION ptif_test11_index;
-CREATE INDEX ptif_test2_index ON ptif_test2 (a);
-ALTER INDEX ptif_test_index ATTACH PARTITION ptif_test2_index;
-CREATE INDEX ptif_test3_index ON ptif_test3 (a);
-ALTER INDEX ptif_test_index ATTACH PARTITION ptif_test3_index;
--- Test pg_partition_root for indexes
-SELECT pg_partition_root('ptif_test_index');
- pg_partition_root 
--------------------
- ptif_test_index
-(1 row)
-
-SELECT pg_partition_root('ptif_test0_index');
- pg_partition_root 
--------------------
- ptif_test_index
-(1 row)
-
-SELECT pg_partition_root('ptif_test01_index');
- pg_partition_root 
--------------------
- ptif_test_index
-(1 row)
-
-SELECT pg_partition_root('ptif_test3_index');
- pg_partition_root 
--------------------
- ptif_test_index
-(1 row)
-
--- List all tables members of the tree
-SELECT relid, parentrelid, level, isleaf
-  FROM pg_partition_tree('ptif_test');
-    relid    | parentrelid | level | isleaf 
--------------+-------------+-------+--------
- ptif_test   |             |     0 | f
- ptif_test0  | ptif_test   |     1 | f
- ptif_test1  | ptif_test   |     1 | f
- ptif_test2  | ptif_test   |     1 | t
- ptif_test3  | ptif_test   |     1 | f
- ptif_test01 | ptif_test0  |     2 | t
- ptif_test11 | ptif_test1  |     2 | t
-(7 rows)
-
--- List tables from an intermediate level
-SELECT relid, parentrelid, level, isleaf
-  FROM pg_partition_tree('ptif_test0') p
-  JOIN pg_class c ON (p.relid = c.oid);
-    relid    | parentrelid | level | isleaf 
--------------+-------------+-------+--------
- ptif_test0  | ptif_test   |     0 | f
- ptif_test01 | ptif_test0  |     1 | t
-(2 rows)
-
--- List from leaf table
-SELECT relid, parentrelid, level, isleaf
-  FROM pg_partition_tree('ptif_test01') p
-  JOIN pg_class c ON (p.relid = c.oid);
-    relid    | parentrelid | level | isleaf 
--------------+-------------+-------+--------
- ptif_test01 | ptif_test0  |     0 | t
-(1 row)
-
--- List from partitioned table with no partitions
-SELECT relid, parentrelid, level, isleaf
-  FROM pg_partition_tree('ptif_test3') p
-  JOIN pg_class c ON (p.relid = c.oid);
-   relid    | parentrelid | level | isleaf 
-------------+-------------+-------+--------
- ptif_test3 | ptif_test   |     0 | f
-(1 row)
-
--- List all ancestors of root and leaf tables
-SELECT * FROM pg_partition_ancestors('ptif_test01');
-    relid    
--------------
- ptif_test01
- ptif_test0
- ptif_test
-(3 rows)
-
-SELECT * FROM pg_partition_ancestors('ptif_test');
-   relid   
------------
- ptif_test
-(1 row)
-
--- List all members using pg_partition_root with leaf table reference
-SELECT relid, parentrelid, level, isleaf
-  FROM pg_partition_tree(pg_partition_root('ptif_test01')) p
-  JOIN pg_class c ON (p.relid = c.oid);
-    relid    | parentrelid | level | isleaf 
--------------+-------------+-------+--------
- ptif_test   |             |     0 | f
- ptif_test0  | ptif_test   |     1 | f
- ptif_test1  | ptif_test   |     1 | f
- ptif_test2  | ptif_test   |     1 | t
- ptif_test3  | ptif_test   |     1 | f
- ptif_test01 | ptif_test0  |     2 | t
- ptif_test11 | ptif_test1  |     2 | t
-(7 rows)
-
--- List all indexes members of the tree
-SELECT relid, parentrelid, level, isleaf
-  FROM pg_partition_tree('ptif_test_index');
-       relid       |   parentrelid    | level | isleaf 
--------------------+------------------+-------+--------
- ptif_test_index   |                  |     0 | f
- ptif_test0_index  | ptif_test_index  |     1 | f
- ptif_test1_index  | ptif_test_index  |     1 | f
- ptif_test2_index  | ptif_test_index  |     1 | t
- ptif_test3_index  | ptif_test_index  |     1 | f
- ptif_test01_index | ptif_test0_index |     2 | t
- ptif_test11_index | ptif_test1_index |     2 | t
-(7 rows)
-
--- List indexes from an intermediate level
-SELECT relid, parentrelid, level, isleaf
-  FROM pg_partition_tree('ptif_test0_index') p
-  JOIN pg_class c ON (p.relid = c.oid);
-       relid       |   parentrelid    | level | isleaf 
--------------------+------------------+-------+--------
- ptif_test0_index  | ptif_test_index  |     0 | f
- ptif_test01_index | ptif_test0_index |     1 | t
-(2 rows)
-
--- List from leaf index
-SELECT relid, parentrelid, level, isleaf
-  FROM pg_partition_tree('ptif_test01_index') p
-  JOIN pg_class c ON (p.relid = c.oid);
-       relid       |   parentrelid    | level | isleaf 
--------------------+------------------+-------+--------
- ptif_test01_index | ptif_test0_index |     0 | t
-(1 row)
-
--- List from partitioned index with no partitions
-SELECT relid, parentrelid, level, isleaf
-  FROM pg_partition_tree('ptif_test3_index') p
-  JOIN pg_class c ON (p.relid = c.oid);
-      relid       |   parentrelid   | level | isleaf 
-------------------+-----------------+-------+--------
- ptif_test3_index | ptif_test_index |     0 | f
-(1 row)
-
--- List all members using pg_partition_root with leaf index reference
-SELECT relid, parentrelid, level, isleaf
-  FROM pg_partition_tree(pg_partition_root('ptif_test01_index')) p
-  JOIN pg_class c ON (p.relid = c.oid);
-       relid       |   parentrelid    | level | isleaf 
--------------------+------------------+-------+--------
- ptif_test_index   |                  |     0 | f
- ptif_test0_index  | ptif_test_index  |     1 | f
- ptif_test1_index  | ptif_test_index  |     1 | f
- ptif_test2_index  | ptif_test_index  |     1 | t
- ptif_test3_index  | ptif_test_index  |     1 | f
- ptif_test01_index | ptif_test0_index |     2 | t
- ptif_test11_index | ptif_test1_index |     2 | t
-(7 rows)
-
--- List all ancestors of root and leaf indexes
-SELECT * FROM pg_partition_ancestors('ptif_test01_index');
-       relid       
--------------------
- ptif_test01_index
- ptif_test0_index
- ptif_test_index
-(3 rows)
-
-SELECT * FROM pg_partition_ancestors('ptif_test_index');
-      relid      
------------------
- ptif_test_index
-(1 row)
-
-DROP TABLE ptif_test;
--- Table that is not part of any partition tree is not listed.
-CREATE TABLE ptif_normal_table(a int);
-SELECT relid, parentrelid, level, isleaf
-  FROM pg_partition_tree('ptif_normal_table');
- relid | parentrelid | level | isleaf 
--------+-------------+-------+--------
-(0 rows)
-
-SELECT * FROM pg_partition_ancestors('ptif_normal_table');
- relid 
--------
-(0 rows)
-
-SELECT pg_partition_root('ptif_normal_table');
- pg_partition_root 
--------------------
- 
-(1 row)
-
-DROP TABLE ptif_normal_table;
--- Various partitioning-related functions return empty/NULL if passed relations
--- of types that cannot be part of a partition tree; for example, views,
--- materialized views, legacy inheritance children or parents, etc.
-CREATE VIEW ptif_test_view AS SELECT 1;
-CREATE MATERIALIZED VIEW ptif_test_matview AS SELECT 1;
-CREATE TABLE ptif_li_parent ();
-CREATE TABLE ptif_li_child () INHERITS (ptif_li_parent);
-SELECT * FROM pg_partition_tree('ptif_test_view');
- relid | parentrelid | isleaf | level 
--------+-------------+--------+-------
-(0 rows)
-
-SELECT * FROM pg_partition_tree('ptif_test_matview');
- relid | parentrelid | isleaf | level 
--------+-------------+--------+-------
-(0 rows)
-
-SELECT * FROM pg_partition_tree('ptif_li_parent');
- relid | parentrelid | isleaf | level 
--------+-------------+--------+-------
-(0 rows)
-
-SELECT * FROM pg_partition_tree('ptif_li_child');
- relid | parentrelid | isleaf | level 
--------+-------------+--------+-------
-(0 rows)
-
-SELECT * FROM pg_partition_ancestors('ptif_test_view');
- relid 
--------
-(0 rows)
-
-SELECT * FROM pg_partition_ancestors('ptif_test_matview');
- relid 
--------
-(0 rows)
-
-SELECT * FROM pg_partition_ancestors('ptif_li_parent');
- relid 
--------
-(0 rows)
-
-SELECT * FROM pg_partition_ancestors('ptif_li_child');
- relid 
--------
-(0 rows)
-
-SELECT pg_partition_root('ptif_test_view');
- pg_partition_root 
--------------------
- 
-(1 row)
-
-SELECT pg_partition_root('ptif_test_matview');
- pg_partition_root 
--------------------
- 
-(1 row)
-
-SELECT pg_partition_root('ptif_li_parent');
- pg_partition_root 
--------------------
- 
-(1 row)
-
-SELECT pg_partition_root('ptif_li_child');
- pg_partition_root 
--------------------
- 
-(1 row)
-
-DROP VIEW ptif_test_view;
-DROP MATERIALIZED VIEW ptif_test_matview;
-DROP TABLE ptif_li_parent, ptif_li_child;
+psql: error: connection to server on socket "/tmp/f_SDOOqtof/.s.PGSQL.16412" failed: No such file or directory
+	Is the server running locally and accepting connections on that socket?
diff -U3 /tmp/cirrus-ci-build/src/test/regress/expected/tuplesort.out /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/tuplesort.out
--- /tmp/cirrus-ci-build/src/test/regress/expected/tuplesort.out	2024-09-20 04:07:19.090887213 +0000
+++ /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/tuplesort.out	2024-09-20 04:17:09.137564744 +0000
@@ -1,705 +1,2 @@
--- only use parallelism when explicitly intending to do so
-SET max_parallel_maintenance_workers = 0;
-SET max_parallel_workers = 0;
--- A table with contents that, when sorted, triggers abbreviated
--- key aborts. One easy way to achieve that is to use uuids that all
--- have the same prefix, as abbreviated keys for uuids just use the
--- first sizeof(Datum) bytes.
-CREATE TEMP TABLE abbrev_abort_uuids (
-    id serial not null,
-    abort_increasing uuid,
-    abort_decreasing uuid,
-    noabort_increasing uuid,
-    noabort_decreasing uuid);
-INSERT INTO abbrev_abort_uuids (abort_increasing, abort_decreasing, noabort_increasing, noabort_decreasing)
-    SELECT
-        ('00000000-0000-0000-0000-'||to_char(g.i, '000000000000FM'))::uuid abort_increasing,
-        ('00000000-0000-0000-0000-'||to_char(20000 - g.i, '000000000000FM'))::uuid abort_decreasing,
-        (to_char(g.i % 10009, '00000000FM')||'-0000-0000-0000-'||to_char(g.i, '000000000000FM'))::uuid noabort_increasing,
-        (to_char(((20000 - g.i) % 10009), '00000000FM')||'-0000-0000-0000-'||to_char(20000 - g.i, '000000000000FM'))::uuid noabort_decreasing
-    FROM generate_series(0, 20000, 1) g(i);
--- and a few NULLs
-INSERT INTO abbrev_abort_uuids(id) VALUES(0);
-INSERT INTO abbrev_abort_uuids DEFAULT VALUES;
-INSERT INTO abbrev_abort_uuids DEFAULT VALUES;
--- add just a few duplicates
-INSERT INTO abbrev_abort_uuids (abort_increasing, abort_decreasing, noabort_increasing, noabort_decreasing)
-    SELECT abort_increasing, abort_decreasing, noabort_increasing, noabort_decreasing
-    FROM abbrev_abort_uuids
-    WHERE (id < 10 OR id > 19990) AND id % 3 = 0 AND abort_increasing is not null;
-----
--- Check sort node uses of tuplesort wrt. abbreviated keys
-----
--- plain sort triggering abbreviated abort
-SELECT abort_increasing, abort_decreasing FROM abbrev_abort_uuids ORDER BY abort_increasing OFFSET 20000 - 4;
-           abort_increasing           |           abort_decreasing           
---------------------------------------+--------------------------------------
- 00000000-0000-0000-0000-000000019992 | 00000000-0000-0000-0000-000000000008
- 00000000-0000-0000-0000-000000019993 | 00000000-0000-0000-0000-000000000007
- 00000000-0000-0000-0000-000000019994 | 00000000-0000-0000-0000-000000000006
- 00000000-0000-0000-0000-000000019994 | 00000000-0000-0000-0000-000000000006
- 00000000-0000-0000-0000-000000019995 | 00000000-0000-0000-0000-000000000005
- 00000000-0000-0000-0000-000000019996 | 00000000-0000-0000-0000-000000000004
- 00000000-0000-0000-0000-000000019997 | 00000000-0000-0000-0000-000000000003
- 00000000-0000-0000-0000-000000019997 | 00000000-0000-0000-0000-000000000003
- 00000000-0000-0000-0000-000000019998 | 00000000-0000-0000-0000-000000000002
- 00000000-0000-0000-0000-000000019999 | 00000000-0000-0000-0000-000000000001
- 00000000-0000-0000-0000-000000020000 | 00000000-0000-0000-0000-000000000000
- 00000000-0000-0000-0000-000000020000 | 00000000-0000-0000-0000-000000000000
-                                      | 
-                                      | 
-                                      | 
-(15 rows)
-
-SELECT abort_increasing, abort_decreasing FROM abbrev_abort_uuids ORDER BY abort_decreasing NULLS FIRST OFFSET 20000 - 4;
-           abort_increasing           |           abort_decreasing           
---------------------------------------+--------------------------------------
- 00000000-0000-0000-0000-000000000011 | 00000000-0000-0000-0000-000000019989
- 00000000-0000-0000-0000-000000000010 | 00000000-0000-0000-0000-000000019990
- 00000000-0000-0000-0000-000000000009 | 00000000-0000-0000-0000-000000019991
- 00000000-0000-0000-0000-000000000008 | 00000000-0000-0000-0000-000000019992
- 00000000-0000-0000-0000-000000000008 | 00000000-0000-0000-0000-000000019992
- 00000000-0000-0000-0000-000000000007 | 00000000-0000-0000-0000-000000019993
- 00000000-0000-0000-0000-000000000006 | 00000000-0000-0000-0000-000000019994
- 00000000-0000-0000-0000-000000000005 | 00000000-0000-0000-0000-000000019995
- 00000000-0000-0000-0000-000000000005 | 00000000-0000-0000-0000-000000019995
- 00000000-0000-0000-0000-000000000004 | 00000000-0000-0000-0000-000000019996
- 00000000-0000-0000-0000-000000000003 | 00000000-0000-0000-0000-000000019997
- 00000000-0000-0000-0000-000000000002 | 00000000-0000-0000-0000-000000019998
- 00000000-0000-0000-0000-000000000002 | 00000000-0000-0000-0000-000000019998
- 00000000-0000-0000-0000-000000000001 | 00000000-0000-0000-0000-000000019999
- 00000000-0000-0000-0000-000000000000 | 00000000-0000-0000-0000-000000020000
-(15 rows)
-
--- plain sort not triggering abbreviated abort
-SELECT noabort_increasing, noabort_decreasing FROM abbrev_abort_uuids ORDER BY noabort_increasing OFFSET 20000 - 4;
-          noabort_increasing          |          noabort_decreasing          
---------------------------------------+--------------------------------------
- 00009997-0000-0000-0000-000000009997 | 00010003-0000-0000-0000-000000010003
- 00009998-0000-0000-0000-000000009998 | 00010002-0000-0000-0000-000000010002
- 00009999-0000-0000-0000-000000009999 | 00010001-0000-0000-0000-000000010001
- 00010000-0000-0000-0000-000000010000 | 00010000-0000-0000-0000-000000010000
- 00010001-0000-0000-0000-000000010001 | 00009999-0000-0000-0000-000000009999
- 00010002-0000-0000-0000-000000010002 | 00009998-0000-0000-0000-000000009998
- 00010003-0000-0000-0000-000000010003 | 00009997-0000-0000-0000-000000009997
- 00010004-0000-0000-0000-000000010004 | 00009996-0000-0000-0000-000000009996
- 00010005-0000-0000-0000-000000010005 | 00009995-0000-0000-0000-000000009995
- 00010006-0000-0000-0000-000000010006 | 00009994-0000-0000-0000-000000009994
- 00010007-0000-0000-0000-000000010007 | 00009993-0000-0000-0000-000000009993
- 00010008-0000-0000-0000-000000010008 | 00009992-0000-0000-0000-000000009992
-                                      | 
-                                      | 
-                                      | 
-(15 rows)
-
-SELECT noabort_increasing, noabort_decreasing FROM abbrev_abort_uuids ORDER BY noabort_decreasing NULLS FIRST OFFSET 20000 - 4;
-          noabort_increasing          |          noabort_decreasing          
---------------------------------------+--------------------------------------
- 00010006-0000-0000-0000-000000010006 | 00009994-0000-0000-0000-000000009994
- 00010005-0000-0000-0000-000000010005 | 00009995-0000-0000-0000-000000009995
- 00010004-0000-0000-0000-000000010004 | 00009996-0000-0000-0000-000000009996
- 00010003-0000-0000-0000-000000010003 | 00009997-0000-0000-0000-000000009997
- 00010002-0000-0000-0000-000000010002 | 00009998-0000-0000-0000-000000009998
- 00010001-0000-0000-0000-000000010001 | 00009999-0000-0000-0000-000000009999
- 00010000-0000-0000-0000-000000010000 | 00010000-0000-0000-0000-000000010000
- 00009999-0000-0000-0000-000000009999 | 00010001-0000-0000-0000-000000010001
- 00009998-0000-0000-0000-000000009998 | 00010002-0000-0000-0000-000000010002
- 00009997-0000-0000-0000-000000009997 | 00010003-0000-0000-0000-000000010003
- 00009996-0000-0000-0000-000000009996 | 00010004-0000-0000-0000-000000010004
- 00009995-0000-0000-0000-000000009995 | 00010005-0000-0000-0000-000000010005
- 00009994-0000-0000-0000-000000009994 | 00010006-0000-0000-0000-000000010006
- 00009993-0000-0000-0000-000000009993 | 00010007-0000-0000-0000-000000010007
- 00009992-0000-0000-0000-000000009992 | 00010008-0000-0000-0000-000000010008
-(15 rows)
-
--- bounded sort (disables abbreviated keys)
-SELECT abort_increasing, noabort_increasing FROM abbrev_abort_uuids ORDER BY abort_increasing LIMIT 5;
-           abort_increasing           |          noabort_increasing          
---------------------------------------+--------------------------------------
- 00000000-0000-0000-0000-000000000000 | 00000000-0000-0000-0000-000000000000
- 00000000-0000-0000-0000-000000000001 | 00000001-0000-0000-0000-000000000001
- 00000000-0000-0000-0000-000000000002 | 00000002-0000-0000-0000-000000000002
- 00000000-0000-0000-0000-000000000002 | 00000002-0000-0000-0000-000000000002
- 00000000-0000-0000-0000-000000000003 | 00000003-0000-0000-0000-000000000003
-(5 rows)
-
-SELECT abort_increasing, noabort_increasing FROM abbrev_abort_uuids ORDER BY noabort_increasing NULLS FIRST LIMIT 5;
-           abort_increasing           |          noabort_increasing          
---------------------------------------+--------------------------------------
-                                      | 
-                                      | 
-                                      | 
- 00000000-0000-0000-0000-000000000000 | 00000000-0000-0000-0000-000000000000
- 00000000-0000-0000-0000-000000010009 | 00000000-0000-0000-0000-000000010009
-(5 rows)
-
-----
--- Check index creation uses of tuplesort wrt. abbreviated keys
-----
--- index creation using abbreviated keys successfully
-CREATE INDEX abbrev_abort_uuids__noabort_increasing_idx ON abbrev_abort_uuids (noabort_increasing);
-CREATE INDEX abbrev_abort_uuids__noabort_decreasing_idx ON abbrev_abort_uuids (noabort_decreasing);
--- verify
-EXPLAIN (COSTS OFF)
-SELECT id, noabort_increasing, noabort_decreasing FROM abbrev_abort_uuids ORDER BY noabort_increasing LIMIT 5;
-                                       QUERY PLAN                                        
------------------------------------------------------------------------------------------
- Limit
-   ->  Index Scan using abbrev_abort_uuids__noabort_increasing_idx on abbrev_abort_uuids
-(2 rows)
-
-SELECT id, noabort_increasing, noabort_decreasing FROM abbrev_abort_uuids ORDER BY noabort_increasing LIMIT 5;
-  id   |          noabort_increasing          |          noabort_decreasing          
--------+--------------------------------------+--------------------------------------
-     1 | 00000000-0000-0000-0000-000000000000 | 00009991-0000-0000-0000-000000020000
- 10010 | 00000000-0000-0000-0000-000000010009 | 00009991-0000-0000-0000-000000009991
-     2 | 00000001-0000-0000-0000-000000000001 | 00009990-0000-0000-0000-000000019999
- 10011 | 00000001-0000-0000-0000-000000010010 | 00009990-0000-0000-0000-000000009990
-     3 | 00000002-0000-0000-0000-000000000002 | 00009989-0000-0000-0000-000000019998
-(5 rows)
-
-EXPLAIN (COSTS OFF)
-SELECT id, noabort_increasing, noabort_decreasing FROM abbrev_abort_uuids ORDER BY noabort_decreasing LIMIT 5;
-                                       QUERY PLAN                                        
------------------------------------------------------------------------------------------
- Limit
-   ->  Index Scan using abbrev_abort_uuids__noabort_decreasing_idx on abbrev_abort_uuids
-(2 rows)
-
-SELECT id, noabort_increasing, noabort_decreasing FROM abbrev_abort_uuids ORDER BY noabort_decreasing LIMIT 5;
-  id   |          noabort_increasing          |          noabort_decreasing          
--------+--------------------------------------+--------------------------------------
- 20001 | 00009991-0000-0000-0000-000000020000 | 00000000-0000-0000-0000-000000000000
- 20010 | 00009991-0000-0000-0000-000000020000 | 00000000-0000-0000-0000-000000000000
-  9992 | 00009991-0000-0000-0000-000000009991 | 00000000-0000-0000-0000-000000010009
- 20000 | 00009990-0000-0000-0000-000000019999 | 00000001-0000-0000-0000-000000000001
-  9991 | 00009990-0000-0000-0000-000000009990 | 00000001-0000-0000-0000-000000010010
-(5 rows)
-
--- index creation using abbreviated keys, hitting abort
-CREATE INDEX abbrev_abort_uuids__abort_increasing_idx ON abbrev_abort_uuids (abort_increasing);
-CREATE INDEX abbrev_abort_uuids__abort_decreasing_idx ON abbrev_abort_uuids (abort_decreasing);
--- verify
-EXPLAIN (COSTS OFF)
-SELECT id, abort_increasing, abort_decreasing FROM abbrev_abort_uuids ORDER BY abort_increasing LIMIT 5;
-                                      QUERY PLAN                                       
----------------------------------------------------------------------------------------
- Limit
-   ->  Index Scan using abbrev_abort_uuids__abort_increasing_idx on abbrev_abort_uuids
-(2 rows)
-
-SELECT id, abort_increasing, abort_decreasing FROM abbrev_abort_uuids ORDER BY abort_increasing LIMIT 5;
-  id   |           abort_increasing           |           abort_decreasing           
--------+--------------------------------------+--------------------------------------
-     1 | 00000000-0000-0000-0000-000000000000 | 00000000-0000-0000-0000-000000020000
-     2 | 00000000-0000-0000-0000-000000000001 | 00000000-0000-0000-0000-000000019999
-     3 | 00000000-0000-0000-0000-000000000002 | 00000000-0000-0000-0000-000000019998
- 20004 | 00000000-0000-0000-0000-000000000002 | 00000000-0000-0000-0000-000000019998
-     4 | 00000000-0000-0000-0000-000000000003 | 00000000-0000-0000-0000-000000019997
-(5 rows)
-
-EXPLAIN (COSTS OFF)
-SELECT id, abort_increasing, abort_decreasing FROM abbrev_abort_uuids ORDER BY abort_decreasing LIMIT 5;
-                                      QUERY PLAN                                       
----------------------------------------------------------------------------------------
- Limit
-   ->  Index Scan using abbrev_abort_uuids__abort_decreasing_idx on abbrev_abort_uuids
-(2 rows)
-
-SELECT id, abort_increasing, abort_decreasing FROM abbrev_abort_uuids ORDER BY abort_decreasing LIMIT 5;
-  id   |           abort_increasing           |           abort_decreasing           
--------+--------------------------------------+--------------------------------------
- 20001 | 00000000-0000-0000-0000-000000020000 | 00000000-0000-0000-0000-000000000000
- 20010 | 00000000-0000-0000-0000-000000020000 | 00000000-0000-0000-0000-000000000000
- 20000 | 00000000-0000-0000-0000-000000019999 | 00000000-0000-0000-0000-000000000001
- 19999 | 00000000-0000-0000-0000-000000019998 | 00000000-0000-0000-0000-000000000002
- 19998 | 00000000-0000-0000-0000-000000019997 | 00000000-0000-0000-0000-000000000003
-(5 rows)
-
-----
--- Check CLUSTER uses of tuplesort wrt. abbreviated keys
-----
--- when aborting, increasing order
-BEGIN;
-SET LOCAL enable_indexscan = false;
-CLUSTER abbrev_abort_uuids USING abbrev_abort_uuids__abort_increasing_idx;
--- head
-SELECT id, abort_increasing, abort_decreasing, noabort_increasing, noabort_decreasing
-FROM abbrev_abort_uuids
-ORDER BY ctid LIMIT 5;
-  id   |           abort_increasing           |           abort_decreasing           |          noabort_increasing          |          noabort_decreasing          
--------+--------------------------------------+--------------------------------------+--------------------------------------+--------------------------------------
-     1 | 00000000-0000-0000-0000-000000000000 | 00000000-0000-0000-0000-000000020000 | 00000000-0000-0000-0000-000000000000 | 00009991-0000-0000-0000-000000020000
-     2 | 00000000-0000-0000-0000-000000000001 | 00000000-0000-0000-0000-000000019999 | 00000001-0000-0000-0000-000000000001 | 00009990-0000-0000-0000-000000019999
-     3 | 00000000-0000-0000-0000-000000000002 | 00000000-0000-0000-0000-000000019998 | 00000002-0000-0000-0000-000000000002 | 00009989-0000-0000-0000-000000019998
- 20004 | 00000000-0000-0000-0000-000000000002 | 00000000-0000-0000-0000-000000019998 | 00000002-0000-0000-0000-000000000002 | 00009989-0000-0000-0000-000000019998
-     4 | 00000000-0000-0000-0000-000000000003 | 00000000-0000-0000-0000-000000019997 | 00000003-0000-0000-0000-000000000003 | 00009988-0000-0000-0000-000000019997
-(5 rows)
-
--- tail
-SELECT id, abort_increasing, abort_decreasing, noabort_increasing, noabort_decreasing
-FROM abbrev_abort_uuids
-ORDER BY ctid DESC LIMIT 5;
-  id   |           abort_increasing           |           abort_decreasing           |          noabort_increasing          |          noabort_decreasing          
--------+--------------------------------------+--------------------------------------+--------------------------------------+--------------------------------------
-     0 |                                      |                                      |                                      | 
- 20002 |                                      |                                      |                                      | 
- 20003 |                                      |                                      |                                      | 
- 20001 | 00000000-0000-0000-0000-000000020000 | 00000000-0000-0000-0000-000000000000 | 00009991-0000-0000-0000-000000020000 | 00000000-0000-0000-0000-000000000000
- 20010 | 00000000-0000-0000-0000-000000020000 | 00000000-0000-0000-0000-000000000000 | 00009991-0000-0000-0000-000000020000 | 00000000-0000-0000-0000-000000000000
-(5 rows)
-
-ROLLBACK;
--- when aborting, decreasing order
-BEGIN;
-SET LOCAL enable_indexscan = false;
-CLUSTER abbrev_abort_uuids USING abbrev_abort_uuids__abort_decreasing_idx;
--- head
-SELECT id, abort_increasing, abort_decreasing, noabort_increasing, noabort_decreasing
-FROM abbrev_abort_uuids
-ORDER BY ctid LIMIT 5;
-  id   |           abort_increasing           |           abort_decreasing           |          noabort_increasing          |          noabort_decreasing          
--------+--------------------------------------+--------------------------------------+--------------------------------------+--------------------------------------
- 20010 | 00000000-0000-0000-0000-000000020000 | 00000000-0000-0000-0000-000000000000 | 00009991-0000-0000-0000-000000020000 | 00000000-0000-0000-0000-000000000000
- 20001 | 00000000-0000-0000-0000-000000020000 | 00000000-0000-0000-0000-000000000000 | 00009991-0000-0000-0000-000000020000 | 00000000-0000-0000-0000-000000000000
- 20000 | 00000000-0000-0000-0000-000000019999 | 00000000-0000-0000-0000-000000000001 | 00009990-0000-0000-0000-000000019999 | 00000001-0000-0000-0000-000000000001
- 19999 | 00000000-0000-0000-0000-000000019998 | 00000000-0000-0000-0000-000000000002 | 00009989-0000-0000-0000-000000019998 | 00000002-0000-0000-0000-000000000002
- 20009 | 00000000-0000-0000-0000-000000019997 | 00000000-0000-0000-0000-000000000003 | 00009988-0000-0000-0000-000000019997 | 00000003-0000-0000-0000-000000000003
-(5 rows)
-
--- tail
-SELECT id, abort_increasing, abort_decreasing, noabort_increasing, noabort_decreasing
-FROM abbrev_abort_uuids
-ORDER BY ctid DESC LIMIT 5;
-  id   |           abort_increasing           |           abort_decreasing           |          noabort_increasing          |          noabort_decreasing          
--------+--------------------------------------+--------------------------------------+--------------------------------------+--------------------------------------
-     0 |                                      |                                      |                                      | 
- 20002 |                                      |                                      |                                      | 
- 20003 |                                      |                                      |                                      | 
-     1 | 00000000-0000-0000-0000-000000000000 | 00000000-0000-0000-0000-000000020000 | 00000000-0000-0000-0000-000000000000 | 00009991-0000-0000-0000-000000020000
-     2 | 00000000-0000-0000-0000-000000000001 | 00000000-0000-0000-0000-000000019999 | 00000001-0000-0000-0000-000000000001 | 00009990-0000-0000-0000-000000019999
-(5 rows)
-
-ROLLBACK;
--- when not aborting, increasing order
-BEGIN;
-SET LOCAL enable_indexscan = false;
-CLUSTER abbrev_abort_uuids USING abbrev_abort_uuids__noabort_increasing_idx;
--- head
-SELECT id, abort_increasing, abort_decreasing, noabort_increasing, noabort_decreasing
-FROM abbrev_abort_uuids
-ORDER BY ctid LIMIT 5;
-  id   |           abort_increasing           |           abort_decreasing           |          noabort_increasing          |          noabort_decreasing          
--------+--------------------------------------+--------------------------------------+--------------------------------------+--------------------------------------
-     1 | 00000000-0000-0000-0000-000000000000 | 00000000-0000-0000-0000-000000020000 | 00000000-0000-0000-0000-000000000000 | 00009991-0000-0000-0000-000000020000
- 10010 | 00000000-0000-0000-0000-000000010009 | 00000000-0000-0000-0000-000000009991 | 00000000-0000-0000-0000-000000010009 | 00009991-0000-0000-0000-000000009991
-     2 | 00000000-0000-0000-0000-000000000001 | 00000000-0000-0000-0000-000000019999 | 00000001-0000-0000-0000-000000000001 | 00009990-0000-0000-0000-000000019999
- 10011 | 00000000-0000-0000-0000-000000010010 | 00000000-0000-0000-0000-000000009990 | 00000001-0000-0000-0000-000000010010 | 00009990-0000-0000-0000-000000009990
- 20004 | 00000000-0000-0000-0000-000000000002 | 00000000-0000-0000-0000-000000019998 | 00000002-0000-0000-0000-000000000002 | 00009989-0000-0000-0000-000000019998
-(5 rows)
-
--- tail
-SELECT id, abort_increasing, abort_decreasing, noabort_increasing, noabort_decreasing
-FROM abbrev_abort_uuids
-ORDER BY ctid DESC LIMIT 5;
-  id   |           abort_increasing           |           abort_decreasing           |          noabort_increasing          |          noabort_decreasing          
--------+--------------------------------------+--------------------------------------+--------------------------------------+--------------------------------------
-     0 |                                      |                                      |                                      | 
- 20002 |                                      |                                      |                                      | 
- 20003 |                                      |                                      |                                      | 
- 10009 | 00000000-0000-0000-0000-000000010008 | 00000000-0000-0000-0000-000000009992 | 00010008-0000-0000-0000-000000010008 | 00009992-0000-0000-0000-000000009992
- 10008 | 00000000-0000-0000-0000-000000010007 | 00000000-0000-0000-0000-000000009993 | 00010007-0000-0000-0000-000000010007 | 00009993-0000-0000-0000-000000009993
-(5 rows)
-
-ROLLBACK;
--- when no aborting, decreasing order
-BEGIN;
-SET LOCAL enable_indexscan = false;
-CLUSTER abbrev_abort_uuids USING abbrev_abort_uuids__noabort_decreasing_idx;
--- head
-SELECT id, abort_increasing, abort_decreasing, noabort_increasing, noabort_decreasing
-FROM abbrev_abort_uuids
-ORDER BY ctid LIMIT 5;
-  id   |           abort_increasing           |           abort_decreasing           |          noabort_increasing          |          noabort_decreasing          
--------+--------------------------------------+--------------------------------------+--------------------------------------+--------------------------------------
- 20010 | 00000000-0000-0000-0000-000000020000 | 00000000-0000-0000-0000-000000000000 | 00009991-0000-0000-0000-000000020000 | 00000000-0000-0000-0000-000000000000
- 20001 | 00000000-0000-0000-0000-000000020000 | 00000000-0000-0000-0000-000000000000 | 00009991-0000-0000-0000-000000020000 | 00000000-0000-0000-0000-000000000000
-  9992 | 00000000-0000-0000-0000-000000009991 | 00000000-0000-0000-0000-000000010009 | 00009991-0000-0000-0000-000000009991 | 00000000-0000-0000-0000-000000010009
- 20000 | 00000000-0000-0000-0000-000000019999 | 00000000-0000-0000-0000-000000000001 | 00009990-0000-0000-0000-000000019999 | 00000001-0000-0000-0000-000000000001
-  9991 | 00000000-0000-0000-0000-000000009990 | 00000000-0000-0000-0000-000000010010 | 00009990-0000-0000-0000-000000009990 | 00000001-0000-0000-0000-000000010010
-(5 rows)
-
--- tail
-SELECT id, abort_increasing, abort_decreasing, noabort_increasing, noabort_decreasing
-FROM abbrev_abort_uuids
-ORDER BY ctid DESC LIMIT 5;
-  id   |           abort_increasing           |           abort_decreasing           |          noabort_increasing          |          noabort_decreasing          
--------+--------------------------------------+--------------------------------------+--------------------------------------+--------------------------------------
-     0 |                                      |                                      |                                      | 
- 20003 |                                      |                                      |                                      | 
- 20002 |                                      |                                      |                                      | 
-  9993 | 00000000-0000-0000-0000-000000009992 | 00000000-0000-0000-0000-000000010008 | 00009992-0000-0000-0000-000000009992 | 00010008-0000-0000-0000-000000010008
-  9994 | 00000000-0000-0000-0000-000000009993 | 00000000-0000-0000-0000-000000010007 | 00009993-0000-0000-0000-000000009993 | 00010007-0000-0000-0000-000000010007
-(5 rows)
-
-ROLLBACK;
-----
--- test sorting of large datums VALUES
-----
--- Ensure the order is correct and values look intact
-SELECT LEFT(a,10),b FROM
-    (VALUES(REPEAT('a', 512 * 1024),1),(REPEAT('b', 512 * 1024),2)) v(a,b)
-ORDER BY v.a DESC;
-    left    | b 
-------------+---
- bbbbbbbbbb | 2
- aaaaaaaaaa | 1
-(2 rows)
-
-----
--- test forward and backward scans for in-memory and disk based tuplesort
-----
--- in-memory
-BEGIN;
-SET LOCAL enable_indexscan = false;
--- unfortunately can't show analyze output confirming sort method,
--- the memory used output wouldn't be stable
-EXPLAIN (COSTS OFF) DECLARE c SCROLL CURSOR FOR SELECT noabort_decreasing FROM abbrev_abort_uuids ORDER BY noabort_decreasing;
-              QUERY PLAN              
---------------------------------------
- Sort
-   Sort Key: noabort_decreasing
-   ->  Seq Scan on abbrev_abort_uuids
-(3 rows)
-
-DECLARE c SCROLL CURSOR FOR SELECT noabort_decreasing FROM abbrev_abort_uuids ORDER BY noabort_decreasing;
--- first and second
-FETCH NEXT FROM c;
-          noabort_decreasing          
---------------------------------------
- 00000000-0000-0000-0000-000000000000
-(1 row)
-
-FETCH NEXT FROM c;
-          noabort_decreasing          
---------------------------------------
- 00000000-0000-0000-0000-000000000000
-(1 row)
-
--- scroll beyond beginning
-FETCH BACKWARD FROM c;
-          noabort_decreasing          
---------------------------------------
- 00000000-0000-0000-0000-000000000000
-(1 row)
-
-FETCH BACKWARD FROM c;
- noabort_decreasing 
---------------------
-(0 rows)
-
-FETCH BACKWARD FROM c;
- noabort_decreasing 
---------------------
-(0 rows)
-
-FETCH BACKWARD FROM c;
- noabort_decreasing 
---------------------
-(0 rows)
-
-FETCH NEXT FROM c;
-          noabort_decreasing          
---------------------------------------
- 00000000-0000-0000-0000-000000000000
-(1 row)
-
--- scroll beyond end
-FETCH LAST FROM c;
- noabort_decreasing 
---------------------
- 
-(1 row)
-
-FETCH BACKWARD FROM c;
- noabort_decreasing 
---------------------
- 
-(1 row)
-
-FETCH NEXT FROM c;
- noabort_decreasing 
---------------------
- 
-(1 row)
-
-FETCH NEXT FROM c;
- noabort_decreasing 
---------------------
-(0 rows)
-
-FETCH NEXT FROM c;
- noabort_decreasing 
---------------------
-(0 rows)
-
-FETCH BACKWARD FROM c;
- noabort_decreasing 
---------------------
- 
-(1 row)
-
-FETCH NEXT FROM c;
- noabort_decreasing 
---------------------
-(0 rows)
-
-COMMIT;
--- disk based
-BEGIN;
-SET LOCAL enable_indexscan = false;
-SET LOCAL work_mem = '100kB';
--- unfortunately can't show analyze output confirming sort method,
--- the memory used output wouldn't be stable
-EXPLAIN (COSTS OFF) DECLARE c SCROLL CURSOR FOR SELECT noabort_decreasing FROM abbrev_abort_uuids ORDER BY noabort_decreasing;
-              QUERY PLAN              
---------------------------------------
- Sort
-   Sort Key: noabort_decreasing
-   ->  Seq Scan on abbrev_abort_uuids
-(3 rows)
-
-DECLARE c SCROLL CURSOR FOR SELECT noabort_decreasing FROM abbrev_abort_uuids ORDER BY noabort_decreasing;
--- first and second
-FETCH NEXT FROM c;
-          noabort_decreasing          
---------------------------------------
- 00000000-0000-0000-0000-000000000000
-(1 row)
-
-FETCH NEXT FROM c;
-          noabort_decreasing          
---------------------------------------
- 00000000-0000-0000-0000-000000000000
-(1 row)
-
--- scroll beyond beginning
-FETCH BACKWARD FROM c;
-          noabort_decreasing          
---------------------------------------
- 00000000-0000-0000-0000-000000000000
-(1 row)
-
-FETCH BACKWARD FROM c;
- noabort_decreasing 
---------------------
-(0 rows)
-
-FETCH BACKWARD FROM c;
- noabort_decreasing 
---------------------
-(0 rows)
-
-FETCH BACKWARD FROM c;
- noabort_decreasing 
---------------------
-(0 rows)
-
-FETCH NEXT FROM c;
-          noabort_decreasing          
---------------------------------------
- 00000000-0000-0000-0000-000000000000
-(1 row)
-
--- scroll beyond end
-FETCH LAST FROM c;
- noabort_decreasing 
---------------------
- 
-(1 row)
-
-FETCH BACKWARD FROM c;
- noabort_decreasing 
---------------------
- 
-(1 row)
-
-FETCH NEXT FROM c;
- noabort_decreasing 
---------------------
- 
-(1 row)
-
-FETCH NEXT FROM c;
- noabort_decreasing 
---------------------
-(0 rows)
-
-FETCH NEXT FROM c;
- noabort_decreasing 
---------------------
-(0 rows)
-
-FETCH BACKWARD FROM c;
- noabort_decreasing 
---------------------
- 
-(1 row)
-
-FETCH NEXT FROM c;
- noabort_decreasing 
---------------------
-(0 rows)
-
-COMMIT;
-----
--- test tuplesort using both in-memory and disk sort
----
--- memory based
-SELECT
-    -- fixed-width by-value datum
-    (array_agg(id ORDER BY id DESC NULLS FIRST))[0:5],
-    -- fixed-width by-ref datum
-    (array_agg(abort_increasing ORDER BY abort_increasing DESC NULLS LAST))[0:5],
-    -- variable-width datum
-    (array_agg(id::text ORDER BY id::text DESC NULLS LAST))[0:5],
-    -- fixed width by-value datum tuplesort
-    percentile_disc(0.99) WITHIN GROUP (ORDER BY id),
-    -- ensure state is shared
-    percentile_disc(0.01) WITHIN GROUP (ORDER BY id),
-    -- fixed width by-ref datum tuplesort
-    percentile_disc(0.8) WITHIN GROUP (ORDER BY abort_increasing),
-    -- variable width by-ref datum tuplesort
-    percentile_disc(0.2) WITHIN GROUP (ORDER BY id::text),
-    -- multi-column tuplesort
-    rank('00000000-0000-0000-0000-000000000000', '2', '2') WITHIN GROUP (ORDER BY noabort_increasing, id, id::text)
-FROM (
-    SELECT * FROM abbrev_abort_uuids
-    UNION ALL
-    SELECT NULL, NULL, NULL, NULL, NULL) s;
-           array_agg            |                                                                                         array_agg                                                                                          |         array_agg          | percentile_disc | percentile_disc |           percentile_disc            | percentile_disc | rank 
---------------------------------+--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+----------------------------+-----------------+-----------------+--------------------------------------+-----------------+------
- {NULL,20010,20009,20008,20007} | {00000000-0000-0000-0000-000000020000,00000000-0000-0000-0000-000000020000,00000000-0000-0000-0000-000000019999,00000000-0000-0000-0000-000000019998,00000000-0000-0000-0000-000000019997} | {9999,9998,9997,9996,9995} |           19810 |             200 | 00000000-0000-0000-0000-000000016003 | 136             |    2
-(1 row)
-
--- disk based (see also above)
-BEGIN;
-SET LOCAL work_mem = '100kB';
-SELECT
-    (array_agg(id ORDER BY id DESC NULLS FIRST))[0:5],
-    (array_agg(abort_increasing ORDER BY abort_increasing DESC NULLS LAST))[0:5],
-    (array_agg(id::text ORDER BY id::text DESC NULLS LAST))[0:5],
-    percentile_disc(0.99) WITHIN GROUP (ORDER BY id),
-    percentile_disc(0.01) WITHIN GROUP (ORDER BY id),
-    percentile_disc(0.8) WITHIN GROUP (ORDER BY abort_increasing),
-    percentile_disc(0.2) WITHIN GROUP (ORDER BY id::text),
-    rank('00000000-0000-0000-0000-000000000000', '2', '2') WITHIN GROUP (ORDER BY noabort_increasing, id, id::text)
-FROM (
-    SELECT * FROM abbrev_abort_uuids
-    UNION ALL
-    SELECT NULL, NULL, NULL, NULL, NULL) s;
-           array_agg            |                                                                                         array_agg                                                                                          |         array_agg          | percentile_disc | percentile_disc |           percentile_disc            | percentile_disc | rank 
---------------------------------+--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+----------------------------+-----------------+-----------------+--------------------------------------+-----------------+------
- {NULL,20010,20009,20008,20007} | {00000000-0000-0000-0000-000000020000,00000000-0000-0000-0000-000000020000,00000000-0000-0000-0000-000000019999,00000000-0000-0000-0000-000000019998,00000000-0000-0000-0000-000000019997} | {9999,9998,9997,9996,9995} |           19810 |             200 | 00000000-0000-0000-0000-000000016003 | 136             |    2
-(1 row)
-
-ROLLBACK;
-----
--- test tuplesort mark/restore
----
-CREATE TEMP TABLE test_mark_restore(col1 int, col2 int, col12 int);
--- need a few duplicates for mark/restore to matter
-INSERT INTO test_mark_restore(col1, col2, col12)
-   SELECT a.i, b.i, a.i * b.i FROM generate_series(1, 500) a(i), generate_series(1, 5) b(i);
-BEGIN;
-SET LOCAL enable_nestloop = off;
-SET LOCAL enable_hashjoin = off;
-SET LOCAL enable_material = off;
--- set query into variable once, to avoid repetition of the fairly long query
-SELECT $$
-    SELECT col12, count(distinct a.col1), count(distinct a.col2), count(distinct b.col1), count(distinct b.col2), count(*)
-    FROM test_mark_restore a
-        JOIN test_mark_restore b USING(col12)
-    GROUP BY 1
-    HAVING count(*) > 1
-    ORDER BY 2 DESC, 1 DESC, 3 DESC, 4 DESC, 5 DESC, 6 DESC
-    LIMIT 10
-$$ AS qry \gset
--- test mark/restore with in-memory sorts
-EXPLAIN (COSTS OFF) :qry;
-                                                                                 QUERY PLAN                                                                                  
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
- Limit
-   ->  Sort
-         Sort Key: (count(DISTINCT a.col1)) DESC, a.col12 DESC, (count(DISTINCT a.col2)) DESC, (count(DISTINCT b.col1)) DESC, (count(DISTINCT b.col2)) DESC, (count(*)) DESC
-         ->  GroupAggregate
-               Group Key: a.col12
-               Filter: (count(*) > 1)
-               ->  Incremental Sort
-                     Sort Key: a.col12 DESC, a.col1
-                     Presorted Key: a.col12
-                     ->  Merge Join
-                           Merge Cond: (a.col12 = b.col12)
-                           ->  Sort
-                                 Sort Key: a.col12 DESC
-                                 ->  Seq Scan on test_mark_restore a
-                           ->  Sort
-                                 Sort Key: b.col12 DESC
-                                 ->  Seq Scan on test_mark_restore b
-(17 rows)
-
-:qry;
- col12 | count | count | count | count | count 
--------+-------+-------+-------+-------+-------
-   480 |     5 |     5 |     5 |     5 |    25
-   420 |     5 |     5 |     5 |     5 |    25
-   360 |     5 |     5 |     5 |     5 |    25
-   300 |     5 |     5 |     5 |     5 |    25
-   240 |     5 |     5 |     5 |     5 |    25
-   180 |     5 |     5 |     5 |     5 |    25
-   120 |     5 |     5 |     5 |     5 |    25
-    60 |     5 |     5 |     5 |     5 |    25
-   960 |     4 |     4 |     4 |     4 |    16
-   900 |     4 |     4 |     4 |     4 |    16
-(10 rows)
-
--- test mark/restore with on-disk sorts
-SET LOCAL work_mem = '100kB';
-EXPLAIN (COSTS OFF) :qry;
-                                                                                 QUERY PLAN                                                                                  
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
- Limit
-   ->  Sort
-         Sort Key: (count(DISTINCT a.col1)) DESC, a.col12 DESC, (count(DISTINCT a.col2)) DESC, (count(DISTINCT b.col1)) DESC, (count(DISTINCT b.col2)) DESC, (count(*)) DESC
-         ->  GroupAggregate
-               Group Key: a.col12
-               Filter: (count(*) > 1)
-               ->  Incremental Sort
-                     Sort Key: a.col12 DESC, a.col1
-                     Presorted Key: a.col12
-                     ->  Merge Join
-                           Merge Cond: (a.col12 = b.col12)
-                           ->  Sort
-                                 Sort Key: a.col12 DESC
-                                 ->  Seq Scan on test_mark_restore a
-                           ->  Sort
-                                 Sort Key: b.col12 DESC
-                                 ->  Seq Scan on test_mark_restore b
-(17 rows)
-
-:qry;
- col12 | count | count | count | count | count 
--------+-------+-------+-------+-------+-------
-   480 |     5 |     5 |     5 |     5 |    25
-   420 |     5 |     5 |     5 |     5 |    25
-   360 |     5 |     5 |     5 |     5 |    25
-   300 |     5 |     5 |     5 |     5 |    25
-   240 |     5 |     5 |     5 |     5 |    25
-   180 |     5 |     5 |     5 |     5 |    25
-   120 |     5 |     5 |     5 |     5 |    25
-    60 |     5 |     5 |     5 |     5 |    25
-   960 |     4 |     4 |     4 |     4 |    16
-   900 |     4 |     4 |     4 |     4 |    16
-(10 rows)
-
-COMMIT;
+psql: error: connection to server on socket "/tmp/f_SDOOqtof/.s.PGSQL.16412" failed: No such file or directory
+	Is the server running locally and accepting connections on that socket?
