Synopsis
/define.gitCommit=a05a9cae0756b1ebcb1f29726a172b0ac0f43356
Running Suite: Podman Machine tests - C:\Users\Administrator\AppData\Local\cirrus-ci-build\repo\pkg\machine\e2e
===============================================================================================================
Random Seed: 1721657935
Will run 59 of 59 specs
[BeforeSuite]
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:56
→ Enter [
BeforeSuite] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:56 @ 07/22/24 14:20:09.234
Looking up Podman Machine image at quay.io/podman/machine-os:5.2 to create VM
Getting image source signatures
Copying blob sha256:ab2fa485a5dbf32ad0cd6a5994bf9877ebcce035a6620d5c6cfb9520949fb02e
Copying config sha256:44136fa355b3678a1146ad16f7e8649e94fb4fc21fe77e8310c060f61caaff8a
Writing manifest to image destination
ab2fa485a5dbf32ad0cd6a5994bf9877ebcce035a6620d5c6cfb9520949fb02e
← Exit [BeforeSuite] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:56 @ 07/22/24 14:20:35.399 (26.166s)
[BeforeSuite] PASSED [26.166 seconds]
podman machine rm
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/rm_test.go:14
bad init name
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/rm_test.go:16
→ Enter [
It] bad init name - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/rm_test.go:16 @ 07/22/24 14:20:35.409
C>
podman.exe machine rm abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
Error: abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ: VM does not exist
← Exit [It] bad init name - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/rm_test.go:16 @ 07/22/24 14:20:35.535 (126ms)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:20:35.535
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:20:35.539 (3ms)
+ [0.140 seconds]
podman machine rm
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/rm_test.go:14
Remove machine
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/rm_test.go:24
→ Enter [
It] Remove machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/rm_test.go:24 @ 07/22/24 14:20:35.539
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 0c7ee86fac36
Machine init complete
To start your machine run:
podman machine start 0c7ee86fac36
C>
podman.exe machine rm --force 0c7ee86fac36
C>
podman.exe machine inspect 0c7ee86fac36
[]
Error: 0c7ee86fac36: VM does not exist
C>
podman.exe machine rm --force 0c7ee86fac36
Error: 0c7ee86fac36: VM does not exist
← Exit [It] Remove machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/rm_test.go:24 @ 07/22/24 14:21:07.95 (32.411s)
> Enter [DeferCleanup (Each)] podman machine rm - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:21:07.95
C>
podman.exe machine rm --force 0c7ee86fac36
Error: 0c7ee86fac36: VM does not exist
< Exit [DeferCleanup (Each)] podman machine rm - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:21:08.081 (131ms)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:21:08.081
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:21:08.086 (5ms)
+ [32.548 seconds]
podman machine rm
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/rm_test.go:14
Remove running machine
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/rm_test.go:48
→ Enter [
It] Remove running machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/rm_test.go:48 @ 07/22/24 14:21:08.088
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx --now c8899045137f
Machine init complete
Starting machine "c8899045137f"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful c8899045137f
API forwarding listening on: npipe:////./pipe/docker_engine
Docker API clients default to this address. You do not need to set DOCKER_HOST.
Machine "c8899045137f" started successfully
C>
podman.exe machine rm c8899045137f
Error: running vm "c8899045137f" cannot be destroyed
C>
podman.exe machine rm --force c8899045137f
C>
podman.exe machine inspect c8899045137f
[]
Error: c8899045137f: VM does not exist
← Exit [It] Remove running machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/rm_test.go:48 @ 07/22/24 14:21:57.933 (49.846s)
> Enter [DeferCleanup (Each)] podman machine rm - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:21:57.933
C>
podman.exe machine rm --force c8899045137f
Error: c8899045137f: VM does not exist
< Exit [DeferCleanup (Each)] podman machine rm - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:21:58.061 (128ms)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:21:58.061
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:21:58.067 (5ms)
+ [49.980 seconds]
podman machine rm
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/rm_test.go:14
machine rm --save-ignition --save-image
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/rm_test.go:73
→ Enter [
It] machine rm --save-ignition --save-image - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/rm_test.go:73 @ 07/22/24 14:21:58.068
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx fc657b4ce586
Machine init complete
To start your machine run:
podman machine start fc657b4ce586
C>
podman.exe machine inspect --format {{.SSHConfig.IdentityPath}} fc657b4ce586
C:\Users\ADMINI~1\AppData\Local\Temp\podman_test1132723530\.local\share\containers\podman\machine\machine
C>
podman.exe machine rm --force --save-ignition --save-image fc657b4ce586
C>
podman.exe machine inspect fc657b4ce586
[]
Error: fc657b4ce586: VM does not exist
← Exit [It] machine rm --save-ignition --save-image - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/rm_test.go:73 @ 07/22/24 14:22:18.622 (20.554s)
> Enter [DeferCleanup (Each)] podman machine rm - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:22:18.622
C>
podman.exe machine rm --force fc657b4ce586
Error: fc657b4ce586: VM does not exist
< Exit [DeferCleanup (Each)] podman machine rm - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:22:18.747 (125ms)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:22:18.747
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:22:18.752 (5ms)
+ [20.685 seconds]
podman machine rm
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/rm_test.go:14
Remove machine sharing ssh key with another machine
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/rm_test.go:112
→ Enter [
It] Remove machine sharing ssh key with another machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/rm_test.go:112 @ 07/22/24 14:22:18.752
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx foo
Machine init complete
To start your machine run:
podman machine start foo
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx --now bar
Machine init complete
Starting machine "bar"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful bar
API forwarding listening on: npipe:////./pipe/docker_engine
Docker API clients default to this address. You do not need to set DOCKER_HOST.
Machine "bar" started successfully
C>
podman.exe machine inspect --format {{.SSHConfig.IdentityPath}} foo
C:\Users\ADMINI~1\AppData\Local\Temp\podman_test90749717\.local\share\containers\podman\machine\machine
C>
podman.exe machine inspect --format {{.SSHConfig.IdentityPath}} bar
C:\Users\ADMINI~1\AppData\Local\Temp\podman_test90749717\.local\share\containers\podman\machine\machine
C>
podman.exe machine rm --force foo
C>
podman.exe machine ssh bar echo foo
foo
← Exit [It] Remove machine sharing ssh key with another machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/rm_test.go:112 @ 07/22/24 14:23:25.672 (1m6.92s)
> Enter [DeferCleanup (Each)] podman machine rm - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:23:25.672
C>
podman.exe machine rm --force bar
< Exit [DeferCleanup (Each)] podman machine rm - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:23:28.323 (2.651s)
> Enter [DeferCleanup (Each)] podman machine rm - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:23:28.323
C>
podman.exe machine rm --force foo
Error: foo: VM does not exist
< Exit [DeferCleanup (Each)] podman machine rm - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:23:28.438 (115ms)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:23:28.438
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:23:28.444 (6ms)
+ [69.693 seconds]
podman machine rm
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/rm_test.go:14
Removing all machines doesn't delete ssh keys
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/rm_test.go:154
→ Enter [
It] Removing all machines doesn't delete ssh keys - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/rm_test.go:154 @ 07/22/24 14:23:28.444
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx foo
Machine init complete
To start your machine run:
podman machine start foo
C>
podman.exe machine inspect --format {{.SSHConfig.IdentityPath}} foo
C:\Users\ADMINI~1\AppData\Local\Temp\podman_test2469707900\.local\share\containers\podman\machine\machine
C>
podman.exe machine rm --force foo
← Exit [It] Removing all machines doesn't delete ssh keys - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/rm_test.go:154 @ 07/22/24 14:23:48.582 (20.138s)
> Enter [DeferCleanup (Each)] podman machine rm - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:23:48.582
C>
podman.exe machine rm --force foo
Error: foo: VM does not exist
< Exit [DeferCleanup (Each)] podman machine rm - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:23:48.699 (117ms)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:23:48.699
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:23:48.703 (4ms)
+ [20.259 seconds]
podman inspect stop
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/inspect_test.go:13
inspect two machines
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/inspect_test.go:23
→ Enter [
It] inspect two machines - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/inspect_test.go:23 @ 07/22/24 14:23:48.838
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx foo1
Machine init complete
To start your machine run:
podman machine start foo1
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx foo2
Machine init complete
To start your machine run:
podman machine start foo2
C>
podman.exe machine inspect --format {{.Name}} foo1
foo1
← Exit [It] inspect two machines - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/inspect_test.go:23 @ 07/22/24 14:24:25.907 (37.069s)
> Enter [DeferCleanup (Each)] podman inspect stop - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:24:25.907
C>
podman.exe machine rm --force foo2
< Exit [DeferCleanup (Each)] podman inspect stop - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:24:27.332 (1.425s)
> Enter [DeferCleanup (Each)] podman inspect stop - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:24:27.332
C>
podman.exe machine rm --force foo1
< Exit [DeferCleanup (Each)] podman inspect stop - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:24:28.726 (1.394s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:24:28.726
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:24:28.727 (2ms)
+ [39.890 seconds]
podman inspect stop
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/inspect_test.go:13
inspect with go format
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/inspect_test.go:42
→ Enter [
It] inspect with go format - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/inspect_test.go:42 @ 07/22/24 14:24:28.727
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx faabb77aa1e2
Machine init complete
To start your machine run:
podman machine start faabb77aa1e2
C>
podman.exe machine inspect faabb77aa1e2
[
{
"ConfigDir": {
"Path": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test3930081194\\.config\\containers\\podman\\machine\\hyperv"
},
"ConnectionInfo": {
"PodmanSocket": null,
"PodmanPipe": {
"Path": "\\\\.\\pipe\\podman-faabb77aa1e2"
}
},
"Created": "2024-07-22T14:24:28.88357Z",
"LastUp": "0001-01-01T00:00:00Z",
"Name": "faabb77aa1e2",
"Resources": {
"CPUs": 24,
"DiskSize": 11,
"Memory": 2048,
"USBs": []
},
"SSHConfig": {
"IdentityPath": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test3930081194\\.local\\share\\containers\\podman\\machine\\machine",
"Port": 50075,
"RemoteUsername": "core"
},
"State": "stopped",
"UserModeNetworking": true,
"Rootful": false,
"Rosetta": false
}
]
C>
podman.exe machine inspect --format {{.Name}} faabb77aa1e2
faabb77aa1e2
C>
podman.exe machine inspect --format {{.Abcde}} faabb77aa1e2
Error: template: inspect:1:13: executing "inspect" at <.Abcde>: can't evaluate field Abcde in type machine.InspectInfo
