podman machine start
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:16
start simple machine
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:18
→ Enter [
It] start simple machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:18 @ 07/31/24 21:53:07.391
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx cc93800a95b8
Machine init complete
To start your machine run:
podman machine start cc93800a95b8
C>
podman.exe machine start cc93800a95b8
Starting machine "cc93800a95b8"
[FAILED] Timed out after 600.001s.
command timed out after 600.000000s: [C:\Users\Administrator\AppData\Local\cirrus-ci-build\repo\bin\windows\podman.exe machine start cc93800a95b8]
Expected process to exit. It did not.
In [It] at: C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_test.go:59 @ 07/31/24 22:03:27.235
Full Stack Trace
github.com/containers/podman/v5/pkg/machine/e2e_test.(*machineSession).waitWithTimeout(0xc00021cb80, 0x8bb2c97000)
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_test.go:59 +0x146
github.com/containers/podman/v5/pkg/machine/e2e_test.runWrapper({0xc000764fa0, 0x50}, {0xc0007c2100, 0x3, 0x4}, 0x8bb2c97000, 0x1)
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_test.go:213 +0x37a
github.com/containers/podman/v5/pkg/machine/e2e_test.(*machineTestBuilder).run(0xc00014caf0?)
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_test.go:175 +0x33
github.com/containers/podman/v5/pkg/machine/e2e_test.init.func17.1()
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:24 +0x165
← Exit [It] start simple machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:18 @ 07/31/24 22:03:27.235 (10m19.794s)
> Enter [DeferCleanup (Each)] podman machine start - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:03:27.235
C>
podman.exe machine rm --force cc93800a95b8
[FAILED] Timed out after 600.000s.
command timed out after 600.000000s: [C:\Users\Administrator\AppData\Local\cirrus-ci-build\repo\bin\windows\podman.exe machine rm --force cc93800a95b8]
Expected process to exit. It did not.
In [DeferCleanup (Each)] at: C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_test.go:59 @ 07/31/24 22:13:28.213
Full Stack Trace
github.com/containers/podman/v5/pkg/machine/e2e_test.(*machineSession).waitWithTimeout(0xc00021cc80, 0x8bb2c97000)
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_test.go:59 +0x146
github.com/containers/podman/v5/pkg/machine/e2e_test.runWrapper({0xc000764fa0, 0x50}, {0xc0007c2600, 0x4, 0x4}, 0x8bb2c97000, 0x1)
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_test.go:213 +0x37a
github.com/containers/podman/v5/pkg/machine/e2e_test.(*machineTestBuilder).run(0xc00014caf0?)
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_test.go:175 +0x33
github.com/containers/podman/v5/pkg/machine/e2e_test.(*initMachine).buildCmd.func1()
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:85 +0x8a
reflect.Value.call({0x7ff7cc4c33c0?, 0xc000807520?, 0x0?}, {0x7ff7cc6e01fc, 0x4}, {0x7ff7cd21fc00, 0x0, 0x0?})
C:/Program Files/Go/src/reflect/value.go:596 +0xca6
reflect.Value.Call({0x7ff7cc4c33c0?, 0xc000807520?, 0xc000927f01?}, {0x7ff7cd21fc00?, 0xc000752088?, 0x7ff7cb72cc57?})
C:/Program Files/Go/src/reflect/value.go:380 +0xb9
< Exit [DeferCleanup (Each)] podman machine start - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:13:28.213 (10m1.002s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/31/24 22:13:28.213
[FAILED] failed to remove test dir: "remove C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test2570681655\\.config\\containers\\podman\\machine\\hyperv\\cc93800a95b8.lock: The process cannot access the file because it is being used by another process."
In [DeferCleanup (Each)] at: C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:167 @ 07/31/24 22:13:28.219
Full Stack Trace
github.com/containers/podman/v5/pkg/machine/e2e_test.teardown({0x0, 0x0}, {0xc00039abc0?, 0x0?})
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:167 +0x71
github.com/containers/podman/v5/pkg/machine/e2e_test.init.func11.1()
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:188 +0x2f
reflect.Value.call({0x7ff7cc4c33c0?, 0x7ff7cc77b2d8?, 0x7ff7cc529bc0?}, {0x7ff7cc6e01fc, 0x4}, {0x7ff7cd21fc00, 0x0, 0x7ff7cc8d3f20?})
C:/Program Files/Go/src/reflect/value.go:596 +0xca6
reflect.Value.Call({0x7ff7cc4c33c0?, 0x7ff7cc77b2d8?, 0x7ff7cbaaddd2?}, {0x7ff7cd21fc00?, 0x0?, 0x0?})
C:/Program Files/Go/src/reflect/value.go:380 +0xb9
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/31/24 22:13:28.219 (6ms)
+ [FAILED] [1220.802 seconds]
podman machine start
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:16
[It] start simple machine
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:18
podman machine start
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:16
start machine already started
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:63
→ Enter [
It] start machine already started - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:63 @ 07/31/24 22:13:28.35
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx c65af398cdc1
Machine init complete
To start your machine run:
podman machine start c65af398cdc1
C>
podman.exe machine start c65af398cdc1
Starting machine "c65af398cdc1"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful c65af398cdc1
API forwarding listening on: npipe:////./pipe/podman-c65af398cdc1
Another process was listening on the default Docker API socket address.
You can still connect Docker API clients by setting DOCKER_HOST using the
following command in your terminal session:
$Env:DOCKER_HOST="npipe:////./pipe/podman-c65af398cdc1"
Machine "c65af398cdc1" started successfully
C>
podman.exe machine inspect c65af398cdc1
[
{
"ConfigDir": {
"Path": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test1854029609\\.config\\containers\\podman\\machine\\hyperv"
},
"ConnectionInfo": {
"PodmanSocket": null,
"PodmanPipe": {
"Path": "\\\\.\\pipe\\podman-c65af398cdc1"
}
},
"Created": "2024-07-31T22:13:28.5160854Z",
"LastUp": "0001-01-01T00:00:00Z",
"Name": "c65af398cdc1",
"Resources": {
"CPUs": 24,
"DiskSize": 11,
"Memory": 2048,
"USBs": []
},
"SSHConfig": {
"IdentityPath": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test1854029609\\.local\\share\\containers\\podman\\machine\\machine",
"Port": 50333,
"RemoteUsername": "core"
},
"State": "running",
"UserModeNetworking": true,
"Rootful": false,
"Rosetta": false
}
]
C>
podman.exe machine start c65af398cdc1
Starting machine "c65af398cdc1"
Error: unable to start "c65af398cdc1": machine c65af398cdc1: VM already running or starting
← Exit [It] start machine already started - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:63 @ 07/31/24 22:14:12.343 (43.993s)
> Enter [DeferCleanup (Each)] podman machine start - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:14:12.343
C>
podman.exe machine rm --force c65af398cdc1
Error: unable to clean up gvproxy: remove C:\Users\ADMINI~1\AppData\Local\Temp\podman\gvproxy.pid: The process cannot access the file because it is being used by another process.