diff -U3 /tmp/cirrus-ci-build/src/test/regress/expected/explain.out /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/explain.out
--- /tmp/cirrus-ci-build/src/test/regress/expected/explain.out	2024-09-20 04:07:19.010721357 +0000
+++ /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/explain.out	2024-09-20 04:17:09.137564744 +0000
@@ -1,731 +1,2 @@
---
--- EXPLAIN
---
--- There are many test cases elsewhere that use EXPLAIN as a vehicle for
--- checking something else (usually planner behavior).  This file is
--- concerned with testing EXPLAIN in its own right.
---
--- To produce stable regression test output, it's usually necessary to
--- ignore details such as exact costs or row counts.  These filter
--- functions replace changeable output details with fixed strings.
-create function explain_filter(text) returns setof text
-language plpgsql as
-$$
-declare
-    ln text;
-begin
-    for ln in execute $1
-    loop
-        -- Replace any numeric word with just 'N'
-        ln := regexp_replace(ln, '-?\m\d+\M', 'N', 'g');
-        -- In sort output, the above won't match units-suffixed numbers
-        ln := regexp_replace(ln, '\m\d+kB', 'NkB', 'g');
-        -- Ignore text-mode buffers output because it varies depending
-        -- on the system state
-        CONTINUE WHEN (ln ~ ' +Buffers: .*');
-        -- Ignore text-mode "Planning:" line because whether it's output
-        -- varies depending on the system state
-        CONTINUE WHEN (ln = 'Planning:');
-        return next ln;
-    end loop;
-end;
-$$;
--- To produce valid JSON output, replace numbers with "0" or "0.0" not "N"
-create function explain_filter_to_json(text) returns jsonb
-language plpgsql as
-$$
-declare
-    data text := '';
-    ln text;
-begin
-    for ln in execute $1
-    loop
-        -- Replace any numeric word with just '0'
-        ln := regexp_replace(ln, '\m\d+\M', '0', 'g');
-        data := data || ln;
-    end loop;
-    return data::jsonb;
-end;
-$$;
--- Disable JIT, or we'll get different output on machines where that's been
--- forced on
-set jit = off;
--- Similarly, disable track_io_timing, to avoid output differences when
--- enabled.
-set track_io_timing = off;
--- Simple cases
-select explain_filter('explain select * from int8_tbl i8');
-                     explain_filter                      
----------------------------------------------------------
- Seq Scan on int8_tbl i8  (cost=N.N..N.N rows=N width=N)
-(1 row)
-
-select explain_filter('explain (analyze) select * from int8_tbl i8');
-                                        explain_filter                                         
------------------------------------------------------------------------------------------------
- Seq Scan on int8_tbl i8  (cost=N.N..N.N rows=N width=N) (actual time=N.N..N.N rows=N loops=N)
- Planning Time: N.N ms
- Execution Time: N.N ms
-(3 rows)
-
-select explain_filter('explain (analyze, verbose) select * from int8_tbl i8');
-                                            explain_filter                                            
-------------------------------------------------------------------------------------------------------
- Seq Scan on public.int8_tbl i8  (cost=N.N..N.N rows=N width=N) (actual time=N.N..N.N rows=N loops=N)
-   Output: q1, q2
- Planning Time: N.N ms
- Execution Time: N.N ms
-(4 rows)
-
-select explain_filter('explain (analyze, buffers, format text) select * from int8_tbl i8');
-                                        explain_filter                                         
------------------------------------------------------------------------------------------------
- Seq Scan on int8_tbl i8  (cost=N.N..N.N rows=N width=N) (actual time=N.N..N.N rows=N loops=N)
- Planning Time: N.N ms
- Execution Time: N.N ms
-(3 rows)
-
-select explain_filter('explain (analyze, buffers, format xml) select * from int8_tbl i8');
-                     explain_filter                     
---------------------------------------------------------
- <explain xmlns="http://www.postgresql.org/N/explain"> +
-   <Query>                                             +
-     <Plan>                                            +
-       <Node-Type>Seq Scan</Node-Type>                 +
-       <Parallel-Aware>false</Parallel-Aware>          +
-       <Async-Capable>false</Async-Capable>            +
-       <Relation-Name>int8_tbl</Relation-Name>         +
-       <Alias>i8</Alias>                               +
-       <Startup-Cost>N.N</Startup-Cost>                +
-       <Total-Cost>N.N</Total-Cost>                    +
-       <Plan-Rows>N</Plan-Rows>                        +
-       <Plan-Width>N</Plan-Width>                      +
-       <Actual-Startup-Time>N.N</Actual-Startup-Time>  +
-       <Actual-Total-Time>N.N</Actual-Total-Time>      +
-       <Actual-Rows>N</Actual-Rows>                    +
-       <Actual-Loops>N</Actual-Loops>                  +
-       <Shared-Hit-Blocks>N</Shared-Hit-Blocks>        +
-       <Shared-Read-Blocks>N</Shared-Read-Blocks>      +
-       <Shared-Dirtied-Blocks>N</Shared-Dirtied-Blocks>+
-       <Shared-Written-Blocks>N</Shared-Written-Blocks>+
-       <Local-Hit-Blocks>N</Local-Hit-Blocks>          +
-       <Local-Read-Blocks>N</Local-Read-Blocks>        +
-       <Local-Dirtied-Blocks>N</Local-Dirtied-Blocks>  +
-       <Local-Written-Blocks>N</Local-Written-Blocks>  +
-       <Temp-Read-Blocks>N</Temp-Read-Blocks>          +
-       <Temp-Written-Blocks>N</Temp-Written-Blocks>    +
-     </Plan>                                           +
-     <Planning>                                        +
-       <Shared-Hit-Blocks>N</Shared-Hit-Blocks>        +
-       <Shared-Read-Blocks>N</Shared-Read-Blocks>      +
-       <Shared-Dirtied-Blocks>N</Shared-Dirtied-Blocks>+
-       <Shared-Written-Blocks>N</Shared-Written-Blocks>+
-       <Local-Hit-Blocks>N</Local-Hit-Blocks>          +
-       <Local-Read-Blocks>N</Local-Read-Blocks>        +
-       <Local-Dirtied-Blocks>N</Local-Dirtied-Blocks>  +
-       <Local-Written-Blocks>N</Local-Written-Blocks>  +
-       <Temp-Read-Blocks>N</Temp-Read-Blocks>          +
-       <Temp-Written-Blocks>N</Temp-Written-Blocks>    +
-     </Planning>                                       +
-     <Planning-Time>N.N</Planning-Time>                +
-     <Triggers>                                        +
-     </Triggers>                                       +
-     <Execution-Time>N.N</Execution-Time>              +
-   </Query>                                            +
- </explain>
-(1 row)
-
-select explain_filter('explain (analyze, serialize, buffers, format yaml) select * from int8_tbl i8');
-        explain_filter         
--------------------------------
- - Plan:                      +
-     Node Type: "Seq Scan"    +
-     Parallel Aware: false    +
-     Async Capable: false     +
-     Relation Name: "int8_tbl"+
-     Alias: "i8"              +
-     Startup Cost: N.N        +
-     Total Cost: N.N          +
-     Plan Rows: N             +
-     Plan Width: N            +
-     Actual Startup Time: N.N +
-     Actual Total Time: N.N   +
-     Actual Rows: N           +
-     Actual Loops: N          +
-     Shared Hit Blocks: N     +
-     Shared Read Blocks: N    +
-     Shared Dirtied Blocks: N +
-     Shared Written Blocks: N +
-     Local Hit Blocks: N      +
-     Local Read Blocks: N     +
-     Local Dirtied Blocks: N  +
-     Local Written Blocks: N  +
-     Temp Read Blocks: N      +
-     Temp Written Blocks: N   +
-   Planning:                  +
-     Shared Hit Blocks: N     +
-     Shared Read Blocks: N    +
-     Shared Dirtied Blocks: N +
-     Shared Written Blocks: N +
-     Local Hit Blocks: N      +
-     Local Read Blocks: N     +
-     Local Dirtied Blocks: N  +
-     Local Written Blocks: N  +
-     Temp Read Blocks: N      +
-     Temp Written Blocks: N   +
-   Planning Time: N.N         +
-   Triggers:                  +
-   Serialization:             +
-     Time: N.N                +
-     Output Volume: N         +
-     Format: "text"           +
-     Shared Hit Blocks: N     +
-     Shared Read Blocks: N    +
-     Shared Dirtied Blocks: N +
-     Shared Written Blocks: N +
-     Local Hit Blocks: N      +
-     Local Read Blocks: N     +
-     Local Dirtied Blocks: N  +
-     Local Written Blocks: N  +
-     Temp Read Blocks: N      +
-     Temp Written Blocks: N   +
-   Execution Time: N.N
-(1 row)
-
-select explain_filter('explain (buffers, format text) select * from int8_tbl i8');
-                     explain_filter                      
----------------------------------------------------------
- Seq Scan on int8_tbl i8  (cost=N.N..N.N rows=N width=N)
-(1 row)
-
-select explain_filter('explain (buffers, format json) select * from int8_tbl i8');
-           explain_filter           
-------------------------------------
- [                                 +
-   {                               +
-     "Plan": {                     +
-       "Node Type": "Seq Scan",    +
-       "Parallel Aware": false,    +
-       "Async Capable": false,     +
-       "Relation Name": "int8_tbl",+
-       "Alias": "i8",              +
-       "Startup Cost": N.N,        +
-       "Total Cost": N.N,          +
-       "Plan Rows": N,             +
-       "Plan Width": N,            +
-       "Shared Hit Blocks": N,     +
-       "Shared Read Blocks": N,    +
-       "Shared Dirtied Blocks": N, +
-       "Shared Written Blocks": N, +
-       "Local Hit Blocks": N,      +
-       "Local Read Blocks": N,     +
-       "Local Dirtied Blocks": N,  +
-       "Local Written Blocks": N,  +
-       "Temp Read Blocks": N,      +
-       "Temp Written Blocks": N    +
-     },                            +
-     "Planning": {                 +
-       "Shared Hit Blocks": N,     +
-       "Shared Read Blocks": N,    +
-       "Shared Dirtied Blocks": N, +
-       "Shared Written Blocks": N, +
-       "Local Hit Blocks": N,      +
-       "Local Read Blocks": N,     +
-       "Local Dirtied Blocks": N,  +
-       "Local Written Blocks": N,  +
-       "Temp Read Blocks": N,      +
-       "Temp Written Blocks": N    +
-     }                             +
-   }                               +
- ]
-(1 row)
-
--- Check output including I/O timings.  These fields are conditional
--- but always set in JSON format, so check them only in this case.
-set track_io_timing = on;
-select explain_filter('explain (analyze, buffers, format json) select * from int8_tbl i8');
-           explain_filter            
--------------------------------------
- [                                  +
-   {                                +
-     "Plan": {                      +
-       "Node Type": "Seq Scan",     +
-       "Parallel Aware": false,     +
-       "Async Capable": false,      +
-       "Relation Name": "int8_tbl", +
-       "Alias": "i8",               +
-       "Startup Cost": N.N,         +
-       "Total Cost": N.N,           +
-       "Plan Rows": N,              +
-       "Plan Width": N,             +
-       "Actual Startup Time": N.N,  +
-       "Actual Total Time": N.N,    +
-       "Actual Rows": N,            +
-       "Actual Loops": N,           +
-       "Shared Hit Blocks": N,      +
-       "Shared Read Blocks": N,     +
-       "Shared Dirtied Blocks": N,  +
-       "Shared Written Blocks": N,  +
-       "Local Hit Blocks": N,       +
-       "Local Read Blocks": N,      +
-       "Local Dirtied Blocks": N,   +
-       "Local Written Blocks": N,   +
-       "Temp Read Blocks": N,       +
-       "Temp Written Blocks": N,    +
-       "Shared I/O Read Time": N.N, +
-       "Shared I/O Write Time": N.N,+
-       "Local I/O Read Time": N.N,  +
-       "Local I/O Write Time": N.N, +
-       "Temp I/O Read Time": N.N,   +
-       "Temp I/O Write Time": N.N   +
-     },                             +
-     "Planning": {                  +
-       "Shared Hit Blocks": N,      +
-       "Shared Read Blocks": N,     +
-       "Shared Dirtied Blocks": N,  +
-       "Shared Written Blocks": N,  +
-       "Local Hit Blocks": N,       +
-       "Local Read Blocks": N,      +
-       "Local Dirtied Blocks": N,   +
-       "Local Written Blocks": N,   +
-       "Temp Read Blocks": N,       +
-       "Temp Written Blocks": N,    +
-       "Shared I/O Read Time": N.N, +
-       "Shared I/O Write Time": N.N,+
-       "Local I/O Read Time": N.N,  +
-       "Local I/O Write Time": N.N, +
-       "Temp I/O Read Time": N.N,   +
-       "Temp I/O Write Time": N.N   +
-     },                             +
-     "Planning Time": N.N,          +
-     "Triggers": [                  +
-     ],                             +
-     "Execution Time": N.N          +
-   }                                +
- ]
-(1 row)
-
-set track_io_timing = off;
--- SETTINGS option
--- We have to ignore other settings that might be imposed by the environment,
--- so printing the whole Settings field unfortunately won't do.
-begin;
-set local plan_cache_mode = force_generic_plan;
-select true as "OK"
-  from explain_filter('explain (settings) select * from int8_tbl i8') ln
-  where ln ~ '^ *Settings: .*plan_cache_mode = ''force_generic_plan''';
- OK 
-----
- t
-(1 row)
-
-select explain_filter_to_json('explain (settings, format json) select * from int8_tbl i8') #> '{0,Settings,plan_cache_mode}';
-       ?column?       
-----------------------
- "force_generic_plan"
-(1 row)
-
-rollback;
--- GENERIC_PLAN option
-select explain_filter('explain (generic_plan) select unique1 from tenk1 where thousand = $1');
-                                 explain_filter                                  
----------------------------------------------------------------------------------
- Bitmap Heap Scan on tenk1  (cost=N.N..N.N rows=N width=N)
-   Recheck Cond: (thousand = $N)
-   ->  Bitmap Index Scan on tenk1_thous_tenthous  (cost=N.N..N.N rows=N width=N)
-         Index Cond: (thousand = $N)
-(4 rows)
-
--- should fail
-select explain_filter('explain (analyze, generic_plan) select unique1 from tenk1 where thousand = $1');
-ERROR:  EXPLAIN options ANALYZE and GENERIC_PLAN cannot be used together
-CONTEXT:  PL/pgSQL function explain_filter(text) line 5 at FOR over EXECUTE statement
--- MEMORY option
-select explain_filter('explain (memory) select * from int8_tbl i8');
-                     explain_filter                      
----------------------------------------------------------
- Seq Scan on int8_tbl i8  (cost=N.N..N.N rows=N width=N)
-   Memory: used=NkB  allocated=NkB
-(2 rows)
-
-select explain_filter('explain (memory, analyze) select * from int8_tbl i8');
-                                        explain_filter                                         
------------------------------------------------------------------------------------------------
- Seq Scan on int8_tbl i8  (cost=N.N..N.N rows=N width=N) (actual time=N.N..N.N rows=N loops=N)
-   Memory: used=NkB  allocated=NkB
- Planning Time: N.N ms
- Execution Time: N.N ms
-(4 rows)
-
-select explain_filter('explain (memory, summary, format yaml) select * from int8_tbl i8');
-        explain_filter         
--------------------------------
- - Plan:                      +
-     Node Type: "Seq Scan"    +
-     Parallel Aware: false    +
-     Async Capable: false     +
-     Relation Name: "int8_tbl"+
-     Alias: "i8"              +
-     Startup Cost: N.N        +
-     Total Cost: N.N          +
-     Plan Rows: N             +
-     Plan Width: N            +
-   Planning:                  +
-     Memory Used: N           +
-     Memory Allocated: N      +
-   Planning Time: N.N
-(1 row)
-
-select explain_filter('explain (memory, analyze, format json) select * from int8_tbl i8');
-           explain_filter           
-------------------------------------
- [                                 +
-   {                               +
-     "Plan": {                     +
-       "Node Type": "Seq Scan",    +
-       "Parallel Aware": false,    +
-       "Async Capable": false,     +
-       "Relation Name": "int8_tbl",+
-       "Alias": "i8",              +
-       "Startup Cost": N.N,        +
-       "Total Cost": N.N,          +
-       "Plan Rows": N,             +
-       "Plan Width": N,            +
-       "Actual Startup Time": N.N, +
-       "Actual Total Time": N.N,   +
-       "Actual Rows": N,           +
-       "Actual Loops": N           +
-     },                            +
-     "Planning": {                 +
-       "Memory Used": N,           +
-       "Memory Allocated": N       +
-     },                            +
-     "Planning Time": N.N,         +
-     "Triggers": [                 +
-     ],                            +
-     "Execution Time": N.N         +
-   }                               +
- ]
-(1 row)
-
-prepare int8_query as select * from int8_tbl i8;
-select explain_filter('explain (memory) execute int8_query');
-                     explain_filter                      
----------------------------------------------------------
- Seq Scan on int8_tbl i8  (cost=N.N..N.N rows=N width=N)
-   Memory: used=NkB  allocated=NkB
-(2 rows)
-
--- Test EXPLAIN (GENERIC_PLAN) with partition pruning
--- partitions should be pruned at plan time, based on constants,
--- but there should be no pruning based on parameter placeholders
-create table gen_part (
-  key1 integer not null,
-  key2 integer not null
-) partition by list (key1);
-create table gen_part_1
-  partition of gen_part for values in (1)
-  partition by range (key2);
-create table gen_part_1_1
-  partition of gen_part_1 for values from (1) to (2);
-create table gen_part_1_2
-  partition of gen_part_1 for values from (2) to (3);
-create table gen_part_2
-  partition of gen_part for values in (2);
--- should scan gen_part_1_1 and gen_part_1_2, but not gen_part_2
-select explain_filter('explain (generic_plan) select key1, key2 from gen_part where key1 = 1 and key2 = $1');
-                              explain_filter                               
----------------------------------------------------------------------------
- Append  (cost=N.N..N.N rows=N width=N)
-   ->  Seq Scan on gen_part_1_1 gen_part_1  (cost=N.N..N.N rows=N width=N)
-         Filter: ((key1 = N) AND (key2 = $N))
-   ->  Seq Scan on gen_part_1_2 gen_part_2  (cost=N.N..N.N rows=N width=N)
-         Filter: ((key1 = N) AND (key2 = $N))
-(5 rows)
-
-drop table gen_part;
---
--- Test production of per-worker data
---
--- Unfortunately, because we don't know how many worker processes we'll
--- actually get (maybe none at all), we can't examine the "Workers" output
--- in any detail.  We can check that it parses correctly as JSON, and then
--- remove it from the displayed results.
-begin;
--- encourage use of parallel plans
-set parallel_setup_cost=0;
-set parallel_tuple_cost=0;
-set min_parallel_table_scan_size=0;
-set max_parallel_workers_per_gather=4;
-select jsonb_pretty(
-  explain_filter_to_json('explain (analyze, verbose, buffers, format json)
-                         select * from tenk1 order by tenthous')
-  -- remove "Workers" node of the Seq Scan plan node
-  #- '{0,Plan,Plans,0,Plans,0,Workers}'
-  -- remove "Workers" node of the Sort plan node
-  #- '{0,Plan,Plans,0,Workers}'
-  -- Also remove its sort-type fields, as those aren't 100% stable
-  #- '{0,Plan,Plans,0,Sort Method}'
-  #- '{0,Plan,Plans,0,Sort Space Type}'
-);
-                        jsonb_pretty                         
--------------------------------------------------------------
- [                                                          +
-     {                                                      +
-         "Plan": {                                          +
-             "Plans": [                                     +
-                 {                                          +
-                     "Plans": [                             +
-                         {                                  +
-                             "Alias": "tenk1",              +
-                             "Output": [                    +
-                                 "unique1",                 +
-                                 "unique2",                 +
-                                 "two",                     +
-                                 "four",                    +
-                                 "ten",                     +
-                                 "twenty",                  +
-                                 "hundred",                 +
-                                 "thousand",                +
-                                 "twothousand",             +
-                                 "fivethous",               +
-                                 "tenthous",                +
-                                 "odd",                     +
-                                 "even",                    +
-                                 "stringu1",                +
-                                 "stringu2",                +
-                                 "string4"                  +
-                             ],                             +
-                             "Schema": "public",            +
-                             "Node Type": "Seq Scan",       +
-                             "Plan Rows": 0,                +
-                             "Plan Width": 0,               +
-                             "Total Cost": 0.0,             +
-                             "Actual Rows": 0,              +
-                             "Actual Loops": 0,             +
-                             "Startup Cost": 0.0,           +
-                             "Async Capable": false,        +
-                             "Relation Name": "tenk1",      +
-                             "Parallel Aware": true,        +
-                             "Local Hit Blocks": 0,         +
-                             "Temp Read Blocks": 0,         +
-                             "Actual Total Time": 0.0,      +
-                             "Local Read Blocks": 0,        +
-                             "Shared Hit Blocks": 0,        +
-                             "Shared Read Blocks": 0,       +
-                             "Actual Startup Time": 0.0,    +
-                             "Parent Relationship": "Outer",+
-                             "Temp Written Blocks": 0,      +
-                             "Local Dirtied Blocks": 0,     +
-                             "Local Written Blocks": 0,     +
-                             "Shared Dirtied Blocks": 0,    +
-                             "Shared Written Blocks": 0     +
-                         }                                  +
-                     ],                                     +
-                     "Output": [                            +
-                         "unique1",                         +
-                         "unique2",                         +
-                         "two",                             +
-                         "four",                            +
-                         "ten",                             +
-                         "twenty",                          +
-                         "hundred",                         +
-                         "thousand",                        +
-                         "twothousand",                     +
-                         "fivethous",                       +
-                         "tenthous",                        +
-                         "odd",                             +
-                         "even",                            +
-                         "stringu1",                        +
-                         "stringu2",                        +
-                         "string4"                          +
-                     ],                                     +
-                     "Sort Key": [                          +
-                         "tenk1.tenthous"                   +
-                     ],                                     +
-                     "Node Type": "Sort",                   +
-                     "Plan Rows": 0,                        +
-                     "Plan Width": 0,                       +
-                     "Total Cost": 0.0,                     +
-                     "Actual Rows": 0,                      +
-                     "Actual Loops": 0,                     +
-                     "Startup Cost": 0.0,                   +
-                     "Async Capable": false,                +
-                     "Parallel Aware": false,               +
-                     "Sort Space Used": 0,                  +
-                     "Local Hit Blocks": 0,                 +
-                     "Temp Read Blocks": 0,                 +
-                     "Actual Total Time": 0.0,              +
-                     "Local Read Blocks": 0,                +
-                     "Shared Hit Blocks": 0,                +
-                     "Shared Read Blocks": 0,               +
-                     "Actual Startup Time": 0.0,            +
-                     "Parent Relationship": "Outer",        +
-                     "Temp Written Blocks": 0,              +
-                     "Local Dirtied Blocks": 0,             +
-                     "Local Written Blocks": 0,             +
-                     "Shared Dirtied Blocks": 0,            +
-                     "Shared Written Blocks": 0             +
-                 }                                          +
-             ],                                             +
-             "Output": [                                    +
-                 "unique1",                                 +
-                 "unique2",                                 +
-                 "two",                                     +
-                 "four",                                    +
-                 "ten",                                     +
-                 "twenty",                                  +
-                 "hundred",                                 +
-                 "thousand",                                +
-                 "twothousand",                             +
-                 "fivethous",                               +
-                 "tenthous",                                +
-                 "odd",                                     +
-                 "even",                                    +
-                 "stringu1",                                +
-                 "stringu2",                                +
-                 "string4"                                  +
-             ],                                             +
-             "Node Type": "Gather Merge",                   +
-             "Plan Rows": 0,                                +
-             "Plan Width": 0,                               +
-             "Total Cost": 0.0,                             +
-             "Actual Rows": 0,                              +
-             "Actual Loops": 0,                             +
-             "Startup Cost": 0.0,                           +
-             "Async Capable": false,                        +
-             "Parallel Aware": false,                       +
-             "Workers Planned": 0,                          +
-             "Local Hit Blocks": 0,                         +
-             "Temp Read Blocks": 0,                         +
-             "Workers Launched": 0,                         +
-             "Actual Total Time": 0.0,                      +
-             "Local Read Blocks": 0,                        +
-             "Shared Hit Blocks": 0,                        +
-             "Shared Read Blocks": 0,                       +
-             "Actual Startup Time": 0.0,                    +
-             "Temp Written Blocks": 0,                      +
-             "Local Dirtied Blocks": 0,                     +
-             "Local Written Blocks": 0,                     +
-             "Shared Dirtied Blocks": 0,                    +
-             "Shared Written Blocks": 0                     +
-         },                                                 +
-         "Planning": {                                      +
-             "Local Hit Blocks": 0,                         +
-             "Temp Read Blocks": 0,                         +
-             "Local Read Blocks": 0,                        +
-             "Shared Hit Blocks": 0,                        +
-             "Shared Read Blocks": 0,                       +
-             "Temp Written Blocks": 0,                      +
-             "Local Dirtied Blocks": 0,                     +
-             "Local Written Blocks": 0,                     +
-             "Shared Dirtied Blocks": 0,                    +
-             "Shared Written Blocks": 0                     +
-         },                                                 +
-         "Triggers": [                                      +
-         ],                                                 +
-         "Planning Time": 0.0,                              +
-         "Execution Time": 0.0                              +
-     }                                                      +
- ]
-(1 row)
-
-rollback;
--- Test display of temporary objects
-create temp table t1(f1 float8);
-create function pg_temp.mysin(float8) returns float8 language plpgsql
-as 'begin return sin($1); end';
-select explain_filter('explain (verbose) select * from t1 where pg_temp.mysin(f1) < 0.5');
-                       explain_filter                       
-------------------------------------------------------------
- Seq Scan on pg_temp.t1  (cost=N.N..N.N rows=N width=N)
-   Output: f1
-   Filter: (pg_temp.mysin(t1.f1) < 'N.N'::double precision)
-(3 rows)
-
--- Test compute_query_id
-set compute_query_id = on;
-select explain_filter('explain (verbose) select * from int8_tbl i8');
-                         explain_filter                         
-----------------------------------------------------------------
- Seq Scan on public.int8_tbl i8  (cost=N.N..N.N rows=N width=N)
-   Output: q1, q2
- Query Identifier: N
-(3 rows)
-
--- Test SERIALIZE option
-select explain_filter('explain (analyze,serialize) select * from int8_tbl i8');
-                                        explain_filter                                         
------------------------------------------------------------------------------------------------
- Seq Scan on int8_tbl i8  (cost=N.N..N.N rows=N width=N) (actual time=N.N..N.N rows=N loops=N)
- Planning Time: N.N ms
- Serialization: time=N.N ms  output=NkB  format=text
- Execution Time: N.N ms
-(4 rows)
-
-select explain_filter('explain (analyze,serialize text,buffers,timing off) select * from int8_tbl i8');
-                                 explain_filter                                  
----------------------------------------------------------------------------------
- Seq Scan on int8_tbl i8  (cost=N.N..N.N rows=N width=N) (actual rows=N loops=N)
- Planning Time: N.N ms
- Serialization: output=NkB  format=text
- Execution Time: N.N ms
-(4 rows)
-
-select explain_filter('explain (analyze,serialize binary,buffers,timing) select * from int8_tbl i8');
-                                        explain_filter                                         
------------------------------------------------------------------------------------------------
- Seq Scan on int8_tbl i8  (cost=N.N..N.N rows=N width=N) (actual time=N.N..N.N rows=N loops=N)
- Planning Time: N.N ms
- Serialization: time=N.N ms  output=NkB  format=binary
- Execution Time: N.N ms
-(4 rows)
-
--- this tests an edge case where we have no data to return
-select explain_filter('explain (analyze,serialize) create temp table explain_temp as select * from int8_tbl i8');
-                                        explain_filter                                         
------------------------------------------------------------------------------------------------
- Seq Scan on int8_tbl i8  (cost=N.N..N.N rows=N width=N) (actual time=N.N..N.N rows=N loops=N)
- Planning Time: N.N ms
- Serialization: time=N.N ms  output=NkB  format=text
- Execution Time: N.N ms
-(4 rows)
-
--- Test tuplestore storage usage in Window aggregate (memory case)
-select explain_filter('explain (analyze,costs off) select sum(n) over() from generate_series(1,10) a(n)');
-                                 explain_filter                                 
---------------------------------------------------------------------------------
- WindowAgg (actual time=N.N..N.N rows=N loops=N)
-   Storage: Memory  Maximum Storage: NkB
-   ->  Function Scan on generate_series a (actual time=N.N..N.N rows=N loops=N)
- Planning Time: N.N ms
- Execution Time: N.N ms
-(5 rows)
-
--- Test tuplestore storage usage in Window aggregate (disk case)
-set work_mem to 64;
-select explain_filter('explain (analyze,costs off) select sum(n) over() from generate_series(1,2000) a(n)');
-                                 explain_filter                                 
---------------------------------------------------------------------------------
- WindowAgg (actual time=N.N..N.N rows=N loops=N)
-   Storage: Disk  Maximum Storage: NkB
-   ->  Function Scan on generate_series a (actual time=N.N..N.N rows=N loops=N)
- Planning Time: N.N ms
- Execution Time: N.N ms
-(5 rows)
-
--- Test tuplestore storage usage in Window aggregate (memory and disk case, final result is disk)
-select explain_filter('explain (analyze,costs off) select sum(n) over(partition by m) from (SELECT n < 3 as m, n from generate_series(1,2000) a(n))');
-                                    explain_filter                                    
---------------------------------------------------------------------------------------
- WindowAgg (actual time=N.N..N.N rows=N loops=N)
-   Storage: Disk  Maximum Storage: NkB
-   ->  Sort (actual time=N.N..N.N rows=N loops=N)
-         Sort Key: ((a.n < N))
-         Sort Method: external merge  Disk: NkB
-         ->  Function Scan on generate_series a (actual time=N.N..N.N rows=N loops=N)
- Planning Time: N.N ms
- Execution Time: N.N ms
-(8 rows)
-
-reset work_mem;
+psql: error: connection to server on socket "/tmp/f_SDOOqtof/.s.PGSQL.16412" failed: No such file or directory
+	Is the server running locally and accepting connections on that socket?
diff -U3 /tmp/cirrus-ci-build/src/test/regress/expected/compression_1.out /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/compression.out
--- /tmp/cirrus-ci-build/src/test/regress/expected/compression_1.out	2024-09-20 04:07:19.002704771 +0000
+++ /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/compression.out	2024-09-20 04:17:09.153564728 +0000
@@ -1,360 +1,2 @@
-\set HIDE_TOAST_COMPRESSION false
--- ensure we get stable results regardless of installation's default
-SET default_toast_compression = 'pglz';
--- test creating table with compression method
-CREATE TABLE cmdata(f1 text COMPRESSION pglz);
-CREATE INDEX idx ON cmdata(f1);
-INSERT INTO cmdata VALUES(repeat('1234567890', 1000));
-\d+ cmdata
-                                        Table "public.cmdata"
- Column | Type | Collation | Nullable | Default | Storage  | Compression | Stats target | Description 
---------+------+-----------+----------+---------+----------+-------------+--------------+-------------
- f1     | text |           |          |         | extended | pglz        |              | 
-Indexes:
-    "idx" btree (f1)
-
-CREATE TABLE cmdata1(f1 TEXT COMPRESSION lz4);
-ERROR:  compression method lz4 not supported
-DETAIL:  This functionality requires the server to be built with lz4 support.
-INSERT INTO cmdata1 VALUES(repeat('1234567890', 1004));
-ERROR:  relation "cmdata1" does not exist
-LINE 1: INSERT INTO cmdata1 VALUES(repeat('1234567890', 1004));
-                    ^
-\d+ cmdata1
--- verify stored compression method in the data
-SELECT pg_column_compression(f1) FROM cmdata;
- pg_column_compression 
------------------------
- pglz
-(1 row)
-
-SELECT pg_column_compression(f1) FROM cmdata1;
-ERROR:  relation "cmdata1" does not exist
-LINE 1: SELECT pg_column_compression(f1) FROM cmdata1;
-                                              ^
--- decompress data slice
-SELECT SUBSTR(f1, 200, 5) FROM cmdata;
- substr 
---------
- 01234
-(1 row)
-
-SELECT SUBSTR(f1, 2000, 50) FROM cmdata1;
-ERROR:  relation "cmdata1" does not exist
-LINE 1: SELECT SUBSTR(f1, 2000, 50) FROM cmdata1;
-                                         ^
--- copy with table creation
-SELECT * INTO cmmove1 FROM cmdata;
-\d+ cmmove1
-                                        Table "public.cmmove1"
- Column | Type | Collation | Nullable | Default | Storage  | Compression | Stats target | Description 
---------+------+-----------+----------+---------+----------+-------------+--------------+-------------
- f1     | text |           |          |         | extended |             |              | 
-
-SELECT pg_column_compression(f1) FROM cmmove1;
- pg_column_compression 
------------------------
- pglz
-(1 row)
-
--- copy to existing table
-CREATE TABLE cmmove3(f1 text COMPRESSION pglz);
-INSERT INTO cmmove3 SELECT * FROM cmdata;
-INSERT INTO cmmove3 SELECT * FROM cmdata1;
-ERROR:  relation "cmdata1" does not exist
-LINE 1: INSERT INTO cmmove3 SELECT * FROM cmdata1;
-                                          ^
-SELECT pg_column_compression(f1) FROM cmmove3;
- pg_column_compression 
------------------------
- pglz
-(1 row)
-
--- test LIKE INCLUDING COMPRESSION
-CREATE TABLE cmdata2 (LIKE cmdata1 INCLUDING COMPRESSION);
-ERROR:  relation "cmdata1" does not exist
-LINE 1: CREATE TABLE cmdata2 (LIKE cmdata1 INCLUDING COMPRESSION);
-                                   ^
-\d+ cmdata2
-DROP TABLE cmdata2;
-ERROR:  table "cmdata2" does not exist
--- try setting compression for incompressible data type
-CREATE TABLE cmdata2 (f1 int COMPRESSION pglz);
-ERROR:  column data type integer does not support compression
--- update using datum from different table
-CREATE TABLE cmmove2(f1 text COMPRESSION pglz);
-INSERT INTO cmmove2 VALUES (repeat('1234567890', 1004));
-SELECT pg_column_compression(f1) FROM cmmove2;
- pg_column_compression 
------------------------
- pglz
-(1 row)
-
-UPDATE cmmove2 SET f1 = cmdata1.f1 FROM cmdata1;
-ERROR:  relation "cmdata1" does not exist
-LINE 1: UPDATE cmmove2 SET f1 = cmdata1.f1 FROM cmdata1;
-                                                ^
-SELECT pg_column_compression(f1) FROM cmmove2;
- pg_column_compression 
------------------------
- pglz
-(1 row)
-
--- test externally stored compressed data
-CREATE OR REPLACE FUNCTION large_val() RETURNS TEXT LANGUAGE SQL AS
-'select array_agg(fipshash(g::text))::text from generate_series(1, 256) g';
-CREATE TABLE cmdata2 (f1 text COMPRESSION pglz);
-INSERT INTO cmdata2 SELECT large_val() || repeat('a', 4000);
-SELECT pg_column_compression(f1) FROM cmdata2;
- pg_column_compression 
------------------------
- pglz
-(1 row)
-
-INSERT INTO cmdata1 SELECT large_val() || repeat('a', 4000);
-ERROR:  relation "cmdata1" does not exist
-LINE 1: INSERT INTO cmdata1 SELECT large_val() || repeat('a', 4000);
-                    ^
-SELECT pg_column_compression(f1) FROM cmdata1;
-ERROR:  relation "cmdata1" does not exist
-LINE 1: SELECT pg_column_compression(f1) FROM cmdata1;
-                                              ^
-SELECT SUBSTR(f1, 200, 5) FROM cmdata1;
-ERROR:  relation "cmdata1" does not exist
-LINE 1: SELECT SUBSTR(f1, 200, 5) FROM cmdata1;
-                                       ^
-SELECT SUBSTR(f1, 200, 5) FROM cmdata2;
- substr 
---------
- 79026
-(1 row)
-
-DROP TABLE cmdata2;
---test column type update varlena/non-varlena
-CREATE TABLE cmdata2 (f1 int);
-\d+ cmdata2
-                                         Table "public.cmdata2"
- Column |  Type   | Collation | Nullable | Default | Storage | Compression | Stats target | Description 
---------+---------+-----------+----------+---------+---------+-------------+--------------+-------------
- f1     | integer |           |          |         | plain   |             |              | 
-
-ALTER TABLE cmdata2 ALTER COLUMN f1 TYPE varchar;
-\d+ cmdata2
-                                              Table "public.cmdata2"
- Column |       Type        | Collation | Nullable | Default | Storage  | Compression | Stats target | Description 
---------+-------------------+-----------+----------+---------+----------+-------------+--------------+-------------
- f1     | character varying |           |          |         | extended |             |              | 
-
-ALTER TABLE cmdata2 ALTER COLUMN f1 TYPE int USING f1::integer;
-\d+ cmdata2
-                                         Table "public.cmdata2"
- Column |  Type   | Collation | Nullable | Default | Storage | Compression | Stats target | Description 
---------+---------+-----------+----------+---------+---------+-------------+--------------+-------------
- f1     | integer |           |          |         | plain   |             |              | 
-
---changing column storage should not impact the compression method
---but the data should not be compressed
-ALTER TABLE cmdata2 ALTER COLUMN f1 TYPE varchar;
-ALTER TABLE cmdata2 ALTER COLUMN f1 SET COMPRESSION pglz;
-\d+ cmdata2
-                                              Table "public.cmdata2"
- Column |       Type        | Collation | Nullable | Default | Storage  | Compression | Stats target | Description 
---------+-------------------+-----------+----------+---------+----------+-------------+--------------+-------------
- f1     | character varying |           |          |         | extended | pglz        |              | 
-
-ALTER TABLE cmdata2 ALTER COLUMN f1 SET STORAGE plain;
-\d+ cmdata2
-                                              Table "public.cmdata2"
- Column |       Type        | Collation | Nullable | Default | Storage | Compression | Stats target | Description 
---------+-------------------+-----------+----------+---------+---------+-------------+--------------+-------------
- f1     | character varying |           |          |         | plain   | pglz        |              | 
-
-INSERT INTO cmdata2 VALUES (repeat('123456789', 800));
-SELECT pg_column_compression(f1) FROM cmdata2;
- pg_column_compression 
------------------------
- 
-(1 row)
-
--- test compression with materialized view
-CREATE MATERIALIZED VIEW compressmv(x) AS SELECT * FROM cmdata1;
-ERROR:  relation "cmdata1" does not exist
-LINE 1: ...TE MATERIALIZED VIEW compressmv(x) AS SELECT * FROM cmdata1;
-                                                               ^
-\d+ compressmv
-SELECT pg_column_compression(f1) FROM cmdata1;
-ERROR:  relation "cmdata1" does not exist
-LINE 1: SELECT pg_column_compression(f1) FROM cmdata1;
-                                              ^
-SELECT pg_column_compression(x) FROM compressmv;
-ERROR:  relation "compressmv" does not exist
-LINE 1: SELECT pg_column_compression(x) FROM compressmv;
-                                             ^
--- test compression with partition
-CREATE TABLE cmpart(f1 text COMPRESSION lz4) PARTITION BY HASH(f1);
-ERROR:  compression method lz4 not supported
-DETAIL:  This functionality requires the server to be built with lz4 support.