← Exit [It] inspect with go format - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/inspect_test.go:42 @ 07/22/24 14:24:47.86 (19.133s)
> Enter [DeferCleanup (Each)] podman inspect stop - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:24:47.86
C>
podman.exe machine rm --force faabb77aa1e2
< Exit [DeferCleanup (Each)] podman inspect stop - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:24:49.277 (1.417s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:24:49.277
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:24:49.282 (5ms)
+ [20.555 seconds]
podman machine init
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:22
bad init
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:28
→ Enter [
It] bad init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:28 @ 07/22/24 14:24:49.285
C>
podman.exe machine init --disk-size 11 abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
Error: machine name "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ" must be 30 characters or less
C>
podman.exe machine init --disk-size 11 hyperv
Error: cannot use "hyperv" for a machine name
C>
podman.exe -r system connection add foobar tcp://localhost:8000
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx foobar
Error: system connection "foobar" already exists. consider a different machine name or remove the connection with `podman system connection rm`
C>
podman.exe machine init --disk-size 11 ab/cd
Error: invalid name "ab/cd": names must match [a-zA-Z0-9][a-zA-Z0-9_.-]*: invalid argument
C>
podman.exe machine init --disk-size 11 --username -/a 09ef2e21e436
Error: invalid username "-/a": names must match [a-zA-Z0-9][a-zA-Z0-9_.-]*: invalid argument
C>
podman.exe machine init --disk-size 11 --memory 197265 09ef2e21e436
Error: requested amount of memory (197265 MB) greater than total system memory (205773746176 MB)
C>
podman.exe -r system connection rm foobar
← Exit [It] bad init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:28 @ 07/22/24 14:24:50.35 (1.064s)
> Enter [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:24:50.35
C>
podman.exe machine rm --force 09ef2e21e436
Error: 09ef2e21e436: VM does not exist
< Exit [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:24:50.474 (124ms)
> Enter [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:24:50.474
C>
podman.exe machine rm --force 09ef2e21e436
Error: 09ef2e21e436: VM does not exist
< Exit [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:24:50.598 (124ms)
> Enter [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:24:50.599
C>
podman.exe machine rm --force ab/cd
Error: ab/cd: VM does not exist
< Exit [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:24:50.718 (119ms)
> Enter [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:24:50.718
C>
podman.exe machine rm --force foobar
Error: foobar: VM does not exist
< Exit [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:24:50.845 (128ms)
> Enter [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:24:50.845
C>
podman.exe machine rm --force hyperv
Error: hyperv: VM does not exist
< Exit [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:24:50.97 (125ms)
> Enter [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:24:50.97
C>
podman.exe machine rm --force abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
Error: abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ: VM does not exist
< Exit [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:24:51.095 (125ms)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:24:51.095
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:24:51.099 (4ms)
+ [1.815 seconds]
podman machine init
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:22
simple init
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:82
→ Enter [
It] simple init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:82 @ 07/22/24 14:24:51.099
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 1a8cb6ecee75
Machine init complete
To start your machine run:
podman machine start 1a8cb6ecee75
C>
podman.exe machine inspect 1a8cb6ecee75
[
{
"ConfigDir": {
"Path": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test4078138523\\.config\\containers\\podman\\machine\\hyperv"
},
"ConnectionInfo": {
"PodmanSocket": null,
"PodmanPipe": {
"Path": "\\\\.\\pipe\\podman-1a8cb6ecee75"
}
},
"Created": "2024-07-22T14:24:51.2606505Z",
"LastUp": "0001-01-01T00:00:00Z",
"Name": "1a8cb6ecee75",
"Resources": {
"CPUs": 24,
"DiskSize": 11,
"Memory": 2048,
"USBs": []
},
"SSHConfig": {
"IdentityPath": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test4078138523\\.local\\share\\containers\\podman\\machine\\machine",
"Port": 50081,
"RemoteUsername": "core"
},
"State": "stopped",
"UserModeNetworking": true,
"Rootful": false,
"Rosetta": false
}
]
← Exit [It] simple init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:82 @ 07/22/24 14:25:09.72 (18.621s)
> Enter [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:25:09.72
C>
podman.exe machine rm --force 1a8cb6ecee75
< Exit [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:25:10.961 (1.242s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:25:10.961
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:25:10.961 (0s)
+ [19.863 seconds]
podman machine init
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:22
simple init with start
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:101
→ Enter [
It] simple init with start - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:101 @ 07/22/24 14:25:10.961
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx f7ba832ca437
Machine init complete
To start your machine run:
podman machine start f7ba832ca437
C>
podman.exe machine inspect f7ba832ca437
[
{
"ConfigDir": {
"Path": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test284009448\\.config\\containers\\podman\\machine\\hyperv"
},
"ConnectionInfo": {
"PodmanSocket": null,
"PodmanPipe": {
"Path": "\\\\.\\pipe\\podman-f7ba832ca437"
}
},
"Created": "2024-07-22T14:25:11.1232531Z",
"LastUp": "0001-01-01T00:00:00Z",
"Name": "f7ba832ca437",
"Resources": {
"CPUs": 24,
"DiskSize": 11,
"Memory": 2048,
"USBs": []
},
"SSHConfig": {
"IdentityPath": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test284009448\\.local\\share\\containers\\podman\\machine\\machine",
"Port": 50087,
"RemoteUsername": "core"
},
"State": "stopped",
"UserModeNetworking": true,
"Rootful": false,
"Rosetta": false
}
]
C>
podman.exe machine start f7ba832ca437
Starting machine "f7ba832ca437"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful f7ba832ca437
API forwarding listening on: npipe:////./pipe/docker_engine
Docker API clients default to this address. You do not need to set DOCKER_HOST.
Machine "f7ba832ca437" started successfully
C>
podman.exe machine inspect f7ba832ca437
[
{
"ConfigDir": {
"Path": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test284009448\\.config\\containers\\podman\\machine\\hyperv"
},
"ConnectionInfo": {
"PodmanSocket": null,
"PodmanPipe": {
"Path": "\\\\.\\pipe\\podman-f7ba832ca437"
}
},
"Created": "2024-07-22T14:25:11.1232531Z",
"LastUp": "0001-01-01T00:00:00Z",
"Name": "f7ba832ca437",
"Resources": {
"CPUs": 24,
"DiskSize": 11,
"Memory": 2048,
"USBs": []
},
"SSHConfig": {
"IdentityPath": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test284009448\\.local\\share\\containers\\podman\\machine\\machine",
"Port": 50087,
"RemoteUsername": "core"
},
"State": "running",
"UserModeNetworking": true,
"Rootful": false,
"Rosetta": false
}
]
C>
podman.exe machine ssh f7ba832ca437 sudo systemctl is-enabled zincati
disabled
← Exit [It] simple init with start - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:101 @ 07/22/24 14:25:57.522 (46.561s)
> Enter [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:25:57.522
C>
podman.exe machine rm --force f7ba832ca437
< Exit [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:26:00.368 (2.846s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:26:00.368
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:26:00.371 (3ms)
+ [49.410 seconds]
podman machine init
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:22
simple init with username
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:137
→ Enter [
It] simple init with username - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:137 @ 07/22/24 14:26:00.371
C>
podman.exe machine init --disk-size 11 --username remoteuser --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 984610dabefe
Machine init complete
To start your machine run:
podman machine start 984610dabefe
C>
podman.exe machine inspect 984610dabefe
[
{
"ConfigDir": {
"Path": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test4285737546\\.config\\containers\\podman\\machine\\hyperv"
},
"ConnectionInfo": {
"PodmanSocket": null,
"PodmanPipe": {
"Path": "\\\\.\\pipe\\podman-984610dabefe"
}
},
"Created": "2024-07-22T14:26:00.5235474Z",
"LastUp": "0001-01-01T00:00:00Z",
"Name": "984610dabefe",
"Resources": {
"CPUs": 24,
"DiskSize": 11,
"Memory": 2048,
"USBs": []
},
"SSHConfig": {
"IdentityPath": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test4285737546\\.local\\share\\containers\\podman\\machine\\machine",
"Port": 50102,
"RemoteUsername": "remoteuser"
},
"State": "stopped",
"UserModeNetworking": true,
"Rootful": false,
"Rosetta": false
}
]
← Exit [It] simple init with username - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:137 @ 07/22/24 14:26:19.559 (19.188s)
> Enter [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:26:19.559
C>
podman.exe machine rm --force 984610dabefe
< Exit [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:26:20.922 (1.363s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:26:20.922
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:26:20.922 (0s)
+ [20.552 seconds]
podman machine init
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:22
machine init with cpus, disk size, memory, timezone
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:159
→ Enter [
It] machine init with cpus, disk size, memory, timezone - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:159 @ 07/22/24 14:26:20.922
C>
podman.exe machine init --cpus 2 --disk-size 102 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx --memory 4096 --timezone Pacific/Honolulu 0204a8318ff3
Machine init complete
To start your machine run:
podman machine start 0204a8318ff3
C>
podman.exe machine start 0204a8318ff3
Starting machine "0204a8318ff3"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful 0204a8318ff3
API forwarding listening on: npipe:////./pipe/docker_engine
Docker API clients default to this address. You do not need to set DOCKER_HOST.
Machine "0204a8318ff3" started successfully
C>
podman.exe machine ssh 0204a8318ff3 lscpu | grep "CPU(s):" | head -1
CPU(s): 2
C>
podman.exe machine ssh 0204a8318ff3 sudo fdisk -l | grep Disk
Disk /dev/sda: 102 GiB, 109521666048 bytes, 213909504 sectors
Disk model: Virtual Disk
Disklabel type: gpt
Disk identifier: 17841A89-543F-41CE-B05A-E22C759CD101
C>
podman.exe machine ssh 0204a8318ff3 cat /proc/meminfo | grep -i 'memtotal' | grep -o '[[:digit:]]*'
4002240
C>
podman.exe machine ssh 0204a8318ff3 date
Mon Jul 22 04:27:26 HST 2024
← Exit [It] machine init with cpus, disk size, memory, timezone - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:159 @ 07/22/24 14:27:26.349 (1m5.427s)
> Enter [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:27:26.349
C>
podman.exe machine rm --force 0204a8318ff3
< Exit [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:27:29.02 (2.671s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:27:29.02
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:27:29.02 (0s)
+ [68.097 seconds]
podman machine init
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:22
machine init rootless docker.sock check
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:227
→ Enter [
It] machine init rootless docker.sock check - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:227 @ 07/22/24 14:27:29.02
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 739482d9f212
Machine init complete
To start your machine run:
podman machine start 739482d9f212
C>
podman.exe machine start 739482d9f212
Starting machine "739482d9f212"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful 739482d9f212
API forwarding listening on: npipe:////./pipe/docker_engine
Docker API clients default to this address. You do not need to set DOCKER_HOST.