[FAILED] Expected
<int>: 125
to match exit code:
<int>: 0
In [DeferCleanup (Each)] at: C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:94 @ 07/31/24 22:14:14.229
Full Stack Trace
github.com/containers/podman/v5/pkg/machine/e2e_test.(*initMachine).buildCmd.func1()
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:94 +0x1ae
reflect.Value.call({0x7ff7cc4c33c0?, 0xc00019ab60?, 0x0?}, {0x7ff7cc6e01fc, 0x4}, {0x7ff7cd21fc00, 0x0, 0x0?})
C:/Program Files/Go/src/reflect/value.go:596 +0xca6
reflect.Value.Call({0x7ff7cc4c33c0?, 0xc00019ab60?, 0xc00075bf01?}, {0x7ff7cd21fc00?, 0xc00075bfb8?, 0x7ff7cb72cc57?})
C:/Program Files/Go/src/reflect/value.go:380 +0xb9
< Exit [DeferCleanup (Each)] podman machine start - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:14:14.229 (1.886s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/31/24 22:14:14.229
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/31/24 22:14:14.235 (6ms)
+ [FAILED] [45.886 seconds]
podman machine start [DeferCleanup (Each)]
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83
start machine already started
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:63
podman machine start
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:16
start machine with conflict on SSH port
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:84
→ Enter [
It] start machine with conflict on SSH port - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:84 @ 07/31/24 22:14:14.235
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 5e310beee25d
Machine init complete
To start your machine run:
podman machine start 5e310beee25d
C>
podman.exe machine inspect --format {{.SSHConfig.Port}} 5e310beee25d
50346
C>
podman.exe system connection list --format {{.URI}}
ssh://core@127.0.0.1:50346/run/user/1000/podman/podman.sock
ssh://root@127.0.0.1:50346/run/podman/podman.sock
C>
podman.exe machine start 5e310beee25d
Starting machine "5e310beee25d"
time=
"2024-07-31T22:14:34Z" level=
warning msg=
"detected port conflict on machine ssh port [50346], reassigning"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful 5e310beee25d
API forwarding listening on: npipe:////./pipe/podman-5e310beee25d
Another process was listening on the default Docker API socket address.
You can still connect Docker API clients by setting DOCKER_HOST using the
following command in your terminal session:
$Env:DOCKER_HOST="npipe:////./pipe/podman-5e310beee25d"
Machine "5e310beee25d" started successfully
C>
podman.exe machine inspect --format {{.SSHConfig.Port}} 5e310beee25d
50352
C>
podman.exe system connection list --format {{.URI}}
ssh://core@127.0.0.1:50352/run/user/1000/podman/podman.sock
ssh://root@127.0.0.1:50352/run/podman/podman.sock
← Exit [It] start machine with conflict on SSH port - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:84 @ 07/31/24 22:14:57.168 (42.933s)
> Enter [DeferCleanup (Each)] podman machine start - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:14:57.168
C>
podman.exe machine rm --force 5e310beee25d
Error: unable to clean up gvproxy: remove C:\Users\ADMINI~1\AppData\Local\Temp\podman\gvproxy.pid: The process cannot access the file because it is being used by another process.
[FAILED] Expected
<int>: 125
to match exit code:
<int>: 0
In [DeferCleanup (Each)] at: C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:94 @ 07/31/24 22:14:59.047
Full Stack Trace
github.com/containers/podman/v5/pkg/machine/e2e_test.(*initMachine).buildCmd.func1()
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:94 +0x1ae
reflect.Value.call({0x7ff7cc4c33c0?, 0xc00019ae20?, 0x0?}, {0x7ff7cc6e01fc, 0x4}, {0x7ff7cd21fc00, 0x0, 0x0?})
C:/Program Files/Go/src/reflect/value.go:596 +0xca6
reflect.Value.Call({0x7ff7cc4c33c0?, 0xc00019ae20?, 0xc0007dbf01?}, {0x7ff7cd21fc00?, 0xc0007dbfb8?, 0x7ff7cb72cc7a?})
C:/Program Files/Go/src/reflect/value.go:380 +0xb9
< Exit [DeferCleanup (Each)] podman machine start - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:14:59.047 (1.879s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/31/24 22:14:59.047
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/31/24 22:14:59.052 (5ms)
+ [FAILED] [44.817 seconds]
podman machine start [DeferCleanup (Each)]
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83
start machine with conflict on SSH port
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:84
podman machine start
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:16
start only starts specified machine
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:133
→ Enter [
It] start only starts specified machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:133 @ 07/31/24 22:14:59.053
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx c1c6350afd69
Machine init complete
To start your machine run:
podman machine start c1c6350afd69
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx a62293043362
Machine init complete
To start your machine run:
podman machine start a62293043362
C>
podman.exe machine start c1c6350afd69
Starting machine "c1c6350afd69"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful c1c6350afd69
API forwarding listening on: npipe:////./pipe/podman-c1c6350afd69
Another process was listening on the default Docker API socket address.
You can still connect Docker API clients by setting DOCKER_HOST using the
following command in your terminal session:
$Env:DOCKER_HOST="npipe:////./pipe/podman-c1c6350afd69"
Machine "c1c6350afd69" started successfully
C>
podman.exe machine inspect --format {{.State}} c1c6350afd69
running
C>
podman.exe machine inspect --format {{.State}} a62293043362
stopped
← Exit [It] start only starts specified machine - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:133 @ 07/31/24 22:16:02.012 (1m2.959s)
> Enter [DeferCleanup (Each)] podman machine start - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:16:02.012
C>
podman.exe machine rm --force a62293043362
< Exit [DeferCleanup (Each)] podman machine start - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:16:03.411 (1.399s)
> Enter [DeferCleanup (Each)] podman machine start - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:16:03.411
C>
podman.exe machine rm --force c1c6350afd69
Error: unable to clean up gvproxy: remove C:\Users\ADMINI~1\AppData\Local\Temp\podman\gvproxy.pid: The process cannot access the file because it is being used by another process.
[FAILED] Expected
<int>: 125
to match exit code:
<int>: 0
In [DeferCleanup (Each)] at: C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:94 @ 07/31/24 22:16:05.281
Full Stack Trace
github.com/containers/podman/v5/pkg/machine/e2e_test.(*initMachine).buildCmd.func1()
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:94 +0x1ae
reflect.Value.call({0x7ff7cc4c33c0?, 0xc000807420?, 0x7ff7cc529bc0?}, {0x7ff7cc6e01fc, 0x4}, {0x7ff7cd21fc00, 0x0, 0x7ff7cc8d3f20?})
C:/Program Files/Go/src/reflect/value.go:596 +0xca6
reflect.Value.Call({0x7ff7cc4c33c0?, 0xc000807420?, 0x7ff7cbaaddd2?}, {0x7ff7cd21fc00?, 0x0?, 0x0?})
C:/Program Files/Go/src/reflect/value.go:380 +0xb9
< Exit [DeferCleanup (Each)] podman machine start - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:16:05.281 (1.87s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/31/24 22:16:05.281
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/31/24 22:16:05.287 (6ms)
+ [FAILED] [66.235 seconds]
podman machine start [DeferCleanup (Each)]
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83
start only starts specified machine
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:133
podman machine start
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:16
start two machines in parallel
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:166
→ Enter [
It] start two machines in parallel - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:166 @ 07/31/24 22:16:05.288
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx m1-83bf572dbc40
Machine init complete
To start your machine run:
podman machine start m1-83bf572dbc40
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx m2-814c3e060325
Machine init complete
To start your machine run:
podman machine start m2-814c3e060325
C>
podman.exe machine start m2-814c3e060325
C>
podman.exe machine start m1-83bf572dbc40
Starting machine "m1-83bf572dbc40"
Starting machine "m2-814c3e060325"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful m1-83bf572dbc40
API forwarding listening on: npipe:////./pipe/podman-m1-83bf572dbc40
Another process was listening on the default Docker API socket address.