-CREATE TABLE cmpart1 PARTITION OF cmpart FOR VALUES WITH (MODULUS 2, REMAINDER 0);
-ERROR:  relation "cmpart" does not exist
-CREATE TABLE cmpart2(f1 text COMPRESSION pglz);
-ALTER TABLE cmpart ATTACH PARTITION cmpart2 FOR VALUES WITH (MODULUS 2, REMAINDER 1);
-ERROR:  relation "cmpart" does not exist
-INSERT INTO cmpart VALUES (repeat('123456789', 1004));
-ERROR:  relation "cmpart" does not exist
-LINE 1: INSERT INTO cmpart VALUES (repeat('123456789', 1004));
-                    ^
-INSERT INTO cmpart VALUES (repeat('123456789', 4004));
-ERROR:  relation "cmpart" does not exist
-LINE 1: INSERT INTO cmpart VALUES (repeat('123456789', 4004));
-                    ^
-SELECT pg_column_compression(f1) FROM cmpart1;
-ERROR:  relation "cmpart1" does not exist
-LINE 1: SELECT pg_column_compression(f1) FROM cmpart1;
-                                              ^
-SELECT pg_column_compression(f1) FROM cmpart2;
- pg_column_compression 
------------------------
-(0 rows)
-
--- test compression with inheritance
-CREATE TABLE cminh() INHERITS(cmdata, cmdata1); -- error
-ERROR:  relation "cmdata1" does not exist
-CREATE TABLE cminh(f1 TEXT COMPRESSION lz4) INHERITS(cmdata); -- error
-NOTICE:  merging column "f1" with inherited definition
-ERROR:  column "f1" has a compression method conflict
-DETAIL:  pglz versus lz4
-CREATE TABLE cmdata3(f1 text);
-CREATE TABLE cminh() INHERITS (cmdata, cmdata3);
-NOTICE:  merging multiple inherited definitions of column "f1"
--- test default_toast_compression GUC
-SET default_toast_compression = '';
-ERROR:  invalid value for parameter "default_toast_compression": ""
-HINT:  Available values: pglz.
-SET default_toast_compression = 'I do not exist compression';
-ERROR:  invalid value for parameter "default_toast_compression": "I do not exist compression"
-HINT:  Available values: pglz.
-SET default_toast_compression = 'lz4';
-ERROR:  invalid value for parameter "default_toast_compression": "lz4"
-HINT:  Available values: pglz.
-SET default_toast_compression = 'pglz';
--- test alter compression method
-ALTER TABLE cmdata ALTER COLUMN f1 SET COMPRESSION lz4;
-ERROR:  compression method lz4 not supported
-DETAIL:  This functionality requires the server to be built with lz4 support.
-INSERT INTO cmdata VALUES (repeat('123456789', 4004));
-\d+ cmdata
-                                        Table "public.cmdata"
- Column | Type | Collation | Nullable | Default | Storage  | Compression | Stats target | Description 
---------+------+-----------+----------+---------+----------+-------------+--------------+-------------
- f1     | text |           |          |         | extended | pglz        |              | 
-Indexes:
-    "idx" btree (f1)
-Child tables: cminh
-
-SELECT pg_column_compression(f1) FROM cmdata;
- pg_column_compression 
------------------------
- pglz
- pglz
-(2 rows)
-
-ALTER TABLE cmdata2 ALTER COLUMN f1 SET COMPRESSION default;
-\d+ cmdata2
-                                              Table "public.cmdata2"
- Column |       Type        | Collation | Nullable | Default | Storage | Compression | Stats target | Description 
---------+-------------------+-----------+----------+---------+---------+-------------+--------------+-------------
- f1     | character varying |           |          |         | plain   |             |              | 
-
--- test alter compression method for materialized views
-ALTER MATERIALIZED VIEW compressmv ALTER COLUMN x SET COMPRESSION lz4;
-ERROR:  relation "compressmv" does not exist
-\d+ compressmv
--- test alter compression method for partitioned tables
-ALTER TABLE cmpart1 ALTER COLUMN f1 SET COMPRESSION pglz;
-ERROR:  relation "cmpart1" does not exist
-ALTER TABLE cmpart2 ALTER COLUMN f1 SET COMPRESSION lz4;
-ERROR:  compression method lz4 not supported
-DETAIL:  This functionality requires the server to be built with lz4 support.
--- new data should be compressed with the current compression method
-INSERT INTO cmpart VALUES (repeat('123456789', 1004));
-ERROR:  relation "cmpart" does not exist
-LINE 1: INSERT INTO cmpart VALUES (repeat('123456789', 1004));
-                    ^
-INSERT INTO cmpart VALUES (repeat('123456789', 4004));
-ERROR:  relation "cmpart" does not exist
-LINE 1: INSERT INTO cmpart VALUES (repeat('123456789', 4004));
-                    ^
-SELECT pg_column_compression(f1) FROM cmpart1;
-ERROR:  relation "cmpart1" does not exist
-LINE 1: SELECT pg_column_compression(f1) FROM cmpart1;
-                                              ^
-SELECT pg_column_compression(f1) FROM cmpart2;
- pg_column_compression 
------------------------
-(0 rows)
-
--- VACUUM FULL does not recompress
-SELECT pg_column_compression(f1) FROM cmdata;
- pg_column_compression 
------------------------
- pglz
- pglz
-(2 rows)
-
-VACUUM FULL cmdata;
-SELECT pg_column_compression(f1) FROM cmdata;
- pg_column_compression 
------------------------
- pglz
- pglz
-(2 rows)
-
--- test expression index
-DROP TABLE cmdata2;
-CREATE TABLE cmdata2 (f1 TEXT COMPRESSION pglz, f2 TEXT COMPRESSION lz4);
-ERROR:  compression method lz4 not supported
-DETAIL:  This functionality requires the server to be built with lz4 support.
-CREATE UNIQUE INDEX idx1 ON cmdata2 ((f1 || f2));
-ERROR:  relation "cmdata2" does not exist
-INSERT INTO cmdata2 VALUES((SELECT array_agg(fipshash(g::TEXT))::TEXT FROM
-generate_series(1, 50) g), VERSION());
-ERROR:  relation "cmdata2" does not exist
-LINE 1: INSERT INTO cmdata2 VALUES((SELECT array_agg(fipshash(g::TEX...
-                    ^
--- check data is ok
-SELECT length(f1) FROM cmdata;
- length 
---------
-  10000
-  36036
-(2 rows)
-
-SELECT length(f1) FROM cmdata1;
-ERROR:  relation "cmdata1" does not exist
-LINE 1: SELECT length(f1) FROM cmdata1;
-                               ^
-SELECT length(f1) FROM cmmove1;
- length 
---------
-  10000
-(1 row)
-
-SELECT length(f1) FROM cmmove2;
- length 
---------
-  10040
-(1 row)
-
-SELECT length(f1) FROM cmmove3;
- length 
---------
-  10000
-(1 row)
-
-CREATE TABLE badcompresstbl (a text COMPRESSION I_Do_Not_Exist_Compression); -- fails
-ERROR:  invalid compression method "i_do_not_exist_compression"
-CREATE TABLE badcompresstbl (a text);
-ALTER TABLE badcompresstbl ALTER a SET COMPRESSION I_Do_Not_Exist_Compression; -- fails
-ERROR:  invalid compression method "i_do_not_exist_compression"
-DROP TABLE badcompresstbl;
-\set HIDE_TOAST_COMPRESSION true
+psql: error: connection to server on socket "/tmp/f_SDOOqtof/.s.PGSQL.16412" failed: No such file or directory
+	Is the server running locally and accepting connections on that socket?
diff -U3 /tmp/cirrus-ci-build/src/test/regress/expected/memoize.out /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/memoize.out
--- /tmp/cirrus-ci-build/src/test/regress/expected/memoize.out	2024-09-20 04:07:19.038779407 +0000
+++ /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/memoize.out	2024-09-20 04:17:09.145564736 +0000
@@ -1,483 +1,2 @@
--- Perform tests on the Memoize node.
--- The cache hits/misses/evictions from the Memoize node can vary between
--- machines.  Let's just replace the number with an 'N'.  In order to allow us
--- to perform validation when the measure was zero, we replace a zero value
--- with "Zero".  All other numbers are replaced with 'N'.
-create function explain_memoize(query text, hide_hitmiss bool) returns setof text
-language plpgsql as
-$$
-declare
-    ln text;
-begin
-    for ln in
-        execute format('explain (analyze, costs off, summary off, timing off) %s',
-            query)
-    loop
-        if hide_hitmiss = true then
-                ln := regexp_replace(ln, 'Hits: 0', 'Hits: Zero');
-                ln := regexp_replace(ln, 'Hits: \d+', 'Hits: N');
-                ln := regexp_replace(ln, 'Misses: 0', 'Misses: Zero');
-                ln := regexp_replace(ln, 'Misses: \d+', 'Misses: N');
-        end if;
-        ln := regexp_replace(ln, 'Evictions: 0', 'Evictions: Zero');
-        ln := regexp_replace(ln, 'Evictions: \d+', 'Evictions: N');
-        ln := regexp_replace(ln, 'Memory Usage: \d+', 'Memory Usage: N');
-	ln := regexp_replace(ln, 'Heap Fetches: \d+', 'Heap Fetches: N');
-	ln := regexp_replace(ln, 'loops=\d+', 'loops=N');
-        return next ln;
-    end loop;
-end;
-$$;
--- Ensure we get a memoize node on the inner side of the nested loop
-SET enable_hashjoin TO off;
-SET enable_bitmapscan TO off;
-SELECT explain_memoize('
-SELECT COUNT(*),AVG(t1.unique1) FROM tenk1 t1
-INNER JOIN tenk1 t2 ON t1.unique1 = t2.twenty
-WHERE t2.unique1 < 1000;', false);
-                                      explain_memoize                                      
--------------------------------------------------------------------------------------------
- Aggregate (actual rows=1 loops=N)
-   ->  Nested Loop (actual rows=1000 loops=N)
-         ->  Seq Scan on tenk1 t2 (actual rows=1000 loops=N)
-               Filter: (unique1 < 1000)
-               Rows Removed by Filter: 9000
-         ->  Memoize (actual rows=1 loops=N)
-               Cache Key: t2.twenty
-               Cache Mode: logical
-               Hits: 980  Misses: 20  Evictions: Zero  Overflows: 0  Memory Usage: NkB
-               ->  Index Only Scan using tenk1_unique1 on tenk1 t1 (actual rows=1 loops=N)
-                     Index Cond: (unique1 = t2.twenty)
-                     Heap Fetches: N
-(12 rows)
-
--- And check we get the expected results.
-SELECT COUNT(*),AVG(t1.unique1) FROM tenk1 t1
-INNER JOIN tenk1 t2 ON t1.unique1 = t2.twenty
-WHERE t2.unique1 < 1000;
- count |        avg         
--------+--------------------
-  1000 | 9.5000000000000000
-(1 row)
-
--- Try with LATERAL joins
-SELECT explain_memoize('
-SELECT COUNT(*),AVG(t2.unique1) FROM tenk1 t1,
-LATERAL (SELECT t2.unique1 FROM tenk1 t2
-         WHERE t1.twenty = t2.unique1 OFFSET 0) t2
-WHERE t1.unique1 < 1000;', false);
-                                      explain_memoize                                      
--------------------------------------------------------------------------------------------
- Aggregate (actual rows=1 loops=N)
-   ->  Nested Loop (actual rows=1000 loops=N)
-         ->  Seq Scan on tenk1 t1 (actual rows=1000 loops=N)
-               Filter: (unique1 < 1000)
-               Rows Removed by Filter: 9000
-         ->  Memoize (actual rows=1 loops=N)
-               Cache Key: t1.twenty
-               Cache Mode: binary
-               Hits: 980  Misses: 20  Evictions: Zero  Overflows: 0  Memory Usage: NkB
-               ->  Index Only Scan using tenk1_unique1 on tenk1 t2 (actual rows=1 loops=N)
-                     Index Cond: (unique1 = t1.twenty)
-                     Heap Fetches: N
-(12 rows)
-
--- And check we get the expected results.
-SELECT COUNT(*),AVG(t2.unique1) FROM tenk1 t1,
-LATERAL (SELECT t2.unique1 FROM tenk1 t2
-         WHERE t1.twenty = t2.unique1 OFFSET 0) t2
-WHERE t1.unique1 < 1000;
- count |        avg         
--------+--------------------
-  1000 | 9.5000000000000000
-(1 row)
-
--- Try with LATERAL joins
-SELECT explain_memoize('
-SELECT COUNT(*),AVG(t2.t1two) FROM tenk1 t1 LEFT JOIN
-LATERAL (
-    SELECT t1.two as t1two, * FROM tenk1 t2 WHERE t2.unique1 < 4 OFFSET 0
-) t2
-ON t1.two = t2.two
-WHERE t1.unique1 < 10;', false);
-                                       explain_memoize                                        
-----------------------------------------------------------------------------------------------
- Aggregate (actual rows=1 loops=N)
-   ->  Nested Loop Left Join (actual rows=20 loops=N)
-         ->  Index Scan using tenk1_unique1 on tenk1 t1 (actual rows=10 loops=N)
-               Index Cond: (unique1 < 10)
-         ->  Memoize (actual rows=2 loops=N)
-               Cache Key: t1.two
-               Cache Mode: binary
-               Hits: 8  Misses: 2  Evictions: Zero  Overflows: 0  Memory Usage: NkB
-               ->  Subquery Scan on t2 (actual rows=2 loops=N)
-                     Filter: (t1.two = t2.two)
-                     Rows Removed by Filter: 2
-                     ->  Index Scan using tenk1_unique1 on tenk1 t2_1 (actual rows=4 loops=N)
-                           Index Cond: (unique1 < 4)
-(13 rows)
-
--- And check we get the expected results.
-SELECT COUNT(*),AVG(t2.t1two) FROM tenk1 t1 LEFT JOIN
-LATERAL (
-    SELECT t1.two as t1two, * FROM tenk1 t2 WHERE t2.unique1 < 4 OFFSET 0
-) t2
-ON t1.two = t2.two
-WHERE t1.unique1 < 10;
- count |          avg           
--------+------------------------
-    20 | 0.50000000000000000000
-(1 row)
-
--- Try with LATERAL references within PlaceHolderVars
-SELECT explain_memoize('
-SELECT COUNT(*), AVG(t1.twenty) FROM tenk1 t1 LEFT JOIN
-LATERAL (SELECT t1.two+1 AS c1, t2.unique1 AS c2 FROM tenk1 t2) s ON TRUE
-WHERE s.c1 = s.c2 AND t1.unique1 < 1000;', false);
-                                      explain_memoize                                      
--------------------------------------------------------------------------------------------
- Aggregate (actual rows=1 loops=N)
-   ->  Nested Loop (actual rows=1000 loops=N)
-         ->  Seq Scan on tenk1 t1 (actual rows=1000 loops=N)
-               Filter: (unique1 < 1000)
-               Rows Removed by Filter: 9000
-         ->  Memoize (actual rows=1 loops=N)
-               Cache Key: (t1.two + 1)
-               Cache Mode: binary
-               Hits: 998  Misses: 2  Evictions: Zero  Overflows: 0  Memory Usage: NkB
-               ->  Index Only Scan using tenk1_unique1 on tenk1 t2 (actual rows=1 loops=N)
-                     Filter: ((t1.two + 1) = unique1)
-                     Rows Removed by Filter: 9999
-                     Heap Fetches: N
-(13 rows)
-
--- And check we get the expected results.
-SELECT COUNT(*), AVG(t1.twenty) FROM tenk1 t1 LEFT JOIN
-LATERAL (SELECT t1.two+1 AS c1, t2.unique1 AS c2 FROM tenk1 t2) s ON TRUE
-WHERE s.c1 = s.c2 AND t1.unique1 < 1000;
- count |        avg         
--------+--------------------
-  1000 | 9.5000000000000000
-(1 row)
-
--- Ensure we do not omit the cache keys from PlaceHolderVars
-SELECT explain_memoize('
-SELECT COUNT(*), AVG(t1.twenty) FROM tenk1 t1 LEFT JOIN
-LATERAL (SELECT t1.twenty AS c1, t2.unique1 AS c2, t2.two FROM tenk1 t2) s
-ON t1.two = s.two
-WHERE s.c1 = s.c2 AND t1.unique1 < 1000;', false);
-                                    explain_memoize                                    
----------------------------------------------------------------------------------------
- Aggregate (actual rows=1 loops=N)
-   ->  Nested Loop (actual rows=1000 loops=N)
-         ->  Seq Scan on tenk1 t1 (actual rows=1000 loops=N)
-               Filter: (unique1 < 1000)
-               Rows Removed by Filter: 9000
-         ->  Memoize (actual rows=1 loops=N)
-               Cache Key: t1.two, t1.twenty
-               Cache Mode: binary
-               Hits: 980  Misses: 20  Evictions: Zero  Overflows: 0  Memory Usage: NkB
-               ->  Seq Scan on tenk1 t2 (actual rows=1 loops=N)
-                     Filter: ((t1.twenty = unique1) AND (t1.two = two))
-                     Rows Removed by Filter: 9999
-(12 rows)
-
--- And check we get the expected results.
-SELECT COUNT(*), AVG(t1.twenty) FROM tenk1 t1 LEFT JOIN
-LATERAL (SELECT t1.twenty AS c1, t2.unique1 AS c2, t2.two FROM tenk1 t2) s
-ON t1.two = s.two
-WHERE s.c1 = s.c2 AND t1.unique1 < 1000;
- count |        avg         
--------+--------------------
-  1000 | 9.5000000000000000
-(1 row)
-
-SET enable_mergejoin TO off;
--- Test for varlena datatype with expr evaluation
-CREATE TABLE expr_key (x numeric, t text);
-INSERT INTO expr_key (x, t)
-SELECT d1::numeric, d1::text FROM (
-    SELECT round((d / pi())::numeric, 7) AS d1 FROM generate_series(1, 20) AS d
-) t;
--- duplicate rows so we get some cache hits
-INSERT INTO expr_key SELECT * FROM expr_key;
-CREATE INDEX expr_key_idx_x_t ON expr_key (x, t);
-VACUUM ANALYZE expr_key;
--- Ensure we get we get a cache miss and hit for each of the 20 distinct values
-SELECT explain_memoize('
-SELECT * FROM expr_key t1 INNER JOIN expr_key t2
-ON t1.x = t2.t::numeric AND t1.t::numeric = t2.x;', false);
-                                      explain_memoize                                      
--------------------------------------------------------------------------------------------
- Nested Loop (actual rows=80 loops=N)
-   ->  Seq Scan on expr_key t1 (actual rows=40 loops=N)
-   ->  Memoize (actual rows=2 loops=N)
-         Cache Key: t1.x, (t1.t)::numeric
-         Cache Mode: logical
-         Hits: 20  Misses: 20  Evictions: Zero  Overflows: 0  Memory Usage: NkB
-         ->  Index Only Scan using expr_key_idx_x_t on expr_key t2 (actual rows=2 loops=N)
-               Index Cond: (x = (t1.t)::numeric)
-               Filter: (t1.x = (t)::numeric)
-               Heap Fetches: N
-(10 rows)
-
-DROP TABLE expr_key;
--- Reduce work_mem and hash_mem_multiplier so that we see some cache evictions
-SET work_mem TO '64kB';
-SET hash_mem_multiplier TO 1.0;
--- Ensure we get some evictions.  We're unable to validate the hits and misses
--- here as the number of entries that fit in the cache at once will vary
--- between different machines.
-SELECT explain_memoize('
-SELECT COUNT(*),AVG(t1.unique1) FROM tenk1 t1
-INNER JOIN tenk1 t2 ON t1.unique1 = t2.thousand
-WHERE t2.unique1 < 1200;', true);
-                                      explain_memoize                                      
--------------------------------------------------------------------------------------------
- Aggregate (actual rows=1 loops=N)
-   ->  Nested Loop (actual rows=1200 loops=N)
-         ->  Seq Scan on tenk1 t2 (actual rows=1200 loops=N)
-               Filter: (unique1 < 1200)
-               Rows Removed by Filter: 8800
-         ->  Memoize (actual rows=1 loops=N)
-               Cache Key: t2.thousand
-               Cache Mode: logical
-               Hits: N  Misses: N  Evictions: N  Overflows: 0  Memory Usage: NkB
-               ->  Index Only Scan using tenk1_unique1 on tenk1 t1 (actual rows=1 loops=N)
-                     Index Cond: (unique1 = t2.thousand)
-                     Heap Fetches: N
-(12 rows)
-
-CREATE TABLE flt (f float);
-CREATE INDEX flt_f_idx ON flt (f);
-INSERT INTO flt VALUES('-0.0'::float),('+0.0'::float);
-ANALYZE flt;
-SET enable_seqscan TO off;
--- Ensure memoize operates in logical mode
-SELECT explain_memoize('
-SELECT * FROM flt f1 INNER JOIN flt f2 ON f1.f = f2.f;', false);
-                                explain_memoize                                
--------------------------------------------------------------------------------
- Nested Loop (actual rows=4 loops=N)
-   ->  Index Only Scan using flt_f_idx on flt f1 (actual rows=2 loops=N)
-         Heap Fetches: N
-   ->  Memoize (actual rows=2 loops=N)
-         Cache Key: f1.f
-         Cache Mode: logical
-         Hits: 1  Misses: 1  Evictions: Zero  Overflows: 0  Memory Usage: NkB
-         ->  Index Only Scan using flt_f_idx on flt f2 (actual rows=2 loops=N)
-               Index Cond: (f = f1.f)
-               Heap Fetches: N
-(10 rows)
-
--- Ensure memoize operates in binary mode
-SELECT explain_memoize('
-SELECT * FROM flt f1 INNER JOIN flt f2 ON f1.f >= f2.f;', false);
-                                explain_memoize                                
--------------------------------------------------------------------------------
- Nested Loop (actual rows=4 loops=N)
-   ->  Index Only Scan using flt_f_idx on flt f1 (actual rows=2 loops=N)
-         Heap Fetches: N
-   ->  Memoize (actual rows=2 loops=N)
-         Cache Key: f1.f
-         Cache Mode: binary
-         Hits: 0  Misses: 2  Evictions: Zero  Overflows: 0  Memory Usage: NkB
-         ->  Index Only Scan using flt_f_idx on flt f2 (actual rows=2 loops=N)
-               Index Cond: (f <= f1.f)
-               Heap Fetches: N
-(10 rows)
-
-DROP TABLE flt;
--- Exercise Memoize in binary mode with a large fixed width type and a
--- varlena type.
-CREATE TABLE strtest (n name, t text);
-CREATE INDEX strtest_n_idx ON strtest (n);
-CREATE INDEX strtest_t_idx ON strtest (t);
-INSERT INTO strtest VALUES('one','one'),('two','two'),('three',repeat(fipshash('three'),100));
--- duplicate rows so we get some cache hits
-INSERT INTO strtest SELECT * FROM strtest;
-ANALYZE strtest;
--- Ensure we get 3 hits and 3 misses
-SELECT explain_memoize('
-SELECT * FROM strtest s1 INNER JOIN strtest s2 ON s1.n >= s2.n;', false);
-                                 explain_memoize                                  
-----------------------------------------------------------------------------------
- Nested Loop (actual rows=24 loops=N)
-   Disabled Nodes: 1
-   ->  Seq Scan on strtest s1 (actual rows=6 loops=N)
-         Disabled Nodes: 1
-   ->  Memoize (actual rows=4 loops=N)
-         Cache Key: s1.n
-         Cache Mode: binary
-         Hits: 3  Misses: 3  Evictions: Zero  Overflows: 0  Memory Usage: NkB
-         ->  Index Scan using strtest_n_idx on strtest s2 (actual rows=4 loops=N)
-               Index Cond: (n <= s1.n)
-(10 rows)
-
--- Ensure we get 3 hits and 3 misses
-SELECT explain_memoize('
-SELECT * FROM strtest s1 INNER JOIN strtest s2 ON s1.t >= s2.t;', false);
-                                 explain_memoize                                  
-----------------------------------------------------------------------------------
- Nested Loop (actual rows=24 loops=N)
-   Disabled Nodes: 1
-   ->  Seq Scan on strtest s1 (actual rows=6 loops=N)
-         Disabled Nodes: 1
-   ->  Memoize (actual rows=4 loops=N)
-         Cache Key: s1.t
-         Cache Mode: binary
-         Hits: 3  Misses: 3  Evictions: Zero  Overflows: 0  Memory Usage: NkB
-         ->  Index Scan using strtest_t_idx on strtest s2 (actual rows=4 loops=N)
-               Index Cond: (t <= s1.t)
-(10 rows)
-
-DROP TABLE strtest;
--- Ensure memoize works with partitionwise join
-SET enable_partitionwise_join TO on;
-CREATE TABLE prt (a int) PARTITION BY RANGE(a);
-CREATE TABLE prt_p1 PARTITION OF prt FOR VALUES FROM (0) TO (10);
-CREATE TABLE prt_p2 PARTITION OF prt FOR VALUES FROM (10) TO (20);
-INSERT INTO prt VALUES (0), (0), (0), (0);
-INSERT INTO prt VALUES (10), (10), (10), (10);
-CREATE INDEX iprt_p1_a ON prt_p1 (a);
-CREATE INDEX iprt_p2_a ON prt_p2 (a);
-ANALYZE prt;
-SELECT explain_memoize('
-SELECT * FROM prt t1 INNER JOIN prt t2 ON t1.a = t2.a;', false);
-                                     explain_memoize                                      
-------------------------------------------------------------------------------------------
- Append (actual rows=32 loops=N)
-   ->  Nested Loop (actual rows=16 loops=N)
-         ->  Index Only Scan using iprt_p1_a on prt_p1 t1_1 (actual rows=4 loops=N)
-               Heap Fetches: N
-         ->  Memoize (actual rows=4 loops=N)
-               Cache Key: t1_1.a
-               Cache Mode: logical
-               Hits: 3  Misses: 1  Evictions: Zero  Overflows: 0  Memory Usage: NkB
-               ->  Index Only Scan using iprt_p1_a on prt_p1 t2_1 (actual rows=4 loops=N)
-                     Index Cond: (a = t1_1.a)
-                     Heap Fetches: N
-   ->  Nested Loop (actual rows=16 loops=N)
-         ->  Index Only Scan using iprt_p2_a on prt_p2 t1_2 (actual rows=4 loops=N)
-               Heap Fetches: N
-         ->  Memoize (actual rows=4 loops=N)
-               Cache Key: t1_2.a
-               Cache Mode: logical
-               Hits: 3  Misses: 1  Evictions: Zero  Overflows: 0  Memory Usage: NkB
-               ->  Index Only Scan using iprt_p2_a on prt_p2 t2_2 (actual rows=4 loops=N)
-                     Index Cond: (a = t1_2.a)
-                     Heap Fetches: N
-(21 rows)
-
--- Ensure memoize works with parameterized union-all Append path
-SET enable_partitionwise_join TO off;
-SELECT explain_memoize('
-SELECT * FROM prt_p1 t1 INNER JOIN
-(SELECT * FROM prt_p1 UNION ALL SELECT * FROM prt_p2) t2
-ON t1.a = t2.a;', false);
-                                   explain_memoize                                   
--------------------------------------------------------------------------------------
- Nested Loop (actual rows=16 loops=N)
-   ->  Index Only Scan using iprt_p1_a on prt_p1 t1 (actual rows=4 loops=N)
-         Heap Fetches: N
-   ->  Memoize (actual rows=4 loops=N)
-         Cache Key: t1.a
-         Cache Mode: logical
-         Hits: 3  Misses: 1  Evictions: Zero  Overflows: 0  Memory Usage: NkB
-         ->  Append (actual rows=4 loops=N)
-               ->  Index Only Scan using iprt_p1_a on prt_p1 (actual rows=4 loops=N)
-                     Index Cond: (a = t1.a)
-                     Heap Fetches: N
-               ->  Index Only Scan using iprt_p2_a on prt_p2 (actual rows=0 loops=N)
-                     Index Cond: (a = t1.a)
-                     Heap Fetches: N
-(14 rows)
-
-DROP TABLE prt;
-RESET enable_partitionwise_join;
--- Exercise Memoize code that flushes the cache when a parameter changes which
--- is not part of the cache key.
--- Ensure we get a Memoize plan
-EXPLAIN (COSTS OFF)
-SELECT unique1 FROM tenk1 t0
-WHERE unique1 < 3
-  AND EXISTS (
-	SELECT 1 FROM tenk1 t1
-	INNER JOIN tenk1 t2 ON t1.unique1 = t2.hundred
-	WHERE t0.ten = t1.twenty AND t0.two <> t2.four OFFSET 0);
-                           QUERY PLAN                           
-----------------------------------------------------------------
- Index Scan using tenk1_unique1 on tenk1 t0
-   Index Cond: (unique1 < 3)
-   Filter: EXISTS(SubPlan 1)
-   SubPlan 1
-     ->  Nested Loop
-           ->  Index Scan using tenk1_hundred on tenk1 t2
-                 Filter: (t0.two <> four)
-           ->  Memoize
-                 Cache Key: t2.hundred
-                 Cache Mode: logical
-                 ->  Index Scan using tenk1_unique1 on tenk1 t1
-                       Index Cond: (unique1 = t2.hundred)
-                       Filter: (t0.ten = twenty)
-(13 rows)
-
--- Ensure the above query returns the correct result
-SELECT unique1 FROM tenk1 t0
-WHERE unique1 < 3
-  AND EXISTS (
-	SELECT 1 FROM tenk1 t1
-	INNER JOIN tenk1 t2 ON t1.unique1 = t2.hundred
-	WHERE t0.ten = t1.twenty AND t0.two <> t2.four OFFSET 0);
- unique1 
----------
-       2
-(1 row)
-
-RESET enable_seqscan;
-RESET enable_mergejoin;
-RESET work_mem;
-RESET hash_mem_multiplier;
-RESET enable_bitmapscan;
-RESET enable_hashjoin;
--- Test parallel plans with Memoize
-SET min_parallel_table_scan_size TO 0;
-SET parallel_setup_cost TO 0;
-SET parallel_tuple_cost TO 0;
-SET max_parallel_workers_per_gather TO 2;
--- Ensure we get a parallel plan.
-EXPLAIN (COSTS OFF)
-SELECT COUNT(*),AVG(t2.unique1) FROM tenk1 t1,
-LATERAL (SELECT t2.unique1 FROM tenk1 t2 WHERE t1.twenty = t2.unique1) t2
-WHERE t1.unique1 < 1000;
-                                  QUERY PLAN                                   
--------------------------------------------------------------------------------
- Finalize Aggregate
-   ->  Gather
-         Workers Planned: 2
-         ->  Partial Aggregate
-               ->  Nested Loop
-                     ->  Parallel Bitmap Heap Scan on tenk1 t1
-                           Recheck Cond: (unique1 < 1000)
-                           ->  Bitmap Index Scan on tenk1_unique1
-                                 Index Cond: (unique1 < 1000)
-                     ->  Memoize
-                           Cache Key: t1.twenty
-                           Cache Mode: logical
-                           ->  Index Only Scan using tenk1_unique1 on tenk1 t2
-                                 Index Cond: (unique1 = t1.twenty)
-(14 rows)
-
--- And ensure the parallel plan gives us the correct results.
-SELECT COUNT(*),AVG(t2.unique1) FROM tenk1 t1,
-LATERAL (SELECT t2.unique1 FROM tenk1 t2 WHERE t1.twenty = t2.unique1) t2
-WHERE t1.unique1 < 1000;
- count |        avg         
--------+--------------------
-  1000 | 9.5000000000000000
-(1 row)
-
-RESET max_parallel_workers_per_gather;
-RESET parallel_tuple_cost;
-RESET parallel_setup_cost;
-RESET min_parallel_table_scan_size;
+psql: error: connection to server on socket "/tmp/f_SDOOqtof/.s.PGSQL.16412" failed: No such file or directory
+	Is the server running locally and accepting connections on that socket?
diff -U3 /tmp/cirrus-ci-build/src/test/regress/expected/stats.out /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/stats.out
--- /tmp/cirrus-ci-build/src/test/regress/expected/stats.out	2024-09-20 04:07:19.078862335 +0000
+++ /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/stats.out	2024-09-20 04:17:09.153564728 +0000
@@ -1,1649 +1,2 @@
---
--- Test cumulative stats system
---
--- Must be run after tenk2 has been created (by create_table),
--- populated (by create_misc) and indexed (by create_index).
---
--- conditio sine qua non
-SHOW track_counts;  -- must be on
- track_counts 
---------------
- on
-(1 row)
-
--- ensure that both seqscan and indexscan plans are allowed
-SET enable_seqscan TO on;
-SET enable_indexscan TO on;
--- for the moment, we don't want index-only scans here
-SET enable_indexonlyscan TO off;
--- not enabled by default, but we want to test it...
-SET track_functions TO 'all';
--- record dboid for later use
-SELECT oid AS dboid from pg_database where datname = current_database() \gset
--- save counters
-BEGIN;
-SET LOCAL stats_fetch_consistency = snapshot;
-CREATE TABLE prevstats AS
-SELECT t.seq_scan, t.seq_tup_read, t.idx_scan, t.idx_tup_fetch,
-       (b.heap_blks_read + b.heap_blks_hit) AS heap_blks,
-       (b.idx_blks_read + b.idx_blks_hit) AS idx_blks,
-       pg_stat_get_snapshot_timestamp() as snap_ts
-  FROM pg_catalog.pg_stat_user_tables AS t,
-       pg_catalog.pg_statio_user_tables AS b
- WHERE t.relname='tenk2' AND b.relname='tenk2';
-COMMIT;
--- test effects of TRUNCATE on n_live_tup/n_dead_tup counters
-CREATE TABLE trunc_stats_test(id serial);
-CREATE TABLE trunc_stats_test1(id serial, stuff text);
-CREATE TABLE trunc_stats_test2(id serial);
-CREATE TABLE trunc_stats_test3(id serial, stuff text);
-CREATE TABLE trunc_stats_test4(id serial);
--- check that n_live_tup is reset to 0 after truncate
-INSERT INTO trunc_stats_test DEFAULT VALUES;
-INSERT INTO trunc_stats_test DEFAULT VALUES;
-INSERT INTO trunc_stats_test DEFAULT VALUES;
-TRUNCATE trunc_stats_test;
--- test involving a truncate in a transaction; 4 ins but only 1 live
-INSERT INTO trunc_stats_test1 DEFAULT VALUES;
-INSERT INTO trunc_stats_test1 DEFAULT VALUES;
-INSERT INTO trunc_stats_test1 DEFAULT VALUES;
-UPDATE trunc_stats_test1 SET id = id + 10 WHERE id IN (1, 2);
-DELETE FROM trunc_stats_test1 WHERE id = 3;
-BEGIN;
-UPDATE trunc_stats_test1 SET id = id + 100;
-TRUNCATE trunc_stats_test1;
-INSERT INTO trunc_stats_test1 DEFAULT VALUES;
-COMMIT;
--- use a savepoint: 1 insert, 1 live
-BEGIN;
-INSERT INTO trunc_stats_test2 DEFAULT VALUES;
-INSERT INTO trunc_stats_test2 DEFAULT VALUES;
-SAVEPOINT p1;
-INSERT INTO trunc_stats_test2 DEFAULT VALUES;
-TRUNCATE trunc_stats_test2;
-INSERT INTO trunc_stats_test2 DEFAULT VALUES;
-RELEASE SAVEPOINT p1;
-COMMIT;
--- rollback a savepoint: this should count 4 inserts and have 2
--- live tuples after commit (and 2 dead ones due to aborted subxact)
-BEGIN;
-INSERT INTO trunc_stats_test3 DEFAULT VALUES;
-INSERT INTO trunc_stats_test3 DEFAULT VALUES;
-SAVEPOINT p1;
-INSERT INTO trunc_stats_test3 DEFAULT VALUES;
-INSERT INTO trunc_stats_test3 DEFAULT VALUES;
-TRUNCATE trunc_stats_test3;
-INSERT INTO trunc_stats_test3 DEFAULT VALUES;
-ROLLBACK TO SAVEPOINT p1;
-COMMIT;
--- rollback a truncate: this should count 2 inserts and produce 2 dead tuples
-BEGIN;
-INSERT INTO trunc_stats_test4 DEFAULT VALUES;
-INSERT INTO trunc_stats_test4 DEFAULT VALUES;
-TRUNCATE trunc_stats_test4;
-INSERT INTO trunc_stats_test4 DEFAULT VALUES;
-ROLLBACK;
--- do a seqscan
-SELECT count(*) FROM tenk2;
- count 
--------
- 10000
-(1 row)
-
--- do an indexscan
--- make sure it is not a bitmap scan, which might skip fetching heap tuples
-SET enable_bitmapscan TO off;
-SELECT count(*) FROM tenk2 WHERE unique1 = 1;
- count 
--------
-     1
-(1 row)
-
-RESET enable_bitmapscan;
--- ensure pending stats are flushed
-SELECT pg_stat_force_next_flush();
- pg_stat_force_next_flush 
---------------------------
- 
-(1 row)
-
--- check effects
-BEGIN;
-SET LOCAL stats_fetch_consistency = snapshot;
-SELECT relname, n_tup_ins, n_tup_upd, n_tup_del, n_live_tup, n_dead_tup
-  FROM pg_stat_user_tables
- WHERE relname like 'trunc_stats_test%' order by relname;
-      relname      | n_tup_ins | n_tup_upd | n_tup_del | n_live_tup | n_dead_tup 
--------------------+-----------+-----------+-----------+------------+------------
- trunc_stats_test  |         3 |         0 |         0 |          0 |          0
- trunc_stats_test1 |         4 |         2 |         1 |          1 |          0
- trunc_stats_test2 |         1 |         0 |         0 |          1 |          0
- trunc_stats_test3 |         4 |         0 |         0 |          2 |          2
- trunc_stats_test4 |         2 |         0 |         0 |          0 |          2
-(5 rows)
-
-SELECT st.seq_scan >= pr.seq_scan + 1,
-       st.seq_tup_read >= pr.seq_tup_read + cl.reltuples,
-       st.idx_scan >= pr.idx_scan + 1,
-       st.idx_tup_fetch >= pr.idx_tup_fetch + 1
-  FROM pg_stat_user_tables AS st, pg_class AS cl, prevstats AS pr
- WHERE st.relname='tenk2' AND cl.relname='tenk2';
- ?column? | ?column? | ?column? | ?column? 
-----------+----------+----------+----------
- t        | t        | t        | t
-(1 row)
-
-SELECT st.heap_blks_read + st.heap_blks_hit >= pr.heap_blks + cl.relpages,
-       st.idx_blks_read + st.idx_blks_hit >= pr.idx_blks + 1
-  FROM pg_statio_user_tables AS st, pg_class AS cl, prevstats AS pr
- WHERE st.relname='tenk2' AND cl.relname='tenk2';
- ?column? | ?column? 