Machine "739482d9f212" started successfully
C>
podman.exe machine ssh 739482d9f212 readlink /var/run/docker.sock
/run/user/1000/podman/podman.sock
← Exit [It] machine init rootless docker.sock check - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:227 @ 07/22/24 14:28:17.814 (48.794s)
> Enter [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:28:17.814
C>
podman.exe machine rm --force 739482d9f212
< Exit [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:28:20.538 (2.724s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:28:20.538
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:28:20.538 (0s)
+ [51.518 seconds]
podman machine init
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:22
machine init rootful with docker.sock check
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:250
→ Enter [
It] machine init rootful with docker.sock check - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:250 @ 07/22/24 14:28:20.538
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx --rootful 5afefcf368f8
Machine init complete
To start your machine run:
podman machine start 5afefcf368f8
C>
podman.exe machine start 5afefcf368f8
Starting machine "5afefcf368f8"
API forwarding listening on: npipe:////./pipe/docker_engine
Docker API clients default to this address. You do not need to set DOCKER_HOST.
Machine "5afefcf368f8" started successfully
C>
podman.exe machine inspect --format {{.Rootful}} 5afefcf368f8
true
C>
podman.exe machine ssh 5afefcf368f8 readlink /var/run/docker.sock
/run/podman/podman.sock
← Exit [It] machine init rootful with docker.sock check - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:250 @ 07/22/24 14:29:05.934 (45.396s)
> Enter [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:29:05.934
C>
podman.exe machine rm --force 5afefcf368f8
< Exit [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:29:08.71 (2.776s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:29:08.71
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:29:08.712 (2ms)
+ [48.175 seconds]
podman machine init
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:22
init should cleanup on failure
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:277
→ Enter [
It] init should cleanup on failure - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:277 @ 07/22/24 14:29:08.712
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 9f6e54ae9a8c
Machine init complete
To start your machine run:
podman machine start 9f6e54ae9a8c
C>
podman.exe machine inspect --format {{.ConfigDir.Path}} 9f6e54ae9a8c
C:\Users\ADMINI~1\AppData\Local\Temp\podman_test3946860746\.config\containers\podman\machine\hyperv
C>
podman.exe machine rm --force 9f6e54ae9a8c
C>
podman.exe machine inspect 9f6e54ae9a8c
[]
Error: 9f6e54ae9a8c: VM does not exist
C>
podman.exe machine init --disk-size 11 --ignition-path /bad/path --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 9f6e54ae9a8c
Error: open /bad/path: The system cannot find the path specified.
← Exit [It] init should cleanup on failure - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:277 @ 07/22/24 14:29:33.992 (25.28s)
> Enter [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:29:33.992
C>
podman.exe machine rm --force 9f6e54ae9a8c
Error: 9f6e54ae9a8c: VM does not exist
< Exit [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:29:34.127 (135ms)
> Enter [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:29:34.127
C>
podman.exe machine rm --force 9f6e54ae9a8c
Error: 9f6e54ae9a8c: VM does not exist
< Exit [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:29:34.258 (131ms)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:29:34.258
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:29:34.258 (0s)
+ [25.546 seconds]
podman machine init
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:22
verify a podman 4 config does not break podman 5
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:326
→ Enter [
It] verify a podman 4 config does not break podman 5 - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:326 @ 07/22/24 14:29:34.258
C>
podman.exe machine list
time=
"2024-07-22T14:29:34Z" level=
error msg=
"incompatible machine config \"C:\\\\Users\\\\ADMINI~1\\\\AppData\\\\Local\\\\Temp\\\\podman_test1810724469\\\\.config\\\\containers\\\\podman\\\\machine\\\\hyperv\\\\foobar-machine.json\" (podman-machine-default) for this version of Podman"
NAME VM TYPE CREATED LAST UP CPUS MEMORY DISK SIZE
C>
podman.exe machine inspect foobar-machine
[]
Error: incompatible machine config "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test1810724469\\.config\\containers\\podman\\machine\\hyperv\\foobar-machine.json" (foobar-machine) for this version of Podman
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 466d90691dbd
time=
"2024-07-22T14:29:34Z" level=
error msg=
"incompatible machine config \"C:\\\\Users\\\\ADMINI~1\\\\AppData\\\\Local\\\\Temp\\\\podman_test1810724469\\\\.config\\\\containers\\\\podman\\\\machine\\\\hyperv\\\\foobar-machine.json\" (podman-machine-default) for this version of Podman"
Machine init complete
To start your machine run:
podman machine start 466d90691dbd
C>
podman.exe machine list
time=
"2024-07-22T14:29:56Z" level=
error msg=
"incompatible machine config \"C:\\\\Users\\\\ADMINI~1\\\\AppData\\\\Local\\\\Temp\\\\podman_test1810724469\\\\.config\\\\containers\\\\podman\\\\machine\\\\hyperv\\\\foobar-machine.json\" (podman-machine-default) for this version of Podman"
NAME VM TYPE CREATED LAST UP CPUS MEMORY DISK SIZE
466d90691dbd* hyperv 21 seconds ago Never 24 2GiB 11GiB
C>
podman.exe machine inspect 466d90691dbd
[
{
"ConfigDir": {
"Path": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test1810724469\\.config\\containers\\podman\\machine\\hyperv"
},
"ConnectionInfo": {
"PodmanSocket": null,
"PodmanPipe": {
"Path": "\\\\.\\pipe\\podman-466d90691dbd"
}
},
"Created": "2024-07-22T14:29:34.6947637Z",
"LastUp": "0001-01-01T00:00:00Z",
"Name": "466d90691dbd",
"Resources": {
"CPUs": 24,
"DiskSize": 11,
"Memory": 2048,
"USBs": []
},
"SSHConfig": {
"IdentityPath": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test1810724469\\.local\\share\\containers\\podman\\machine\\machine",
"Port": 50195,
"RemoteUsername": "core"
},
"State": "stopped",
"UserModeNetworking": true,
"Rootful": false,
"Rosetta": false
}
]
← Exit [It] verify a podman 4 config does not break podman 5 - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:326 @ 07/22/24 14:29:56.499 (22.241s)
> Enter [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:29:56.499
C>
podman.exe machine rm --force 466d90691dbd
< Exit [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:29:57.72 (1.221s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:29:57.72
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:29:57.72 (0s)
+ [23.462 seconds]
podman machine start
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:16
start simple machine
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:18
→ Enter [
It] start simple machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:18 @ 07/22/24 14:29:57.725
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx b7fa53bccd21
Machine init complete
To start your machine run:
podman machine start b7fa53bccd21
C>
podman.exe machine start b7fa53bccd21
Starting machine "b7fa53bccd21"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful b7fa53bccd21
API forwarding listening on: npipe:////./pipe/docker_engine
Docker API clients default to this address. You do not need to set DOCKER_HOST.
Machine "b7fa53bccd21" started successfully
C>
podman.exe machine inspect b7fa53bccd21
[
{
"ConfigDir": {
"Path": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test2462280758\\.config\\containers\\podman\\machine\\hyperv"
},
"ConnectionInfo": {
"PodmanSocket": null,
"PodmanPipe": {
"Path": "\\\\.\\pipe\\podman-b7fa53bccd21"
}
},
"Created": "2024-07-22T14:29:57.8854408Z",
"LastUp": "0001-01-01T00:00:00Z",
"Name": "b7fa53bccd21",
"Resources": {
"CPUs": 24,
"DiskSize": 11,
"Memory": 2048,
"USBs": []
},
"SSHConfig": {
"IdentityPath": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test2462280758\\.local\\share\\containers\\podman\\machine\\machine",
"Port": 50201,
"RemoteUsername": "core"
},
"State": "running",
"UserModeNetworking": true,
"Rootful": false,
"Rosetta": false
}
]
C>
podman.exe machine stop b7fa53bccd21
Machine "b7fa53bccd21" stopped successfully
C>
podman.exe machine start b7fa53bccd21 --no-info
Starting machine "b7fa53bccd21"
Machine "b7fa53bccd21" started successfully
C>
podman.exe machine stop b7fa53bccd21
Machine "b7fa53bccd21" stopped successfully
C>
podman.exe machine start b7fa53bccd21 --quiet
Machine "b7fa53bccd21" started successfully
← Exit [It] start simple machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:18 @ 07/22/24 14:31:22.096 (1m24.371s)
> Enter [DeferCleanup (Each)] podman machine start - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:31:22.096
C>
podman.exe machine rm --force b7fa53bccd21
< Exit [DeferCleanup (Each)] podman machine start - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:31:24.748 (2.652s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:31:24.748
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:31:24.755 (7ms)
+ [87.030 seconds]
podman machine start
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:16
start machine already started
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:63
→ Enter [
It] start machine already started - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:63 @ 07/22/24 14:31:24.891
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx c7d17bbcd68b
Machine init complete
To start your machine run:
podman machine start c7d17bbcd68b
C>
podman.exe machine start c7d17bbcd68b
Starting machine "c7d17bbcd68b"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful c7d17bbcd68b
API forwarding listening on: npipe:////./pipe/docker_engine
Docker API clients default to this address. You do not need to set DOCKER_HOST.
Machine "c7d17bbcd68b" started successfully
C>
podman.exe machine inspect c7d17bbcd68b
[
{
"ConfigDir": {
"Path": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test1323744826\\.config\\containers\\podman\\machine\\hyperv"
},
"ConnectionInfo": {
"PodmanSocket": null,
"PodmanPipe": {
"Path": "\\\\.\\pipe\\podman-c7d17bbcd68b"
}
},
"Created": "2024-07-22T14:31:25.0426264Z",
"LastUp": "0001-01-01T00:00:00Z",
"Name": "c7d17bbcd68b",
"Resources": {
"CPUs": 24,
"DiskSize": 11,
"Memory": 2048,
"USBs": []
},
"SSHConfig": {
"IdentityPath": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test1323744826\\.local\\share\\containers\\podman\\machine\\machine",
"Port": 50228,
"RemoteUsername": "core"
},
"State": "running",
"UserModeNetworking": true,
"Rootful": false,
"Rosetta": false
}
]
C>
podman.exe machine start c7d17bbcd68b
Starting machine "c7d17bbcd68b"
Error: unable to start "c7d17bbcd68b": machine c7d17bbcd68b: VM already running or starting
← Exit [It] start machine already started - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:63 @ 07/22/24 14:32:09.561 (44.67s)
> Enter [DeferCleanup (Each)] podman machine start - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:32:09.561
C>
podman.exe machine rm --force c7d17bbcd68b
< Exit [DeferCleanup (Each)] podman machine start - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:32:12.41 (2.849s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:32:12.41
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:32:12.41 (0s)
+ [47.520 seconds]
podman machine start
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:16
start machine with conflict on SSH port
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:84
→ Enter [
It] start machine with conflict on SSH port - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:84 @ 07/22/24 14:32:12.41
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 026a3f4eaf52
Machine init complete
To start your machine run:
podman machine start 026a3f4eaf52
C>
podman.exe machine inspect --format {{.SSHConfig.Port}} 026a3f4eaf52
50242
C>
podman.exe system connection list --format {{.URI}}
ssh://core@127.0.0.1:50242/run/user/1000/podman/podman.sock
ssh://root@127.0.0.1:50242/run/podman/podman.sock
C>
podman.exe machine start 026a3f4eaf52
Starting machine "026a3f4eaf52"
time=
"2024-07-22T14:32:33Z" level=
warning msg=
"detected port conflict on machine ssh port [50242], reassigning"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful 026a3f4eaf52
API forwarding listening on: npipe:////./pipe/docker_engine
Docker API clients default to this address. You do not need to set DOCKER_HOST.