You can still connect Docker API clients by setting DOCKER_HOST using the
following command in your terminal session:
$Env:DOCKER_HOST="npipe:////./pipe/podman-m1-83bf572dbc40"
Machine "m1-83bf572dbc40" started successfully
Error: unable to start "m2-814c3e060325": machine m1-83bf572dbc40: VM already running or starting
← Exit [It] start two machines in parallel - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:166 @ 07/31/24 22:17:07.939 (1m2.651s)
> Enter [DeferCleanup (Each)] podman machine start - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:17:07.939
C>
podman.exe machine rm --force m2-814c3e060325
< Exit [DeferCleanup (Each)] podman machine start - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:17:09.272 (1.333s)
> Enter [DeferCleanup (Each)] podman machine start - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:17:09.272
C>
podman.exe machine rm --force m1-83bf572dbc40
Error: unable to clean up gvproxy: remove C:\Users\ADMINI~1\AppData\Local\Temp\podman\gvproxy.pid: The process cannot access the file because it is being used by another process.
[FAILED] Expected
<int>: 125
to match exit code:
<int>: 0
In [DeferCleanup (Each)] at: C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:94 @ 07/31/24 22:17:11.154
Full Stack Trace
github.com/containers/podman/v5/pkg/machine/e2e_test.(*initMachine).buildCmd.func1()
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:94 +0x1ae
reflect.Value.call({0x7ff7cc4c33c0?, 0xc0000db6c0?, 0x7ff7cc529bc0?}, {0x7ff7cc6e01fc, 0x4}, {0x7ff7cd21fc00, 0x0, 0x7ff7cc8d3f20?})
C:/Program Files/Go/src/reflect/value.go:596 +0xca6
reflect.Value.Call({0x7ff7cc4c33c0?, 0xc0000db6c0?, 0x7ff7cbaaddd2?}, {0x7ff7cd21fc00?, 0x0?, 0x0?})
C:/Program Files/Go/src/reflect/value.go:380 +0xb9
< Exit [DeferCleanup (Each)] podman machine start - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:17:11.154 (1.882s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/31/24 22:17:11.154
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/31/24 22:17:11.16 (6ms)
+ [FAILED] [65.873 seconds]
podman machine start [DeferCleanup (Each)]
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83
start two machines in parallel
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/start_test.go:166
podman machine init
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:22
bad init
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:28
→ Enter [
It] bad init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:28 @ 07/31/24 22:17:11.161
C>
podman.exe machine init --disk-size 11 abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
Error: machine name "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ" must be 30 characters or less
C>
podman.exe machine init --disk-size 11 hyperv
Error: cannot use "hyperv" for a machine name
C>
podman.exe -r system connection add foobar tcp://localhost:8000
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx foobar
Error: system connection "foobar" already exists. consider a different machine name or remove the connection with `podman system connection rm`
C>
podman.exe machine init --disk-size 11 ab/cd
Error: invalid name "ab/cd": names must match [a-zA-Z0-9][a-zA-Z0-9_.-]*: invalid argument
C>
podman.exe machine init --disk-size 11 --username -/a fe57d5c22c4b
Error: invalid username "-/a": names must match [a-zA-Z0-9][a-zA-Z0-9_.-]*: invalid argument
C>
podman.exe machine init --disk-size 11 --memory 197265 fe57d5c22c4b
Error: requested amount of memory (197265 MB) greater than total system memory (205773746176 MB)
C>
podman.exe -r system connection rm foobar
← Exit [It] bad init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:28 @ 07/31/24 22:17:12.231 (1.07s)
> Enter [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:17:12.231
C>
podman.exe machine rm --force fe57d5c22c4b
Error: fe57d5c22c4b: VM does not exist
< Exit [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:17:12.358 (127ms)
> Enter [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:17:12.358
C>
podman.exe machine rm --force fe57d5c22c4b
Error: fe57d5c22c4b: VM does not exist
< Exit [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:17:12.495 (137ms)
> Enter [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:17:12.495
C>
podman.exe machine rm --force ab/cd
Error: ab/cd: VM does not exist
< Exit [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:17:12.631 (136ms)
> Enter [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:17:12.631
C>
podman.exe machine rm --force foobar
Error: foobar: VM does not exist
< Exit [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:17:12.758 (127ms)
> Enter [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:17:12.758
C>
podman.exe machine rm --force hyperv
Error: hyperv: VM does not exist
< Exit [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:17:12.886 (128ms)
> Enter [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:17:12.886
C>
podman.exe machine rm --force abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
Error: abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ: VM does not exist
< Exit [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:17:13.012 (126ms)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/31/24 22:17:13.012
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/31/24 22:17:13.016 (4ms)
+ [1.855 seconds]
podman machine init
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:22
simple init
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:82
→ Enter [
It] simple init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:82 @ 07/31/24 22:17:13.016
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 9daea0230aee
Machine init complete
To start your machine run:
podman machine start 9daea0230aee
C>
podman.exe machine inspect 9daea0230aee
[
{
"ConfigDir": {
"Path": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test1160736408\\.config\\containers\\podman\\machine\\hyperv"
},
"ConnectionInfo": {
"PodmanSocket": null,
"PodmanPipe": {
"Path": "\\\\.\\pipe\\podman-9daea0230aee"
}
},
"Created": "2024-07-31T22:17:13.1829382Z",
"LastUp": "0001-01-01T00:00:00Z",
"Name": "9daea0230aee",
"Resources": {
"CPUs": 24,
"DiskSize": 11,
"Memory": 2048,
"USBs": []
},
"SSHConfig": {
"IdentityPath": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test1160736408\\.local\\share\\containers\\podman\\machine\\machine",
"Port": 50398,
"RemoteUsername": "core"
},
"State": "stopped",
"UserModeNetworking": true,
"Rootful": false,
"Rosetta": false
}
]
← Exit [It] simple init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:82 @ 07/31/24 22:17:32.506 (19.489s)
> Enter [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:17:32.506
C>
podman.exe machine rm --force 9daea0230aee
< Exit [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:17:33.787 (1.281s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/31/24 22:17:33.787
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/31/24 22:17:33.791 (4ms)
+ [20.776 seconds]
podman machine init
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:22
simple init with start
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:101
→ Enter [
It] simple init with start - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:101 @ 07/31/24 22:17:33.791
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 598aa15fd681
Machine init complete
To start your machine run:
podman machine start 598aa15fd681
C>
podman.exe machine inspect 598aa15fd681
[
{
"ConfigDir": {
"Path": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test1174491472\\.config\\containers\\podman\\machine\\hyperv"
},
"ConnectionInfo": {
"PodmanSocket": null,
"PodmanPipe": {
"Path": "\\\\.\\pipe\\podman-598aa15fd681"
}
},
"Created": "2024-07-31T22:17:33.9461994Z",
"LastUp": "0001-01-01T00:00:00Z",
"Name": "598aa15fd681",
"Resources": {
"CPUs": 24,
"DiskSize": 11,
"Memory": 2048,
"USBs": []
},
"SSHConfig": {
"IdentityPath": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test1174491472\\.local\\share\\containers\\podman\\machine\\machine",
"Port": 50404,
"RemoteUsername": "core"
},
"State": "stopped",
"UserModeNetworking": true,
"Rootful": false,
"Rosetta": false
}
]
C>
podman.exe machine start 598aa15fd681
Starting machine "598aa15fd681"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful 598aa15fd681
API forwarding listening on: npipe:////./pipe/podman-598aa15fd681
Another process was listening on the default Docker API socket address.