-----------+----------
- t        | t
-(1 row)
-
-SELECT pr.snap_ts < pg_stat_get_snapshot_timestamp() as snapshot_newer
-FROM prevstats AS pr;
- snapshot_newer 
-----------------
- t
-(1 row)
-
-COMMIT;
-----
--- Basic tests for track_functions
----
-CREATE FUNCTION stats_test_func1() RETURNS VOID LANGUAGE plpgsql AS $$BEGIN END;$$;
-SELECT 'stats_test_func1()'::regprocedure::oid AS stats_test_func1_oid \gset
-CREATE FUNCTION stats_test_func2() RETURNS VOID LANGUAGE plpgsql AS $$BEGIN END;$$;
-SELECT 'stats_test_func2()'::regprocedure::oid AS stats_test_func2_oid \gset
--- test that stats are accumulated
-BEGIN;
-SET LOCAL stats_fetch_consistency = none;
-SELECT pg_stat_get_function_calls(:stats_test_func1_oid);
- pg_stat_get_function_calls 
-----------------------------
-                           
-(1 row)
-
-SELECT pg_stat_get_xact_function_calls(:stats_test_func1_oid);
- pg_stat_get_xact_function_calls 
----------------------------------
-                                
-(1 row)
-
-SELECT stats_test_func1();
- stats_test_func1 
-------------------
- 
-(1 row)
-
-SELECT pg_stat_get_xact_function_calls(:stats_test_func1_oid);
- pg_stat_get_xact_function_calls 
----------------------------------
-                               1
-(1 row)
-
-SELECT stats_test_func1();
- stats_test_func1 
-------------------
- 
-(1 row)
-
-SELECT pg_stat_get_xact_function_calls(:stats_test_func1_oid);
- pg_stat_get_xact_function_calls 
----------------------------------
-                               2
-(1 row)
-
-SELECT pg_stat_get_function_calls(:stats_test_func1_oid);
- pg_stat_get_function_calls 
-----------------------------
-                          0
-(1 row)
-
-COMMIT;
--- Verify that function stats are not transactional
--- rolled back savepoint in committing transaction
-BEGIN;
-SELECT stats_test_func2();
- stats_test_func2 
-------------------
- 
-(1 row)
-
-SAVEPOINT foo;
-SELECT stats_test_func2();
- stats_test_func2 
-------------------
- 
-(1 row)
-
-ROLLBACK TO SAVEPOINT foo;
-SELECT pg_stat_get_xact_function_calls(:stats_test_func2_oid);
- pg_stat_get_xact_function_calls 
----------------------------------
-                               2
-(1 row)
-
-SELECT stats_test_func2();
- stats_test_func2 
-------------------
- 
-(1 row)
-
-COMMIT;
--- rolled back transaction
-BEGIN;
-SELECT stats_test_func2();
- stats_test_func2 
-------------------
- 
-(1 row)
-
-ROLLBACK;
-SELECT pg_stat_force_next_flush();
- pg_stat_force_next_flush 
---------------------------
- 
-(1 row)
-
--- check collected stats
-SELECT funcname, calls FROM pg_stat_user_functions WHERE funcid = :stats_test_func1_oid;
-     funcname     | calls 
-------------------+-------
- stats_test_func1 |     2
-(1 row)
-
-SELECT funcname, calls FROM pg_stat_user_functions WHERE funcid = :stats_test_func2_oid;
-     funcname     | calls 
-------------------+-------
- stats_test_func2 |     4
-(1 row)
-
--- check that a rolled back drop function stats leaves stats alive
-BEGIN;
-SELECT funcname, calls FROM pg_stat_user_functions WHERE funcid = :stats_test_func1_oid;
-     funcname     | calls 
-------------------+-------
- stats_test_func1 |     2
-(1 row)
-
-DROP FUNCTION stats_test_func1();
--- shouldn't be visible via view
-SELECT funcname, calls FROM pg_stat_user_functions WHERE funcid = :stats_test_func1_oid;
- funcname | calls 
-----------+-------
-(0 rows)
-
--- but still via oid access
-SELECT pg_stat_get_function_calls(:stats_test_func1_oid);
- pg_stat_get_function_calls 
-----------------------------
-                          2
-(1 row)
-
-ROLLBACK;
-SELECT funcname, calls FROM pg_stat_user_functions WHERE funcid = :stats_test_func1_oid;
-     funcname     | calls 
-------------------+-------
- stats_test_func1 |     2
-(1 row)
-
-SELECT pg_stat_get_function_calls(:stats_test_func1_oid);
- pg_stat_get_function_calls 
-----------------------------
-                          2
-(1 row)
-
--- check that function dropped in main transaction leaves no stats behind
-BEGIN;
-DROP FUNCTION stats_test_func1();
-COMMIT;
-SELECT funcname, calls FROM pg_stat_user_functions WHERE funcid = :stats_test_func1_oid;
- funcname | calls 
-----------+-------
-(0 rows)
-
-SELECT pg_stat_get_function_calls(:stats_test_func1_oid);
- pg_stat_get_function_calls 
-----------------------------
-                           
-(1 row)
-
--- check that function dropped in a subtransaction leaves no stats behind
-BEGIN;
-SELECT stats_test_func2();
- stats_test_func2 
-------------------
- 
-(1 row)
-
-SAVEPOINT a;
-SELECT stats_test_func2();
- stats_test_func2 
-------------------
- 
-(1 row)
-
-SAVEPOINT b;
-DROP FUNCTION stats_test_func2();
-COMMIT;
-SELECT funcname, calls FROM pg_stat_user_functions WHERE funcid = :stats_test_func2_oid;
- funcname | calls 
-----------+-------
-(0 rows)
-
-SELECT pg_stat_get_function_calls(:stats_test_func2_oid);
- pg_stat_get_function_calls 
-----------------------------
-                           
-(1 row)
-
--- Check that stats for relations are dropped. For that we need to access stats
--- by oid after the DROP TABLE. Save oids.
-CREATE TABLE drop_stats_test();
-INSERT INTO drop_stats_test DEFAULT VALUES;
-SELECT 'drop_stats_test'::regclass::oid AS drop_stats_test_oid \gset
-CREATE TABLE drop_stats_test_xact();
-INSERT INTO drop_stats_test_xact DEFAULT VALUES;
-SELECT 'drop_stats_test_xact'::regclass::oid AS drop_stats_test_xact_oid \gset
-CREATE TABLE drop_stats_test_subxact();
-INSERT INTO drop_stats_test_subxact DEFAULT VALUES;
-SELECT 'drop_stats_test_subxact'::regclass::oid AS drop_stats_test_subxact_oid \gset
-SELECT pg_stat_force_next_flush();
- pg_stat_force_next_flush 
---------------------------
- 
-(1 row)
-
-SELECT pg_stat_get_live_tuples(:drop_stats_test_oid);
- pg_stat_get_live_tuples 
--------------------------
-                       1
-(1 row)
-
-DROP TABLE drop_stats_test;
-SELECT pg_stat_get_live_tuples(:drop_stats_test_oid);
- pg_stat_get_live_tuples 
--------------------------
-                       0
-(1 row)
-
-SELECT pg_stat_get_xact_tuples_inserted(:drop_stats_test_oid);
- pg_stat_get_xact_tuples_inserted 
-----------------------------------
-                                0
-(1 row)
-
--- check that rollback protects against having stats dropped and that local
--- modifications don't pose a problem
-SELECT pg_stat_get_live_tuples(:drop_stats_test_xact_oid);
- pg_stat_get_live_tuples 
--------------------------
-                       1
-(1 row)
-
-SELECT pg_stat_get_tuples_inserted(:drop_stats_test_xact_oid);
- pg_stat_get_tuples_inserted 
------------------------------
-                           1
-(1 row)
-
-SELECT pg_stat_get_xact_tuples_inserted(:drop_stats_test_xact_oid);
- pg_stat_get_xact_tuples_inserted 
-----------------------------------
-                                0
-(1 row)
-
-BEGIN;
-INSERT INTO drop_stats_test_xact DEFAULT VALUES;
-SELECT pg_stat_get_xact_tuples_inserted(:drop_stats_test_xact_oid);
- pg_stat_get_xact_tuples_inserted 
-----------------------------------
-                                1
-(1 row)
-
-DROP TABLE drop_stats_test_xact;
-SELECT pg_stat_get_xact_tuples_inserted(:drop_stats_test_xact_oid);
- pg_stat_get_xact_tuples_inserted 
-----------------------------------
-                                0
-(1 row)
-
-ROLLBACK;
-SELECT pg_stat_force_next_flush();
- pg_stat_force_next_flush 
---------------------------
- 
-(1 row)
-
-SELECT pg_stat_get_live_tuples(:drop_stats_test_xact_oid);
- pg_stat_get_live_tuples 
--------------------------
-                       1
-(1 row)
-
-SELECT pg_stat_get_tuples_inserted(:drop_stats_test_xact_oid);
- pg_stat_get_tuples_inserted 
------------------------------
-                           2
-(1 row)
-
--- transactional drop
-SELECT pg_stat_get_live_tuples(:drop_stats_test_xact_oid);
- pg_stat_get_live_tuples 
--------------------------
-                       1
-(1 row)
-
-SELECT pg_stat_get_tuples_inserted(:drop_stats_test_xact_oid);
- pg_stat_get_tuples_inserted 
------------------------------
-                           2
-(1 row)
-
-BEGIN;
-INSERT INTO drop_stats_test_xact DEFAULT VALUES;
-SELECT pg_stat_get_xact_tuples_inserted(:drop_stats_test_xact_oid);
- pg_stat_get_xact_tuples_inserted 
-----------------------------------
-                                1
-(1 row)
-
-DROP TABLE drop_stats_test_xact;
-SELECT pg_stat_get_xact_tuples_inserted(:drop_stats_test_xact_oid);
- pg_stat_get_xact_tuples_inserted 
-----------------------------------
-                                0
-(1 row)
-
-COMMIT;
-SELECT pg_stat_force_next_flush();
- pg_stat_force_next_flush 
---------------------------
- 
-(1 row)
-
-SELECT pg_stat_get_live_tuples(:drop_stats_test_xact_oid);
- pg_stat_get_live_tuples 
--------------------------
-                       0
-(1 row)
-
-SELECT pg_stat_get_tuples_inserted(:drop_stats_test_xact_oid);
- pg_stat_get_tuples_inserted 
------------------------------
-                           0
-(1 row)
-
--- savepoint rollback (2 levels)
-SELECT pg_stat_get_live_tuples(:drop_stats_test_subxact_oid);
- pg_stat_get_live_tuples 
--------------------------
-                       1
-(1 row)
-
-BEGIN;
-INSERT INTO drop_stats_test_subxact DEFAULT VALUES;
-SAVEPOINT sp1;
-INSERT INTO drop_stats_test_subxact DEFAULT VALUES;
-SELECT pg_stat_get_xact_tuples_inserted(:drop_stats_test_subxact_oid);
- pg_stat_get_xact_tuples_inserted 
-----------------------------------
-                                2
-(1 row)
-
-SAVEPOINT sp2;
-DROP TABLE drop_stats_test_subxact;
-ROLLBACK TO SAVEPOINT sp2;
-SELECT pg_stat_get_xact_tuples_inserted(:drop_stats_test_subxact_oid);
- pg_stat_get_xact_tuples_inserted 
-----------------------------------
-                                2
-(1 row)
-
-COMMIT;
-SELECT pg_stat_force_next_flush();
- pg_stat_force_next_flush 
---------------------------
- 
-(1 row)
-
-SELECT pg_stat_get_live_tuples(:drop_stats_test_subxact_oid);
- pg_stat_get_live_tuples 
--------------------------
-                       3
-(1 row)
-
--- savepoint rolback (1 level)
-SELECT pg_stat_get_live_tuples(:drop_stats_test_subxact_oid);
- pg_stat_get_live_tuples 
--------------------------
-                       3
-(1 row)
-
-BEGIN;
-SAVEPOINT sp1;
-DROP TABLE drop_stats_test_subxact;
-SAVEPOINT sp2;
-ROLLBACK TO SAVEPOINT sp1;
-COMMIT;
-SELECT pg_stat_get_live_tuples(:drop_stats_test_subxact_oid);
- pg_stat_get_live_tuples 
--------------------------
-                       3
-(1 row)
-
--- and now actually drop
-SELECT pg_stat_get_live_tuples(:drop_stats_test_subxact_oid);
- pg_stat_get_live_tuples 
--------------------------
-                       3
-(1 row)
-
-BEGIN;
-SAVEPOINT sp1;
-DROP TABLE drop_stats_test_subxact;
-SAVEPOINT sp2;
-RELEASE SAVEPOINT sp1;
-COMMIT;
-SELECT pg_stat_get_live_tuples(:drop_stats_test_subxact_oid);
- pg_stat_get_live_tuples 
--------------------------
-                       0
-(1 row)
-
-DROP TABLE trunc_stats_test, trunc_stats_test1, trunc_stats_test2, trunc_stats_test3, trunc_stats_test4;
-DROP TABLE prevstats;
------
--- Test that last_seq_scan, last_idx_scan are correctly maintained
---
--- Perform test using a temporary table. That way autovacuum etc won't
--- interfere. To be able to check that timestamps increase, we sleep for 100ms
--- between tests, assuming that there aren't systems with a coarser timestamp
--- granularity.
------
-BEGIN;
-CREATE TEMPORARY TABLE test_last_scan(idx_col int primary key, noidx_col int);
-INSERT INTO test_last_scan(idx_col, noidx_col) VALUES(1, 1);
-SELECT pg_stat_force_next_flush();
- pg_stat_force_next_flush 
---------------------------
- 
-(1 row)
-
-SELECT last_seq_scan, last_idx_scan FROM pg_stat_all_tables WHERE relid = 'test_last_scan'::regclass;
- last_seq_scan | last_idx_scan 
----------------+---------------
-               | 
-(1 row)
-
-COMMIT;
-SELECT pg_stat_reset_single_table_counters('test_last_scan'::regclass);
- pg_stat_reset_single_table_counters 
--------------------------------------
- 
-(1 row)
-
-SELECT seq_scan, idx_scan FROM pg_stat_all_tables WHERE relid = 'test_last_scan'::regclass;
- seq_scan | idx_scan 
-----------+----------
-        0 |        0
-(1 row)
-
--- ensure we start out with exactly one index and sequential scan
-BEGIN;
-SET LOCAL enable_seqscan TO on;
-SET LOCAL enable_indexscan TO on;
-SET LOCAL enable_bitmapscan TO off;
-EXPLAIN (COSTS off) SELECT count(*) FROM test_last_scan WHERE noidx_col = 1;
-            QUERY PLAN            
-----------------------------------
- Aggregate
-   ->  Seq Scan on test_last_scan
-         Filter: (noidx_col = 1)
-(3 rows)
-
-SELECT count(*) FROM test_last_scan WHERE noidx_col = 1;
- count 
--------
-     1
-(1 row)
-
-SET LOCAL enable_seqscan TO off;
-EXPLAIN (COSTS off) SELECT count(*) FROM test_last_scan WHERE idx_col = 1;
-                          QUERY PLAN                          
---------------------------------------------------------------
- Aggregate
-   ->  Index Scan using test_last_scan_pkey on test_last_scan
-         Index Cond: (idx_col = 1)
-(3 rows)
-
-SELECT count(*) FROM test_last_scan WHERE idx_col = 1;
- count 
--------
-     1
-(1 row)
-
-SELECT pg_stat_force_next_flush();
- pg_stat_force_next_flush 
---------------------------
- 
-(1 row)
-
-COMMIT;
--- fetch timestamps from before the next test
-SELECT last_seq_scan AS test_last_seq, last_idx_scan AS test_last_idx
-FROM pg_stat_all_tables WHERE relid = 'test_last_scan'::regclass \gset
-SELECT pg_sleep(0.1); -- assume a minimum timestamp granularity of 100ms
- pg_sleep 
-----------
- 
-(1 row)
-
--- cause one sequential scan
-BEGIN;
-SET LOCAL enable_seqscan TO on;
-SET LOCAL enable_indexscan TO off;
-SET LOCAL enable_bitmapscan TO off;
-EXPLAIN (COSTS off) SELECT count(*) FROM test_last_scan WHERE noidx_col = 1;
-            QUERY PLAN            
-----------------------------------
- Aggregate
-   ->  Seq Scan on test_last_scan
-         Filter: (noidx_col = 1)
-(3 rows)
-
-SELECT count(*) FROM test_last_scan WHERE noidx_col = 1;
- count 
--------
-     1
-(1 row)
-
-SELECT pg_stat_force_next_flush();
- pg_stat_force_next_flush 
---------------------------
- 
-(1 row)
-
-COMMIT;
--- check that just sequential scan stats were incremented
-SELECT seq_scan, :'test_last_seq' < last_seq_scan AS seq_ok, idx_scan, :'test_last_idx' = last_idx_scan AS idx_ok
-FROM pg_stat_all_tables WHERE relid = 'test_last_scan'::regclass;
- seq_scan | seq_ok | idx_scan | idx_ok 
-----------+--------+----------+--------
-        2 | t      |        1 | t
-(1 row)
-
--- fetch timestamps from before the next test
-SELECT last_seq_scan AS test_last_seq, last_idx_scan AS test_last_idx
-FROM pg_stat_all_tables WHERE relid = 'test_last_scan'::regclass \gset
-SELECT pg_sleep(0.1);
- pg_sleep 
-----------
- 
-(1 row)
-
--- cause one index scan
-BEGIN;
-SET LOCAL enable_seqscan TO off;
-SET LOCAL enable_indexscan TO on;
-SET LOCAL enable_bitmapscan TO off;
-EXPLAIN (COSTS off) SELECT count(*) FROM test_last_scan WHERE idx_col = 1;
-                          QUERY PLAN                          
---------------------------------------------------------------
- Aggregate
-   ->  Index Scan using test_last_scan_pkey on test_last_scan
-         Index Cond: (idx_col = 1)
-(3 rows)
-
-SELECT count(*) FROM test_last_scan WHERE idx_col = 1;
- count 
--------
-     1
-(1 row)
-
-SELECT pg_stat_force_next_flush();
- pg_stat_force_next_flush 
---------------------------
- 
-(1 row)
-
-COMMIT;
--- check that just index scan stats were incremented
-SELECT seq_scan, :'test_last_seq' = last_seq_scan AS seq_ok, idx_scan, :'test_last_idx' < last_idx_scan AS idx_ok
-FROM pg_stat_all_tables WHERE relid = 'test_last_scan'::regclass;
- seq_scan | seq_ok | idx_scan | idx_ok 
-----------+--------+----------+--------
-        2 | t      |        2 | t
-(1 row)
-
--- fetch timestamps from before the next test
-SELECT last_seq_scan AS test_last_seq, last_idx_scan AS test_last_idx
-FROM pg_stat_all_tables WHERE relid = 'test_last_scan'::regclass \gset
-SELECT pg_sleep(0.1);
- pg_sleep 
-----------
- 
-(1 row)
-
--- cause one bitmap index scan
-BEGIN;
-SET LOCAL enable_seqscan TO off;
-SET LOCAL enable_indexscan TO off;
-SET LOCAL enable_bitmapscan TO on;
-EXPLAIN (COSTS off) SELECT count(*) FROM test_last_scan WHERE idx_col = 1;
-                      QUERY PLAN                      
-------------------------------------------------------
- Aggregate
-   ->  Bitmap Heap Scan on test_last_scan
-         Recheck Cond: (idx_col = 1)
-         ->  Bitmap Index Scan on test_last_scan_pkey
-               Index Cond: (idx_col = 1)
-(5 rows)
-
-SELECT count(*) FROM test_last_scan WHERE idx_col = 1;
- count 
--------
-     1
-(1 row)
-
-SELECT pg_stat_force_next_flush();
- pg_stat_force_next_flush 
---------------------------
- 
-(1 row)
-
-COMMIT;
--- check that just index scan stats were incremented
-SELECT seq_scan, :'test_last_seq' = last_seq_scan AS seq_ok, idx_scan, :'test_last_idx' < last_idx_scan AS idx_ok
-FROM pg_stat_all_tables WHERE relid = 'test_last_scan'::regclass;
- seq_scan | seq_ok | idx_scan | idx_ok 
-----------+--------+----------+--------
-        2 | t      |        3 | t
-(1 row)
-
------
--- Test reset of some stats for shared table
------
--- This updates the comment of the database currently in use in
--- pg_shdescription with a fake value, then sets it back to its
--- original value.
-SELECT shobj_description(d.oid, 'pg_database') as description_before
-  FROM pg_database d WHERE datname = current_database() \gset
--- force some stats in pg_shdescription.
-BEGIN;
-SELECT current_database() as datname \gset
-COMMENT ON DATABASE :"datname" IS 'This is a test comment';
-SELECT pg_stat_force_next_flush();
- pg_stat_force_next_flush 
---------------------------
- 
-(1 row)
-
-COMMIT;
--- check that the stats are reset.
-SELECT (n_tup_ins + n_tup_upd) > 0 AS has_data FROM pg_stat_all_tables
-  WHERE relid = 'pg_shdescription'::regclass;
- has_data 
-----------
- t
-(1 row)
-
-SELECT pg_stat_reset_single_table_counters('pg_shdescription'::regclass);
- pg_stat_reset_single_table_counters 
--------------------------------------
- 
-(1 row)
-
-SELECT (n_tup_ins + n_tup_upd) > 0 AS has_data FROM pg_stat_all_tables
-  WHERE relid = 'pg_shdescription'::regclass;
- has_data 
-----------
- f
-(1 row)
-
--- set back comment
-\if :{?description_before}
-  COMMENT ON DATABASE :"datname" IS :'description_before';
-\else
-  COMMENT ON DATABASE :"datname" IS NULL;
-\endif
------
--- Test that various stats views are being properly populated
------
--- Test that sessions is incremented when a new session is started in pg_stat_database
-SELECT sessions AS db_stat_sessions FROM pg_stat_database WHERE datname = (SELECT current_database()) \gset
-\c
-SELECT pg_stat_force_next_flush();
- pg_stat_force_next_flush 
---------------------------
- 
-(1 row)
-
-SELECT sessions > :db_stat_sessions FROM pg_stat_database WHERE datname = (SELECT current_database());
- ?column? 
-----------
- t
-(1 row)
-
--- Test pg_stat_checkpointer checkpointer-related stats, together with pg_stat_wal
-SELECT num_requested AS rqst_ckpts_before FROM pg_stat_checkpointer \gset
--- Test pg_stat_wal (and make a temp table so our temp schema exists)
-SELECT wal_bytes AS wal_bytes_before FROM pg_stat_wal \gset
-CREATE TEMP TABLE test_stats_temp AS SELECT 17;
-DROP TABLE test_stats_temp;
--- Checkpoint twice: The checkpointer reports stats after reporting completion
--- of the checkpoint. But after a second checkpoint we'll see at least the
--- results of the first.
-CHECKPOINT;
-CHECKPOINT;
-SELECT num_requested > :rqst_ckpts_before FROM pg_stat_checkpointer;
- ?column? 
-----------
- t
-(1 row)
-
-SELECT wal_bytes > :wal_bytes_before FROM pg_stat_wal;
- ?column? 
-----------
- t
-(1 row)
-
--- Test pg_stat_get_backend_idset() and some allied functions.
--- In particular, verify that their notion of backend ID matches
--- our temp schema index.
-SELECT (current_schemas(true))[1] = ('pg_temp_' || beid::text) AS match
-FROM pg_stat_get_backend_idset() beid
-WHERE pg_stat_get_backend_pid(beid) = pg_backend_pid();
- match 
--------
- t
-(1 row)
-
------
--- Test that resetting stats works for reset timestamp
------
--- Test that reset_slru with a specified SLRU works.
-SELECT stats_reset AS slru_commit_ts_reset_ts FROM pg_stat_slru WHERE name = 'commit_timestamp' \gset
-SELECT stats_reset AS slru_notify_reset_ts FROM pg_stat_slru WHERE name = 'notify' \gset
-SELECT pg_stat_reset_slru('commit_timestamp');
- pg_stat_reset_slru 
---------------------
- 
-(1 row)
-
-SELECT stats_reset > :'slru_commit_ts_reset_ts'::timestamptz FROM pg_stat_slru WHERE name = 'commit_timestamp';
- ?column? 
-----------
- t
-(1 row)
-
-SELECT stats_reset AS slru_commit_ts_reset_ts FROM pg_stat_slru WHERE name = 'commit_timestamp' \gset
--- Test that multiple SLRUs are reset when no specific SLRU provided to reset function
-SELECT pg_stat_reset_slru();
- pg_stat_reset_slru 
---------------------
- 
-(1 row)
-
-SELECT stats_reset > :'slru_commit_ts_reset_ts'::timestamptz FROM pg_stat_slru WHERE name = 'commit_timestamp';
- ?column? 
-----------
- t
-(1 row)
-
-SELECT stats_reset > :'slru_notify_reset_ts'::timestamptz FROM pg_stat_slru WHERE name = 'notify';
- ?column? 
-----------
- t
-(1 row)
-
--- Test that reset_shared with archiver specified as the stats type works
-SELECT stats_reset AS archiver_reset_ts FROM pg_stat_archiver \gset
-SELECT pg_stat_reset_shared('archiver');
- pg_stat_reset_shared 
-----------------------
- 
-(1 row)
-
-SELECT stats_reset > :'archiver_reset_ts'::timestamptz FROM pg_stat_archiver;
- ?column? 
-----------
- t
-(1 row)
-
--- Test that reset_shared with bgwriter specified as the stats type works
-SELECT stats_reset AS bgwriter_reset_ts FROM pg_stat_bgwriter \gset
-SELECT pg_stat_reset_shared('bgwriter');
- pg_stat_reset_shared 
-----------------------
- 
-(1 row)
-
-SELECT stats_reset > :'bgwriter_reset_ts'::timestamptz FROM pg_stat_bgwriter;
- ?column? 
-----------
- t
-(1 row)
-
--- Test that reset_shared with checkpointer specified as the stats type works
-SELECT stats_reset AS checkpointer_reset_ts FROM pg_stat_checkpointer \gset
-SELECT pg_stat_reset_shared('checkpointer');
- pg_stat_reset_shared 
-----------------------
- 
-(1 row)
-
-SELECT stats_reset > :'checkpointer_reset_ts'::timestamptz FROM pg_stat_checkpointer;
- ?column? 
-----------
- t
-(1 row)
-
--- Test that reset_shared with recovery_prefetch specified as the stats type works
-SELECT stats_reset AS recovery_prefetch_reset_ts FROM pg_stat_recovery_prefetch \gset
-SELECT pg_stat_reset_shared('recovery_prefetch');
- pg_stat_reset_shared 
-----------------------
- 
-(1 row)
-
-SELECT stats_reset > :'recovery_prefetch_reset_ts'::timestamptz FROM pg_stat_recovery_prefetch;
- ?column? 
-----------
- t
-(1 row)
-
--- Test that reset_shared with slru specified as the stats type works
-SELECT max(stats_reset) AS slru_reset_ts FROM pg_stat_slru \gset
-SELECT pg_stat_reset_shared('slru');
- pg_stat_reset_shared 
-----------------------
- 
-(1 row)
-
-SELECT max(stats_reset) > :'slru_reset_ts'::timestamptz FROM pg_stat_slru;
- ?column? 
-----------
- t
-(1 row)
-
--- Test that reset_shared with wal specified as the stats type works
-SELECT stats_reset AS wal_reset_ts FROM pg_stat_wal \gset
-SELECT pg_stat_reset_shared('wal');
- pg_stat_reset_shared 
-----------------------
- 
-(1 row)
-
-SELECT stats_reset > :'wal_reset_ts'::timestamptz FROM pg_stat_wal;
- ?column? 
-----------
- t
-(1 row)
-
--- Test error case for reset_shared with unknown stats type
-SELECT pg_stat_reset_shared('unknown');
-ERROR:  unrecognized reset target: "unknown"
-HINT:  Target must be "archiver", "bgwriter", "checkpointer", "io", "recovery_prefetch", "slru", or "wal".
--- Test that reset works for pg_stat_database
--- Since pg_stat_database stats_reset starts out as NULL, reset it once first so we have something to compare it to
-SELECT pg_stat_reset();
- pg_stat_reset 
----------------
- 
-(1 row)
-
-SELECT stats_reset AS db_reset_ts FROM pg_stat_database WHERE datname = (SELECT current_database()) \gset
-SELECT pg_stat_reset();
- pg_stat_reset 
----------------
- 
-(1 row)
-
-SELECT stats_reset > :'db_reset_ts'::timestamptz FROM pg_stat_database WHERE datname = (SELECT current_database());
- ?column? 
-----------
- t
-(1 row)
-
-----
--- pg_stat_get_snapshot_timestamp behavior
-----
-BEGIN;
-SET LOCAL stats_fetch_consistency = snapshot;
--- no snapshot yet, return NULL
-SELECT pg_stat_get_snapshot_timestamp();
- pg_stat_get_snapshot_timestamp 
---------------------------------
- 
-(1 row)
-
--- any attempt at accessing stats will build snapshot
-SELECT pg_stat_get_function_calls(0);
- pg_stat_get_function_calls 
-----------------------------
-                           
-(1 row)
-
-SELECT pg_stat_get_snapshot_timestamp() >= NOW();
- ?column? 
-----------
- t
-(1 row)
-
--- shows NULL again after clearing
-SELECT pg_stat_clear_snapshot();
- pg_stat_clear_snapshot 
-------------------------
- 
-(1 row)
-
-SELECT pg_stat_get_snapshot_timestamp();
- pg_stat_get_snapshot_timestamp 
---------------------------------
- 
-(1 row)
-
-COMMIT;
-----
--- Changing stats_fetch_consistency in a transaction.
-----
-BEGIN;
--- Stats filled under the cache mode
-SET LOCAL stats_fetch_consistency = cache;
-SELECT pg_stat_get_function_calls(0);
- pg_stat_get_function_calls 
-----------------------------
-                           
-(1 row)
-
-SELECT pg_stat_get_snapshot_timestamp() IS NOT NULL AS snapshot_ok;
- snapshot_ok 
--------------
- f
-(1 row)
-
--- Success in accessing pre-existing snapshot data.
-SET LOCAL stats_fetch_consistency = snapshot;
-SELECT pg_stat_get_snapshot_timestamp() IS NOT NULL AS snapshot_ok;
- snapshot_ok 
--------------
- f
-(1 row)
-
-SELECT pg_stat_get_function_calls(0);
- pg_stat_get_function_calls 
-----------------------------
-                           
-(1 row)
-
-SELECT pg_stat_get_snapshot_timestamp() IS NOT NULL AS snapshot_ok;
- snapshot_ok 
--------------
- t
-(1 row)
-
--- Snapshot cleared.
-SET LOCAL stats_fetch_consistency = none;
-SELECT pg_stat_get_snapshot_timestamp() IS NOT NULL AS snapshot_ok;
- snapshot_ok 
--------------
- f
-(1 row)
-
-SELECT pg_stat_get_function_calls(0);
- pg_stat_get_function_calls 
-----------------------------
-                           
-(1 row)
-
-SELECT pg_stat_get_snapshot_timestamp() IS NOT NULL AS snapshot_ok;
- snapshot_ok 
--------------
- f
-(1 row)
-
-ROLLBACK;
-----
--- pg_stat_have_stats behavior
-----
--- fixed-numbered stats exist
-SELECT pg_stat_have_stats('bgwriter', 0, 0);
- pg_stat_have_stats 
---------------------
- t
-(1 row)
-
--- unknown stats kinds error out
-SELECT pg_stat_have_stats('zaphod', 0, 0);
-ERROR:  invalid statistics kind: "zaphod"
--- db stats have objid 0
-SELECT pg_stat_have_stats('database', :dboid, 1);
- pg_stat_have_stats 
---------------------
- f
-(1 row)
-
-SELECT pg_stat_have_stats('database', :dboid, 0);
- pg_stat_have_stats 
---------------------
- t
-(1 row)
-
--- pg_stat_have_stats returns true for committed index creation
-CREATE table stats_test_tab1 as select generate_series(1,10) a;
-CREATE index stats_test_idx1 on stats_test_tab1(a);
-SELECT 'stats_test_idx1'::regclass::oid AS stats_test_idx1_oid \gset
-SET enable_seqscan TO off;
-select a from stats_test_tab1 where a = 3;
- a 
----
- 3
-(1 row)
-
-SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid);
- pg_stat_have_stats 
---------------------
- t
-(1 row)
-
--- pg_stat_have_stats returns false for dropped index with stats
-SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid);
- pg_stat_have_stats 
---------------------
- t
-(1 row)
-
-DROP index stats_test_idx1;
-SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid);
- pg_stat_have_stats 
---------------------
- f
-(1 row)
-
--- pg_stat_have_stats returns false for rolled back index creation
-BEGIN;
-CREATE index stats_test_idx1 on stats_test_tab1(a);
-SELECT 'stats_test_idx1'::regclass::oid AS stats_test_idx1_oid \gset
-select a from stats_test_tab1 where a = 3;
- a 
----
- 3
-(1 row)
-
-SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid);
- pg_stat_have_stats 
---------------------
- t
-(1 row)
-
-ROLLBACK;
-SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid);
- pg_stat_have_stats 
---------------------
- f
-(1 row)
-
--- pg_stat_have_stats returns true for reindex CONCURRENTLY
-CREATE index stats_test_idx1 on stats_test_tab1(a);
-SELECT 'stats_test_idx1'::regclass::oid AS stats_test_idx1_oid \gset
-select a from stats_test_tab1 where a = 3;
- a 
----
- 3
-(1 row)
-
-SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid);
- pg_stat_have_stats 
---------------------
- t
-(1 row)
-
-REINDEX index CONCURRENTLY stats_test_idx1;
--- false for previous oid
-SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid);
- pg_stat_have_stats 
---------------------
- f
-(1 row)
-
--- true for new oid
-SELECT 'stats_test_idx1'::regclass::oid AS stats_test_idx1_oid \gset
-SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid);
- pg_stat_have_stats 
---------------------
- t
-(1 row)
-
--- pg_stat_have_stats returns true for a rolled back drop index with stats
-BEGIN;
-SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid);
- pg_stat_have_stats 
---------------------
- t
-(1 row)
-
-DROP index stats_test_idx1;
-ROLLBACK;
-SELECT pg_stat_have_stats('relation', :dboid, :stats_test_idx1_oid);
- pg_stat_have_stats 
---------------------
- t
-(1 row)
-
--- put enable_seqscan back to on
-SET enable_seqscan TO on;
--- ensure that stats accessors handle NULL input correctly
-SELECT pg_stat_get_replication_slot(NULL);
- pg_stat_get_replication_slot 
-------------------------------
- 
-(1 row)
-
-SELECT pg_stat_get_subscription_stats(NULL);
- pg_stat_get_subscription_stats 
---------------------------------
- 
-(1 row)
-
--- Test that the following operations are tracked in pg_stat_io:
--- - reads of target blocks into shared buffers
--- - writes of shared buffers to permanent storage
--- - extends of relations using shared buffers
--- - fsyncs done to ensure the durability of data dirtying shared buffers
--- - shared buffer hits
--- There is no test for blocks evicted from shared buffers, because we cannot
--- be sure of the state of shared buffers at the point the test is run.
--- Create a regular table and insert some data to generate IOCONTEXT_NORMAL
--- extends.
-SELECT sum(extends) AS io_sum_shared_before_extends
-  FROM pg_stat_io WHERE context = 'normal' AND object = 'relation' \gset
-SELECT sum(writes) AS writes, sum(fsyncs) AS fsyncs
-  FROM pg_stat_io
-  WHERE object = 'relation' \gset io_sum_shared_before_
-CREATE TABLE test_io_shared(a int);
-INSERT INTO test_io_shared SELECT i FROM generate_series(1,100)i;
-SELECT pg_stat_force_next_flush();
- pg_stat_force_next_flush 
---------------------------
- 
-(1 row)
-
-SELECT sum(extends) AS io_sum_shared_after_extends
-  FROM pg_stat_io WHERE context = 'normal' AND object = 'relation' \gset
-SELECT :io_sum_shared_after_extends > :io_sum_shared_before_extends;
- ?column? 
-----------
- t
-(1 row)
-
--- After a checkpoint, there should be some additional IOCONTEXT_NORMAL writes
--- and fsyncs.
--- See comment above for rationale for two explicit CHECKPOINTs.
-CHECKPOINT;
-CHECKPOINT;
-SELECT sum(writes) AS writes, sum(fsyncs) AS fsyncs
-  FROM pg_stat_io
-  WHERE object = 'relation' \gset io_sum_shared_after_
-SELECT :io_sum_shared_after_writes > :io_sum_shared_before_writes;
- ?column? 
-----------
- t
-(1 row)
-
-SELECT current_setting('fsync') = 'off'
-  OR :io_sum_shared_after_fsyncs > :io_sum_shared_before_fsyncs;
- ?column? 
-----------
- t
-(1 row)
-
--- Change the tablespace so that the table is rewritten directly, then SELECT
--- from it to cause it to be read back into shared buffers.
-SELECT sum(reads) AS io_sum_shared_before_reads
-  FROM pg_stat_io WHERE context = 'normal' AND object = 'relation' \gset
--- Do this in a transaction to prevent spurious failures due to concurrent accesses to our newly
--- rewritten table, e.g. by autovacuum.
-BEGIN;
-ALTER TABLE test_io_shared SET TABLESPACE regress_tblspace;
--- SELECT from the table so that the data is read into shared buffers and
--- context 'normal', object 'relation' reads are counted.
-SELECT COUNT(*) FROM test_io_shared;
- count 
--------
-   100
-(1 row)
-
-COMMIT;
-SELECT pg_stat_force_next_flush();
- pg_stat_force_next_flush 
---------------------------
- 
-(1 row)
-
-SELECT sum(reads) AS io_sum_shared_after_reads
-  FROM pg_stat_io WHERE context = 'normal' AND object = 'relation'  \gset
-SELECT :io_sum_shared_after_reads > :io_sum_shared_before_reads;
- ?column? 
-----------
- t
-(1 row)
-
-SELECT sum(hits) AS io_sum_shared_before_hits
-  FROM pg_stat_io WHERE context = 'normal' AND object = 'relation' \gset
--- Select from the table again to count hits.
--- Ensure we generate hits by forcing a nested loop self-join with no
--- materialize node. The outer side's buffer will stay pinned, preventing its
--- eviction, while we loop through the inner side and generate hits.
-BEGIN;
-SET LOCAL enable_nestloop TO on; SET LOCAL enable_mergejoin TO off;
-SET LOCAL enable_hashjoin TO off; SET LOCAL enable_material TO off;
--- ensure plan stays as we expect it to
-EXPLAIN (COSTS OFF) SELECT COUNT(*) FROM test_io_shared t1 INNER JOIN test_io_shared t2 USING (a);
-                QUERY PLAN                 
--------------------------------------------
- Aggregate
-   ->  Nested Loop
-         Join Filter: (t1.a = t2.a)
-         ->  Seq Scan on test_io_shared t1
-         ->  Seq Scan on test_io_shared t2
-(5 rows)
-
-SELECT COUNT(*) FROM test_io_shared t1 INNER JOIN test_io_shared t2 USING (a);
- count 
--------
-   100
-(1 row)
-
-COMMIT;
-SELECT pg_stat_force_next_flush();
- pg_stat_force_next_flush 
---------------------------
- 
-(1 row)
-
-SELECT sum(hits) AS io_sum_shared_after_hits
-  FROM pg_stat_io WHERE context = 'normal' AND object = 'relation' \gset
-SELECT :io_sum_shared_after_hits > :io_sum_shared_before_hits;
- ?column? 
-----------
- t
-(1 row)
-
-DROP TABLE test_io_shared;
--- Test that the follow IOCONTEXT_LOCAL IOOps are tracked in pg_stat_io:
--- - eviction of local buffers in order to reuse them
--- - reads of temporary table blocks into local buffers
--- - writes of local buffers to permanent storage
--- - extends of temporary tables
--- Set temp_buffers to its minimum so that we can trigger writes with fewer
--- inserted tuples. Do so in a new session in case temporary tables have been
--- accessed by previous tests in this session.
-\c
-SET temp_buffers TO 100;
-CREATE TEMPORARY TABLE test_io_local(a int, b TEXT);
-SELECT sum(extends) AS extends, sum(evictions) AS evictions, sum(writes) AS writes
-  FROM pg_stat_io
-  WHERE context = 'normal' AND object = 'temp relation' \gset io_sum_local_before_
--- Insert tuples into the temporary table, generating extends in the stats.
--- Insert enough values that we need to reuse and write out dirty local
--- buffers, generating evictions and writes.
-INSERT INTO test_io_local SELECT generate_series(1, 5000) as id, repeat('a', 200);
--- Ensure the table is large enough to exceed our temp_buffers setting.
-SELECT pg_relation_size('test_io_local') / current_setting('block_size')::int8 > 100;
- ?column? 
-----------
- t
-(1 row)
-
-SELECT sum(reads) AS io_sum_local_before_reads
-  FROM pg_stat_io WHERE context = 'normal' AND object = 'temp relation' \gset
--- Read in evicted buffers, generating reads.
-SELECT COUNT(*) FROM test_io_local;
- count 
--------
-  5000
-(1 row)
-
-SELECT pg_stat_force_next_flush();
- pg_stat_force_next_flush 
---------------------------
- 
-(1 row)
-
-SELECT sum(evictions) AS evictions,
-       sum(reads) AS reads,
-       sum(writes) AS writes,
-       sum(extends) AS extends
-  FROM pg_stat_io
-  WHERE context = 'normal' AND object = 'temp relation'  \gset io_sum_local_after_
-SELECT :io_sum_local_after_evictions > :io_sum_local_before_evictions,
-       :io_sum_local_after_reads > :io_sum_local_before_reads,
-       :io_sum_local_after_writes > :io_sum_local_before_writes,
-       :io_sum_local_after_extends > :io_sum_local_before_extends;
- ?column? | ?column? | ?column? | ?column? 
-----------+----------+----------+----------
- t        | t        | t        | t
-(1 row)
-
--- Change the tablespaces so that the temporary table is rewritten to other
--- local buffers, exercising a different codepath than standard local buffer
--- writes.
-ALTER TABLE test_io_local SET TABLESPACE regress_tblspace;
-SELECT pg_stat_force_next_flush();
- pg_stat_force_next_flush 
---------------------------
- 
-(1 row)
-
-SELECT sum(writes) AS io_sum_local_new_tblspc_writes
-  FROM pg_stat_io WHERE context = 'normal' AND object = 'temp relation'  \gset
-SELECT :io_sum_local_new_tblspc_writes > :io_sum_local_after_writes;
- ?column? 
-----------
- t
-(1 row)
-
-RESET temp_buffers;
--- Test that reuse of strategy buffers and reads of blocks into these reused
--- buffers while VACUUMing are tracked in pg_stat_io. If there is sufficient
--- demand for shared buffers from concurrent queries, some buffers may be
--- pinned by other backends before they can be reused. In such cases, the
--- backend will evict a buffer from outside the ring and add it to the
--- ring. This is considered an eviction and not a reuse.
--- Set wal_skip_threshold smaller than the expected size of
--- test_io_vac_strategy so that, even if wal_level is minimal, VACUUM FULL will
--- fsync the newly rewritten test_io_vac_strategy instead of writing it to WAL.
--- Writing it to WAL will result in the newly written relation pages being in
--- shared buffers -- preventing us from testing BAS_VACUUM BufferAccessStrategy
--- reads.
-SET wal_skip_threshold = '1 kB';
-SELECT sum(reuses) AS reuses, sum(reads) AS reads, sum(evictions) AS evictions
-  FROM pg_stat_io WHERE context = 'vacuum' \gset io_sum_vac_strategy_before_
-CREATE TABLE test_io_vac_strategy(a int, b int) WITH (autovacuum_enabled = 'false');
-INSERT INTO test_io_vac_strategy SELECT i, i from generate_series(1, 4500)i;
--- Ensure that the next VACUUM will need to perform IO by rewriting the table
--- first with VACUUM (FULL).
-VACUUM (FULL) test_io_vac_strategy;
--- Use the minimum BUFFER_USAGE_LIMIT to cause reuses or evictions with the
--- smallest table possible.
-VACUUM (PARALLEL 0, BUFFER_USAGE_LIMIT 128) test_io_vac_strategy;
-SELECT pg_stat_force_next_flush();
- pg_stat_force_next_flush 
---------------------------
- 
-(1 row)
-
-SELECT sum(reuses) AS reuses, sum(reads) AS reads, sum(evictions) AS evictions
-  FROM pg_stat_io WHERE context = 'vacuum' \gset io_sum_vac_strategy_after_
-SELECT :io_sum_vac_strategy_after_reads > :io_sum_vac_strategy_before_reads;
- ?column? 
-----------
- t
-(1 row)
-
-SELECT (:io_sum_vac_strategy_after_reuses + :io_sum_vac_strategy_after_evictions) >
-  (:io_sum_vac_strategy_before_reuses + :io_sum_vac_strategy_before_evictions);
- ?column? 
-----------
- t
-(1 row)
-
-RESET wal_skip_threshold;
--- Test that extends done by a CTAS, which uses a BAS_BULKWRITE
--- BufferAccessStrategy, are tracked in pg_stat_io.