Machine "026a3f4eaf52" started successfully
C>
podman.exe machine inspect --format {{.SSHConfig.Port}} 026a3f4eaf52
50248
C>
podman.exe system connection list --format {{.URI}}
ssh://core@127.0.0.1:50248/run/user/1000/podman/podman.sock
ssh://root@127.0.0.1:50248/run/podman/podman.sock
← Exit [It] start machine with conflict on SSH port - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:84 @ 07/22/24 14:32:57.766 (45.354s)
> Enter [DeferCleanup (Each)] podman machine start - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:32:57.766
C>
podman.exe machine rm --force 026a3f4eaf52
< Exit [DeferCleanup (Each)] podman machine start - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:33:00.45 (2.684s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:33:00.45
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:33:00.45 (0s)
+ [48.038 seconds]
podman machine start
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:16
start only starts specified machine
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:133
→ Enter [
It] start only starts specified machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:133 @ 07/22/24 14:33:00.45
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx ac9b6350ee0e
Machine init complete
To start your machine run:
podman machine start ac9b6350ee0e
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx a37915b58dec
Machine init complete
To start your machine run:
podman machine start a37915b58dec
C>
podman.exe machine start ac9b6350ee0e
Starting machine "ac9b6350ee0e"
[FAILED] Timed out after 600.001s.
command timed out after 600.000000s: [C:\Users\Administrator\AppData\Local\cirrus-ci-build\repo\bin\windows\podman.exe machine start ac9b6350ee0e]
Expected process to exit. It did not.
In [It] at: C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_test.go:59 @ 07/22/24 14:43:39.743
Full Stack Trace
github.com/containers/podman/v5/pkg/machine/e2e_test.(*machineSession).waitWithTimeout(0xc0000d4098, 0x8bb2c97000)
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_test.go:59 +0x146
github.com/containers/podman/v5/pkg/machine/e2e_test.runWrapper({0xc0005251d0, 0x50}, {0xc0015ec1c0, 0x3, 0x4}, 0x8bb2c97000, 0x1)
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_test.go:213 +0x37a
github.com/containers/podman/v5/pkg/machine/e2e_test.(*machineTestBuilder).run(0xc0001fecb0?)
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_test.go:175 +0x33
github.com/containers/podman/v5/pkg/machine/e2e_test.init.func17.5()
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:147 +0x3a5
← Exit [It] start only starts specified machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:133 @ 07/22/24 14:43:39.743 (10m39.288s)
> Enter [DeferCleanup (Each)] podman machine start - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:43:39.744
C>
podman.exe machine rm --force a37915b58dec
< Exit [DeferCleanup (Each)] podman machine start - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:43:41.119 (1.375s)
> Enter [DeferCleanup (Each)] podman machine start - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:43:41.119
C>
podman.exe machine rm --force ac9b6350ee0e
[FAILED] Timed out after 600.000s.
command timed out after 600.000000s: [C:\Users\Administrator\AppData\Local\cirrus-ci-build\repo\bin\windows\podman.exe machine rm --force ac9b6350ee0e]
Expected process to exit. It did not.
In [DeferCleanup (Each)] at: C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_test.go:59 @ 07/22/24 14:53:42.123
Full Stack Trace
github.com/containers/podman/v5/pkg/machine/e2e_test.(*machineSession).waitWithTimeout(0xc000120848, 0x8bb2c97000)
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_test.go:59 +0x146
github.com/containers/podman/v5/pkg/machine/e2e_test.runWrapper({0xc0005251d0, 0x50}, {0xc0015ecd40, 0x4, 0x4}, 0x8bb2c97000, 0x1)
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_test.go:213 +0x37a
github.com/containers/podman/v5/pkg/machine/e2e_test.(*machineTestBuilder).run(0xc0001fecb0?)
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_test.go:175 +0x33
github.com/containers/podman/v5/pkg/machine/e2e_test.(*initMachine).buildCmd.func1()
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:85 +0x8a
reflect.Value.call({0x7ff7e81e2320?, 0xc0001957c0?, 0x7ff7e8248ae0?}, {0x7ff7e83feefc, 0x4}, {0x7ff7e8f3dba0, 0x0, 0x7ff7e85f2a60?})
C:/Program Files/Go/src/reflect/value.go:596 +0xca6
reflect.Value.Call({0x7ff7e81e2320?, 0xc0001957c0?, 0x7ff7e77cdad2?}, {0x7ff7e8f3dba0?, 0x0?, 0x0?})
C:/Program Files/Go/src/reflect/value.go:380 +0xb9
< Exit [DeferCleanup (Each)] podman machine start - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:53:42.123 (10m1.003s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:53:42.123
[FAILED] failed to remove test dir: "remove C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test2215193062\\.config\\containers\\podman\\machine\\hyperv\\ac9b6350ee0e.lock: The process cannot access the file because it is being used by another process."
In [DeferCleanup (Each)] at: C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:167 @ 07/22/24 14:53:42.129
Full Stack Trace
github.com/containers/podman/v5/pkg/machine/e2e_test.teardown({0x0, 0x0}, {0xc0003ad500?, 0x0?})
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:167 +0x71
github.com/containers/podman/v5/pkg/machine/e2e_test.init.func11.1()
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:188 +0x2f
reflect.Value.call({0x7ff7e81e2320?, 0x7ff7e8499fb0?, 0x7ff7e8248ae0?}, {0x7ff7e83feefc, 0x4}, {0x7ff7e8f3dba0, 0x0, 0x7ff7e85f2a60?})
C:/Program Files/Go/src/reflect/value.go:596 +0xca6
reflect.Value.Call({0x7ff7e81e2320?, 0x7ff7e8499fb0?, 0x7ff7e77cdad2?}, {0x7ff7e8f3dba0?, 0x0?, 0x0?})
C:/Program Files/Go/src/reflect/value.go:380 +0xb9
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:53:42.129 (6ms)
+ [FAILED] [1241.674 seconds]
podman machine start
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:16
[It] start only starts specified machine
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:133
podman machine start
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:16
start two machines in parallel
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:166
→ Enter [
It] start two machines in parallel - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:166 @ 07/22/24 14:53:42.129
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx m1-e8521b25a04a
Machine init complete
To start your machine run:
podman machine start m1-e8521b25a04a
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx m2-5a1d1793986b
Machine init complete
To start your machine run:
podman machine start m2-5a1d1793986b
C>
podman.exe machine start m2-5a1d1793986b
C>
podman.exe machine start m1-e8521b25a04a
Starting machine "m2-5a1d1793986b"
Starting machine "m1-e8521b25a04a"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful m2-5a1d1793986b
API forwarding listening on: npipe:////./pipe/podman-m2-5a1d1793986b
Another process was listening on the default Docker API socket address.
You can still connect Docker API clients by setting DOCKER_HOST using the
following command in your terminal session:
$Env:DOCKER_HOST="npipe:////./pipe/podman-m2-5a1d1793986b"
Machine "m2-5a1d1793986b" started successfully
Error: unable to start "m1-e8521b25a04a": machine m2-5a1d1793986b: VM already running or starting
← Exit [It] start two machines in parallel - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:166 @ 07/22/24 14:54:44.517 (1m2.388s)
> Enter [DeferCleanup (Each)] podman machine start - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:54:44.517
C>
podman.exe machine rm --force m2-5a1d1793986b
Error: unable to clean up gvproxy: remove C:\Users\ADMINI~1\AppData\Local\Temp\podman\gvproxy.pid: The process cannot access the file because it is being used by another process.
[FAILED] Expected
<int>: 125
to match exit code:
<int>: 0
In [DeferCleanup (Each)] at: C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:94 @ 07/22/24 14:54:46.43
Full Stack Trace
github.com/containers/podman/v5/pkg/machine/e2e_test.(*initMachine).buildCmd.func1()
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:94 +0x1ae
reflect.Value.call({0x7ff7e81e2320?, 0xc000116a60?, 0x7ff7e8248ae0?}, {0x7ff7e83feefc, 0x4}, {0x7ff7e8f3dba0, 0x0, 0x7ff7e85f2a60?})
C:/Program Files/Go/src/reflect/value.go:596 +0xca6
reflect.Value.Call({0x7ff7e81e2320?, 0xc000116a60?, 0x7ff7e77cdad2?}, {0x7ff7e8f3dba0?, 0x0?, 0x0?})
C:/Program Files/Go/src/reflect/value.go:380 +0xb9
< Exit [DeferCleanup (Each)] podman machine start - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:54:46.43 (1.913s)
> Enter [DeferCleanup (Each)] podman machine start - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:54:46.43
C>
podman.exe machine rm --force m1-e8521b25a04a
< Exit [DeferCleanup (Each)] podman machine start - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:54:47.767 (1.337s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:54:47.767
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:54:47.772 (5ms)
+ [FAILED] [65.643 seconds]
podman machine start [DeferCleanup (Each)]
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83
start two machines in parallel
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:166
podman machine proxy settings propagation
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/proxy_test.go:13
ssh to running machine and check proxy settings
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/proxy_test.go:15
→ Enter [
It] ssh to running machine and check proxy settings - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/proxy_test.go:15 @ 07/22/24 14:54:47.773
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 34630d93694a
Machine init complete
To start your machine run:
podman machine start 34630d93694a
C>
podman.exe machine start 34630d93694a
Starting machine "34630d93694a"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful 34630d93694a
API forwarding listening on: npipe:////./pipe/podman-34630d93694a
Another process was listening on the default Docker API socket address.
You can still connect Docker API clients by setting DOCKER_HOST using the
following command in your terminal session:
$Env:DOCKER_HOST="npipe:////./pipe/podman-34630d93694a"
Machine "34630d93694a" started successfully
C>
podman.exe machine ssh 34630d93694a printenv HTTP_PROXY
http://abcdefghijklmnopqrstuvwxyz-proxy
C>
podman.exe machine ssh 34630d93694a printenv HTTPS_PROXY
http://abcdefghijklmnopqrstuvwxyz-proxy
C>
podman.exe machine ssh 34630d93694a printenv SSL_CERT_DIR SSL_CERT_FILE
/etc/containers/certs.d
/etc/containers/certs.d/cert1
C>
podman.exe machine ssh 34630d93694a cat $SSL_CERT_DIR/cert2 $SSL_CERT_FILE
cert2 content
cert1 content
C>
podman.exe machine stop 34630d93694a
Error: unable to clean up gvproxy: remove C:\Users\ADMINI~1\AppData\Local\Temp\podman\gvproxy.pid: The process cannot access the file because it is being used by another process.