You can still connect Docker API clients by setting DOCKER_HOST using the
following command in your terminal session:
$Env:DOCKER_HOST="npipe:////./pipe/podman-598aa15fd681"
Machine "598aa15fd681" started successfully
C>
podman.exe machine inspect 598aa15fd681
[
{
"ConfigDir": {
"Path": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test1174491472\\.config\\containers\\podman\\machine\\hyperv"
},
"ConnectionInfo": {
"PodmanSocket": null,
"PodmanPipe": {
"Path": "\\\\.\\pipe\\podman-598aa15fd681"
}
},
"Created": "2024-07-31T22:17:33.9461994Z",
"LastUp": "0001-01-01T00:00:00Z",
"Name": "598aa15fd681",
"Resources": {
"CPUs": 24,
"DiskSize": 11,
"Memory": 2048,
"USBs": []
},
"SSHConfig": {
"IdentityPath": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test1174491472\\.local\\share\\containers\\podman\\machine\\machine",
"Port": 50404,
"RemoteUsername": "core"
},
"State": "running",
"UserModeNetworking": true,
"Rootful": false,
"Rosetta": false
}
]
C>
podman.exe machine ssh 598aa15fd681 sudo systemctl is-enabled zincati
disabled
← Exit [It] simple init with start - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:101 @ 07/31/24 22:18:18.375 (44.584s)
> Enter [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:18:18.375
C>
podman.exe machine rm --force 598aa15fd681
Error: unable to clean up gvproxy: remove C:\Users\ADMINI~1\AppData\Local\Temp\podman\gvproxy.pid: The process cannot access the file because it is being used by another process.
[FAILED] Expected
<int>: 125
to match exit code:
<int>: 0
In [DeferCleanup (Each)] at: C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:94 @ 07/31/24 22:18:20.262
Full Stack Trace
github.com/containers/podman/v5/pkg/machine/e2e_test.(*initMachine).buildCmd.func1()
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:94 +0x1ae
reflect.Value.call({0x7ff7cc4c33c0?, 0xc00019bda0?, 0x0?}, {0x7ff7cc6e01fc, 0x4}, {0x7ff7cd21fc00, 0x0, 0x0?})
C:/Program Files/Go/src/reflect/value.go:596 +0xca6
reflect.Value.Call({0x7ff7cc4c33c0?, 0xc00019bda0?, 0xc0005d1f01?}, {0x7ff7cd21fc00?, 0xc0005d1fb8?, 0x7ff7cb72cc57?})
C:/Program Files/Go/src/reflect/value.go:380 +0xb9
< Exit [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:18:20.262 (1.887s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/31/24 22:18:20.262
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/31/24 22:18:20.267 (5ms)
+ [FAILED] [46.475 seconds]
podman machine init [DeferCleanup (Each)]
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83
simple init with start
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:101
podman machine init
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:22
simple init with username
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:137
→ Enter [
It] simple init with username - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:137 @ 07/31/24 22:18:20.268
C>
podman.exe machine init --disk-size 11 --username remoteuser --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx c52c4b9f9ea1
Machine init complete
To start your machine run:
podman machine start c52c4b9f9ea1
C>
podman.exe machine inspect c52c4b9f9ea1
[
{
"ConfigDir": {
"Path": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test251096371\\.config\\containers\\podman\\machine\\hyperv"
},
"ConnectionInfo": {
"PodmanSocket": null,
"PodmanPipe": {
"Path": "\\\\.\\pipe\\podman-c52c4b9f9ea1"
}
},
"Created": "2024-07-31T22:18:20.4233952Z",
"LastUp": "0001-01-01T00:00:00Z",
"Name": "c52c4b9f9ea1",
"Resources": {
"CPUs": 24,
"DiskSize": 11,
"Memory": 2048,
"USBs": []
},
"SSHConfig": {
"IdentityPath": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test251096371\\.local\\share\\containers\\podman\\machine\\machine",
"Port": 50419,
"RemoteUsername": "remoteuser"
},
"State": "stopped",
"UserModeNetworking": true,
"Rootful": false,
"Rosetta": false
}
]
← Exit [It] simple init with username - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:137 @ 07/31/24 22:18:39.115 (18.847s)
> Enter [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:18:39.115
C>
podman.exe machine rm --force c52c4b9f9ea1
< Exit [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:18:40.381 (1.265s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/31/24 22:18:40.381
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/31/24 22:18:40.386 (5ms)
+ [20.119 seconds]
podman machine init
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:22
machine init with cpus, disk size, memory, timezone
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:159
→ Enter [
It] machine init with cpus, disk size, memory, timezone - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:159 @ 07/31/24 22:18:40.386
C>
podman.exe machine init --cpus 2 --disk-size 102 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx --memory 4096 --timezone Pacific/Honolulu 47bce88e6b39
Machine init complete
To start your machine run:
podman machine start 47bce88e6b39
C>
podman.exe machine start 47bce88e6b39
Starting machine "47bce88e6b39"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful 47bce88e6b39
API forwarding listening on: npipe:////./pipe/podman-47bce88e6b39
Another process was listening on the default Docker API socket address.
You can still connect Docker API clients by setting DOCKER_HOST using the
following command in your terminal session:
$Env:DOCKER_HOST="npipe:////./pipe/podman-47bce88e6b39"
Machine "47bce88e6b39" started successfully
C>
podman.exe machine ssh 47bce88e6b39 lscpu | grep "CPU(s):" | head -1
CPU(s): 2
C>
podman.exe machine ssh 47bce88e6b39 sudo fdisk -l | grep Disk
Disk /dev/sda: 102 GiB, 109521666048 bytes, 213909504 sectors
Disk model: Virtual Disk
Disklabel type: gpt
Disk identifier: 5E1FAADF-65DE-4FF2-9669-F58F88568863
C>
podman.exe machine ssh 47bce88e6b39 cat /proc/meminfo | grep -i 'memtotal' | grep -o '[[:digit:]]*'
4002236
C>
podman.exe machine ssh 47bce88e6b39 date
Wed Jul 31 12:19:47 HST 2024
← Exit [It] machine init with cpus, disk size, memory, timezone - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:159 @ 07/31/24 22:19:47.278 (1m6.893s)
> Enter [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:19:47.278
C>
podman.exe machine rm --force 47bce88e6b39
Error: unable to clean up gvproxy: remove C:\Users\ADMINI~1\AppData\Local\Temp\podman\gvproxy.pid: The process cannot access the file because it is being used by another process.
[FAILED] Expected
<int>: 125
to match exit code:
<int>: 0
In [DeferCleanup (Each)] at: C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:94 @ 07/31/24 22:19:49.139
Full Stack Trace
github.com/containers/podman/v5/pkg/machine/e2e_test.(*initMachine).buildCmd.func1()
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:94 +0x1ae
reflect.Value.call({0x7ff7cc4c33c0?, 0xc000807640?, 0x0?}, {0x7ff7cc6e01fc, 0x4}, {0x7ff7cd21fc00, 0x0, 0x0?})
C:/Program Files/Go/src/reflect/value.go:596 +0xca6
reflect.Value.Call({0x7ff7cc4c33c0?, 0xc000807640?, 0xc00078df01?}, {0x7ff7cd21fc00?, 0xc00078dfb8?, 0x7ff7cb72cc7a?})
C:/Program Files/Go/src/reflect/value.go:380 +0xb9
< Exit [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:19:49.139 (1.861s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/31/24 22:19:49.139
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/31/24 22:19:49.144 (5ms)
+ [FAILED] [68.758 seconds]
podman machine init [DeferCleanup (Each)]
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83
machine init with cpus, disk size, memory, timezone
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:159
podman machine init
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:22
machine init rootless docker.sock check
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:227
→ Enter [
It] machine init rootless docker.sock check - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:227 @ 07/31/24 22:19:49.146
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 067e5f86cede
Machine init complete
To start your machine run:
podman machine start 067e5f86cede
C>
podman.exe machine start 067e5f86cede
Starting machine "067e5f86cede"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful 067e5f86cede
API forwarding listening on: npipe:////./pipe/podman-067e5f86cede
Another process was listening on the default Docker API socket address.