-SELECT sum(extends) AS io_sum_bulkwrite_strategy_extends_before
-  FROM pg_stat_io WHERE context = 'bulkwrite' \gset
-CREATE TABLE test_io_bulkwrite_strategy AS SELECT i FROM generate_series(1,100)i;
-SELECT pg_stat_force_next_flush();
- pg_stat_force_next_flush 
---------------------------
- 
-(1 row)
-
-SELECT sum(extends) AS io_sum_bulkwrite_strategy_extends_after
-  FROM pg_stat_io WHERE context = 'bulkwrite' \gset
-SELECT :io_sum_bulkwrite_strategy_extends_after > :io_sum_bulkwrite_strategy_extends_before;
- ?column? 
-----------
- t
-(1 row)
-
--- Test IO stats reset
-SELECT pg_stat_have_stats('io', 0, 0);
- pg_stat_have_stats 
---------------------
- t
-(1 row)
-
-SELECT sum(evictions) + sum(reuses) + sum(extends) + sum(fsyncs) + sum(reads) + sum(writes) + sum(writebacks) + sum(hits) AS io_stats_pre_reset
-  FROM pg_stat_io \gset
-SELECT pg_stat_reset_shared('io');
- pg_stat_reset_shared 
-----------------------
- 
-(1 row)
-
-SELECT sum(evictions) + sum(reuses) + sum(extends) + sum(fsyncs) + sum(reads) + sum(writes) + sum(writebacks) + sum(hits) AS io_stats_post_reset
-  FROM pg_stat_io \gset
-SELECT :io_stats_post_reset < :io_stats_pre_reset;
- ?column? 
-----------
- t
-(1 row)
-
--- test BRIN index doesn't block HOT update
-CREATE TABLE brin_hot (
-  id  integer PRIMARY KEY,
-  val integer NOT NULL
-) WITH (autovacuum_enabled = off, fillfactor = 70);
-INSERT INTO brin_hot SELECT *, 0 FROM generate_series(1, 235);
-CREATE INDEX val_brin ON brin_hot using brin(val);
-CREATE FUNCTION wait_for_hot_stats() RETURNS void AS $$
-DECLARE
-  start_time timestamptz := clock_timestamp();
-  updated bool;
-BEGIN
-  -- we don't want to wait forever; loop will exit after 30 seconds
-  FOR i IN 1 .. 300 LOOP
-    SELECT (pg_stat_get_tuples_hot_updated('brin_hot'::regclass::oid) > 0) INTO updated;
-    EXIT WHEN updated;
-
-    -- wait a little
-    PERFORM pg_sleep_for('100 milliseconds');
-    -- reset stats snapshot so we can test again
-    PERFORM pg_stat_clear_snapshot();
-  END LOOP;
-  -- report time waited in postmaster log (where it won't change test output)
-  RAISE log 'wait_for_hot_stats delayed % seconds',
-    EXTRACT(epoch FROM clock_timestamp() - start_time);
-END
-$$ LANGUAGE plpgsql;
-UPDATE brin_hot SET val = -3 WHERE id = 42;
--- We can't just call wait_for_hot_stats() at this point, because we only
--- transmit stats when the session goes idle, and we probably didn't
--- transmit the last couple of counts yet thanks to the rate-limiting logic
--- in pgstat_report_stat().  But instead of waiting for the rate limiter's
--- timeout to elapse, let's just start a new session.  The old one will
--- then send its stats before dying.
-\c -
-SELECT wait_for_hot_stats();
- wait_for_hot_stats 
---------------------
- 
-(1 row)
-
-SELECT pg_stat_get_tuples_hot_updated('brin_hot'::regclass::oid);
- pg_stat_get_tuples_hot_updated 
---------------------------------
-                              1
-(1 row)
-
-DROP TABLE brin_hot;
-DROP FUNCTION wait_for_hot_stats();
--- Test handling of index predicates - updating attributes in precicates
--- should not block HOT when summarizing indexes are involved. We update
--- a row that was not indexed due to the index predicate, and becomes
--- indexable - the HOT-updated tuple is forwarded to the BRIN index.
-CREATE TABLE brin_hot_2 (a int, b int);
-INSERT INTO brin_hot_2 VALUES (1, 100);
-CREATE INDEX ON brin_hot_2 USING brin (b) WHERE a = 2;
-UPDATE brin_hot_2 SET a = 2;
-EXPLAIN (COSTS OFF) SELECT * FROM brin_hot_2 WHERE a = 2 AND b = 100;
-            QUERY PLAN             
------------------------------------
- Seq Scan on brin_hot_2
-   Filter: ((a = 2) AND (b = 100))
-(2 rows)
-
-SELECT COUNT(*) FROM brin_hot_2 WHERE a = 2 AND b = 100;
- count 
--------
-     1
-(1 row)
-
-SET enable_seqscan = off;
-EXPLAIN (COSTS OFF) SELECT * FROM brin_hot_2 WHERE a = 2 AND b = 100;
-                 QUERY PLAN                  
----------------------------------------------
- Bitmap Heap Scan on brin_hot_2
-   Recheck Cond: ((b = 100) AND (a = 2))
-   ->  Bitmap Index Scan on brin_hot_2_b_idx
-         Index Cond: (b = 100)
-(4 rows)
-
-SELECT COUNT(*) FROM brin_hot_2 WHERE a = 2 AND b = 100;
- count 
--------
-     1
-(1 row)
-
-DROP TABLE brin_hot_2;
--- Test that updates to indexed columns are still propagated to the
--- BRIN column.
--- https://postgr.es/m/05ebcb44-f383-86e3-4f31-0a97a55634cf@enterprisedb.com
-CREATE TABLE brin_hot_3 (a int, filler text) WITH (fillfactor = 10);
-INSERT INTO brin_hot_3 SELECT 1, repeat(' ', 500) FROM generate_series(1, 20);
-CREATE INDEX ON brin_hot_3 USING brin (a) WITH (pages_per_range = 1);
-UPDATE brin_hot_3 SET a = 2;
-EXPLAIN (COSTS OFF) SELECT * FROM brin_hot_3 WHERE a = 2;
-                 QUERY PLAN                  
----------------------------------------------
- Bitmap Heap Scan on brin_hot_3
-   Recheck Cond: (a = 2)
-   ->  Bitmap Index Scan on brin_hot_3_a_idx
-         Index Cond: (a = 2)
-(4 rows)
-
-SELECT COUNT(*) FROM brin_hot_3 WHERE a = 2;
- count 
--------
-    20
-(1 row)
-
-DROP TABLE brin_hot_3;
-SET enable_seqscan = on;
--- End of Stats Test
+psql: error: connection to server on socket "/tmp/f_SDOOqtof/.s.PGSQL.16412" failed: No such file or directory
+	Is the server running locally and accepting connections on that socket?
diff -U3 /tmp/cirrus-ci-build/src/test/regress/expected/predicate.out /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/predicate.out
--- /tmp/cirrus-ci-build/src/test/regress/expected/predicate.out	2024-09-20 04:07:19.058820871 +0000
+++ /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/predicate.out	2024-09-20 04:17:09.157564724 +0000
@@ -1,292 +1,2 @@
---
--- Tests for predicate handling
---
---
--- Test that restrictions that are always true are ignored, and that are always
--- false are replaced with constant-FALSE
---
--- Currently we only check for NullTest quals and OR clauses that include
--- NullTest quals.  We may extend it in the future.
---
-CREATE TABLE pred_tab (a int NOT NULL, b int, c int NOT NULL);
---
--- Test restriction clauses
---
--- Ensure the IS_NOT_NULL qual is ignored when the column is non-nullable
-EXPLAIN (COSTS OFF)
-SELECT * FROM pred_tab t WHERE t.a IS NOT NULL;
-       QUERY PLAN       
-------------------------
- Seq Scan on pred_tab t
-(1 row)
-
--- Ensure the IS_NOT_NULL qual is not ignored on a nullable column
-EXPLAIN (COSTS OFF)
-SELECT * FROM pred_tab t WHERE t.b IS NOT NULL;
-        QUERY PLAN         
----------------------------
- Seq Scan on pred_tab t
-   Filter: (b IS NOT NULL)
-(2 rows)
-
--- Ensure the IS_NULL qual is reduced to constant-FALSE for non-nullable
--- columns
-EXPLAIN (COSTS OFF)
-SELECT * FROM pred_tab t WHERE t.a IS NULL;
-        QUERY PLAN        
---------------------------
- Result
-   One-Time Filter: false
-(2 rows)
-
--- Ensure the IS_NULL qual is not reduced to constant-FALSE on nullable
--- columns
-EXPLAIN (COSTS OFF)
-SELECT * FROM pred_tab t WHERE t.b IS NULL;
-       QUERY PLAN       
-------------------------
- Seq Scan on pred_tab t
-   Filter: (b IS NULL)
-(2 rows)
-
---
--- Tests for OR clauses in restriction clauses
---
--- Ensure the OR clause is ignored when an OR branch is always true
-EXPLAIN (COSTS OFF)
-SELECT * FROM pred_tab t WHERE t.a IS NOT NULL OR t.b = 1;
-       QUERY PLAN       
-------------------------
- Seq Scan on pred_tab t
-(1 row)
-
--- Ensure the OR clause is not ignored for NullTests that can't be proven
--- always true
-EXPLAIN (COSTS OFF)
-SELECT * FROM pred_tab t WHERE t.b IS NOT NULL OR t.a = 1;
-               QUERY PLAN               
-----------------------------------------
- Seq Scan on pred_tab t
-   Filter: ((b IS NOT NULL) OR (a = 1))
-(2 rows)
-
--- Ensure the OR clause is reduced to constant-FALSE when all branches are
--- provably false
-EXPLAIN (COSTS OFF)
-SELECT * FROM pred_tab t WHERE t.a IS NULL OR t.c IS NULL;
-        QUERY PLAN        
---------------------------
- Result
-   One-Time Filter: false
-(2 rows)
-
--- Ensure the OR clause is not reduced to constant-FALSE when not all branches
--- are provably false
-EXPLAIN (COSTS OFF)
-SELECT * FROM pred_tab t WHERE t.b IS NULL OR t.c IS NULL;
-               QUERY PLAN               
-----------------------------------------
- Seq Scan on pred_tab t
-   Filter: ((b IS NULL) OR (c IS NULL))
-(2 rows)
-
---
--- Test join clauses
---
--- Ensure the IS_NOT_NULL qual is ignored, since a) it's on a NOT NULL column,
--- and b) its Var is not nullable by any outer joins
-EXPLAIN (COSTS OFF)
-SELECT * FROM pred_tab t1
-    LEFT JOIN pred_tab t2 ON TRUE
-    LEFT JOIN pred_tab t3 ON t2.a IS NOT NULL;
-                   QUERY PLAN                    
--------------------------------------------------
- Nested Loop Left Join
-   ->  Seq Scan on pred_tab t1
-   ->  Materialize
-         ->  Nested Loop Left Join
-               ->  Seq Scan on pred_tab t2
-               ->  Materialize
-                     ->  Seq Scan on pred_tab t3
-(7 rows)
-
--- Ensure the IS_NOT_NULL qual is not ignored when columns are made nullable
--- by an outer join
-EXPLAIN (COSTS OFF)
-SELECT * FROM pred_tab t1
-    LEFT JOIN pred_tab t2 ON t1.a = 1
-    LEFT JOIN pred_tab t3 ON t2.a IS NOT NULL;
-                QUERY PLAN                 
--------------------------------------------
- Nested Loop Left Join
-   Join Filter: (t2.a IS NOT NULL)
-   ->  Nested Loop Left Join
-         Join Filter: (t1.a = 1)
-         ->  Seq Scan on pred_tab t1
-         ->  Materialize
-               ->  Seq Scan on pred_tab t2
-   ->  Materialize
-         ->  Seq Scan on pred_tab t3
-(9 rows)
-
--- Ensure the IS_NULL qual is reduced to constant-FALSE, since a) it's on a NOT
--- NULL column, and b) its Var is not nullable by any outer joins
-EXPLAIN (COSTS OFF)
-SELECT * FROM pred_tab t1
-    LEFT JOIN pred_tab t2 ON TRUE
-    LEFT JOIN pred_tab t3 ON t2.a IS NULL AND t2.b = 1;
-                    QUERY PLAN                     
----------------------------------------------------
- Nested Loop Left Join
-   ->  Seq Scan on pred_tab t1
-   ->  Materialize
-         ->  Nested Loop Left Join
-               Join Filter: (false AND (t2.b = 1))
-               ->  Seq Scan on pred_tab t2
-               ->  Result
-                     One-Time Filter: false
-(8 rows)
-
--- Ensure the IS_NULL qual is not reduced to constant-FALSE when the column is
--- nullable by an outer join
-EXPLAIN (COSTS OFF)
-SELECT * FROM pred_tab t1
-    LEFT JOIN pred_tab t2 ON t1.a = 1
-    LEFT JOIN pred_tab t3 ON t2.a IS NULL;
-                QUERY PLAN                 
--------------------------------------------
- Nested Loop Left Join
-   Join Filter: (t2.a IS NULL)
-   ->  Nested Loop Left Join
-         Join Filter: (t1.a = 1)
-         ->  Seq Scan on pred_tab t1
-         ->  Materialize
-               ->  Seq Scan on pred_tab t2
-   ->  Materialize
-         ->  Seq Scan on pred_tab t3
-(9 rows)
-
---
--- Tests for OR clauses in join clauses
---
--- Ensure the OR clause is ignored when an OR branch is provably always true
-EXPLAIN (COSTS OFF)
-SELECT * FROM pred_tab t1
-    LEFT JOIN pred_tab t2 ON TRUE
-    LEFT JOIN pred_tab t3 ON t2.a IS NOT NULL OR t2.b = 1;
-                   QUERY PLAN                    
--------------------------------------------------
- Nested Loop Left Join
-   ->  Seq Scan on pred_tab t1
-   ->  Materialize
-         ->  Nested Loop Left Join
-               ->  Seq Scan on pred_tab t2
-               ->  Materialize
-                     ->  Seq Scan on pred_tab t3
-(7 rows)
-
--- Ensure the NullTest is not ignored when the column is nullable by an outer
--- join
-EXPLAIN (COSTS OFF)
-SELECT * FROM pred_tab t1
-    LEFT JOIN pred_tab t2 ON t1.a = 1
-    LEFT JOIN pred_tab t3 ON t2.a IS NOT NULL OR t2.b = 1;
-                    QUERY PLAN                     
----------------------------------------------------
- Nested Loop Left Join
-   Join Filter: ((t2.a IS NOT NULL) OR (t2.b = 1))
-   ->  Nested Loop Left Join
-         Join Filter: (t1.a = 1)
-         ->  Seq Scan on pred_tab t1
-         ->  Materialize
-               ->  Seq Scan on pred_tab t2
-   ->  Materialize
-         ->  Seq Scan on pred_tab t3
-(9 rows)
-
--- Ensure the OR clause is reduced to constant-FALSE when all OR branches are
--- provably false
-EXPLAIN (COSTS OFF)
-SELECT * FROM pred_tab t1
-    LEFT JOIN pred_tab t2 ON TRUE
-    LEFT JOIN pred_tab t3 ON (t2.a IS NULL OR t2.c IS NULL) AND t2.b = 1;
-                    QUERY PLAN                     
----------------------------------------------------
- Nested Loop Left Join
-   ->  Seq Scan on pred_tab t1
-   ->  Materialize
-         ->  Nested Loop Left Join
-               Join Filter: (false AND (t2.b = 1))
-               ->  Seq Scan on pred_tab t2
-               ->  Result
-                     One-Time Filter: false
-(8 rows)
-
--- Ensure the OR clause is not reduced to constant-FALSE when a column is
--- made nullable from an outer join
-EXPLAIN (COSTS OFF)
-SELECT * FROM pred_tab t1
-    LEFT JOIN pred_tab t2 ON t1.a = 1
-    LEFT JOIN pred_tab t3 ON t2.a IS NULL OR t2.c IS NULL;
-                    QUERY PLAN                     
----------------------------------------------------
- Nested Loop Left Join
-   Join Filter: ((t2.a IS NULL) OR (t2.c IS NULL))
-   ->  Nested Loop Left Join
-         Join Filter: (t1.a = 1)
-         ->  Seq Scan on pred_tab t1
-         ->  Materialize
-               ->  Seq Scan on pred_tab t2
-   ->  Materialize
-         ->  Seq Scan on pred_tab t3
-(9 rows)
-
-DROP TABLE pred_tab;
--- Validate we handle IS NULL and IS NOT NULL quals correctly with inheritance
--- parents.
-CREATE TABLE pred_parent (a int);
-CREATE TABLE pred_child () INHERITS (pred_parent);
-ALTER TABLE ONLY pred_parent ALTER a SET NOT NULL;
--- Ensure that the scan on pred_child contains the IS NOT NULL qual.
-EXPLAIN (COSTS OFF)
-SELECT * FROM pred_parent WHERE a IS NOT NULL;
-                 QUERY PLAN                  
----------------------------------------------
- Append
-   ->  Seq Scan on pred_parent pred_parent_1
-   ->  Seq Scan on pred_child pred_parent_2
-         Filter: (a IS NOT NULL)
-(4 rows)
-
--- Ensure we only scan pred_child and not pred_parent
-EXPLAIN (COSTS OFF)
-SELECT * FROM pred_parent WHERE a IS NULL;
-             QUERY PLAN             
-------------------------------------
- Seq Scan on pred_child pred_parent
-   Filter: (a IS NULL)
-(2 rows)
-
-ALTER TABLE pred_parent ALTER a DROP NOT NULL;
-ALTER TABLE pred_child ALTER a SET NOT NULL;
--- Ensure the IS NOT NULL qual is removed from the pred_child scan.
-EXPLAIN (COSTS OFF)
-SELECT * FROM pred_parent WHERE a IS NOT NULL;
-                 QUERY PLAN                  
----------------------------------------------
- Append
-   ->  Seq Scan on pred_parent pred_parent_1
-         Filter: (a IS NOT NULL)
-   ->  Seq Scan on pred_child pred_parent_2
-(4 rows)
-
--- Ensure we only scan pred_parent and not pred_child
-EXPLAIN (COSTS OFF)
-SELECT * FROM pred_parent WHERE a IS NULL;
-       QUERY PLAN        
--------------------------
- Seq Scan on pred_parent
-   Filter: (a IS NULL)
-(2 rows)
-
-DROP TABLE pred_parent, pred_child;
+psql: error: connection to server on socket "/tmp/f_SDOOqtof/.s.PGSQL.16412" failed: No such file or directory
+	Is the server running locally and accepting connections on that socket?
diff -U3 /tmp/cirrus-ci-build/src/test/regress/expected/oidjoins.out /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/oidjoins.out
--- /tmp/cirrus-ci-build/src/test/regress/expected/oidjoins.out	2024-09-20 04:07:19.046795992 +0000
+++ /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/oidjoins.out	2024-09-20 04:17:09.249564634 +0000
@@ -1,272 +1,2 @@
---
--- Verify system catalog foreign key relationships
---
-DO $doblock$
-declare
-  fk record;
-  nkeys integer;
-  cmd text;
-  err record;
-begin
-  for fk in select * from pg_get_catalog_foreign_keys()
-  loop
-    raise notice 'checking % % => % %',
-      fk.fktable, fk.fkcols, fk.pktable, fk.pkcols;
-    nkeys := array_length(fk.fkcols, 1);
-    cmd := 'SELECT ctid';
-    for i in 1 .. nkeys loop
-      cmd := cmd || ', ' || quote_ident(fk.fkcols[i]);
-    end loop;
-    if fk.is_array then
-      cmd := cmd || ' FROM (SELECT ctid';
-      for i in 1 .. nkeys-1 loop
-        cmd := cmd || ', ' || quote_ident(fk.fkcols[i]);
-      end loop;
-      cmd := cmd || ', unnest(' || quote_ident(fk.fkcols[nkeys]);
-      cmd := cmd || ') as ' || quote_ident(fk.fkcols[nkeys]);
-      cmd := cmd || ' FROM ' || fk.fktable::text || ') fk WHERE ';
-    else
-      cmd := cmd || ' FROM ' || fk.fktable::text || ' fk WHERE ';
-    end if;
-    if fk.is_opt then
-      for i in 1 .. nkeys loop
-        cmd := cmd || quote_ident(fk.fkcols[i]) || ' != 0 AND ';
-      end loop;
-    end if;
-    cmd := cmd || 'NOT EXISTS(SELECT 1 FROM ' || fk.pktable::text || ' pk WHERE ';
-    for i in 1 .. nkeys loop
-      if i > 1 then cmd := cmd || ' AND '; end if;
-      cmd := cmd || 'pk.' || quote_ident(fk.pkcols[i]);
-      cmd := cmd || ' = fk.' || quote_ident(fk.fkcols[i]);
-    end loop;
-    cmd := cmd || ')';
-    -- raise notice 'cmd = %', cmd;
-    for err in execute cmd loop
-      raise warning 'FK VIOLATION IN %(%): %', fk.fktable, fk.fkcols, err;
-    end loop;
-  end loop;
-end
-$doblock$;
-NOTICE:  checking pg_proc {pronamespace} => pg_namespace {oid}
-NOTICE:  checking pg_proc {proowner} => pg_authid {oid}
-NOTICE:  checking pg_proc {prolang} => pg_language {oid}
-NOTICE:  checking pg_proc {provariadic} => pg_type {oid}
-NOTICE:  checking pg_proc {prosupport} => pg_proc {oid}
-NOTICE:  checking pg_proc {prorettype} => pg_type {oid}
-NOTICE:  checking pg_proc {proargtypes} => pg_type {oid}
-NOTICE:  checking pg_proc {proallargtypes} => pg_type {oid}
-NOTICE:  checking pg_proc {protrftypes} => pg_type {oid}
-NOTICE:  checking pg_type {typnamespace} => pg_namespace {oid}
-NOTICE:  checking pg_type {typowner} => pg_authid {oid}
-NOTICE:  checking pg_type {typrelid} => pg_class {oid}
-NOTICE:  checking pg_type {typsubscript} => pg_proc {oid}
-NOTICE:  checking pg_type {typelem} => pg_type {oid}
-NOTICE:  checking pg_type {typarray} => pg_type {oid}
-NOTICE:  checking pg_type {typinput} => pg_proc {oid}
-NOTICE:  checking pg_type {typoutput} => pg_proc {oid}
-NOTICE:  checking pg_type {typreceive} => pg_proc {oid}
-NOTICE:  checking pg_type {typsend} => pg_proc {oid}
-NOTICE:  checking pg_type {typmodin} => pg_proc {oid}
-NOTICE:  checking pg_type {typmodout} => pg_proc {oid}
-NOTICE:  checking pg_type {typanalyze} => pg_proc {oid}
-NOTICE:  checking pg_type {typbasetype} => pg_type {oid}
-NOTICE:  checking pg_type {typcollation} => pg_collation {oid}
-NOTICE:  checking pg_attribute {attrelid} => pg_class {oid}
-NOTICE:  checking pg_attribute {atttypid} => pg_type {oid}
-NOTICE:  checking pg_attribute {attcollation} => pg_collation {oid}
-NOTICE:  checking pg_class {relnamespace} => pg_namespace {oid}
-NOTICE:  checking pg_class {reltype} => pg_type {oid}
-NOTICE:  checking pg_class {reloftype} => pg_type {oid}
-NOTICE:  checking pg_class {relowner} => pg_authid {oid}
-NOTICE:  checking pg_class {relam} => pg_am {oid}
-NOTICE:  checking pg_class {reltablespace} => pg_tablespace {oid}
-NOTICE:  checking pg_class {reltoastrelid} => pg_class {oid}
-NOTICE:  checking pg_class {relrewrite} => pg_class {oid}
-NOTICE:  checking pg_attrdef {adrelid} => pg_class {oid}
-NOTICE:  checking pg_attrdef {adrelid,adnum} => pg_attribute {attrelid,attnum}
-NOTICE:  checking pg_constraint {connamespace} => pg_namespace {oid}
-NOTICE:  checking pg_constraint {conrelid} => pg_class {oid}
-NOTICE:  checking pg_constraint {contypid} => pg_type {oid}
-NOTICE:  checking pg_constraint {conindid} => pg_class {oid}
-NOTICE:  checking pg_constraint {conparentid} => pg_constraint {oid}
-NOTICE:  checking pg_constraint {confrelid} => pg_class {oid}
-NOTICE:  checking pg_constraint {conpfeqop} => pg_operator {oid}
-NOTICE:  checking pg_constraint {conppeqop} => pg_operator {oid}
-NOTICE:  checking pg_constraint {conffeqop} => pg_operator {oid}
-NOTICE:  checking pg_constraint {conexclop} => pg_operator {oid}
-NOTICE:  checking pg_constraint {conrelid,conkey} => pg_attribute {attrelid,attnum}
-NOTICE:  checking pg_constraint {confrelid,confkey} => pg_attribute {attrelid,attnum}
-NOTICE:  checking pg_inherits {inhrelid} => pg_class {oid}
-NOTICE:  checking pg_inherits {inhparent} => pg_class {oid}
-NOTICE:  checking pg_index {indexrelid} => pg_class {oid}
-NOTICE:  checking pg_index {indrelid} => pg_class {oid}
-NOTICE:  checking pg_index {indcollation} => pg_collation {oid}
-NOTICE:  checking pg_index {indclass} => pg_opclass {oid}
-NOTICE:  checking pg_index {indrelid,indkey} => pg_attribute {attrelid,attnum}
-NOTICE:  checking pg_operator {oprnamespace} => pg_namespace {oid}
-NOTICE:  checking pg_operator {oprowner} => pg_authid {oid}
-NOTICE:  checking pg_operator {oprleft} => pg_type {oid}
-NOTICE:  checking pg_operator {oprright} => pg_type {oid}
-NOTICE:  checking pg_operator {oprresult} => pg_type {oid}
-NOTICE:  checking pg_operator {oprcom} => pg_operator {oid}
-NOTICE:  checking pg_operator {oprnegate} => pg_operator {oid}
-NOTICE:  checking pg_operator {oprcode} => pg_proc {oid}
-NOTICE:  checking pg_operator {oprrest} => pg_proc {oid}
-NOTICE:  checking pg_operator {oprjoin} => pg_proc {oid}
-NOTICE:  checking pg_opfamily {opfmethod} => pg_am {oid}
-NOTICE:  checking pg_opfamily {opfnamespace} => pg_namespace {oid}
-NOTICE:  checking pg_opfamily {opfowner} => pg_authid {oid}
-NOTICE:  checking pg_opclass {opcmethod} => pg_am {oid}
-NOTICE:  checking pg_opclass {opcnamespace} => pg_namespace {oid}
-NOTICE:  checking pg_opclass {opcowner} => pg_authid {oid}
-NOTICE:  checking pg_opclass {opcfamily} => pg_opfamily {oid}
-NOTICE:  checking pg_opclass {opcintype} => pg_type {oid}
-NOTICE:  checking pg_opclass {opckeytype} => pg_type {oid}
-NOTICE:  checking pg_am {amhandler} => pg_proc {oid}
-NOTICE:  checking pg_amop {amopfamily} => pg_opfamily {oid}
-NOTICE:  checking pg_amop {amoplefttype} => pg_type {oid}
-NOTICE:  checking pg_amop {amoprighttype} => pg_type {oid}
-NOTICE:  checking pg_amop {amopopr} => pg_operator {oid}
-NOTICE:  checking pg_amop {amopmethod} => pg_am {oid}
-NOTICE:  checking pg_amop {amopsortfamily} => pg_opfamily {oid}
-NOTICE:  checking pg_amproc {amprocfamily} => pg_opfamily {oid}
-NOTICE:  checking pg_amproc {amproclefttype} => pg_type {oid}
-NOTICE:  checking pg_amproc {amprocrighttype} => pg_type {oid}
-NOTICE:  checking pg_amproc {amproc} => pg_proc {oid}
-NOTICE:  checking pg_language {lanowner} => pg_authid {oid}
-NOTICE:  checking pg_language {lanplcallfoid} => pg_proc {oid}
-NOTICE:  checking pg_language {laninline} => pg_proc {oid}
-NOTICE:  checking pg_language {lanvalidator} => pg_proc {oid}
-NOTICE:  checking pg_largeobject_metadata {lomowner} => pg_authid {oid}
-NOTICE:  checking pg_largeobject {loid} => pg_largeobject_metadata {oid}
-NOTICE:  checking pg_aggregate {aggfnoid} => pg_proc {oid}
-NOTICE:  checking pg_aggregate {aggtransfn} => pg_proc {oid}
-NOTICE:  checking pg_aggregate {aggfinalfn} => pg_proc {oid}
-NOTICE:  checking pg_aggregate {aggcombinefn} => pg_proc {oid}
-NOTICE:  checking pg_aggregate {aggserialfn} => pg_proc {oid}
-NOTICE:  checking pg_aggregate {aggdeserialfn} => pg_proc {oid}
-NOTICE:  checking pg_aggregate {aggmtransfn} => pg_proc {oid}
-NOTICE:  checking pg_aggregate {aggminvtransfn} => pg_proc {oid}
-NOTICE:  checking pg_aggregate {aggmfinalfn} => pg_proc {oid}
-NOTICE:  checking pg_aggregate {aggsortop} => pg_operator {oid}
-NOTICE:  checking pg_aggregate {aggtranstype} => pg_type {oid}
-NOTICE:  checking pg_aggregate {aggmtranstype} => pg_type {oid}
-NOTICE:  checking pg_statistic {starelid} => pg_class {oid}
-NOTICE:  checking pg_statistic {staop1} => pg_operator {oid}
-NOTICE:  checking pg_statistic {staop2} => pg_operator {oid}
-NOTICE:  checking pg_statistic {staop3} => pg_operator {oid}
-NOTICE:  checking pg_statistic {staop4} => pg_operator {oid}
-NOTICE:  checking pg_statistic {staop5} => pg_operator {oid}
-NOTICE:  checking pg_statistic {stacoll1} => pg_collation {oid}
-NOTICE:  checking pg_statistic {stacoll2} => pg_collation {oid}
-NOTICE:  checking pg_statistic {stacoll3} => pg_collation {oid}
-NOTICE:  checking pg_statistic {stacoll4} => pg_collation {oid}
-NOTICE:  checking pg_statistic {stacoll5} => pg_collation {oid}
-NOTICE:  checking pg_statistic {starelid,staattnum} => pg_attribute {attrelid,attnum}
-NOTICE:  checking pg_statistic_ext {stxrelid} => pg_class {oid}
-NOTICE:  checking pg_statistic_ext {stxnamespace} => pg_namespace {oid}
-NOTICE:  checking pg_statistic_ext {stxowner} => pg_authid {oid}
-NOTICE:  checking pg_statistic_ext {stxrelid,stxkeys} => pg_attribute {attrelid,attnum}
-NOTICE:  checking pg_statistic_ext_data {stxoid} => pg_statistic_ext {oid}
-NOTICE:  checking pg_rewrite {ev_class} => pg_class {oid}
-NOTICE:  checking pg_trigger {tgrelid} => pg_class {oid}
-NOTICE:  checking pg_trigger {tgparentid} => pg_trigger {oid}
-NOTICE:  checking pg_trigger {tgfoid} => pg_proc {oid}
-NOTICE:  checking pg_trigger {tgconstrrelid} => pg_class {oid}
-NOTICE:  checking pg_trigger {tgconstrindid} => pg_class {oid}
-NOTICE:  checking pg_trigger {tgconstraint} => pg_constraint {oid}
-NOTICE:  checking pg_trigger {tgrelid,tgattr} => pg_attribute {attrelid,attnum}
-NOTICE:  checking pg_event_trigger {evtowner} => pg_authid {oid}
-NOTICE:  checking pg_event_trigger {evtfoid} => pg_proc {oid}
-NOTICE:  checking pg_description {classoid} => pg_class {oid}
-NOTICE:  checking pg_cast {castsource} => pg_type {oid}
-NOTICE:  checking pg_cast {casttarget} => pg_type {oid}
-NOTICE:  checking pg_cast {castfunc} => pg_proc {oid}
-NOTICE:  checking pg_enum {enumtypid} => pg_type {oid}
-NOTICE:  checking pg_namespace {nspowner} => pg_authid {oid}
-NOTICE:  checking pg_conversion {connamespace} => pg_namespace {oid}
-NOTICE:  checking pg_conversion {conowner} => pg_authid {oid}
-NOTICE:  checking pg_conversion {conproc} => pg_proc {oid}
-NOTICE:  checking pg_depend {classid} => pg_class {oid}
-NOTICE:  checking pg_depend {refclassid} => pg_class {oid}
-NOTICE:  checking pg_database {datdba} => pg_authid {oid}
-NOTICE:  checking pg_database {dattablespace} => pg_tablespace {oid}
-NOTICE:  checking pg_db_role_setting {setdatabase} => pg_database {oid}
-NOTICE:  checking pg_db_role_setting {setrole} => pg_authid {oid}
-NOTICE:  checking pg_tablespace {spcowner} => pg_authid {oid}
-NOTICE:  checking pg_auth_members {roleid} => pg_authid {oid}
-NOTICE:  checking pg_auth_members {member} => pg_authid {oid}
-NOTICE:  checking pg_auth_members {grantor} => pg_authid {oid}
-NOTICE:  checking pg_shdepend {dbid} => pg_database {oid}
-NOTICE:  checking pg_shdepend {classid} => pg_class {oid}
-NOTICE:  checking pg_shdepend {refclassid} => pg_class {oid}
-NOTICE:  checking pg_shdescription {classoid} => pg_class {oid}
-NOTICE:  checking pg_ts_config {cfgnamespace} => pg_namespace {oid}
-NOTICE:  checking pg_ts_config {cfgowner} => pg_authid {oid}
-NOTICE:  checking pg_ts_config {cfgparser} => pg_ts_parser {oid}
-NOTICE:  checking pg_ts_config_map {mapcfg} => pg_ts_config {oid}
-NOTICE:  checking pg_ts_config_map {mapdict} => pg_ts_dict {oid}
-NOTICE:  checking pg_ts_dict {dictnamespace} => pg_namespace {oid}
-NOTICE:  checking pg_ts_dict {dictowner} => pg_authid {oid}
-NOTICE:  checking pg_ts_dict {dicttemplate} => pg_ts_template {oid}
-NOTICE:  checking pg_ts_parser {prsnamespace} => pg_namespace {oid}
-NOTICE:  checking pg_ts_parser {prsstart} => pg_proc {oid}
-NOTICE:  checking pg_ts_parser {prstoken} => pg_proc {oid}
-NOTICE:  checking pg_ts_parser {prsend} => pg_proc {oid}
-NOTICE:  checking pg_ts_parser {prsheadline} => pg_proc {oid}
-NOTICE:  checking pg_ts_parser {prslextype} => pg_proc {oid}
-NOTICE:  checking pg_ts_template {tmplnamespace} => pg_namespace {oid}
-NOTICE:  checking pg_ts_template {tmplinit} => pg_proc {oid}
-NOTICE:  checking pg_ts_template {tmpllexize} => pg_proc {oid}
-NOTICE:  checking pg_extension {extowner} => pg_authid {oid}
-NOTICE:  checking pg_extension {extnamespace} => pg_namespace {oid}
-NOTICE:  checking pg_extension {extconfig} => pg_class {oid}
-NOTICE:  checking pg_foreign_data_wrapper {fdwowner} => pg_authid {oid}
-NOTICE:  checking pg_foreign_data_wrapper {fdwhandler} => pg_proc {oid}
-NOTICE:  checking pg_foreign_data_wrapper {fdwvalidator} => pg_proc {oid}
-NOTICE:  checking pg_foreign_server {srvowner} => pg_authid {oid}
-NOTICE:  checking pg_foreign_server {srvfdw} => pg_foreign_data_wrapper {oid}
-NOTICE:  checking pg_user_mapping {umuser} => pg_authid {oid}
-NOTICE:  checking pg_user_mapping {umserver} => pg_foreign_server {oid}
-NOTICE:  checking pg_foreign_table {ftrelid} => pg_class {oid}
-NOTICE:  checking pg_foreign_table {ftserver} => pg_foreign_server {oid}
-NOTICE:  checking pg_policy {polrelid} => pg_class {oid}
-NOTICE:  checking pg_policy {polroles} => pg_authid {oid}
-NOTICE:  checking pg_default_acl {defaclrole} => pg_authid {oid}
-NOTICE:  checking pg_default_acl {defaclnamespace} => pg_namespace {oid}
-NOTICE:  checking pg_init_privs {classoid} => pg_class {oid}
-NOTICE:  checking pg_seclabel {classoid} => pg_class {oid}
-NOTICE:  checking pg_shseclabel {classoid} => pg_class {oid}
-NOTICE:  checking pg_collation {collnamespace} => pg_namespace {oid}
-NOTICE:  checking pg_collation {collowner} => pg_authid {oid}
-NOTICE:  checking pg_partitioned_table {partrelid} => pg_class {oid}
-NOTICE:  checking pg_partitioned_table {partdefid} => pg_class {oid}
-NOTICE:  checking pg_partitioned_table {partclass} => pg_opclass {oid}
-NOTICE:  checking pg_partitioned_table {partcollation} => pg_collation {oid}
-NOTICE:  checking pg_partitioned_table {partrelid,partattrs} => pg_attribute {attrelid,attnum}
-NOTICE:  checking pg_range {rngtypid} => pg_type {oid}
-NOTICE:  checking pg_range {rngsubtype} => pg_type {oid}
-NOTICE:  checking pg_range {rngmultitypid} => pg_type {oid}
-NOTICE:  checking pg_range {rngcollation} => pg_collation {oid}
-NOTICE:  checking pg_range {rngsubopc} => pg_opclass {oid}
-NOTICE:  checking pg_range {rngcanonical} => pg_proc {oid}
-NOTICE:  checking pg_range {rngsubdiff} => pg_proc {oid}
-NOTICE:  checking pg_transform {trftype} => pg_type {oid}
-NOTICE:  checking pg_transform {trflang} => pg_language {oid}
-NOTICE:  checking pg_transform {trffromsql} => pg_proc {oid}
-NOTICE:  checking pg_transform {trftosql} => pg_proc {oid}
-NOTICE:  checking pg_sequence {seqrelid} => pg_class {oid}
-NOTICE:  checking pg_sequence {seqtypid} => pg_type {oid}
-NOTICE:  checking pg_publication {pubowner} => pg_authid {oid}
-NOTICE:  checking pg_publication_namespace {pnpubid} => pg_publication {oid}
-NOTICE:  checking pg_publication_namespace {pnnspid} => pg_namespace {oid}
-NOTICE:  checking pg_publication_rel {prpubid} => pg_publication {oid}
-NOTICE:  checking pg_publication_rel {prrelid} => pg_class {oid}
-NOTICE:  checking pg_subscription {subdbid} => pg_database {oid}
-NOTICE:  checking pg_subscription {subowner} => pg_authid {oid}
-NOTICE:  checking pg_subscription_rel {srsubid} => pg_subscription {oid}
-NOTICE:  checking pg_subscription_rel {srrelid} => pg_class {oid}
-NOTICE:  checking pg_variable {vartype} => pg_type {oid}
-NOTICE:  checking pg_variable {varnamespace} => pg_namespace {oid}
-NOTICE:  checking pg_variable {varowner} => pg_authid {oid}
-NOTICE:  checking pg_variable {varcollation} => pg_collation {oid}
+psql: error: connection to server on socket "/tmp/f_SDOOqtof/.s.PGSQL.16412" failed: No such file or directory
+	Is the server running locally and accepting connections on that socket?
diff -U3 /tmp/cirrus-ci-build/src/test/regress/expected/event_trigger.out /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/event_trigger.out
--- /tmp/cirrus-ci-build/src/test/regress/expected/event_trigger.out	2024-09-20 04:07:19.010721357 +0000
+++ /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/event_trigger.out	2024-09-20 04:17:09.249564634 +0000
@@ -1,742 +1,2 @@
--- should fail, return type mismatch
-create event trigger regress_event_trigger
-   on ddl_command_start
-   execute procedure pg_backend_pid();
-ERROR:  function pg_backend_pid must return type event_trigger
--- OK
-create function test_event_trigger() returns event_trigger as $$
-BEGIN
-    RAISE NOTICE 'test_event_trigger: % %', tg_event, tg_tag;
-END
-$$ language plpgsql;
--- should fail, can't call it as a plain function
-SELECT test_event_trigger();
-ERROR:  trigger functions can only be called as triggers
-CONTEXT:  compilation of PL/pgSQL function "test_event_trigger" near line 1
--- should fail, event triggers cannot have declared arguments
-create function test_event_trigger_arg(name text)
-returns event_trigger as $$ BEGIN RETURN 1; END $$ language plpgsql;
-ERROR:  event trigger functions cannot have declared arguments
-CONTEXT:  compilation of PL/pgSQL function "test_event_trigger_arg" near line 1
--- should fail, SQL functions cannot be event triggers
-create function test_event_trigger_sql() returns event_trigger as $$
-SELECT 1 $$ language sql;
-ERROR:  SQL functions cannot return type event_trigger
--- should fail, no elephant_bootstrap entry point
-create event trigger regress_event_trigger on elephant_bootstrap
-   execute procedure test_event_trigger();
-ERROR:  unrecognized event name "elephant_bootstrap"
--- OK
-create event trigger regress_event_trigger on ddl_command_start
-   execute procedure test_event_trigger();
--- OK
-create event trigger regress_event_trigger_end on ddl_command_end
-   execute function test_event_trigger();
--- should fail, food is not a valid filter variable
-create event trigger regress_event_trigger2 on ddl_command_start
-   when food in ('sandwich')
-   execute procedure test_event_trigger();
-ERROR:  unrecognized filter variable "food"
--- should fail, sandwich is not a valid command tag
-create event trigger regress_event_trigger2 on ddl_command_start
-   when tag in ('sandwich')
-   execute procedure test_event_trigger();
-ERROR:  filter value "sandwich" not recognized for filter variable "tag"
--- should fail, create skunkcabbage is not a valid command tag
-create event trigger regress_event_trigger2 on ddl_command_start
-   when tag in ('create table', 'create skunkcabbage')
-   execute procedure test_event_trigger();
-ERROR:  filter value "create skunkcabbage" not recognized for filter variable "tag"
--- should fail, can't have event triggers on event triggers
-create event trigger regress_event_trigger2 on ddl_command_start
-   when tag in ('DROP EVENT TRIGGER')
-   execute procedure test_event_trigger();
-ERROR:  event triggers are not supported for DROP EVENT TRIGGER
--- should fail, can't have event triggers on global objects
-create event trigger regress_event_trigger2 on ddl_command_start
-   when tag in ('CREATE ROLE')
-   execute procedure test_event_trigger();
-ERROR:  event triggers are not supported for CREATE ROLE
--- should fail, can't have event triggers on global objects
-create event trigger regress_event_trigger2 on ddl_command_start
-   when tag in ('CREATE DATABASE')
-   execute procedure test_event_trigger();
-ERROR:  event triggers are not supported for CREATE DATABASE
--- should fail, can't have event triggers on global objects
-create event trigger regress_event_trigger2 on ddl_command_start
-   when tag in ('CREATE TABLESPACE')
-   execute procedure test_event_trigger();
-ERROR:  event triggers are not supported for CREATE TABLESPACE
--- should fail, can't have same filter variable twice
-create event trigger regress_event_trigger2 on ddl_command_start
-   when tag in ('create table') and tag in ('CREATE FUNCTION')
-   execute procedure test_event_trigger();
-ERROR:  filter variable "tag" specified more than once
--- should fail, can't have arguments
-create event trigger regress_event_trigger2 on ddl_command_start
-   execute procedure test_event_trigger('argument not allowed');
-ERROR:  syntax error at or near "'argument not allowed'"
-LINE 2:    execute procedure test_event_trigger('argument not allowe...