[FAILED] Expected
<int>: 125
to match exit code:
<int>: 0
In [It] at: C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/proxy_test.go:76 @ 07/22/24 14:55:42.521
Full Stack Trace
github.com/containers/podman/v5/pkg/machine/e2e_test.init.func12.1()
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/proxy_test.go:76 +0x1007
← Exit [It] ssh to running machine and check proxy settings - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/proxy_test.go:15 @ 07/22/24 14:55:42.521 (54.748s)
> Enter [DeferCleanup (Each)] podman machine proxy settings propagation - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:55:42.521
C>
podman.exe machine rm --force 34630d93694a
< Exit [DeferCleanup (Each)] podman machine proxy settings propagation - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:55:43.833 (1.312s)
> Enter [DeferCleanup (Each)] podman machine proxy settings propagation - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/vendor/github.com/onsi/ginkgo/v2/internal/testingtproxy/testing_t_proxy.go:153 @ 07/22/24 14:55:43.833
< Exit [DeferCleanup (Each)] podman machine proxy settings propagation - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/vendor/github.com/onsi/ginkgo/v2/internal/testingtproxy/testing_t_proxy.go:153 @ 07/22/24 14:55:43.833 (0s)
> Enter [DeferCleanup (Each)] podman machine proxy settings propagation - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/vendor/github.com/onsi/ginkgo/v2/internal/testingtproxy/testing_t_proxy.go:153 @ 07/22/24 14:55:43.833
< Exit [DeferCleanup (Each)] podman machine proxy settings propagation - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/vendor/github.com/onsi/ginkgo/v2/internal/testingtproxy/testing_t_proxy.go:153 @ 07/22/24 14:55:43.834 (1ms)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:55:43.834
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:55:43.839 (5ms)
+ [FAILED] [56.067 seconds]
podman machine proxy settings propagation
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/proxy_test.go:13
[It] ssh to running machine and check proxy settings
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/proxy_test.go:15
podman machine info
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/info_test.go:13
machine info
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/info_test.go:15
→ Enter [
It] machine info - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/info_test.go:15 @ 07/22/24 14:55:43.839
C>
podman.exe machine info
host:
arch: amd64
currentmachine: ""
defaultmachine: ""
eventsdir: C:\Users\ADMINI~1\AppData\Local\Temp\podman_test2464577924\.local\share\containers\podman\podman
machineconfigdir: C:\Users\ADMINI~1\AppData\Local\Temp\podman_test2464577924\.config\containers\podman\machine\hyperv
machineimagedir: C:\Users\ADMINI~1\AppData\Local\Temp\podman_test2464577924\.local\share\containers\podman\machine\hyperv
machinestate: ""
numberofmachines: 0
os: windows
vmtype: hyperv
version:
apiversion: 5.2.0-dev
version: 5.2.0-dev
goversion: go1.22.4
gitcommit: a05a9cae0756b1ebcb1f29726a172b0ac0f43356
builttime: Mon Jul 22 14:11:30 2024
built: 1721657490
osarch: windows/amd64
os: windows
C>
podman.exe machine info --format {{.Host.NumberOfMachines}}
0
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 989cc4b42e05
Machine init complete
To start your machine run:
podman machine start 989cc4b42e05
C>
podman.exe machine info --format {{.Host.NumberOfMachines}}
1
C>
podman.exe machine info --format json
{
"Host": {
"Arch": "amd64",
"CurrentMachine": "989cc4b42e05",
"DefaultMachine": "989cc4b42e05",
"EventsDir": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test2464577924\\.local\\share\\containers\\podman\\podman",
"MachineConfigDir": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test2464577924\\.config\\containers\\podman\\machine\\hyperv",
"MachineImageDir": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test2464577924\\.local\\share\\containers\\podman\\machine\\hyperv",
"MachineState": "Stopped",
"NumberOfMachines": 1,
"OS": "windows",
"VMType": "hyperv"
},
"Version": {
"APIVersion": "5.2.0-dev",
"Version": "5.2.0-dev",
"GoVersion": "go1.22.4",
"GitCommit": "a05a9cae0756b1ebcb1f29726a172b0ac0f43356",
"BuiltTime": "Mon Jul 22 14:11:30 2024",
"Built": 1721657490,
"OsArch": "windows/amd64",
"Os": "windows"
}
}
← Exit [It] machine info - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/info_test.go:15 @ 07/22/24 14:56:04.165 (20.325s)
> Enter [DeferCleanup (Each)] podman machine info - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:56:04.165
C>
podman.exe machine rm --force 989cc4b42e05
< Exit [DeferCleanup (Each)] podman machine info - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:56:05.515 (1.35s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:56:05.515
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:56:05.52 (5ms)
+ [21.681 seconds]
podman machine set
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:15
set machine cpus, disk, memory
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:17
→ Enter [
It] set machine cpus, disk, memory - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:17 @ 07/22/24 14:56:05.521
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 66f0f2646c68
Machine init complete
To start your machine run:
podman machine start 66f0f2646c68
C>
podman.exe machine set --memory 524288 66f0f2646c68
Error: requested amount of memory (524288 MB) greater than total system memory (205773746176 MB)
C>
podman.exe machine set --cpus 2 --disk-size 102 --memory 4096 66f0f2646c68
C>
podman.exe machine set --cpus 2 --disk-size 5 --memory 4096 66f0f2646c68
Error: new disk size must be larger than 102 GB
C>
podman.exe machine start 66f0f2646c68
Starting machine "66f0f2646c68"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful 66f0f2646c68
API forwarding listening on: npipe:////./pipe/podman-66f0f2646c68
Another process was listening on the default Docker API socket address.
You can still connect Docker API clients by setting DOCKER_HOST using the
following command in your terminal session:
$Env:DOCKER_HOST="npipe:////./pipe/podman-66f0f2646c68"
Machine "66f0f2646c68" started successfully
C>
podman.exe machine ssh 66f0f2646c68 lscpu | grep "CPU(s):" | head -1
CPU(s): 2
C>
podman.exe machine ssh 66f0f2646c68 sudo fdisk -l | grep Disk
Disk /dev/sda: 102 GiB, 109521666048 bytes, 213909504 sectors
Disk model: Virtual Disk
Disklabel type: gpt
Disk identifier: 3562252A-F170-405A-A016-6A13F2F9674B
C>
podman.exe machine ssh 66f0f2646c68 cat /proc/meminfo | grep -i 'memtotal' | grep -o '[[:digit:]]*'
4002240
C>
podman.exe machine set --cpus 4 --disk-size 5 --memory 4096 66f0f2646c68
Error: new disk size must be larger than 102 GB
← Exit [It] set machine cpus, disk, memory - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:17 @ 07/22/24 14:57:11.6 (1m6.079s)
> Enter [DeferCleanup (Each)] podman machine set - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:57:11.6
C>
podman.exe machine rm --force 66f0f2646c68
< Exit [DeferCleanup (Each)] podman machine set - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:57:14.093 (2.493s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:57:14.093
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:57:14.099 (5ms)
+ [68.578 seconds]
podman machine set
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:15
wsl cannot change disk, memory, processor
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:72
→ Enter [
It] wsl cannot change disk, memory, processor - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:72 @ 07/22/24 14:57:14.1
[SKIPPED] tests are only for WSL provider
In [It] at: C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_test.go:260 @ 07/22/24 14:57:14.1
Full Stack Trace
github.com/containers/podman/v5/pkg/machine/e2e_test.skipIfNotVmtype(0x1, {0x7ff7e84293e6, 0x1f})
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_test.go:260 +0x5b
github.com/containers/podman/v5/pkg/machine/e2e_test.init.func15.2()
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:73 +0x30
← Exit [It] wsl cannot change disk, memory, processor - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:72 @ 07/22/24 14:57:14.1 (0s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:57:14.1
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:57:14.1 (1ms)
S [SKIPPED] [0.002 seconds]
podman machine set
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:15
[It] wsl cannot change disk, memory, processor
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:72
podman machine set
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:15
no settings should change if no flags
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:97
→ Enter [
It] no settings should change if no flags - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:97 @ 07/22/24 14:57:14.101
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 088415885a25
Machine init complete
To start your machine run:
podman machine start 088415885a25
C>
podman.exe machine set 088415885a25
C>
podman.exe machine start 088415885a25
Starting machine "088415885a25"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful 088415885a25
API forwarding listening on: npipe:////./pipe/podman-088415885a25
Another process was listening on the default Docker API socket address.
You can still connect Docker API clients by setting DOCKER_HOST using the
following command in your terminal session:
$Env:DOCKER_HOST="npipe:////./pipe/podman-088415885a25"
Machine "088415885a25" started successfully
C>
podman.exe machine ssh 088415885a25 lscpu | grep "CPU(s):" | head -1
CPU(s): 24
C>
podman.exe machine ssh 088415885a25 sudo fdisk -l | grep Disk
Disk /dev/sda: 11 GiB, 11811160064 bytes, 23068672 sectors
Disk model: Virtual Disk
Disklabel type: gpt
Disk identifier: DB374B70-9E4D-42D6-A305-C9134B0AB467
← Exit [It] no settings should change if no flags - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:97 @ 07/22/24 14:58:01.54 (47.439s)
> Enter [DeferCleanup (Each)] podman machine set - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:58:01.54
C>
podman.exe machine rm --force 088415885a25
< Exit [DeferCleanup (Each)] podman machine set - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:58:04.336 (2.796s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:58:04.336
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:58:04.341 (5ms)
+ [50.240 seconds]
podman machine set
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:15
set rootful with docker sock change
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:132
→ Enter [
It] set rootful with docker sock change - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:132 @ 07/22/24 14:58:04.341
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 472a9c237129
Machine init complete
To start your machine run:
podman machine start 472a9c237129
C>
podman.exe machine set --rootful 472a9c237129
C>
podman.exe machine start 472a9c237129
Starting machine "472a9c237129"
API forwarding listening on: npipe:////./pipe/podman-472a9c237129
Another process was listening on the default Docker API socket address.