You can still connect Docker API clients by setting DOCKER_HOST using the
following command in your terminal session:
$Env:DOCKER_HOST="npipe:////./pipe/podman-067e5f86cede"
Machine "067e5f86cede" started successfully
C>
podman.exe machine ssh 067e5f86cede readlink /var/run/docker.sock
/run/user/1000/podman/podman.sock
← Exit [It] machine init rootless docker.sock check - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:227 @ 07/31/24 22:20:34.839 (45.693s)
> Enter [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:20:34.839
C>
podman.exe machine rm --force 067e5f86cede
Error: unable to clean up gvproxy: remove C:\Users\ADMINI~1\AppData\Local\Temp\podman\gvproxy.pid: The process cannot access the file because it is being used by another process.
[FAILED] Expected
<int>: 125
to match exit code:
<int>: 0
In [DeferCleanup (Each)] at: C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:94 @ 07/31/24 22:20:36.734
Full Stack Trace
github.com/containers/podman/v5/pkg/machine/e2e_test.(*initMachine).buildCmd.func1()
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:94 +0x1ae
reflect.Value.call({0x7ff7cc4c33c0?, 0xc000750f20?, 0x0?}, {0x7ff7cc6e01fc, 0x4}, {0x7ff7cd21fc00, 0x0, 0x0?})
C:/Program Files/Go/src/reflect/value.go:596 +0xca6
reflect.Value.Call({0x7ff7cc4c33c0?, 0xc000750f20?, 0xc000429f01?}, {0x7ff7cd21fc00?, 0xc000429fb8?, 0x7ff7cb72cc57?})
C:/Program Files/Go/src/reflect/value.go:380 +0xb9
< Exit [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:20:36.734 (1.895s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/31/24 22:20:36.734
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/31/24 22:20:36.739 (5ms)
+ [FAILED] [47.593 seconds]
podman machine init [DeferCleanup (Each)]
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83
machine init rootless docker.sock check
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:227
podman machine init
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:22
machine init rootful with docker.sock check
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:250
→ Enter [
It] machine init rootful with docker.sock check - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:250 @ 07/31/24 22:20:36.739
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx --rootful ae12c1325d1b
Machine init complete
To start your machine run:
podman machine start ae12c1325d1b
C>
podman.exe machine start ae12c1325d1b
Starting machine "ae12c1325d1b"
API forwarding listening on: npipe:////./pipe/podman-ae12c1325d1b
Another process was listening on the default Docker API socket address.
You can still connect Docker API clients by setting DOCKER_HOST using the
following command in your terminal session:
$Env:DOCKER_HOST="npipe:////./pipe/podman-ae12c1325d1b"
Machine "ae12c1325d1b" started successfully
C>
podman.exe machine inspect --format {{.Rootful}} ae12c1325d1b
true
C>
podman.exe machine ssh ae12c1325d1b readlink /var/run/docker.sock
/run/podman/podman.sock
← Exit [It] machine init rootful with docker.sock check - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:250 @ 07/31/24 22:21:20.76 (44.02s)
> Enter [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:21:20.76
C>
podman.exe machine rm --force ae12c1325d1b
Error: unable to clean up gvproxy: remove C:\Users\ADMINI~1\AppData\Local\Temp\podman\gvproxy.pid: The process cannot access the file because it is being used by another process.
[FAILED] Expected
<int>: 125
to match exit code:
<int>: 0
In [DeferCleanup (Each)] at: C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:94 @ 07/31/24 22:21:22.63
Full Stack Trace
github.com/containers/podman/v5/pkg/machine/e2e_test.(*initMachine).buildCmd.func1()
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:94 +0x1ae
reflect.Value.call({0x7ff7cc4c33c0?, 0xc0003a31e0?, 0x0?}, {0x7ff7cc6e01fc, 0x4}, {0x7ff7cd21fc00, 0x0, 0x0?})
C:/Program Files/Go/src/reflect/value.go:596 +0xca6
reflect.Value.Call({0x7ff7cc4c33c0?, 0xc0003a31e0?, 0xc000733f01?}, {0x7ff7cd21fc00?, 0xc000733fb8?, 0x7ff7cb72cc7a?})
C:/Program Files/Go/src/reflect/value.go:380 +0xb9
< Exit [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:21:22.63 (1.87s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/31/24 22:21:22.63
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/31/24 22:21:22.635 (5ms)
+ [FAILED] [45.896 seconds]
podman machine init [DeferCleanup (Each)]
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83
machine init rootful with docker.sock check
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:250
podman machine init
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:22
init should cleanup on failure
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:277
→ Enter [
It] init should cleanup on failure - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:277 @ 07/31/24 22:21:22.636
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx a76091fbcd73
Machine init complete
To start your machine run:
podman machine start a76091fbcd73
C>
podman.exe machine inspect --format {{.ConfigDir.Path}} a76091fbcd73
C:\Users\ADMINI~1\AppData\Local\Temp\podman_test3744670472\.config\containers\podman\machine\hyperv
C>
podman.exe machine rm --force a76091fbcd73
C>
podman.exe machine inspect a76091fbcd73
[]
Error: a76091fbcd73: VM does not exist
C>
podman.exe machine init --disk-size 11 --ignition-path /bad/path --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx a76091fbcd73
Error: open /bad/path: The system cannot find the path specified.