-                                                ^
--- OK
-create event trigger regress_event_trigger2 on ddl_command_start
-   when tag in ('create table', 'CREATE FUNCTION')
-   execute procedure test_event_trigger();
--- OK
-comment on event trigger regress_event_trigger is 'test comment';
--- drop as non-superuser should fail
-create role regress_evt_user;
-set role regress_evt_user;
-create event trigger regress_event_trigger_noperms on ddl_command_start
-   execute procedure test_event_trigger();
-ERROR:  permission denied to create event trigger "regress_event_trigger_noperms"
-HINT:  Must be superuser to create an event trigger.
-reset role;
--- test enabling and disabling
-alter event trigger regress_event_trigger disable;
--- fires _trigger2 and _trigger_end should fire, but not _trigger
-create table event_trigger_fire1 (a int);
-NOTICE:  test_event_trigger: ddl_command_start CREATE TABLE
-NOTICE:  test_event_trigger: ddl_command_end CREATE TABLE
-alter event trigger regress_event_trigger enable;
-set session_replication_role = replica;
--- fires nothing
-create table event_trigger_fire2 (a int);
-alter event trigger regress_event_trigger enable replica;
--- fires only _trigger
-create table event_trigger_fire3 (a int);
-NOTICE:  test_event_trigger: ddl_command_start CREATE TABLE
-alter event trigger regress_event_trigger enable always;
--- fires only _trigger
-create table event_trigger_fire4 (a int);
-NOTICE:  test_event_trigger: ddl_command_start CREATE TABLE
-reset session_replication_role;
--- fires all three
-create table event_trigger_fire5 (a int);
-NOTICE:  test_event_trigger: ddl_command_start CREATE TABLE
-NOTICE:  test_event_trigger: ddl_command_start CREATE TABLE
-NOTICE:  test_event_trigger: ddl_command_end CREATE TABLE
--- non-top-level command
-create function f1() returns int
-language plpgsql
-as $$
-begin
-  create table event_trigger_fire6 (a int);
-  return 0;
-end $$;
-NOTICE:  test_event_trigger: ddl_command_start CREATE FUNCTION
-NOTICE:  test_event_trigger: ddl_command_start CREATE FUNCTION
-NOTICE:  test_event_trigger: ddl_command_end CREATE FUNCTION
-select f1();
-NOTICE:  test_event_trigger: ddl_command_start CREATE TABLE
-NOTICE:  test_event_trigger: ddl_command_start CREATE TABLE
-NOTICE:  test_event_trigger: ddl_command_end CREATE TABLE
- f1 
-----
-  0
-(1 row)
-
--- non-top-level command
-create procedure p1()
-language plpgsql
-as $$
-begin
-  create table event_trigger_fire7 (a int);
-end $$;
-NOTICE:  test_event_trigger: ddl_command_start CREATE PROCEDURE
-NOTICE:  test_event_trigger: ddl_command_end CREATE PROCEDURE
-call p1();
-NOTICE:  test_event_trigger: ddl_command_start CREATE TABLE
-NOTICE:  test_event_trigger: ddl_command_start CREATE TABLE
-NOTICE:  test_event_trigger: ddl_command_end CREATE TABLE
--- clean up
-alter event trigger regress_event_trigger disable;
-drop table event_trigger_fire2, event_trigger_fire3, event_trigger_fire4, event_trigger_fire5, event_trigger_fire6, event_trigger_fire7;
-NOTICE:  test_event_trigger: ddl_command_end DROP TABLE
-drop routine f1(), p1();
-NOTICE:  test_event_trigger: ddl_command_end DROP ROUTINE
--- regress_event_trigger_end should fire on these commands
-grant all on table event_trigger_fire1 to public;
-NOTICE:  test_event_trigger: ddl_command_end GRANT
-comment on table event_trigger_fire1 is 'here is a comment';
-NOTICE:  test_event_trigger: ddl_command_end COMMENT
-revoke all on table event_trigger_fire1 from public;
-NOTICE:  test_event_trigger: ddl_command_end REVOKE
-drop table event_trigger_fire1;
-NOTICE:  test_event_trigger: ddl_command_end DROP TABLE
-create foreign data wrapper useless;
-NOTICE:  test_event_trigger: ddl_command_end CREATE FOREIGN DATA WRAPPER
-create server useless_server foreign data wrapper useless;
-NOTICE:  test_event_trigger: ddl_command_end CREATE SERVER
-create user mapping for regress_evt_user server useless_server;
-NOTICE:  test_event_trigger: ddl_command_end CREATE USER MAPPING
-alter default privileges for role regress_evt_user
- revoke delete on tables from regress_evt_user;
-NOTICE:  test_event_trigger: ddl_command_end ALTER DEFAULT PRIVILEGES
--- alter owner to non-superuser should fail
-alter event trigger regress_event_trigger owner to regress_evt_user;
-ERROR:  permission denied to change owner of event trigger "regress_event_trigger"
-HINT:  The owner of an event trigger must be a superuser.
--- alter owner to superuser should work
-alter role regress_evt_user superuser;
-alter event trigger regress_event_trigger owner to regress_evt_user;
--- should fail, name collision
-alter event trigger regress_event_trigger rename to regress_event_trigger2;
-ERROR:  event trigger "regress_event_trigger2" already exists
--- OK
-alter event trigger regress_event_trigger rename to regress_event_trigger3;
--- should fail, doesn't exist any more
-drop event trigger regress_event_trigger;
-ERROR:  event trigger "regress_event_trigger" does not exist
--- should fail, regress_evt_user owns some objects
-drop role regress_evt_user;
-ERROR:  role "regress_evt_user" cannot be dropped because some objects depend on it
-DETAIL:  owner of event trigger regress_event_trigger3
-owner of user mapping for regress_evt_user on server useless_server
-owner of default privileges on new relations belonging to role regress_evt_user
--- cleanup before next test
--- these are all OK; the second one should emit a NOTICE
-drop event trigger if exists regress_event_trigger2;
-drop event trigger if exists regress_event_trigger2;
-NOTICE:  event trigger "regress_event_trigger2" does not exist, skipping
-drop event trigger regress_event_trigger3;
-drop event trigger regress_event_trigger_end;
--- test support for dropped objects
-CREATE SCHEMA schema_one authorization regress_evt_user;
-CREATE SCHEMA schema_two authorization regress_evt_user;
-CREATE SCHEMA audit_tbls authorization regress_evt_user;
-CREATE TEMP TABLE a_temp_tbl ();
-SET SESSION AUTHORIZATION regress_evt_user;
-CREATE TABLE schema_one.table_one(a int);
-CREATE TABLE schema_one."table two"(a int);
-CREATE TABLE schema_one.table_three(a int);
-CREATE TABLE audit_tbls.schema_one_table_two(the_value text);
-CREATE TABLE schema_two.table_two(a int);
-CREATE TABLE schema_two.table_three(a int, b text);
-CREATE TABLE audit_tbls.schema_two_table_three(the_value text);
-CREATE OR REPLACE FUNCTION schema_two.add(int, int) RETURNS int LANGUAGE plpgsql
-  CALLED ON NULL INPUT
-  AS $$ BEGIN RETURN coalesce($1,0) + coalesce($2,0); END; $$;
-CREATE AGGREGATE schema_two.newton
-  (BASETYPE = int, SFUNC = schema_two.add, STYPE = int);
-RESET SESSION AUTHORIZATION;
-CREATE TABLE undroppable_objs (
-	object_type text,
-	object_identity text
-);
-INSERT INTO undroppable_objs VALUES
-('table', 'schema_one.table_three'),
-('table', 'audit_tbls.schema_two_table_three');
-CREATE TABLE dropped_objects (
-	type text,
-	schema text,
-	object text
-);
--- This tests errors raised within event triggers; the one in audit_tbls
--- uses 2nd-level recursive invocation via test_evtrig_dropped_objects().
-CREATE OR REPLACE FUNCTION undroppable() RETURNS event_trigger
-LANGUAGE plpgsql AS $$
-DECLARE
-	obj record;
-BEGIN
-	PERFORM 1 FROM pg_tables WHERE tablename = 'undroppable_objs';
-	IF NOT FOUND THEN
-		RAISE NOTICE 'table undroppable_objs not found, skipping';
-		RETURN;
-	END IF;
-	FOR obj IN
-		SELECT * FROM pg_event_trigger_dropped_objects() JOIN
-			undroppable_objs USING (object_type, object_identity)
-	LOOP
-		RAISE EXCEPTION 'object % of type % cannot be dropped',
-			obj.object_identity, obj.object_type;
-	END LOOP;
-END;
-$$;
-CREATE EVENT TRIGGER undroppable ON sql_drop
-	EXECUTE PROCEDURE undroppable();
-CREATE OR REPLACE FUNCTION test_evtrig_dropped_objects() RETURNS event_trigger
-LANGUAGE plpgsql AS $$
-DECLARE
-    obj record;
-BEGIN
-    FOR obj IN SELECT * FROM pg_event_trigger_dropped_objects()
-    LOOP
-        IF obj.object_type = 'table' THEN
-                EXECUTE format('DROP TABLE IF EXISTS audit_tbls.%I',
-					format('%s_%s', obj.schema_name, obj.object_name));
-        END IF;
-
-	INSERT INTO dropped_objects
-		(type, schema, object) VALUES
-		(obj.object_type, obj.schema_name, obj.object_identity);
-    END LOOP;
-END
-$$;
-CREATE EVENT TRIGGER regress_event_trigger_drop_objects ON sql_drop
-	WHEN TAG IN ('drop table', 'drop function', 'drop view',
-		'drop owned', 'drop schema', 'alter table')
-	EXECUTE PROCEDURE test_evtrig_dropped_objects();
-ALTER TABLE schema_one.table_one DROP COLUMN a;
-DROP SCHEMA schema_one, schema_two CASCADE;
-NOTICE:  drop cascades to 7 other objects
-DETAIL:  drop cascades to table schema_two.table_two
-drop cascades to table schema_two.table_three
-drop cascades to function schema_two.add(integer,integer)
-drop cascades to function schema_two.newton(integer)
-drop cascades to table schema_one.table_one
-drop cascades to table schema_one."table two"
-drop cascades to table schema_one.table_three
-NOTICE:  table "schema_two_table_two" does not exist, skipping
-NOTICE:  table "audit_tbls_schema_two_table_three" does not exist, skipping
-ERROR:  object audit_tbls.schema_two_table_three of type table cannot be dropped
-CONTEXT:  PL/pgSQL function undroppable() line 14 at RAISE
-SQL statement "DROP TABLE IF EXISTS audit_tbls.schema_two_table_three"
-PL/pgSQL function test_evtrig_dropped_objects() line 8 at EXECUTE
-DELETE FROM undroppable_objs WHERE object_identity = 'audit_tbls.schema_two_table_three';
-DROP SCHEMA schema_one, schema_two CASCADE;
-NOTICE:  drop cascades to 7 other objects
-DETAIL:  drop cascades to table schema_two.table_two
-drop cascades to table schema_two.table_three
-drop cascades to function schema_two.add(integer,integer)
-drop cascades to function schema_two.newton(integer)
-drop cascades to table schema_one.table_one
-drop cascades to table schema_one."table two"
-drop cascades to table schema_one.table_three
-NOTICE:  table "schema_two_table_two" does not exist, skipping
-NOTICE:  table "audit_tbls_schema_two_table_three" does not exist, skipping
-NOTICE:  table "schema_one_table_one" does not exist, skipping
-NOTICE:  table "schema_one_table two" does not exist, skipping
-NOTICE:  table "schema_one_table_three" does not exist, skipping
-ERROR:  object schema_one.table_three of type table cannot be dropped
-CONTEXT:  PL/pgSQL function undroppable() line 14 at RAISE
-DELETE FROM undroppable_objs WHERE object_identity = 'schema_one.table_three';
-DROP SCHEMA schema_one, schema_two CASCADE;
-NOTICE:  drop cascades to 7 other objects
-DETAIL:  drop cascades to table schema_two.table_two
-drop cascades to table schema_two.table_three
-drop cascades to function schema_two.add(integer,integer)
-drop cascades to function schema_two.newton(integer)
-drop cascades to table schema_one.table_one
-drop cascades to table schema_one."table two"
-drop cascades to table schema_one.table_three
-NOTICE:  table "schema_two_table_two" does not exist, skipping
-NOTICE:  table "audit_tbls_schema_two_table_three" does not exist, skipping
-NOTICE:  table "schema_one_table_one" does not exist, skipping
-NOTICE:  table "schema_one_table two" does not exist, skipping
-NOTICE:  table "schema_one_table_three" does not exist, skipping
-SELECT * FROM dropped_objects WHERE schema IS NULL OR schema <> 'pg_toast';
-     type     |   schema   |               object                
---------------+------------+-------------------------------------
- table column | schema_one | schema_one.table_one.a
- schema       |            | schema_two
- table        | schema_two | schema_two.table_two
- type         | schema_two | schema_two.table_two
- type         | schema_two | schema_two.table_two[]
- table        | audit_tbls | audit_tbls.schema_two_table_three
- type         | audit_tbls | audit_tbls.schema_two_table_three
- type         | audit_tbls | audit_tbls.schema_two_table_three[]
- table        | schema_two | schema_two.table_three
- type         | schema_two | schema_two.table_three
- type         | schema_two | schema_two.table_three[]
- function     | schema_two | schema_two.add(integer,integer)
- aggregate    | schema_two | schema_two.newton(integer)
- schema       |            | schema_one
- table        | schema_one | schema_one.table_one
- type         | schema_one | schema_one.table_one
- type         | schema_one | schema_one.table_one[]
- table        | schema_one | schema_one."table two"
- type         | schema_one | schema_one."table two"
- type         | schema_one | schema_one."table two"[]
- table        | schema_one | schema_one.table_three
- type         | schema_one | schema_one.table_three
- type         | schema_one | schema_one.table_three[]
-(23 rows)
-
-DROP OWNED BY regress_evt_user;
-NOTICE:  schema "audit_tbls" does not exist, skipping
-SELECT * FROM dropped_objects WHERE type = 'schema';
-  type  | schema |   object   
---------+--------+------------
- schema |        | schema_two
- schema |        | schema_one
- schema |        | audit_tbls
-(3 rows)
-
-DROP ROLE regress_evt_user;
-DROP EVENT TRIGGER regress_event_trigger_drop_objects;
-DROP EVENT TRIGGER undroppable;
--- Event triggers on relations.
-CREATE OR REPLACE FUNCTION event_trigger_report_dropped()
- RETURNS event_trigger
- LANGUAGE plpgsql
-AS $$
-DECLARE r record;
-BEGIN
-    FOR r IN SELECT * from pg_event_trigger_dropped_objects()
-    LOOP
-    IF NOT r.normal AND NOT r.original THEN
-        CONTINUE;
-    END IF;
-    RAISE NOTICE 'NORMAL: orig=% normal=% istemp=% type=% identity=% name=% args=%',
-        r.original, r.normal, r.is_temporary, r.object_type,
-        r.object_identity, r.address_names, r.address_args;
-    END LOOP;
-END; $$;
-CREATE EVENT TRIGGER regress_event_trigger_report_dropped ON sql_drop
-    EXECUTE PROCEDURE event_trigger_report_dropped();
-CREATE OR REPLACE FUNCTION event_trigger_report_end()
- RETURNS event_trigger
- LANGUAGE plpgsql
-AS $$
-DECLARE r RECORD;
-BEGIN
-    FOR r IN SELECT * FROM pg_event_trigger_ddl_commands()
-    LOOP
-        RAISE NOTICE 'END: command_tag=% type=% identity=%',
-            r.command_tag, r.object_type, r.object_identity;
-    END LOOP;
-END; $$;
-CREATE EVENT TRIGGER regress_event_trigger_report_end ON ddl_command_end
-  EXECUTE PROCEDURE event_trigger_report_end();
-CREATE SCHEMA evttrig
-	CREATE TABLE one (col_a SERIAL PRIMARY KEY, col_b text DEFAULT 'forty two', col_c SERIAL)
-	CREATE INDEX one_idx ON one (col_b)
-	CREATE TABLE two (col_c INTEGER CHECK (col_c > 0) REFERENCES one DEFAULT 42)
-	CREATE TABLE id (col_d int NOT NULL GENERATED ALWAYS AS IDENTITY);
-NOTICE:  END: command_tag=CREATE SCHEMA type=schema identity=evttrig
-NOTICE:  END: command_tag=CREATE SEQUENCE type=sequence identity=evttrig.one_col_a_seq
-NOTICE:  END: command_tag=CREATE SEQUENCE type=sequence identity=evttrig.one_col_c_seq
-NOTICE:  END: command_tag=CREATE TABLE type=table identity=evttrig.one
-NOTICE:  END: command_tag=CREATE INDEX type=index identity=evttrig.one_pkey
-NOTICE:  END: command_tag=ALTER SEQUENCE type=sequence identity=evttrig.one_col_a_seq
-NOTICE:  END: command_tag=ALTER SEQUENCE type=sequence identity=evttrig.one_col_c_seq
-NOTICE:  END: command_tag=CREATE TABLE type=table identity=evttrig.two
-NOTICE:  END: command_tag=ALTER TABLE type=table identity=evttrig.two
-NOTICE:  END: command_tag=CREATE SEQUENCE type=sequence identity=evttrig.id_col_d_seq
-NOTICE:  END: command_tag=CREATE TABLE type=table identity=evttrig.id
-NOTICE:  END: command_tag=ALTER SEQUENCE type=sequence identity=evttrig.id_col_d_seq
-NOTICE:  END: command_tag=CREATE INDEX type=index identity=evttrig.one_idx
--- Partitioned tables with a partitioned index
-CREATE TABLE evttrig.parted (
-    id int PRIMARY KEY)
-    PARTITION BY RANGE (id);
-NOTICE:  END: command_tag=CREATE TABLE type=table identity=evttrig.parted
-NOTICE:  END: command_tag=CREATE INDEX type=index identity=evttrig.parted_pkey
-CREATE TABLE evttrig.part_1_10 PARTITION OF evttrig.parted (id)
-  FOR VALUES FROM (1) TO (10);
-NOTICE:  END: command_tag=CREATE TABLE type=table identity=evttrig.part_1_10
-CREATE TABLE evttrig.part_10_20 PARTITION OF evttrig.parted (id)
-  FOR VALUES FROM (10) TO (20) PARTITION BY RANGE (id);
-NOTICE:  END: command_tag=CREATE TABLE type=table identity=evttrig.part_10_20
-CREATE TABLE evttrig.part_10_15 PARTITION OF evttrig.part_10_20 (id)
-  FOR VALUES FROM (10) TO (15);
-NOTICE:  END: command_tag=CREATE TABLE type=table identity=evttrig.part_10_15
-CREATE TABLE evttrig.part_15_20 PARTITION OF evttrig.part_10_20 (id)
-  FOR VALUES FROM (15) TO (20);
-NOTICE:  END: command_tag=CREATE TABLE type=table identity=evttrig.part_15_20
-ALTER TABLE evttrig.two DROP COLUMN col_c;
-NOTICE:  NORMAL: orig=t normal=f istemp=f type=table column identity=evttrig.two.col_c name={evttrig,two,col_c} args={}
-NOTICE:  NORMAL: orig=f normal=t istemp=f type=table constraint identity=two_col_c_check on evttrig.two name={evttrig,two,two_col_c_check} args={}
-NOTICE:  END: command_tag=ALTER TABLE type=table identity=evttrig.two
-ALTER TABLE evttrig.one ALTER COLUMN col_b DROP DEFAULT;
-NOTICE:  NORMAL: orig=t normal=f istemp=f type=default value identity=for evttrig.one.col_b name={evttrig,one,col_b} args={}
-NOTICE:  END: command_tag=ALTER TABLE type=table identity=evttrig.one
-ALTER TABLE evttrig.one DROP CONSTRAINT one_pkey;
-NOTICE:  NORMAL: orig=t normal=f istemp=f type=table constraint identity=one_pkey on evttrig.one name={evttrig,one,one_pkey} args={}
-NOTICE:  END: command_tag=ALTER TABLE type=table identity=evttrig.one
-ALTER TABLE evttrig.one DROP COLUMN col_c;
-NOTICE:  NORMAL: orig=t normal=f istemp=f type=table column identity=evttrig.one.col_c name={evttrig,one,col_c} args={}
-NOTICE:  NORMAL: orig=f normal=t istemp=f type=default value identity=for evttrig.one.col_c name={evttrig,one,col_c} args={}
-NOTICE:  END: command_tag=ALTER TABLE type=table identity=evttrig.one
-ALTER TABLE evttrig.id ALTER COLUMN col_d SET DATA TYPE bigint;
-NOTICE:  END: command_tag=ALTER SEQUENCE type=sequence identity=evttrig.id_col_d_seq
-NOTICE:  END: command_tag=ALTER TABLE type=table identity=evttrig.id
-ALTER TABLE evttrig.id ALTER COLUMN col_d DROP IDENTITY,
-  ALTER COLUMN col_d SET DATA TYPE int;
-NOTICE:  END: command_tag=ALTER TABLE type=table identity=evttrig.id
-DROP INDEX evttrig.one_idx;
-NOTICE:  NORMAL: orig=t normal=f istemp=f type=index identity=evttrig.one_idx name={evttrig,one_idx} args={}
-DROP SCHEMA evttrig CASCADE;
-NOTICE:  drop cascades to 4 other objects
-DETAIL:  drop cascades to table evttrig.one
-drop cascades to table evttrig.two
-drop cascades to table evttrig.id
-drop cascades to table evttrig.parted
-NOTICE:  NORMAL: orig=t normal=f istemp=f type=schema identity=evttrig name={evttrig} args={}
-NOTICE:  NORMAL: orig=f normal=t istemp=f type=table identity=evttrig.one name={evttrig,one} args={}
-NOTICE:  NORMAL: orig=f normal=t istemp=f type=sequence identity=evttrig.one_col_a_seq name={evttrig,one_col_a_seq} args={}
-NOTICE:  NORMAL: orig=f normal=t istemp=f type=default value identity=for evttrig.one.col_a name={evttrig,one,col_a} args={}
-NOTICE:  NORMAL: orig=f normal=t istemp=f type=table identity=evttrig.two name={evttrig,two} args={}
-NOTICE:  NORMAL: orig=f normal=t istemp=f type=table identity=evttrig.id name={evttrig,id} args={}
-NOTICE:  NORMAL: orig=f normal=t istemp=f type=table identity=evttrig.parted name={evttrig,parted} args={}
-NOTICE:  NORMAL: orig=f normal=t istemp=f type=table identity=evttrig.part_1_10 name={evttrig,part_1_10} args={}
-NOTICE:  NORMAL: orig=f normal=t istemp=f type=table identity=evttrig.part_10_20 name={evttrig,part_10_20} args={}
-NOTICE:  NORMAL: orig=f normal=t istemp=f type=table identity=evttrig.part_10_15 name={evttrig,part_10_15} args={}
-NOTICE:  NORMAL: orig=f normal=t istemp=f type=table identity=evttrig.part_15_20 name={evttrig,part_15_20} args={}
-DROP TABLE a_temp_tbl;
-NOTICE:  NORMAL: orig=t normal=f istemp=t type=table identity=pg_temp.a_temp_tbl name={pg_temp,a_temp_tbl} args={}
--- CREATE OPERATOR CLASS without FAMILY clause should report
--- both CREATE OPERATOR FAMILY and CREATE OPERATOR CLASS
-CREATE OPERATOR CLASS evttrigopclass FOR TYPE int USING btree AS STORAGE int;
-NOTICE:  END: command_tag=CREATE OPERATOR FAMILY type=operator family identity=public.evttrigopclass USING btree
-NOTICE:  END: command_tag=CREATE OPERATOR CLASS type=operator class identity=public.evttrigopclass USING btree
-DROP EVENT TRIGGER regress_event_trigger_report_dropped;
-DROP EVENT TRIGGER regress_event_trigger_report_end;
--- only allowed from within an event trigger function, should fail
-select pg_event_trigger_table_rewrite_oid();
-ERROR:  pg_event_trigger_table_rewrite_oid() can only be called in a table_rewrite event trigger function
--- test Table Rewrite Event Trigger
-CREATE OR REPLACE FUNCTION test_evtrig_no_rewrite() RETURNS event_trigger
-LANGUAGE plpgsql AS $$
-BEGIN
-  RAISE EXCEPTION 'rewrites not allowed';
-END;
-$$;
-create event trigger no_rewrite_allowed on table_rewrite
-  execute procedure test_evtrig_no_rewrite();
-create table rewriteme (id serial primary key, foo float, bar timestamptz);
-insert into rewriteme
-     select x * 1.001 from generate_series(1, 500) as t(x);
-alter table rewriteme alter column foo type numeric;
-ERROR:  rewrites not allowed
-CONTEXT:  PL/pgSQL function test_evtrig_no_rewrite() line 3 at RAISE
-alter table rewriteme add column baz int default 0;
--- test with more than one reason to rewrite a single table
-CREATE OR REPLACE FUNCTION test_evtrig_no_rewrite() RETURNS event_trigger
-LANGUAGE plpgsql AS $$
-BEGIN
-  RAISE NOTICE 'Table ''%'' is being rewritten (reason = %)',
-               pg_event_trigger_table_rewrite_oid()::regclass,
-               pg_event_trigger_table_rewrite_reason();
-END;
-$$;
-alter table rewriteme
- add column onemore int default 0,
- add column another int default -1,
- alter column foo type numeric(10,4);
-NOTICE:  Table 'rewriteme' is being rewritten (reason = 4)
--- matview rewrite when changing access method
-CREATE MATERIALIZED VIEW heapmv USING heap AS SELECT 1 AS a;
-ALTER MATERIALIZED VIEW heapmv SET ACCESS METHOD heap2;
-NOTICE:  Table 'heapmv' is being rewritten (reason = 8)
-DROP MATERIALIZED VIEW heapmv;
--- shouldn't trigger a table_rewrite event
-alter table rewriteme alter column foo type numeric(12,4);
-begin;
-set timezone to 'UTC';
-alter table rewriteme alter column bar type timestamp;
-set timezone to '0';
-alter table rewriteme alter column bar type timestamptz;
-set timezone to 'Europe/London';
-alter table rewriteme alter column bar type timestamp; -- does rewrite
-NOTICE:  Table 'rewriteme' is being rewritten (reason = 4)
-rollback;
--- typed tables are rewritten when their type changes.  Don't emit table
--- name, because firing order is not stable.
-CREATE OR REPLACE FUNCTION test_evtrig_no_rewrite() RETURNS event_trigger
-LANGUAGE plpgsql AS $$
-BEGIN
-  RAISE NOTICE 'Table is being rewritten (reason = %)',
-               pg_event_trigger_table_rewrite_reason();
-END;
-$$;
-create type rewritetype as (a int);
-create table rewritemetoo1 of rewritetype;
-create table rewritemetoo2 of rewritetype;
-alter type rewritetype alter attribute a type text cascade;
-NOTICE:  Table is being rewritten (reason = 4)
-NOTICE:  Table is being rewritten (reason = 4)
--- but this doesn't work
-create table rewritemetoo3 (a rewritetype);
-alter type rewritetype alter attribute a type varchar cascade;
-ERROR:  cannot alter type "rewritetype" because column "rewritemetoo3.a" uses it
-drop table rewriteme;
-drop event trigger no_rewrite_allowed;
-drop function test_evtrig_no_rewrite();
--- Tests for REINDEX
-CREATE OR REPLACE FUNCTION reindex_start_command()
-RETURNS event_trigger AS $$
-BEGIN
-    RAISE NOTICE 'REINDEX START: % %', tg_event, tg_tag;
-END;
-$$ LANGUAGE plpgsql;
-CREATE EVENT TRIGGER regress_reindex_start ON ddl_command_start
-    WHEN TAG IN ('REINDEX')
-    EXECUTE PROCEDURE reindex_start_command();
-CREATE FUNCTION reindex_end_command()
-RETURNS event_trigger AS $$
-DECLARE
-    obj record;
-BEGIN
-    FOR obj IN SELECT * FROM pg_event_trigger_ddl_commands()
-    LOOP
-        RAISE NOTICE 'REINDEX END: command_tag=% type=% identity=%',
-	    obj.command_tag, obj.object_type, obj.object_identity;
-    END LOOP;
-END;
-$$ LANGUAGE plpgsql;
-CREATE EVENT TRIGGER regress_reindex_end ON ddl_command_end
-    WHEN TAG IN ('REINDEX')
-    EXECUTE PROCEDURE reindex_end_command();
--- Extra event to force the use of a snapshot.
-CREATE FUNCTION reindex_end_command_snap() RETURNS EVENT_TRIGGER
-    AS $$ BEGIN PERFORM 1; END $$ LANGUAGE plpgsql;
-CREATE EVENT TRIGGER regress_reindex_end_snap ON ddl_command_end
-    EXECUTE FUNCTION reindex_end_command_snap();
--- With simple relation
-CREATE TABLE concur_reindex_tab (c1 int);
-CREATE INDEX concur_reindex_ind ON concur_reindex_tab (c1);
--- Both start and end triggers enabled.
-REINDEX INDEX concur_reindex_ind;
-NOTICE:  REINDEX START: ddl_command_start REINDEX
-NOTICE:  REINDEX END: command_tag=REINDEX type=index identity=public.concur_reindex_ind
-REINDEX TABLE concur_reindex_tab;
-NOTICE:  REINDEX START: ddl_command_start REINDEX
-NOTICE:  REINDEX END: command_tag=REINDEX type=index identity=public.concur_reindex_ind
-REINDEX INDEX CONCURRENTLY concur_reindex_ind;
-NOTICE:  REINDEX START: ddl_command_start REINDEX
-NOTICE:  REINDEX END: command_tag=REINDEX type=index identity=public.concur_reindex_ind
-REINDEX TABLE CONCURRENTLY concur_reindex_tab;
-NOTICE:  REINDEX START: ddl_command_start REINDEX
-NOTICE:  REINDEX END: command_tag=REINDEX type=index identity=public.concur_reindex_ind
--- with start trigger disabled.
-ALTER EVENT TRIGGER regress_reindex_start DISABLE;
-REINDEX INDEX concur_reindex_ind;
-NOTICE:  REINDEX END: command_tag=REINDEX type=index identity=public.concur_reindex_ind
-REINDEX INDEX CONCURRENTLY concur_reindex_ind;
-NOTICE:  REINDEX END: command_tag=REINDEX type=index identity=public.concur_reindex_ind
--- without an index
-DROP INDEX concur_reindex_ind;
-REINDEX TABLE concur_reindex_tab;
-NOTICE:  table "concur_reindex_tab" has no indexes to reindex
-REINDEX TABLE CONCURRENTLY concur_reindex_tab;
-NOTICE:  table "concur_reindex_tab" has no indexes that can be reindexed concurrently
--- With a Schema
-CREATE SCHEMA concur_reindex_schema;
--- No indexes
-REINDEX SCHEMA concur_reindex_schema;
-REINDEX SCHEMA CONCURRENTLY concur_reindex_schema;
-CREATE TABLE concur_reindex_schema.tab (a int);
-CREATE INDEX ind ON concur_reindex_schema.tab (a);
--- One index reported
-REINDEX SCHEMA concur_reindex_schema;
-NOTICE:  REINDEX END: command_tag=REINDEX type=index identity=concur_reindex_schema.ind
-REINDEX SCHEMA CONCURRENTLY concur_reindex_schema;
-NOTICE:  REINDEX END: command_tag=REINDEX type=index identity=concur_reindex_schema.ind
--- One table on schema but no indexes
-DROP INDEX concur_reindex_schema.ind;
-REINDEX SCHEMA concur_reindex_schema;
-REINDEX SCHEMA CONCURRENTLY concur_reindex_schema;
-DROP SCHEMA concur_reindex_schema CASCADE;
-NOTICE:  drop cascades to table concur_reindex_schema.tab
--- With a partitioned table, and nothing else.
-CREATE TABLE concur_reindex_part (id int) PARTITION BY RANGE (id);
-REINDEX TABLE concur_reindex_part;
-REINDEX TABLE CONCURRENTLY concur_reindex_part;
--- Partition that would be reindexed, still nothing.
-CREATE TABLE concur_reindex_child PARTITION OF concur_reindex_part
-  FOR VALUES FROM (0) TO (10);
-REINDEX TABLE concur_reindex_part;
-REINDEX TABLE CONCURRENTLY concur_reindex_part;
--- Now add some indexes.
-CREATE INDEX concur_reindex_partidx ON concur_reindex_part (id);
-REINDEX INDEX concur_reindex_partidx;
-NOTICE:  REINDEX END: command_tag=REINDEX type=index identity=public.concur_reindex_child_id_idx
-REINDEX INDEX CONCURRENTLY concur_reindex_partidx;
-NOTICE:  REINDEX END: command_tag=REINDEX type=index identity=public.concur_reindex_child_id_idx
-REINDEX TABLE concur_reindex_part;
-NOTICE:  REINDEX END: command_tag=REINDEX type=index identity=public.concur_reindex_child_id_idx
-REINDEX TABLE CONCURRENTLY concur_reindex_part;
-NOTICE:  REINDEX END: command_tag=REINDEX type=index identity=public.concur_reindex_child_id_idx
-DROP TABLE concur_reindex_part;
--- Clean up
-DROP EVENT TRIGGER regress_reindex_start;
-DROP EVENT TRIGGER regress_reindex_end;
-DROP EVENT TRIGGER regress_reindex_end_snap;
-DROP FUNCTION reindex_end_command();
-DROP FUNCTION reindex_end_command_snap();
-DROP FUNCTION reindex_start_command();
-DROP TABLE concur_reindex_tab;
--- test Row Security Event Trigger
-RESET SESSION AUTHORIZATION;
-CREATE TABLE event_trigger_test (a integer, b text);
-CREATE OR REPLACE FUNCTION start_command()
-RETURNS event_trigger AS $$
-BEGIN
-RAISE NOTICE '% - ddl_command_start', tg_tag;
-END;
-$$ LANGUAGE plpgsql;
-CREATE OR REPLACE FUNCTION end_command()
-RETURNS event_trigger AS $$
-BEGIN
-RAISE NOTICE '% - ddl_command_end', tg_tag;
-END;
-$$ LANGUAGE plpgsql;
-CREATE OR REPLACE FUNCTION drop_sql_command()
-RETURNS event_trigger AS $$
-BEGIN
-RAISE NOTICE '% - sql_drop', tg_tag;
-END;
-$$ LANGUAGE plpgsql;
-CREATE EVENT TRIGGER start_rls_command ON ddl_command_start
-    WHEN TAG IN ('CREATE POLICY', 'ALTER POLICY', 'DROP POLICY') EXECUTE PROCEDURE start_command();
-CREATE EVENT TRIGGER end_rls_command ON ddl_command_end
-    WHEN TAG IN ('CREATE POLICY', 'ALTER POLICY', 'DROP POLICY') EXECUTE PROCEDURE end_command();
-CREATE EVENT TRIGGER sql_drop_command ON sql_drop
-    WHEN TAG IN ('DROP POLICY') EXECUTE PROCEDURE drop_sql_command();
-CREATE POLICY p1 ON event_trigger_test USING (FALSE);
-NOTICE:  CREATE POLICY - ddl_command_start
-NOTICE:  CREATE POLICY - ddl_command_end
-ALTER POLICY p1 ON event_trigger_test USING (TRUE);
-NOTICE:  ALTER POLICY - ddl_command_start
-NOTICE:  ALTER POLICY - ddl_command_end
-ALTER POLICY p1 ON event_trigger_test RENAME TO p2;
-NOTICE:  ALTER POLICY - ddl_command_start
-NOTICE:  ALTER POLICY - ddl_command_end
-DROP POLICY p2 ON event_trigger_test;
-NOTICE:  DROP POLICY - ddl_command_start
-NOTICE:  DROP POLICY - sql_drop
-NOTICE:  DROP POLICY - ddl_command_end
--- Check the object addresses of all the event triggers.
-SELECT
-    e.evtname,
-    pg_describe_object('pg_event_trigger'::regclass, e.oid, 0) as descr,
-    b.type, b.object_names, b.object_args,
-    pg_identify_object(a.classid, a.objid, a.objsubid) as ident
-  FROM pg_event_trigger as e,
-    LATERAL pg_identify_object_as_address('pg_event_trigger'::regclass, e.oid, 0) as b,
-    LATERAL pg_get_object_address(b.type, b.object_names, b.object_args) as a
-  ORDER BY e.evtname;
-      evtname      |              descr              |     type      |    object_names     | object_args |                         ident                          
--------------------+---------------------------------+---------------+---------------------+-------------+--------------------------------------------------------
- end_rls_command   | event trigger end_rls_command   | event trigger | {end_rls_command}   | {}          | ("event trigger",,end_rls_command,end_rls_command)
- sql_drop_command  | event trigger sql_drop_command  | event trigger | {sql_drop_command}  | {}          | ("event trigger",,sql_drop_command,sql_drop_command)
- start_rls_command | event trigger start_rls_command | event trigger | {start_rls_command} | {}          | ("event trigger",,start_rls_command,start_rls_command)
-(3 rows)
-
-DROP EVENT TRIGGER start_rls_command;
-DROP EVENT TRIGGER end_rls_command;
-DROP EVENT TRIGGER sql_drop_command;
--- Check the GUC for disabling event triggers
-CREATE FUNCTION test_event_trigger_guc() RETURNS event_trigger
-LANGUAGE plpgsql AS $$
-DECLARE
-	obj record;
-BEGIN
-	FOR obj IN SELECT * FROM pg_event_trigger_dropped_objects()
-	LOOP
-		RAISE NOTICE '% dropped %', tg_tag, obj.object_type;
-	END LOOP;
-END;
-$$;
-CREATE EVENT TRIGGER test_event_trigger_guc
-	ON sql_drop
-	WHEN TAG IN ('DROP POLICY') EXECUTE FUNCTION test_event_trigger_guc();
-SET event_triggers = 'on';
-CREATE POLICY pguc ON event_trigger_test USING (FALSE);
-DROP POLICY pguc ON event_trigger_test;
-NOTICE:  DROP POLICY dropped policy
-CREATE POLICY pguc ON event_trigger_test USING (FALSE);
-SET event_triggers = 'off';
-DROP POLICY pguc ON event_trigger_test;
+psql: error: connection to server on socket "/tmp/f_SDOOqtof/.s.PGSQL.16412" failed: No such file or directory
+	Is the server running locally and accepting connections on that socket?
diff -U3 /tmp/cirrus-ci-build/src/test/regress/expected/event_trigger_login.out /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/event_trigger_login.out
--- /tmp/cirrus-ci-build/src/test/regress/expected/event_trigger_login.out	2024-09-20 04:07:19.010721357 +0000
+++ /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/event_trigger_login.out	2024-09-20 04:17:09.273564610 +0000
@@ -1,39 +1,2 @@
--- Login event triggers
-CREATE TABLE user_logins(id serial, who text);
-GRANT SELECT ON user_logins TO public;
-CREATE FUNCTION on_login_proc() RETURNS event_trigger AS $$
-BEGIN
-  INSERT INTO user_logins (who) VALUES (SESSION_USER);
-  RAISE NOTICE 'You are welcome!';
-END;
-$$ LANGUAGE plpgsql;
-CREATE EVENT TRIGGER on_login_trigger ON login EXECUTE PROCEDURE on_login_proc();
-ALTER EVENT TRIGGER on_login_trigger ENABLE ALWAYS;
-\c
-NOTICE:  You are welcome!
-SELECT COUNT(*) FROM user_logins;
- count 
--------
-     1
-(1 row)
-
-\c
-NOTICE:  You are welcome!