You can still connect Docker API clients by setting DOCKER_HOST using the
following command in your terminal session:
$Env:DOCKER_HOST="npipe:////./pipe/podman-472a9c237129"
Machine "472a9c237129" started successfully
C>
podman.exe machine inspect --format {{.Rootful}} 472a9c237129
true
C>
podman.exe machine ssh 472a9c237129 readlink /var/run/docker.sock
/run/podman/podman.sock
← Exit [It] set rootful with docker sock change - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:132 @ 07/22/24 14:58:49.73 (45.389s)
> Enter [DeferCleanup (Each)] podman machine set - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:58:49.73
C>
podman.exe machine rm --force 472a9c237129
< Exit [DeferCleanup (Each)] podman machine set - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:58:52.414 (2.684s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:58:52.414
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:58:52.419 (5ms)
+ [48.078 seconds]
podman machine set
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:15
set while machine already running
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:190
→ Enter [
It] set while machine already running - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:190 @ 07/22/24 14:58:52.422
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 70b4d3259aa2
Machine init complete
To start your machine run:
podman machine start 70b4d3259aa2
C>
podman.exe machine start 70b4d3259aa2
Starting machine "70b4d3259aa2"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful 70b4d3259aa2
API forwarding listening on: npipe:////./pipe/podman-70b4d3259aa2
Another process was listening on the default Docker API socket address.
You can still connect Docker API clients by setting DOCKER_HOST using the
following command in your terminal session:
$Env:DOCKER_HOST="npipe:////./pipe/podman-70b4d3259aa2"
Machine "70b4d3259aa2" started successfully
C>
podman.exe machine set --rootful 70b4d3259aa2
Error: unable to change settings unless vm is stopped
← Exit [It] set while machine already running - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:190 @ 07/22/24 14:59:36.776 (44.354s)
> Enter [DeferCleanup (Each)] podman machine set - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:59:36.776
C>
podman.exe machine rm --force 70b4d3259aa2
< Exit [DeferCleanup (Each)] podman machine set - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:59:39.45 (2.674s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:59:39.45
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:59:39.455 (5ms)
+ [47.034 seconds]
podman machine init - windows only
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_windows_test.go:17
init should not should not overwrite existing HyperV vms
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_windows_test.go:49
→ Enter [
It] init should not should not overwrite existing HyperV vms - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_windows_test.go:49 @ 07/22/24 14:59:39.457
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 6e7eccafd982
Error: vm "6e7eccafd982" already exists on hypervisor
← Exit [It] init should not should not overwrite existing HyperV vms - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_windows_test.go:49 @ 07/22/24 14:59:40.942 (1.485s)
> Enter [DeferCleanup (Each)] podman machine init - windows only - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:59:40.942
C>
podman.exe machine rm --force 6e7eccafd982
Error: 6e7eccafd982: VM does not exist
< Exit [DeferCleanup (Each)] podman machine init - windows only - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 14:59:41.057 (115ms)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:59:41.057
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:59:41.061 (4ms)
+ [1.604 seconds]
podman machine stop
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/stop_test.go:12
stop bad name
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/stop_test.go:14
→ Enter [
It] stop bad name - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/stop_test.go:14 @ 07/22/24 14:59:41.063
C>
podman.exe machine stop abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
Error: abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ: VM does not exist
← Exit [It] stop bad name - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/stop_test.go:14 @ 07/22/24 14:59:41.178 (115ms)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:59:41.178
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 14:59:41.182 (4ms)
+ [0.119 seconds]
podman machine stop
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/stop_test.go:12
Stop running machine
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/stop_test.go:22
→ Enter [
It] Stop running machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/stop_test.go:22 @ 07/22/24 14:59:41.183
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx --now 8403ae0d804f
Machine init complete
Starting machine "8403ae0d804f"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful 8403ae0d804f
API forwarding listening on: npipe:////./pipe/podman-8403ae0d804f
Another process was listening on the default Docker API socket address.
You can still connect Docker API clients by setting DOCKER_HOST using the
following command in your terminal session:
$Env:DOCKER_HOST="npipe:////./pipe/podman-8403ae0d804f"
Machine "8403ae0d804f" started successfully
C>
podman.exe machine stop 8403ae0d804f
Machine "8403ae0d804f" stopped successfully
C>
podman.exe machine stop 8403ae0d804f
Machine "8403ae0d804f" stopped successfully
C>
podman.exe machine inspect --format {{.LastUp.Format "2006-01-02T15:04:05Z07:00"}} 8403ae0d804f
2024-07-22T15:00:25Z
← Exit [It] Stop running machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/stop_test.go:22 @ 07/22/24 15:00:25.795 (44.612s)
> Enter [DeferCleanup (Each)] podman machine stop - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 15:00:25.795
C>
podman.exe machine rm --force 8403ae0d804f
< Exit [DeferCleanup (Each)] podman machine stop - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 15:00:27.137 (1.342s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 15:00:27.137
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 15:00:27.142 (5ms)
+ [45.960 seconds]
run basic podman commands
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/basic_test.go:20
Basic ops
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/basic_test.go:22
→ Enter [
It] Basic ops - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/basic_test.go:22 @ 07/22/24 15:00:27.143
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx --now f3031d45f814
Machine init complete
Starting machine "f3031d45f814"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful f3031d45f814
API forwarding listening on: npipe:////./pipe/podman-f3031d45f814
Another process was listening on the default Docker API socket address.
You can still connect Docker API clients by setting DOCKER_HOST using the
following command in your terminal session:
$Env:DOCKER_HOST="npipe:////./pipe/podman-f3031d45f814"
Machine "f3031d45f814" started successfully
C>
podman.exe -r images -q
C>
podman.exe -r pull quay.io/libpod/alpine_nginx
Trying to pull quay.io/libpod/alpine_nginx:latest...
Getting image source signatures
Copying blob sha256:d2c7362ca710ad35a846a34571a7c3450ea3cce04efcbcb4d3af276eda154ade
Copying blob sha256:71895e83ea49901b7b752bbf3ca19a54148a5f4ab5fdff3dca9bcd59d44c59e3
Copying blob sha256:df9b9388f04ad6279a7410b85cedfdcb2208c0a003da7ab5613af71079148139
Copying config sha256:ecea49d99daa5bd62ebaef1338f6bc4c948bf2651b139160404f9c1c48fcd85c
Writing manifest to image destination
ecea49d99daa5bd62ebaef1338f6bc4c948bf2651b139160404f9c1c48fcd85c
C>
podman.exe -r run quay.io/libpod/alpine_nginx cat /etc/os-release
NAME="Alpine Linux"
ID=alpine
VERSION_ID=3.15.4
PRETTY_NAME="Alpine Linux v3.15"
HOME_URL="https://alpinelinux.org/"
BUG_REPORT_URL="https://bugs.alpinelinux.org/"
C>
podman.exe -r build C:\Users\ADMINI~1\AppData\Local\Temp\ginkgo125548655
STEP 1/2: FROM quay.io/libpod/alpine_nginx
STEP 2/2: RUN ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: vsock0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 65520 qdisc fq_codel state UNKNOWN qlen 1000
link/ether 02:46:87:39:bc:c0 brd ff:ff:ff:ff:ff:ff
inet 192.168.127.2/24 brd 192.168.127.255 scope global noprefixroute vsock0
valid_lft forever preferred_lft forever
inet6 fe80::46:87ff:fe39:bcc0/64 scope link tentative
valid_lft forever preferred_lft forever
COMMIT
time=
"2024-07-22T15:01:15Z" level=
warning msg=
"HEALTHCHECK is not supported for OCI image format and will be ignored. Must use `docker` format"
--> c10a3e6eb9e5
c10a3e6eb9e50f1980c5c606ecd82e926fcef5aad72d3fdc8dd10188e516f556
C>
podman.exe -r rm -a
7d1fb4425a8d365d121cc313c4dc8e355abb0f4af71e97be7a8ed8b0d5f9fffa
← Exit [It] Basic ops - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/basic_test.go:22 @ 07/22/24 15:01:15.766 (48.623s)
> Enter [DeferCleanup (Each)] run basic podman commands - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/vendor/github.com/onsi/ginkgo/v2/internal/testingtproxy/testing_t_proxy.go:153 @ 07/22/24 15:01:15.766
< Exit [DeferCleanup (Each)] run basic podman commands - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/vendor/github.com/onsi/ginkgo/v2/internal/testingtproxy/testing_t_proxy.go:153 @ 07/22/24 15:01:15.766 (1ms)
> Enter [DeferCleanup (Each)] run basic podman commands - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 15:01:15.766
C>
podman.exe machine rm --force f3031d45f814
< Exit [DeferCleanup (Each)] run basic podman commands - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 15:01:18.457 (2.691s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 15:01:18.457
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 15:01:18.462 (5ms)
+ [51.320 seconds]
run basic podman commands
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/basic_test.go:20
Volume should be disabled by command line
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/basic_test.go:120
→ Enter [
It] Volume should be disabled by command line - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/basic_test.go:120 @ 07/22/24 15:01:18.466
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx --volume --now 0b41267775d4
Machine init complete
Starting machine "0b41267775d4"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful 0b41267775d4
API forwarding listening on: npipe:////./pipe/podman-0b41267775d4
Another process was listening on the default Docker API socket address.
You can still connect Docker API clients by setting DOCKER_HOST using the
following command in your terminal session:
$Env:DOCKER_HOST="npipe:////./pipe/podman-0b41267775d4"
Machine "0b41267775d4" started successfully
C>
podman.exe machine ssh 0b41267775d4 findmnt -no FSTYPE -t 9p
C>
podman.exe machine ssh 0b41267775d4 findmnt -no FSTYPE -t virtiofs
← Exit [It] Volume should be disabled by command line - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/basic_test.go:120 @ 07/22/24 15:02:07.793 (49.327s)
> Enter [DeferCleanup (Each)] run basic podman commands - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 15:02:07.793
C>
podman.exe machine rm --force 0b41267775d4
< Exit [DeferCleanup (Each)] run basic podman commands - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 15:02:10.629 (2.836s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 15:02:10.629
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 15:02:10.634 (5ms)
+ [52.169 seconds]
run basic podman commands
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/basic_test.go:20
Podman ops with port forwarding and gvproxy
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/basic_test.go:147
→ Enter [
It] Podman ops with port forwarding and gvproxy - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/basic_test.go:147 @ 07/22/24 15:02:10.634
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx --now 09f0e652ca79
Machine init complete
Starting machine "09f0e652ca79"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful 09f0e652ca79
API forwarding listening on: npipe:////./pipe/podman-09f0e652ca79
Another process was listening on the default Docker API socket address.
You can still connect Docker API clients by setting DOCKER_HOST using the
following command in your terminal session:
$Env:DOCKER_HOST="npipe:////./pipe/podman-09f0e652ca79"
Machine "09f0e652ca79" started successfully
C>
podman.exe -r run -dt --name test -p 62544:80 quay.io/libpod/alpine_nginx
Trying to pull quay.io/libpod/alpine_nginx:latest...