← Exit [It] init should cleanup on failure - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:277 @ 07/31/24 22:21:46.893 (24.257s)
> Enter [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:21:46.894
C>
podman.exe machine rm --force a76091fbcd73
Error: a76091fbcd73: VM does not exist
< Exit [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:21:47.021 (127ms)
> Enter [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:21:47.021
C>
podman.exe machine rm --force a76091fbcd73
Error: a76091fbcd73: VM does not exist
< Exit [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:21:47.146 (125ms)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/31/24 22:21:47.146
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/31/24 22:21:47.152 (6ms)
+ [24.517 seconds]
podman machine init
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:22
verify a podman 4 config does not break podman 5
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:326
→ Enter [
It] verify a podman 4 config does not break podman 5 - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:326 @ 07/31/24 22:21:47.153
C>
podman.exe machine list
time=
"2024-07-31T22:21:47Z" level=
error msg=
"incompatible machine config \"C:\\\\Users\\\\ADMINI~1\\\\AppData\\\\Local\\\\Temp\\\\podman_test2110650048\\\\.config\\\\containers\\\\podman\\\\machine\\\\hyperv\\\\foobar-machine.json\" (podman-machine-default) for this version of Podman"
NAME VM TYPE CREATED LAST UP CPUS MEMORY DISK SIZE
C>
podman.exe machine inspect foobar-machine
[]
Error: incompatible machine config "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test2110650048\\.config\\containers\\podman\\machine\\hyperv\\foobar-machine.json" (foobar-machine) for this version of Podman
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 27d4a6ea5597
time=
"2024-07-31T22:21:47Z" level=
error msg=
"incompatible machine config \"C:\\\\Users\\\\ADMINI~1\\\\AppData\\\\Local\\\\Temp\\\\podman_test2110650048\\\\.config\\\\containers\\\\podman\\\\machine\\\\hyperv\\\\foobar-machine.json\" (podman-machine-default) for this version of Podman"
Machine init complete
To start your machine run:
podman machine start 27d4a6ea5597
C>
podman.exe machine list
time=
"2024-07-31T22:22:06Z" level=
error msg=
"incompatible machine config \"C:\\\\Users\\\\ADMINI~1\\\\AppData\\\\Local\\\\Temp\\\\podman_test2110650048\\\\.config\\\\containers\\\\podman\\\\machine\\\\hyperv\\\\foobar-machine.json\" (podman-machine-default) for this version of Podman"
NAME VM TYPE CREATED LAST UP CPUS MEMORY DISK SIZE
27d4a6ea5597* hyperv 19 seconds ago Never 24 2GiB 11GiB
C>
podman.exe machine inspect 27d4a6ea5597
[
{
"ConfigDir": {
"Path": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test2110650048\\.config\\containers\\podman\\machine\\hyperv"
},
"ConnectionInfo": {
"PodmanSocket": null,
"PodmanPipe": {
"Path": "\\\\.\\pipe\\podman-27d4a6ea5597"
}
},
"Created": "2024-07-31T22:21:47.589515Z",
"LastUp": "0001-01-01T00:00:00Z",
"Name": "27d4a6ea5597",
"Resources": {
"CPUs": 24,
"DiskSize": 11,
"Memory": 2048,
"USBs": []
},
"SSHConfig": {
"IdentityPath": "C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\podman_test2110650048\\.local\\share\\containers\\podman\\machine\\machine",
"Port": 50483,
"RemoteUsername": "core"
},
"State": "stopped",
"UserModeNetworking": true,
"Rootful": false,
"Rosetta": false
}
]
← Exit [It] verify a podman 4 config does not break podman 5 - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/init_test.go:326 @ 07/31/24 22:22:06.85 (19.697s)
> Enter [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:22:06.85
C>
podman.exe machine rm --force 27d4a6ea5597
< Exit [DeferCleanup (Each)] podman machine init - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:22:08.127 (1.277s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/31/24 22:22:08.127
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/31/24 22:22:08.132 (6ms)
+ [20.980 seconds]
podman machine proxy settings propagation
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/proxy_test.go:13
ssh to running machine and check proxy settings
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/proxy_test.go:15
→ Enter [
It] ssh to running machine and check proxy settings - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/proxy_test.go:15 @ 07/31/24 22:22:08.137
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx bb67702128bb
Machine init complete
To start your machine run:
podman machine start bb67702128bb
C>
podman.exe machine start bb67702128bb
Starting machine "bb67702128bb"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful bb67702128bb
API forwarding listening on: npipe:////./pipe/podman-bb67702128bb
Another process was listening on the default Docker API socket address.
You can still connect Docker API clients by setting DOCKER_HOST using the
following command in your terminal session:
$Env:DOCKER_HOST="npipe:////./pipe/podman-bb67702128bb"
Machine "bb67702128bb" started successfully
C>
podman.exe machine ssh bb67702128bb printenv HTTP_PROXY
http://abcdefghijklmnopqrstuvwxyz-proxy
C>
podman.exe machine ssh bb67702128bb printenv HTTPS_PROXY
http://abcdefghijklmnopqrstuvwxyz-proxy
C>
podman.exe machine ssh bb67702128bb printenv SSL_CERT_DIR SSL_CERT_FILE
/etc/containers/certs.d
/etc/containers/certs.d/cert1
C>
podman.exe machine ssh bb67702128bb cat $SSL_CERT_DIR/cert2 $SSL_CERT_FILE
cert2 content
cert1 content
C>
podman.exe machine stop bb67702128bb
Error: unable to clean up gvproxy: remove C:\Users\ADMINI~1\AppData\Local\Temp\podman\gvproxy.pid: The process cannot access the file because it is being used by another process.
[FAILED] Expected
<int>: 125
to match exit code:
<int>: 0
In [It] at: C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/proxy_test.go:76 @ 07/31/24 22:23:01.529
Full Stack Trace
github.com/containers/podman/v5/pkg/machine/e2e_test.init.func12.1()
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/proxy_test.go:76 +0x1007
← Exit [It] ssh to running machine and check proxy settings - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/proxy_test.go:15 @ 07/31/24 22:23:01.529 (53.392s)
> Enter [DeferCleanup (Each)] podman machine proxy settings propagation - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:23:01.529
C>
podman.exe machine rm --force bb67702128bb
< Exit [DeferCleanup (Each)] podman machine proxy settings propagation - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:23:02.897 (1.368s)
> Enter [DeferCleanup (Each)] podman machine proxy settings propagation - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/vendor/github.com/onsi/ginkgo/v2/internal/testingtproxy/testing_t_proxy.go:153 @ 07/31/24 22:23:02.897
< Exit [DeferCleanup (Each)] podman machine proxy settings propagation - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/vendor/github.com/onsi/ginkgo/v2/internal/testingtproxy/testing_t_proxy.go:153 @ 07/31/24 22:23:02.898 (1ms)
> Enter [DeferCleanup (Each)] podman machine proxy settings propagation - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/vendor/github.com/onsi/ginkgo/v2/internal/testingtproxy/testing_t_proxy.go:153 @ 07/31/24 22:23:02.898
< Exit [DeferCleanup (Each)] podman machine proxy settings propagation - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/vendor/github.com/onsi/ginkgo/v2/internal/testingtproxy/testing_t_proxy.go:153 @ 07/31/24 22:23:02.898 (0s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/31/24 22:23:02.898
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/31/24 22:23:02.903 (5ms)
+ [FAILED] [54.767 seconds]
podman machine proxy settings propagation
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/proxy_test.go:13
[It] ssh to running machine and check proxy settings
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/proxy_test.go:15
podman machine set
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:15
set machine cpus, disk, memory
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:17
→ Enter [
It] set machine cpus, disk, memory - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:17 @ 07/31/24 22:23:02.904
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 5c4c878a84e8
Machine init complete
To start your machine run:
podman machine start 5c4c878a84e8
C>
podman.exe machine set --memory 524288 5c4c878a84e8
Error: requested amount of memory (524288 MB) greater than total system memory (205773746176 MB)
C>
podman.exe machine set --cpus 2 --disk-size 102 --memory 4096 5c4c878a84e8
C>
podman.exe machine set --cpus 2 --disk-size 5 --memory 4096 5c4c878a84e8
Error: new disk size must be larger than 102 GB
C>
podman.exe machine start 5c4c878a84e8
Starting machine "5c4c878a84e8"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful 5c4c878a84e8
API forwarding listening on: npipe:////./pipe/podman-5c4c878a84e8
Another process was listening on the default Docker API socket address.
You can still connect Docker API clients by setting DOCKER_HOST using the
following command in your terminal session:
$Env:DOCKER_HOST="npipe:////./pipe/podman-5c4c878a84e8"
Machine "5c4c878a84e8" started successfully
C>
podman.exe machine ssh 5c4c878a84e8 lscpu | grep "CPU(s):" | head -1
CPU(s): 2
C>
podman.exe machine ssh 5c4c878a84e8 sudo fdisk -l | grep Disk
Disk /dev/sda: 102 GiB, 109521666048 bytes, 213909504 sectors
Disk model: Virtual Disk
Disklabel type: gpt
Disk identifier: E671E666-5BEF-44EE-AEEE-75B1F0D7802F
C>
podman.exe machine ssh 5c4c878a84e8 cat /proc/meminfo | grep -i 'memtotal' | grep -o '[[:digit:]]*'
4002240
C>
podman.exe machine set --cpus 4 --disk-size 5 --memory 4096 5c4c878a84e8
Error: new disk size must be larger than 102 GB
← Exit [It] set machine cpus, disk, memory - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:17 @ 07/31/24 22:24:07.018 (1m4.114s)
> Enter [DeferCleanup (Each)] podman machine set - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:24:07.018
C>
podman.exe machine rm --force 5c4c878a84e8
Error: unable to clean up gvproxy: remove C:\Users\ADMINI~1\AppData\Local\Temp\podman\gvproxy.pid: The process cannot access the file because it is being used by another process.