-SELECT COUNT(*) FROM user_logins;
- count 
--------
-     2
-(1 row)
-
--- Check dathasloginevt in system catalog
-SELECT dathasloginevt FROM pg_database WHERE datname= :'DBNAME';
- dathasloginevt 
-----------------
- t
-(1 row)
-
--- Cleanup
-DROP TABLE user_logins;
-DROP EVENT TRIGGER on_login_trigger;
-DROP FUNCTION on_login_proc();
-\c
+psql: error: connection to server on socket "/tmp/f_SDOOqtof/.s.PGSQL.16412" failed: No such file or directory
+	Is the server running locally and accepting connections on that socket?
diff -U3 /tmp/cirrus-ci-build/src/test/regress/expected/fast_default.out /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/fast_default.out
--- /tmp/cirrus-ci-build/src/test/regress/expected/fast_default.out	2024-09-20 04:07:19.014729651 +0000
+++ /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/fast_default.out	2024-09-20 04:17:09.293564591 +0000
@@ -1,861 +1,2 @@
---
--- ALTER TABLE ADD COLUMN DEFAULT test
---
-SET search_path = fast_default;
-CREATE SCHEMA fast_default;
-CREATE TABLE m(id OID);
-INSERT INTO m VALUES (NULL::OID);
-CREATE FUNCTION set(tabname name) RETURNS VOID
-AS $$
-BEGIN
-  UPDATE m
-  SET id = (SELECT c.relfilenode
-            FROM pg_class AS c, pg_namespace AS s
-            WHERE c.relname = tabname
-                AND c.relnamespace = s.oid
-                AND s.nspname = 'fast_default');
-END;
-$$ LANGUAGE 'plpgsql';
-CREATE FUNCTION comp() RETURNS TEXT
-AS $$
-BEGIN
-  RETURN (SELECT CASE
-               WHEN m.id = c.relfilenode THEN 'Unchanged'
-               ELSE 'Rewritten'
-               END
-           FROM m, pg_class AS c, pg_namespace AS s
-           WHERE c.relname = 't'
-               AND c.relnamespace = s.oid
-               AND s.nspname = 'fast_default');
-END;
-$$ LANGUAGE 'plpgsql';
-CREATE FUNCTION log_rewrite() RETURNS event_trigger
-LANGUAGE plpgsql as
-$func$
-
-declare
-   this_schema text;
-begin
-    select into this_schema relnamespace::regnamespace::text
-    from pg_class
-    where oid = pg_event_trigger_table_rewrite_oid();
-    if this_schema = 'fast_default'
-    then
-        RAISE NOTICE 'rewriting table % for reason %',
-          pg_event_trigger_table_rewrite_oid()::regclass,
-          pg_event_trigger_table_rewrite_reason();
-    end if;
-end;
-$func$;
-CREATE TABLE has_volatile AS
-SELECT * FROM generate_series(1,10) id;
-CREATE EVENT TRIGGER has_volatile_rewrite
-                  ON table_rewrite
-   EXECUTE PROCEDURE log_rewrite();
--- only the last of these should trigger a rewrite
-ALTER TABLE has_volatile ADD col1 int;
-ALTER TABLE has_volatile ADD col2 int DEFAULT 1;
-ALTER TABLE has_volatile ADD col3 timestamptz DEFAULT current_timestamp;
-ALTER TABLE has_volatile ADD col4 int DEFAULT (random() * 10000)::int;
-NOTICE:  rewriting table has_volatile for reason 2
--- Test a large sample of different datatypes
-CREATE TABLE T(pk INT NOT NULL PRIMARY KEY, c_int INT DEFAULT 1);
-SELECT set('t');
- set 
------
- 
-(1 row)
-
-INSERT INTO T VALUES (1), (2);
-ALTER TABLE T ADD COLUMN c_bpchar BPCHAR(5) DEFAULT 'hello',
-              ALTER COLUMN c_int SET DEFAULT 2;
-INSERT INTO T VALUES (3), (4);
-ALTER TABLE T ADD COLUMN c_text TEXT  DEFAULT 'world',
-              ALTER COLUMN c_bpchar SET DEFAULT 'dog';
-INSERT INTO T VALUES (5), (6);
-ALTER TABLE T ADD COLUMN c_date DATE DEFAULT '2016-06-02',
-              ALTER COLUMN c_text SET DEFAULT 'cat';
-INSERT INTO T VALUES (7), (8);
-ALTER TABLE T ADD COLUMN c_timestamp TIMESTAMP DEFAULT '2016-09-01 12:00:00',
-              ADD COLUMN c_timestamp_null TIMESTAMP,
-              ALTER COLUMN c_date SET DEFAULT '2010-01-01';
-INSERT INTO T VALUES (9), (10);
-ALTER TABLE T ADD COLUMN c_array TEXT[]
-                  DEFAULT '{"This", "is", "the", "real", "world"}',
-              ALTER COLUMN c_timestamp SET DEFAULT '1970-12-31 11:12:13',
-              ALTER COLUMN c_timestamp_null SET DEFAULT '2016-09-29 12:00:00';
-INSERT INTO T VALUES (11), (12);
-ALTER TABLE T ADD COLUMN c_small SMALLINT DEFAULT -5,
-              ADD COLUMN c_small_null SMALLINT,
-              ALTER COLUMN c_array
-                  SET DEFAULT '{"This", "is", "no", "fantasy"}';
-INSERT INTO T VALUES (13), (14);
-ALTER TABLE T ADD COLUMN c_big BIGINT DEFAULT 180000000000018,
-              ALTER COLUMN c_small SET DEFAULT 9,
-              ALTER COLUMN c_small_null SET DEFAULT 13;
-INSERT INTO T VALUES (15), (16);
-ALTER TABLE T ADD COLUMN c_num NUMERIC DEFAULT 1.00000000001,
-              ALTER COLUMN c_big SET DEFAULT -9999999999999999;
-INSERT INTO T VALUES (17), (18);
-ALTER TABLE T ADD COLUMN c_time TIME DEFAULT '12:00:00',
-              ALTER COLUMN c_num SET DEFAULT 2.000000000000002;
-INSERT INTO T VALUES (19), (20);
-ALTER TABLE T ADD COLUMN c_interval INTERVAL DEFAULT '1 day',
-              ALTER COLUMN c_time SET DEFAULT '23:59:59';
-INSERT INTO T VALUES (21), (22);
-ALTER TABLE T ADD COLUMN c_hugetext TEXT DEFAULT repeat('abcdefg',1000),
-              ALTER COLUMN c_interval SET DEFAULT '3 hours';
-INSERT INTO T VALUES (23), (24);
-ALTER TABLE T ALTER COLUMN c_interval DROP DEFAULT,
-              ALTER COLUMN c_hugetext SET DEFAULT repeat('poiuyt', 1000);
-INSERT INTO T VALUES (25), (26);
-ALTER TABLE T ALTER COLUMN c_bpchar    DROP DEFAULT,
-              ALTER COLUMN c_date      DROP DEFAULT,
-              ALTER COLUMN c_text      DROP DEFAULT,
-              ALTER COLUMN c_timestamp DROP DEFAULT,
-              ALTER COLUMN c_array     DROP DEFAULT,
-              ALTER COLUMN c_small     DROP DEFAULT,
-              ALTER COLUMN c_big       DROP DEFAULT,
-              ALTER COLUMN c_num       DROP DEFAULT,
-              ALTER COLUMN c_time      DROP DEFAULT,
-              ALTER COLUMN c_hugetext  DROP DEFAULT;
-INSERT INTO T VALUES (27), (28);
-SELECT pk, c_int, c_bpchar, c_text, c_date, c_timestamp,
-       c_timestamp_null, c_array, c_small, c_small_null,
-       c_big, c_num, c_time, c_interval,
-       c_hugetext = repeat('abcdefg',1000) as c_hugetext_origdef,
-       c_hugetext = repeat('poiuyt', 1000) as c_hugetext_newdef
-FROM T ORDER BY pk;
- pk | c_int | c_bpchar | c_text |   c_date   |       c_timestamp        |     c_timestamp_null     |         c_array          | c_small | c_small_null |       c_big       |       c_num       |  c_time  | c_interval | c_hugetext_origdef | c_hugetext_newdef 
-----+-------+----------+--------+------------+--------------------------+--------------------------+--------------------------+---------+--------------+-------------------+-------------------+----------+------------+--------------------+-------------------
-  1 |     1 | hello    | world  | 06-02-2016 | Thu Sep 01 12:00:00 2016 |                          | {This,is,the,real,world} |      -5 |              |   180000000000018 |     1.00000000001 | 12:00:00 | @ 1 day    | t                  | f
-  2 |     1 | hello    | world  | 06-02-2016 | Thu Sep 01 12:00:00 2016 |                          | {This,is,the,real,world} |      -5 |              |   180000000000018 |     1.00000000001 | 12:00:00 | @ 1 day    | t                  | f
-  3 |     2 | hello    | world  | 06-02-2016 | Thu Sep 01 12:00:00 2016 |                          | {This,is,the,real,world} |      -5 |              |   180000000000018 |     1.00000000001 | 12:00:00 | @ 1 day    | t                  | f
-  4 |     2 | hello    | world  | 06-02-2016 | Thu Sep 01 12:00:00 2016 |                          | {This,is,the,real,world} |      -5 |              |   180000000000018 |     1.00000000001 | 12:00:00 | @ 1 day    | t                  | f
-  5 |     2 | dog      | world  | 06-02-2016 | Thu Sep 01 12:00:00 2016 |                          | {This,is,the,real,world} |      -5 |              |   180000000000018 |     1.00000000001 | 12:00:00 | @ 1 day    | t                  | f
-  6 |     2 | dog      | world  | 06-02-2016 | Thu Sep 01 12:00:00 2016 |                          | {This,is,the,real,world} |      -5 |              |   180000000000018 |     1.00000000001 | 12:00:00 | @ 1 day    | t                  | f
-  7 |     2 | dog      | cat    | 06-02-2016 | Thu Sep 01 12:00:00 2016 |                          | {This,is,the,real,world} |      -5 |              |   180000000000018 |     1.00000000001 | 12:00:00 | @ 1 day    | t                  | f
-  8 |     2 | dog      | cat    | 06-02-2016 | Thu Sep 01 12:00:00 2016 |                          | {This,is,the,real,world} |      -5 |              |   180000000000018 |     1.00000000001 | 12:00:00 | @ 1 day    | t                  | f
-  9 |     2 | dog      | cat    | 01-01-2010 | Thu Sep 01 12:00:00 2016 |                          | {This,is,the,real,world} |      -5 |              |   180000000000018 |     1.00000000001 | 12:00:00 | @ 1 day    | t                  | f
- 10 |     2 | dog      | cat    | 01-01-2010 | Thu Sep 01 12:00:00 2016 |                          | {This,is,the,real,world} |      -5 |              |   180000000000018 |     1.00000000001 | 12:00:00 | @ 1 day    | t                  | f
- 11 |     2 | dog      | cat    | 01-01-2010 | Thu Dec 31 11:12:13 1970 | Thu Sep 29 12:00:00 2016 | {This,is,the,real,world} |      -5 |              |   180000000000018 |     1.00000000001 | 12:00:00 | @ 1 day    | t                  | f
- 12 |     2 | dog      | cat    | 01-01-2010 | Thu Dec 31 11:12:13 1970 | Thu Sep 29 12:00:00 2016 | {This,is,the,real,world} |      -5 |              |   180000000000018 |     1.00000000001 | 12:00:00 | @ 1 day    | t                  | f
- 13 |     2 | dog      | cat    | 01-01-2010 | Thu Dec 31 11:12:13 1970 | Thu Sep 29 12:00:00 2016 | {This,is,no,fantasy}     |      -5 |              |   180000000000018 |     1.00000000001 | 12:00:00 | @ 1 day    | t                  | f
- 14 |     2 | dog      | cat    | 01-01-2010 | Thu Dec 31 11:12:13 1970 | Thu Sep 29 12:00:00 2016 | {This,is,no,fantasy}     |      -5 |              |   180000000000018 |     1.00000000001 | 12:00:00 | @ 1 day    | t                  | f
- 15 |     2 | dog      | cat    | 01-01-2010 | Thu Dec 31 11:12:13 1970 | Thu Sep 29 12:00:00 2016 | {This,is,no,fantasy}     |       9 |           13 |   180000000000018 |     1.00000000001 | 12:00:00 | @ 1 day    | t                  | f
- 16 |     2 | dog      | cat    | 01-01-2010 | Thu Dec 31 11:12:13 1970 | Thu Sep 29 12:00:00 2016 | {This,is,no,fantasy}     |       9 |           13 |   180000000000018 |     1.00000000001 | 12:00:00 | @ 1 day    | t                  | f
- 17 |     2 | dog      | cat    | 01-01-2010 | Thu Dec 31 11:12:13 1970 | Thu Sep 29 12:00:00 2016 | {This,is,no,fantasy}     |       9 |           13 | -9999999999999999 |     1.00000000001 | 12:00:00 | @ 1 day    | t                  | f
- 18 |     2 | dog      | cat    | 01-01-2010 | Thu Dec 31 11:12:13 1970 | Thu Sep 29 12:00:00 2016 | {This,is,no,fantasy}     |       9 |           13 | -9999999999999999 |     1.00000000001 | 12:00:00 | @ 1 day    | t                  | f
- 19 |     2 | dog      | cat    | 01-01-2010 | Thu Dec 31 11:12:13 1970 | Thu Sep 29 12:00:00 2016 | {This,is,no,fantasy}     |       9 |           13 | -9999999999999999 | 2.000000000000002 | 12:00:00 | @ 1 day    | t                  | f
- 20 |     2 | dog      | cat    | 01-01-2010 | Thu Dec 31 11:12:13 1970 | Thu Sep 29 12:00:00 2016 | {This,is,no,fantasy}     |       9 |           13 | -9999999999999999 | 2.000000000000002 | 12:00:00 | @ 1 day    | t                  | f
- 21 |     2 | dog      | cat    | 01-01-2010 | Thu Dec 31 11:12:13 1970 | Thu Sep 29 12:00:00 2016 | {This,is,no,fantasy}     |       9 |           13 | -9999999999999999 | 2.000000000000002 | 23:59:59 | @ 1 day    | t                  | f
- 22 |     2 | dog      | cat    | 01-01-2010 | Thu Dec 31 11:12:13 1970 | Thu Sep 29 12:00:00 2016 | {This,is,no,fantasy}     |       9 |           13 | -9999999999999999 | 2.000000000000002 | 23:59:59 | @ 1 day    | t                  | f
- 23 |     2 | dog      | cat    | 01-01-2010 | Thu Dec 31 11:12:13 1970 | Thu Sep 29 12:00:00 2016 | {This,is,no,fantasy}     |       9 |           13 | -9999999999999999 | 2.000000000000002 | 23:59:59 | @ 3 hours  | t                  | f
- 24 |     2 | dog      | cat    | 01-01-2010 | Thu Dec 31 11:12:13 1970 | Thu Sep 29 12:00:00 2016 | {This,is,no,fantasy}     |       9 |           13 | -9999999999999999 | 2.000000000000002 | 23:59:59 | @ 3 hours  | t                  | f
- 25 |     2 | dog      | cat    | 01-01-2010 | Thu Dec 31 11:12:13 1970 | Thu Sep 29 12:00:00 2016 | {This,is,no,fantasy}     |       9 |           13 | -9999999999999999 | 2.000000000000002 | 23:59:59 |            | f                  | t
- 26 |     2 | dog      | cat    | 01-01-2010 | Thu Dec 31 11:12:13 1970 | Thu Sep 29 12:00:00 2016 | {This,is,no,fantasy}     |       9 |           13 | -9999999999999999 | 2.000000000000002 | 23:59:59 |            | f                  | t
- 27 |     2 |          |        |            |                          | Thu Sep 29 12:00:00 2016 |                          |         |           13 |                   |                   |          |            |                    | 
- 28 |     2 |          |        |            |                          | Thu Sep 29 12:00:00 2016 |                          |         |           13 |                   |                   |          |            |                    | 
-(28 rows)
-
-SELECT comp();
-   comp    
------------
- Unchanged
-(1 row)
-
-DROP TABLE T;
--- Test expressions in the defaults
-CREATE OR REPLACE FUNCTION foo(a INT) RETURNS TEXT AS $$
-DECLARE res TEXT := '';
-        i INT;
-BEGIN
-  i := 0;
-  WHILE (i < a) LOOP
-    res := res || chr(ascii('a') + i);
-    i := i + 1;
-  END LOOP;
-  RETURN res;
-END; $$ LANGUAGE PLPGSQL STABLE;
-CREATE TABLE T(pk INT NOT NULL PRIMARY KEY, c_int INT DEFAULT LENGTH(foo(6)));
-SELECT set('t');
- set 
------
- 
-(1 row)
-
-INSERT INTO T VALUES (1), (2);
-ALTER TABLE T ADD COLUMN c_bpchar BPCHAR(5) DEFAULT foo(4),
-              ALTER COLUMN c_int SET DEFAULT LENGTH(foo(8));
-INSERT INTO T VALUES (3), (4);
-ALTER TABLE T ADD COLUMN c_text TEXT  DEFAULT foo(6),
-              ALTER COLUMN c_bpchar SET DEFAULT foo(3);
-INSERT INTO T VALUES (5), (6);
-ALTER TABLE T ADD COLUMN c_date DATE
-                  DEFAULT '2016-06-02'::DATE  + LENGTH(foo(10)),
-              ALTER COLUMN c_text SET DEFAULT foo(12);
-INSERT INTO T VALUES (7), (8);
-ALTER TABLE T ADD COLUMN c_timestamp TIMESTAMP
-                  DEFAULT '2016-09-01'::DATE + LENGTH(foo(10)),
-              ALTER COLUMN c_date
-                  SET DEFAULT '2010-01-01'::DATE - LENGTH(foo(4));
-INSERT INTO T VALUES (9), (10);
-ALTER TABLE T ADD COLUMN c_array TEXT[]
-                  DEFAULT ('{"This", "is", "' || foo(4) ||
-                           '","the", "real", "world"}')::TEXT[],
-              ALTER COLUMN c_timestamp
-                  SET DEFAULT '1970-12-31'::DATE + LENGTH(foo(30));
-INSERT INTO T VALUES (11), (12);
-ALTER TABLE T ALTER COLUMN c_int DROP DEFAULT,
-              ALTER COLUMN c_array
-                  SET DEFAULT ('{"This", "is", "' || foo(1) ||
-                               '", "fantasy"}')::text[];
-INSERT INTO T VALUES (13), (14);
-ALTER TABLE T ALTER COLUMN c_bpchar    DROP DEFAULT,
-              ALTER COLUMN c_date      DROP DEFAULT,
-              ALTER COLUMN c_text      DROP DEFAULT,
-              ALTER COLUMN c_timestamp DROP DEFAULT,
-              ALTER COLUMN c_array     DROP DEFAULT;
-INSERT INTO T VALUES (15), (16);
-SELECT * FROM T;
- pk | c_int | c_bpchar |    c_text    |   c_date   |       c_timestamp        |            c_array            
-----+-------+----------+--------------+------------+--------------------------+-------------------------------
-  1 |     6 | abcd     | abcdef       | 06-12-2016 | Sun Sep 11 00:00:00 2016 | {This,is,abcd,the,real,world}
-  2 |     6 | abcd     | abcdef       | 06-12-2016 | Sun Sep 11 00:00:00 2016 | {This,is,abcd,the,real,world}
-  3 |     8 | abcd     | abcdef       | 06-12-2016 | Sun Sep 11 00:00:00 2016 | {This,is,abcd,the,real,world}
-  4 |     8 | abcd     | abcdef       | 06-12-2016 | Sun Sep 11 00:00:00 2016 | {This,is,abcd,the,real,world}
-  5 |     8 | abc      | abcdef       | 06-12-2016 | Sun Sep 11 00:00:00 2016 | {This,is,abcd,the,real,world}
-  6 |     8 | abc      | abcdef       | 06-12-2016 | Sun Sep 11 00:00:00 2016 | {This,is,abcd,the,real,world}
-  7 |     8 | abc      | abcdefghijkl | 06-12-2016 | Sun Sep 11 00:00:00 2016 | {This,is,abcd,the,real,world}
-  8 |     8 | abc      | abcdefghijkl | 06-12-2016 | Sun Sep 11 00:00:00 2016 | {This,is,abcd,the,real,world}
-  9 |     8 | abc      | abcdefghijkl | 12-28-2009 | Sun Sep 11 00:00:00 2016 | {This,is,abcd,the,real,world}
- 10 |     8 | abc      | abcdefghijkl | 12-28-2009 | Sun Sep 11 00:00:00 2016 | {This,is,abcd,the,real,world}
- 11 |     8 | abc      | abcdefghijkl | 12-28-2009 | Sat Jan 30 00:00:00 1971 | {This,is,abcd,the,real,world}
- 12 |     8 | abc      | abcdefghijkl | 12-28-2009 | Sat Jan 30 00:00:00 1971 | {This,is,abcd,the,real,world}
- 13 |       | abc      | abcdefghijkl | 12-28-2009 | Sat Jan 30 00:00:00 1971 | {This,is,a,fantasy}
- 14 |       | abc      | abcdefghijkl | 12-28-2009 | Sat Jan 30 00:00:00 1971 | {This,is,a,fantasy}
- 15 |       |          |              |            |                          | 
- 16 |       |          |              |            |                          | 
-(16 rows)
-
-SELECT comp();
-   comp    
------------
- Unchanged
-(1 row)
-
-DROP TABLE T;
-DROP FUNCTION foo(INT);
--- Fall back to full rewrite for volatile expressions
-CREATE TABLE T(pk INT NOT NULL PRIMARY KEY);
-INSERT INTO T VALUES (1);
-SELECT set('t');
- set 
------
- 
-(1 row)
-
--- now() is stable, because it returns the transaction timestamp
-ALTER TABLE T ADD COLUMN c1 TIMESTAMP DEFAULT now();
-SELECT comp();
-   comp    
------------
- Unchanged
-(1 row)
-
--- clock_timestamp() is volatile
-ALTER TABLE T ADD COLUMN c2 TIMESTAMP DEFAULT clock_timestamp();
-NOTICE:  rewriting table t for reason 2
-SELECT comp();
-   comp    
------------
- Rewritten
-(1 row)
-
--- check that we notice insertion of a volatile default argument
-CREATE FUNCTION foolme(timestamptz DEFAULT clock_timestamp())
-  RETURNS timestamptz
-  IMMUTABLE AS 'select $1' LANGUAGE sql;
-ALTER TABLE T ADD COLUMN c3 timestamptz DEFAULT foolme();
-NOTICE:  rewriting table t for reason 2
-SELECT attname, atthasmissing, attmissingval FROM pg_attribute
-  WHERE attrelid = 't'::regclass AND attnum > 0
-  ORDER BY attnum;
- attname | atthasmissing | attmissingval 
----------+---------------+---------------
- pk      | f             | 
- c1      | f             | 
- c2      | f             | 
- c3      | f             | 
-(4 rows)
-
-DROP TABLE T;
-DROP FUNCTION foolme(timestamptz);
--- Simple querie
-CREATE TABLE T (pk INT NOT NULL PRIMARY KEY);
-SELECT set('t');
- set 
------
- 
-(1 row)
-
-INSERT INTO T SELECT * FROM generate_series(1, 10) a;
-ALTER TABLE T ADD COLUMN c_bigint BIGINT NOT NULL DEFAULT -1;
-INSERT INTO T SELECT b, b - 10 FROM generate_series(11, 20) a(b);
-ALTER TABLE T ADD COLUMN c_text TEXT DEFAULT 'hello';
-INSERT INTO T SELECT b, b - 10, (b + 10)::text FROM generate_series(21, 30) a(b);
--- WHERE clause
-SELECT c_bigint, c_text FROM T WHERE c_bigint = -1 LIMIT 1;
- c_bigint | c_text 
-----------+--------
-       -1 | hello
-(1 row)
-
-EXPLAIN (VERBOSE TRUE, COSTS FALSE)
-SELECT c_bigint, c_text FROM T WHERE c_bigint = -1 LIMIT 1;
-                  QUERY PLAN                  
-----------------------------------------------
- Limit
-   Output: c_bigint, c_text
-   ->  Seq Scan on fast_default.t
-         Output: c_bigint, c_text
-         Filter: (t.c_bigint = '-1'::integer)
-(5 rows)
-
-SELECT c_bigint, c_text FROM T WHERE c_text = 'hello' LIMIT 1;
- c_bigint | c_text 
-----------+--------
-       -1 | hello
-(1 row)
-
-EXPLAIN (VERBOSE TRUE, COSTS FALSE) SELECT c_bigint, c_text FROM T WHERE c_text = 'hello' LIMIT 1;
-                 QUERY PLAN                 
---------------------------------------------
- Limit
-   Output: c_bigint, c_text
-   ->  Seq Scan on fast_default.t
-         Output: c_bigint, c_text
-         Filter: (t.c_text = 'hello'::text)
-(5 rows)
-
--- COALESCE
-SELECT COALESCE(c_bigint, pk), COALESCE(c_text, pk::text)
-FROM T
-ORDER BY pk LIMIT 10;
- coalesce | coalesce 
-----------+----------
-       -1 | hello
-       -1 | hello
-       -1 | hello
-       -1 | hello
-       -1 | hello
-       -1 | hello
-       -1 | hello
-       -1 | hello
-       -1 | hello
-       -1 | hello
-(10 rows)
-
--- Aggregate function
-SELECT SUM(c_bigint), MAX(c_text COLLATE "C" ), MIN(c_text COLLATE "C") FROM T;
- sum |  max  | min 
------+-------+-----
- 200 | hello | 31
-(1 row)
-
--- ORDER BY
-SELECT * FROM T ORDER BY c_bigint, c_text, pk LIMIT 10;
- pk | c_bigint | c_text 
-----+----------+--------
-  1 |       -1 | hello
-  2 |       -1 | hello
-  3 |       -1 | hello
-  4 |       -1 | hello
-  5 |       -1 | hello
-  6 |       -1 | hello
-  7 |       -1 | hello
-  8 |       -1 | hello
-  9 |       -1 | hello
- 10 |       -1 | hello
-(10 rows)
-
-EXPLAIN (VERBOSE TRUE, COSTS FALSE)
-SELECT * FROM T ORDER BY c_bigint, c_text, pk LIMIT 10;
-                  QUERY PLAN                  
-----------------------------------------------
- Limit
-   Output: pk, c_bigint, c_text
-   ->  Sort
-         Output: pk, c_bigint, c_text
-         Sort Key: t.c_bigint, t.c_text, t.pk
-         ->  Seq Scan on fast_default.t
-               Output: pk, c_bigint, c_text
-(7 rows)
-
--- LIMIT
-SELECT * FROM T WHERE c_bigint > -1 ORDER BY c_bigint, c_text, pk LIMIT 10;
- pk | c_bigint | c_text 
-----+----------+--------
- 11 |        1 | hello
- 12 |        2 | hello
- 13 |        3 | hello
- 14 |        4 | hello
- 15 |        5 | hello
- 16 |        6 | hello
- 17 |        7 | hello
- 18 |        8 | hello
- 19 |        9 | hello
- 20 |       10 | hello
-(10 rows)
-
-EXPLAIN (VERBOSE TRUE, COSTS FALSE)
-SELECT * FROM T WHERE c_bigint > -1 ORDER BY c_bigint, c_text, pk LIMIT 10;
-                     QUERY PLAN                     
-----------------------------------------------------
- Limit
-   Output: pk, c_bigint, c_text
-   ->  Sort
-         Output: pk, c_bigint, c_text
-         Sort Key: t.c_bigint, t.c_text, t.pk
-         ->  Seq Scan on fast_default.t
-               Output: pk, c_bigint, c_text
-               Filter: (t.c_bigint > '-1'::integer)
-(8 rows)
-
---  DELETE with RETURNING
-DELETE FROM T WHERE pk BETWEEN 10 AND 20 RETURNING *;
- pk | c_bigint | c_text 
-----+----------+--------
- 10 |       -1 | hello
- 11 |        1 | hello
- 12 |        2 | hello
- 13 |        3 | hello
- 14 |        4 | hello
- 15 |        5 | hello
- 16 |        6 | hello
- 17 |        7 | hello
- 18 |        8 | hello
- 19 |        9 | hello
- 20 |       10 | hello
-(11 rows)
-
-EXPLAIN (VERBOSE TRUE, COSTS FALSE)
-DELETE FROM T WHERE pk BETWEEN 10 AND 20 RETURNING *;
-                        QUERY PLAN                         
------------------------------------------------------------
- Delete on fast_default.t
-   Output: pk, c_bigint, c_text
-   ->  Bitmap Heap Scan on fast_default.t
-         Output: ctid
-         Recheck Cond: ((t.pk >= 10) AND (t.pk <= 20))
-         ->  Bitmap Index Scan on t_pkey
-               Index Cond: ((t.pk >= 10) AND (t.pk <= 20))
-(7 rows)
-
--- UPDATE
-UPDATE T SET c_text = '"' || c_text || '"'  WHERE pk < 10;
-SELECT * FROM T WHERE c_text LIKE '"%"' ORDER BY PK;
- pk | c_bigint | c_text  
-----+----------+---------
-  1 |       -1 | "hello"
-  2 |       -1 | "hello"
-  3 |       -1 | "hello"
-  4 |       -1 | "hello"
-  5 |       -1 | "hello"
-  6 |       -1 | "hello"
-  7 |       -1 | "hello"
-  8 |       -1 | "hello"
-  9 |       -1 | "hello"
-(9 rows)
-
-SELECT comp();
-   comp    
------------
- Unchanged
-(1 row)
-
-DROP TABLE T;
--- Combine with other DDL
-CREATE TABLE T(pk INT NOT NULL PRIMARY KEY);
-SELECT set('t');
- set 
------
- 
-(1 row)
-
-INSERT INTO T VALUES (1), (2);
-ALTER TABLE T ADD COLUMN c_int INT NOT NULL DEFAULT -1;
-INSERT INTO T VALUES (3), (4);
-ALTER TABLE T ADD COLUMN c_text TEXT DEFAULT 'Hello';
-INSERT INTO T VALUES (5), (6);
-ALTER TABLE T ALTER COLUMN c_text SET DEFAULT 'world',
-              ALTER COLUMN c_int  SET DEFAULT 1;
-INSERT INTO T VALUES (7), (8);
-SELECT * FROM T ORDER BY pk;
- pk | c_int | c_text 
-----+-------+--------
-  1 |    -1 | Hello
-  2 |    -1 | Hello
-  3 |    -1 | Hello
-  4 |    -1 | Hello
-  5 |    -1 | Hello
-  6 |    -1 | Hello
-  7 |     1 | world
-  8 |     1 | world
-(8 rows)
-
--- Add an index
-CREATE INDEX i ON T(c_int, c_text);
-SELECT c_text FROM T WHERE c_int = -1;
- c_text 
---------
- Hello
- Hello
- Hello
- Hello
- Hello
- Hello
-(6 rows)
-
-SELECT comp();
-   comp    
------------
- Unchanged
-(1 row)
-
--- query to exercise expand_tuple function
-CREATE TABLE t1 AS
-SELECT 1::int AS a , 2::int AS b
-FROM generate_series(1,20) q;
-ALTER TABLE t1 ADD COLUMN c text;
-SELECT a,
-       stddev(cast((SELECT sum(1) FROM generate_series(1,20) x) AS float4))
-          OVER (PARTITION BY a,b,c ORDER BY b)
-       AS z
-FROM t1;
- a | z 
----+---
- 1 | 0
- 1 | 0
- 1 | 0
- 1 | 0
- 1 | 0
- 1 | 0
- 1 | 0
- 1 | 0
- 1 | 0
- 1 | 0
- 1 | 0
- 1 | 0
- 1 | 0
- 1 | 0
- 1 | 0
- 1 | 0
- 1 | 0
- 1 | 0
- 1 | 0
- 1 | 0
-(20 rows)
-
-DROP TABLE T;
--- test that we account for missing columns without defaults correctly
--- in expand_tuple, and that rows are correctly expanded for triggers
-CREATE FUNCTION test_trigger()
-RETURNS trigger
-LANGUAGE plpgsql
-AS $$
-
-begin
-    raise notice 'old tuple: %', to_json(OLD)::text;
-    if TG_OP = 'DELETE'
-    then
-       return OLD;
-    else
-       return NEW;
-    end if;
-end;
-
-$$;
--- 2 new columns, both have defaults
-CREATE TABLE t (id serial PRIMARY KEY, a int, b int, c int);
-INSERT INTO t (a,b,c) VALUES (1,2,3);
-ALTER TABLE t ADD COLUMN x int NOT NULL DEFAULT 4;
-ALTER TABLE t ADD COLUMN y int NOT NULL DEFAULT 5;
-CREATE TRIGGER a BEFORE UPDATE ON t FOR EACH ROW EXECUTE PROCEDURE test_trigger();
-SELECT * FROM t;
- id | a | b | c | x | y 
-----+---+---+---+---+---
-  1 | 1 | 2 | 3 | 4 | 5
-(1 row)
-
-UPDATE t SET y = 2;
-NOTICE:  old tuple: {"id":1,"a":1,"b":2,"c":3,"x":4,"y":5}
-SELECT * FROM t;
- id | a | b | c | x | y 
-----+---+---+---+---+---
-  1 | 1 | 2 | 3 | 4 | 2
-(1 row)
-
-DROP TABLE t;
--- 2 new columns, first has default
-CREATE TABLE t (id serial PRIMARY KEY, a int, b int, c int);
-INSERT INTO t (a,b,c) VALUES (1,2,3);
-ALTER TABLE t ADD COLUMN x int NOT NULL DEFAULT 4;
-ALTER TABLE t ADD COLUMN y int;
-CREATE TRIGGER a BEFORE UPDATE ON t FOR EACH ROW EXECUTE PROCEDURE test_trigger();
-SELECT * FROM t;
- id | a | b | c | x | y 
-----+---+---+---+---+---
-  1 | 1 | 2 | 3 | 4 |  
-(1 row)
-
-UPDATE t SET y = 2;
-NOTICE:  old tuple: {"id":1,"a":1,"b":2,"c":3,"x":4,"y":null}
-SELECT * FROM t;
- id | a | b | c | x | y 
-----+---+---+---+---+---
-  1 | 1 | 2 | 3 | 4 | 2
-(1 row)
-
-DROP TABLE t;
--- 2 new columns, second has default
-CREATE TABLE t (id serial PRIMARY KEY, a int, b int, c int);
-INSERT INTO t (a,b,c) VALUES (1,2,3);
-ALTER TABLE t ADD COLUMN x int;
-ALTER TABLE t ADD COLUMN y int NOT NULL DEFAULT 5;
-CREATE TRIGGER a BEFORE UPDATE ON t FOR EACH ROW EXECUTE PROCEDURE test_trigger();
-SELECT * FROM t;
- id | a | b | c | x | y 
-----+---+---+---+---+---
-  1 | 1 | 2 | 3 |   | 5
-(1 row)
-
-UPDATE t SET y = 2;
-NOTICE:  old tuple: {"id":1,"a":1,"b":2,"c":3,"x":null,"y":5}
-SELECT * FROM t;
- id | a | b | c | x | y 
-----+---+---+---+---+---
-  1 | 1 | 2 | 3 |   | 2
-(1 row)
-
-DROP TABLE t;
--- 2 new columns, neither has default
-CREATE TABLE t (id serial PRIMARY KEY, a int, b int, c int);
-INSERT INTO t (a,b,c) VALUES (1,2,3);
-ALTER TABLE t ADD COLUMN x int;
-ALTER TABLE t ADD COLUMN y int;
-CREATE TRIGGER a BEFORE UPDATE ON t FOR EACH ROW EXECUTE PROCEDURE test_trigger();
-SELECT * FROM t;
- id | a | b | c | x | y 
-----+---+---+---+---+---
-  1 | 1 | 2 | 3 |   |  
-(1 row)
-
-UPDATE t SET y = 2;
-NOTICE:  old tuple: {"id":1,"a":1,"b":2,"c":3,"x":null,"y":null}
-SELECT * FROM t;
- id | a | b | c | x | y 
-----+---+---+---+---+---
-  1 | 1 | 2 | 3 |   | 2
-(1 row)
-
-DROP TABLE t;
--- same as last 4 tests but here the last original column has a NULL value
--- 2 new columns, both have defaults
-CREATE TABLE t (id serial PRIMARY KEY, a int, b int, c int);
-INSERT INTO t (a,b,c) VALUES (1,2,NULL);
-ALTER TABLE t ADD COLUMN x int NOT NULL DEFAULT 4;
-ALTER TABLE t ADD COLUMN y int NOT NULL DEFAULT 5;
-CREATE TRIGGER a BEFORE UPDATE ON t FOR EACH ROW EXECUTE PROCEDURE test_trigger();
-SELECT * FROM t;
- id | a | b | c | x | y 
-----+---+---+---+---+---
-  1 | 1 | 2 |   | 4 | 5
-(1 row)
-
-UPDATE t SET y = 2;
-NOTICE:  old tuple: {"id":1,"a":1,"b":2,"c":null,"x":4,"y":5}
-SELECT * FROM t;
- id | a | b | c | x | y 
-----+---+---+---+---+---
-  1 | 1 | 2 |   | 4 | 2
-(1 row)
-
-DROP TABLE t;
--- 2 new columns, first has default
-CREATE TABLE t (id serial PRIMARY KEY, a int, b int, c int);
-INSERT INTO t (a,b,c) VALUES (1,2,NULL);
-ALTER TABLE t ADD COLUMN x int NOT NULL DEFAULT 4;
-ALTER TABLE t ADD COLUMN y int;
-CREATE TRIGGER a BEFORE UPDATE ON t FOR EACH ROW EXECUTE PROCEDURE test_trigger();
-SELECT * FROM t;
- id | a | b | c | x | y 
-----+---+---+---+---+---
-  1 | 1 | 2 |   | 4 |  
-(1 row)
-
-UPDATE t SET y = 2;
-NOTICE:  old tuple: {"id":1,"a":1,"b":2,"c":null,"x":4,"y":null}
-SELECT * FROM t;
- id | a | b | c | x | y 
-----+---+---+---+---+---
-  1 | 1 | 2 |   | 4 | 2
-(1 row)
-
-DROP TABLE t;
--- 2 new columns, second has default
-CREATE TABLE t (id serial PRIMARY KEY, a int, b int, c int);
-INSERT INTO t (a,b,c) VALUES (1,2,NULL);
-ALTER TABLE t ADD COLUMN x int;
-ALTER TABLE t ADD COLUMN y int NOT NULL DEFAULT 5;
-CREATE TRIGGER a BEFORE UPDATE ON t FOR EACH ROW EXECUTE PROCEDURE test_trigger();
-SELECT * FROM t;
- id | a | b | c | x | y 
-----+---+---+---+---+---
-  1 | 1 | 2 |   |   | 5
-(1 row)
-
-UPDATE t SET y = 2;
-NOTICE:  old tuple: {"id":1,"a":1,"b":2,"c":null,"x":null,"y":5}
-SELECT * FROM t;
- id | a | b | c | x | y 
-----+---+---+---+---+---
-  1 | 1 | 2 |   |   | 2
-(1 row)
-
-DROP TABLE t;
--- 2 new columns, neither has default
-CREATE TABLE t (id serial PRIMARY KEY, a int, b int, c int);
-INSERT INTO t (a,b,c) VALUES (1,2,NULL);
-ALTER TABLE t ADD COLUMN x int;
-ALTER TABLE t ADD COLUMN y int;
-CREATE TRIGGER a BEFORE UPDATE ON t FOR EACH ROW EXECUTE PROCEDURE test_trigger();
-SELECT * FROM t;
- id | a | b | c | x | y 
-----+---+---+---+---+---
-  1 | 1 | 2 |   |   |  
-(1 row)
-
-UPDATE t SET y = 2;
-NOTICE:  old tuple: {"id":1,"a":1,"b":2,"c":null,"x":null,"y":null}
-SELECT * FROM t;
- id | a | b | c | x | y 
-----+---+---+---+---+---
-  1 | 1 | 2 |   |   | 2
-(1 row)
-
-DROP TABLE t;
--- make sure expanded tuple has correct self pointer
--- it will be required by the RI trigger doing the cascading delete
-CREATE TABLE leader (a int PRIMARY KEY, b int);
-CREATE TABLE follower (a int REFERENCES leader ON DELETE CASCADE, b int);
-INSERT INTO leader VALUES (1, 1), (2, 2);
-ALTER TABLE leader ADD c int;
-ALTER TABLE leader DROP c;
-DELETE FROM leader;
--- check that ALTER TABLE ... ALTER TYPE does the right thing
-CREATE TABLE vtype( a integer);
-INSERT INTO vtype VALUES (1);
-ALTER TABLE vtype ADD COLUMN b DOUBLE PRECISION DEFAULT 0.2;
-ALTER TABLE vtype ADD COLUMN c BOOLEAN DEFAULT true;
-SELECT * FROM vtype;
- a |  b  | c 
----+-----+---
- 1 | 0.2 | t
-(1 row)
-
-ALTER TABLE vtype
-      ALTER b TYPE text USING b::text,
-      ALTER c TYPE text USING c::text;
-NOTICE:  rewriting table vtype for reason 4
-SELECT * FROM vtype;
- a |  b  |  c   
----+-----+------
- 1 | 0.2 | true
-(1 row)
-
--- also check the case that doesn't rewrite the table
-CREATE TABLE vtype2 (a int);
-INSERT INTO vtype2 VALUES (1);
-ALTER TABLE vtype2 ADD COLUMN b varchar(10) DEFAULT 'xxx';
-ALTER TABLE vtype2 ALTER COLUMN b SET DEFAULT 'yyy';
-INSERT INTO vtype2 VALUES (2);
-ALTER TABLE vtype2 ALTER COLUMN b TYPE varchar(20) USING b::varchar(20);
-SELECT * FROM vtype2;
- a |  b  
----+-----
- 1 | xxx
- 2 | yyy
-(2 rows)
-
--- Ensure that defaults are checked when evaluating whether HOT update
--- is possible, this was broken for a while:
--- https://postgr.es/m/20190202133521.ylauh3ckqa7colzj%40alap3.anarazel.de
-BEGIN;
-CREATE TABLE t();
-INSERT INTO t DEFAULT VALUES;
-ALTER TABLE t ADD COLUMN a int DEFAULT 1;
-CREATE INDEX ON t(a);
--- set column with a default 1 to NULL, due to a bug that wasn't
--- noticed has heap_getattr buggily returned NULL for default columns
-UPDATE t SET a = NULL;
--- verify that index and non-index scans show the same result
-SET LOCAL enable_seqscan = true;
-SELECT * FROM t WHERE a IS NULL;
- a 
----
-  
-(1 row)
-
-SET LOCAL enable_seqscan = false;
-SELECT * FROM t WHERE a IS NULL;
- a 
----
-  
-(1 row)
-
-ROLLBACK;
--- verify that a default set on a non-plain table doesn't set a missing
--- value on the attribute
-CREATE FOREIGN DATA WRAPPER dummy;
-CREATE SERVER s0 FOREIGN DATA WRAPPER dummy;
-CREATE FOREIGN TABLE ft1 (c1 integer NOT NULL) SERVER s0;
-ALTER FOREIGN TABLE ft1 ADD COLUMN c8 integer DEFAULT 0;
-ALTER FOREIGN TABLE ft1 ALTER COLUMN c8 TYPE char(10);
-SELECT count(*)
-  FROM pg_attribute
-  WHERE attrelid = 'ft1'::regclass AND
-    (attmissingval IS NOT NULL OR atthasmissing);
- count 
--------
-     0
-(1 row)
-
--- cleanup
-DROP FOREIGN TABLE ft1;
-DROP SERVER s0;
-DROP FOREIGN DATA WRAPPER dummy;
-DROP TABLE vtype;
-DROP TABLE vtype2;
-DROP TABLE follower;
-DROP TABLE leader;
-DROP FUNCTION test_trigger();
-DROP TABLE t1;
-DROP FUNCTION set(name);
-DROP FUNCTION comp();
-DROP TABLE m;
-DROP TABLE has_volatile;
-DROP EVENT TRIGGER has_volatile_rewrite;
-DROP FUNCTION log_rewrite;
-DROP SCHEMA fast_default;
--- Leave a table with an active fast default in place, for pg_upgrade testing
-set search_path = public;
-create table has_fast_default(f1 int);
-insert into has_fast_default values(1);
-alter table has_fast_default add column f2 int default 42;
-table has_fast_default;
- f1 | f2 
-----+----
-  1 | 42
-(1 row)
-
+psql: error: connection to server on socket "/tmp/f_SDOOqtof/.s.PGSQL.16412" failed: No such file or directory
+	Is the server running locally and accepting connections on that socket?
diff -U3 /tmp/cirrus-ci-build/src/test/regress/expected/tablespace.out /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/tablespace.out
--- /tmp/cirrus-ci-build/src/test/regress/expected/tablespace.out	2024-09-20 04:07:19.082870628 +0000
+++ /tmp/cirrus-ci-build/src/test/recovery/tmp_check/results/tablespace.out	2024-09-20 04:17:09.317564568 +0000
@@ -1,968 +1,2 @@
--- relative tablespace locations are not allowed
-CREATE TABLESPACE regress_tblspace LOCATION 'relative'; -- fail
-ERROR:  tablespace location must be an absolute path
--- empty tablespace locations are not usually allowed
-CREATE TABLESPACE regress_tblspace LOCATION ''; -- fail
-ERROR:  tablespace location must be an absolute path
--- as a special developer-only option to allow us to use tablespaces
--- with streaming replication on the same server, an empty location
--- can be allowed as a way to say that the tablespace should be created
--- as a directory in pg_tblspc, rather than being a symlink
-SET allow_in_place_tablespaces = true;
--- create a tablespace using WITH clause
-CREATE TABLESPACE regress_tblspacewith LOCATION '' WITH (some_nonexistent_parameter = true); -- fail
-ERROR:  unrecognized parameter "some_nonexistent_parameter"
-CREATE TABLESPACE regress_tblspacewith LOCATION '' WITH (random_page_cost = 3.0); -- ok
--- check to see the parameter was used
-SELECT spcoptions FROM pg_tablespace WHERE spcname = 'regress_tblspacewith';
-       spcoptions       
-------------------------
- {random_page_cost=3.0}
-(1 row)
-
--- drop the tablespace so we can re-use the location
-DROP TABLESPACE regress_tblspacewith;
--- This returns a relative path as of an effect of allow_in_place_tablespaces,
--- masking the tablespace OID used in the path name.