Getting image source signatures
Copying blob sha256:d2c7362ca710ad35a846a34571a7c3450ea3cce04efcbcb4d3af276eda154ade
Copying blob sha256:df9b9388f04ad6279a7410b85cedfdcb2208c0a003da7ab5613af71079148139
Copying blob sha256:71895e83ea49901b7b752bbf3ca19a54148a5f4ab5fdff3dca9bcd59d44c59e3
Copying config sha256:ecea49d99daa5bd62ebaef1338f6bc4c948bf2651b139160404f9c1c48fcd85c
Writing manifest to image destination
39851788667e296c1069f4a576c96b59bf80a9561cdbe88265e7f278465cd4eb
C>
podman.exe -r exec test true
C>
podman.exe -r rm -af
39851788667e296c1069f4a576c96b59bf80a9561cdbe88265e7f278465cd4eb
C>
podman.exe machine stop 09f0e652ca79
Machine "09f0e652ca79" stopped successfully
← Exit [It] Podman ops with port forwarding and gvproxy - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/basic_test.go:147 @ 07/22/24 15:02:58.147 (47.513s)
> Enter [DeferCleanup (Each)] run basic podman commands - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 15:02:58.147
C>
podman.exe machine rm --force 09f0e652ca79
< Exit [DeferCleanup (Each)] run basic podman commands - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 15:02:59.422 (1.275s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 15:02:59.422
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 15:02:59.427 (5ms)
+ [48.793 seconds]
run basic podman commands
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/basic_test.go:20
podman volume on non-standard path
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/basic_test.go:185
→ Enter [
It] podman volume on non-standard path - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/basic_test.go:185 @ 07/22/24 15:02:59.428
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx --volume C:\Users\ADMINI~1\AppData\Local\Temp\machine-volume710816629:/does/not/exist --now 813f31716338
Machine init complete
Starting machine "813f31716338"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful 813f31716338
API forwarding listening on: npipe:////./pipe/podman-813f31716338
Another process was listening on the default Docker API socket address.
You can still connect Docker API clients by setting DOCKER_HOST using the
following command in your terminal session:
$Env:DOCKER_HOST="npipe:////./pipe/podman-813f31716338"
Machine "813f31716338" started successfully
C>
podman.exe machine ssh 813f31716338 cat /does/not/exist/testfile
abcdefg1234567 < Exit [It] podman volume on non-standard path - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/basic_test.go:185 @ 07/22/24 15:03:44.21 (44.782s)
> Enter [DeferCleanup (Each)] run basic podman commands - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 15:03:44.21
C>
podman.exe machine rm --force 813f31716338
< Exit [DeferCleanup (Each)] run basic podman commands - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 15:03:46.894 (2.684s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 15:03:46.894
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 15:03:46.9 (6ms)
+ [47.472 seconds]
podman machine list
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/list_test.go:16
list machine
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/list_test.go:18
→ Enter [
It] list machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/list_test.go:18 @ 07/22/24 15:03:46.9
C>
podman.exe machine list
NAME VM TYPE CREATED LAST UP CPUS MEMORY DISK SIZE
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx eb88947bc20e
Machine init complete
To start your machine run:
podman machine start eb88947bc20e
C>
podman.exe machine list
NAME VM TYPE CREATED LAST UP CPUS MEMORY DISK SIZE
eb88947bc20e* hyperv 19 seconds ago Never 24 2GiB 11GiB
← Exit [It] list machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/list_test.go:18 @ 07/22/24 15:04:06.357 (19.457s)
> Enter [DeferCleanup (Each)] podman machine list - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 15:04:06.357
C>
podman.exe machine rm --force eb88947bc20e
< Exit [DeferCleanup (Each)] podman machine list - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 15:04:07.553 (1.195s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 15:04:07.553
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 15:04:07.557 (4ms)
+ [20.657 seconds]
podman machine list
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/list_test.go:16
list machines with quiet or noheading
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/list_test.go:36
→ Enter [
It] list machines with quiet or noheading - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/list_test.go:36 @ 07/22/24 15:04:07.558
C>
podman.exe machine list --quiet
C>
podman.exe machine list --noheading --quiet
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 927c97a9ade1
Machine init complete
To start your machine run:
podman machine start 927c97a9ade1
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx aeeccad1d1a1
Machine init complete
To start your machine run:
podman machine start aeeccad1d1a1
C>
podman.exe machine list --noheading --quiet
927c97a9ade1*
aeeccad1d1a1
← Exit [It] list machines with quiet or noheading - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/list_test.go:36 @ 07/22/24 15:04:45.344 (37.786s)
> Enter [DeferCleanup (Each)] podman machine list - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 15:04:45.344
C>
podman.exe machine rm --force aeeccad1d1a1
< Exit [DeferCleanup (Each)] podman machine list - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 15:04:46.526 (1.182s)
> Enter [DeferCleanup (Each)] podman machine list - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 15:04:46.526
C>
podman.exe machine rm --force 927c97a9ade1
< Exit [DeferCleanup (Each)] podman machine list - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 15:04:47.696 (1.17s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 15:04:47.696
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 15:04:47.701 (5ms)
+ [40.144 seconds]
podman machine list
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/list_test.go:16
list machine: check if running while starting
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/list_test.go:72
→ Enter [
It] list machine: check if running while starting - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/list_test.go:72 @ 07/22/24 15:04:47.702
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx f82b98aba420
Machine init complete
To start your machine run:
podman machine start f82b98aba420
C>
podman.exe machine list --format {{.LastUp}}
Never
C>
podman.exe machine start f82b98aba420
C>
podman.exe machine list --format {{.LastUp}}
Starting machine "f82b98aba420"
Never
C>
podman.exe machine list --format {{.LastUp}}
Currently starting
C>
podman.exe machine list --format {{.LastUp}}
Currently starting
C>
podman.exe machine list --format {{.LastUp}}
Currently starting
C>
podman.exe machine list --format {{.LastUp}}
Currently starting
C>
podman.exe machine list --format {{.LastUp}}
Currently starting
C>
podman.exe machine list --format {{.LastUp}}
Currently starting
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful f82b98aba420
C>
podman.exe machine list --format {{.LastUp}}
Currently starting
API forwarding listening on: npipe:////./pipe/podman-f82b98aba420
Another process was listening on the default Docker API socket address.
You can still connect Docker API clients by setting DOCKER_HOST using the
following command in your terminal session:
$Env:DOCKER_HOST="npipe:////./pipe/podman-f82b98aba420"
Machine "f82b98aba420" started successfully
C>
podman.exe machine list --format {{.LastUp}}
Currently running
C>
podman.exe machine list --format {{.LastUp}}
Currently running
← Exit [It] list machine: check if running while starting - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/list_test.go:72 @ 07/22/24 15:05:33.658 (45.956s)
> Enter [DeferCleanup (Each)] podman machine list - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 15:05:33.658
C>
podman.exe machine rm --force f82b98aba420
< Exit [DeferCleanup (Each)] podman machine list - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 15:05:36.522 (2.864s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 15:05:36.522
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 15:05:36.527 (5ms)
+ [48.826 seconds]
podman machine list
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/list_test.go:16
list with --format
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/list_test.go:111
→ Enter [
It] list with --format - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/list_test.go:111 @ 07/22/24 15:05:36.528
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 26889d0e955e
Machine init complete
To start your machine run:
podman machine start 26889d0e955e
C>
podman.exe machine list --format {{.Name}}
26889d0e955e*
C>
podman.exe machine list --format json
[
{
"Name": "26889d0e955e",
"Default": true,
"Created": "2024-07-22T15:05:36.687878Z",
"Running": false,
"Starting": false,
"LastUp": "0001-01-01T00:00:00Z",
"Stream": "default",
"VMType": "hyperv",
"CPUs": 24,
"Memory": "2147483648",
"DiskSize": "11811160064",
"Port": 50511,
"RemoteUsername": "core",
"IdentityPath": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test417860812\\.local\\share\\containers\\podman\\machine\\machine",
"UserModeNetworking": true
}
]C:\Users\Administrator\AppData\Local\cirrus-ci-build\repo\bin\windows\podman.exe machine list --format table {{.Name}}
NAME
26889d0e955e*
← Exit [It] list with --format - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/list_test.go:111 @ 07/22/24 15:05:55.944 (19.416s)
> Enter [DeferCleanup (Each)] podman machine list - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 15:05:55.944
C>
podman.exe machine rm --force 26889d0e955e
< Exit [DeferCleanup (Each)] podman machine list - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 15:05:57.146 (1.202s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 15:05:57.146
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 15:05:57.151 (5ms)
+ [20.624 seconds]
podman machine list
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/list_test.go:16
list machine in machine-readable byte format
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/list_test.go:151
→ Enter [
It] list machine in machine-readable byte format - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/list_test.go:151 @ 07/22/24 15:05:57.152
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 385ef40ad0fb
Machine init complete
To start your machine run:
podman machine start 385ef40ad0fb
C>
podman.exe machine list --format json
[
{
"Name": "385ef40ad0fb",
"Default": true,
"Created": "2024-07-22T15:05:57.3048326Z",
"Running": false,
"Starting": false,
"LastUp": "0001-01-01T00:00:00Z",
"Stream": "default",
"VMType": "hyperv",
"CPUs": 24,
"Memory": "2147483648",
"DiskSize": "11811160064",
"Port": 50517,
"RemoteUsername": "core",
"IdentityPath": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test4199298429\\.local\\share\\containers\\podman\\machine\\machine",
"UserModeNetworking": true
}
] < Exit [It] list machine in machine-readable byte format - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/list_test.go:151 @ 07/22/24 15:06:15.741 (18.588s)
> Enter [DeferCleanup (Each)] podman machine list - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 15:06:15.741
C>
podman.exe machine rm --force 385ef40ad0fb
< Exit [DeferCleanup (Each)] podman machine list - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 15:06:16.925 (1.185s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 15:06:16.925
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 15:06:16.93 (5ms)
+ [19.779 seconds]
podman machine list
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/list_test.go:16
list machine in human-readable format
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/list_test.go:173
→ Enter [
It] list machine in human-readable format - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/list_test.go:173 @ 07/22/24 15:06:16.931
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 5224a01a820b
Machine init complete
To start your machine run:
podman machine start 5224a01a820b
C>
podman.exe machine list --format {{.Memory}} {{.DiskSize}}
2GiB 11GiB
← Exit [It] list machine in human-readable format - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/list_test.go:173 @ 07/22/24 15:06:36.116 (19.185s)
> Enter [DeferCleanup (Each)] podman machine list - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 15:06:36.116
C>
podman.exe machine rm --force 5224a01a820b
< Exit [DeferCleanup (Each)] podman machine list - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 15:06:37.288 (1.172s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 15:06:37.289
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 15:06:37.293 (5ms)
+ [20.363 seconds]
podman machine ssh
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/ssh_test.go:10
ssh to non-running machine
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/ssh_test.go:21
→ Enter [
It] ssh to non-running machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/ssh_test.go:21 @ 07/22/24 15:06:37.422
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 9e3be0635ce9
Machine init complete
To start your machine run:
podman machine start 9e3be0635ce9
C>
podman.exe machine ssh 9e3be0635ce9
Error: vm "9e3be0635ce9" is not running
← Exit [It] ssh to non-running machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/ssh_test.go:21 @ 07/22/24 15:06:56.324 (18.901s)
> Enter [DeferCleanup (Each)] podman machine ssh - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 15:06:56.324
C>
podman.exe machine rm --force 9e3be0635ce9
< Exit [DeferCleanup (Each)] podman machine ssh - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 15:06:57.522 (1.198s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 15:06:57.522
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 15:06:57.526 (4ms)
+ [20.104 seconds]
podman machine ssh
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/ssh_test.go:10
ssh to running machine and check os-type
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/ssh_test.go:35
→ Enter [
It] ssh to running machine and check os-type - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/ssh_test.go:35 @ 07/22/24 15:06:57.527
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx --now b5c11e3f5338
Machine init complete
Starting machine "b5c11e3f5338"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful b5c11e3f5338
API forwarding listening on: npipe:////./pipe/podman-b5c11e3f5338
Another process was listening on the default Docker API socket address.