[FAILED] Expected
<int>: 125
to match exit code:
<int>: 0
In [DeferCleanup (Each)] at: C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:94 @ 07/31/24 22:24:08.714
Full Stack Trace
github.com/containers/podman/v5/pkg/machine/e2e_test.(*initMachine).buildCmd.func1()
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:94 +0x1ae
reflect.Value.call({0x7ff7cc4c33c0?, 0xc00020cfa0?, 0x0?}, {0x7ff7cc6e01fc, 0x4}, {0x7ff7cd21fc00, 0x0, 0x0?})
C:/Program Files/Go/src/reflect/value.go:596 +0xca6
reflect.Value.Call({0x7ff7cc4c33c0?, 0xc00020cfa0?, 0xc000735f01?}, {0x7ff7cd21fc00?, 0xc000735fb8?, 0x7ff7cb72cc57?})
C:/Program Files/Go/src/reflect/value.go:380 +0xb9
< Exit [DeferCleanup (Each)] podman machine set - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:24:08.714 (1.697s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/31/24 22:24:08.714
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/31/24 22:24:08.719 (5ms)
+ [FAILED] [65.816 seconds]
podman machine set [DeferCleanup (Each)]
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83
set machine cpus, disk, memory
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:17
podman machine set
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:15
wsl cannot change disk, memory, processor
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:72
→ Enter [
It] wsl cannot change disk, memory, processor - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:72 @ 07/31/24 22:24:08.72
[SKIPPED] tests are only for WSL provider
In [It] at: C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_test.go:260 @ 07/31/24 22:24:08.72
Full Stack Trace
github.com/containers/podman/v5/pkg/machine/e2e_test.skipIfNotVmtype(0x1, {0x7ff7cc70a6da, 0x1f})
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_test.go:260 +0x5b
github.com/containers/podman/v5/pkg/machine/e2e_test.init.func15.2()
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:73 +0x30
← Exit [It] wsl cannot change disk, memory, processor - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:72 @ 07/31/24 22:24:08.72 (0s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/31/24 22:24:08.72
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/31/24 22:24:08.721 (1ms)
S [SKIPPED] [0.002 seconds]
podman machine set
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:15
[It] wsl cannot change disk, memory, processor
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:72
podman machine set
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:15
no settings should change if no flags
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:97
→ Enter [
It] no settings should change if no flags - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:97 @ 07/31/24 22:24:08.721
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx e45d87c10206
Machine init complete
To start your machine run:
podman machine start e45d87c10206
C>
podman.exe machine set e45d87c10206
C>
podman.exe machine start e45d87c10206
Starting machine "e45d87c10206"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful e45d87c10206
API forwarding listening on: npipe:////./pipe/podman-e45d87c10206
Another process was listening on the default Docker API socket address.
You can still connect Docker API clients by setting DOCKER_HOST using the
following command in your terminal session:
$Env:DOCKER_HOST="npipe:////./pipe/podman-e45d87c10206"
Machine "e45d87c10206" started successfully
C>
podman.exe machine ssh e45d87c10206 lscpu | grep "CPU(s):" | head -1
CPU(s): 24
C>
podman.exe machine ssh e45d87c10206 sudo fdisk -l | grep Disk
Disk /dev/sda: 11 GiB, 11811160064 bytes, 23068672 sectors
Disk model: Virtual Disk
Disklabel type: gpt
Disk identifier: B01B9914-0099-435A-8E50-161B14F9FCF9
← Exit [It] no settings should change if no flags - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:97 @ 07/31/24 22:24:55.957 (47.236s)
> Enter [DeferCleanup (Each)] podman machine set - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:24:55.957
C>
podman.exe machine rm --force e45d87c10206
Error: unable to clean up gvproxy: remove C:\Users\ADMINI~1\AppData\Local\Temp\podman\gvproxy.pid: The process cannot access the file because it is being used by another process.
[FAILED] Expected
<int>: 125
to match exit code:
<int>: 0
In [DeferCleanup (Each)] at: C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:94 @ 07/31/24 22:24:57.843
Full Stack Trace
github.com/containers/podman/v5/pkg/machine/e2e_test.(*initMachine).buildCmd.func1()
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:94 +0x1ae
reflect.Value.call({0x7ff7cc4c33c0?, 0xc0003a3620?, 0x0?}, {0x7ff7cc6e01fc, 0x4}, {0x7ff7cd21fc00, 0x0, 0x0?})
C:/Program Files/Go/src/reflect/value.go:596 +0xca6
reflect.Value.Call({0x7ff7cc4c33c0?, 0xc0003a3620?, 0xc000aa9f01?}, {0x7ff7cd21fc00?, 0xc000aa9fb8?, 0x7ff7cb72cc7a?})
C:/Program Files/Go/src/reflect/value.go:380 +0xb9
< Exit [DeferCleanup (Each)] podman machine set - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:24:57.843 (1.886s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/31/24 22:24:57.843
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/31/24 22:24:57.848 (5ms)
+ [FAILED] [49.127 seconds]
podman machine set [DeferCleanup (Each)]
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83
no settings should change if no flags
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:97
podman machine set
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:15
set rootful with docker sock change
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:132
→ Enter [
It] set rootful with docker sock change - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:132 @ 07/31/24 22:24:57.849
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx a4d538864681
Machine init complete
To start your machine run:
podman machine start a4d538864681
C>
podman.exe machine set --rootful a4d538864681
C>
podman.exe machine start a4d538864681
Starting machine "a4d538864681"
API forwarding listening on: npipe:////./pipe/podman-a4d538864681
Another process was listening on the default Docker API socket address.
You can still connect Docker API clients by setting DOCKER_HOST using the
following command in your terminal session:
$Env:DOCKER_HOST="npipe:////./pipe/podman-a4d538864681"
Machine "a4d538864681" started successfully
C>
podman.exe machine inspect --format {{.Rootful}} a4d538864681
true
C>
podman.exe machine ssh a4d538864681 readlink /var/run/docker.sock
/run/podman/podman.sock
← Exit [It] set rootful with docker sock change - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:132 @ 07/31/24 22:25:41.223 (43.373s)
> Enter [DeferCleanup (Each)] podman machine set - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:25:41.223
C>
podman.exe machine rm --force a4d538864681
Error: unable to clean up gvproxy: remove C:\Users\ADMINI~1\AppData\Local\Temp\podman\gvproxy.pid: The process cannot access the file because it is being used by another process.