-SELECT regexp_replace(pg_tablespace_location(oid), '(pg_tblspc)/(\d+)', '\1/NNN')
-  FROM pg_tablespace  WHERE spcname = 'regress_tblspace';
- regexp_replace 
-----------------
- pg_tblspc/NNN
-(1 row)
-
--- try setting and resetting some properties for the new tablespace
-ALTER TABLESPACE regress_tblspace SET (random_page_cost = 1.0, seq_page_cost = 1.1);
-ALTER TABLESPACE regress_tblspace SET (some_nonexistent_parameter = true);  -- fail
-ERROR:  unrecognized parameter "some_nonexistent_parameter"
-ALTER TABLESPACE regress_tblspace RESET (random_page_cost = 2.0); -- fail
-ERROR:  RESET must not include values for parameters
-ALTER TABLESPACE regress_tblspace RESET (random_page_cost, effective_io_concurrency); -- ok
--- REINDEX (TABLESPACE)
--- catalogs and system tablespaces
--- system catalog, fail
-REINDEX (TABLESPACE regress_tblspace) TABLE pg_am;
-ERROR:  cannot move system relation "pg_am_name_index"
-REINDEX (TABLESPACE regress_tblspace) TABLE CONCURRENTLY pg_am;
-ERROR:  cannot reindex system catalogs concurrently
--- shared catalog, fail
-REINDEX (TABLESPACE regress_tblspace) TABLE pg_authid;
-ERROR:  cannot move system relation "pg_authid_rolname_index"
-REINDEX (TABLESPACE regress_tblspace) TABLE CONCURRENTLY pg_authid;
-ERROR:  cannot reindex system catalogs concurrently
--- toast relations, fail
-REINDEX (TABLESPACE regress_tblspace) INDEX pg_toast.pg_toast_1260_index;
-ERROR:  cannot move system relation "pg_toast_1260_index"
-REINDEX (TABLESPACE regress_tblspace) INDEX CONCURRENTLY pg_toast.pg_toast_1260_index;
-ERROR:  cannot reindex system catalogs concurrently
-REINDEX (TABLESPACE regress_tblspace) TABLE pg_toast.pg_toast_1260;
-ERROR:  cannot move system relation "pg_toast_1260_index"
-REINDEX (TABLESPACE regress_tblspace) TABLE CONCURRENTLY pg_toast.pg_toast_1260;
-ERROR:  cannot reindex system catalogs concurrently
--- system catalog, fail
-REINDEX (TABLESPACE pg_global) TABLE pg_authid;
-ERROR:  cannot move system relation "pg_authid_rolname_index"
-REINDEX (TABLESPACE pg_global) TABLE CONCURRENTLY pg_authid;
-ERROR:  cannot reindex system catalogs concurrently
--- table with toast relation
-CREATE TABLE regress_tblspace_test_tbl (num1 bigint, num2 double precision, t text);
-INSERT INTO regress_tblspace_test_tbl (num1, num2, t)
-  SELECT round(random()*100), random(), 'text'
-  FROM generate_series(1, 10) s(i);
-CREATE INDEX regress_tblspace_test_tbl_idx ON regress_tblspace_test_tbl (num1);
--- move to global tablespace, fail
-REINDEX (TABLESPACE pg_global) INDEX regress_tblspace_test_tbl_idx;
-ERROR:  only shared relations can be placed in pg_global tablespace
-REINDEX (TABLESPACE pg_global) INDEX CONCURRENTLY regress_tblspace_test_tbl_idx;
-ERROR:  cannot move non-shared relation to tablespace "pg_global"
--- check transactional behavior of REINDEX (TABLESPACE)
-BEGIN;
-REINDEX (TABLESPACE regress_tblspace) INDEX regress_tblspace_test_tbl_idx;
-REINDEX (TABLESPACE regress_tblspace) TABLE regress_tblspace_test_tbl;
-ROLLBACK;
--- no relation moved to the new tablespace
-SELECT c.relname FROM pg_class c, pg_tablespace s
-  WHERE c.reltablespace = s.oid AND s.spcname = 'regress_tblspace';
- relname 
----------
-(0 rows)
-
--- check that all indexes are moved to a new tablespace with different
--- relfilenode.
--- Save first the existing relfilenode for the toast and main relations.
-SELECT relfilenode as main_filenode FROM pg_class
-  WHERE relname = 'regress_tblspace_test_tbl_idx' \gset
-SELECT relfilenode as toast_filenode FROM pg_class
-  WHERE oid =
-    (SELECT i.indexrelid
-       FROM pg_class c,
-            pg_index i
-       WHERE i.indrelid = c.reltoastrelid AND
-             c.relname = 'regress_tblspace_test_tbl') \gset
-REINDEX (TABLESPACE regress_tblspace) TABLE regress_tblspace_test_tbl;
-SELECT c.relname FROM pg_class c, pg_tablespace s
-  WHERE c.reltablespace = s.oid AND s.spcname = 'regress_tblspace'
-  ORDER BY c.relname;
-            relname            
--------------------------------
- regress_tblspace_test_tbl_idx
-(1 row)
-
-ALTER TABLE regress_tblspace_test_tbl SET TABLESPACE regress_tblspace;
-ALTER TABLE regress_tblspace_test_tbl SET TABLESPACE pg_default;
-SELECT c.relname FROM pg_class c, pg_tablespace s
-  WHERE c.reltablespace = s.oid AND s.spcname = 'regress_tblspace'
-  ORDER BY c.relname;
-            relname            
--------------------------------
- regress_tblspace_test_tbl_idx
-(1 row)
-
--- Move back to the default tablespace.
-ALTER INDEX regress_tblspace_test_tbl_idx SET TABLESPACE pg_default;
-SELECT c.relname FROM pg_class c, pg_tablespace s
-  WHERE c.reltablespace = s.oid AND s.spcname = 'regress_tblspace'
-  ORDER BY c.relname;
- relname 
----------
-(0 rows)
-
-REINDEX (TABLESPACE regress_tblspace, CONCURRENTLY) TABLE regress_tblspace_test_tbl;
-SELECT c.relname FROM pg_class c, pg_tablespace s
-  WHERE c.reltablespace = s.oid AND s.spcname = 'regress_tblspace'
-  ORDER BY c.relname;
-            relname            
--------------------------------
- regress_tblspace_test_tbl_idx
-(1 row)
-
-SELECT relfilenode = :main_filenode AS main_same FROM pg_class
-  WHERE relname = 'regress_tblspace_test_tbl_idx';
- main_same 
------------
- f
-(1 row)
-
-SELECT relfilenode = :toast_filenode as toast_same FROM pg_class
-  WHERE oid =
-    (SELECT i.indexrelid
-       FROM pg_class c,
-            pg_index i
-       WHERE i.indrelid = c.reltoastrelid AND
-             c.relname = 'regress_tblspace_test_tbl');
- toast_same 
-------------
- f
-(1 row)
-
-DROP TABLE regress_tblspace_test_tbl;
--- REINDEX (TABLESPACE) with partitions
--- Create a partition tree and check the set of relations reindexed
--- with their new tablespace.
-CREATE TABLE tbspace_reindex_part (c1 int, c2 int) PARTITION BY RANGE (c1);
-CREATE TABLE tbspace_reindex_part_0 PARTITION OF tbspace_reindex_part
-  FOR VALUES FROM (0) TO (10) PARTITION BY list (c2);
-CREATE TABLE tbspace_reindex_part_0_1 PARTITION OF tbspace_reindex_part_0
-  FOR VALUES IN (1);
-CREATE TABLE tbspace_reindex_part_0_2 PARTITION OF tbspace_reindex_part_0
-  FOR VALUES IN (2);
--- This partitioned table will have no partitions.
-CREATE TABLE tbspace_reindex_part_10 PARTITION OF tbspace_reindex_part
-   FOR VALUES FROM (10) TO (20) PARTITION BY list (c2);
--- Create some partitioned indexes
-CREATE INDEX tbspace_reindex_part_index ON ONLY tbspace_reindex_part (c1);
-CREATE INDEX tbspace_reindex_part_index_0 ON ONLY tbspace_reindex_part_0 (c1);
-ALTER INDEX tbspace_reindex_part_index ATTACH PARTITION tbspace_reindex_part_index_0;
--- This partitioned index will have no partitions.
-CREATE INDEX tbspace_reindex_part_index_10 ON ONLY tbspace_reindex_part_10 (c1);
-ALTER INDEX tbspace_reindex_part_index ATTACH PARTITION tbspace_reindex_part_index_10;
-CREATE INDEX tbspace_reindex_part_index_0_1 ON ONLY tbspace_reindex_part_0_1 (c1);
-ALTER INDEX tbspace_reindex_part_index_0 ATTACH PARTITION tbspace_reindex_part_index_0_1;
-CREATE INDEX tbspace_reindex_part_index_0_2 ON ONLY tbspace_reindex_part_0_2 (c1);
-ALTER INDEX tbspace_reindex_part_index_0 ATTACH PARTITION tbspace_reindex_part_index_0_2;
-SELECT relid, parentrelid, level FROM pg_partition_tree('tbspace_reindex_part_index')
-  ORDER BY relid, level;
-             relid              |         parentrelid          | level 
---------------------------------+------------------------------+-------
- tbspace_reindex_part_index     |                              |     0
- tbspace_reindex_part_index_0   | tbspace_reindex_part_index   |     1
- tbspace_reindex_part_index_10  | tbspace_reindex_part_index   |     1
- tbspace_reindex_part_index_0_1 | tbspace_reindex_part_index_0 |     2
- tbspace_reindex_part_index_0_2 | tbspace_reindex_part_index_0 |     2
-(5 rows)
-
--- Track the original tablespace, relfilenode and OID of each index
--- in the tree.
-CREATE TEMP TABLE reindex_temp_before AS
-  SELECT oid, relname, relfilenode, reltablespace
-  FROM pg_class
-    WHERE relname ~ 'tbspace_reindex_part_index';
-REINDEX (TABLESPACE regress_tblspace, CONCURRENTLY) TABLE tbspace_reindex_part;
--- REINDEX CONCURRENTLY changes the OID of the old relation, hence a check
--- based on the relation name below.
-SELECT b.relname,
-       CASE WHEN a.relfilenode = b.relfilenode THEN 'relfilenode is unchanged'
-       ELSE 'relfilenode has changed' END AS filenode,
-       CASE WHEN a.reltablespace = b.reltablespace THEN 'reltablespace is unchanged'
-       ELSE 'reltablespace has changed' END AS tbspace
-  FROM reindex_temp_before b JOIN pg_class a ON b.relname = a.relname
-  ORDER BY 1;
-            relname             |         filenode         |          tbspace           
---------------------------------+--------------------------+----------------------------
- tbspace_reindex_part_index     | relfilenode is unchanged | reltablespace is unchanged
- tbspace_reindex_part_index_0   | relfilenode is unchanged | reltablespace is unchanged
- tbspace_reindex_part_index_0_1 | relfilenode has changed  | reltablespace has changed
- tbspace_reindex_part_index_0_2 | relfilenode has changed  | reltablespace has changed
- tbspace_reindex_part_index_10  | relfilenode is unchanged | reltablespace is unchanged
-(5 rows)
-
-DROP TABLE tbspace_reindex_part;
--- create a schema we can use
-CREATE SCHEMA testschema;
--- try a table
-CREATE TABLE testschema.foo (i int) TABLESPACE regress_tblspace;
-SELECT relname, spcname FROM pg_catalog.pg_tablespace t, pg_catalog.pg_class c
-    where c.reltablespace = t.oid AND c.relname = 'foo';
- relname |     spcname      
----------+------------------
- foo     | regress_tblspace
-(1 row)
-
-INSERT INTO testschema.foo VALUES(1);
-INSERT INTO testschema.foo VALUES(2);
--- tables from dynamic sources
-CREATE TABLE testschema.asselect TABLESPACE regress_tblspace AS SELECT 1;
-SELECT relname, spcname FROM pg_catalog.pg_tablespace t, pg_catalog.pg_class c
-    where c.reltablespace = t.oid AND c.relname = 'asselect';
- relname  |     spcname      
-----------+------------------
- asselect | regress_tblspace
-(1 row)
-
-PREPARE selectsource(int) AS SELECT $1;
-CREATE TABLE testschema.asexecute TABLESPACE regress_tblspace
-    AS EXECUTE selectsource(2);
-SELECT relname, spcname FROM pg_catalog.pg_tablespace t, pg_catalog.pg_class c
-    where c.reltablespace = t.oid AND c.relname = 'asexecute';
-  relname  |     spcname      
------------+------------------
- asexecute | regress_tblspace
-(1 row)
-
--- index
-CREATE INDEX foo_idx on testschema.foo(i) TABLESPACE regress_tblspace;
-SELECT relname, spcname FROM pg_catalog.pg_tablespace t, pg_catalog.pg_class c
-    where c.reltablespace = t.oid AND c.relname = 'foo_idx';
- relname |     spcname      
----------+------------------
- foo_idx | regress_tblspace
-(1 row)
-
--- check \d output
-\d testschema.foo
-              Table "testschema.foo"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- i      | integer |           |          | 
-Indexes:
-    "foo_idx" btree (i), tablespace "regress_tblspace"
-Tablespace: "regress_tblspace"
-
-\d testschema.foo_idx
-      Index "testschema.foo_idx"
- Column |  Type   | Key? | Definition 
---------+---------+------+------------
- i      | integer | yes  | i
-btree, for table "testschema.foo"
-Tablespace: "regress_tblspace"
-
---
--- partitioned table
---
-CREATE TABLE testschema.part (a int) PARTITION BY LIST (a);
-SET default_tablespace TO pg_global;
-CREATE TABLE testschema.part_1 PARTITION OF testschema.part FOR VALUES IN (1);
-ERROR:  only shared relations can be placed in pg_global tablespace
-RESET default_tablespace;
-CREATE TABLE testschema.part_1 PARTITION OF testschema.part FOR VALUES IN (1);
-SET default_tablespace TO regress_tblspace;
-CREATE TABLE testschema.part_2 PARTITION OF testschema.part FOR VALUES IN (2);
-SET default_tablespace TO pg_global;
-CREATE TABLE testschema.part_3 PARTITION OF testschema.part FOR VALUES IN (3);
-ERROR:  only shared relations can be placed in pg_global tablespace
-ALTER TABLE testschema.part SET TABLESPACE regress_tblspace;
-CREATE TABLE testschema.part_3 PARTITION OF testschema.part FOR VALUES IN (3);
-CREATE TABLE testschema.part_4 PARTITION OF testschema.part FOR VALUES IN (4)
-  TABLESPACE pg_default;
-CREATE TABLE testschema.part_56 PARTITION OF testschema.part FOR VALUES IN (5, 6)
-  PARTITION BY LIST (a);
-ALTER TABLE testschema.part SET TABLESPACE pg_default;
-CREATE TABLE testschema.part_78 PARTITION OF testschema.part FOR VALUES IN (7, 8)
-  PARTITION BY LIST (a);
-ERROR:  only shared relations can be placed in pg_global tablespace
-CREATE TABLE testschema.part_910 PARTITION OF testschema.part FOR VALUES IN (9, 10)
-  PARTITION BY LIST (a) TABLESPACE regress_tblspace;
-RESET default_tablespace;
-CREATE TABLE testschema.part_78 PARTITION OF testschema.part FOR VALUES IN (7, 8)
-  PARTITION BY LIST (a);
-SELECT relname, spcname FROM pg_catalog.pg_class c
-    JOIN pg_catalog.pg_namespace n ON (c.relnamespace = n.oid)
-    LEFT JOIN pg_catalog.pg_tablespace t ON c.reltablespace = t.oid
-    where c.relname LIKE 'part%' AND n.nspname = 'testschema' order by relname;
- relname  |     spcname      
-----------+------------------
- part     | 
- part_1   | 
- part_2   | regress_tblspace
- part_3   | regress_tblspace
- part_4   | 
- part_56  | regress_tblspace
- part_78  | 
- part_910 | regress_tblspace
-(8 rows)
-
-RESET default_tablespace;
-DROP TABLE testschema.part;
--- partitioned index
-CREATE TABLE testschema.part (a int) PARTITION BY LIST (a);
-CREATE TABLE testschema.part1 PARTITION OF testschema.part FOR VALUES IN (1);
-CREATE INDEX part_a_idx ON testschema.part (a) TABLESPACE regress_tblspace;
-CREATE TABLE testschema.part2 PARTITION OF testschema.part FOR VALUES IN (2);
-SELECT relname, spcname FROM pg_catalog.pg_tablespace t, pg_catalog.pg_class c
-    where c.reltablespace = t.oid AND c.relname LIKE 'part%_idx' ORDER BY relname;
-   relname   |     spcname      
--------------+------------------
- part1_a_idx | regress_tblspace
- part2_a_idx | regress_tblspace
- part_a_idx  | regress_tblspace
-(3 rows)
-
-\d testschema.part
-        Partitioned table "testschema.part"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           |          | 
-Partition key: LIST (a)
-Indexes:
-    "part_a_idx" btree (a), tablespace "regress_tblspace"
-Number of partitions: 2 (Use \d+ to list them.)
-
-\d+ testschema.part
-                           Partitioned table "testschema.part"
- Column |  Type   | Collation | Nullable | Default | Storage | Stats target | Description 
---------+---------+-----------+----------+---------+---------+--------------+-------------
- a      | integer |           |          |         | plain   |              | 
-Partition key: LIST (a)
-Indexes:
-    "part_a_idx" btree (a), tablespace "regress_tblspace"
-Partitions: testschema.part1 FOR VALUES IN (1),
-            testschema.part2 FOR VALUES IN (2)
-
-\d testschema.part1
-             Table "testschema.part1"
- Column |  Type   | Collation | Nullable | Default 
---------+---------+-----------+----------+---------
- a      | integer |           |          | 
-Partition of: testschema.part FOR VALUES IN (1)
-Indexes:
-    "part1_a_idx" btree (a), tablespace "regress_tblspace"
-
-\d+ testschema.part1
-                                 Table "testschema.part1"
- Column |  Type   | Collation | Nullable | Default | Storage | Stats target | Description 
---------+---------+-----------+----------+---------+---------+--------------+-------------
- a      | integer |           |          |         | plain   |              | 
-Partition of: testschema.part FOR VALUES IN (1)
-Partition constraint: ((a IS NOT NULL) AND (a = 1))
-Indexes:
-    "part1_a_idx" btree (a), tablespace "regress_tblspace"
-
-\d testschema.part_a_idx
-Partitioned index "testschema.part_a_idx"
- Column |  Type   | Key? | Definition 
---------+---------+------+------------
- a      | integer | yes  | a
-btree, for table "testschema.part"
-Number of partitions: 2 (Use \d+ to list them.)
-Tablespace: "regress_tblspace"
-
-\d+ testschema.part_a_idx
-           Partitioned index "testschema.part_a_idx"
- Column |  Type   | Key? | Definition | Storage | Stats target 
---------+---------+------+------------+---------+--------------
- a      | integer | yes  | a          | plain   | 
-btree, for table "testschema.part"
-Partitions: testschema.part1_a_idx,
-            testschema.part2_a_idx
-Tablespace: "regress_tblspace"
-
--- partitioned rels cannot specify the default tablespace.  These fail:
-CREATE TABLE testschema.dflt (a int PRIMARY KEY) PARTITION BY LIST (a) TABLESPACE pg_default;
-ERROR:  cannot specify default tablespace for partitioned relations
-CREATE TABLE testschema.dflt (a int PRIMARY KEY USING INDEX TABLESPACE pg_default) PARTITION BY LIST (a);
-ERROR:  cannot specify default tablespace for partitioned relations
-SET default_tablespace TO 'pg_default';
-CREATE TABLE testschema.dflt (a int PRIMARY KEY) PARTITION BY LIST (a) TABLESPACE regress_tblspace;
-ERROR:  cannot specify default tablespace for partitioned relations
-CREATE TABLE testschema.dflt (a int PRIMARY KEY USING INDEX TABLESPACE regress_tblspace) PARTITION BY LIST (a);
-ERROR:  cannot specify default tablespace for partitioned relations
--- but these work:
-CREATE TABLE testschema.dflt (a int PRIMARY KEY USING INDEX TABLESPACE regress_tblspace) PARTITION BY LIST (a) TABLESPACE regress_tblspace;
-SET default_tablespace TO '';
-CREATE TABLE testschema.dflt2 (a int PRIMARY KEY) PARTITION BY LIST (a);
-DROP TABLE testschema.dflt, testschema.dflt2;
--- check that default_tablespace doesn't affect ALTER TABLE index rebuilds
-CREATE TABLE testschema.test_default_tab(id bigint) TABLESPACE regress_tblspace;
-INSERT INTO testschema.test_default_tab VALUES (1);
-CREATE INDEX test_index1 on testschema.test_default_tab (id);
-CREATE INDEX test_index2 on testschema.test_default_tab (id) TABLESPACE regress_tblspace;
-ALTER TABLE testschema.test_default_tab ADD CONSTRAINT test_index3 PRIMARY KEY (id);
-ALTER TABLE testschema.test_default_tab ADD CONSTRAINT test_index4 UNIQUE (id) USING INDEX TABLESPACE regress_tblspace;
-\d testschema.test_index1
-   Index "testschema.test_index1"
- Column |  Type  | Key? | Definition 
---------+--------+------+------------
- id     | bigint | yes  | id
-btree, for table "testschema.test_default_tab"
-
-\d testschema.test_index2
-   Index "testschema.test_index2"
- Column |  Type  | Key? | Definition 
---------+--------+------+------------
- id     | bigint | yes  | id
-btree, for table "testschema.test_default_tab"
-Tablespace: "regress_tblspace"
-
-\d testschema.test_index3
-   Index "testschema.test_index3"
- Column |  Type  | Key? | Definition 
---------+--------+------+------------
- id     | bigint | yes  | id
-primary key, btree, for table "testschema.test_default_tab"
-
-\d testschema.test_index4
-   Index "testschema.test_index4"
- Column |  Type  | Key? | Definition 
---------+--------+------+------------
- id     | bigint | yes  | id
-unique, btree, for table "testschema.test_default_tab"
-Tablespace: "regress_tblspace"
-
--- use a custom tablespace for default_tablespace
-SET default_tablespace TO regress_tblspace;
--- tablespace should not change if no rewrite
-ALTER TABLE testschema.test_default_tab ALTER id TYPE bigint;
-\d testschema.test_index1
-   Index "testschema.test_index1"
- Column |  Type  | Key? | Definition 
---------+--------+------+------------
- id     | bigint | yes  | id
-btree, for table "testschema.test_default_tab"
-
-\d testschema.test_index2
-   Index "testschema.test_index2"
- Column |  Type  | Key? | Definition 
---------+--------+------+------------
- id     | bigint | yes  | id
-btree, for table "testschema.test_default_tab"
-Tablespace: "regress_tblspace"
-
-\d testschema.test_index3
-   Index "testschema.test_index3"
- Column |  Type  | Key? | Definition 
---------+--------+------+------------
- id     | bigint | yes  | id
-primary key, btree, for table "testschema.test_default_tab"
-
-\d testschema.test_index4
-   Index "testschema.test_index4"
- Column |  Type  | Key? | Definition 
---------+--------+------+------------
- id     | bigint | yes  | id
-unique, btree, for table "testschema.test_default_tab"
-Tablespace: "regress_tblspace"
-
-SELECT * FROM testschema.test_default_tab;
- id 
-----
-  1
-(1 row)
-
--- tablespace should not change even if there is an index rewrite
-ALTER TABLE testschema.test_default_tab ALTER id TYPE int;
-\d testschema.test_index1
-    Index "testschema.test_index1"
- Column |  Type   | Key? | Definition 
---------+---------+------+------------
- id     | integer | yes  | id
-btree, for table "testschema.test_default_tab"
-
-\d testschema.test_index2
-    Index "testschema.test_index2"
- Column |  Type   | Key? | Definition 
---------+---------+------+------------
- id     | integer | yes  | id
-btree, for table "testschema.test_default_tab"
-Tablespace: "regress_tblspace"
-
-\d testschema.test_index3
-    Index "testschema.test_index3"
- Column |  Type   | Key? | Definition 
---------+---------+------+------------
- id     | integer | yes  | id
-primary key, btree, for table "testschema.test_default_tab"
-
-\d testschema.test_index4
-    Index "testschema.test_index4"
- Column |  Type   | Key? | Definition 
---------+---------+------+------------
- id     | integer | yes  | id
-unique, btree, for table "testschema.test_default_tab"
-Tablespace: "regress_tblspace"
-
-SELECT * FROM testschema.test_default_tab;
- id 
-----
-  1
-(1 row)
-
--- now use the default tablespace for default_tablespace
-SET default_tablespace TO '';
--- tablespace should not change if no rewrite
-ALTER TABLE testschema.test_default_tab ALTER id TYPE int;
-\d testschema.test_index1
-    Index "testschema.test_index1"
- Column |  Type   | Key? | Definition 
---------+---------+------+------------
- id     | integer | yes  | id
-btree, for table "testschema.test_default_tab"
-
-\d testschema.test_index2
-    Index "testschema.test_index2"
- Column |  Type   | Key? | Definition 
---------+---------+------+------------
- id     | integer | yes  | id
-btree, for table "testschema.test_default_tab"
-Tablespace: "regress_tblspace"
-
-\d testschema.test_index3
-    Index "testschema.test_index3"
- Column |  Type   | Key? | Definition 
---------+---------+------+------------
- id     | integer | yes  | id
-primary key, btree, for table "testschema.test_default_tab"
-
-\d testschema.test_index4
-    Index "testschema.test_index4"
- Column |  Type   | Key? | Definition 
---------+---------+------+------------
- id     | integer | yes  | id
-unique, btree, for table "testschema.test_default_tab"
-Tablespace: "regress_tblspace"
-
--- tablespace should not change even if there is an index rewrite
-ALTER TABLE testschema.test_default_tab ALTER id TYPE bigint;
-\d testschema.test_index1
-   Index "testschema.test_index1"
- Column |  Type  | Key? | Definition 
---------+--------+------+------------
- id     | bigint | yes  | id
-btree, for table "testschema.test_default_tab"
-
-\d testschema.test_index2
-   Index "testschema.test_index2"
- Column |  Type  | Key? | Definition 
---------+--------+------+------------
- id     | bigint | yes  | id
-btree, for table "testschema.test_default_tab"
-Tablespace: "regress_tblspace"
-
-\d testschema.test_index3
-   Index "testschema.test_index3"
- Column |  Type  | Key? | Definition 
---------+--------+------+------------
- id     | bigint | yes  | id
-primary key, btree, for table "testschema.test_default_tab"
-
-\d testschema.test_index4
-   Index "testschema.test_index4"
- Column |  Type  | Key? | Definition 
---------+--------+------+------------
- id     | bigint | yes  | id
-unique, btree, for table "testschema.test_default_tab"
-Tablespace: "regress_tblspace"
-
-DROP TABLE testschema.test_default_tab;
--- check that default_tablespace doesn't affect ALTER TABLE index rebuilds
--- (this time with a partitioned table)
-CREATE TABLE testschema.test_default_tab_p(id bigint, val bigint)
-    PARTITION BY LIST (id) TABLESPACE regress_tblspace;
-CREATE TABLE testschema.test_default_tab_p1 PARTITION OF testschema.test_default_tab_p
-    FOR VALUES IN (1);
-INSERT INTO testschema.test_default_tab_p VALUES (1);
-CREATE INDEX test_index1 on testschema.test_default_tab_p (val);
-CREATE INDEX test_index2 on testschema.test_default_tab_p (val) TABLESPACE regress_tblspace;
-ALTER TABLE testschema.test_default_tab_p ADD CONSTRAINT test_index3 PRIMARY KEY (id);
-ALTER TABLE testschema.test_default_tab_p ADD CONSTRAINT test_index4 UNIQUE (id) USING INDEX TABLESPACE regress_tblspace;
-\d testschema.test_index1
-Partitioned index "testschema.test_index1"
- Column |  Type  | Key? | Definition 
---------+--------+------+------------
- val    | bigint | yes  | val
-btree, for table "testschema.test_default_tab_p"
-Number of partitions: 1 (Use \d+ to list them.)
-
-\d testschema.test_index2
-Partitioned index "testschema.test_index2"
- Column |  Type  | Key? | Definition 
---------+--------+------+------------
- val    | bigint | yes  | val
-btree, for table "testschema.test_default_tab_p"
-Number of partitions: 1 (Use \d+ to list them.)
-Tablespace: "regress_tblspace"
-
-\d testschema.test_index3
-Partitioned index "testschema.test_index3"
- Column |  Type  | Key? | Definition 
---------+--------+------+------------
- id     | bigint | yes  | id
-primary key, btree, for table "testschema.test_default_tab_p"
-Number of partitions: 1 (Use \d+ to list them.)
-
-\d testschema.test_index4
-Partitioned index "testschema.test_index4"
- Column |  Type  | Key? | Definition 
---------+--------+------+------------
- id     | bigint | yes  | id
-unique, btree, for table "testschema.test_default_tab_p"
-Number of partitions: 1 (Use \d+ to list them.)
-Tablespace: "regress_tblspace"
-
--- use a custom tablespace for default_tablespace
-SET default_tablespace TO regress_tblspace;
--- tablespace should not change if no rewrite
-ALTER TABLE testschema.test_default_tab_p ALTER val TYPE bigint;
-\d testschema.test_index1
-Partitioned index "testschema.test_index1"
- Column |  Type  | Key? | Definition 
---------+--------+------+------------
- val    | bigint | yes  | val
-btree, for table "testschema.test_default_tab_p"
-Number of partitions: 1 (Use \d+ to list them.)
-
-\d testschema.test_index2
-Partitioned index "testschema.test_index2"
- Column |  Type  | Key? | Definition 
---------+--------+------+------------
- val    | bigint | yes  | val
-btree, for table "testschema.test_default_tab_p"
-Number of partitions: 1 (Use \d+ to list them.)
-Tablespace: "regress_tblspace"
-
-\d testschema.test_index3
-Partitioned index "testschema.test_index3"
- Column |  Type  | Key? | Definition 
---------+--------+------+------------
- id     | bigint | yes  | id
-primary key, btree, for table "testschema.test_default_tab_p"
-Number of partitions: 1 (Use \d+ to list them.)
-
-\d testschema.test_index4
-Partitioned index "testschema.test_index4"
- Column |  Type  | Key? | Definition 
---------+--------+------+------------
- id     | bigint | yes  | id
-unique, btree, for table "testschema.test_default_tab_p"
-Number of partitions: 1 (Use \d+ to list them.)
-Tablespace: "regress_tblspace"
-
-SELECT * FROM testschema.test_default_tab_p;
- id | val 
-----+-----
-  1 |    
-(1 row)
-
--- tablespace should not change even if there is an index rewrite
-ALTER TABLE testschema.test_default_tab_p ALTER val TYPE int;
-\d testschema.test_index1
-Partitioned index "testschema.test_index1"
- Column |  Type   | Key? | Definition 
---------+---------+------+------------
- val    | integer | yes  | val
-btree, for table "testschema.test_default_tab_p"
-Number of partitions: 1 (Use \d+ to list them.)
-
-\d testschema.test_index2
-Partitioned index "testschema.test_index2"
- Column |  Type   | Key? | Definition 
---------+---------+------+------------
- val    | integer | yes  | val
-btree, for table "testschema.test_default_tab_p"
-Number of partitions: 1 (Use \d+ to list them.)
-Tablespace: "regress_tblspace"
-
-\d testschema.test_index3
-Partitioned index "testschema.test_index3"
- Column |  Type  | Key? | Definition 
---------+--------+------+------------
- id     | bigint | yes  | id
-primary key, btree, for table "testschema.test_default_tab_p"
-Number of partitions: 1 (Use \d+ to list them.)
-
-\d testschema.test_index4
-Partitioned index "testschema.test_index4"
- Column |  Type  | Key? | Definition 
---------+--------+------+------------
- id     | bigint | yes  | id
-unique, btree, for table "testschema.test_default_tab_p"
-Number of partitions: 1 (Use \d+ to list them.)
-Tablespace: "regress_tblspace"
-
-SELECT * FROM testschema.test_default_tab_p;
- id | val 
-----+-----
-  1 |    
-(1 row)
-
--- now use the default tablespace for default_tablespace
-SET default_tablespace TO '';
--- tablespace should not change if no rewrite
-ALTER TABLE testschema.test_default_tab_p ALTER val TYPE int;
-\d testschema.test_index1
-Partitioned index "testschema.test_index1"
- Column |  Type   | Key? | Definition 
---------+---------+------+------------
- val    | integer | yes  | val
-btree, for table "testschema.test_default_tab_p"
-Number of partitions: 1 (Use \d+ to list them.)
-
-\d testschema.test_index2
-Partitioned index "testschema.test_index2"
- Column |  Type   | Key? | Definition 
---------+---------+------+------------
- val    | integer | yes  | val
-btree, for table "testschema.test_default_tab_p"
-Number of partitions: 1 (Use \d+ to list them.)
-Tablespace: "regress_tblspace"
-
-\d testschema.test_index3
-Partitioned index "testschema.test_index3"
- Column |  Type  | Key? | Definition 
---------+--------+------+------------
- id     | bigint | yes  | id
-primary key, btree, for table "testschema.test_default_tab_p"
-Number of partitions: 1 (Use \d+ to list them.)
-
-\d testschema.test_index4
-Partitioned index "testschema.test_index4"
- Column |  Type  | Key? | Definition 
---------+--------+------+------------
- id     | bigint | yes  | id
-unique, btree, for table "testschema.test_default_tab_p"
-Number of partitions: 1 (Use \d+ to list them.)
-Tablespace: "regress_tblspace"
-
--- tablespace should not change even if there is an index rewrite
-ALTER TABLE testschema.test_default_tab_p ALTER val TYPE bigint;
-\d testschema.test_index1
-Partitioned index "testschema.test_index1"
- Column |  Type  | Key? | Definition 
---------+--------+------+------------
- val    | bigint | yes  | val
-btree, for table "testschema.test_default_tab_p"
-Number of partitions: 1 (Use \d+ to list them.)
-
-\d testschema.test_index2
-Partitioned index "testschema.test_index2"
- Column |  Type  | Key? | Definition 
---------+--------+------+------------
- val    | bigint | yes  | val
-btree, for table "testschema.test_default_tab_p"
-Number of partitions: 1 (Use \d+ to list them.)
-Tablespace: "regress_tblspace"
-
-\d testschema.test_index3
-Partitioned index "testschema.test_index3"
- Column |  Type  | Key? | Definition 
---------+--------+------+------------
- id     | bigint | yes  | id
-primary key, btree, for table "testschema.test_default_tab_p"
-Number of partitions: 1 (Use \d+ to list them.)
-
-\d testschema.test_index4
-Partitioned index "testschema.test_index4"
- Column |  Type  | Key? | Definition 
---------+--------+------+------------
- id     | bigint | yes  | id
-unique, btree, for table "testschema.test_default_tab_p"
-Number of partitions: 1 (Use \d+ to list them.)
-Tablespace: "regress_tblspace"
-
-DROP TABLE testschema.test_default_tab_p;
--- check that default_tablespace affects index additions in ALTER TABLE
-CREATE TABLE testschema.test_tab(id int) TABLESPACE regress_tblspace;
-INSERT INTO testschema.test_tab VALUES (1);
-SET default_tablespace TO regress_tblspace;
-ALTER TABLE testschema.test_tab ADD CONSTRAINT test_tab_unique UNIQUE (id);
-SET default_tablespace TO '';
-ALTER TABLE testschema.test_tab ADD CONSTRAINT test_tab_pkey PRIMARY KEY (id);
-\d testschema.test_tab_unique
-  Index "testschema.test_tab_unique"
- Column |  Type   | Key? | Definition 
---------+---------+------+------------
- id     | integer | yes  | id
-unique, btree, for table "testschema.test_tab"
-Tablespace: "regress_tblspace"
-
-\d testschema.test_tab_pkey
-   Index "testschema.test_tab_pkey"
- Column |  Type   | Key? | Definition 
---------+---------+------+------------
- id     | integer | yes  | id
-primary key, btree, for table "testschema.test_tab"
-
-SELECT * FROM testschema.test_tab;
- id 
-----
-  1
-(1 row)
-
-DROP TABLE testschema.test_tab;
--- check that default_tablespace is handled correctly by multi-command
--- ALTER TABLE that includes a tablespace-preserving rewrite
-CREATE TABLE testschema.test_tab(a int, b int, c int);
-SET default_tablespace TO regress_tblspace;
-ALTER TABLE testschema.test_tab ADD CONSTRAINT test_tab_unique UNIQUE (a);
-CREATE INDEX test_tab_a_idx ON testschema.test_tab (a);
-SET default_tablespace TO '';
-CREATE INDEX test_tab_b_idx ON testschema.test_tab (b);
-\d testschema.test_tab_unique
-  Index "testschema.test_tab_unique"
- Column |  Type   | Key? | Definition 
---------+---------+------+------------
- a      | integer | yes  | a
-unique, btree, for table "testschema.test_tab"
-Tablespace: "regress_tblspace"
-
-\d testschema.test_tab_a_idx
-  Index "testschema.test_tab_a_idx"
- Column |  Type   | Key? | Definition 
---------+---------+------+------------
- a      | integer | yes  | a
-btree, for table "testschema.test_tab"
-Tablespace: "regress_tblspace"
-
-\d testschema.test_tab_b_idx
-  Index "testschema.test_tab_b_idx"
- Column |  Type   | Key? | Definition 
---------+---------+------+------------
- b      | integer | yes  | b
-btree, for table "testschema.test_tab"
-
-ALTER TABLE testschema.test_tab ALTER b TYPE bigint, ADD UNIQUE (c);
-\d testschema.test_tab_unique
-  Index "testschema.test_tab_unique"
- Column |  Type   | Key? | Definition 
---------+---------+------+------------
- a      | integer | yes  | a
-unique, btree, for table "testschema.test_tab"
-Tablespace: "regress_tblspace"
-
-\d testschema.test_tab_a_idx
-  Index "testschema.test_tab_a_idx"
- Column |  Type   | Key? | Definition 
---------+---------+------+------------
- a      | integer | yes  | a
-btree, for table "testschema.test_tab"
-Tablespace: "regress_tblspace"
-
-\d testschema.test_tab_b_idx
-  Index "testschema.test_tab_b_idx"
- Column |  Type  | Key? | Definition 
---------+--------+------+------------
- b      | bigint | yes  | b
-btree, for table "testschema.test_tab"
-
-DROP TABLE testschema.test_tab;
--- let's try moving a table from one place to another
-CREATE TABLE testschema.atable AS VALUES (1), (2);
-CREATE UNIQUE INDEX anindex ON testschema.atable(column1);
-ALTER TABLE testschema.atable SET TABLESPACE regress_tblspace;
-ALTER INDEX testschema.anindex SET TABLESPACE regress_tblspace;
-ALTER INDEX testschema.part_a_idx SET TABLESPACE pg_global;
-ERROR:  only shared relations can be placed in pg_global tablespace
-ALTER INDEX testschema.part_a_idx SET TABLESPACE pg_default;
-ALTER INDEX testschema.part_a_idx SET TABLESPACE regress_tblspace;
-INSERT INTO testschema.atable VALUES(3);	-- ok
-INSERT INTO testschema.atable VALUES(1);	-- fail (checks index)
-ERROR:  duplicate key value violates unique constraint "anindex"
-DETAIL:  Key (column1)=(1) already exists.
-SELECT COUNT(*) FROM testschema.atable;		-- checks heap
- count 
--------
-     3
-(1 row)
-
--- let's try moving a materialized view from one place to another
-CREATE MATERIALIZED VIEW testschema.amv AS SELECT * FROM testschema.atable;
-ALTER MATERIALIZED VIEW testschema.amv SET TABLESPACE regress_tblspace;
-REFRESH MATERIALIZED VIEW testschema.amv;
-SELECT COUNT(*) FROM testschema.amv;
- count 
--------
-     3
-(1 row)
-
--- Will fail with bad path
-CREATE TABLESPACE regress_badspace LOCATION '/no/such/location';
-ERROR:  directory "/no/such/location" does not exist
--- No such tablespace
-CREATE TABLE bar (i int) TABLESPACE regress_nosuchspace;
-ERROR:  tablespace "regress_nosuchspace" does not exist
--- Fail, in use for some partitioned object
-DROP TABLESPACE regress_tblspace;
-ERROR:  tablespace "regress_tblspace" cannot be dropped because some objects depend on it
-DETAIL:  tablespace for index testschema.part_a_idx
-ALTER INDEX testschema.part_a_idx SET TABLESPACE pg_default;
--- Fail, not empty
-DROP TABLESPACE regress_tblspace;
-ERROR:  tablespace "regress_tblspace" is not empty
-CREATE ROLE regress_tablespace_user1 login;
-CREATE ROLE regress_tablespace_user2 login;
-GRANT USAGE ON SCHEMA testschema TO regress_tablespace_user2;
-ALTER TABLESPACE regress_tblspace OWNER TO regress_tablespace_user1;
-CREATE TABLE testschema.tablespace_acl (c int);
--- new owner lacks permission to create this index from scratch
-CREATE INDEX k ON testschema.tablespace_acl (c) TABLESPACE regress_tblspace;
-ALTER TABLE testschema.tablespace_acl OWNER TO regress_tablespace_user2;
-SET SESSION ROLE regress_tablespace_user2;
-CREATE TABLE tablespace_table (i int) TABLESPACE regress_tblspace; -- fail
-ERROR:  permission denied for tablespace regress_tblspace
-ALTER TABLE testschema.tablespace_acl ALTER c TYPE bigint;
-REINDEX (TABLESPACE regress_tblspace) TABLE tablespace_table; -- fail
-ERROR:  permission denied for tablespace regress_tblspace
-REINDEX (TABLESPACE regress_tblspace, CONCURRENTLY) TABLE tablespace_table; -- fail
-ERROR:  permission denied for tablespace regress_tblspace
-RESET ROLE;
-ALTER TABLESPACE regress_tblspace RENAME TO regress_tblspace_renamed;
-ALTER TABLE ALL IN TABLESPACE regress_tblspace_renamed SET TABLESPACE pg_default;
-ALTER INDEX ALL IN TABLESPACE regress_tblspace_renamed SET TABLESPACE pg_default;
-ALTER MATERIALIZED VIEW ALL IN TABLESPACE regress_tblspace_renamed SET TABLESPACE pg_default;
--- Should show notice that nothing was done
-ALTER TABLE ALL IN TABLESPACE regress_tblspace_renamed SET TABLESPACE pg_default;
-NOTICE:  no matching relations in tablespace "regress_tblspace_renamed" found
-ALTER MATERIALIZED VIEW ALL IN TABLESPACE regress_tblspace_renamed SET TABLESPACE pg_default;
-NOTICE:  no matching relations in tablespace "regress_tblspace_renamed" found
--- Should succeed
-DROP TABLESPACE regress_tblspace_renamed;
-DROP SCHEMA testschema CASCADE;
-NOTICE:  drop cascades to 7 other objects
-DETAIL:  drop cascades to table testschema.foo
-drop cascades to table testschema.asselect
-drop cascades to table testschema.asexecute
-drop cascades to table testschema.part
-drop cascades to table testschema.atable
-drop cascades to materialized view testschema.amv
-drop cascades to table testschema.tablespace_acl
-DROP ROLE regress_tablespace_user1;
-DROP ROLE regress_tablespace_user2;
+psql: error: connection to server on socket "/tmp/f_SDOOqtof/.s.PGSQL.16412" failed: No such file or directory
+	Is the server running locally and accepting connections on that socket?