You can still connect Docker API clients by setting DOCKER_HOST using the
following command in your terminal session:
$Env:DOCKER_HOST="npipe:////./pipe/podman-b5c11e3f5338"
Machine "b5c11e3f5338" started successfully
C>
podman.exe machine ssh b5c11e3f5338 cat /etc/os-release
NAME="Fedora Linux"
VERSION="40.20240519.2.0 (CoreOS)"
ID=fedora
VERSION_ID=40
VERSION_CODENAME=""
PLATFORM_ID="platform:f40"
PRETTY_NAME="Fedora CoreOS 40.20240519.2.0"
ANSI_COLOR="0;38;2;60;110;180"
LOGO=fedora-logo-icon
CPE_NAME="cpe:/o:fedoraproject:fedora:40"
HOME_URL="https://getfedora.org/coreos/"
DOCUMENTATION_URL="https://docs.fedoraproject.org/en-US/fedora-coreos/"
SUPPORT_URL="https://github.com/coreos/fedora-coreos-tracker/"
BUG_REPORT_URL="https://github.com/coreos/fedora-coreos-tracker/"
REDHAT_BUGZILLA_PRODUCT="Fedora"
REDHAT_BUGZILLA_PRODUCT_VERSION=40
REDHAT_SUPPORT_PRODUCT="Fedora"
REDHAT_SUPPORT_PRODUCT_VERSION=40
SUPPORT_END=2025-05-13
VARIANT="CoreOS"
VARIANT_ID=coreos
OSTREE_VERSION='40.20240519.2.0'
C>
podman.exe machine ssh b5c11e3f5338 false
← Exit [It] ssh to running machine and check os-type - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/ssh_test.go:35 @ 07/22/24 15:07:46.775 (49.248s)
> Enter [DeferCleanup (Each)] podman machine ssh - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 15:07:46.775
C>
podman.exe machine rm --force b5c11e3f5338
< Exit [DeferCleanup (Each)] podman machine ssh - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 15:07:49.655 (2.88s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 15:07:49.655
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 15:07:49.66 (5ms)
+ [52.134 seconds]
podman machine reset
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/reset_test.go:9
reset machine with one defined machine
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/reset_test.go:18
→ Enter [
It] reset machine with one defined machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/reset_test.go:18 @ 07/22/24 15:07:49.789
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx ed3bd60e2e2f
Machine init complete
To start your machine run:
podman machine start ed3bd60e2e2f
C>
podman.exe machine list --noheading
ed3bd60e2e2f* hyperv 18 seconds ago Never 24 2GiB 11GiB
C>
podman.exe machine reset --force
C>
podman.exe machine list --noheading
← Exit [It] reset machine with one defined machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/reset_test.go:18 @ 07/22/24 15:08:10.362 (20.573s)
> Enter [DeferCleanup (Each)] podman machine reset - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 15:08:10.362
C>
podman.exe machine rm --force ed3bd60e2e2f
Error: ed3bd60e2e2f: VM does not exist
< Exit [DeferCleanup (Each)] podman machine reset - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 15:08:10.477 (115ms)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 15:08:10.477
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 15:08:10.481 (4ms)
+ [20.692 seconds]
podman machine reset
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/reset_test.go:9
reset with running machine and other machines idle
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/reset_test.go:42
→ Enter [
It] reset with running machine and other machines idle - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/reset_test.go:42 @ 07/22/24 15:08:10.482
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx --now cc04686f2da6
Machine init complete
Starting machine "cc04686f2da6"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful cc04686f2da6
API forwarding listening on: npipe:////./pipe/podman-cc04686f2da6
Another process was listening on the default Docker API socket address.
You can still connect Docker API clients by setting DOCKER_HOST using the
following command in your terminal session:
$Env:DOCKER_HOST="npipe:////./pipe/podman-cc04686f2da6"
Machine "cc04686f2da6" started successfully
C>
podman.exe machine list --noheading
cc04686f2da6* hyperv 43 seconds ago Currently running 24 2GiB 11GiB
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx e88d8932d7da
Machine init complete
To start your machine run:
podman machine start e88d8932d7da
C>
podman.exe machine list --noheading
cc04686f2da6* hyperv About a minute ago Currently running 24 2GiB 11GiB
e88d8932d7da hyperv 18 seconds ago Never 24 2GiB 11GiB
C>
podman.exe machine reset --force
C>
podman.exe machine list --noheading
← Exit [It] reset with running machine and other machines idle - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/reset_test.go:42 @ 07/22/24 15:09:16.221 (1m5.739s)
> Enter [DeferCleanup (Each)] podman machine reset - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 15:09:16.221
C>
podman.exe machine rm --force e88d8932d7da
Error: e88d8932d7da: VM does not exist
< Exit [DeferCleanup (Each)] podman machine reset - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 15:09:16.337 (116ms)
> Enter [DeferCleanup (Each)] podman machine reset - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 15:09:16.337
C>
podman.exe machine rm --force cc04686f2da6
Error: cc04686f2da6: VM does not exist
< Exit [DeferCleanup (Each)] podman machine reset - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/22/24 15:09:16.461 (124ms)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 15:09:16.461
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/22/24 15:09:16.466 (5ms)
+ [65.985 seconds]
[SynchronizedAfterSuite]
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:96
→ Enter [
SynchronizedAfterSuite] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:96 @ 07/22/24 15:09:16.466
podman machine init machine init with volume 0.000000 seconds
podman machine init machine init with rosetta=false 0.000000 seconds
podman machine init machine init with rosetta=true 0.000000 seconds
podman machine init - windows only init with user mode networking 0.000550 seconds
podman machine init - windows only init should not overwrite existing WSL vms 0.000815 seconds
run basic podman commands Volume should be virtiofs 0.000999 seconds
podman machine set set user mode networking 0.001000 seconds
run basic podman commands Volume ops 0.001007 seconds
podman machine set wsl cannot change disk, memory, processor 0.001077 seconds
podman inspect stop inspect shows a unique socket name per machine 0.001632 seconds
podman machine stop stop bad name 0.115195 seconds
podman machine ssh bad machine name 0.124589 seconds
podman machine reset starting from scratch should not error 0.125838 seconds
podman machine start bad start name 0.129476 seconds
podman inspect stop inspect bad name 0.130326 seconds
podman machine rm bad init name 0.136595 seconds
podman machine init bad init 1.065500 seconds
podman machine init - windows only init should not should not overwrite existing HyperV vms 1.485297 seconds
podman machine list list machine in machine-readable byte format 18.589120 seconds
podman machine init simple init 18.621198 seconds
podman machine ssh ssh to non-running machine 18.901923 seconds
podman inspect stop inspect with go format 19.132847 seconds
podman machine list list machine in human-readable format 19.185770 seconds
podman machine init simple init with username 19.188204 seconds
podman machine list list with --format 19.417292 seconds
podman machine list list machine 19.457176 seconds
podman machine rm Removing all machines doesn't delete ssh keys 20.138386 seconds
podman machine info machine info 20.325831 seconds
podman machine rm machine rm --save-ignition --save-image 20.554819 seconds
podman machine reset reset machine with one defined machine 20.573372 seconds
podman machine init verify a podman 4 config does not break podman 5 22.240843 seconds
podman machine init init should cleanup on failure 25.279938 seconds
podman machine rm Remove machine 32.411619 seconds
podman inspect stop inspect two machines 37.069658 seconds
podman machine list list machines with quiet or noheading 37.786816 seconds
podman machine set set while machine already running 44.355154 seconds
podman machine stop Stop running machine 44.612730 seconds
podman machine start start machine already started 44.670371 seconds
run basic podman commands podman volume on non-standard path 44.782791 seconds
podman machine start start machine with conflict on SSH port 45.353912 seconds
podman machine set set rootful with docker sock change 45.388855 seconds
podman machine init machine init rootful with docker.sock check 45.396372 seconds
podman machine list list machine: check if running while starting 45.956813 seconds
podman machine init simple init with start 46.560526 seconds
podman machine set no settings should change if no flags 47.439171 seconds
run basic podman commands Podman ops with port forwarding and gvproxy 47.512869 seconds
run basic podman commands Basic ops 48.623805 seconds
podman machine init machine init rootless docker.sock check 48.794254 seconds
podman machine ssh ssh to running machine and check os-type 49.249259 seconds
run basic podman commands Volume should be disabled by command line 49.328149 seconds
podman machine rm Remove running machine 49.846738 seconds
podman machine proxy settings propagation ssh to running machine and check proxy settings 54.749129 seconds
podman machine start start two machines in parallel 62.387951 seconds
podman machine init machine init with cpus, disk size, memory, timezone 65.426643 seconds
podman machine reset reset with running machine and other machines idle 65.740216 seconds
podman machine set set machine cpus, disk, memory 66.079512 seconds
podman machine rm Remove machine sharing ssh key with another machine 66.920601 seconds
podman machine start start simple machine 84.370654 seconds
podman machine start start only starts specified machine 639.288832 seconds
← Exit [SynchronizedAfterSuite] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:96 @ 07/22/24 15:09:16.467 (1ms)
[SynchronizedAfterSuite] PASSED [0.001 seconds]
Processed Mon Jul 22 15:09:16 2024 by C:\Users\Administrator\AppData\Local\cirrus-ci-build\repo\contrib\cirrus\logformatter v0.3