[FAILED] Expected
<int>: 125
to match exit code:
<int>: 0
In [DeferCleanup (Each)] at: C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:94 @ 07/31/24 22:25:43.125
Full Stack Trace
github.com/containers/podman/v5/pkg/machine/e2e_test.(*initMachine).buildCmd.func1()
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:94 +0x1ae
reflect.Value.call({0x7ff7cc4c33c0?, 0xc000807b20?, 0x0?}, {0x7ff7cc6e01fc, 0x4}, {0x7ff7cd21fc00, 0x0, 0x0?})
C:/Program Files/Go/src/reflect/value.go:596 +0xca6
reflect.Value.Call({0x7ff7cc4c33c0?, 0xc000807b20?, 0xc000525f01?}, {0x7ff7cd21fc00?, 0xc000525fb8?, 0x7ff7cb72cc7a?})
C:/Program Files/Go/src/reflect/value.go:380 +0xb9
< Exit [DeferCleanup (Each)] podman machine set - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:25:43.125 (1.902s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/31/24 22:25:43.125
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/31/24 22:25:43.13 (5ms)
+ [FAILED] [45.282 seconds]
podman machine set [DeferCleanup (Each)]
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83
set rootful with docker sock change
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:132
podman machine set
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:15
set while machine already running
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:190
→ Enter [
It] set while machine already running - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:190 @ 07/31/24 22:25:43.132
C>
podman.exe machine init --disk-size 11 --image C:\Users\ADMINI~1\AppData\Local\Temp\podman-machine-daily.x86_64.hyperv.vhdx 7dd22213119a
Machine init complete
To start your machine run:
podman machine start 7dd22213119a
C>
podman.exe machine start 7dd22213119a
Starting machine "7dd22213119a"
This machine is currently configured in rootless mode. If your containers
require root permissions (e.g. ports < 1024), or if you run into compatibility
issues with non-podman clients, you can switch using the following command:
podman machine set --rootful 7dd22213119a
API forwarding listening on: npipe:////./pipe/podman-7dd22213119a
Another process was listening on the default Docker API socket address.
You can still connect Docker API clients by setting DOCKER_HOST using the
following command in your terminal session:
$Env:DOCKER_HOST="npipe:////./pipe/podman-7dd22213119a"
Machine "7dd22213119a" started successfully
C>
podman.exe machine set --rootful 7dd22213119a
Error: unable to change settings unless vm is stopped
← Exit [It] set while machine already running - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:190 @ 07/31/24 22:26:25.279 (42.147s)
> Enter [DeferCleanup (Each)] podman machine set - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:26:25.279
C>
podman.exe machine rm --force 7dd22213119a
Error: unable to clean up gvproxy: remove C:\Users\ADMINI~1\AppData\Local\Temp\podman\gvproxy.pid: The process cannot access the file because it is being used by another process.
[FAILED] Expected
<int>: 125
to match exit code:
<int>: 0
In [DeferCleanup (Each)] at: C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:94 @ 07/31/24 22:26:27.165
Full Stack Trace
github.com/containers/podman/v5/pkg/machine/e2e_test.(*initMachine).buildCmd.func1()
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:94 +0x1ae
reflect.Value.call({0x7ff7cc4c33c0?, 0xc0003a3560?, 0x0?}, {0x7ff7cc6e01fc, 0x4}, {0x7ff7cd21fc00, 0x0, 0x0?})
C:/Program Files/Go/src/reflect/value.go:596 +0xca6
reflect.Value.Call({0x7ff7cc4c33c0?, 0xc0003a3560?, 0xc00051ff01?}, {0x7ff7cd21fc00?, 0xc00051ffb8?, 0x7ff7cb72cc7a?})
C:/Program Files/Go/src/reflect/value.go:380 +0xb9
< Exit [DeferCleanup (Each)] podman machine set - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83 @ 07/31/24 22:26:27.165 (1.886s)
> Enter [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/31/24 22:26:27.165
< Exit [DeferCleanup (Each)] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:187 @ 07/31/24 22:26:27.171 (6ms)
+ [FAILED] [44.040 seconds]
podman machine set [DeferCleanup (Each)]
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/config_init_test.go:83
set while machine already running
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/set_test.go:190
[SynchronizedAfterSuite]
C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:96
→ Enter [
SynchronizedAfterSuite] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:96 @ 07/31/24 22:26:27.171
podman inspect stop inspect shows a unique socket name per machine 0.000000 seconds
run basic podman commands Volume ops 0.000000 seconds
run basic podman commands Volume should be virtiofs 0.000000 seconds
podman machine init machine init with rosetta=false 0.000539 seconds
podman machine init machine init with volume 0.001000 seconds
podman machine set wsl cannot change disk, memory, processor 0.001000 seconds
podman machine set set user mode networking 0.001001 seconds
podman machine init machine init with rosetta=true 0.001158 seconds
podman machine init - windows only init should not overwrite existing WSL vms 0.103054 seconds
podman machine start bad start name 0.125275 seconds
podman machine init - windows only init with user mode networking 0.128782 seconds
podman inspect stop inspect bad name 0.135710 seconds
podman machine reset starting from scratch should not error 0.135984 seconds
podman machine ssh bad machine name 0.139234 seconds
podman machine rm bad init name 0.140293 seconds
podman machine stop stop bad name 0.220427 seconds
podman machine init bad init 1.071017 seconds
podman machine init - windows only init should not should not overwrite existing HyperV vms 2.001757 seconds
podman machine list list machine in machine-readable byte format 18.657519 seconds
podman machine list list machine in human-readable format 18.692704 seconds
podman machine init simple init with username 18.848148 seconds
podman inspect stop inspect with go format 19.155833 seconds
podman machine list list with --format 19.438087 seconds
podman machine init simple init 19.489947 seconds
podman machine init verify a podman 4 config does not break podman 5 19.697091 seconds
podman machine info machine info 19.838777 seconds
podman machine list list machine 20.235657 seconds
podman machine rm Remove machine 20.290189 seconds
podman machine rm Removing all machines doesn't delete ssh keys 20.430159 seconds
podman machine rm machine rm --save-ignition --save-image 20.878992 seconds
podman machine reset reset machine with one defined machine 21.384042 seconds
podman machine ssh ssh to non-running machine 22.705199 seconds
podman machine init init should cleanup on failure 24.258730 seconds
podman inspect stop inspect two machines 37.747825 seconds
podman machine list list machines with quiet or noheading 40.074025 seconds
podman machine set set while machine already running 42.147944 seconds
podman machine start start machine with conflict on SSH port 42.933367 seconds
podman machine list list machine: check if running while starting 43.105102 seconds
podman machine set set rootful with docker sock change 43.374425 seconds
podman machine start start machine already started 43.994075 seconds
podman machine init machine init rootful with docker.sock check 44.020466 seconds
podman machine init simple init with start 44.583638 seconds
podman machine rm Remove running machine 45.220641 seconds
run basic podman commands podman volume on non-standard path 45.634864 seconds
podman machine init machine init rootless docker.sock check 45.692529 seconds
run basic podman commands Podman ops with port forwarding and gvproxy 46.747928 seconds
podman machine set no settings should change if no flags 47.235950 seconds
run basic podman commands Volume should be disabled by command line 47.708351 seconds
run basic podman commands Basic ops 47.967108 seconds
podman machine ssh ssh to running machine and check os-type 48.807362 seconds
podman machine proxy settings propagation ssh to running machine and check proxy settings 53.392526 seconds
podman machine stop Stop running machine 56.186092 seconds
podman machine start start two machines in parallel 62.651782 seconds
podman machine start start only starts specified machine 62.960076 seconds
podman machine set set machine cpus, disk, memory 64.114635 seconds
podman machine rm Remove machine sharing ssh key with another machine 66.054205 seconds
podman machine init machine init with cpus, disk size, memory, timezone 66.892544 seconds
podman machine reset reset with running machine and other machines idle 70.727704 seconds
podman machine start start simple machine 619.793775 seconds
← Exit [SynchronizedAfterSuite] TOP-LEVEL - C:/Users/Administrator/AppData/Local/cirrus-ci-build/repo
/pkg/machine/e2e/machine_test.go:96 @ 07/31/24 22:26:27.171 (0s)
[SynchronizedAfterSuite] PASSED [0.000 seconds]
Processed Wed Jul 31 22:26:27 2024 by C:\Users\Administrator\AppData\Local\cirrus-ci-build\repo\contrib\cirrus\logformatter v0.3